| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <2F3D4669-91BC-400F-8A0F-D854DBB9C756@slimlogic.co.uk>
Date: Tue, 3 May 2011 11:19:07 -0500
From: Jorge Eduardo Candelaria <jedu@...mlogic.co.uk>
To: linux-kernel@...r.kernel.org
Cc: broonie@...nsource.wolfsonmicro.com, sameo@...ux.intel.com,
lrg@...com, Graeme Gregory <gg@...mlogic.co.uk>,
grant.likely@...retlab.ca
Subject: [PATCH 5/5] TPS65911: Comparator: Add comparator driver
This driver adds functionality to the tps65911 chip driver.
Two of the comparators are configurable by software and measures
VCCS voltage to detect high or low voltage scenarios.
Signed-off-by: Jorge Eduardo Candelaria <jedu@...mlogic.co.uk>
---
drivers/mfd/Kconfig | 7 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/tps65911-comparator.c | 196 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/tps65910.h | 4 +
4 files changed, 208 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/tps65911-comparator.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 65930a7..7d09045 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -679,6 +679,13 @@ config MFD_TPS65910
if you say yes here you get support for the TPS65910 series of
Power Management chips.
+config PS65911_COMPARATOR
+ tristate "TPS65911 Comparator"
+ depends on MFD_TPS65910
+ help
+ if you say yes here you get support for the TPS65910 comparator
+ module.
+
endif # MFD_SUPPORT
menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c771eed..7ae4e2a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -89,3 +89,4 @@ obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o
obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-gpio.o tps65910-irq.o
+obj-$(CONFIG_TPS65911_COMP) += tps65911-comparator.o
diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c
new file mode 100644
index 0000000..cd2d5f8
--- /dev/null
+++ b/drivers/mfd/tps65911-comparator.c
@@ -0,0 +1,196 @@
+/*
+ * tps65910.c -- TI TPS6591x
+ *
+ * Copyright 2010 Texas Instruments Inc.
+ *
+ * Author: Jorge Eduardo Candelaria <jedu@...mlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/debugfs.h>
+#include <linux/gpio.h>
+#include <linux/mfd/tps65910.h>
+
+#define COMP 0
+#define COMP1 1
+#define COMP2 2
+
+/* Comparator 1 voltage selection table in milivolts */
+static const u16 COMP1_VSEL_TABLE[] = {
+ 0, 2500, 2500, 2500, 2500, 2550, 2600, 2650,
+ 2700, 2750, 2800, 2850, 2900, 2950, 3000, 3050,
+ 3100, 3150, 3200, 3250, 3300, 3350, 3400, 3450,
+ 3500,
+};
+
+/* Comparator 2 voltage selection table in milivolts */
+static const u16 COMP2_VSEL_TABLE[] = {
+ 0, 2500, 2500, 2500, 2500, 2550, 2600, 2650,
+ 2700, 2750, 2800, 2850, 2900, 2950, 3000, 3050,
+ 3100, 3150, 3200, 3250, 3300, 3350, 3400, 3450,
+ 3500,
+};
+
+struct comparator {
+ const char *name;
+ int reg;
+ int uV_max;
+ const u16 *vsel_table;
+};
+
+static struct comparator tps_comparators[] = {
+ {
+ .name = "COMP1",
+ .reg = TPS65911_VMBCH,
+ .uV_max = 3500,
+ .vsel_table = COMP1_VSEL_TABLE,
+ },
+ {
+ .name = "COMP2",
+ .reg = TPS65911_VMBCH2,
+ .uV_max = 3500,
+ .vsel_table = COMP2_VSEL_TABLE,
+ },
+};
+
+static int comp_threshold_set(struct tps65910 *tps65910, int id, int voltage)
+{
+ struct comparator tps_comp = tps_comparators[id];
+ int curr_voltage = 0;
+ int ret;
+ u8 index = 0, val;
+
+ if (id == COMP)
+ return 0;
+
+ while (curr_voltage < tps_comp.uV_max) {
+ curr_voltage = tps_comp.vsel_table[index];
+ if (curr_voltage >= voltage)
+ break;
+ else if (curr_voltage < voltage)
+ index ++;
