| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 3 May 2011 19:12:21 +0530
From: Ashish Jangam <Ashish.Jangam@...tcummins.com>
To: Mark Brown <broonie@...nsource.wolfsonmicro.com>
CC: "lrg@...mlogic.co.uk" <lrg@...mlogic.co.uk>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
David Dajun Chen <Dajun.Chen@...semi.com>
Subject: [PATCHv1 -next] REGULATOR: Regulator module of DA9052 PMIC driver
Hi Mark,
Regulator Driver for Dialog Semiconductor DA9052 PMICs.
Changes made since last submission:
. separate ops for buck peri
Signed-off-by: David Dajun Chen <dchen@...semi.com>
---
diff -Naur linux-next-20110421.orig/drivers/regulator/da9052-regulator.c linux-next-20110421/drivers/regulator/da9052-regulator.c
--- linux-next-20110421.orig/drivers/regulator/da9052-regulator.c 1970-01-01 05:00:00.000000000 +0500
+++ linux-next-20110421/drivers/regulator/da9052-regulator.c 2011-05-03 17:18:49.000000000 +0500
@@ -0,0 +1,502 @@
+/*
+* da9052-regulator.c: Regulator driver for DA9052
+*
+* Copyright(c) 2011 Dialog Semiconductor Ltd.
+*
+*Author: David Dajun Chen <dchen@...semi.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/pdata.h>
+
+/* LDO and Buck index */
+#define DA9052_BUCK_CORE 0
+#define DA9052_BUCK_PRO 1
+#define DA9052_BUCK_MEM 2
+#define DA9052_BUCK_PERI 3
+
+#define DA9052_LDO2 4
+#define DA9052_LDO3 5
+
+/* Buck step size Macros */
+#define DA9052_BUCK_PERI_3uV_STEP 100000
+#define DA9052_BUCK_PERI_REG_MAP_UPTO_3uV 24
+#define DA9052_CONST_3uV 3000000
+
+#define DA9052_REGULATOR_INIT(max, min) \
+{\
+ .constraints = {\
+ .max_uV = (max) * 1000,\
+ .min_uV = (min) * 1000,\
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE\
+ |REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE,\
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,\
+ },\
+}
+
+struct regulator_init_data da9052_regulators_init[] = {
+ /* BUCKS */
+ DA9052_REGULATOR_INIT(2075, 500),
+ DA9052_REGULATOR_INIT(2075, 500),
+ DA9052_REGULATOR_INIT(2500, 925),
+ DA9052_REGULATOR_INIT(3600, 1800),
+ /* LDO */
+ DA9052_REGULATOR_INIT(1800, 600),
+ DA9052_REGULATOR_INIT(1800, 600),
+ DA9052_REGULATOR_INIT(3300, 1725),
+ DA9052_REGULATOR_INIT(3300, 1725),
+ DA9052_REGULATOR_INIT(3600, 1200),
+ DA9052_REGULATOR_INIT(3600, 1200),
+ DA9052_REGULATOR_INIT(3600, 1200),
+ DA9052_REGULATOR_INIT(3600, 1200),
+ DA9052_REGULATOR_INIT(3650, 1250),
+ DA9052_REGULATOR_INIT(3600, 1200),
+
+};
+
+struct da9052_regulator_info {
+ struct regulator_desc reg_desc;
+ int step_uV;
+ int max_uV;
+ int min_uV;
+ unsigned char volt_shift;
+ unsigned char enable_bit;
+ unsigned char supply_v_mask;
+
+};
+
+struct da9052_regulator {
+ struct da9052 *da9052;
+ struct regulator_dev *rdev;
+};
+
+static inline struct da9052 *to_da9052(struct regulator_dev *rdev)
+{
+ return rdev_get_dev(rdev)->parent->parent;
+}
+
+static int verify_range(struct regulator_dev *rdev, int min_uV, int max_uV)
+{
+ struct da9052_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (min_uV < info->min_uV || min_uV > info->max_uV)
+ return -EINVAL;
+ if (max_uV < info->min_uV || max_uV > info->max_uV)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int da9052_regulator_enable(struct regulator_dev *rdev)
+{
+ struct da9052_regulator_info *info = rdev_get_drvdata(rdev);
+ struct da9052 *da9052 = to_da9052(rdev);
+ int offset = rdev_get_id(rdev);
+ int ret;
+
+ ret = da9052_reg_update(da9052, DA9052_BUCKCORE_REG + offset,
+ 1 << info->enable_bit, 1 << info->enable_bit);
+ if (ret < 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int da9052_regulator_disable(struct regulator_dev *rdev)
+{
+ struct da9052_regulator_info *info = rdev_get_drvdata(rdev);
