Decompressing Linux... Parsing ELF... done. Booting the kernel. Initializing cgroup subsys cpu Linux version 2.6.39-rc5-i486-1sys+ (mingo@sirius) (gcc version 4.6.0 20110419 (Red Hat 4.6.0-5) (GCC) ) #122580 SMP Wed May 4 11:13:48 CEST 2011 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) bootconsole [earlyser0] enabled debug: ignoring loglevel setting. Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI 2.3 present. DMI: System manufacturer System Product Name/A8N-E, BIOS ASUS A8N-E ACPI BIOS Revision 1008 08/22/2005 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x3fff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 0000000000 mask FFC0000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f5680] f5680 mpc: f1400-f152c initial memory mapped : 0 - 02c00000 Base memory trampoline at [c009b000] 9b000 size 16384 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 2bfb000-2c00000 ACPI: RSDP 000f76f0 00014 (v00 Nvidia) ACPI: RSDT 3fff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 3fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 3fff3180 06264 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) ACPI: FACS 3fff0000 00040 ACPI: SRAT 3fff9500 000A0 (v01 AMD HAMMER 00000001 AMD 00000001) ACPI: MCFG 3fff9600 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) ACPI: APIC 3fff9440 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 mapped APIC to ffffb000 ( fee00000) 135MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003fff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003fff0 On node 0 totalpages: 262015 free_area_init_node: node 0, pgdat c2297440, node_mem_map f6ffd200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 272 pages used for memmap HighMem zone: 34530 pages, LIFO batch:7 Using APIC driver default Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 mapped APIC to ffffb000 ( fee00000) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) Int: type 0, pol 1, trig 1, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) Int: type 0, pol 1, trig 1, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 02, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 ACPI: IRQ9 used by override. Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs mapped IOAPIC to ffffa000 (fec00000) nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 12 pages/cpu @f6800000 s27648 r0 d21504 u2097152 pcpu-alloc: s27648 r0 d21504 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 Kernel command line: root=/dev/sda1 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 3 sysrq: sysrq always enabled. PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0003fff0) Memory: 1015968k/1048512k available (13778k kernel code, 32092k reserved, 5325k data, 932k init, 139208k highmem) virtual kernel memory layout: fixmap : 0xffd36000 - 0xfffff000 (2852 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc22a9000 - 0xc2392000 ( 932 kB) .data : 0xc1d74a0c - 0xc22a8070 (5325 kB) .text : 0xc1000000 - 0xc1d74a0c (13778 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. NR_IRQS:1280 CPU 0 irqstacks, hard=f640e000 soft=f6420000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled Fast TSC calibration using PIT Detected 2010.445 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.89 BogoMIPS (lpj=2010445) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks ACPI: Core revision 20110316 Enabling APIC mode: Flat. Using 1 I/O APICs enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) apic 2 pin 16 not connected apic 2 pin 17 not connected apic 2 pin 18 not connected apic 2 pin 19 not connected apic 2 pin 20 not connected apic 2 pin 21 not connected apic 2 pin 22 not connected apic 2 pin 23 not connected ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1256244 ... PM-Timer delta = 357899 ... PM-Timer result ok ..... delta 1256244 ..... mult: 53963471 ..... calibration result: 200999 ..... CPU clock speed is 2009.0990 MHz. ..... host bus clock speed is 200.0999 MHz. calling trace_init_flags_sys_exit+0x0/0x11 @ 1 initcall trace_init_flags_sys_exit+0x0/0x11 returned 0 after 0 usecs calling trace_init_flags_sys_enter+0x0/0x11 @ 1 initcall trace_init_flags_sys_enter+0x0/0x11 returned 0 after 0 usecs calling init_hw_perf_events+0x0/0xdaa @ 1 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f initcall init_hw_perf_events+0x0/0xdaa returned 0 after 8788 usecs calling migration_init+0x0/0x59 @ 1 initcall migration_init+0x0/0x59 returned 0 after 0 usecs calling spawn_ksoftirqd+0x0/0x41 @ 1 initcall spawn_ksoftirqd+0x0/0x41 returned 0 after 0 usecs calling init_workqueues+0x0/0x2ca @ 1 initcall init_workqueues+0x0/0x2ca returned 0 after 0 usecs calling init_jump_label_module+0x0/0xf @ 1 initcall init_jump_label_module+0x0/0xf returned 0 after 0 usecs calling init_jump_label+0x0/0xde @ 1 initcall init_jump_label+0x0/0xde returned 0 after 976 usecs calling init_call_single_data+0x0/0x6b @ 1 initcall init_call_single_data+0x0/0x6b returned 0 after 0 usecs calling cpu_stop_init+0x0/0x7f @ 1 initcall cpu_stop_init+0x0/0x7f returned 0 after 0 usecs calling relay_init+0x0/0x11 @ 1 initcall relay_init+0x0/0x11 returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x12b @ 1 initcall tracer_alloc_buffers+0x0/0x12b returned 0 after 976 usecs calling init_trace_printk+0x0/0xf @ 1 initcall init_trace_printk+0x0/0xf returned 0 after 0 usecs calling mce_amd_init+0x0/0x14d @ 1 MCE: In-kernel MCE decoding enabled. initcall mce_amd_init+0x0/0x14d returned 0 after 976 usecs CPU 1 irqstacks, hard=f64ca000 soft=f64cc000 Booting Node 0, Processors #1 Ok. smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 masked ExtINT on CPU#1 Brought up 2 CPUs Total of 2 processors activated (8040.79 BogoMIPS). devtmpfs: initialized calling init_mmap_min_addr+0x0/0x11 @ 1 initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1 initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs calling net_ns_init+0x0/0xda @ 1 initcall net_ns_init+0x0/0xda returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x2f @ 1 PM: Registering ACPI NVS region at 3fff0000 (12288 bytes) initcall e820_mark_nvs_memory+0x0/0x2f returned 0 after 976 usecs calling cpufreq_tsc+0x0/0x26 @ 1 initcall cpufreq_tsc+0x0/0x26 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x11 @ 1 initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs calling reboot_init+0x0/0x11 @ 1 initcall reboot_init+0x0/0x11 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x1b @ 1 initcall init_lapic_sysfs+0x0/0x1b returned 0 after 0 usecs calling init_smp_flush+0x0/0x31 @ 1 initcall init_smp_flush+0x0/0x31 returned 0 after 0 usecs calling alloc_frozen_cpus+0x0/0xc @ 1 initcall alloc_frozen_cpus+0x0/0xc returned 0 after 0 usecs calling sysctl_init+0x0/0x29 @ 1 initcall sysctl_init+0x0/0x29 returned 0 after 0 usecs calling ksysfs_init+0x0/0x74 @ 1 initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0xf @ 1 initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs calling pm_init+0x0/0x62 @ 1 initcall pm_init+0x0/0x62 returned 0 after 0 usecs calling pm_disk_init+0x0/0x14 @ 1 initcall pm_disk_init+0x0/0x14 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x2e @ 1 initcall swsusp_header_init+0x0/0x2e returned 0 after 0 usecs calling init_zero_pfn+0x0/0x14 @ 1 initcall init_zero_pfn+0x0/0x14 returned 0 after 0 usecs calling fsnotify_init+0x0/0x22 @ 1 initcall fsnotify_init+0x0/0x22 returned 0 after 0 usecs calling filelock_init+0x0/0x2f @ 1 initcall filelock_init+0x0/0x2f returned 0 after 0 usecs calling init_aout_binfmt+0x0/0x11 @ 1 initcall init_aout_binfmt+0x0/0x11 returned 0 after 0 usecs calling init_misc_binfmt+0x0/0x38 @ 1 initcall init_misc_binfmt+0x0/0x38 returned 0 after 0 usecs calling init_script_binfmt+0x0/0x11 @ 1 initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x11 @ 1 initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs calling debugfs_init+0x0/0x4a @ 1 initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs calling securityfs_init+0x0/0x41 @ 1 initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs calling calibrate_xor_blocks+0x0/0x153 @ 1 xor: automatically using best checksumming function: pIII_sse pIII_sse : 5988.000 MB/sec xor: using function: pIII_sse (5988.000 MB/sec) initcall calibrate_xor_blocks+0x0/0x153 returned 0 after 7811 usecs calling random32_init+0x0/0xa1 @ 1 initcall random32_init+0x0/0xa1 returned 0 after 0 usecs calling sfi_sysfs_init+0x0/0xba @ 1 initcall sfi_sysfs_init+0x0/0xba returned 0 after 0 usecs calling virtio_init+0x0/0x27 @ 1 initcall virtio_init+0x0/0x27 returned 0 after 0 usecs calling regulator_init+0x0/0x5e @ 1 print_constraints: dummy: initcall regulator_init+0x0/0x5e returned 0 after 976 usecs calling cpufreq_core_init+0x0/0x7e @ 1 initcall cpufreq_core_init+0x0/0x7e returned 0 after 0 usecs calling cpuidle_init+0x0/0x32 @ 1 initcall cpuidle_init+0x0/0x32 returned 0 after 0 usecs calling sock_init+0x0/0x78 @ 1 initcall sock_init+0x0/0x78 returned 0 after 0 usecs calling net_inuse_init+0x0/0x22 @ 1 initcall net_inuse_init+0x0/0x22 returned 0 after 0 usecs calling netpoll_init+0x0/0x2f @ 1 initcall netpoll_init+0x0/0x2f returned 0 after 0 usecs calling netlink_proto_init+0x0/0x188 @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x188 returned 0 after 976 usecs calling olpc_init+0x0/0x24d @ 1 initcall olpc_init+0x0/0x24d returned 0 after 0 usecs calling bdi_class_init+0x0/0x3c @ 1 initcall bdi_class_init+0x0/0x3c returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x1e @ 1 initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs calling gpiolib_sysfs_init+0x0/0x74 @ 1 initcall gpiolib_sysfs_init+0x0/0x74 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x14 @ 1 initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs calling pci_driver_init+0x0/0xf @ 1 initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs calling rio_bus_init+0x0/0x2a @ 1 initcall rio_bus_init+0x0/0x2a returned 0 after 0 usecs calling backlight_class_init+0x0/0x53 @ 1 initcall backlight_class_init+0x0/0x53 returned 0 after 0 usecs calling video_output_class_init+0x0/0x14 @ 1 initcall video_output_class_init+0x0/0x14 returned 0 after 0 usecs calling tty_class_init+0x0/0x2b @ 1 initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xc9 @ 1 initcall vtconsole_class_init+0x0/0xc9 returned 0 after 0 usecs calling wakeup_sources_debugfs_init+0x0/0x2f @ 1 initcall wakeup_sources_debugfs_init+0x0/0x2f returned 0 after 0 usecs calling spi_init+0x0/0x7e @ 1 initcall spi_init+0x0/0x7e returned 0 after 0 usecs calling i2c_init+0x0/0x59 @ 1 initcall i2c_init+0x0/0x59 returned 0 after 0 usecs calling eisa_init+0x0/0x27 @ 1 EISA bus registered initcall eisa_init+0x0/0x27 returned 0 after 976 usecs calling lguest_devices_init+0x0/0x146 @ 1 initcall lguest_devices_init+0x0/0x146 returned 0 after 0 usecs calling amd_postcore_init+0x0/0x13e @ 1 node 0 link 0: io port [1000, fffff] TOM: 0000000040000000 aka 1024M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [feb00000, fec0ffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, fed3ffff] bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0x40000000-0xffffffff] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff] bus: 00 index 3 [mem 0x000a0000-0x000bffff] initcall amd_postcore_init+0x0/0x13e returned 0 after 11716 usecs calling arch_kdebugfs_init+0x0/0x1e @ 1 initcall arch_kdebugfs_init+0x0/0x1e returned 0 after 0 usecs calling init_pit_clocksource+0x0/0x95 @ 1 initcall init_pit_clocksource+0x0/0x95 returned 0 after 0 usecs calling configure_trampolines+0x0/0x1f @ 1 initcall configure_trampolines+0x0/0x1f returned 0 after 0 usecs calling mtrr_if_init+0x0/0x56 @ 1 initcall mtrr_if_init+0x0/0x56 returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x27 @ 1 initcall ffh_cstate_init+0x0/0x27 returned -1 after 0 usecs initcall ffh_cstate_init+0x0/0x27 returned with error code -1 calling acpi_pci_init+0x0/0x59 @ 1 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x59 returned 0 after 976 usecs calling dma_bus_init+0x0/0x32 @ 1 initcall dma_bus_init+0x0/0x32 returned 0 after 0 usecs calling dma_channel_table_init+0x0/0xe0 @ 1 initcall dma_channel_table_init+0x0/0xe0 returned 0 after 0 usecs calling dmi_id_init+0x0/0x28e @ 1 initcall dmi_id_init+0x0/0x28e returned 0 after 0 usecs calling dca_init+0x0/0x21 @ 1 dca service started, version 1.12.1 initcall dca_init+0x0/0x21 returned 0 after 976 usecs calling pci_arch_init+0x0/0x63 @ 1 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x63 returned 0 after 3905 usecs calling topology_init+0x0/0x36 @ 1 initcall topology_init+0x0/0x36 returned 0 after 0 usecs calling mtrr_init_finialize+0x0/0x30 @ 1 initcall mtrr_init_finialize+0x0/0x30 returned 0 after 0 usecs calling mca_init+0x0/0x31e @ 1 initcall mca_init+0x0/0x31e returned -19 after 0 usecs calling param_sysfs_init+0x0/0x159 @ 1 initcall param_sysfs_init+0x0/0x159 returned 0 after 39056 usecs calling pm_sysrq_init+0x0/0x1b @ 1 initcall pm_sysrq_init+0x0/0x1b returned 0 after 0 usecs calling default_bdi_init+0x0/0xaa @ 1 initcall default_bdi_init+0x0/0xaa returned 0 after 0 usecs calling init_bio+0x0/0xfb @ 1 bio: create slab at 0 initcall init_bio+0x0/0xfb returned 0 after 976 usecs calling fsnotify_notification_init+0x0/0x9c @ 1 initcall fsnotify_notification_init+0x0/0x9c returned 0 after 0 usecs calling cryptomgr_init+0x0/0xf @ 1 initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs calling blk_settings_init+0x0/0x1d @ 1 initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2f @ 1 initcall blk_ioc_init+0x0/0x2f returned 0 after 0 usecs calling blk_softirq_init+0x0/0x54 @ 1 initcall blk_softirq_init+0x0/0x54 returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x54 @ 1 initcall blk_iopoll_setup+0x0/0x54 returned 0 after 0 usecs calling genhd_device_init+0x0/0x6a @ 1 initcall genhd_device_init+0x0/0x6a returned 0 after 0 usecs calling blk_dev_integrity_init+0x0/0x2f @ 1 initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 usecs calling raid6_select_algo+0x0/0x17a @ 1 raid6: int32x1 539 MB/s raid6: int32x2 886 MB/s raid6: int32x4 535 MB/s raid6: int32x8 488 MB/s raid6: mmxx1 1656 MB/s raid6: mmxx2 3078 MB/s raid6: sse1x1 1515 MB/s raid6: sse1x2 2558 MB/s raid6: sse2x1 2585 MB/s raid6: sse2x2 3339 MB/s raid6: using algorithm sse2x2 (3339 MB/s) initcall raid6_select_algo+0x0/0x17a returned 0 after 189424 usecs calling gpiolib_debugfs_init+0x0/0x2a @ 1 initcall gpiolib_debugfs_init+0x0/0x2a returned 0 after 0 usecs calling stmpe_gpio_init+0x0/0xf @ 1 initcall stmpe_gpio_init+0x0/0xf returned 0 after 0 usecs calling tc3589x_gpio_init+0x0/0xf @ 1 initcall tc3589x_gpio_init+0x0/0xf returned 0 after 0 usecs calling sx150x_init+0x0/0x11 @ 1 initcall sx150x_init+0x0/0x11 returned 0 after 0 usecs calling pci_slot_init+0x0/0x42 @ 1 initcall pci_slot_init+0x0/0x42 returned 0 after 0 usecs calling fbmem_init+0x0/0x96 @ 1 initcall fbmem_init+0x0/0x96 returned 0 after 0 usecs calling acpi_init+0x0/0x270 @ 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing initcall acpi_init+0x0/0x270 returned 0 after 30268 usecs calling dock_init+0x0/0xb3 @ 1 ACPI: No dock devices found. initcall dock_init+0x0/0xb3 returned 0 after 1952 usecs calling acpi_pci_root_init+0x0/0x2a @ 1 HEST: Table not found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) pci 0000:00:00.0: [10de:005e] type 0 class 0x000580 pci 0000:00:01.0: [10de:0050] type 0 class 0x000601 HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05 pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc1f] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03 pci 0000:00:02.0: reg 10: [mem 0xda102000-0xda102fff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03 pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: [10de:0059] type 0 class 0x000401 pci 0000:00:04.0: reg 10: [io 0xd400-0xd4ff] pci 0000:00:04.0: reg 14: [io 0xd800-0xd8ff] pci 0000:00:04.0: reg 18: [mem 0xda101000-0xda101fff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:06.0: [10de:0053] type 0 class 0x000101 pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604 pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680 pci 0000:00:0a.0: reg 10: [mem 0xda100000-0xda100fff] pci 0000:00:0a.0: reg 14: [io 0xd000-0xd007] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604 pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0c.0: PME# disabled pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604 pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604 pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0e.0: PME# disabled pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 PCI: peer root bus 00 res updated from pci conf pci 0000:05:07.0: [10ec:8139] type 0 class 0x000200 pci 0000:05:07.0: reg 10: [io 0xc000-0xc0ff] pci 0000:05:07.0: reg 14: [mem 0xda000000-0xda0000ff] pci 0000:05:07.0: supports D1 D2 pci 0000:05:07.0: PME# supported from D1 D2 D3hot pci 0000:05:07.0: PME# disabled pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode) pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode) pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:0b.0: PCI bridge to [bus 04-04] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:0c.0: PCI bridge to [bus 03-03] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:0d.0: PCI bridge to [bus 02-02] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:01:00.0: [1002:5b60] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref] pci 0000:01:00.0: reg 14: [io 0xb000-0xb0ff] pci 0000:01:00.0: reg 18: [mem 0xd9000000-0xd900ffff] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: [1002:5b70] type 0 class 0x000380 pci 0000:01:00.1: reg 10: [mem 0xd9010000-0xd901ffff] pci 0000:01:00.1: supports D1 D2 pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:0e.0: PCI bridge to [bus 01-01] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) Unable to assume _OSC PCIe control. Disabling ASPM initcall acpi_pci_root_init+0x0/0x2a returned 0 after 518475 usecs calling acpi_pci_link_init+0x0/0x3a @ 1 ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. initcall acpi_pci_link_init+0x0/0x3a returned 0 after 192353 usecs calling pnp_init+0x0/0xf @ 1 initcall pnp_init+0x0/0xf returned 0 after 0 usecs calling twlreg_init+0x0/0xf @ 1 initcall twlreg_init+0x0/0xf returned 0 after 0 usecs calling pm8607_regulator_init+0x0/0xf @ 1 initcall pm8607_regulator_init+0x0/0xf returned 0 after 0 usecs calling ab8500_regulator_init+0x0/0x2e @ 1 initcall ab8500_regulator_init+0x0/0x2e returned 0 after 0 usecs calling misc_init+0x0/0xad @ 1 initcall misc_init+0x0/0xad returned 0 after 0 usecs calling vga_arb_device_init+0x0/0x82 @ 1 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded initcall vga_arb_device_init+0x0/0x82 returned 0 after 1952 usecs calling cn_init+0x0/0x9d @ 1 initcall cn_init+0x0/0x9d returned 0 after 0 usecs calling tifm_init+0x0/0x78 @ 1 initcall tifm_init+0x0/0x78 returned 0 after 0 usecs calling pm860x_i2c_init+0x0/0x30 @ 1 initcall pm860x_i2c_init+0x0/0x30 returned 0 after 0 usecs calling stmpe_init+0x0/0x11 @ 1 initcall stmpe_init+0x0/0x11 returned 0 after 0 usecs calling tc3589x_init+0x0/0x11 @ 1 initcall tc3589x_init+0x0/0x11 returned 0 after 0 usecs calling wm831x_i2c_init+0x0/0x30 @ 1 initcall wm831x_i2c_init+0x0/0x30 returned 0 after 0 usecs calling wm831x_spi_init+0x0/0xdc @ 1 initcall wm831x_spi_init+0x0/0xdc returned 0 after 0 usecs calling wm8350_i2c_init+0x0/0x11 @ 1 initcall wm8350_i2c_init+0x0/0x11 returned 0 after 0 usecs calling twl_init+0x0/0x11 @ 1 initcall twl_init+0x0/0x11 returned 0 after 0 usecs calling ezx_pcap_init+0x0/0xf @ 1 initcall ezx_pcap_init+0x0/0xf returned 0 after 0 usecs calling da903x_init+0x0/0x11 @ 1 initcall da903x_init+0x0/0x11 returned 0 after 0 usecs calling max8925_i2c_init+0x0/0x30 @ 1 initcall max8925_i2c_init+0x0/0x30 returned 0 after 0 usecs calling max8997_i2c_init+0x0/0x11 @ 1 initcall max8997_i2c_init+0x0/0x11 returned 0 after 0 usecs calling max8998_i2c_init+0x0/0x11 @ 1 initcall max8998_i2c_init+0x0/0x11 returned 0 after 0 usecs calling ab3100_i2c_init+0x0/0x11 @ 1 initcall ab3100_i2c_init+0x0/0x11 returned 0 after 0 usecs calling ab3550_i2c_init+0x0/0x11 @ 1 initcall ab3550_i2c_init+0x0/0x11 returned 0 after 0 usecs calling ab8500_sysctrl_init+0x0/0xf @ 1 initcall ab8500_sysctrl_init+0x0/0xf returned 0 after 0 usecs calling ab8500_debug_init+0x0/0xf @ 1 initcall ab8500_debug_init+0x0/0xf returned 0 after 0 usecs calling tps6586x_init+0x0/0x11 @ 1 initcall tps6586x_init+0x0/0x11 returned 0 after 0 usecs calling init_scsi+0x0/0x90 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x90 returned 0 after 976 usecs calling ata_init+0x0/0x29f @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x29f returned 0 after 2929 usecs calling phy_init+0x0/0x28 @ 1 initcall phy_init+0x0/0x28 returned 0 after 0 usecs calling init_pcmcia_cs+0x0/0x2d @ 1 initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 usecs calling usb_init+0x0/0x142 @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x142 returned 0 after 8787 usecs calling serio_init+0x0/0x2e @ 1 initcall serio_init+0x0/0x2e returned 0 after 0 usecs calling gameport_init+0x0/0x2e @ 1 initcall gameport_init+0x0/0x2e returned 0 after 0 usecs calling input_init+0x0/0xfd @ 1 initcall input_init+0x0/0xfd returned 0 after 0 usecs calling tca6416_keypad_init+0x0/0x11 @ 1 initcall tca6416_keypad_init+0x0/0x11 returned 0 after 0 usecs calling init_dvbdev+0x0/0xc2 @ 1 initcall init_dvbdev+0x0/0xc2 returned 0 after 0 usecs calling power_supply_class_init+0x0/0x35 @ 1 initcall power_supply_class_init+0x0/0x35 returned 0 after 0 usecs calling hwmon_init+0x0/0xe3 @ 1 initcall hwmon_init+0x0/0xe3 returned 0 after 0 usecs calling md_init+0x0/0x152 @ 1 initcall md_init+0x0/0x152 returned 0 after 0 usecs calling mmc_init+0x0/0x74 @ 1 initcall mmc_init+0x0/0x74 returned 0 after 976 usecs calling leds_init+0x0/0x39 @ 1 initcall leds_init+0x0/0x39 returned 0 after 0 usecs calling acpi_wmi_init+0x0/0x62 @ 1 wmi: Mapper loaded initcall acpi_wmi_init+0x0/0x62 returned 0 after 1952 usecs calling pci_subsys_init+0x0/0x44 @ 1 PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff] Expanded resource reserved due to conflict with PCI Bus #00 reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 000000003fff0000 - 000000003fffffff initcall pci_subsys_init+0x0/0x44 returned 0 after 32221 usecs calling proto_init+0x0/0xf @ 1 initcall proto_init+0x0/0xf returned 0 after 0 usecs calling net_dev_init+0x0/0x16b @ 1 initcall net_dev_init+0x0/0x16b returned 0 after 976 usecs calling neigh_init+0x0/0x7a @ 1 initcall neigh_init+0x0/0x7a returned 0 after 0 usecs calling fib_rules_init+0x0/0xa2 @ 1 initcall fib_rules_init+0x0/0xa2 returned 0 after 0 usecs calling pktsched_init+0x0/0xe4 @ 1 initcall pktsched_init+0x0/0xe4 returned 0 after 0 usecs calling tc_filter_init+0x0/0x50 @ 1 initcall tc_filter_init+0x0/0x50 returned 0 after 0 usecs calling tc_action_init+0x0/0x50 @ 1 initcall tc_action_init+0x0/0x50 returned 0 after 0 usecs calling genl_init+0x0/0x7b @ 1 initcall genl_init+0x0/0x7b returned 0 after 0 usecs calling cipso_v4_init+0x0/0x59 @ 1 initcall cipso_v4_init+0x0/0x59 returned 0 after 0 usecs calling wanrouter_init+0x0/0x5a @ 1 Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. initcall wanrouter_init+0x0/0x5a returned 0 after 976 usecs calling atm_init+0x0/0xd0 @ 1 NET: Registered protocol family 8 NET: Registered protocol family 20 initcall atm_init+0x0/0xd0 returned 0 after 1952 usecs calling wireless_nlevent_init+0x0/0xf @ 1 initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs calling netlbl_init+0x0/0x7d @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x7d returned 0 after 3905 usecs calling rfkill_init+0x0/0x7f @ 1 initcall rfkill_init+0x0/0x7f returned 0 after 0 usecs calling sysctl_init+0x0/0x3b @ 1 initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs calling ab8500_gpadc_init+0x0/0xf @ 1 initcall ab8500_gpadc_init+0x0/0xf returned 0 after 0 usecs calling print_ICs+0x0/0x491 @ 1 printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0829 ... PIC ISR: 0000 ... PIC ELCR: 0828 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 00040010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 000000e0 (e0) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 000008fd ... APIC ICR2: 02000000 ... APIC LVTT: 000200ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 00003112 ... APIC TMCCT: 000026f1 ... APIC TDCR: 00000003 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 003 0 0 0 0 0 1 1 30 01 003 0 0 0 0 0 1 1 31 02 003 1 0 0 0 0 0 0 32 03 003 1 0 0 0 0 1 1 33 04 003 0 0 0 0 0 1 1 34 05 003 1 0 0 0 0 1 1 35 06 003 0 0 0 0 0 1 1 36 07 003 1 0 0 0 0 1 1 37 08 003 0 0 0 0 0 1 1 38 09 003 0 1 0 0 0 1 1 39 0a 003 0 0 0 0 0 1 1 3A 0b 003 1 0 0 0 0 1 1 3B 0c 003 0 0 0 0 0 1 1 3C 0d 003 0 0 0 0 0 1 1 3D 0e 003 0 0 0 0 0 1 1 3E 0f 003 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. initcall print_ICs+0x0/0x491 returned 0 after 83971 usecs calling hpet_late_init+0x0/0xdd @ 1 initcall hpet_late_init+0x0/0xdd returned -19 after 0 usecs calling init_amd_nbs+0x0/0xb7 @ 1 initcall init_amd_nbs+0x0/0xb7 returned 0 after 0 usecs calling clocksource_done_booting+0x0/0x4f @ 1 initcall clocksource_done_booting+0x0/0x4f returned 0 after 0 usecs calling ftrace_init_debugfs+0x0/0x33 @ 1 initcall ftrace_init_debugfs+0x0/0x33 returned 0 after 0 usecs calling rb_init_debugfs+0x0/0x2f @ 1 initcall rb_init_debugfs+0x0/0x2f returned 0 after 0 usecs calling tracer_init_debugfs+0x0/0x32e @ 1 initcall tracer_init_debugfs+0x0/0x32e returned 0 after 0 usecs calling init_trace_printk_function_export+0x0/0x33 @ 1 initcall init_trace_printk_function_export+0x0/0x33 returned 0 after 0 usecs calling event_trace_init+0x0/0x269 @ 1 initcall event_trace_init+0x0/0x269 returned 0 after 7811 usecs calling init_pipe_fs+0x0/0x3d @ 1 initcall init_pipe_fs+0x0/0x3d returned 0 after 0 usecs calling eventpoll_init+0x0/0xef @ 1 initcall eventpoll_init+0x0/0xef returned 0 after 0 usecs calling anon_inode_init+0x0/0x102 @ 1 initcall anon_inode_init+0x0/0x102 returned 0 after 0 usecs calling fscache_init+0x0/0x1d0 @ 1 FS-Cache: Loaded initcall fscache_init+0x0/0x1d0 returned 0 after 976 usecs calling cachefiles_init+0x0/0x99 @ 1 CacheFiles: Loaded initcall cachefiles_init+0x0/0x99 returned 0 after 1952 usecs calling blk_scsi_ioctl_init+0x0/0x288 @ 1 initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 0 usecs calling acpi_event_init+0x0/0x76 @ 1 initcall acpi_event_init+0x0/0x76 returned 0 after 0 usecs calling pnp_system_init+0x0/0xf @ 1 initcall pnp_system_init+0x0/0xf returned 0 after 0 usecs calling pnpacpi_init+0x0/0x88 @ 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000dffff window] pnp 00:00: [mem 0x40000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [io 0x4000-0x407f] pnp 00:01: [io 0x4080-0x40ff] pnp 00:01: [io 0x4400-0x447f] pnp 00:01: [io 0x4480-0x44ff] pnp 00:01: [io 0x4800-0x487f] pnp 00:01: [io 0x4880-0x48ff] system 00:01: [io 0x4000-0x407f] has been reserved system 00:01: [io 0x4080-0x40ff] has been reserved system 00:01: [io 0x4400-0x447f] has been reserved system 00:01: [io 0x4480-0x44ff] has been reserved system 00:01: [io 0x4800-0x487f] has been reserved system 00:01: [io 0x4880-0x48ff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0010-0x001f] pnp 00:02: [io 0x0022-0x003f] pnp 00:02: [io 0x0044-0x005f] pnp 00:02: [io 0x0062-0x0063] pnp 00:02: [io 0x0065-0x006f] pnp 00:02: [io 0x0074-0x007f] pnp 00:02: [io 0x0091-0x0093] pnp 00:02: [io 0x00a2-0x00bf] pnp 00:02: [io 0x00e0-0x00ef] pnp 00:02: [io 0x04d0-0x04d1] pnp 00:02: [io 0x0800-0x0805] pnp 00:02: [io 0x0290-0x0297] system 00:02: [io 0x04d0-0x04d1] has been reserved system 00:02: [io 0x0800-0x0805] has been reserved system 00:02: [io 0x0290-0x0297] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: [dma 4] pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0080-0x0090] pnp 00:03: [io 0x0094-0x009f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [io 0x0070-0x0073] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) pnp 00:04: [irq 8] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0-0x00ff] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x03f0-0x03f5] pnp 00:07: [io 0x03f7] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) pnp 00:07: [irq 6] pnp 00:07: [dma 2] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:08: [io 0x03f8-0x03ff] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) pnp 00:08: [irq 4] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:09: [io 0x0378-0x037f] pnp 00:09: [io 0x0778-0x077b] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) pnp 00:09: [irq 7] pnp 00:09: [dma 3] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) pnp 00:0a: [irq 12] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active) pnp 00:0b: [io 0x0060] pnp 00:0b: [io 0x0064] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) pnp 00:0b: [irq 1] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0c: [io 0x0330-0x0331] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) pnp 00:0c: [irq 10] pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active) pnp 00:0d: [io 0x0201] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active) pnp 00:0e: [mem 0xe0000000-0xefffffff] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0f: [mem 0x000f0000-0x000f3fff] pnp 00:0f: [mem 0x000f4000-0x000f7fff] pnp 00:0f: [mem 0x000f8000-0x000fbfff] pnp 00:0f: [mem 0x000fc000-0x000fffff] pnp 00:0f: [mem 0x3fff0000-0x3fffffff] pnp 00:0f: [mem 0xffff0000-0xffffffff] pnp 00:0f: [mem 0x00000000-0x0009ffff] pnp 00:0f: [mem 0x00100000-0x3ffeffff] pnp 00:0f: [mem 0xfec00000-0xfec00fff] pnp 00:0f: [mem 0xfee00000-0xfeefffff] pnp 00:0f: [mem 0xfefff000-0xfeffffff] pnp 00:0f: [mem 0xfff80000-0xfff80fff] pnp 00:0f: [mem 0xfff90000-0xfffbffff] pnp 00:0f: [mem 0xfffed000-0xfffeffff] system 00:0f: [mem 0x000f0000-0x000f3fff] could not be reserved system 00:0f: [mem 0x000f4000-0x000f7fff] could not be reserved system 00:0f: [mem 0x000f8000-0x000fbfff] could not be reserved system 00:0f: [mem 0x000fc000-0x000fffff] could not be reserved system 00:0f: [mem 0x3fff0000-0x3fffffff] could not be reserved system 00:0f: [mem 0xffff0000-0xffffffff] has been reserved system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0f: [mem 0x00100000-0x3ffeffff] could not be reserved system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0f: [mem 0xfee00000-0xfeefffff] has been reserved system 00:0f: [mem 0xfefff000-0xfeffffff] has been reserved system 00:0f: [mem 0xfff80000-0xfff80fff] has been reserved system 00:0f: [mem 0xfff90000-0xfffbffff] has been reserved system 00:0f: [mem 0xfffed000-0xfffeffff] has been reserved system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x88 returned 0 after 203093 usecs calling pnpbios_init+0x0/0x35c @ 1 PnPBIOS: Disabled by ACPI PNP initcall pnpbios_init+0x0/0x35c returned -19 after 976 usecs calling chr_dev_init+0x0/0xc3 @ 1 initcall chr_dev_init+0x0/0xc3 returned 0 after 4882 usecs calling firmware_class_init+0x0/0x14 @ 1 initcall firmware_class_init+0x0/0x14 returned 0 after 0 usecs calling init_pcmcia_bus+0x0/0x5e @ 1 initcall init_pcmcia_bus+0x0/0x5e returned 0 after 0 usecs calling thermal_init+0x0/0x5f @ 1 initcall thermal_init+0x0/0x5f returned 0 after 0 usecs calling cpufreq_gov_performance_init+0x0/0xf @ 1 initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 usecs calling intel_mid_dma_init+0x0/0x16 @ 1 initcall intel_mid_dma_init+0x0/0x16 returned 0 after 0 usecs calling init_acpi_pm_clocksource+0x0/0x174 @ 1 Switching to clocksource acpi_pm initcall init_acpi_pm_clocksource+0x0/0x174 returned 0 after 35155 usecs calling pcibios_assign_resources+0x0/0x66 @ 1 pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x400000ff] pci 0000:00:02.1: BAR 0: set to [mem 0x40000000-0x400000ff] (PCI address [0x40000000-0x400000ff]) pci 0000:00:09.0: PCI bridge to [bus 05-05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff] pci 0000:00:09.0: bridge window [mem pref disabled] pci 0000:00:0b.0: PCI bridge to [bus 04-04] pci 0000:00:0b.0: bridge window [io disabled] pci 0000:00:0b.0: bridge window [mem disabled] pci 0000:00:0b.0: bridge window [mem pref disabled] pci 0000:00:0c.0: PCI bridge to [bus 03-03] pci 0000:00:0c.0: bridge window [io disabled] pci 0000:00:0c.0: bridge window [mem disabled] pci 0000:00:0c.0: bridge window [mem pref disabled] pci 0000:00:0d.0: PCI bridge to [bus 02-02] pci 0000:00:0d.0: bridge window [io disabled] pci 0000:00:0d.0: bridge window [mem disabled] pci 0000:00:0d.0: bridge window [mem pref disabled] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref] pci 0000:00:0e.0: PCI bridge to [bus 01-01] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff] pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff] pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] pci 0000:00:09.0: setting latency timer to 64 pci 0000:00:0b.0: setting latency timer to 64 pci 0000:00:0c.0: setting latency timer to 64 pci 0000:00:0d.0: setting latency timer to 64 pci 0000:00:0e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] pci_bus 0000:05: resource 5 [mem 0x40000000-0xffffffff] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref] initcall pcibios_assign_resources+0x0/0x66 returned 0 after 190713 usecs calling sysctl_core_init+0x0/0x2d @ 1 initcall sysctl_core_init+0x0/0x2d returned 0 after 20 usecs calling inet_init+0x0/0x20c @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) initcall inet_init+0x0/0x20c returned 0 after 38094 usecs calling af_unix_init+0x0/0x4d @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x4d returned 0 after 3002 usecs calling init_sunrpc+0x0/0x69 @ 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. initcall init_sunrpc+0x0/0x69 returned 0 after 11800 usecs calling pci_apply_final_quirks+0x0/0x100 @ 1 pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0b.0: Linking AER extended capability pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Linking AER extended capability pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Linking AER extended capability pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Found disabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Linking AER extended capability pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 initcall pci_apply_final_quirks+0x0/0x100 returned 0 after 85200 usecs calling populate_rootfs+0x0/0x215 @ 1 initcall populate_rootfs+0x0/0x215 returned 0 after 59 usecs calling pci_iommu_init+0x0/0x34 @ 1 initcall pci_iommu_init+0x0/0x34 returned 0 after 2 usecs calling i8259A_init_ops+0x0/0x1d @ 1 initcall i8259A_init_ops+0x0/0x1d returned 0 after 2 usecs calling sbf_init+0x0/0xc0 @ 1 initcall sbf_init+0x0/0xc0 returned 0 after 1 usecs calling init_tsc_clocksource+0x0/0x58 @ 1 initcall init_tsc_clocksource+0x0/0x58 returned 0 after 4 usecs calling add_rtc_cmos+0x0/0x7e @ 1 initcall add_rtc_cmos+0x0/0x7e returned 0 after 5 usecs calling i8237A_init_ops+0x0/0x11 @ 1 initcall i8237A_init_ops+0x0/0x11 returned 0 after 10 usecs calling cache_sysfs_init+0x0/0x5a @ 1 initcall cache_sysfs_init+0x0/0x5a returned 0 after 400 usecs calling mcheck_init_device+0x0/0xe1 @ 1 initcall mcheck_init_device+0x0/0xe1 returned 0 after 224 usecs calling threshold_init_device+0x0/0x44 @ 1 initcall threshold_init_device+0x0/0x44 returned 0 after 3 usecs calling inject_init+0x0/0x2d @ 1 Machine check injector initialized initcall inject_init+0x0/0x2d returned 0 after 3071 usecs calling thermal_throttle_init_device+0x0/0x77 @ 1 initcall thermal_throttle_init_device+0x0/0x77 returned 0 after 1 usecs calling powernow_k6_init+0x0/0x8b @ 1 initcall powernow_k6_init+0x0/0x8b returned -19 after 1 usecs calling eps_init+0x0/0x3e @ 1 initcall eps_init+0x0/0x3e returned -19 after 1 usecs calling elanfreq_init+0x0/0x3d @ 1 elanfreq: error: no Elan processor found! initcall elanfreq_init+0x0/0x3d returned -19 after 3665 usecs calling sc520_freq_init+0x0/0x6c @ 1 initcall sc520_freq_init+0x0/0x6c returned -19 after 1 usecs calling longrun_init+0x0/0x2d @ 1 initcall longrun_init+0x0/0x2d returned -19 after 1 usecs calling cpufreq_gx_init+0x0/0x13d @ 1 initcall cpufreq_gx_init+0x0/0x13d returned -19 after 2 usecs calling speedstep_init+0x0/0x1a9 @ 1 initcall speedstep_init+0x0/0x1a9 returned -19 after 2 usecs calling speedstep_init+0x0/0xb5 @ 1 initcall speedstep_init+0x0/0xb5 returned -19 after 2 usecs calling nforce2_init+0x0/0x6f @ 1 cpufreq-nforce2: No nForce2 chipset. initcall nforce2_init+0x0/0x6f returned -19 after 3257 usecs calling msr_init+0x0/0x100 @ 1 initcall msr_init+0x0/0x100 returned 0 after 192 usecs calling cpuid_init+0x0/0x100 @ 1 initcall cpuid_init+0x0/0x100 returned 0 after 181 usecs calling apm_init+0x0/0x39a @ 1 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. initcall apm_init+0x0/0x39a returned -19 after 8209 usecs calling ioapic_init_ops+0x0/0x54 @ 1 initcall ioapic_init_ops+0x0/0x54 returned 0 after 3 usecs calling add_pcspkr+0x0/0x43 @ 1 initcall add_pcspkr+0x0/0x43 returned 0 after 58 usecs calling microcode_init+0x0/0x12a @ 1 microcode: CPU0: family 15 not supported initcall microcode_init+0x0/0x12a returned -22 after 3696 usecs initcall microcode_init+0x0/0x12a returned with error code -22 calling start_periodic_check_for_corruption+0x0/0x46 @ 1 initcall start_periodic_check_for_corruption+0x0/0x46 returned 0 after 2 usecs calling add_bus_probe+0x0/0x1c @ 1 initcall add_bus_probe+0x0/0x1c returned 0 after 1 usecs calling aes_init+0x0/0xf @ 1 initcall aes_init+0x0/0xf returned 0 after 34 usecs calling init+0x0/0xf @ 1 initcall init+0x0/0xf returned 0 after 34 usecs calling iris_init+0x0/0x5f @ 1 The force parameter has not been set to 1 so the Iris poweroff handler will not be installed. initcall iris_init+0x0/0x5f returned -19 after 8068 usecs calling scx200_init+0x0/0x23 @ 1 scx200: NatSemi SCx200 Driver initcall scx200_init+0x0/0x23 returned 0 after 2725 usecs calling proc_execdomains_init+0x0/0x27 @ 1 initcall proc_execdomains_init+0x0/0x27 returned 0 after 6 usecs calling ioresources_init+0x0/0x44 @ 1 initcall ioresources_init+0x0/0x44 returned 0 after 4 usecs calling uid_cache_init+0x0/0x83 @ 1 initcall uid_cache_init+0x0/0x83 returned 0 after 7 usecs calling init_posix_timers+0x0/0x18f @ 1 initcall init_posix_timers+0x0/0x18f returned 0 after 5 usecs calling init_posix_cpu_timers+0x0/0x9b @ 1 initcall init_posix_cpu_timers+0x0/0x9b returned 0 after 2 usecs calling nsproxy_cache_init+0x0/0x32 @ 1 initcall nsproxy_cache_init+0x0/0x32 returned 0 after 3 usecs calling create_proc_profile+0x0/0x1a3 @ 1 initcall create_proc_profile+0x0/0x1a3 returned 0 after 2 usecs calling timekeeping_init_ops+0x0/0x11 @ 1 initcall timekeeping_init_ops+0x0/0x11 returned 0 after 2 usecs calling init_clocksource_sysfs+0x0/0x43 @ 1 initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 83 usecs calling init_timer_list_procfs+0x0/0x30 @ 1 initcall init_timer_list_procfs+0x0/0x30 returned 0 after 3 usecs calling futex_init+0x0/0x57 @ 1 initcall futex_init+0x0/0x57 returned 0 after 6 usecs calling proc_dma_init+0x0/0x27 @ 1 initcall proc_dma_init+0x0/0x27 returned 0 after 3 usecs calling proc_modules_init+0x0/0x27 @ 1 initcall proc_modules_init+0x0/0x27 returned 0 after 3 usecs calling kallsyms_init+0x0/0x2a @ 1 initcall kallsyms_init+0x0/0x2a returned 0 after 2 usecs calling snapshot_device_init+0x0/0xf @ 1 initcall snapshot_device_init+0x0/0xf returned 0 after 64 usecs calling user_namespaces_init+0x0/0x32 @ 1 initcall user_namespaces_init+0x0/0x32 returned 0 after 19 usecs calling pid_namespaces_init+0x0/0x32 @ 1 initcall pid_namespaces_init+0x0/0x32 returned 0 after 2 usecs calling ikconfig_init+0x0/0x43 @ 1 initcall ikconfig_init+0x0/0x43 returned 0 after 3 usecs calling audit_init+0x0/0x130 @ 1 audit: initializing netlink socket (disabled) type=2000 audit(1304541769.146:1): initialized initcall audit_init+0x0/0x130 returned 0 after 8099 usecs calling audit_watch_init+0x0/0x31 @ 1 initcall audit_watch_init+0x0/0x31 returned 0 after 2 usecs calling audit_tree_init+0x0/0x42 @ 1 initcall audit_tree_init+0x0/0x42 returned 0 after 3 usecs calling utsname_sysctl_init+0x0/0x11 @ 1 initcall utsname_sysctl_init+0x0/0x11 returned 0 after 18 usecs calling init_tracepoints+0x0/0x14 @ 1 initcall init_tracepoints+0x0/0x14 returned 0 after 2 usecs calling ftrace_nodyn_init+0x0/0x11 @ 1 initcall ftrace_nodyn_init+0x0/0x11 returned 0 after 1 usecs calling init_events+0x0/0x5d @ 1 initcall init_events+0x0/0x5d returned 0 after 7 usecs calling init_function_trace+0x0/0xf @ 1 initcall init_function_trace+0x0/0xf returned 0 after 7 usecs calling perf_event_sysfs_init+0x0/0x95 @ 1 initcall perf_event_sysfs_init+0x0/0x95 returned 0 after 255 usecs calling init_per_zone_wmark_min+0x0/0x65 @ 1 initcall init_per_zone_wmark_min+0x0/0x65 returned 0 after 40 usecs calling kswapd_init+0x0/0x1d @ 1 initcall kswapd_init+0x0/0x1d returned 0 after 56 usecs calling extfrag_debug_init+0x0/0x78 @ 1 initcall extfrag_debug_init+0x0/0x78 returned 0 after 15 usecs calling setup_vmstat+0x0/0xca @ 1 initcall setup_vmstat+0x0/0xca returned 0 after 9 usecs calling mm_sysfs_init+0x0/0x22 @ 1 initcall mm_sysfs_init+0x0/0x22 returned 0 after 5 usecs calling proc_vmalloc_init+0x0/0x2a @ 1 initcall proc_vmalloc_init+0x0/0x2a returned 0 after 2 usecs calling init_emergency_pool+0x0/0x79 @ 1 highmem bounce pool size: 64 pages initcall init_emergency_pool+0x0/0x79 returned 0 after 3089 usecs calling procswaps_init+0x0/0x27 @ 1 initcall procswaps_init+0x0/0x27 returned 0 after 3 usecs calling hugetlb_init+0x0/0x2a7 @ 1 HugeTLB registered 4 MB page size, pre-allocated 0 pages initcall hugetlb_init+0x0/0x2a7 returned 0 after 4948 usecs calling ksm_init+0x0/0x15c @ 1 initcall ksm_init+0x0/0x15c returned 0 after 40 usecs calling slab_proc_init+0x0/0x2a @ 1 initcall slab_proc_init+0x0/0x2a returned 0 after 6 usecs calling slab_sysfs_init+0x0/0xec @ 1 initcall slab_sysfs_init+0x0/0xec returned 0 after 4569 usecs calling hugepage_init+0x0/0x122 @ 1 initcall hugepage_init+0x0/0x122 returned 0 after 160 usecs calling fcntl_init+0x0/0x2f @ 1 initcall fcntl_init+0x0/0x2f returned 0 after 24 usecs calling proc_filesystems_init+0x0/0x27 @ 1 initcall proc_filesystems_init+0x0/0x27 returned 0 after 4 usecs calling fsnotify_mark_init+0x0/0x46 @ 1 initcall fsnotify_mark_init+0x0/0x46 returned 0 after 30 usecs calling dnotify_init+0x0/0x7c @ 1 initcall dnotify_init+0x0/0x7c returned 0 after 100 usecs calling inotify_user_setup+0x0/0x78 @ 1 initcall inotify_user_setup+0x0/0x78 returned 0 after 14 usecs calling fanotify_user_setup+0x0/0x5a @ 1 initcall fanotify_user_setup+0x0/0x5a returned 0 after 89 usecs calling aio_setup+0x0/0x85 @ 1 initcall aio_setup+0x0/0x85 returned 0 after 28 usecs calling proc_locks_init+0x0/0x27 @ 1 initcall proc_locks_init+0x0/0x27 returned 0 after 7 usecs calling init_mbcache+0x0/0x11 @ 1 initcall init_mbcache+0x0/0x11 returned 0 after 2 usecs calling dquot_init+0x0/0x111 @ 1 VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) initcall dquot_init+0x0/0x111 returned 0 after 7848 usecs calling init_v1_quota_format+0x0/0xf @ 1 initcall init_v1_quota_format+0x0/0xf returned 0 after 1 usecs calling init_v2_quota_format+0x0/0x1d @ 1 initcall init_v2_quota_format+0x0/0x1d returned 0 after 1 usecs calling quota_init+0x0/0x22 @ 1 initcall quota_init+0x0/0x22 returned 0 after 6 usecs calling proc_cmdline_init+0x0/0x27 @ 1 initcall proc_cmdline_init+0x0/0x27 returned 0 after 3 usecs calling proc_consoles_init+0x0/0x27 @ 1 initcall proc_consoles_init+0x0/0x27 returned 0 after 3 usecs calling proc_cpuinfo_init+0x0/0x27 @ 1 initcall proc_cpuinfo_init+0x0/0x27 returned 0 after 3 usecs calling proc_devices_init+0x0/0x27 @ 1 initcall proc_devices_init+0x0/0x27 returned 0 after 3 usecs calling proc_interrupts_init+0x0/0x27 @ 1 initcall proc_interrupts_init+0x0/0x27 returned 0 after 3 usecs calling proc_loadavg_init+0x0/0x27 @ 1 initcall proc_loadavg_init+0x0/0x27 returned 0 after 2 usecs calling proc_meminfo_init+0x0/0x27 @ 1 initcall proc_meminfo_init+0x0/0x27 returned 0 after 2 usecs calling proc_stat_init+0x0/0x27 @ 1 initcall proc_stat_init+0x0/0x27 returned 0 after 3 usecs calling proc_uptime_init+0x0/0x27 @ 1 initcall proc_uptime_init+0x0/0x27 returned 0 after 3 usecs calling proc_version_init+0x0/0x27 @ 1 initcall proc_version_init+0x0/0x27 returned 0 after 3 usecs calling proc_softirqs_init+0x0/0x27 @ 1 initcall proc_softirqs_init+0x0/0x27 returned 0 after 2 usecs calling proc_kcore_init+0x0/0xb4 @ 1 initcall proc_kcore_init+0x0/0xb4 returned 0 after 4 usecs calling proc_kmsg_init+0x0/0x2a @ 1 initcall proc_kmsg_init+0x0/0x2a returned 0 after 2 usecs calling proc_page_init+0x0/0x4a @ 1 initcall proc_page_init+0x0/0x4a returned 0 after 4 usecs calling configfs_init+0x0/0xa6 @ 1 initcall configfs_init+0x0/0xa6 returned 0 after 121 usecs calling init_devpts_fs+0x0/0x3d @ 1 initcall init_devpts_fs+0x0/0x3d returned 0 after 31 usecs calling init_dlm+0x0/0x88 @ 1 DLM (built May 4 2011 11:04:28) installed initcall init_dlm+0x0/0x88 returned 0 after 4073 usecs calling init_reiserfs_fs+0x0/0x5a @ 1 initcall init_reiserfs_fs+0x0/0x5a returned 0 after 82 usecs calling init_ext3_fs+0x0/0x6c @ 1 initcall init_ext3_fs+0x0/0x6c returned 0 after 163 usecs calling init_ext2_fs+0x0/0x6c @ 1 initcall init_ext2_fs+0x0/0x6c returned 0 after 103 usecs calling ext4_init_fs+0x0/0x1cd @ 1 initcall ext4_init_fs+0x0/0x1cd returned 0 after 512 usecs calling journal_init+0x0/0x97 @ 1 initcall journal_init+0x0/0x97 returned 0 after 252 usecs calling journal_init+0x0/0x103 @ 1 initcall journal_init+0x0/0x103 returned 0 after 116 usecs calling init_cramfs_fs+0x0/0x28 @ 1 initcall init_cramfs_fs+0x0/0x28 returned 0 after 10 usecs calling init_squashfs_fs+0x0/0x64 @ 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher initcall init_squashfs_fs+0x0/0x64 returned 0 after 4514 usecs calling init_ramfs_fs+0x0/0xf @ 1 initcall init_ramfs_fs+0x0/0xf returned 0 after 2 usecs calling init_hugetlbfs_fs+0x0/0x8b @ 1 initcall init_hugetlbfs_fs+0x0/0x8b returned 0 after 138 usecs calling init_coda+0x0/0x170 @ 1 initcall init_coda+0x0/0x170 returned 0 after 421 usecs calling init_minix_fs+0x0/0x5a @ 1 initcall init_minix_fs+0x0/0x5a returned 0 after 83 usecs calling init_fat_fs+0x0/0x4c @ 1 initcall init_fat_fs+0x0/0x4c returned 0 after 167 usecs calling init_vfat_fs+0x0/0xf @ 1 initcall init_vfat_fs+0x0/0xf returned 0 after 2 usecs calling init_msdos_fs+0x0/0xf @ 1 initcall init_msdos_fs+0x0/0xf returned 0 after 2 usecs calling init_bfs_fs+0x0/0x5a @ 1 initcall init_bfs_fs+0x0/0x5a returned 0 after 82 usecs calling init_iso9660_fs+0x0/0x6a @ 1 initcall init_iso9660_fs+0x0/0x6a returned 0 after 84 usecs calling init_hfsplus_fs+0x0/0x56 @ 1 initcall init_hfsplus_fs+0x0/0x56 returned 0 after 80 usecs calling init_hfs_fs+0x0/0x56 @ 1 initcall init_hfs_fs+0x0/0x56 returned 0 after 83 usecs calling ecryptfs_init+0x0/0x1cc @ 1 initcall ecryptfs_init+0x0/0x1cc returned 0 after 306 usecs calling vxfs_init+0x0/0x56 @ 1 initcall vxfs_init+0x0/0x56 returned 0 after 109 usecs calling init_nfs_fs+0x0/0x154 @ 1 Registering the id_resolver key type FS-Cache: Netfs 'nfs' registered for caching initcall init_nfs_fs+0x0/0x154 returned 0 after 7495 usecs calling nfs4filelayout_init+0x0/0x26 @ 1 nfs4filelayout_init: NFSv4 File Layout Driver Registering... initcall nfs4filelayout_init+0x0/0x26 returned 0 after 5273 usecs calling init_nfsd+0x0/0xd4 @ 1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). initcall init_nfsd+0x0/0xd4 returned 0 after 5160 usecs calling init_nlm+0x0/0x1c @ 1 initcall init_nlm+0x0/0x1c returned 0 after 15 usecs calling init_nls_cp437+0x0/0xf @ 1 initcall init_nls_cp437+0x0/0xf returned 0 after 1 usecs calling init_nls_cp850+0x0/0xf @ 1 initcall init_nls_cp850+0x0/0xf returned 0 after 1 usecs calling init_nls_cp852+0x0/0xf @ 1 initcall init_nls_cp852+0x0/0xf returned 0 after 1 usecs calling init_nls_cp860+0x0/0xf @ 1 initcall init_nls_cp860+0x0/0xf returned 0 after 1 usecs calling init_nls_cp864+0x0/0xf @ 1 initcall init_nls_cp864+0x0/0xf returned 0 after 1 usecs calling init_nls_cp866+0x0/0xf @ 1 initcall init_nls_cp866+0x0/0xf returned 0 after 1 usecs calling init_nls_cp932+0x0/0xf @ 1 initcall init_nls_cp932+0x0/0xf returned 0 after 1 usecs calling init_nls_euc_jp+0x0/0x39 @ 1 initcall init_nls_euc_jp+0x0/0x39 returned 0 after 2 usecs calling init_nls_cp936+0x0/0xf @ 1 initcall init_nls_cp936+0x0/0xf returned 0 after 1 usecs calling init_nls_iso8859_1+0x0/0xf @ 1 initcall init_nls_iso8859_1+0x0/0xf returned 0 after 1 usecs calling init_nls_iso8859_5+0x0/0xf @ 1 initcall init_nls_iso8859_5+0x0/0xf returned 0 after 1 usecs calling init_nls_iso8859_6+0x0/0xf @ 1 initcall init_nls_iso8859_6+0x0/0xf returned 0 after 1 usecs calling init_nls_iso8859_15+0x0/0xf @ 1 initcall init_nls_iso8859_15+0x0/0xf returned 0 after 1 usecs calling init_nls_koi8_r+0x0/0xf @ 1 initcall init_nls_koi8_r+0x0/0xf returned 0 after 1 usecs calling init_nls_utf8+0x0/0x1f @ 1 initcall init_nls_utf8+0x0/0x1f returned 0 after 1 usecs calling init_sysv_fs+0x0/0x43 @ 1 initcall init_sysv_fs+0x0/0x43 returned 0 after 86 usecs calling init_cifs+0x0/0x3ea @ 1 FS-Cache: Netfs 'cifs' registered for caching initcall init_cifs+0x0/0x3ea returned 0 after 4223 usecs calling init_ncp_fs+0x0/0x5a @ 1 initcall init_ncp_fs+0x0/0x5a returned 0 after 85 usecs calling init_hpfs_fs+0x0/0x5a @ 1 initcall init_hpfs_fs+0x0/0x5a returned 0 after 83 usecs calling init_ntfs_fs+0x0/0x1c9 @ 1 NTFS driver 2.1.30 [Flags: R/W]. initcall init_ntfs_fs+0x0/0x1c9 returned 0 after 3123 usecs calling init_ufs_fs+0x0/0x5a @ 1 initcall init_ufs_fs+0x0/0x5a returned 0 after 82 usecs calling init_efs_fs+0x0/0x66 @ 1 EFS: 1.0a - http://aeschi.ch.eu.org/efs/ initcall init_efs_fs+0x0/0x66 returned 0 after 3666 usecs calling init_affs_fs+0x0/0x5a @ 1 initcall init_affs_fs+0x0/0x5a returned 0 after 86 usecs calling init_romfs_fs+0x0/0x7c @ 1 ROMFS MTD (C) 2007 Red Hat, Inc. initcall init_romfs_fs+0x0/0x7c returned 0 after 2990 usecs calling init_qnx4_fs+0x0/0x68 @ 1 QNX4 filesystem 0.2.3 registered. initcall init_qnx4_fs+0x0/0x68 returned 0 after 3075 usecs calling init_autofs4_fs+0x0/0x1e @ 1 initcall init_autofs4_fs+0x0/0x1e returned 0 after 80 usecs calling init_adfs_fs+0x0/0x5a @ 1 initcall init_adfs_fs+0x0/0x5a returned 0 after 82 usecs calling fuse_init+0x0/0x123 @ 1 fuse init (API version 7.16) initcall fuse_init+0x0/0x123 returned 0 after 2818 usecs calling cuse_init+0x0/0x93 @ 1 initcall cuse_init+0x0/0x93 returned 0 after 127 usecs calling init_udf_fs+0x0/0x5a @ 1 initcall init_udf_fs+0x0/0x5a returned 0 after 82 usecs calling init_omfs_fs+0x0/0xf @ 1 initcall init_omfs_fs+0x0/0xf returned 0 after 3 usecs calling init_jfs_fs+0x0/0x1ad @ 1 JFS: nTxBlock = 7937, nTxLock = 63498 initcall init_jfs_fs+0x0/0x1ad returned 0 after 6557 usecs calling init_xfs_fs+0x0/0xce @ 1 SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem initcall init_xfs_fs+0x0/0xce returned 0 after 12280 usecs calling init_nilfs_fs+0x0/0xe1 @ 1 NILFS version 2 loaded initcall init_nilfs_fs+0x0/0xe1 returned 0 after 2346 usecs calling init_befs_fs+0x0/0x78 @ 1 BeFS version: 0.9.3 initcall init_befs_fs+0x0/0x78 returned 0 after 1887 usecs calling ocfs2_init+0x0/0x308 @ 1 OCFS2 1.5.0 initcall ocfs2_init+0x0/0x308 returned 0 after 1371 usecs calling ocfs2_stack_glue_init+0x0/0x7d @ 1 initcall ocfs2_stack_glue_init+0x0/0x7d returned 0 after 16 usecs calling o2cb_stack_init+0x0/0xf @ 1 ocfs2: Registered cluster interface o2cb initcall o2cb_stack_init+0x0/0xf returned 0 after 3579 usecs calling ocfs2_user_plugin_init+0x0/0x51 @ 1 ocfs2: Registered cluster interface user initcall ocfs2_user_plugin_init+0x0/0x51 returned 0 after 3656 usecs calling init_dlmfs_fs+0x0/0xd8 @ 1 OCFS2 DLMFS 1.5.0 OCFS2 User DLM kernel interface loaded initcall init_dlmfs_fs+0x0/0xd8 returned 0 after 5218 usecs calling init_o2nm+0x0/0x98 @ 1 OCFS2 Node Manager 1.5.0 initcall init_o2nm+0x0/0x98 returned 0 after 2349 usecs calling dlm_init+0x0/0x345 @ 1 OCFS2 DLM 1.5.0 initcall dlm_init+0x0/0x345 returned 0 after 1531 usecs calling init_btrfs_fs+0x0/0x9d @ 1 Btrfs loaded initcall init_btrfs_fs+0x0/0x9d returned 0 after 1651 usecs calling init_gfs2_fs+0x0/0x29c @ 1 GFS2 (built May 4 2011 11:04:41) installed initcall init_gfs2_fs+0x0/0x29c returned 0 after 4501 usecs calling init_exofs+0x0/0x5a @ 1 initcall init_exofs+0x0/0x5a returned 0 after 113 usecs calling init_ceph+0x0/0x119 @ 1 ceph: loaded (mds proto 32) initcall init_ceph+0x0/0x119 returned 0 after 2617 usecs calling init_pstore_fs+0x0/0xf @ 1 initcall init_pstore_fs+0x0/0xf returned 0 after 4 usecs calling ipc_init+0x0/0x20 @ 1 msgmni has been set to 1712 initcall ipc_init+0x0/0x20 returned 0 after 2491 usecs calling ipc_sysctl_init+0x0/0x11 @ 1 initcall ipc_sysctl_init+0x0/0x11 returned 0 after 21 usecs calling init_mqueue_fs+0x0/0x9f @ 1 initcall init_mqueue_fs+0x0/0x9f returned 0 after 134 usecs calling key_proc_init+0x0/0x61 @ 1 initcall key_proc_init+0x0/0x61 returned 0 after 6 usecs calling crypto_wq_init+0x0/0x38 @ 1 initcall crypto_wq_init+0x0/0x38 returned 0 after 37 usecs calling crypto_algapi_init+0x0/0xc @ 1 initcall crypto_algapi_init+0x0/0xc returned 0 after 9 usecs calling skcipher_module_init+0x0/0x28 @ 1 initcall skcipher_module_init+0x0/0x28 returned 0 after 1 usecs calling chainiv_module_init+0x0/0xf @ 1 initcall chainiv_module_init+0x0/0xf returned 0 after 2 usecs calling eseqiv_module_init+0x0/0xf @ 1 initcall eseqiv_module_init+0x0/0xf returned 0 after 1 usecs calling hmac_module_init+0x0/0xf @ 1 initcall hmac_module_init+0x0/0xf returned 0 after 2 usecs calling crypto_xcbc_module_init+0x0/0xf @ 1 initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 1 usecs calling crypto_null_mod_init+0x0/0x67 @ 1 initcall crypto_null_mod_init+0x0/0x67 returned 0 after 119 usecs calling md4_mod_init+0x0/0xf @ 1 initcall md4_mod_init+0x0/0xf returned 0 after 31 usecs calling md5_mod_init+0x0/0xf @ 1 initcall md5_mod_init+0x0/0xf returned 0 after 32 usecs calling sha1_generic_mod_init+0x0/0xf @ 1 initcall sha1_generic_mod_init+0x0/0xf returned 0 after 30 usecs calling sha256_generic_mod_init+0x0/0x33 @ 1 initcall sha256_generic_mod_init+0x0/0x33 returned 0 after 58 usecs calling sha512_generic_mod_init+0x0/0x33 @ 1 initcall sha512_generic_mod_init+0x0/0x33 returned 0 after 60 usecs calling wp512_mod_init+0x0/0x52 @ 1 initcall wp512_mod_init+0x0/0x52 returned 0 after 86 usecs calling tgr192_mod_init+0x0/0x52 @ 1 initcall tgr192_mod_init+0x0/0x52 returned 0 after 86 usecs calling crypto_ecb_module_init+0x0/0xf @ 1 initcall crypto_ecb_module_init+0x0/0xf returned 0 after 1 usecs calling crypto_cbc_module_init+0x0/0xf @ 1 initcall crypto_cbc_module_init+0x0/0xf returned 0 after 2 usecs calling crypto_pcbc_module_init+0x0/0xf @ 1 initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 2 usecs calling crypto_module_init+0x0/0xf @ 1 initcall crypto_module_init+0x0/0xf returned 0 after 1 usecs calling crypto_module_init+0x0/0xf @ 1 initcall crypto_module_init+0x0/0xf returned 0 after 1 usecs calling des_generic_mod_init+0x0/0x33 @ 1 initcall des_generic_mod_init+0x0/0x33 returned 0 after 60 usecs calling fcrypt_mod_init+0x0/0xf @ 1 initcall fcrypt_mod_init+0x0/0xf returned 0 after 30 usecs calling blowfish_mod_init+0x0/0xf @ 1 initcall blowfish_mod_init+0x0/0xf returned 0 after 30 usecs calling twofish_mod_init+0x0/0xf @ 1 initcall twofish_mod_init+0x0/0xf returned 0 after 30 usecs calling serpent_mod_init+0x0/0x33 @ 1 initcall serpent_mod_init+0x0/0x33 returned 0 after 75 usecs calling aes_init+0x0/0xf @ 1 initcall aes_init+0x0/0xf returned 0 after 31 usecs calling camellia_init+0x0/0xf @ 1 initcall camellia_init+0x0/0xf returned 0 after 46 usecs calling cast5_mod_init+0x0/0xf @ 1 initcall cast5_mod_init+0x0/0xf returned 0 after 31 usecs calling cast6_mod_init+0x0/0xf @ 1 initcall cast6_mod_init+0x0/0xf returned 0 after 31 usecs calling arc4_init+0x0/0xf @ 1 initcall arc4_init+0x0/0xf returned 0 after 31 usecs calling tea_mod_init+0x0/0x52 @ 1 initcall tea_mod_init+0x0/0x52 returned 0 after 87 usecs calling khazad_mod_init+0x0/0xf @ 1 initcall khazad_mod_init+0x0/0xf returned 0 after 31 usecs calling anubis_mod_init+0x0/0xf @ 1 initcall anubis_mod_init+0x0/0xf returned 0 after 32 usecs calling seed_init+0x0/0xf @ 1 initcall seed_init+0x0/0xf returned 0 after 32 usecs calling deflate_mod_init+0x0/0xf @ 1 initcall deflate_mod_init+0x0/0xf returned 0 after 31 usecs calling michael_mic_init+0x0/0xf @ 1 initcall michael_mic_init+0x0/0xf returned 0 after 31 usecs calling crc32c_mod_init+0x0/0xf @ 1 initcall crc32c_mod_init+0x0/0xf returned 0 after 32 usecs calling crypto_authenc_module_init+0x0/0xf @ 1 initcall crypto_authenc_module_init+0x0/0xf returned 0 after 2 usecs calling crypto_authenc_esn_module_init+0x0/0xf @ 1 initcall crypto_authenc_esn_module_init+0x0/0xf returned 0 after 7 usecs calling lzo_mod_init+0x0/0xf @ 1 initcall lzo_mod_init+0x0/0xf returned 0 after 31 usecs calling krng_mod_init+0x0/0xf @ 1 initcall krng_mod_init+0x0/0xf returned 0 after 32 usecs calling async_tx_init+0x0/0x19 @ 1 async_tx: api initialized (async) initcall async_tx_init+0x0/0x19 returned 0 after 2998 usecs calling async_pq_init+0x0/0x46 @ 1 initcall async_pq_init+0x0/0x46 returned 0 after 2 usecs calling proc_genhd_init+0x0/0x44 @ 1 initcall proc_genhd_init+0x0/0x44 returned 0 after 6 usecs calling bsg_init+0x0/0x117 @ 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) initcall bsg_init+0x0/0x117 returned 0 after 6024 usecs calling noop_init+0x0/0x11 @ 1 io scheduler noop registered initcall noop_init+0x0/0x11 returned 0 after 2566 usecs calling deadline_init+0x0/0x11 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x11 returned 0 after 2902 usecs calling cfq_init+0x0/0xa8 @ 1 io scheduler cfq registered (default) initcall cfq_init+0x0/0xa8 returned 0 after 3363 usecs calling libcrc32c_mod_init+0x0/0x26 @ 1 initcall libcrc32c_mod_init+0x0/0x26 returned 0 after 5 usecs calling percpu_counter_startup+0x0/0x16 @ 1 initcall percpu_counter_startup+0x0/0x16 returned 0 after 3 usecs calling audit_classes_init+0x0/0x4f @ 1 initcall audit_classes_init+0x0/0x4f returned 0 after 6 usecs calling lnw_gpio_init+0x0/0x3a @ 1 initcall lnw_gpio_init+0x0/0x3a returned 0 after 129 usecs calling timbgpio_init+0x0/0xf @ 1 initcall timbgpio_init+0x0/0xf returned 0 after 46 usecs calling ucb1400_gpio_init+0x0/0xf @ 1 initcall ucb1400_gpio_init+0x0/0xf returned 0 after 48 usecs calling pci_proc_init+0x0/0x64 @ 1 initcall pci_proc_init+0x0/0x64 returned 0 after 48 usecs calling pcie_portdrv_init+0x0/0x6f @ 1 pcieport 0000:00:0b.0: setting latency timer to 64 pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X pcieport 0000:00:0c.0: setting latency timer to 64 pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X pcieport 0000:00:0d.0: setting latency timer to 64 pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X pcieport 0000:00:0e.0: setting latency timer to 64 pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X initcall pcie_portdrv_init+0x0/0x6f returned 0 after 33580 usecs calling aer_service_init+0x0/0x2c @ 1 initcall aer_service_init+0x0/0x2c returned 0 after 46 usecs calling aer_inject_init+0x0/0xf @ 1 initcall aer_inject_init+0x0/0xf returned 0 after 83 usecs calling pcie_pme_service_init+0x0/0xf @ 1 initcall pcie_pme_service_init+0x0/0xf returned 0 after 46 usecs calling ioapic_init+0x0/0x16 @ 1 initcall ioapic_init+0x0/0x16 returned 0 after 69 usecs calling pci_hotplug_init+0x0/0x4d @ 1 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 initcall pci_hotplug_init+0x0/0x4d returned 0 after 4173 usecs calling cpqhpc_init+0x0/0x66 @ 1 cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8 initcall cpqhpc_init+0x0/0x66 returned 0 after 5339 usecs calling ibmphp_init+0x0/0x611 @ 1 ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6 initcall ibmphp_init+0x0/0x611 returned -19 after 4983 usecs calling pcied_init+0x0/0xf1 @ 1 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 initcall pcied_init+0x0/0xf1 returned 0 after 5343 usecs calling zt5550_init+0x0/0x79 @ 1 cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 initcall zt5550_init+0x0/0x79 returned 0 after 5423 usecs calling cpcihp_generic_init+0x0/0x41b @ 1 cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 cpcihp_generic: not configured, disabling. initcall cpcihp_generic_init+0x0/0x41b returned -22 after 10038 usecs initcall cpcihp_generic_init+0x0/0x41b returned with error code -22 calling shpcd_init+0x0/0xd8 @ 1 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 initcall shpcd_init+0x0/0xd8 returned 0 after 5346 usecs calling acpiphp_init+0x0/0x5a @ 1 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 initcall acpiphp_init+0x0/0x5a returned -19 after 5454 usecs calling ibm_acpiphp_init+0x0/0x15f @ 1 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed initcall ibm_acpiphp_init+0x0/0x15f returned -19 after 7091 usecs calling genericbl_init+0x0/0xf @ 1 initcall genericbl_init+0x0/0xf returned 0 after 51 usecs calling display_class_init+0x0/0x6b @ 1 initcall display_class_init+0x0/0x6b returned 0 after 47 usecs calling arcfb_init+0x0/0x62 @ 1 initcall arcfb_init+0x0/0x62 returned -6 after 1 usecs initcall arcfb_init+0x0/0x62 returned with error code -6 calling cyber2000fb_init+0x0/0xa9 @ 1 initcall cyber2000fb_init+0x0/0xa9 returned 0 after 73 usecs calling pm2fb_init+0x0/0x127 @ 1 initcall pm2fb_init+0x0/0x127 returned 0 after 65 usecs calling pm3fb_init+0x0/0xe4 @ 1 initcall pm3fb_init+0x0/0xe4 returned 0 after 65 usecs calling matroxfb_init+0x0/0x88d @ 1 initcall matroxfb_init+0x0/0x88d returned 0 after 67 usecs calling matroxfb_crtc2_init+0x0/0x2d @ 1 initcall matroxfb_crtc2_init+0x0/0x2d returned 0 after 2 usecs calling i2c_matroxfb_init+0x0/0x29 @ 1 initcall i2c_matroxfb_init+0x0/0x29 returned 0 after 1 usecs calling matroxfb_maven_init+0x0/0x11 @ 1 initcall matroxfb_maven_init+0x0/0x11 returned 0 after 49 usecs calling rivafb_init+0x0/0x17a @ 1 initcall rivafb_init+0x0/0x17a returned 0 after 71 usecs calling nvidiafb_init+0x0/0x26e @ 1 initcall nvidiafb_init+0x0/0x26e returned 0 after 66 usecs calling atyfb_init+0x0/0x1da @ 1 initcall atyfb_init+0x0/0x1da returned 0 after 70 usecs calling aty128fb_init+0x0/0x114 @ 1 initcall aty128fb_init+0x0/0x114 returned 0 after 70 usecs calling sisfb_init+0x0/0x71d @ 1 initcall sisfb_init+0x0/0x71d returned 0 after 68 usecs calling via_core_init+0x0/0x29 @ 1 VIA Graphics Integration Chipset framebuffer 2.4 initializing initcall via_core_init+0x0/0x29 returned 0 after 5528 usecs calling kyrofb_init+0x0/0xc3 @ 1 initcall kyrofb_init+0x0/0xc3 returned 0 after 66 usecs calling savagefb_init+0x0/0x58 @ 1 initcall savagefb_init+0x0/0x58 returned 0 after 68 usecs calling gx1fb_init+0x0/0x100 @ 1 initcall gx1fb_init+0x0/0x100 returned 0 after 68 usecs calling gxfb_init+0x0/0x64 @ 1 initcall gxfb_init+0x0/0x64 returned 0 after 78 usecs calling lxfb_init+0x0/0xc3 @ 1 initcall lxfb_init+0x0/0xc3 returned 0 after 67 usecs calling neofb_init+0x0/0x12a @ 1 initcall neofb_init+0x0/0x12a returned 0 after 67 usecs calling tdfxfb_init+0x0/0x103 @ 1 initcall tdfxfb_init+0x0/0x103 returned 0 after 66 usecs calling imsttfb_init+0x0/0xd5 @ 1 initcall imsttfb_init+0x0/0xd5 returned 0 after 66 usecs calling vt8623fb_init+0x0/0x47 @ 1 initcall vt8623fb_init+0x0/0x47 returned 0 after 66 usecs calling tridentfb_init+0x0/0x1d6 @ 1 initcall tridentfb_init+0x0/0x1d6 returned 0 after 68 usecs calling vmlfb_init+0x0/0x80 @ 1 vmlfb: initializing initcall vmlfb_init+0x0/0x80 returned 0 after 1858 usecs calling cr_pll_init+0x0/0xc9 @ 1 Could not find Carillo Ranch MCH device. initcall cr_pll_init+0x0/0xc9 returned -19 after 3590 usecs calling s3fb_init+0x0/0xbf @ 1 initcall s3fb_init+0x0/0xbf returned 0 after 66 usecs calling arkfb_init+0x0/0x47 @ 1 initcall arkfb_init+0x0/0x47 returned 0 after 64 usecs calling hecubafb_init+0x0/0xf @ 1 initcall hecubafb_init+0x0/0xf returned 0 after 48 usecs calling n411_init+0x0/0x94 @ 1 no IO addresses supplied initcall n411_init+0x0/0x94 returned -22 after 2226 usecs initcall n411_init+0x0/0x94 returned with error code -22 calling hgafb_init+0x0/0x7d @ 1 hgafb: HGA card not detected. hgafb: probe of hgafb.0 failed with error -22 initcall hgafb_init+0x0/0x7d returned 0 after 6788 usecs calling sstfb_init+0x0/0x18b @ 1 initcall sstfb_init+0x0/0x18b returned 0 after 85 usecs calling metronomefb_init+0x0/0xf @ 1 initcall metronomefb_init+0x0/0xf returned 0 after 47 usecs calling broadsheetfb_init+0x0/0xf @ 1 initcall broadsheetfb_init+0x0/0xf returned 0 after 49 usecs calling s1d13xxxfb_init+0x0/0x26 @ 1 initcall s1d13xxxfb_init+0x0/0x26 returned 0 after 48 usecs calling carminefb_init+0x0/0x33 @ 1 initcall carminefb_init+0x0/0x33 returned 0 after 68 usecs calling mb862xxfb_init+0x0/0x1b @ 1 initcall mb862xxfb_init+0x0/0x1b returned 0 after 69 usecs calling uvesafb_init+0x0/0x35b @ 1 uvesafb: failed to execute /sbin/v86d uvesafb: make sure that the v86d helper is installed and executable uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) uvesafb: vbe_init() failed with -22 uvesafb: probe of uvesafb.0 failed with error -22 initcall uvesafb_init+0x0/0x35b returned 0 after 22069 usecs calling efifb_init+0x0/0x1b2 @ 1 initcall efifb_init+0x0/0x1b2 returned -19 after 18 usecs calling intel_idle_init+0x0/0x361 @ 1 initcall intel_idle_init+0x0/0x361 returned -19 after 1 usecs calling acpi_reserve_resources+0x0/0xc8 @ 1 initcall acpi_reserve_resources+0x0/0xc8 returned 0 after 6 usecs calling irqrouter_init_ops+0x0/0x23 @ 1 initcall irqrouter_init_ops+0x0/0x23 returned 0 after 2 usecs calling acpi_ac_init+0x0/0x44 @ 1 initcall acpi_ac_init+0x0/0x44 returned 0 after 82 usecs calling acpi_button_init+0x0/0xf @ 1 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] initcall acpi_button_init+0x0/0xf returned 0 after 17622 usecs calling acpi_fan_init+0x0/0x15 @ 1 ACPI: Fan [FAN] (on) initcall acpi_fan_init+0x0/0x15 returned 0 after 2018 usecs calling acpi_video_init+0x0/0x6b @ 1 initcall acpi_video_init+0x0/0x6b returned 0 after 75 usecs calling acpi_pci_slot_init+0x0/0x1b @ 1 initcall acpi_pci_slot_init+0x0/0x1b returned 0 after 288 usecs calling acpi_processor_init+0x0/0xd0 @ 1 ACPI: acpi_idle registered with cpuidle initcall acpi_processor_init+0x0/0xd0 returned 0 after 3733 usecs calling acpi_container_init+0x0/0x4d @ 1 initcall acpi_container_init+0x0/0x4d returned 0 after 2437 usecs calling acpi_thermal_init+0x0/0x3c @ 1 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (40 C) initcall acpi_thermal_init+0x0/0x3c returned 0 after 7664 usecs calling acpi_battery_init+0x0/0x13 @ 1 initcall acpi_battery_init+0x0/0x13 returned 0 after 4 usecs calling 1_acpi_battery_init_async+0x0/0x34 @ 5 initcall 1_acpi_battery_init_async+0x0/0x34 returned 0 after 97 usecs calling acpi_smb_hc_init+0x0/0x15 @ 1 initcall acpi_smb_hc_init+0x0/0x15 returned 0 after 67 usecs calling acpi_sbs_init+0x0/0x54 @ 1 initcall acpi_sbs_init+0x0/0x54 returned 0 after 55 usecs calling acpi_hed_init+0x0/0x23 @ 1 initcall acpi_hed_init+0x0/0x23 returned 0 after 57 usecs calling acpi_pad_init+0x0/0xe9 @ 1 initcall acpi_pad_init+0x0/0xe9 returned -22 after 1 usecs initcall acpi_pad_init+0x0/0xe9 returned with error code -22 calling erst_init+0x0/0x27d @ 1 ERST: Table is not found! initcall erst_init+0x0/0x27d returned 0 after 2309 usecs calling pnpbios_thread_init+0x0/0x5e @ 1 initcall pnpbios_thread_init+0x0/0x5e returned 0 after 1 usecs calling isapnp_init+0x0/0x5f5 @ 1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found initcall isapnp_init+0x0/0x5f5 returned 0 after 353213 usecs calling pty_init+0x0/0x39d @ 1 initcall pty_init+0x0/0x39d returned 0 after 43144 usecs calling sysrq_init+0x0/0x6a @ 1 initcall sysrq_init+0x0/0x6a returned 0 after 15 usecs calling serial8250_init+0x0/0x154 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled async_waiting @ 1 async_continuing @ 1 after 2 usec async_waiting @ 1 async_continuing @ 1 after 1 usec ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A initcall serial8250_init+0x0/0x154 returned 0 after 299763 usecs calling serial8250_pnp_init+0x0/0xf @ 1 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A initcall serial8250_pnp_init+0x0/0xf returned 0 after 30870 usecs calling serial8250_pci_init+0x0/0x16 @ 1 initcall serial8250_pci_init+0x0/0x16 returned 0 after 100 usecs calling rand_initialize+0x0/0x2a @ 1 initcall rand_initialize+0x0/0x2a returned 0 after 48 usecs calling ttyprintk_init+0x0/0x128 @ 1 initcall ttyprintk_init+0x0/0x128 returned 0 after 143 usecs calling init+0x0/0x9c @ 1 initcall init+0x0/0x9c returned 0 after 109 usecs calling lp_init_module+0x0/0x212 @ 1 lp: driver loaded but no devices found initcall lp_init_module+0x0/0x212 returned 0 after 3529 usecs calling hpet_init+0x0/0x57 @ 1 initcall hpet_init+0x0/0x57 returned 0 after 230 usecs calling nvram_init+0x0/0x7e @ 1 Non-volatile memory driver v1.3 initcall nvram_init+0x0/0x7e returned 0 after 2913 usecs calling i8k_init+0x0/0x1d2 @ 1 initcall i8k_init+0x0/0x1d2 returned -19 after 5 usecs calling agp_init+0x0/0x2f @ 1 Linux agpgart interface v0.103 initcall agp_init+0x0/0x2f returned 0 after 2734 usecs calling agp_ali_init+0x0/0x24 @ 1 initcall agp_ali_init+0x0/0x24 returned 0 after 81 usecs calling agp_ati_init+0x0/0x24 @ 1 initcall agp_ati_init+0x0/0x24 returned 0 after 70 usecs calling agp_amdk7_init+0x0/0x24 @ 1 initcall agp_amdk7_init+0x0/0x24 returned 0 after 69 usecs calling agp_amd64_mod_init+0x0/0xa @ 1 initcall agp_amd64_mod_init+0x0/0xa returned -19 after 259 usecs calling agp_efficeon_init+0x0/0x39 @ 1 initcall agp_efficeon_init+0x0/0x39 returned 0 after 72 usecs calling agp_intel_init+0x0/0x24 @ 1 initcall agp_intel_init+0x0/0x24 returned 0 after 72 usecs calling agp_nvidia_init+0x0/0x24 @ 1 initcall agp_nvidia_init+0x0/0x24 returned 0 after 69 usecs calling agp_sis_init+0x0/0x24 @ 1 initcall agp_sis_init+0x0/0x24 returned 0 after 70 usecs calling agp_serverworks_init+0x0/0x24 @ 1 initcall agp_serverworks_init+0x0/0x24 returned 0 after 69 usecs calling agp_via_init+0x0/0x24 @ 1 initcall agp_via_init+0x0/0x24 returned 0 after 71 usecs calling drm_core_init+0x0/0x12b @ 1 [drm] Initialized drm 1.1.0 20060810 initcall drm_core_init+0x0/0x12b returned 0 after 3313 usecs calling ttm_init+0x0/0x64 @ 1 initcall ttm_init+0x0/0x64 returned 0 after 56 usecs calling tdfx_init+0x0/0x14 @ 1 initcall tdfx_init+0x0/0x14 returned 0 after 14 usecs calling r128_init+0x0/0x1e @ 1 initcall r128_init+0x0/0x1e returned 0 after 70 usecs calling radeon_init+0x0/0xdb @ 1 [drm] radeon defaulting to userspace modesetting. ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 IOAPIC[0]: Set routing entry (2-18 -> 0x59 -> IRQ 18 Mode:1 Active:1) pci 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 pci 0000:01:00.0: setting latency timer to 64 [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0 initcall radeon_init+0x0/0xdb returned 0 after 42047 usecs calling mga_init+0x0/0x1e @ 1 initcall mga_init+0x0/0x1e returned 0 after 8 usecs calling i810_init+0x0/0x43 @ 1 drm/i810 does not support SMP initcall i810_init+0x0/0x43 returned -22 after 2649 usecs initcall i810_init+0x0/0x43 returned with error code -22 calling savage_init+0x0/0x1e @ 1 initcall savage_init+0x0/0x1e returned 0 after 43 usecs calling via_init+0x0/0x23 @ 1 initcall via_init+0x0/0x23 returned 0 after 20 usecs calling cn_proc_init+0x0/0x31 @ 1 initcall cn_proc_init+0x0/0x31 returned 0 after 3 usecs calling i810fb_init+0x0/0x354 @ 1 initcall i810fb_init+0x0/0x354 returned 0 after 77 usecs calling parport_default_proc_register+0x0/0x16 @ 1 initcall parport_default_proc_register+0x0/0x16 returned 0 after 13 usecs calling parport_pc_init+0x0/0x327 @ 1 IT8712 SuperIO detected. parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). lp0: console ready initcall parport_pc_init+0x0/0x327 returned 0 after 100307 usecs calling parport_serial_init+0x0/0x16 @ 1 initcall parport_serial_init+0x0/0x16 returned 0 after 72 usecs calling init_parport_cs+0x0/0xf @ 1 initcall init_parport_cs+0x0/0xf returned 0 after 50 usecs calling parport_ax88796_init+0x0/0xf @ 1 initcall parport_ax88796_init+0x0/0xf returned 0 after 49 usecs calling isa_bus_init+0x0/0x33 @ 1 initcall isa_bus_init+0x0/0x33 returned 0 after 63 usecs calling topology_sysfs_init+0x0/0x56 @ 1 initcall topology_sysfs_init+0x0/0x56 returned 0 after 13 usecs calling floppy_init+0x0/0xcd4 @ 1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 initcall floppy_init+0x0/0xcd4 returned 0 after 20440 usecs calling brd_init+0x0/0x15a @ 1 brd: module loaded initcall brd_init+0x0/0x15a returned 0 after 4294 usecs calling loop_init+0x0/0x172 @ 1 loop: module loaded initcall loop_init+0x0/0x172 returned 0 after 3115 usecs calling xd_init+0x0/0x4b4 @ 1 initcall xd_init+0x0/0x4b4 returned -19 after 82 usecs calling cpqarray_init+0x0/0x216 @ 1 Compaq SMART2 Driver (v 2.6.0) initcall cpqarray_init+0x0/0x216 returned -19 after 2873 usecs calling cciss_init+0x0/0x96 @ 1 HP CISS Driver (v 3.6.26) initcall cciss_init+0x0/0x96 returned 0 after 2479 usecs calling DAC960_init_module+0x0/0x47 @ 1 initcall DAC960_init_module+0x0/0x47 returned 0 after 203 usecs calling pkt_init+0x0/0x179 @ 1 initcall pkt_init+0x0/0x179 returned 0 after 157 usecs calling osdblk_init+0x0/0x84 @ 1 initcall osdblk_init+0x0/0x84 returned 0 after 49 usecs calling mm_init+0x0/0x160 @ 1 MM: desc_per_page = 128 initcall mm_init+0x0/0x160 returned 0 after 2224 usecs calling nbd_init+0x0/0x250 @ 1 nbd: registered device at major 43 initcall nbd_init+0x0/0x250 returned 0 after 5872 usecs calling init_cryptoloop+0x0/0x27 @ 1 initcall init_cryptoloop+0x0/0x27 returned 0 after 2 usecs calling init+0x0/0x24 @ 1 initcall init+0x0/0x24 returned 0 after 51 usecs calling carm_init+0x0/0x16 @ 1 initcall carm_init+0x0/0x16 returned 0 after 64 usecs calling ub_init+0x0/0x82 @ 1 usbcore: registered new interface driver ub initcall ub_init+0x0/0x82 returned 0 after 3918 usecs calling drbd_init+0x0/0x30d @ 1 drbd: initialized. Version: 8.3.10 (api:88/proto:86-96) drbd: built-in drbd: registered as block device major 147 drbd: minor_table @ 0xf65b2600 initcall drbd_init+0x0/0x30d returned 0 after 13229 usecs calling rbd_init+0x0/0x4b @ 1 rbd: loaded rbd (rados block device) initcall rbd_init+0x0/0x4b returned 0 after 3325 usecs calling ibmasm_init+0x0/0x61 @ 1 ibmasm: IBM ASM Service Processor Driver version 1.0 loaded initcall ibmasm_init+0x0/0x61 returned 0 after 5286 usecs calling ics932s401_init+0x0/0x11 @ 1 initcall ics932s401_init+0x0/0x11 returned 0 after 49 usecs calling tifm_7xx1_init+0x0/0x16 @ 1 initcall tifm_7xx1_init+0x0/0x16 returned 0 after 60 usecs calling phantom_init+0x0/0xe8 @ 1 Phantom Linux Driver, version n0.9.8, init OK initcall phantom_init+0x0/0xe8 returned 0 after 4115 usecs calling ioc4_init+0x0/0x16 @ 1 initcall ioc4_init+0x0/0x16 returned 0 after 73 usecs calling enclosure_init+0x0/0x14 @ 1 initcall enclosure_init+0x0/0x14 returned 0 after 45 usecs calling ilo_init+0x0/0x82 @ 1 initcall ilo_init+0x0/0x82 returned 0 after 121 usecs calling isl29003_init+0x0/0x11 @ 1 i2c-core: driver [isl29003] using legacy suspend method i2c-core: driver [isl29003] using legacy resume method initcall isl29003_init+0x0/0x11 returned 0 after 9674 usecs calling sensor_isl29020_init+0x0/0x11 @ 1 initcall sensor_isl29020_init+0x0/0x11 returned 0 after 46 usecs calling c2port_init+0x0/0x48 @ 1 Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti initcall c2port_init+0x0/0x48 returned 0 after 5837 usecs calling duramar2150_c2port_init+0x0/0x6a @ 1 c2port c2port0: C2 port uc added c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) initcall duramar2150_c2port_init+0x0/0x6a returned 0 after 9106 usecs calling at24_init+0x0/0x45 @ 1 initcall at24_init+0x0/0x45 returned 0 after 49 usecs calling at25_init+0x0/0xf @ 1 initcall at25_init+0x0/0xf returned 0 after 53 usecs calling eeprom_init+0x0/0x11 @ 1 initcall eeprom_init+0x0/0x11 returned 0 after 49 usecs calling max6875_init+0x0/0x11 @ 1 initcall max6875_init+0x0/0x11 returned 0 after 46 usecs calling cb710_init_module+0x0/0x16 @ 1 initcall cb710_init_module+0x0/0x16 returned 0 after 75 usecs calling htcpld_core_init+0x0/0x24 @ 1 initcall htcpld_core_init+0x0/0x24 returned -19 after 139 usecs calling wm8994_i2c_init+0x0/0x30 @ 1 initcall wm8994_i2c_init+0x0/0x30 returned 0 after 49 usecs calling twl4030_codec_init+0x0/0x14 @ 1 initcall twl4030_codec_init+0x0/0x14 returned 0 after 48 usecs calling timberdale_init+0x0/0x47 @ 1 Driver for timberdale has been successfully registered. initcall timberdale_init+0x0/0x47 returned 0 after 4922 usecs calling adp5520_init+0x0/0x11 @ 1 initcall adp5520_init+0x0/0x11 returned 0 after 47 usecs calling mac_hid_init+0x0/0x1c @ 1 initcall mac_hid_init+0x0/0x1c returned 0 after 19 usecs calling scsi_tgt_init+0x0/0x87 @ 1 initcall scsi_tgt_init+0x0/0x87 returned 0 after 288 usecs calling raid_init+0x0/0xf @ 1 initcall raid_init+0x0/0xf returned 0 after 51 usecs calling spi_transport_init+0x0/0x7c @ 1 initcall spi_transport_init+0x0/0x7c returned 0 after 90 usecs calling fc_transport_init+0x0/0x71 @ 1 initcall fc_transport_init+0x0/0x71 returned 0 after 171 usecs calling iscsi_transport_init+0x0/0x13a @ 1 Loading iSCSI transport class v2.0-870. initcall iscsi_transport_init+0x0/0x13a returned 0 after 3755 usecs calling sas_transport_init+0x0/0x9f @ 1 initcall sas_transport_init+0x0/0x9f returned 0 after 285 usecs calling sas_class_init+0x0/0x35 @ 1 initcall sas_class_init+0x0/0x35 returned 0 after 44 usecs calling scsi_dh_init+0x0/0x4a @ 1 initcall scsi_dh_init+0x0/0x4a returned 0 after 3 usecs calling rdac_init+0x0/0x69 @ 1 rdac: device handler registered initcall rdac_init+0x0/0x69 returned 0 after 2864 usecs calling hp_sw_init+0x0/0xf @ 1 hp_sw: device handler registered initcall hp_sw_init+0x0/0xf returned 0 after 2910 usecs calling clariion_init+0x0/0x32 @ 1 emc: device handler registered initcall clariion_init+0x0/0x32 returned 0 after 2734 usecs calling alua_init+0x0/0x32 @ 1 alua: device handler registered initcall alua_init+0x0/0x32 returned 0 after 2827 usecs calling libfc_init+0x0/0x37 @ 1 initcall libfc_init+0x0/0x37 returned 0 after 98 usecs calling fcoe_init+0x0/0x174 @ 1 initcall fcoe_init+0x0/0x174 returned 0 after 63 usecs calling libfcoe_init+0x0/0x11 @ 1 initcall libfcoe_init+0x0/0x11 returned 0 after 4 usecs calling fnic_init_module+0x0/0x1c6 @ 1 fnic: Cisco FCoE HBA Driver, ver 1.5.0.1 initcall fnic_init_module+0x0/0x1c6 returned 0 after 3882 usecs calling bnx2fc_mod_init+0x0/0x224 @ 1 bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.1 (Mar 17, 2011) initcall bnx2fc_mod_init+0x0/0x224 returned 0 after 6202 usecs calling iscsi_sw_tcp_init+0x0/0x43 @ 1 iscsi: registered transport (tcp) initcall iscsi_sw_tcp_init+0x0/0x43 returned 0 after 3055 usecs calling NCR_700_init+0x0/0x1c @ 1 initcall NCR_700_init+0x0/0x1c returned 0 after 2 usecs calling sim710_init+0x0/0x1b @ 1 initcall sim710_init+0x0/0x1b returned 0 after 47 usecs calling advansys_init+0x0/0x78 @ 1 initcall advansys_init+0x0/0x78 returned 0 after 1432 usecs calling BusLogic_init+0x0/0x1d21 @ 1 initcall BusLogic_init+0x0/0x1d21 returned 0 after 40 usecs calling adpt_init+0x0/0xd93 @ 1 Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... initcall adpt_init+0x0/0xd93 returned -19 after 7845 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 12 usecs calling arcmsr_module_init+0x0/0x1b @ 1 initcall arcmsr_module_init+0x0/0x1b returned 0 after 62 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 32 usecs calling aha152x_init+0x0/0x5d5 @ 1 initcall aha152x_init+0x0/0x5d5 returned -19 after 48 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 3344351 usecs calling aha1740_init+0x0/0xf @ 1 initcall aha1740_init+0x0/0xf returned 0 after 52 usecs calling ahc_linux_init+0x0/0x5f @ 1 initcall ahc_linux_init+0x0/0x5f returned 0 after 138 usecs calling ahd_linux_init+0x0/0x6c @ 1 initcall ahd_linux_init+0x0/0x6c returned 0 after 71 usecs calling aac_init+0x0/0x76 @ 1 Adaptec aacraid driver 1.1-7[28000]-ms initcall aac_init+0x0/0x76 returned 0 after 3474 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 143 usecs calling aic94xx_init+0x0/0x126 @ 1 aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded initcall aic94xx_init+0x0/0x126 returned 0 after 5465 usecs calling pm8001_init+0x0/0x81 @ 1 initcall pm8001_init+0x0/0x81 returned 0 after 65 usecs calling ips_module_init+0x0/0x158 @ 1 initcall ips_module_init+0x0/0x158 returned -19 after 106 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 2 usecs calling init_this_scsi_driver+0x0/0xce @ 1 scsi: Detection failed (no card) initcall init_this_scsi_driver+0x0/0xce returned -19 after 3788 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 5 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 2 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 2 usecs calling init_this_scsi_driver+0x0/0xce @ 1 NCR53c406a: no available ports found initcall init_this_scsi_driver+0x0/0xce returned -19 after 3265 usecs calling NCR_D700_init+0x0/0xf @ 1 initcall NCR_D700_init+0x0/0xf returned 0 after 1 usecs calling NCR_Q720_init+0x0/0x28 @ 1 initcall NCR_Q720_init+0x0/0x28 returned 0 after 2 usecs calling init_this_scsi_driver+0x0/0xce @ 1 sym53c416.c: Version 1.0.0-ac initcall init_this_scsi_driver+0x0/0xce returned -19 after 2661 usecs calling qlogicfas408_init+0x0/0x7 @ 1 initcall qlogicfas408_init+0x0/0x7 returned 0 after 1 usecs calling qlogicfas_init+0x0/0x22e @ 1 qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options initcall qlogicfas_init+0x0/0x22e returned -19 after 8236 usecs calling qla1280_init+0x0/0x16 @ 1 initcall qla1280_init+0x0/0x16 returned 0 after 63 usecs calling qla2x00_module_init+0x0/0x144 @ 1 QLogic Fibre Channel HBA Driver: 8.03.07.00 initcall qla2x00_module_init+0x0/0x144 returned 0 after 3921 usecs calling qla4xxx_module_init+0x0/0xcc @ 1 iscsi: registered transport (qla4xxx) QLogic iSCSI HBA Driver initcall qla4xxx_module_init+0x0/0xcc returned 0 after 5642 usecs calling lpfc_init+0x0/0xaf @ 1 Emulex LightPulse Fibre Channel SCSI driver 8.3.22 Copyright(c) 2004-2009 Emulex. All rights reserved. initcall lpfc_init+0x0/0xaf returned 0 after 9090 usecs calling bfad_init+0x0/0xa1 @ 1 Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.3 initcall bfad_init+0x0/0xa1 returned 0 after 4490 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 9 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 4 usecs calling dmx3191d_init+0x0/0x16 @ 1 initcall dmx3191d_init+0x0/0x16 returned 0 after 77 usecs calling hpsa_init+0x0/0x16 @ 1 initcall hpsa_init+0x0/0x16 returned 0 after 63 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 3 usecs calling sym2_init+0x0/0xde @ 1 initcall sym2_init+0x0/0xde returned 0 after 63 usecs calling init_this_scsi_driver+0x0/0xce @ 1 Failed initialization of WD-7000 SCSI card! initcall init_this_scsi_driver+0x0/0xce returned -19 after 25126 usecs calling ibmmca_init+0x0/0x14 @ 1 initcall ibmmca_init+0x0/0x14 returned 0 after 2 usecs calling init_this_scsi_driver+0x0/0xce @ 1 initcall init_this_scsi_driver+0x0/0xce returned -19 after 267369 usecs calling dc395x_module_init+0x0/0x16 @ 1 initcall dc395x_module_init+0x0/0x16 returned 0 after 73 usecs calling dc390_module_init+0x0/0x8d @ 1 DC390: clustering now enabled by default. If you get problems load with "disable_clustering=1" and report to maintainers initcall dc390_module_init+0x0/0x8d returned 0 after 11125 usecs calling megaraid_init+0x0/0xae @ 1 initcall megaraid_init+0x0/0xae returned 0 after 76 usecs calling mraid_mm_init+0x0/0x80 @ 1 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) initcall mraid_mm_init+0x0/0x80 returned 0 after 6015 usecs calling megaraid_init+0x0/0x93 @ 1 megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) initcall megaraid_init+0x0/0x93 returned 0 after 5597 usecs calling megasas_init+0x0/0x1a2 @ 1 megasas: 00.00.05.34-rc1 Thu. Feb. 24 17:00:00 PDT 2011 initcall megasas_init+0x0/0x1a2 returned 0 after 4933 usecs calling _scsih_init+0x0/0x133 @ 1 mpt2sas version 08.100.00.00 loaded initcall _scsih_init+0x0/0x133 returned 0 after 3301 usecs calling atp870u_init+0x0/0x16 @ 1 initcall atp870u_init+0x0/0x16 returned 0 after 75 usecs calling gdth_init+0x0/0xee3 @ 1 GDT-HA: Storage RAID Controller Driver. Version: 3.05 initcall gdth_init+0x0/0xee3 returned 0 after 4755 usecs calling initio_init_driver+0x0/0x16 @ 1 initcall initio_init_driver+0x0/0x16 returned 0 after 91 usecs calling inia100_init+0x0/0x16 @ 1 initcall inia100_init+0x0/0x16 returned 0 after 73 usecs calling tw_init+0x0/0x2d @ 1 3ware Storage Controller device driver for Linux v1.26.02.003. initcall tw_init+0x0/0x2d returned 0 after 5503 usecs calling twa_init+0x0/0x2d @ 1 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. initcall twa_init+0x0/0x2d returned 0 after 5925 usecs calling twl_init+0x0/0x2d @ 1 LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. initcall twl_init+0x0/0x2d returned 0 after 6350 usecs calling ppa_driver_init+0x0/0x26 @ 1 ppa: Version 2.07 (for Linux 2.4.x) initcall ppa_driver_init+0x0/0x26 returned 0 after 5198 usecs calling imm_driver_init+0x0/0x26 @ 1 imm: Version 2.05 (for Linux 2.4.0) initcall imm_driver_init+0x0/0x26 returned 0 after 3502 usecs calling init_nsp32+0x0/0x3d @ 1 nsp32: loading... initcall init_nsp32+0x0/0x3d returned 0 after 1707 usecs calling ipr_init+0x0/0x3f @ 1 ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010) initcall ipr_init+0x0/0x3f returned 0 after 6268 usecs calling hptiop_module_init+0x0/0x35 @ 1 RocketRAID 3xxx/4xxx Controller driver v1.6 (090910) initcall hptiop_module_init+0x0/0x35 returned 0 after 4670 usecs calling stex_init+0x0/0x2d @ 1 stex: Promise SuperTrak EX Driver version: 4.6.0000.4 initcall stex_init+0x0/0x2d returned 0 after 4743 usecs calling mvs_init+0x0/0x42 @ 1 initcall mvs_init+0x0/0x42 returned 0 after 66 usecs calling libcxgbi_init_module+0x0/0x179 @ 1 libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. initcall libcxgbi_init_module+0x0/0x179 returned 0 after 11816 usecs calling cxgb3i_init_module+0x0/0x3b @ 1 Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) iscsi: registered transport (cxgb3i) initcall cxgb3i_init_module+0x0/0x3b returned 0 after 7646 usecs calling cxgb4i_init_module+0x0/0x40 @ 1 Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010) iscsi: registered transport (cxgb4i) initcall cxgb4i_init_module+0x0/0x40 returned 0 after 7653 usecs calling bnx2i_mod_init+0x0/0xae @ 1 Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Dec 31, 2010) iscsi: registered transport (bnx2i) initcall bnx2i_mod_init+0x0/0xae returned 0 after 8825 usecs calling beiscsi_module_init+0x0/0x9a @ 1 iscsi: registered transport (be2iscsi) initcall beiscsi_module_init+0x0/0x9a returned 0 after 3547 usecs calling pmcraid_init+0x0/0x124 @ 1 initcall pmcraid_init+0x0/0x124 returned 0 after 142 usecs calling pvscsi_init+0x0/0x35 @ 1 VMware PVSCSI driver - version 1.0.1.0-k initcall pvscsi_init+0x0/0x35 returned 0 after 3643 usecs calling init_st+0x0/0x159 @ 1 st: Version 20101219, fixed bufsize 32768, s/g segs 256 initcall init_st+0x0/0x159 returned 0 after 4941 usecs calling init_osst+0x0/0x133 @ 1 osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ initcall init_osst+0x0/0x133 returned 0 after 10373 usecs calling init_sd+0x0/0x113 @ 1 initcall init_sd+0x0/0x113 returned 0 after 131 usecs calling init_sr+0x0/0x3d @ 1 initcall init_sr+0x0/0x3d returned 0 after 48 usecs calling init_sg+0x0/0x10f @ 1 initcall init_sg+0x0/0x10f returned 0 after 58 usecs calling init_ch_module+0x0/0xab @ 1 SCSI Media Changer driver v0.25 initcall init_ch_module+0x0/0xab returned 0 after 2988 usecs calling ses_init+0x0/0x33 @ 1 initcall ses_init+0x0/0x33 returned 0 after 47 usecs calling osd_uld_init+0x0/0xb6 @ 1 osd: LOADED open-osd 0.2.0 initcall osd_uld_init+0x0/0xb6 returned 0 after 2491 usecs calling ahci_init+0x0/0x16 @ 1 initcall ahci_init+0x0/0x16 returned 0 after 81 usecs calling acard_ahci_init+0x0/0x16 @ 1 initcall acard_ahci_init+0x0/0x16 returned 0 after 80 usecs calling ahci_init+0x0/0x14 @ 1 initcall ahci_init+0x0/0x14 returned -19 after 94 usecs calling inic_init+0x0/0x16 @ 1 initcall inic_init+0x0/0x16 returned 0 after 64 usecs calling sil24_init+0x0/0x16 @ 1 initcall sil24_init+0x0/0x16 returned 0 after 79 usecs calling adma_ata_init+0x0/0x16 @ 1 initcall adma_ata_init+0x0/0x16 returned 0 after 65 usecs calling arasan_cf_init+0x0/0xf @ 1 initcall arasan_cf_init+0x0/0xf returned 0 after 49 usecs calling qs_ata_init+0x0/0x16 @ 1 initcall qs_ata_init+0x0/0x16 returned 0 after 82 usecs calling pdc_sata_init+0x0/0x16 @ 1 initcall pdc_sata_init+0x0/0x16 returned 0 after 63 usecs calling piix_init+0x0/0x24 @ 1 initcall piix_init+0x0/0x24 returned 0 after 68 usecs calling mv_init+0x0/0x3a @ 1 initcall mv_init+0x0/0x3a returned 0 after 126 usecs calling nv_init+0x0/0x16 @ 1 initcall nv_init+0x0/0x16 returned 0 after 68 usecs calling pdc_ata_init+0x0/0x16 @ 1 initcall pdc_ata_init+0x0/0x16 returned 0 after 66 usecs calling sil_init+0x0/0x16 @ 1 initcall sil_init+0x0/0x16 returned 0 after 67 usecs calling sis_init+0x0/0x16 @ 1 initcall sis_init+0x0/0x16 returned 0 after 65 usecs calling k2_sata_init+0x0/0x16 @ 1 initcall k2_sata_init+0x0/0x16 returned 0 after 66 usecs calling uli_init+0x0/0x16 @ 1 initcall uli_init+0x0/0x16 returned 0 after 66 usecs calling svia_init+0x0/0x16 @ 1 initcall svia_init+0x0/0x16 returned 0 after 66 usecs calling vsc_sata_init+0x0/0x16 @ 1 initcall vsc_sata_init+0x0/0x16 returned 0 after 65 usecs calling ali_init+0x0/0x40 @ 1 initcall ali_init+0x0/0x40 returned 0 after 67 usecs calling amd_init+0x0/0x16 @ 1 pata_amd 0000:00:06.0: version 0.4.1 pata_amd 0000:00:06.0: setting latency timer to 64 scsi2 : pata_amd scsi3 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 calling 2_async_port_probe+0x0/0x4d @ 5 calling 3_async_port_probe+0x0/0x4d @ 12 async_waiting @ 12 initcall amd_init+0x0/0x16 returned 0 after 32497 usecs calling artop_init+0x0/0x16 @ 1 initcall artop_init+0x0/0x16 returned 0 after 79 usecs calling atiixp_init+0x0/0x16 @ 1 initcall atiixp_init+0x0/0x16 returned 0 after 65 usecs calling atp867x_init+0x0/0x16 @ 1 initcall atp867x_init+0x0/0x16 returned 0 after 65 usecs calling cmd64x_init+0x0/0x16 @ 1 initcall cmd64x_init+0x0/0x16 returned 0 after 65 usecs calling cs5520_init+0x0/0x16 @ 1 initcall cs5520_init+0x0/0x16 returned 0 after 68 usecs calling cs5530_init+0x0/0x16 @ 1 initcall cs5530_init+0x0/0x16 returned 0 after 82 usecs calling cs5535_init+0x0/0x16 @ 1 initcall cs5535_init+0x0/0x16 returned 0 after 67 usecs calling cs5536_init+0x0/0x16 @ 1 initcall cs5536_init+0x0/0x16 returned 0 after 67 usecs calling cy82c693_init+0x0/0x16 @ 1 initcall cy82c693_init+0x0/0x16 returned 0 after 66 usecs calling efar_init+0x0/0x16 @ 1 initcall efar_init+0x0/0x16 returned 0 after 65 usecs calling hpt36x_init+0x0/0x16 @ 1 initcall hpt36x_init+0x0/0x16 returned 0 after 66 usecs calling hpt37x_init+0x0/0x16 @ 1 initcall hpt37x_init+0x0/0x16 returned 0 after 66 usecs calling hpt3x2n_init+0x0/0x16 @ 1 initcall hpt3x2n_init+0x0/0x16 returned 0 after 67 usecs calling hpt3x3_init+0x0/0x16 @ 1 initcall hpt3x3_init+0x0/0x16 returned 0 after 67 usecs calling it8213_init+0x0/0x16 @ 1 initcall it8213_init+0x0/0x16 returned 0 after 70 usecs calling it821x_init+0x0/0x16 @ 1 initcall it821x_init+0x0/0x16 returned 0 after 67 usecs calling jmicron_init+0x0/0x16 @ 1 initcall jmicron_init+0x0/0x16 returned 0 after 67 usecs calling marvell_init+0x0/0x16 @ 1 initcall marvell_init+0x0/0x16 returned 0 after 68 usecs calling netcell_init+0x0/0x16 @ 1 initcall netcell_init+0x0/0x16 returned 0 after 68 usecs calling ninja32_init+0x0/0x16 @ 1 ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100 ata1.00: 488397168 sectors, multi 1: LBA48 ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x3f01f (20:600:0x13) initcall ninja32_init+0x0/0x16 returned 0 after 69 usecs calling ns87415_init+0x0/0x16 @ 1 initcall ns87415_init+0x0/0x16 returned 0 after 68 usecs ata1.00: configured for UDMA/100 async_waiting @ 5 async_continuing @ 5 after 2 usec scsi 2:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5 calling 4_sd_probe_async+0x0/0x1a3 @ 1484 sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: Attached scsi generic sg0 type 0 initcall 2_async_port_probe+0x0/0x4d returned 0 after 186890 usecs async_continuing @ 12 after 195838 usec calling oldpiix_init+0x0/0x16 @ 1 initcall oldpiix_init+0x0/0x16 returned 0 after 78 usecs calling optidma_init+0x0/0x16 @ 1 initcall optidma_init+0x0/0x16 returned 0 after 67 usecs calling pdc2027x_init+0x0/0x16 @ 1 initcall pdc2027x_init+0x0/0x16 returned 0 after 70 usecs calling pdc202xx_init+0x0/0x16 @ 1 initcall pdc202xx_init+0x0/0x16 returned 0 after 69 usecs calling radisys_init+0x0/0x16 @ 1 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > initcall radisys_init+0x0/0x16 returned 0 after 101 usecs sd 2:0:0:0: [sda] Attached SCSI disk initcall 4_sd_probe_async+0x0/0x1a3 returned 0 after 96346 usecs calling rdc_init+0x0/0x16 @ 1 initcall rdc_init+0x0/0x16 returned 0 after 75 usecs calling sc1200_init+0x0/0x16 @ 1 initcall sc1200_init+0x0/0x16 returned 0 after 105 usecs calling sch_init+0x0/0x16 @ 1 initcall sch_init+0x0/0x16 returned 0 after 84 usecs calling serverworks_init+0x0/0x16 @ 1 initcall serverworks_init+0x0/0x16 returned 0 after 69 usecs calling sil680_init+0x0/0x16 @ 1 initcall sil680_init+0x0/0x16 returned 0 after 69 usecs calling sis_init+0x0/0x16 @ 1 ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66 ata2: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x701f (600:60:0x1c) initcall sis_init+0x0/0x16 returned 0 after 21442 usecs calling ata_tosh_init+0x0/0x16 @ 1 initcall ata_tosh_init+0x0/0x16 returned 0 after 71 usecs ata2.01: configured for UDMA/33 async_waiting @ 12 async_continuing @ 12 after 2 usec scsi 3:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 3:0:1:0: Attached scsi CD-ROM sr0 sr 3:0:1:0: Attached scsi generic sg1 type 5 initcall 3_async_port_probe+0x0/0x4d returned 0 after 381345 usecs calling triflex_init+0x0/0x16 @ 1 initcall triflex_init+0x0/0x16 returned 0 after 73 usecs calling via_init+0x0/0x16 @ 1 initcall via_init+0x0/0x16 returned 0 after 70 usecs calling sl82c105_init+0x0/0x16 @ 1 initcall sl82c105_init+0x0/0x16 returned 0 after 68 usecs calling cmd640_init+0x0/0x16 @ 1 initcall cmd640_init+0x0/0x16 returned 0 after 69 usecs calling isapnp_init+0x0/0xf @ 1 initcall isapnp_init+0x0/0xf returned 0 after 50 usecs calling mpiix_init+0x0/0x16 @ 1 initcall mpiix_init+0x0/0x16 returned 0 after 70 usecs calling ns87410_init+0x0/0x16 @ 1 initcall ns87410_init+0x0/0x16 returned 0 after 71 usecs calling opti_init+0x0/0x16 @ 1 initcall opti_init+0x0/0x16 returned 0 after 70 usecs calling pcmcia_init+0x0/0xf @ 1 initcall pcmcia_init+0x0/0xf returned 0 after 58 usecs calling pata_platform_init+0x0/0xf @ 1 initcall pata_platform_init+0x0/0xf returned 0 after 66 usecs calling qdi_init+0x0/0x1f6 @ 1 initcall qdi_init+0x0/0x1f6 returned -19 after 1 usecs calling rz1000_init+0x0/0x16 @ 1 initcall rz1000_init+0x0/0x16 returned 0 after 72 usecs calling pacpi_init+0x0/0x16 @ 1 initcall pacpi_init+0x0/0x16 returned 0 after 75 usecs calling ata_generic_init+0x0/0x16 @ 1 initcall ata_generic_init+0x0/0x16 returned 0 after 70 usecs calling legacy_init+0x0/0x87a @ 1 initcall legacy_init+0x0/0x87a returned -19 after 18 usecs calling ce4100_spi_init+0x0/0x16 @ 1 initcall ce4100_spi_init+0x0/0x16 returned 0 after 79 usecs calling fixed_mdio_bus_init+0x0/0xf0 @ 1 Fixed MDIO Bus: probed initcall fixed_mdio_bus_init+0x0/0xf0 returned 0 after 2187 usecs calling e1000_init_module+0x0/0x39 @ 1 e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 e1000e: Copyright(c) 1999 - 2011 Intel Corporation. initcall e1000_init_module+0x0/0x39 returned 0 after 9187 usecs calling cxgb3_init_module+0x0/0x1b @ 1 initcall cxgb3_init_module+0x0/0x1b returned 0 after 73 usecs calling cxgb4_init_module+0x0/0x4d @ 1 initcall cxgb4_init_module+0x0/0x4d returned 0 after 78 usecs calling atl2_init_module+0x0/0x49 @ 1 Atheros(R) L2 Ethernet Driver - version 2.2.3 Copyright (c) 2007 Atheros Corporation. initcall atl2_init_module+0x0/0x49 returned 0 after 7577 usecs calling plip_init+0x0/0x57 @ 1 NET3 PLIP version 2.4-parport gniibe@mri.co.jp plip0: Parallel port at 0x378, using IRQ 7. initcall plip_init+0x0/0x57 returned 0 after 8286 usecs calling vortex_init+0x0/0xc0 @ 1 initcall vortex_init+0x0/0xc0 returned 0 after 126 usecs calling e100_init_module+0x0/0x5a @ 1 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation initcall e100_init_module+0x0/0x5a returned 0 after 8843 usecs calling tg3_init+0x0/0x16 @ 1 initcall tg3_init+0x0/0x16 returned 0 after 78 usecs calling bnx2_init+0x0/0x16 @ 1 initcall bnx2_init+0x0/0x16 returned 0 after 73 usecs calling cnic_init+0x0/0x79 @ 1 cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.13 (Jan 31, 2011) initcall cnic_init+0x0/0x79 returned 0 after 5893 usecs calling skge_init_module+0x0/0x2e @ 1 initcall skge_init_module+0x0/0x2e returned 0 after 108 usecs calling rhine_init+0x0/0x5f @ 1 initcall rhine_init+0x0/0x5f returned 0 after 82 usecs calling net_olddevs_init+0x0/0x84 @ 1 D-Link DE-620 pocket adapter io 0x378, which is busy. initcall net_olddevs_init+0x0/0x84 returned 0 after 4729 usecs calling init_nic+0x0/0x16 @ 1 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 IOAPIC[0]: Set routing entry (2-23 -> 0x61 -> IRQ 23 Mode:1 Active:1) forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 forcedeth 0000:00:0a.0: setting latency timer to 64 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12 forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 initcall init_nic+0x0/0x16 returned 0 after 549672 usecs calling ppp_init+0x0/0xe5 @ 1 PPP generic driver version 2.4.2 initcall ppp_init+0x0/0xe5 returned 0 after 3095 usecs calling ppp_async_init+0x0/0x33 @ 1 initcall ppp_async_init+0x0/0x33 returned 0 after 1 usecs calling ppp_sync_init+0x0/0x33 @ 1 initcall ppp_sync_init+0x0/0x33 returned 0 after 2 usecs calling deflate_init+0x0/0x31 @ 1 PPP Deflate Compression module registered initcall deflate_init+0x0/0x31 returned 0 after 3666 usecs calling bsdcomp_init+0x0/0x27 @ 1 PPP BSD Compression module registered initcall bsdcomp_init+0x0/0x27 returned 0 after 3327 usecs calling ppp_mppe_init+0x0/0xb2 @ 1 PPP MPPE Compression module registered initcall ppp_mppe_init+0x0/0xb2 returned 0 after 3632 usecs calling pppox_init+0x0/0xf @ 1 NET: Registered protocol family 24 initcall pppox_init+0x0/0xf returned 0 after 3073 usecs calling pppoe_init+0x0/0x71 @ 1 initcall pppoe_init+0x0/0x71 returned 0 after 16 usecs calling slip_init+0x0/0xb4 @ 1 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. initcall slip_init+0x0/0xb4 returned 0 after 16842 usecs calling de600_init+0x0/0x326 @ 1 DE600: port 0x378 busy initcall de600_init+0x0/0x326 returned -16 after 2070 usecs initcall de600_init+0x0/0x326 returned with error code -16 calling rtl8139_init_module+0x0/0x16 @ 1 8139too: 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 IOAPIC[0]: Set routing entry (2-17 -> 0x69 -> IRQ 17 Mode:1 Active:1) 8139too 0000:05:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 8139too 0000:05:07.0: eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 17 initcall rtl8139_init_module+0x0/0x16 returned 0 after 28986 usecs calling atp_init_module+0x0/0x89 @ 1 atp.c:v1.09=ac 2002/10/01 Donald Becker initcall atp_init_module+0x0/0x89 returned -19 after 5134 usecs calling rtl8169_init_module+0x0/0x16 @ 1 initcall rtl8169_init_module+0x0/0x16 returned 0 after 75 usecs calling hostap_init+0x0/0x3d @ 1 initcall hostap_init+0x0/0x3d returned 0 after 4 usecs calling init_netconsole+0x0/0x1cf @ 1 console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x1cf returned 0 after 5484 usecs calling i2o_iop_init+0x0/0x45 @ 1 I2O subsystem v1.325 i2o: max drivers = 8 initcall i2o_iop_init+0x0/0x45 returned 0 after 3988 usecs calling i2o_config_init+0x0/0x8b @ 1 I2O Configuration OSM v1.323 initcall i2o_config_init+0x0/0x8b returned 0 after 2760 usecs calling i2o_bus_init+0x0/0x3e @ 1 I2O Bus Adapter OSM v1.317 initcall i2o_bus_init+0x0/0x3e returned 0 after 2442 usecs calling i2o_block_init+0x0/0x10e @ 1 I2O Block Device OSM v1.325 initcall i2o_block_init+0x0/0x10e returned 0 after 2694 usecs calling i2o_scsi_init+0x0/0x3e @ 1 I2O SCSI Peripheral OSM v1.316 initcall i2o_scsi_init+0x0/0x3e returned 0 after 2780 usecs calling i2o_proc_init+0x0/0x169 @ 1 I2O ProcFS OSM v1.316 initcall i2o_proc_init+0x0/0x169 returned 0 after 2043 usecs calling fusion_init+0x0/0xe9 @ 1 Fusion MPT base driver 3.04.18 Copyright (c) 1999-2008 LSI Corporation initcall fusion_init+0x0/0xe9 returned 0 after 6233 usecs calling mptspi_init+0x0/0xd5 @ 1 Fusion MPT SPI Host driver 3.04.18 initcall mptspi_init+0x0/0xd5 returned 0 after 3151 usecs calling mptfc_init+0x0/0xe8 @ 1 Fusion MPT FC Host driver 3.04.18 initcall mptfc_init+0x0/0xe8 returned 0 after 3062 usecs calling mptsas_init+0x0/0x111 @ 1 Fusion MPT SAS Host driver 3.04.18 initcall mptsas_init+0x0/0x111 returned 0 after 3164 usecs calling mptctl_init+0x0/0x138 @ 1 Fusion MPT misc device (ioctl) driver 3.04.18 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) initcall mptctl_init+0x0/0x138 returned 0 after 11976 usecs calling mpt_lan_init+0x0/0x7f @ 1 Fusion MPT LAN driver 3.04.18 initcall mpt_lan_init+0x0/0x7f returned 0 after 2648 usecs calling fw_core_init+0x0/0x81 @ 1 initcall fw_core_init+0x0/0x81 returned 0 after 57 usecs calling fw_ohci_init+0x0/0x16 @ 1 initcall fw_ohci_init+0x0/0x16 returned 0 after 84 usecs calling sbp2_init+0x0/0x45 @ 1 initcall sbp2_init+0x0/0x45 returned 0 after 78 usecs calling fwnet_init+0x0/0x72 @ 1 initcall fwnet_init+0x0/0x72 returned 0 after 141 usecs calling nosy_init+0x0/0x16 @ 1 initcall nosy_init+0x0/0x16 returned 0 after 90 usecs calling uio_init+0x0/0xd4 @ 1 initcall uio_init+0x0/0xd4 returned 0 after 55 usecs calling cdrom_init+0x0/0x15 @ 1 initcall cdrom_init+0x0/0x15 returned 0 after 1 usecs calling nonstatic_sysfs_init+0x0/0xf @ 1 initcall nonstatic_sysfs_init+0x0/0xf returned 0 after 3 usecs calling yenta_socket_init+0x0/0x16 @ 1 initcall yenta_socket_init+0x0/0x16 returned 0 after 86 usecs calling pd6729_module_init+0x0/0x1b @ 1 initcall pd6729_module_init+0x0/0x1b returned 0 after 82 usecs calling init_i82365+0x0/0x45b @ 1 Intel ISA PCIC probe: not found. initcall init_i82365+0x0/0x45b returned -19 after 3176 usecs calling i82092aa_module_init+0x0/0x1b @ 1 initcall i82092aa_module_init+0x0/0x1b returned 0 after 81 usecs calling init_tcic+0x0/0x629 @ 1 Databook TCIC-2 PCMCIA probe: not found. initcall init_tcic+0x0/0x629 returned -19 after 3709 usecs calling aoe_init+0x0/0xa2 @ 1 aoe: AoE v47 initialised. initcall aoe_init+0x0/0xa2 returned 0 after 2816 usecs calling uwb_subsys_init+0x0/0x47 @ 1 initcall uwb_subsys_init+0x0/0x47 returned 0 after 50 usecs calling umc_bus_init+0x0/0xf @ 1 initcall umc_bus_init+0x0/0xf returned 0 after 49 usecs calling whci_init+0x0/0x16 @ 1 initcall whci_init+0x0/0x16 returned 0 after 88 usecs calling whcrc_driver_init+0x0/0x16 @ 1 initcall whcrc_driver_init+0x0/0x16 returned 0 after 59 usecs calling hwarc_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver hwa-rc initcall hwarc_driver_init+0x0/0x16 returned 0 after 4240 usecs calling mon_init+0x0/0xe4 @ 1 initcall mon_init+0x0/0xe4 returned 0 after 144 usecs calling whci_hc_driver_init+0x0/0x16 @ 1 initcall whci_hc_driver_init+0x0/0x16 returned 0 after 65 usecs calling ehci_hcd_init+0x0/0x6f @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 IOAPIC[0]: Set routing entry (2-22 -> 0x71 -> IRQ 22 Mode:1 Active:1) ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 32 is not supported ehci_hcd 0000:00:02.1: irq 22, io mem 0x40000000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.39-rc5-i486-1sys+ ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected initcall ehci_hcd_init+0x0/0x6f returned 0 after 93116 usecs calling oxu_module_init+0x0/0xf @ 1 initcall oxu_module_init+0x0/0xf returned 0 after 52 usecs calling isp116x_init+0x0/0x3e @ 1 116x: driver isp116x-hcd, 03 Nov 2005 initcall isp116x_init+0x0/0x3e returned 0 after 3370 usecs calling isp1362_init+0x0/0x3e @ 1 driver isp1362-hcd, 2005-04-04 initcall isp1362_init+0x0/0x3e returned 0 after 2780 usecs calling ohci_hcd_mod_init+0x0/0x51 @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 IOAPIC[0]: Set routing entry (2-21 -> 0x79 -> IRQ 21 Mode:1 Active:1) ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 21, io mem 0xda102000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.39-rc5-i486-1sys+ ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected initcall ohci_hcd_mod_init+0x0/0x51 returned 0 after 124871 usecs calling uhci_hcd_init+0x0/0xb8 @ 1 uhci_hcd: USB Universal Host Controller Interface driver initcall uhci_hcd_init+0x0/0xb8 returned 0 after 5069 usecs calling xhci_hcd_init+0x0/0x26 @ 1 initcall xhci_hcd_init+0x0/0x26 returned 0 after 80 usecs calling sl811h_init+0x0/0x3e @ 1 sl811: driver sl811-hcd, 19 May 2005 initcall sl811h_init+0x0/0x3e returned 0 after 3292 usecs calling init_sl811_cs+0x0/0xf @ 1 initcall init_sl811_cs+0x0/0xf returned 0 after 47 usecs calling r8a66597_init+0x0/0x3e @ 1 r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 initcall r8a66597_init+0x0/0x3e returned 0 after 4051 usecs calling isp1760_init+0x0/0x44 @ 1 initcall isp1760_init+0x0/0x44 returned 0 after 157 usecs calling hwahc_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver hwa-hc initcall hwahc_driver_init+0x0/0x16 returned 0 after 4248 usecs calling c67x00_init+0x0/0xf @ 1 initcall c67x00_init+0x0/0xf returned 0 after 48 usecs calling wusbcore_init+0x0/0x73 @ 1 initcall wusbcore_init+0x0/0x73 returned 0 after 27 usecs calling cbaf_driver_init+0x0/0x16 @ 1 usbcore: registered new interface driver wusb-cbaf initcall cbaf_driver_init+0x0/0x16 returned 0 after 4512 usecs calling acm_init+0x0/0xcd @ 1 usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters initcall acm_init+0x0/0xcd returned 0 after 11392 usecs calling usblp_init+0x0/0x16 @ 1 usbcore: registered new interface driver usblp initcall usblp_init+0x0/0x16 returned 0 after 4159 usecs calling wdm_init+0x0/0x16 @ 1 usbcore: registered new interface driver cdc_wdm initcall wdm_init+0x0/0x16 returned 0 after 4320 usecs calling usbtmc_init+0x0/0x2e @ 1 usbcore: registered new interface driver usbtmc initcall usbtmc_init+0x0/0x2e returned 0 after 4243 usecs calling uas_init+0x0/0x1b @ 1 usbcore: registered new interface driver uas initcall uas_init+0x0/0x1b returned 0 after 3989 usecs calling usb_stor_init+0x0/0x44 @ 1 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. initcall usb_stor_init+0x0/0x44 returned 0 after 11419 usecs calling usb_usual_init+0x0/0x30 @ 1 usbcore: registered new interface driver libusual initcall usb_usual_init+0x0/0x30 returned 0 after 4436 usecs calling alauda_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-alauda initcall alauda_init+0x0/0x16 returned 0 after 4588 usecs calling cypress_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-cypress initcall cypress_init+0x0/0x16 returned 0 after 4681 usecs calling datafab_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-datafab initcall datafab_init+0x0/0x16 returned 0 after 4667 usecs calling ene_ub6250_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums_eneub6250 initcall ene_ub6250_init+0x0/0x16 returned 0 after 4835 usecs calling freecom_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-freecom initcall freecom_init+0x0/0x16 returned 0 after 4669 usecs calling isd200_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-isd200 initcall isd200_init+0x0/0x16 returned 0 after 4585 usecs calling jumpshot_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-jumpshot initcall jumpshot_init+0x0/0x16 returned 0 after 4754 usecs calling karma_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-karma initcall karma_init+0x0/0x16 returned 0 after 4498 usecs calling onetouch_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-onetouch initcall onetouch_init+0x0/0x16 returned 0 after 4754 usecs calling realtek_cr_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-realtek initcall realtek_cr_init+0x0/0x16 returned 0 after 4674 usecs calling sddr09_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-sddr09 initcall sddr09_init+0x0/0x16 returned 0 after 4581 usecs calling sddr55_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-sddr55 initcall sddr55_init+0x0/0x16 returned 0 after 4584 usecs calling usbat_init+0x0/0x16 @ 1 usbcore: registered new interface driver ums-usbat initcall usbat_init+0x0/0x16 returned 0 after 4491 usecs calling i8042_init+0x0/0x3b1 @ 1 i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 initcall i8042_init+0x0/0x3b1 returned 0 after 17592 usecs calling parkbd_init+0x0/0x17a @ 1 parport0: cannot grant exclusive access for device parkbd initcall parkbd_init+0x0/0x17a returned -19 after 5032 usecs calling serport_init+0x0/0x2c @ 1 initcall serport_init+0x0/0x2c returned 0 after 2 usecs calling ct82c710_init+0x0/0x13c @ 1 initcall ct82c710_init+0x0/0x13c returned -19 after 12 usecs calling pcips2_init+0x0/0x16 @ 1 initcall pcips2_init+0x0/0x16 returned 0 after 90 usecs calling ps2mult_init+0x0/0x16 @ 1 initcall ps2mult_init+0x0/0x16 returned 0 after 63 usecs calling serio_raw_init+0x0/0x16 @ 1 initcall serio_raw_init+0x0/0x16 returned 0 after 62 usecs calling altera_ps2_init+0x0/0xf @ 1 initcall altera_ps2_init+0x0/0xf returned 0 after 47 usecs calling emu_init+0x0/0x16 @ 1 initcall emu_init+0x0/0x16 returned 0 after 93 usecs calling fm801_gp_init+0x0/0x16 @ 1 initcall fm801_gp_init+0x0/0x16 returned 0 after 79 usecs calling l4_init+0x0/0x268 @ 1 initcall l4_init+0x0/0x268 returned -19 after 12 usecs calling ns558_init+0x0/0x2d9 @ 1 gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 59659kHz initcall ns558_init+0x0/0x2d9 returned 0 after 30583 usecs calling mousedev_init+0x0/0x7f @ 1 mousedev: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x7f returned 0 after 4398 usecs calling joydev_init+0x0/0xf @ 1 initcall joydev_init+0x0/0xf returned 0 after 3 usecs calling evdev_init+0x0/0xf @ 1 initcall evdev_init+0x0/0xf returned 0 after 159 usecs calling adp5520_keys_init+0x0/0xf @ 1 initcall adp5520_keys_init+0x0/0xf returned 0 after 49 usecs calling adp5588_init+0x0/0x11 @ 1 initcall adp5588_init+0x0/0x11 returned 0 after 52 usecs calling atkbd_init+0x0/0x20 @ 1 initcall atkbd_init+0x0/0x20 returned 0 after 74 usecs calling gpio_keys_init+0x0/0xf @ 1 initcall gpio_keys_init+0x0/0xf returned 0 after 59 usecs calling gpio_keys_polled_init+0x0/0xf @ 1 initcall gpio_keys_polled_init+0x0/0xf returned 0 after 56 usecs calling lkkbd_init+0x0/0x16 @ 1 initcall lkkbd_init+0x0/0x16 returned 0 after 70 usecs calling lm8323_init+0x0/0x11 @ 1 initcall lm8323_init+0x0/0x11 returned 0 after 54 usecs calling matrix_keypad_init+0x0/0xf @ 1 initcall matrix_keypad_init+0x0/0xf returned 0 after 53 usecs calling max7359_init+0x0/0x11 @ 1 initcall max7359_init+0x0/0x11 returned 0 after 70 usecs calling mcs_touchkey_init+0x0/0x11 @ 1 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 initcall mcs_touchkey_init+0x0/0x11 returned 0 after 7290 usecs calling nkbd_init+0x0/0x16 @ 1 initcall nkbd_init+0x0/0x16 returned 0 after 71 usecs calling opencores_kbd_init+0x0/0xf @ 1 initcall opencores_kbd_init+0x0/0xf returned 0 after 56 usecs calling qt1070_init+0x0/0x11 @ 1 initcall qt1070_init+0x0/0x11 returned 0 after 49 usecs calling qt2160_init+0x0/0x11 @ 1 initcall qt2160_init+0x0/0x11 returned 0 after 46 usecs calling stmpe_keypad_init+0x0/0xf @ 1 initcall stmpe_keypad_init+0x0/0xf returned 0 after 49 usecs calling skbd_init+0x0/0x16 @ 1 initcall skbd_init+0x0/0x16 returned 0 after 66 usecs calling sunkbd_init+0x0/0x16 @ 1 initcall sunkbd_init+0x0/0x16 returned 0 after 75 usecs calling tc3589x_keypad_init+0x0/0xf @ 1 initcall tc3589x_keypad_init+0x0/0xf returned 0 after 57 usecs calling twl4030_kp_init+0x0/0xf @ 1 initcall twl4030_kp_init+0x0/0xf returned 0 after 48 usecs calling xtkbd_init+0x0/0x16 @ 1 initcall xtkbd_init+0x0/0x16 returned 0 after 65 usecs calling atp_init+0x0/0x16 @ 1 usbcore: registered new interface driver appletouch initcall atp_init+0x0/0x16 returned 0 after 4593 usecs calling bcm5974_init+0x0/0x16 @ 1 usbcore: registered new interface driver bcm5974 initcall bcm5974_init+0x0/0x16 returned 0 after 4329 usecs calling gpio_mouse_init+0x0/0xf @ 1 initcall gpio_mouse_init+0x0/0xf returned 0 after 48 usecs calling inport_init+0x0/0x131 @ 1 inport.c: Didn't find InPort mouse at 0x23c initcall inport_init+0x0/0x131 returned -19 after 3844 usecs calling logibm_init+0x0/0x139 @ 1 logibm.c: Didn't find Logitech busmouse at 0x23c initcall logibm_init+0x0/0x139 returned -19 after 4365 usecs calling pc110pad_init+0x0/0x1a2 @ 1 initcall pc110pad_init+0x0/0x1a2 returned -19 after 2 usecs calling psmouse_init+0x0/0x7d @ 1 initcall psmouse_init+0x0/0x7d returned 0 after 108 usecs calling sermouse_init+0x0/0x16 @ 1 initcall sermouse_init+0x0/0x16 returned 0 after 130 usecs calling synaptics_i2c_init+0x0/0x11 @ 1 initcall synaptics_i2c_init+0x0/0x11 returned 0 after 111 usecs calling vsxxxaa_init+0x0/0x16 @ 1 initcall vsxxxaa_init+0x0/0x16 returned 0 after 123 usecs calling analog_init+0x0/0xc9 @ 1 initcall analog_init+0x0/0xc9 returned 0 after 124 usecs calling usb_acecad_init+0x0/0x2e @ 1 usbcore: registered new interface driver usb_acecad acecad: v3.2:USB Acecad Flair tablet driver initcall usb_acecad_init+0x0/0x2e returned 0 after 8414 usecs calling aiptek_init+0x0/0x3a @ 1 usbcore: registered new interface driver aiptek aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen initcall aiptek_init+0x0/0x3a returned 0 after 16662 usecs calling gtco_init+0x0/0x46 @ 1 usbcore: registered new interface driver gtco GTCO usb driver version: 2.00.0006 initcall gtco_init+0x0/0x46 returned 0 after 6982 usecs calling hanwang_init+0x0/0x16 @ 1 usbcore: registered new interface driver hanwang initcall hanwang_init+0x0/0x16 returned 0 after 4329 usecs calling kbtab_init+0x0/0x2e @ 1 usbcore: registered new interface driver kbtab kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver initcall kbtab_init+0x0/0x2e returned 0 after 8516 usecs calling wacom_init+0x0/0x2e @ 1 usbcore: registered new interface driver wacom wacom: v1.52:USB Wacom tablet driver initcall wacom_init+0x0/0x2e returned 0 after 7403 usecs calling pm860x_touch_init+0x0/0xf @ 1 initcall pm860x_touch_init+0x0/0xf