+ }
+
+ if (curr_voltage > tps_comp.uV_max)
+ return -EINVAL;
+
+ val = index << 1;
+ ret = tps65910->write(tps65910, tps_comp.reg, 1, &val);
+
+ return ret;
+}
+
+static int comp_threshold_get(struct tps65910 *tps65910, int id)
+{
+ struct comparator tps_comp = tps_comparators[id];
+ int ret;
+ u8 val;
+
+ if (id == COMP)
+ return 0;
+
+ ret = tps65910->read(tps65910, tps_comp.reg, 1, &val);
+ if (ret < 0)
+ return ret;
+
+ val >>= 1;
+ return tps_comp.vsel_table[val];
+}
+
+static ssize_t comp_threshold_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tps65910 *tps65910 = dev_get_drvdata(dev->parent);
+ struct attribute comp_attr = attr->attr;
+ int id, uVolt;
+
+ if (!strcmp(comp_attr.name, "comp1_threshold"))
+ id = COMP1;
+ else if (!strcmp(comp_attr.name, "comp2_threshold"))
+ id = COMP2;
+ else
+ return -EINVAL;
+
+ uVolt = comp_threshold_get(tps65910, id);
+
+ return sprintf(buf, "%d\n", uVolt);
+}
+
+static DEVICE_ATTR(comp1_threshold, S_IRUGO, comp_threshold_show, NULL);
+static DEVICE_ATTR(comp2_threshold, S_IRUGO, comp_threshold_show, NULL);
+
+static __devinit int tps65911_comparator_probe(struct platform_device *pdev)
+{
+ struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent);
+ struct tps65910_platform_data *pdata = dev_get_platdata(tps65910->dev);
+ int ret;
+
+ ret = comp_threshold_set(tps65910, COMP1, pdata->vmbch_threshold);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot set COMP1 threshold\n");
+ return ret;
+ }
+
+ ret = comp_threshold_set(tps65910, COMP2, pdata->vmbch2_threshold);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot set COMP2 theshold\n");
+ return ret;
+ }
+
+ /* Create sysfs entry */
+ ret = device_create_file(&pdev->dev, &dev_attr_comp1_threshold);
+ if (ret < 0)
+ dev_err(&pdev->dev, "failed to add COMP1 sysfs file\n");
+
+ ret = device_create_file(&pdev->dev, &dev_attr_comp2_threshold);
+ if (ret < 0)
+ dev_err(&pdev->dev, "failed to add COMP2 sysfs file\n");
+
+ return ret;
+}
+
+static __devexit int tps65911_comparator_remove(struct platform_device *pdev)
+{
+ struct tps65910 *tps65910;
+
+ tps65910 = dev_get_drvdata(pdev->dev.parent);
+
+ return 0;
+}
+
+static struct platform_driver tps65911_comparator_driver = {
+ .driver = {
+ .name = "tps65911-comparator",
+ .owner = THIS_MODULE,
+ },
+ .probe = tps65911_comparator_probe,
+ .remove = __devexit_p(tps65911_comparator_remove),
+};
+
+static int __init tps65911_comparator_init(void)
+{
+ return platform_driver_register(&tps65911_comparator_driver);
+}
+subsys_initcall(tps65911_comparator_init);
+
+static void __exit tps65911_comparator_exit(void)
+{
+ platform_driver_unregister(&tps65911_comparator_driver);
+}
+module_exit(tps65911_comparator_exit);
+
+MODULE_AUTHOR("Jorge Eduardo Candelaria <jedu@...mlogic.co.uk>");
+MODULE_DESCRIPTION("TPS65911 comparator driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tps65911-comparator");
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 5f77006..8bb85b9 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -121,6 +121,8 @@
#define TPS65911_LDO6 0x35
#define TPS65911_LDO4 0x36
#define TPS65911_LDO3 0x37
+#define TPS65911_VMBCH 0x6A
+#define TPS65911_VMBCH2 0x6B
/*
* List of register bitfields for component TPS65910
@@ -746,6 +748,8 @@ struct tps65910_board {
int gpio_base;
int irq;
int irq_base;
+ int vmbch_threshold;
+ int vmbch2_threshold;
struct regulator_init_data *tps65910_pmic_init_data;
};
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists