linux-kernel - Re: mcelog stalls on 2.6.39-rc5

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20110427230333.GD2135@linux.vnet.ibm.com>
Date:	Wed, 27 Apr 2011 16:03:33 -0700
From:	"Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>
To:	Jim Schutt <jaschut@...dia.gov>
Cc:	linux-kernel@...r.kernel.org
Subject: Re: mcelog stalls on 2.6.39-rc5

On Wed, Apr 27, 2011 at 01:59:01PM -0600, Jim Schutt wrote:
> Hi,
> 
> Testing 2.6.39-rc5 is giving me the following stall:
> 
>     [ 5767.731001] INFO: rcu_sched_state detected stall on CPU 1 (t=60001 jiffies)
>     [ 5767.732001] INFO: rcu_sched_state detected stalls on CPUs/tasks: { 1} (detected by 0, t=60002 jiffies)
>     [ 5947.763001] INFO: rcu_sched_state detected stall on CPU 1 (t=240032 jiffies)
>     [ 5947.764001] INFO: rcu_sched_state detected stalls on CPUs/tasks: { 1} (detected by 0, t=240034 jiffies)
>     [ 6024.489362] libceph: mon0 172.17.40.34:6789 socket closed
>     [ 6121.281139] INFO: task mcelog:6513 blocked for more than 120 seconds.
>     [ 6121.287575] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>     [ 6121.295397]  ffff880177aefce8 0000000000000082 ffffffff810339b6 ffff880226d35a40
>     [ 6121.302840]  ffff88018226c3b0 ffff88018226c3b0 0000000000011e80 ffff880226d35a40
>     [ 6121.310284]  ffff88018226c760 ffff880177aefe80 ffff880177aefd18 ffffffff813af047
>     [ 6121.317725] Call Trace:
>     [ 6121.320176]  [<ffffffff810339b6>] ? calc_load_account_idle+0xe/0x1d
>     [ 6121.326437]  [<ffffffff813af047>] schedule+0x159/0x193
>     [ 6121.331569]  [<ffffffff813af449>] schedule_timeout+0x36/0xe2
>     [ 6121.337223]  [<ffffffff810ad9eb>] ? trace_hardirqs_on+0x9/0x20
>     [ 6121.343047]  [<ffffffff813aee2b>] do_wait_for_common+0x97/0xe3
>     [ 6121.348967]  [<ffffffff8103e8fa>] ? try_to_wake_up+0x200/0x200
>     [ 6121.354794]  [<ffffffff8107a4bf>] ? __raw_spin_lock_irq+0x17/0x2f
>     [ 6121.360878]  [<ffffffff813af2a9>] wait_for_common+0x36/0x4d
>     [ 6121.366441]  [<ffffffff813af378>] wait_for_completion+0x1d/0x1f
>     [ 6121.372356]  [<ffffffff8109ae6d>] synchronize_sched+0x40/0x49
>     [ 6121.378096]  [<ffffffff810635b8>] ? find_get_pid+0x1b/0x1b
>     [ 6121.383574]  [<ffffffff81015fe5>] mce_read+0x17f/0x25d
>     [ 6121.388707]  [<ffffffff81111af5>] ? rw_verify_area+0xac/0xdb
>     [ 6121.394358]  [<ffffffff811121f1>] vfs_read+0xa9/0xe1
>     [ 6121.399317]  [<ffffffff8111248d>] sys_read+0x4c/0x70
>     [ 6121.404278]  [<ffffffff813b6deb>] system_call_fastpath+0x16/0x1b
>     [ 6127.795001] INFO: rcu_sched_state detected stall on CPU 1 (t=420064 jiffies)
>     [ 6127.796001] INFO: rcu_sched_state detected stalls on CPUs/tasks: { 1} (detected by 0, t=420066 jiffies)
>     [ 6241.410171] INFO: task mcelog:6513 blocked for more than 120 seconds.
> 
> Reverting commit a4dd99250dc makes the stalls go away:
> 
>     rcu: create new rcu_access_index() and use in mce
> 
>     The MCE subsystem needs to sample an RCU-protected index outside of
>     any protection for that index.  If this was a pointer, we would use
>     rcu_access_pointer(), but there is no corresponding rcu_access_index().
>     This commit therefore creates an rcu_access_index() and applies it
>     to MCE.
> 
>     Signed-off-by: Paul E. McKenney <paulmck@...ux.vnet.ibm.com>
>     Tested-by: Zdenek Kabelac <zkabelac@...hat.com>

Wow!  This is just instructions, just wrapping the access in
ACCESS_ONCE().

Was the original RCU CPU stall repeatable?

							Thanx, Paul

> Here's some bits from my config that might be relevant:
> 
> # RCU Subsystem
> CONFIG_TREE_RCU=y
> # CONFIG_PREEMPT_RCU is not set
> # CONFIG_RCU_TRACE is not set
> CONFIG_RCU_FANOUT=64
> # CONFIG_RCU_FANOUT_EXACT is not set
> # CONFIG_RCU_FAST_NO_HZ is not set
> # CONFIG_TREE_RCU_TRACE is not set
> CONFIG_PREEMPT_NOTIFIERS=y
> # CONFIG_PREEMPT_NONE is not set
> CONFIG_PREEMPT_VOLUNTARY=y
> # CONFIG_PREEMPT is not set
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> CONFIG_X86_MCE_AMD=y
> CONFIG_X86_MCE_THRESHOLD=y
> # CONFIG_X86_MCE_INJECT is not set
> CONFIG_EDAC_DECODE_MCE=y
> # CONFIG_EDAC_MCE_INJ is not set
> CONFIG_EDAC_MCE=y
> # CONFIG_SPARSE_RCU_POINTER is not set
> # CONFIG_RCU_TORTURE_TEST is not set
> CONFIG_RCU_CPU_STALL_DETECTOR=y
> CONFIG_RCU_CPU_STALL_TIMEOUT=60
> CONFIG_RCU_CPU_STALL_DETECTOR_RUNNABLE=y
> 
> Please let me know if there is anything I can do to help sort this out.
> 
> -- Jim
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/