+ struct da9052 *da9052 = to_da9052(rdev);
+ int offset = rdev_get_id(rdev);
+ int ret;
+
+ ret = da9052_reg_update(da9052, DA9052_BUCKCORE_REG + offset,
+ 1 << info->enable_bit, 0);
+ if (ret < 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int da9052_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct da9052_regulator_info *info = rdev_get_drvdata(rdev);
+ struct da9052 *da9052 = to_da9052(rdev);
+ int offset = rdev_get_id(rdev);
+ int ret;
+
+ ret = da9052_reg_read(da9052, DA9052_BUCKCORE_REG + offset);
+
+ if (ret < 0)
+ return -EIO;
+
+ return ret & (1 << info->enable_bit);
+
+}
+
+static int da9052_list_buckperi_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ struct da9052_regulator_info *info = rdev_get_drvdata(rdev);
+ int volt_uV;
+
+ if (selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV) {
+ volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV) +
+ info->min_uV);
+ volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)
+ *(DA9052_BUCK_PERI_3uV_STEP);
+ } else {
+ volt_uV = (selector * info->step_uV) + info->min_uV;
+ }
+
+ if (volt_uV > info->max_uV)
+ return -EINVAL;
+
+ return volt_uV;
+}
+
+static int da9052_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ struct da9052_regulator_info *info = rdev_get_drvdata(rdev);
+ int volt_uV;
+
+ volt_uV = info->min_uV + info->step_uV * selector;
+
+ if (volt_uV > info->max_uV)
+ return -EINVAL;
+
+ return volt_uV;
+}
+
+static int da9052_set_buckperi_voltage(struct regulator_dev *rdev, int min_uV,
+ int max_uV, unsigned int *selector)
+{
+ struct da9052_regulator_info *info = rdev_get_drvdata(rdev);
+ struct da9052 *da9052 = to_da9052(rdev);
+ int offset = rdev_get_id(rdev);
+ int ret;
+
+ /* Verify voltage range */
+ if (verify_range(rdev, min_uV, max_uV))
+ return -EINVAL;
+
+ /* Determine the voltage selector */
+ if (min_uV >= DA9052_CONST_3uV)
+ *selector = DA9052_CONST_3uV + ((min_uV - DA9052_CONST_3uV) /
+ (DA9052_BUCK_PERI_3uV_STEP));
+ else
+ *selector = (min_uV - info->min_uV) / info->step_uV;
+
+ /* Validate the selector */
+ if (da9052_list_buckperi_voltage(rdev, *selector))
+ return -EINVAL;
+
+ ret = da9052_reg_update(da9052, DA9052_BUCKCORE_REG + offset,
+ (1 << info->volt_shift) - 1, *selector);
+ if (ret < 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int da9052_regulator_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV, unsigned int *selector)
+{
+ struct da9052_regulator_info *info = rdev_get_drvdata(rdev);
+ struct da9052 *da9052 = to_da9052(rdev);
+ int offset = rdev_get_id(rdev);
+ int ret;
+
+ /* Verify voltage range */
+ if (verify_range(rdev, min_uV, max_uV))
+ return -EINVAL;
+
+ /* Determine voltage selector */
+ *selector = (min_uV - info->min_uV) / info->step_uV;
+
+ /* Validate the selector */
+ if (da9052_list_voltage(rdev, *selector))
+ return -EINVAL;
+
+ ret = da9052_reg_update(da9052, DA9052_BUCKCORE_REG + offset,
+ (1 << info->volt_shift) - 1, *selector);
+ if (ret < 0)
+ return -EIO;
+
+ /* Enable regualtor bit */
+ if (info->supply_v_mask != 0) {
+ ret = da9052_reg_update(da9052, DA9052_SUPPLY_REG, 0,
+ info->supply_v_mask);
+ if (ret < 0)
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int da9052_get_buckperi_voltage(struct regulator_dev *rdev)
+{
+ struct da9052_regulator_info *info = rdev_get_drvdata(rdev);
+ struct da9052 *da9052 = to_da9052(rdev);
+ int offset = rdev_get_id(rdev);
+ int ret;
+ int regval;
+ int volt_uV;
+
+ ret = da9052_reg_read(da9052, DA9052_BUCKCORE_REG + offset);
+
+ if (ret < 0)
+ return -EIO;
+
+ regval = ret & ((1 << info->volt_shift) - 1);
+