returned 0 after 54 usecs calling ad7877_init+0x0/0xf @ 1 initcall ad7877_init+0x0/0xf returned 0 after 47 usecs calling ad7879_i2c_init+0x0/0x11 @ 1 initcall ad7879_i2c_init+0x0/0x11 returned 0 after 48 usecs calling ad7879_spi_init+0x0/0xf @ 1 initcall ad7879_spi_init+0x0/0xf returned 0 after 48 usecs calling ads7846_init+0x0/0xf @ 1 initcall ads7846_init+0x0/0xf returned 0 after 47 usecs calling mxt_init+0x0/0x11 @ 1 initcall mxt_init+0x0/0x11 returned 0 after 47 usecs calling bu21013_init+0x0/0x11 @ 1 initcall bu21013_init+0x0/0x11 returned 0 after 63 usecs calling cy8ctmg110_init+0x0/0x11 @ 1 initcall cy8ctmg110_init+0x0/0x11 returned 0 after 46 usecs calling da9034_touch_init+0x0/0xf @ 1 initcall da9034_touch_init+0x0/0xf returned 0 after 48 usecs calling dynapro_init+0x0/0x16 @ 1 initcall dynapro_init+0x0/0x16 returned 0 after 67 usecs calling hampshire_init+0x0/0x16 @ 1 initcall hampshire_init+0x0/0x16 returned 0 after 215 usecs calling gunze_init+0x0/0x16 @ 1 initcall gunze_init+0x0/0x16 returned 0 after 75 usecs calling eeti_ts_init+0x0/0x11 @ 1 initcall eeti_ts_init+0x0/0x11 returned 0 after 47 usecs calling elo_init+0x0/0x16 @ 1 initcall elo_init+0x0/0x16 returned 0 after 64 usecs calling fujitsu_init+0x0/0x16 @ 1 initcall fujitsu_init+0x0/0x16 returned 0 after 78 usecs calling inexio_init+0x0/0x16 @ 1 initcall inexio_init+0x0/0x16 returned 0 after 70 usecs psmouse serio1: ID: 00 00 14 calling mcs5000_ts_init+0x0/0x11 @ 1 initcall mcs5000_ts_init+0x0/0x11 returned 0 after 49 usecs calling mtouch_init+0x0/0x16 @ 1 initcall mtouch_init+0x0/0x16 returned 0 after 66 usecs calling mk712_init+0x0/0x1bf @ 1 mk712: device not present initcall mk712_init+0x0/0x1bf returned -19 after 2324 usecs calling htcpen_isa_init+0x0/0x29 @ 1 initcall htcpen_isa_init+0x0/0x29 returned -19 after 2 usecs calling usbtouch_init+0x0/0x16 @ 1 usbcore: registered new interface driver usbtouchscreen initcall usbtouch_init+0x0/0x16 returned 0 after 4927 usecs calling pcap_ts_init+0x0/0xf @ 1 initcall pcap_ts_init+0x0/0xf returned 0 after 69 usecs calling pm_init+0x0/0x16 @ 1 initcall pm_init+0x0/0x16 returned 0 after 66 usecs calling st1232_ts_init+0x0/0x11 @ 1 initcall st1232_ts_init+0x0/0x11 returned 0 after 48 usecs calling stmpe_ts_init+0x0/0xf @ 1 initcall stmpe_ts_init+0x0/0xf returned 0 after 49 usecs calling touchit213_init+0x0/0x16 @ 1 initcall touchit213_init+0x0/0x16 returned 0 after 253 usecs calling tr_init+0x0/0x16 @ 1 initcall tr_init+0x0/0x16 returned 0 after 63 usecs calling tw_init+0x0/0x16 @ 1 initcall tw_init+0x0/0x16 returned 0 after 68 usecs calling tsc2005_init+0x0/0xf @ 1 initcall tsc2005_init+0x0/0xf returned 0 after 45 usecs calling tsc2007_init+0x0/0x11 @ 1 initcall tsc2007_init+0x0/0x11 returned 0 after 47 usecs calling w8001_init+0x0/0x16 @ 1 initcall w8001_init+0x0/0x16 returned 0 after 63 usecs calling wm831x_ts_init+0x0/0xf @ 1 initcall wm831x_ts_init+0x0/0xf returned 0 after 49 usecs calling tps6507x_ts_init+0x0/0xf @ 1 initcall tps6507x_ts_init+0x0/0xf returned 0 after 49 usecs calling pm860x_onkey_init+0x0/0xf @ 1 initcall pm860x_onkey_init+0x0/0xf returned 0 after 48 usecs calling ab8500_ponkey_init+0x0/0xf @ 1 initcall ab8500_ponkey_init+0x0/0xf returned 0 after 48 usecs calling ad714x_i2c_init+0x0/0x11 @ 1 initcall ad714x_i2c_init+0x0/0x11 returned 0 after 48 usecs calling ad714x_spi_init+0x0/0xf @ 1 initcall ad714x_spi_init+0x0/0xf returned 0 after 45 usecs calling adxl34x_i2c_init+0x0/0x11 @ 1 initcall adxl34x_i2c_init+0x0/0x11 returned 0 after 46 usecs calling adxl34x_spi_init+0x0/0xf @ 1 initcall adxl34x_spi_init+0x0/0xf returned 0 after 45 usecs calling apanel_init+0x0/0x191 @ 1 apanel: Fujitsu BIOS signature 'FJKEYINF' not found... initcall apanel_init+0x0/0x191 returned -19 after 5061 usecs calling ati_remote_init+0x0/0x43 @ 1 usbcore: registered new interface driver ati_remote ati_remote: 2.2.1:ATI/X10 RF USB Remote Control initcall ati_remote_init+0x0/0x43 returned 0 after 8769 usecs calling ati_remote2_init+0x0/0x43 @ 1 usbcore: registered new interface driver ati_remote2 ati_remote2: ATI/Philips USB RF remote driver 0.3 initcall ati_remote2_init+0x0/0x43 returned 0 after 9005 usecs calling atlas_acpi_init+0x0/0x1d @ 1 initcall atlas_acpi_init+0x0/0x1d returned 0 after 74 usecs calling cm109_init+0x0/0xea @ 1 cm109: Keymap for Komunikate KIP1000 phone loaded usbcore: registered new interface driver cm109 cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad initcall cm109_init+0x0/0xea returned 0 after 13701 usecs calling cma3000_i2c_init+0x0/0x11 @ 1 initcall cma3000_i2c_init+0x0/0x11 returned 0 after 48 usecs calling usb_keyspan_init+0x0/0x35 @ 1 usbcore: registered new interface driver keyspan_remote initcall usb_keyspan_init+0x0/0x35 returned 0 after 4921 usecs calling max8925_onkey_init+0x0/0xf @ 1 initcall max8925_onkey_init+0x0/0xf returned 0 after 49 usecs calling pcap_keys_init+0x0/0xf @ 1 initcall pcap_keys_init+0x0/0xf returned 0 after 47 usecs calling pcf8574_kp_init+0x0/0x11 @ 1 initcall pcf8574_kp_init+0x0/0x11 returned 0 after 47 usecs calling pcspkr_init+0x0/0xf @ 1 input: PC Speaker as /devices/platform/pcspkr/input/input3 initcall pcspkr_init+0x0/0xf returned 0 after 5355 usecs calling powermate_init+0x0/0x16 @ 1 usbcore: registered new interface driver powermate initcall powermate_init+0x0/0x16 returned 0 after 4508 usecs calling rotary_encoder_init+0x0/0xf @ 1 initcall rotary_encoder_init+0x0/0xf returned 0 after 51 usecs calling twl4030_pwrbutton_init+0x0/0x14 @ 1 initcall twl4030_pwrbutton_init+0x0/0x14 returned -19 after 90 usecs calling twl4030_vibra_init+0x0/0xf @ 1 initcall twl4030_vibra_init+0x0/0xf returned 0 after 48 usecs calling uinput_init+0x0/0xf @ 1 initcall uinput_init+0x0/0xf returned 0 after 79 usecs calling wb_module_init+0x0/0x297 @ 1 wistron_btns: System unknown initcall wb_module_init+0x0/0x297 returned -19 after 2580 usecs calling wm831x_on_init+0x0/0xf @ 1 initcall wm831x_on_init+0x0/0xf returned 0 after 48 usecs calling yealink_dev_init+0x0/0x2e @ 1 usbcore: registered new interface driver yealink yealink: yld-20051230:Yealink phone driver initcall yealink_dev_init+0x0/0x2e returned 0 after 8083 usecs calling i2c_dev_init+0x0/0xb8 @ 1 i2c /dev entries driver initcall i2c_dev_init+0x0/0xb8 returned 0 after 2194 usecs calling ce4100_i2c_init+0x0/0x16 @ 1 initcall ce4100_i2c_init+0x0/0x16 returned 0 after 98 usecs calling media_devnode_init+0x0/0x73 @ 1 Linux media interface: v0.10 initcall media_devnode_init+0x0/0x73 returned 0 after 2612 usecs calling init_rc_map_adstech_dvb_t_pci+0x0/0xf @ 1 initcall init_rc_map_adstech_dvb_t_pci+0x0/0xf returned 0 after 2 usecs calling init_rc_map_alink_dtu_m+0x0/0xf @ 1 initcall init_rc_map_alink_dtu_m+0x0/0xf returned 0 after 1 usecs calling init_rc_map_anysee+0x0/0xf @ 1 initcall init_rc_map_anysee+0x0/0xf returned 0 after 1 usecs calling init_rc_map_apac_viewcomp+0x0/0xf @ 1 initcall init_rc_map_apac_viewcomp+0x0/0xf returned 0 after 1 usecs calling init_rc_map_asus_pc39+0x0/0xf @ 1 initcall init_rc_map_asus_pc39+0x0/0xf returned 0 after 1 usecs calling init_rc_map_ati_tv_wonder_hd_600+0x0/0xf @ 1 initcall init_rc_map_ati_tv_wonder_hd_600+0x0/0xf returned 0 after 1 usecs calling init_rc_map_avermedia_a16d+0x0/0xf @ 1 initcall init_rc_map_avermedia_a16d+0x0/0xf returned 0 after 2 usecs calling init_rc_map_avermedia+0x0/0xf @ 1 initcall init_rc_map_avermedia+0x0/0xf returned 0 after 1 usecs calling init_rc_map_avermedia_cardbus+0x0/0xf @ 1 initcall init_rc_map_avermedia_cardbus+0x0/0xf returned 0 after 2 usecs calling init_rc_map_avermedia_dvbt+0x0/0xf @ 1 initcall init_rc_map_avermedia_dvbt+0x0/0xf returned 0 after 2 usecs calling init_rc_map_avermedia_m135a+0x0/0xf @ 1 initcall init_rc_map_avermedia_m135a+0x0/0xf returned 0 after 2 usecs calling init_rc_map_avermedia_m733a_rm_k6+0x0/0xf @ 1 initcall init_rc_map_avermedia_m733a_rm_k6+0x0/0xf returned 0 after 1 usecs calling init_rc_map_avermedia_rm_ks+0x0/0xf @ 1 initcall init_rc_map_avermedia_rm_ks+0x0/0xf returned 0 after 2 usecs calling init_rc_map_avertv_303+0x0/0xf @ 1 initcall init_rc_map_avertv_303+0x0/0xf returned 0 after 1 usecs calling init_rc_map_azurewave_ad_tu700+0x0/0xf @ 1 initcall init_rc_map_azurewave_ad_tu700+0x0/0xf returned 0 after 1 usecs calling init_rc_map_behold+0x0/0xf @ 1 initcall init_rc_map_behold+0x0/0xf returned 0 after 1 usecs calling init_rc_map_behold_columbus+0x0/0xf @ 1 initcall init_rc_map_behold_columbus+0x0/0xf returned 0 after 1 usecs calling init_rc_map_budget_ci_old+0x0/0xf @ 1 initcall init_rc_map_budget_ci_old+0x0/0xf returned 0 after 1 usecs calling init_rc_map_cinergy_1400+0x0/0xf @ 1 initcall init_rc_map_cinergy_1400+0x0/0xf returned 0 after 1 usecs calling init_rc_map_cinergy+0x0/0xf @ 1 initcall init_rc_map_cinergy+0x0/0xf returned 0 after 1 usecs calling init_rc_map+0x0/0xf @ 1 initcall init_rc_map+0x0/0xf returned 0 after 2 usecs calling init_rc_map+0x0/0xf @ 1 initcall init_rc_map+0x0/0xf returned 0 after 1 usecs calling init_rc_map_digitalnow_tinytwin+0x0/0xf @ 1 initcall init_rc_map_digitalnow_tinytwin+0x0/0xf returned 0 after 1 usecs calling init_rc_map_digittrade+0x0/0xf @ 1 initcall init_rc_map_digittrade+0x0/0xf returned 0 after 1 usecs calling init_rc_map_dm1105_nec+0x0/0xf @ 1 initcall init_rc_map_dm1105_nec+0x0/0xf returned 0 after 1 usecs calling init_rc_map_dntv_live_dvb_t+0x0/0xf @ 1 initcall init_rc_map_dntv_live_dvb_t+0x0/0xf returned 0 after 1 usecs calling init_rc_map_dntv_live_dvbt_pro+0x0/0xf @ 1 initcall init_rc_map_dntv_live_dvbt_pro+0x0/0xf returned 0 after 1 usecs calling init_rc_map_em_terratec+0x0/0xf @ 1 initcall init_rc_map_em_terratec+0x0/0xf returned 0 after 1 usecs calling init_rc_map_encore_enltv2+0x0/0xf @ 1 initcall init_rc_map_encore_enltv2+0x0/0xf returned 0 after 1 usecs calling init_rc_map_encore_enltv+0x0/0xf @ 1 initcall init_rc_map_encore_enltv+0x0/0xf returned 0 after 1 usecs calling init_rc_map_encore_enltv_fm53+0x0/0xf @ 1 initcall init_rc_map_encore_enltv_fm53+0x0/0xf returned 0 after 1 usecs calling init_rc_map_evga_indtube+0x0/0xf @ 1 initcall init_rc_map_evga_indtube+0x0/0xf returned 0 after 1 usecs calling init_rc_map_eztv+0x0/0xf @ 1 initcall init_rc_map_eztv+0x0/0xf returned 0 after 1 usecs calling init_rc_map_flydvb+0x0/0xf @ 1 initcall init_rc_map_flydvb+0x0/0xf returned 0 after 1 usecs calling init_rc_map_flyvideo+0x0/0xf @ 1 initcall init_rc_map_flyvideo+0x0/0xf returned 0 after 2 usecs calling init_rc_map_fusionhdtv_mce+0x0/0xf @ 1 initcall init_rc_map_fusionhdtv_mce+0x0/0xf returned 0 after 1 usecs calling init_rc_map_gadmei_rm008z+0x0/0xf @ 1 initcall init_rc_map_gadmei_rm008z+0x0/0xf returned 0 after 1 usecs calling init_rc_map_genius_tvgo_a11mce+0x0/0xf @ 1 initcall init_rc_map_genius_tvgo_a11mce+0x0/0xf returned 0 after 1 usecs calling init_rc_map_gotview7135+0x0/0xf @ 1 initcall init_rc_map_gotview7135+0x0/0xf returned 0 after 2 usecs calling init_rc_map_imon_mce+0x0/0xf @ 1 initcall init_rc_map_imon_mce+0x0/0xf returned 0 after 1 usecs calling init_rc_map_imon_pad+0x0/0xf @ 1 initcall init_rc_map_imon_pad+0x0/0xf returned 0 after 1 usecs calling init_rc_map_iodata_bctv7e+0x0/0xf @ 1 initcall init_rc_map_iodata_bctv7e+0x0/0xf returned 0 after 1 usecs calling init_rc_map_kaiomy+0x0/0xf @ 1 initcall init_rc_map_kaiomy+0x0/0xf returned 0 after 1 usecs calling init_rc_map_kworld_315u+0x0/0xf @ 1 initcall init_rc_map_kworld_315u+0x0/0xf returned 0 after 1 usecs calling init_rc_map_kworld_plus_tv_analog+0x0/0xf @ 1 initcall init_rc_map_kworld_plus_tv_analog+0x0/0xf returned 0 after 1 usecs calling init_rc_map_leadtek_y04g0051+0x0/0xf @ 1 initcall init_rc_map_leadtek_y04g0051+0x0/0xf returned 0 after 1 usecs calling init_rc_map_lirc+0x0/0xf @ 1 initcall init_rc_map_lirc+0x0/0xf returned 0 after 1 usecs calling init_rc_lme2510_map+0x0/0xf @ 1 initcall init_rc_lme2510_map+0x0/0xf returned 0 after 1 usecs calling init_rc_map_manli+0x0/0xf @ 1 initcall init_rc_map_manli+0x0/0xf returned 0 after 1 usecs calling init_rc_map_msi_digivox_ii+0x0/0xf @ 1 initcall init_rc_map_msi_digivox_ii+0x0/0xf returned 0 after 1 usecs calling init_rc_map_msi_digivox_iii+0x0/0xf @ 1 initcall init_rc_map_msi_digivox_iii+0x0/0xf returned 0 after 1 usecs calling init_rc_map_msi_tvanywhere+0x0/0xf @ 1 initcall init_rc_map_msi_tvanywhere+0x0/0xf returned 0 after 1 usecs calling init_rc_map_msi_tvanywhere_plus+0x0/0xf @ 1 initcall init_rc_map_msi_tvanywhere_plus+0x0/0xf returned 0 after 2 usecs calling init_rc_map_nebula+0x0/0xf @ 1 initcall init_rc_map_nebula+0x0/0xf returned 0 after 1 usecs calling init_rc_map_nec_terratec_cinergy_xs+0x0/0xf @ 1 initcall init_rc_map_nec_terratec_cinergy_xs+0x0/0xf returned 0 after 1 usecs calling init_rc_map_norwood+0x0/0xf @ 1 initcall init_rc_map_norwood+0x0/0xf returned 0 after 1 usecs calling init_rc_map_npgtech+0x0/0xf @ 1 initcall init_rc_map_npgtech+0x0/0xf returned 0 after 1 usecs calling init_rc_map_pctv_sedna+0x0/0xf @ 1 initcall init_rc_map_pctv_sedna+0x0/0xf returned 0 after 1 usecs calling init_rc_map_pinnacle_color+0x0/0xf @ 1 initcall init_rc_map_pinnacle_color+0x0/0xf returned 0 after 2 usecs calling init_rc_map_pinnacle_grey+0x0/0xf @ 1 initcall init_rc_map_pinnacle_grey+0x0/0xf returned 0 after 1 usecs calling init_rc_map_pinnacle_pctv_hd+0x0/0xf @ 1 initcall init_rc_map_pinnacle_pctv_hd+0x0/0xf returned 0 after 1 usecs calling init_rc_map_pixelview+0x0/0xf @ 1 initcall init_rc_map_pixelview+0x0/0xf returned 0 after 1 usecs calling init_rc_map_pixelview+0x0/0xf @ 1 initcall init_rc_map_pixelview+0x0/0xf returned 0 after 1 usecs calling init_rc_map_pixelview+0x0/0xf @ 1 initcall init_rc_map_pixelview+0x0/0xf returned 0 after 1 usecs calling init_rc_map_pixelview_new+0x0/0xf @ 1 initcall init_rc_map_pixelview_new+0x0/0xf returned 0 after 1 usecs calling init_rc_map_powercolor_real_angel+0x0/0xf @ 1 initcall init_rc_map_powercolor_real_angel+0x0/0xf returned 0 after 1 usecs calling init_rc_map_proteus_2309+0x0/0xf @ 1 initcall init_rc_map_proteus_2309+0x0/0xf returned 0 after 2 usecs calling init_rc_map_purpletv+0x0/0xf @ 1 initcall init_rc_map_purpletv+0x0/0xf returned 0 after 2 usecs calling init_rc_map_pv951+0x0/0xf @ 1 initcall init_rc_map_pv951+0x0/0xf returned 0 after 1 usecs calling init_rc_map_rc5_hauppauge_new+0x0/0xf @ 1 initcall init_rc_map_rc5_hauppauge_new+0x0/0xf returned 0 after 1 usecs calling init_rc_map_rc6_mce+0x0/0xf @ 1 initcall init_rc_map_rc6_mce+0x0/0xf returned 0 after 1 usecs calling init_rc_map_real_audio_220_32_keys+0x0/0xf @ 1 initcall init_rc_map_real_audio_220_32_keys+0x0/0xf returned 0 after 1 usecs calling init_rc_map_streamzap+0x0/0xf @ 1 initcall init_rc_map_streamzap+0x0/0xf returned 0 after 1 usecs calling init_rc_map_tbs_nec+0x0/0xf @ 1 initcall init_rc_map_tbs_nec+0x0/0xf returned 0 after 1 usecs calling init_rc_map+0x0/0xf @ 1 initcall init_rc_map+0x0/0xf returned 0 after 1 usecs calling init_rc_map_terratec_cinergy_xs+0x0/0xf @ 1 initcall init_rc_map_terratec_cinergy_xs+0x0/0xf returned 0 after 1 usecs calling init_rc_map_terratec_slim+0x0/0xf @ 1 initcall init_rc_map_terratec_slim+0x0/0xf returned 0 after 2 usecs calling init_rc_map_terratec_slim_2+0x0/0xf @ 1 initcall init_rc_map_terratec_slim_2+0x0/0xf returned 0 after 1 usecs calling init_rc_map_tevii_nec+0x0/0xf @ 1 initcall init_rc_map_tevii_nec+0x0/0xf returned 0 after 1 usecs calling init_rc_map_total_media_in_hand+0x0/0xf @ 1 initcall init_rc_map_total_media_in_hand+0x0/0xf returned 0 after 1 usecs calling init_rc_map_trekstor+0x0/0xf @ 1 initcall init_rc_map_trekstor+0x0/0xf returned 0 after 1 usecs calling init_rc_map_tt_1500+0x0/0xf @ 1 initcall init_rc_map_tt_1500+0x0/0xf returned 0 after 1 usecs calling init_rc_map_twinhan_vp1027+0x0/0xf @ 1 initcall init_rc_map_twinhan_vp1027+0x0/0xf returned 0 after 1 usecs calling init_rc_map_videomate_m1f+0x0/0xf @ 1 initcall init_rc_map_videomate_m1f+0x0/0xf returned 0 after 1 usecs calling init_rc_map_videomate_s350+0x0/0xf @ 1 initcall init_rc_map_videomate_s350+0x0/0xf returned 0 after 1 usecs calling init_rc_map_videomate_tv_pvr+0x0/0xf @ 1 initcall init_rc_map_videomate_tv_pvr+0x0/0xf returned 0 after 1 usecs input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 calling init_rc_map_winfast+0x0/0xf @ 1 initcall init_rc_map_winfast+0x0/0xf returned 0 after 1 usecs calling init_rc_map_winfast_usbii_deluxe+0x0/0xf @ 1 initcall init_rc_map_winfast_usbii_deluxe+0x0/0xf returned 0 after 2 usecs calling rc_core_init+0x0/0x3d @ 1 initcall rc_core_init+0x0/0x3d returned 0 after 65 usecs calling lirc_dev_init+0x0/0x84 @ 1 lirc_dev: IR Remote Control driver registered, major 241 initcall lirc_dev_init+0x0/0x84 returned 0 after 5063 usecs calling ir_nec_decode_init+0x0/0x1e @ 1 IR NEC protocol handler initialized initcall ir_nec_decode_init+0x0/0x1e returned 0 after 3156 usecs calling ir_rc5_decode_init+0x0/0x1e @ 1 IR RC5(x) protocol handler initialized initcall ir_rc5_decode_init+0x0/0x1e returned 0 after 3411 usecs calling ir_rc6_decode_init+0x0/0x1e @ 1 IR RC6 protocol handler initialized initcall ir_rc6_decode_init+0x0/0x1e returned 0 after 3157 usecs calling ir_jvc_decode_init+0x0/0x1e @ 1 IR JVC protocol handler initialized initcall ir_jvc_decode_init+0x0/0x1e returned 0 after 3167 usecs calling ir_sony_decode_init+0x0/0x1e @ 1 IR Sony protocol handler initialized initcall ir_sony_decode_init+0x0/0x1e returned 0 after 3245 usecs calling ir_rc5_sz_decode_init+0x0/0x1e @ 1 IR RC5 (streamzap) protocol handler initialized initcall ir_rc5_sz_decode_init+0x0/0x1e returned 0 after 4173 usecs calling ir_lirc_codec_init+0x0/0x1e @ 1 IR LIRC bridge handler initialized initcall ir_lirc_codec_init+0x0/0x1e returned 0 after 3073 usecs calling videodev_init+0x0/0x7f @ 1 Linux video capture interface: v2.00 initcall videodev_init+0x0/0x7f returned 0 after 3287 usecs calling ir_init+0x0/0x11 @ 1 initcall ir_init+0x0/0x11 returned 0 after 54 usecs calling linear_init+0x0/0xf @ 1 md: linear personality registered for level -1 initcall linear_init+0x0/0xf returned 0 after 4086 usecs calling raid0_init+0x0/0xf @ 1 md: raid0 personality registered for level 0 initcall raid0_init+0x0/0xf returned 0 after 3919 usecs calling raid_init+0x0/0xf @ 1 md: raid1 personality registered for level 1 initcall raid_init+0x0/0xf returned 0 after 3919 usecs calling raid_init+0x0/0xf @ 1 md: raid10 personality registered for level 10 initcall raid_init+0x0/0xf returned 0 after 4088 usecs calling raid5_init+0x0/0x25 @ 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 initcall raid5_init+0x0/0x25 returned 0 after 11754 usecs calling multipath_init+0x0/0xf @ 1 md: multipath personality registered for level -4 initcall multipath_init+0x0/0xf returned 0 after 4343 usecs calling raid_init+0x0/0xf @ 1 md: faulty personality registered for level -5 initcall raid_init+0x0/0xf returned 0 after 4088 usecs calling dm_init+0x0/0x30 @ 1 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com initcall dm_init+0x0/0x30 returned 0 after 10697 usecs calling dm_crypt_init+0x0/0x69 @ 1 initcall dm_crypt_init+0x0/0x69 returned 0 after 24 usecs calling dm_flakey_init+0x0/0x2e @ 1 initcall