6>xor: using function: pIII_sse (7160.000 MB/sec) print_constraints: dummy: NET: Registered protocol family 16 EISA bus registered node 0 link 0: io port [1000, ffffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, fe0bffff] TOM2: 0000000240000000 aka 9216M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] ACPI: bus type pci registered dca service started, version 1.12.1 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 PCI: Using configuration type 1 for base access bio: create slab at 0 raid6: int32x1 621 MB/s raid6: int32x2 1089 MB/s raid6: int32x4 710 MB/s raid6: int32x8 601 MB/s raid6: mmxx1 1941 MB/s raid6: mmxx2 3351 MB/s raid6: sse1x1 1894 MB/s raid6: sse1x2 2902 MB/s raid6: sse2x1 3332 MB/s raid6: sse2x2 4250 MB/s raid6: using algorithm sse2x2 (4250 MB/s) ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: No dock devices found. HEST: Table not found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xff77ffff] (ignored) pci 0000:00:00.0: [10de:03ea] type 0 class 0x000500 pci 0000:00:01.0: [10de:03e0] type 0 class 0x000601 pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05 pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc3f] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500 pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03 pci 0000:00:02.0: reg 10: [mem 0xdfdff000-0xdfdfffff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03 pci 0000:00:02.1: reg 10: [mem 0xdfdfec00-0xdfdfecff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604 pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403 pci 0000:00:05.0: reg 10: [mem 0xdfdf8000-0xdfdfbfff] pci 0000:00:05.0: PME# supported from D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101 pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101 pci 0000:00:08.0: reg 10: [io 0xd480-0xd487] pci 0000:00:08.0: reg 14: [io 0xd400-0xd403] pci 0000:00:08.0: reg 18: [io 0xd080-0xd087] pci 0000:00:08.0: reg 1c: [io 0xd000-0xd003] pci 0000:00:08.0: reg 20: [io 0xcc00-0xcc0f] pci 0000:00:08.0: reg 24: [mem 0xdfdfd000-0xdfdfdfff] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604 pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604 pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: [10de:03d1] type 0 class 0x000300 pci 0000:00:0d.0: reg 10: [mem 0xde000000-0xdeffffff] pci 0000:00:0d.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:0d.0: reg 1c: [mem 0xdd000000-0xddffffff 64bit] pci 0000:00:0d.0: reg 30: [mem 0xdfdc0000-0xdfddffff pref] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 PCI: peer root bus 00 res updated from pci conf pci 0000:01:07.0: [10ec:8139] type 0 class 0x000200 pci 0000:01:07.0: reg 10: [io 0xe800-0xe8ff] pci 0000:01:07.0: reg 14: [mem 0xdfeffc00-0xdfeffcff] pci 0000:01:07.0: supports D1 D2 pci 0000:01:07.0: PME# supported from D1 D2 D3hot pci 0000:01:07.0: PME# disabled pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:04.0: bridge window [io 0xe000-0xefff] pci 0000:00:04.0: bridge window [mem 0xdfe00000-0xdfefffff] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:04.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:09.0: PCI bridge to [bus 02-02] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:0b.0: PCI bridge to [bus 03-03] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:04:00.0: [1969:1048] type 0 class 0x000200 pci 0000:04:00.0: reg 10: [mem 0xdffc0000-0xdfffffff 64bit] pci 0000:04:00.0: reg 30: [mem 0xdffa0000-0xdffbffff pref] pci 0000:04:00.0: PME# supported from D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0c.0: PCI bridge to [bus 04-04] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0c.0: bridge window [mem 0xdff00000-0xdfffffff] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) Unable to assume _OSC PCIe control. Disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 *11 14) ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 *11 14) ACPI: PCI Interrupt Link [LNEB] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14) ACPI: PCI Interrupt Link [LUB2] (IRQs 7 *10 11 14) ACPI: PCI Interrupt Link [LMAC] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 *11 14) ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 *11 14) ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14) ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LSA0] (IRQs *15) ACPI: PCI Interrupt Link [LSA1] (IRQs 5) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled. vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb wmi: Mapper loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000affc0000 - 00000000afffffff Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. NET: Registered protocol family 8 NET: Registered protocol family 20 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switching to clocksource hpet FS-Cache: Loaded CacheFiles: Loaded pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000d0000-0x000dffff window] pnp 00:00: [mem 0xb0000000-0xff77ffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0070-0x0071] pnp 00:02: [irq 8] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: [io 0x0061] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:04: [io 0x00f0-0x00ff] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x03f0-0x03f5] pnp 00:05: [io 0x03f7] pnp 00:05: [irq 6] pnp 00:05: [dma 2] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:06: [io 0x0378-0x037f] pnp 00:06: [io 0x0778-0x077f] pnp 00:06: [irq 7] pnp 00:06: [dma 3] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:07: [mem 0x000d0000-0x000d3fff window] pnp 00:07: [mem 0x000d4000-0x000d7fff window] pnp 00:07: [mem 0x000de000-0x000dffff window] pnp 00:07: [io 0x0010-0x001f] pnp 00:07: [io 0x0022-0x003f] pnp 00:07: [io 0x0044-0x004d] pnp 00:07: [io 0x0050-0x005f] pnp 00:07: [io 0x0062-0x0063] pnp 00:07: [io 0x0065-0x006f] pnp 00:07: [io 0x0072-0x007f] pnp 00:07: [io 0x0080] pnp 00:07: [io 0x0084-0x0086] pnp 00:07: [io 0x0088] pnp 00:07: [io 0x008c-0x008e] pnp 00:07: [io 0x0090-0x009f] pnp 00:07: [io 0x00a2-0x00bf] pnp 00:07: [io 0x00e0-0x00ef] pnp 00:07: [io 0x04d0-0x04d1] pnp 00:07: [io 0x0800-0x080f] pnp 00:07: [io 0x0500-0x057f] pnp 00:07: [io 0x0580-0x05ff] pnp 00:07: [io 0x0800-0x087f] pnp 00:07: [io 0x0880-0x08ff] pnp 00:07: [io 0x0d00-0x0d7f] pnp 00:07: [io 0x0d80-0x0dff] pnp 00:07: [io 0x2000-0x207f] pnp 00:07: [io 0x2080-0x20ff] pnp 00:07: [mem 0xfefe0000-0xfefe01ff] pnp 00:07: [mem 0xfefe1000-0xfefe1fff] pnp 00:07: [mem 0xfee01000-0xfeefffff] pnp 00:07: [mem 0xffb80000-0xffffffff] pnp 00:07: [mem 0xff300000-0xff3fffff] system 00:07: [io 0x04d0-0x04d1] has been reserved system 00:07: [io 0x0800-0x080f] has been reserved system 00:07: [io 0x0500-0x057f] has been reserved system 00:07: [io 0x0580-0x05ff] has been reserved system 00:07: [io 0x0800-0x087f] could not be reserved system 00:07: [io 0x0880-0x08ff] has been reserved system 00:07: [io 0x0d00-0x0d7f] has been reserved system 00:07: [io 0x0d80-0x0dff] has been reserved system 00:07: [io 0x2000-0x207f] has been reserved system 00:07: [io 0x2080-0x20ff] has been reserved system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved system 00:07: [mem 0x000de000-0x000dffff window] has been reserved system 00:07: [mem 0xfefe0000-0xfefe01ff] has been reserved system 00:07: [mem 0xfefe1000-0xfefe1fff] has been reserved system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved system 00:07: [mem 0xffb80000-0xffffffff] has been reserved system 00:07: [mem 0xff300000-0xff3fffff] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: [mem 0xfed00000-0xfed00fff] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:09: [mem 0xfec00000-0xfec00fff] pnp 00:09: [mem 0xfee00000-0xfee00fff] pnp 00:09: [mem 0xb0000000-0xbfffffff] system 00:09: [mem 0xfec00000-0xfec00fff] has been reserved system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved system 00:09: [mem 0xb0000000-0xbfffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [io 0x0060] pnp 00:0a: [io 0x0064] pnp 00:0a: [irq 1] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0b: [irq 12] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) pnp 00:0c: [io 0x0000-0xffffffff disabled] pnp 00:0c: [io 0x0230-0x023f] pnp 00:0c: [io 0x0290-0x029f] pnp 00:0c: [io 0x0a00-0x0a0f] pnp 00:0c: [io 0x0a10-0x0a1f] system 00:0c: [io 0x0230-0x023f] has been reserved system 00:0c: [io 0x0290-0x029f] has been reserved system 00:0c: [io 0x0a00-0x0a0f] has been reserved system 00:0c: [io 0x0a10-0x0a1f] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: [io 0x03f8-0x03ff] pnp 00:0d: [irq 4] pnp 00:0d: [dma 0 disabled] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0e: [mem 0xe0000000-0xefffffff] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0f: [mem 0x00000000-0x0009ffff] pnp 00:0f: [mem 0x000c0000-0x000cffff] pnp 00:0f: [mem 0x000e0000-0x000fffff] pnp 00:0f: [mem 0x00100000-0xafffffff] pnp 00:0f: [mem 0xff780000-0xffffffff] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0f: [mem 0x00100000-0xafffffff] could not be reserved system 00:0f: [mem 0xff780000-0xffffffff] could not be reserved system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP mdacon: MDA with 8K of memory detected. Console: switching consoles 13-16 to MDA-2 pci 0000:00:04.0: PCI bridge to [bus 01-01] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] pci 0000:00:04.0: bridge window [mem 0xdfe00000-0xdfefffff] pci 0000:00:04.0: bridge window [mem pref disabled] pci 0000:00:09.0: PCI bridge to [bus 02-02] pci 0000:00:09.0: bridge window [io disabled] pci 0000:00:09.0: bridge window [mem disabled] pci 0000:00:09.0: bridge window [mem pref disabled] pci 0000:00:0b.0: PCI bridge to [bus 03-03] pci 0000:00:0b.0: bridge window [io disabled] pci 0000:00:0b.0: bridge window [mem disabled] pci 0000:00:0b.0: bridge window [mem pref disabled] pci 0000:00:0c.0: PCI bridge to [bus 04-04] pci 0000:00:0c.0: bridge window [io disabled] pci 0000:00:0c.0: bridge window [mem 0xdff00000-0xdfffffff] pci 0000:00:0c.0: bridge window [mem pref disabled] pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xffffffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] pci_bus 0000:01: resource 5 [mem 0xc0000000-0xffffffff] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 1 [mem 0xdff00000-0xdfffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Boot video device PCI: CLS 64 bytes, default 64 Machine check injector initialized cpufreq-nforce2: No nForce2 chipset. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. microcode: CPU0: family 15 not supported The force parameter has not been set to 1 so the Iris poweroff handler will not be installed. scx200: NatSemi SCx200 Driver audit: initializing netlink socket (disabled) type=2000 audit(1304369307.828:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) DLM (built May 2 2011 19:12:11) installed squashfs: version 4.0 (2009/01/31) Phillip Lougher Registering the id_resolver key type FS-Cache: Netfs 'nfs' registered for caching nfs4filelayout_init: NFSv4 File Layout Driver Registering... Installing knfsd (copyright (C) 1996 okir@monad.swb.de). FS-Cache: Netfs 'cifs' registered for caching NTFS driver 2.1.30 [Flags: R/W]. EFS: 1.0a - http://aeschi.ch.eu.org/efs/ ROMFS MTD (C) 2007 Red Hat, Inc. QNX4 filesystem 0.2.3 registered. fuse init (API version 7.16) JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem NILFS version 2 loaded BeFS version: 0.9.3 OCFS2 1.5.0 ocfs2: Registered cluster interface o2cb ocfs2: Registered cluster interface user OCFS2 DLMFS 1.5.0 OCFS2 User DLM kernel interface loaded OCFS2 Node Manager 1.5.0 OCFS2 DLM 1.5.0 Btrfs loaded GFS2 (built May 2 2011 19:13:29) installed ceph: loaded (mds proto 32) msgmni has been set to 1683 async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:09.0: setting latency timer to 64 pcieport 0000:00:0b.0: setting latency timer to 64 pcieport 0000:00:0c.0: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8 ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 cpcihp_generic: not configured, disabling. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed Console: switching consoles 13-16 to MDA-2 ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered nvidiafb 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 11 (level, low) -> IRQ 11 nvidiafb: Device ID: 10de03d1 nvidiafb: CRTC0 analog found nvidiafb: CRTC1 analog not found i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. i2c i2c-0: unable to read EDID block. nvidiafb: EDID found from BUS2 nvidiafb: CRTC 0 appears to have a CRT attached nvidiafb: Using CRT on CRTC 0 nvidiafb: MTRR set to ON fbcon: NV3d (fb0) is primary device Console: switching to colour frame buffer device 210x65 nvidiafb: PCI nVidia NV3d framebuffer (64MB @ 0xC0000000) VIA Graphics Integration Chipset framebuffer 2.4 initializing vmlfb: initializing Could not find Carillo Ranch MCH device. no IO addresses supplied hgafb: HGA card not detected. hgafb: probe of hgafb.0 failed with error -22 uvesafb: failed to execute /sbin/v86d uvesafb: make sure that the v86d helper is installed and executable uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) uvesafb: vbe_init() failed with -22 uvesafb: probe of uvesafb.0 failed with error -22 vesafb: cannot reserve video memory at 0xc0000000 vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:d2a0 vesafb: pmi: set display start = c00cd2d6, set palette = c00cd340 vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 vesafb: framebuffer at 0xc0000000, mapped to 0xfd680000, using 3072k, total 262144k fb1: VESA VGA frame buffer device vga16fb: initializing vga16fb: mapped to 0xc00a0000 checking generic (c0000000 10000000) vs hw (a0000 10000) fb2: VGA16 VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle ERST: Table is not found! isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A lp: driver loaded but no devices found Non-volatile memory driver v1.3 toshiba: not a supported Toshiba laptop Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. IT8712 SuperIO detected. parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). lp0: console ready FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.26) MM: desc_per_page = 128 nbd: registered device at major 43 usbcore: registered new interface driver ub drbd: initialized. Version: 8.3.10 (api:88/proto:86-96) drbd: built-in drbd: registered as block device major 147 drbd: minor_table @ 0xf55a5180 rbd: loaded rbd (rados block device) ibmasm: IBM ASM Service Processor Driver version 1.0 loaded Phantom Linux Driver, version n0.9.8, init OK i2c-core: driver [isl29003] using legacy suspend method i2c-core: driver [isl29003] using legacy resume method Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti c2port c2port0: C2 port uc added c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) Driver for timberdale has been successfully registered. Loading iSCSI transport class v2.0-870. rdac: device handler registered hp_sw: device handler registered emc: device handler registered alua: device handler registered fnic: Cisco FCoE HBA Driver, ver 1.5.0.1 bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.1 (Mar 17, 2011) iscsi: registered transport (tcp) Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver 1.1-7[28000]-ms aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded scsi: Detection failed (no card) NCR53c406a: no available ports found sym53c416.c: Version 1.0.0-ac qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options QLogic Fibre Channel HBA Driver: 8.03.07.00 iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver Emulex LightPulse Fibre Channel SCSI driver 8.3.22 Copyright(c) 2004-2009 Emulex. All rights reserved. Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.3 Failed initialization of WD-7000 SCSI card! DC390: clustering now enabled by default. If you get problems load with "disable_clustering=1" and report to maintainers megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.05.34-rc1 Thu. Feb. 24 17:00:00 PDT 2011 mpt2sas version 08.100.00.00 loaded GDT-HA: Storage RAID Controller Driver. Version: 3.05 3ware Storage Controller device driver for Linux v1.26.02.003. 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. ppa: Version 2.07 (for Linux 2.4.x) imm: Version 2.05 (for Linux 2.4.0) nsp32: loading... ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010) RocketRAID 3xxx/4xxx Controller driver v1.6 (090910) stex: Promise SuperTrak EX Driver version: 4.6.0000.4 libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) iscsi: registered transport (cxgb3i) Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010) iscsi: registered transport (cxgb4i) Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Dec 31, 2010) iscsi: registered transport (bnx2i) iscsi: registered transport (be2iscsi) VMware PVSCSI driver - version 1.0.1.0-k st: Version 20101219, fixed bufsize 32768, s/g segs 256 osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ SCSI Media Changer driver v0.25 osd: LOADED open-osd 0.2.0 sata_nv 0000:00:08.0: version 3.5 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15 PCI: setting IRQ 15 as level-triggered sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15 sata_nv 0000:00:08.0: setting latency timer to 64 scsi2 : sata_nv scsi3 : sata_nv ata1: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 15 ata2: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 15 pata_amd 0000:00:06.0: version 0.4.1 pata_amd 0000:00:06.0: setting latency timer to 64 scsi4 : pata_amd scsi5 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 Fixed MDIO Bus: probed Atheros(R) L2 Ethernet Driver - version 2.2.3 Copyright (c) 2007 Atheros Corporation. NET3 PLIP version 2.4-parport gniibe@mri.co.jp plip0: Parallel port at 0x378, using IRQ 7. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.13 (Jan 31, 2011) D-Link DE-620 pocket adapter io 0x378, which is busy. PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. DE600: port 0x378 busy atp.c:v1.09=ac 2002/10/01 Donald Becker I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.18 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.18 Fusion MPT FC Host driver 3.04.18 Fusion MPT SAS Host driver 3.04.18 Fusion MPT misc device (ioctl) driver 3.04.18 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) Fusion MPT LAN driver 3.04.18 Intel ISA PCIC probe: not found. Databook TCIC-2 PCMCIA probe: not found. aoe: AoE v47 initialised. paride: aten registered as protocol 0 paride: bpck registered as protocol 1 paride: comm registered as protocol 2 paride: dstr registered as protocol 3 paride: k951 registered as protocol 4 paride: k971 registered as protocol 5 paride: epat registered as protocol 6 paride: epia registered as protocol 7 paride: frpw registered as protocol 8 paride: friq registered as protocol 9 paride: fit2 registered as protocol 10 paride: fit3 registered as protocol 11 paride: on20 registered as protocol 12 paride: on26 registered as protocol 13 paride: ktti registered as protocol 14 bpck6: BACKPACK Protocol Driver V2.0.2 bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA paride: bpck6 registered as protocol 15 pd: pd version 1.05, major 45, cluster 64, nice 0 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: SAMSUNG HD203WI, 1AN10002, max UDMA/133 ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: Attached scsi generic sg0 type 0 sda: sda1 sda2 sda3 sda4 pda: Autoprobe failed pd: no valid drive found pcd: pcd version 1.07, major 46, nice 0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H66N, CB00, max UDMA/100 sd 2:0:0:0: [sda] Attached SCSI disk ata2.00: configured for UDMA/100 scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H66N CB00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 pcd0: Autoprobe failed pcd: No CD-ROM drive found pf: pf version 1.04, major 47, cluster 64, nice 0 pf: No ATAPI disk detected pt: pt version 1.04, major 96 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 ata4: port disabled. ignoring. pt0: Autoprobe failed pt: No ATAPI tape drive detected pg: pg version 1.02, major 97 pga: Autoprobe failed pg: No ATAPI device detected usbcore: registered new interface driver hwa-rc ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 10, io mem 0xdfdfec00 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.39-rc5-git4-i486-1sys ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 driver isp1362-hcd, 2005-04-04 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 11, io mem 0xdfdff000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.39-rc5-git4-i486-1sys ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver sl811: driver sl811-hcd, 19 May 2005 r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 usbcore: registered new interface driver hwa-hc usbcore: registered new interface driver wusb-cbaf usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usblp usbcore: registered new interface driver cdc_wdm usbcore: registered new interface driver usbtmc usbcore: registered new interface driver uas Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-cypress usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums_eneub6250 usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-onetouch usbcore: registered new interface driver ums-realtek usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 parport0: cannot grant exclusive access for device parkbd mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver appletouch usbcore: registered new interface driver bcm5974 inport.c: Didn't find InPort mouse at 0x23c logibm.c: Didn't find Logitech busmouse at 0x23c usbcore: registered new interface driver usb_acecad acecad: v3.2:USB Acecad Flair tablet driver usbcore: registered new interface driver aiptek aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen usbcore: registered new interface driver gtco GTCO usb driver version: 2.00.0006 usbcore: registered new interface driver hanwang usbcore: registered new interface driver kbtab kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver usbcore: registered new interface driver wacom wacom: v1.52:USB Wacom tablet driver mk712: device not present usbcore: registered new interface driver usbtouchscreen apanel: Fujitsu BIOS signature 'FJKEYINF' not found... usbcore: registered new interface driver ati_remote ati_remote: 2.2.1:ATI/X10 RF USB Remote Control usbcore: registered new interface driver ati_remote2 ati_remote2: ATI/Philips USB RF remote driver 0.3 cm109: Keymap for Komunikate KIP1000 phone loaded usbcore: registered new interface driver cm109 cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 usbcore: registered new interface driver keyspan_remote input: PC Speaker as /devices/platform/pcspkr/input/input3 usbcore: registered new interface driver powermate wistron_btns: System unknown usbcore: registered new interface driver yealink yealink: yld-20051230:Yealink phone driver i2c /dev entries driver Linux media interface: v0.10 lirc_dev: IR Remote Control driver registered, major 241 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR LIRC bridge handler initialized Linux video capture interface: v2.00 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.3.0 loaded device-mapper: multipath round-robin: version 1.0.0 loaded EDAC MC: Ver: 2.1.0 May 2 2011 EISA: Probing bus 0 at eisa.0 EISA: Cannot allocate resource for mainboard Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 2 Cannot allocate resource for EISA slot 3 Cannot allocate resource for EISA slot 4 Cannot allocate resource for EISA slot 5 Cannot allocate resource for EISA slot 6 Cannot allocate resource for EISA slot 7 Cannot allocate resource for EISA slot 8 EISA: Detected 0 cards. cpuidle: using governor ladder ioatdma: Intel(R) QuickData Technology Driver 4.00 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman wbsd: Winbond W83L51xD SD/MMC card interface driver wbsd: Copyright(c) Pierre Ossman via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc. usbcore: registered new interface driver ushc No iBFT detected. usbcore: registered new interface driver usbhid usbhid: USB HID core driver XGIfb: Options (null) asus_wmi: Asus Management GUID not found asus_wmi: Management GUID not found asus_wmi: Management GUID not found msi_laptop: driver 0.5 successfully loaded. compal-laptop: Motherboard not recognized (You could try the module's force-parameter) dell-wmi: No known WMI GUID found dell_wmi_aio: No known WMI GUID found acer_wmi: Acer Laptop ACPI-WMI Extras acer_wmi: No or unsupported WMI interface, unable to load acerhdf: Acer Aspire One Fan driver, v.0.5.24 acerhdf: unknown (unsupported) BIOS version System manufacturer/System Product Name/0413 , please report, aborting! hp_accel: driver loaded hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! fujitsu-laptop: driver 0.6.0 successfully loaded. This machine doesn't have MSI-hotkeys through WMI Topstar Laptop ACPI extras driver loaded oprofile: using NMI timer interrupt. IPv4 over IPv4 tunneling driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 NET: Registered protocol family 17 NET: Registered protocol family 33 lec:lane_module_init: lec.c: May 2 2011 20:18:19 initialized mpoa:atm_mpoa_init: mpc.c: May 2 2011 20:18:17 initialized sctp: Hash tables configured (established 65536 bind 65536) lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' lib80211_crypt: registered algorithm 'WEP' lib80211_crypt: registered algorithm 'CCMP' lib80211_crypt: registered algorithm 'TKIP' Registering the dns_resolver key type libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (1 cpu cores) (version 2.20.00) [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup Using IPI No-Shortcut mode psmouse serio1: ID: 10 00 64 usb 2-3: new low speed USB device number 2 using ohci_hcd usb 2-3: device descriptor read/64, error -62 usb 2-3: device descriptor read/64, error -62 input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 kAFS: Red Hat AFS client v0.1 registering. FS-Cache: Netfs 'afs' registered for caching raid6test: testing the 4-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q) OK usb 2-3: new low speed USB device number 3 using ohci_hcd raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q) OK raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q) OK raid6test: testing the 5-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P) OK raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P) OK raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q) OK raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P) OK raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q) OK raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q) OK raid6test: testing the 11-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK raid6test: test_disks(0, 9): faila= 0(D) failb= 9(P) OK raid6test: test_disks(0, 10): faila= 0(D) failb= 10(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK raid6test: test_disks(1, 9): faila= 1(D) failb= 9(P) OK raid6test: test_disks(1, 10): faila= 1(D) failb= 10(Q) OK raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK raid6test: test_disks(2, 9): faila= 2(D) failb= 9(P) OK raid6test: test_disks(2, 10): faila= 2(D) failb= 10(Q) OK raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK raid6test: test_disks(3, 9): faila= 3(D) failb= 9(P) OK raid6test: test_disks(3, 10): faila= 3(D) failb= 10(Q) OK raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK raid6test: test_disks(4, 9): faila= 4(D) failb= 9(P) OK raid6test: test_disks(4, 10): faila= 4(D) failb= 10(Q) OK raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK raid6test: test_disks(5, 9): faila= 5(D) failb= 9(P) OK raid6test: test_disks(5, 10): faila= 5(D) failb= 10(Q) OK raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK raid6test: test_disks(6, 9): faila= 6(D) failb= 9(P) OK raid6test: test_disks(6, 10): faila= 6(D) failb= 10(Q) OK raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK raid6test: test_disks(7, 9): faila= 7(D) failb= 9(P) OK raid6test: test_disks(7, 10): faila= 7(D) failb= 10(Q) OK raid6test: test_disks(8, 9): faila= 8(D) failb= 9(P) OK raid6test: test_disks(8, 10): faila= 8(D) failb= 10(Q) OK raid6test: test_disks(9, 10): faila= 9(P) failb= 10(Q) OK raid6test: testing the 12-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK raid6test: test_disks(0, 10): faila= 0(D) failb= 10(P) OK raid6test: test_disks(0, 11): faila= 0(D) failb= 11(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK raid6test: test_disks(1, 10): faila= 1(D) failb= 10(P) OK raid6test: test_disks(1, 11): faila= 1(D) failb= 11(Q) OK raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK raid6test: test_disks(2, 10): faila= 2(D) failb= 10(P) OK raid6test: test_disks(2, 11): faila= 2(D) failb= 11(Q) OK raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK raid6test: test_disks(3, 10): faila= 3(D) failb= 10(P) OK raid6test: test_disks(3, 11): faila= 3(D) failb= 11(Q) OK raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK raid6test: test_disks(4, 10): faila= 4(D) failb= 10(P) OK raid6test: test_disks(4, 11): faila= 4(D) failb= 11(Q) OK raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK raid6test: test_disks(5, 10): faila= 5(D) failb= 10(P) OK raid6test: test_disks(5, 11): faila= 5(D) failb= 11(Q) OK raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK raid6test: test_disks(6, 10): faila= 6(D) failb= 10(P) OK raid6test: test_disks(6, 11): faila= 6(D) failb= 11(Q) OK raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK raid6test: test_disks(7, 10): faila= 7(D) failb= 10(P) OK raid6test: test_disks(7, 11): faila= 7(D) failb= 11(Q) OK raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK raid6test: test_disks(8, 10): faila= 8(D) failb= 10(P) OK raid6test: test_disks(8, 11): faila= 8(D) failb= 11(Q) OK raid6test: test_disks(9, 10): faila= 9(D) failb= 10(P) OK raid6test: test_disks(9, 11): faila= 9(D) failb= 11(Q) OK raid6test: test_disks(10, 11): faila= 10(P) failb= 11(Q) OK raid6test: testing the 16-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D) OK raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D) OK raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D) OK raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D) OK raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P) OK raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D) OK raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D) OK raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D) OK raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D) OK raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P) OK raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q) OK raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D) OK raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D) OK raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D) OK raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D) OK raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P) OK raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q) OK raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK usb 2-3: device descriptor read/64, error -62 raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D) OK raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D) OK raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D) OK raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D) OK raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P) OK raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q) OK raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D) OK raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D) OK raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D) OK raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D) OK raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P) OK raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q) OK raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D) OK raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D) OK raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D) OK raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D) OK raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P) OK raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q) OK raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D) OK raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D) OK raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D) OK raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D) OK raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P) OK raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q) OK raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D) OK raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D) OK raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D) OK raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D) OK raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P) OK raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q) OK raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D) OK raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D) OK raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D) OK raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D) OK raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P) OK raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q) OK raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D) OK raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D) OK raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D) OK raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D) OK raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P) OK raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q) OK raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D) OK raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D) OK raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D) OK raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P) OK raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q) OK raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D) OK raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D) OK raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P) OK raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q) OK raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D) OK raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P) OK raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q) OK raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P) OK raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q) OK raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q) OK raid6test: raid6test: complete (257 tests, 0 failures) hd: no drives specified - use hd=cyl,head,sectors on kernel command line BIOS EDD facility v0.16 2004-Jun-25, 1 devices found md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:1. devtmpfs: mounted Freeing unused kernel memory: 976k freed usb 2-3: device descriptor read/64, error -62 usb 2-3: new low speed USB device number 4 using ohci_hcd usb 2-3: device not accepting address 4, error -62 usb 2-3: new low speed USB device number 5 using ohci_hcd usb 2-3: device not accepting address 5, error -62 hub 2-0:1.0: unable to enumerate USB device on port 3 udevd (2797): /proc/2797/oom_adj is deprecated, please use /proc/2797/oom_score_adj instead. i2c i2c-3: nForce2 SMBus adapter at 0x600 i2c i2c-4: nForce2 SMBus adapter at 0x700 ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 11 atl1 0000:04:00.0: PCI INT A -> Link[LNEA] -> GSI 11 (level, low) -> IRQ 11 atl1 0000:04:00.0: setting latency timer to 64 atl1 0000:04:00.0: version 2.1.3 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 8139too: 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 8139too 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 8139too 0000:01:07.0: eth1: RealTek RTL8139 at 0xe800, 00:08:a1:6d:38:47, IRQ 11 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11 HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 11 (level, low) -> IRQ 11 hda_intel: Disable MSI for Nvidia chipset HDA Intel 0000:00:05.0: setting latency timer to 64 rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs udev: renamed network interface eth1 to eth0 udev: renamed network interface eth0_rename to eth1 EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (sda1): using internal journal usbcore: registered new interface driver uvcvideo USB Video Class driver (v1.0.0) rt2860sta: module is from the staging directory, the quality is unknown, you have been warned. usbcore: registered new interface driver snd-usb-audio EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended EXT3-fs (sda2): using internal journal EXT3-fs (sda2): mounted filesystem with ordered data mode REISERFS warning (device sda3): sh-2021 reiserfs_fill_super: can not find reiserfs on sda3 EXT3-fs (sda3): error: can't find ext3 filesystem on dev sda3. EXT2-fs (sda3): error: can't find an ext2 filesystem on dev sda3. EXT4-fs (sda3): VFS: Can't find ext4 filesystem cramfs: wrong magic SQUASHFS error: Can't find a SQUASHFS superblock on sda3 VFS: Can't find a Minix filesystem V1 | V2 | V3 on device sda3. FAT: invalid media value (0x75) VFS: Can't find a valid FAT filesystem on dev sda3. FAT: invalid media value (0x75) VFS: Can't find a valid FAT filesystem on dev sda3. BFS-fs: bfs_fill_super(): No BFS filesystem on sda3 (magic=458bc330) ISOFS: Unable to identify CD-ROM format. hfs: unable to find HFS+ superblock hfs: can't find a HFS filesystem on dev sda3. vxfs: WRONG superblock magic VFS: unable to find oldfs superblock on device sda3 VFS: could not find a valid V7 on sda3. HPFS: Bad magic ... probably not HPFS NTFS-fs warning (device sda3): is_boot_sector_ntfs(): Invalid boot sector checksum. NTFS-fs error (device sda3): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device sda3): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device sda3): ntfs_fill_super(): Not an NTFS volume. You didn't specify the type of your ufs filesystem mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ... >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old ufstype=old is supported read-only ufs_read_super: bad magic number LogFS: Start mount 0 BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: [] logfs_drop_inode+0x3c/0x68 *pde = 00000000 Oops: 0002 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:08.0/host2/target2:0:0/2:0:0:0/block/sda/dev Modules linked in: snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device rt2860sta(C) uvcvideo snd_hda_codec_realtek rtc_cmos asus_atk0110 rtc_core rtc_lib snd_hda_intel tpm_tis tpm tpm_bios 8139too snd_hda_codec snd_hwdep snd_pcm snd_timer snd k8temp soundcore snd_page_alloc atl1 i2c_nforce2 Pid: 5403, comm: mount Tainted: G C 2.6.39-rc5-git4-i486-1sys #1 System manufacturer System Product Name/M2N8-VMX EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at logfs_drop_inode+0x3c/0x68 EAX: 00000000 EBX: f1930000 ECX: f19301f4 EDX: f19301f4 ESI: f5249000 EDI: f50e9400 EBP: f1f5de68 ESP: f1f5de60 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process mount (pid: 5403, ti=f1f5c000 task=f5d0e730 task.ti=f1f5c000) Stack: c1e7ef2c f1930000 f1f5de7c c10e9f9d ffffffea f50e9400 f683b8e0 f1f5deb8 c12c5086 00000000 00000000 c153ee38 00000000 f5249000 00000400 f5249000 f683b8c0 00000040 0000000a 00000000 f5160480 f5160480 f1f5def0 c10d9545 Call Trace: [] iput+0x5c/0x119 [] logfs_mount+0x446/0x5c1 [] ? ida_get_new_above+0x16c/0x186 [] mount_fs+0x68/0x13e [] ? kstrdup+0x30/0x41 [] vfs_kern_mount+0x53/0x7f [] do_kern_mount+0x3c/0xbb [] do_mount+0x61d/0x669 [] ? copy_mount_options+0xe/0xe6 [] ? memdup_user+0x34/0x4b [] ? strndup_user+0x31/0x42 [] sys_mount+0x6d/0x99 [] syscall_call+0x7/0xb Code: 8c 01 00 00 b8 ac 98 6a c2 e8 19 8e b5 00 8b 83 f8 01 00 00 8d 8b f4 01 00 00 8b 93 f4 01 00 00 89 42 04 89 10 8b 86 54 02 00 00 48 04 89 83 f4 01 00 00 8d 86 54 02 00 00 89 83 f8 01 00 00 EIP: [] logfs_drop_inode+0x3c/0x68 SS:ESP 0068:f1f5de60 CR2: 0000000000000004 ---[ end trace b1ee68fcb3898d06 ]---