+ /* Convert regsister value into micro volt */
+ volt_uV = da9052_list_buckperi_voltage(rdev, regval);
+
+ return volt_uV;
+}
+
+
+static int da9052_regulator_get_voltage(struct regulator_dev *rdev)
+{
+ struct da9052_regulator_info *info = rdev_get_drvdata(rdev);
+ struct da9052 *da9052 = to_da9052(rdev);
+ int offset = rdev_get_id(rdev);
+ int ret;
+ int regval;
+ int volt_uV;
+
+ ret = da9052_reg_read(da9052, DA9052_BUCKCORE_REG + offset);
+
+ if (ret < 0)
+ return -EIO;
+
+ regval = ret & ((1 << info->volt_shift) - 1);
+
+ /* Convert regsister value into micro volt */
+ volt_uV = da9052_list_voltage(rdev, regval);
+
+ return volt_uV;
+}
+
+
+static struct regulator_ops da9052_buckperi_ops = {
+ .is_enabled = da9052_regulator_is_enabled,
+ .enable = da9052_regulator_enable,
+ .disable = da9052_regulator_disable,
+ .get_voltage = da9052_get_buckperi_voltage,
+ .set_voltage = da9052_set_buckperi_voltage,
+ .list_voltage = da9052_list_buckperi_voltage,
+};
+
+
+static struct regulator_ops da9052_regulator_ops = {
+ .is_enabled = da9052_regulator_is_enabled,
+ .enable = da9052_regulator_enable,
+ .disable = da9052_regulator_disable,
+ .get_voltage = da9052_regulator_get_voltage,
+ .set_voltage = da9052_regulator_set_voltage,
+ .list_voltage = da9052_list_voltage,
+};
+
+#define DA9052_LDO(_id, step, max, min, sbits, ebits, mbits) \
+{\
+ .reg_desc = {\
+ .name = "LDO" #_id,\
+ .ops = &da9052_regulator_ops,\
+ .type = REGULATOR_VOLTAGE,\
+ .id = _id,\
+ .owner = THIS_MODULE,\
+ },\
+ .max_uV = (max) * 1000,\
+ .min_uV = (min) * 1000,\
+ .step_uV = (step) * 1000,\
+ .volt_shift = (sbits),\
+ .enable_bit = (ebits),\
+ .supply_v_mask = (mbits),\
+}
+
+#define DA9052_DCDC(_id, step, max, min, sbits, ebits, mbits) \
+{\
+ .reg_desc = {\
+ .name = "BUCK" #_id,\
+ .ops = &da9052_regulator_ops,\
+ .type = REGULATOR_VOLTAGE,\
+ .id = _id,\
+ .owner = THIS_MODULE,\
+ },\
+ .max_uV = (max) * 1000,\
+ .min_uV = (min) * 1000,\
+ .step_uV = (step) * 1000,\
+ .volt_shift = (sbits),\
+ .enable_bit = (ebits),\
+ .supply_v_mask = (mbits),\
+}
+
+#define DA9052_BUCKPERI(_id, step, max, min, sbits, ebits, mbits) \
+{\
+ .reg_desc = {\
+ .name = "BUCK" #_id,\
+ .ops = &da9052_buckperi_ops,\
+ .type = REGULATOR_VOLTAGE,\
+ .id = _id,\
+ .owner = THIS_MODULE,\
+ },\
+ .max_uV = (max) * 1000,\
+ .min_uV = (min) * 1000,\
+ .step_uV = (step) * 1000,\
+ .volt_shift = (sbits),\
+ .enable_bit = (ebits),\
+ .supply_v_mask = (mbits),\
+}
+
+struct da9052_regulator_info da9052_regulator_info[] = {
+ /* Buck1 - 4*/
+ DA9052_DCDC(0, 25, 2075, 500, 6, 6, DA9052_SUPPLY_VBCOREGO),
+ DA9052_DCDC(1, 25, 2075, 500, 6, 6, DA9052_SUPPLY_VBPROGO),
+ DA9052_DCDC(2, 25, 2500, 925, 6, 6, DA9052_SUPPLY_VBMEMGO),
+ DA9052_BUCKPERI(3, 50, 3600, 1800, 5, 6, 0),
+ /* LD01 - LDO10*/
+ DA9052_LDO(4, 50, 1800, 600, 5, 6, 0),
+ DA9052_LDO(5, 25, 1800, 600, 6, 6, DA9052_SUPPLY_VLDO2GO),
+ DA9052_LDO(6, 25, 3300, 1725, 6, 6, DA9052_SUPPLY_VLDO3GO),
+ DA9052_LDO(7, 25, 3300, 1725, 6, 6, 0),
+ DA9052_LDO(8, 50, 3600, 1200, 6, 6, 0),
+ DA9052_LDO(9, 50, 3600, 1200, 6, 6, 0),
+ DA9052_LDO(10, 50, 3600, 1200, 6, 6, 0),
+ DA9052_LDO(11, 50, 3600, 1200, 6, 6, 0),
+ DA9052_LDO(12, 50, 3650, 1250, 6, 6, 0),
+ DA9052_LDO(13, 50, 3600, 1200, 6, 6, 0),
+};
+
+static int da9052_remove_subdev(struct device *dev, void *unused)
+{
+ platform_device_unregister(to_platform_device(dev));
+ return 0;
+}
+
+void da9052_add_regulator_devices(struct da9052 *da9052,
+ struct da9052_pdata *pdata)
+{
+ struct platform_device *pdev;
+ int i;
+ int ret;
+
+ for (i = 0; i < pdata->num_regulators; i++) {
+
+ pdev = platform_device_alloc("da9052-regulator", i);
+ if (!pdev) {
+ ret = -ENOMEM;
+ goto failed;
+ }
+ pdev->id = i;
+ pdev->dev.parent = da9052->dev;
+ ret = platform_device_add(pdev);
+ if (ret) {
+ platform_device_put(pdev);
+ goto failed;
+ }
+ }
+ return;
+
+failed:
+ device_for_each_child(da9052->dev, NULL, da9052_remove_subdev);
+ return;
+}
+EXPORT_SYMBOL(da9052_add_regulator_devices);
+
+
+static inline struct da9052_regulator_info *find_regulator_info(int id)
+{
+ struct da9052_regulator_info *info;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(da9052_regulator_info); i++) {
+ info = &da9052_regulator_info[i];
+ if (info->reg_desc.id == id)
+ return info;
+ }
+ return NULL;
+}
+
+static int __devinit da9052_regulator_probe(struct platform_device *pdev)
+{
+ struct da9052_regulator_info *info;
+ struct da9052_regulator *regulator;
+ struct da9052 *da9052 = dev_get_drvdata(pdev->dev.parent);
+
+ regulator = kzalloc(sizeof(struct da9052_regulator), GFP_KERNEL);
+ if (!regulator)
+ return -ENOMEM;
+
+ regulator->da9052 = da9052;
+
+ info = find_regulator_info(pdev->id);
+ if (info == NULL) {
+ dev_err(&pdev->dev, "invalid regulator ID specified\n");
+ return -EINVAL;
+ }
+
+ regulator->rdev = regulator_register(&info->reg_desc, &pdev->dev,
+ &da9052_regulators_init[pdev->id], info);
+ if (IS_ERR(regulator->rdev)) {
+ dev_err(&pdev->dev, "failed to register regulator %s\n",
+ info->reg_desc.name);
+ return PTR_ERR(regulator->rdev);
+ }
+
+ platform_set_drvdata(pdev, regulator);
+
+ return 0;
+
+}
+
+static int __devexit da9052_regulator_remove(struct platform_device *pdev)
+{
+ struct da9052_regulator *regulator = platform_get_drvdata(pdev);
+
+ regulator_unregister(regulator->rdev);
+
+ kfree(regulator);
+ return 0;
+}
+
+static struct platform_driver da9052_regulator_driver = {
+ .driver = {
+ .name = "da9052-regulator",
+ .owner = THIS_MODULE,
+ },
+ .probe = da9052_regulator_probe,
+ .remove = __devexit_p(da9052_regulator_remove),
+};
+
+static int __init da9052_regulator_init(void)
+{
+ return platform_driver_register(&da9052_regulator_driver);
+}
+subsys_initcall(da9052_regulator_init);
+
+static void __exit da9052_regulator_exit(void)
+{
+ platform_driver_unregister(&da9052_regulator_driver);
+}
+module_exit(da9052_regulator_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@...semi.com>");
+MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9052 PMIC");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:da9052-regulator");
diff -Naur linux-next-20110421.orig/drivers/regulator/Kconfig linux-next-20110421/drivers/regulator/Kconfig
--- linux-next-20110421.orig/drivers/regulator/Kconfig 2011-04-26 09:31:41.000000000 +0500
+++ linux-next-20110421/drivers/regulator/Kconfig 2011-05-03 17:22:24.000000000 +0500
@@ -167,6 +167,13 @@
Say y here to support the BUCKs and LDOs regulators found on
Dialog Semiconductor DA9030/DA9034 PMIC.
+config REGULATOR_DA9052
+ tristate "Dialog DA9052 regulators"
+ depends on PMIC_DA9052
+ help
+ Say y here to support the BUCKs and LDOs regulators found on
+ Dialog Semiconductor DA9052 PMIC.
+
config REGULATOR_PCF50633
tristate "PCF50633 regulator driver"
depends on MFD_PCF50633
diff -Naur linux-next-20110421.orig/drivers/regulator/Makefile linux-next-20110421/drivers/regulator/Makefile
--- linux-next-20110421.orig/drivers/regulator/Makefile 2011-04-26 09:31:41.000000000 +0500
+++ linux-next-20110421/drivers/regulator/Makefile 2011-05-03 17:22:22.000000000 +0500
@@ -28,6 +28,7 @@
obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
+obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
Regards,
Ashish
Powered by blists - more mailing lists