dm_flakey_init+0x0/0x2e returned 0 after 2 usecs calling dm_multipath_init+0x0/0x133 @ 1 device-mapper: multipath: version 1.3.0 loaded initcall dm_multipath_init+0x0/0x133 returned 0 after 4167 usecs calling dm_rr_init+0x0/0x3a @ 1 device-mapper: multipath round-robin: version 1.0.0 loaded initcall dm_rr_init+0x0/0x3a returned 0 after 5112 usecs calling dm_snapshot_init+0x0/0x1fc @ 1 initcall dm_snapshot_init+0x0/0x1fc returned 0 after 105 usecs calling dm_mirror_init+0x0/0x77 @ 1 initcall dm_mirror_init+0x0/0x77 returned 0 after 120 usecs calling dm_dirty_log_init+0x0/0x4b @ 1 initcall dm_dirty_log_init+0x0/0x4b returned 0 after 1 usecs calling dm_zero_init+0x0/0x2e @ 1 initcall dm_zero_init+0x0/0x2e returned 0 after 1 usecs calling edac_init+0x0/0x6c @ 1 EDAC MC: Ver: 2.1.0 May 4 2011 initcall edac_init+0x0/0x6c returned 0 after 2963 usecs calling pci_eisa_init_module+0x0/0x16 @ 1 initcall pci_eisa_init_module+0x0/0x16 returned 0 after 105 usecs calling virtual_eisa_root_init+0x0/0x4d @ 1 EISA: Probing bus 0 at eisa.0 EISA: Cannot allocate resource for mainboard Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 2 Cannot allocate resource for EISA slot 3 Cannot allocate resource for EISA slot 4 Cannot allocate resource for EISA slot 5 Cannot allocate resource for EISA slot 6 Cannot allocate resource for EISA slot 7 Cannot allocate resource for EISA slot 8 EISA: Detected 0 cards. initcall virtual_eisa_root_init+0x0/0x4d returned 0 after 37460 usecs calling cpufreq_stats_init+0x0/0x84 @ 1 initcall cpufreq_stats_init+0x0/0x84 returned 0 after 5 usecs calling cpufreq_gov_powersave_init+0x0/0xf @ 1 initcall cpufreq_gov_powersave_init+0x0/0xf returned 0 after 2 usecs calling cpufreq_gov_userspace_init+0x0/0xf @ 1 initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 1 usecs calling cpufreq_gov_dbs_init+0x0/0x20 @ 1 initcall cpufreq_gov_dbs_init+0x0/0x20 returned 0 after 1 usecs calling cpufreq_gov_dbs_init+0x0/0xf @ 1 initcall cpufreq_gov_dbs_init+0x0/0xf returned 0 after 2 usecs calling init_ladder+0x0/0xf @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0xf returned 0 after 2736 usecs calling ioat_init_module+0x0/0x7a @ 1 ioatdma: Intel(R) QuickData Technology Driver 4.00 initcall ioat_init_module+0x0/0x7a returned 0 after 4526 usecs calling td_init+0x0/0xf @ 1 initcall td_init+0x0/0xf returned 0 after 55 usecs calling pch_dma_init+0x0/0x16 @ 1 initcall pch_dma_init+0x0/0x16 returned 0 after 84 usecs calling mmc_blk_init+0x0/0x6d @ 1 initcall mmc_blk_init+0x0/0x6d returned 0 after 45 usecs calling mmc_test_init+0x0/0xf @ 1 initcall mmc_test_init+0x0/0xf returned 0 after 44 usecs calling sdio_uart_init+0x0/0xc3 @ 1 initcall sdio_uart_init+0x0/0xc3 returned 0 after 51 usecs calling sdhci_drv_init+0x0/0x20 @ 1 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman initcall sdhci_drv_init+0x0/0x20 returned 0 after 7752 usecs calling sdhci_drv_init+0x0/0x16 @ 1 initcall sdhci_drv_init+0x0/0x16 returned 0 after 83 usecs calling wbsd_drv_init+0x0/0x9d @ 1 wbsd: Winbond W83L51xD SD/MMC card interface driver wbsd: Copyright(c) Pierre Ossman initcall wbsd_drv_init+0x0/0x9d returned 0 after 7465 usecs calling tifm_sd_init+0x0/0xf @ 1 initcall tifm_sd_init+0x0/0xf returned 0 after 45 usecs calling sdricoh_drv_init+0x0/0xf @ 1 initcall sdricoh_drv_init+0x0/0xf returned 0 after 48 usecs calling cb710_mmc_init_module+0x0/0xf @ 1 initcall cb710_mmc_init_module+0x0/0xf returned 0 after 48 usecs calling via_sd_drv_init+0x0/0x23 @ 1 via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc. initcall via_sd_drv_init+0x0/0x23 returned 0 after 6370 usecs calling ushc_init+0x0/0x16 @ 1 usbcore: registered new interface driver ushc initcall ushc_init+0x0/0x16 returned 0 after 4094 usecs calling sdhci_drv_init+0x0/0xf @ 1 initcall sdhci_drv_init+0x0/0xf returned 0 after 50 usecs calling sdhci_of_init+0x0/0xf @ 1 initcall sdhci_of_init+0x0/0xf returned 0 after 49 usecs calling memstick_init+0x0/0x78 @ 1 initcall memstick_init+0x0/0x78 returned 0 after 121 usecs calling mspro_block_init+0x0/0x6c @ 1 initcall mspro_block_init+0x0/0x6c returned 0 after 47 usecs calling tifm_ms_init+0x0/0xf @ 1 initcall tifm_ms_init+0x0/0xf returned 0 after 45 usecs calling jmb38x_ms_init+0x0/0x16 @ 1 initcall jmb38x_ms_init+0x0/0x16 returned 0 after 92 usecs calling r592_module_init+0x0/0x16 @ 1 initcall r592_module_init+0x0/0x16 returned 0 after 81 usecs calling dmi_sysfs_init+0x0/0x7c @ 1 initcall dmi_sysfs_init+0x0/0x7c returned 0 after 482 usecs calling ibft_init+0x0/0x2f5 @ 1 No iBFT detected. initcall ibft_init+0x0/0x2f5 returned 0 after 1632 usecs calling init_hrt_clocksource+0x0/0x139 @ 1 initcall init_hrt_clocksource+0x0/0x139 returned -19 after 2 usecs calling hid_init+0x0/0x5a @ 1 initcall hid_init+0x0/0x5a returned 0 after 95 usecs calling mmm_init+0x0/0x16 @ 1 initcall mmm_init+0x0/0x16 returned 0 after 63 usecs calling a4_init+0x0/0x16 @ 1 initcall a4_init+0x0/0x16 returned 0 after 59 usecs calling apple_init+0x0/0x2e @ 1 initcall apple_init+0x0/0x2e returned 0 after 61 usecs calling belkin_init+0x0/0x16 @ 1 initcall belkin_init+0x0/0x16 returned 0 after 59 usecs calling cando_init+0x0/0x16 @ 1 initcall cando_init+0x0/0x16 returned 0 after 60 usecs calling ch_init+0x0/0x16 @ 1 initcall ch_init+0x0/0x16 returned 0 after 59 usecs calling ch_init+0x0/0x16 @ 1 initcall ch_init+0x0/0x16 returned 0 after 62 usecs calling cp_init+0x0/0x16 @ 1 initcall cp_init+0x0/0x16 returned 0 after 76 usecs calling dr_init+0x0/0x16 @ 1 initcall dr_init+0x0/0x16 returned 0 after 59 usecs calling ez_init+0x0/0x16 @ 1 initcall ez_init+0x0/0x16 returned 0 after 59 usecs calling gyration_init+0x0/0x16 @ 1 initcall gyration_init+0x0/0x16 returned 0 after 59 usecs calling ks_init+0x0/0x16 @ 1 initcall ks_init+0x0/0x16 returned 0 after 60 usecs calling keytouch_init+0x0/0x16 @ 1 initcall keytouch_init+0x0/0x16 returned 0 after 58 usecs calling kye_init+0x0/0x16 @ 1 initcall kye_init+0x0/0x16 returned 0 after 60 usecs calling ts_init+0x0/0x16 @ 1 initcall ts_init+0x0/0x16 returned 0 after 60 usecs calling lg_init+0x0/0x16 @ 1 initcall lg_init+0x0/0x16 returned 0 after 60 usecs calling ms_init+0x0/0x16 @ 1 initcall ms_init+0x0/0x16 returned 0 after 60 usecs calling mr_init+0x0/0x16 @ 1 initcall mr_init+0x0/0x16 returned 0 after 60 usecs calling mosart_init+0x0/0x16 @ 1 initcall mosart_init+0x0/0x16 returned 0 after 60 usecs calling mt_init+0x0/0x16 @ 1 initcall mt_init+0x0/0x16 returned 0 after 60 usecs calling ntrig_init+0x0/0x16 @ 1 initcall ntrig_init+0x0/0x16 returned 0 after 62 usecs calling ortek_init+0x0/0x16 @ 1 initcall ortek_init+0x0/0x16 returned 0 after 60 usecs calling quanta_init+0x0/0x16 @ 1 initcall quanta_init+0x0/0x16 returned 0 after 60 usecs calling pl_init+0x0/0x16 @ 1 initcall pl_init+0x0/0x16 returned 0 after 64 usecs calling pl_init+0x0/0x16 @ 1 initcall pl_init+0x0/0x16 returned 0 after 62 usecs calling roccat_init+0x0/0x66 @ 1 initcall roccat_init+0x0/0x66 returned 0 after 3 usecs calling arvo_init+0x0/0x57 @ 1 initcall arvo_init+0x0/0x57 returned 0 after 104 usecs calling kone_init+0x0/0x57 @ 1 initcall kone_init+0x0/0x57 returned 0 after 107 usecs calling koneplus_init+0x0/0x57 @ 1 initcall koneplus_init+0x0/0x57 returned 0 after 103 usecs calling kovaplus_init+0x0/0x57 @ 1 initcall kovaplus_init+0x0/0x57 returned 0 after 105 usecs calling pyra_init+0x0/0x57 @ 1 initcall pyra_init+0x0/0x57 returned 0 after 103 usecs calling samsung_init+0x0/0x16 @ 1 initcall samsung_init+0x0/0x16 returned 0 after 62 usecs calling sjoy_init+0x0/0x16 @ 1 initcall sjoy_init+0x0/0x16 returned 0 after 62 usecs calling sony_init+0x0/0x16 @ 1 initcall sony_init+0x0/0x16 returned 0 after 74 usecs calling stantum_init+0x0/0x16 @ 1 initcall stantum_init+0x0/0x16 returned 0 after 61 usecs calling sp_init+0x0/0x16 @ 1 initcall sp_init+0x0/0x16 returned 0 after 60 usecs calling ga_init+0x0/0x16 @ 1 initcall ga_init+0x0/0x16 returned 0 after 65 usecs calling tm_init+0x0/0x16 @ 1 initcall tm_init+0x0/0x16 returned 0 after 61 usecs calling ts_init+0x0/0x16 @ 1 initcall ts_init+0x0/0x16 returned 0 after 62 usecs calling twinhan_init+0x0/0x16 @ 1 initcall twinhan_init+0x0/0x16 returned 0 after 76 usecs calling uclogic_init+0x0/0x16 @ 1 initcall uclogic_init+0x0/0x16 returned 0 after 69 usecs calling zp_init+0x0/0x16 @ 1 initcall zp_init+0x0/0x16 returned 0 after 60 usecs calling waltop_init+0x0/0x16 @ 1 initcall waltop_init+0x0/0x16 returned 0 after 61 usecs calling hid_init+0x0/0x66 @ 1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver initcall hid_init+0x0/0x66 returned 0 after 6796 usecs calling staging_init+0x0/0x7 @ 1 initcall staging_init+0x0/0x7 returned 0 after 1 usecs calling smtcfb_init+0x0/0x16 @ 1 initcall smtcfb_init+0x0/0x16 returned 0 after 82 usecs calling xgifb_init+0x0/0x373 @ 1 XGIfb: Options (null) initcall xgifb_init+0x0/0x373 returned 0 after 2058 usecs calling quickstart_init+0x0/0x18e @ 1 initcall quickstart_init+0x0/0x18e returned -19 after 115 usecs calling asus_wmi_init+0x0/0x35 @ 1 asus_wmi: Asus Management GUID not found initcall asus_wmi_init+0x0/0x35 returned -19 after 3418 usecs calling asus_nb_wmi_init+0x0/0xf @ 1 asus_wmi: Management GUID not found initcall asus_nb_wmi_init+0x0/0xf returned -19 after 3396 usecs calling eeepc_laptop_init+0x0/0x4d @ 1 initcall eeepc_laptop_init+0x0/0x4d returned -19 after 190 usecs calling eeepc_wmi_init+0x0/0xf @ 1 asus_wmi: Management GUID not found initcall eeepc_wmi_init+0x0/0xf returned -19 after 3382 usecs calling msi_init+0x0/0x422 @ 1 msi_laptop: driver 0.5 successfully loaded. initcall msi_init+0x0/0x422 returned 0 after 4129 usecs calling cmpc_init+0x0/0x6c @ 1 initcall cmpc_init+0x0/0x6c returned 0 after 242 usecs calling compal_init+0x0/0x1b8 @ 1 compal-laptop: Motherboard not recognized (You could try the module's force-parameter) initcall compal_init+0x0/0x1b8 returned -19 after 7312 usecs calling dell_wmi_init+0x0/0x183 @ 1 dell-wmi: No known WMI GUID found initcall dell_wmi_init+0x0/0x183 returned -19 after 2987 usecs calling dell_wmi_aio_init+0x0/0xe7 @ 1 dell_wmi_aio: No known WMI GUID found initcall dell_wmi_aio_init+0x0/0xe7 returned -6 after 3327 usecs initcall dell_wmi_aio_init+0x0/0xe7 returned with error code -6 calling acer_wmi_init+0x0/0x6cf @ 1 acer_wmi: Acer Laptop ACPI-WMI Extras acer_wmi: No or unsupported WMI interface, unable to load initcall acer_wmi_init+0x0/0x6cf returned -19 after 8354 usecs calling acerhdf_init+0x0/0x268 @ 1 acerhdf: Acer Aspire One Fan driver, v.0.5.24 acerhdf: unknown (unsupported) BIOS version System manufacturer/System Product Name/ASUS A8N-E ACPI BIOS Revision 1008, please report, aborting! initcall acerhdf_init+0x0/0x268 returned -22 after 16402 usecs initcall acerhdf_init+0x0/0x268 returned with error code -22 calling lis3lv02d_init_module+0x0/0x30 @ 1 hp_accel: driver loaded initcall lis3lv02d_init_module+0x0/0x30 returned 0 after 2211 usecs calling hp_wmi_init+0x0/0x1a6 @ 1 initcall hp_wmi_init+0x0/0x1a6 returned -19 after 3 usecs calling tc1100_init+0x0/0x78 @ 1 initcall tc1100_init+0x0/0x78 returned -19 after 1 usecs calling sony_laptop_init+0x0/0x79 @ 1 initcall sony_laptop_init+0x0/0x79 returned 0 after 58 usecs calling ideapad_acpi_module_init+0x0/0xf @ 1 initcall ideapad_acpi_module_init+0x0/0xf returned 0 after 72 usecs calling thinkpad_acpi_module_init+0x0/0xb51 @ 1 initcall thinkpad_acpi_module_init+0x0/0xb51 returned -19 after 7 usecs calling hdaps_init+0x0/0x1eb @ 1 hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! initcall hdaps_init+0x0/0x1eb returned -19 after 6331 usecs calling fujitsu_init+0x0/0x25d @ 1 fujitsu-laptop: driver 0.6.0 successfully loaded. initcall fujitsu_init+0x0/0x25d returned 0 after 4644 usecs calling acpi_pcc_init+0x0/0x23 @ 1 initcall acpi_pcc_init+0x0/0x23 returned 0 after 61 usecs calling intel_menlow_module_init+0x0/0x8f @ 1 initcall intel_menlow_module_init+0x0/0x8f returned -19 after 6 usecs calling msi_wmi_init+0x0/0x146 @ 1 This machine doesn't have MSI-hotkeys through WMI initcall msi_wmi_init+0x0/0x146 returned -19 after 4348 usecs calling asus_acpi_init+0x0/0xdc @ 1 initcall asus_acpi_init+0x0/0xdc returned -19 after 103 usecs calling topstar_laptop_init+0x0/0x22 @ 1 Topstar Laptop ACPI extras driver loaded initcall topstar_laptop_init+0x0/0x22 returned 0 after 3644 usecs calling toshiba_acpi_init+0x0/0x399 @ 1 initcall toshiba_acpi_init+0x0/0x399 returned -19 after 4 usecs calling toshiba_bt_rfkill_init+0x0/0x1a @ 1 initcall toshiba_bt_rfkill_init+0x0/0x1a returned 0 after 58 usecs calling ips_init+0x0/0x16 @ 1 initcall ips_init+0x0/0x16 returned 0 after 91 usecs calling xo1_rfkill_init+0x0/0xf @ 1 initcall xo1_rfkill_init+0x0/0xf returned 0 after 49 usecs calling xo15_ebook_init+0x0/0xf @ 1 initcall xo15_ebook_init+0x0/0xf returned 0 after 59 usecs calling ibm_rtl_init+0x0/0x267 @ 1 initcall ibm_rtl_init+0x0/0x267 returned -19 after 2 usecs calling samsung_init+0x0/0x5b9 @ 1 initcall samsung_init+0x0/0x5b9 returned -19 after 8 usecs calling oprofile_init+0x0/0x3c @ 1 oprofile: using NMI interrupt. initcall oprofile_init+0x0/0x3c returned 0 after 2755 usecs calling flow_cache_init_global+0x0/0x10f @ 1 initcall flow_cache_init_global+0x0/0x10f returned 0 after 56 usecs calling llc_init+0x0/0x1b @ 1 initcall llc_init+0x0/0x1b returned 0 after 1 usecs calling snap_init+0x0/0x33 @ 1 initcall snap_init+0x0/0x33 returned 0 after 3 usecs calling rif_init+0x0/0x6e @ 1 initcall rif_init+0x0/0x6e returned 0 after 22 usecs calling blackhole_module_init+0x0/0xf @ 1 initcall blackhole_module_init+0x0/0xf returned 0 after 2 usecs calling police_init_module+0x0/0xf @ 1 initcall police_init_module+0x0/0xf returned 0 after 1 usecs calling sysctl_ipv4_init+0x0/0x71 @ 1 initcall sysctl_ipv4_init+0x0/0x71 returned 0 after 298 usecs calling ipip_init+0x0/0x52 @ 1 IPv4 over IPv4 tunneling driver initcall ipip_init+0x0/0x52 returned 0 after 3214 usecs calling init_syncookies+0x0/0x16 @ 1 initcall init_syncookies+0x0/0x16 returned 0 after 41 usecs calling tunnel4_init+0x0/0x5e @ 1 initcall tunnel4_init+0x0/0x5e returned 0 after 2 usecs calling ipv4_netfilter_init+0x0/0x14 @ 1 initcall ipv4_netfilter_init+0x0/0x14 returned 0 after 2 usecs calling inet_diag_init+0x0/0x7c @ 1 initcall inet_diag_init+0x0/0x7c returned 0 after 15 usecs calling tcp_diag_init+0x0/0xf @ 1 initcall tcp_diag_init+0x0/0xf returned 0 after 2 usecs calling cubictcp_register+0x0/0x73 @ 1 TCP cubic registered initcall cubictcp_register+0x0/0x73 returned 0 after 1888 usecs calling xfrm_user_init+0x0/0x41 @ 1 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x41 returned 0 after 2906 usecs calling inet6_init+0x0/0x293 @ 1 NET: Registered protocol family 10 initcall inet6_init+0x0/0x293 returned 0 after 5456 usecs calling packet_init+0x0/0x39 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x39 returned 0 after 3076 usecs calling dsa_init_module+0x0/0x11 @ 1 initcall dsa_init_module+0x0/0x11 returned 0 after 2 usecs calling edsa_init_module+0x0/0x11 @ 1 initcall edsa_init_module+0x0/0x11 returned 0 after 1 usecs calling trailer_init_module+0x0/0x11 @ 1 initcall trailer_init_module+0x0/0x11 returned 0 after 1 usecs calling mv88e6060_init+0x0/0x11 @ 1 initcall mv88e6060_init+0x0/0x11 returned 0 after 2 usecs calling mv88e6123_61_65_init+0x0/0x11 @ 1 initcall mv88e6123_61_65_init+0x0/0x11 returned 0 after 2 usecs calling mv88e6131_init+0x0/0x11 @ 1 initcall mv88e6131_init+0x0/0x11 returned 0 after 1 usecs calling dsa_init_module+0x0/0xf @ 1 initcall dsa_init_module+0x0/0xf returned 0 after 64 usecs calling init_rpcsec_gss+0x0/0x3f @ 1 initcall init_rpcsec_gss+0x0/0x3f returned 0 after 11 usecs calling af_rxrpc_init+0x0/0x181 @ 1 NET: Registered protocol family 33 initcall af_rxrpc_init+0x0/0x181 returned 0 after 3128 usecs calling atm_clip_init+0x0/0xa6 @ 1 initcall atm_clip_init+0x0/0xa6 returned 0 after 33 usecs calling lane_module_init+0x0/0x6b @ 1 lec:lane_module_init: lec.c: May 4 2011 11:12:46 initialized initcall lane_module_init+0x0/0x6b returned 0 after 5366 usecs calling atm_mpoa_init+0x0/0x45 @ 1 mpoa:atm_mpoa_init: mpc.c: May 4 2011 11:12:45 initialized initcall atm_mpoa_init+0x0/0x45 returned 0 after 5197 usecs calling pppoatm_init+0x0/0x11 @ 1 initcall pppoatm_init+0x0/0x11 returned 0 after 7 usecs calling sctp_init+0x0/0x6c2 @ 1 sctp: Hash tables configured (established 65536 bind 65536) initcall sctp_init+0x0/0x6c2 returned 0 after 6272 usecs calling lib80211_init+0x0/0x1c @ 1 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' initcall lib80211_init+0x0/0x1c returned 0 after 8092 usecs calling lib80211_crypto_wep_init+0x0/0xf @ 1 lib80211_crypt: registered algorithm 'WEP' initcall lib80211_crypto_wep_init+0x0/0xf returned 0 after 3758 usecs calling lib80211_crypto_ccmp_init+0x0/0xf @ 1 lib80211_crypt: registered algorithm 'CCMP' initcall lib80211_crypto_ccmp_init+0x0/0xf returned 0 after 3842 usecs calling lib80211_crypto_tkip_init+0x0/0xf @ 1 lib80211_crypt: registered algorithm 'TKIP' initcall lib80211_crypto_tkip_init+0x0/0xf returned 0 after 3845 usecs calling dcbnl_init+0x0/0x4c @ 1 initcall dcbnl_init+0x0/0x4c returned 0 after 2 usecs calling init_dns_resolver+0x0/0x101 @ 1 Registering the dns_resolver key type initcall init_dns_resolver+0x0/0x101 returned 0 after 3339 usecs calling init_ceph_lib+0x0/0x79 @ 1 libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) initcall init_ceph_lib+0x0/0x79 returned 0 after 4698 usecs calling rio_init_mports+0x0/0x57 @ 1 initcall rio_init_mports+0x0/0x57 returned 0 after 2 usecs calling mcheck_debugfs_init+0x0/0x40 @ 1 initcall mcheck_debugfs_init+0x0/0x40 returned 0 after 5 usecs calling severities_debugfs_init+0x0/0x40 @ 1 initcall severities_debugfs_init+0x0/0x40 returned 0 after 4 usecs calling powernowk8_init+0x0/0x180 @ 1 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2 cpu cores) (version 2.20.00) [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [Firmware Bug]: powernow-k8: Try again with latest BIOS. initcall powernowk8_init+0x0/0x180 returned -19 after 19390 usecs calling acpi_cpufreq_init+0x0/0xac @ 1 initcall acpi_cpufreq_init+0x0/0xac returned -5 after 12 usecs initcall acpi_cpufreq_init+0x0/0xac returned with error code -5 calling pcc_cpufreq_init+0x0/0x1ed @ 1 initcall pcc_cpufreq_init+0x0/0x1ed returned -19 after 4 usecs calling powernow_init+0x0/0x11d @ 1 initcall powernow_init+0x0/0x11d returned -19 after 2 usecs calling longhaul_init+0x0/0x81 @ 1 initcall longhaul_init+0x0/0x81 returned -19 after 1 usecs calling centrino_init+0x0/0x27 @ 1 initcall centrino_init+0x0/0x27 returned -19 after 1 usecs calling cpufreq_p4_init+0x0/0x52 @ 1 initcall cpufreq_p4_init+0x0/0x52 returned -19 after 1 usecs calling hpet_insert_resource+0x0/0x1e @ 1 initcall hpet_insert_resource+0x0/0x1e returned 1 after 1 usecs initcall hpet_insert_resource+0x0/0x1e returned with error code 1 calling update_mp_table+0x0/0x3f2 @ 1 initcall update_mp_table+0x0/0x3f2 returned 0 after 2 usecs calling lapic_insert_resource+0x0/0x35 @ 1 initcall lapic_insert_resource+0x0/0x35 returned 0 after 4 usecs calling print_ipi_mode+0x0/0x2d @ 1 Using IPI No-Shortcut mode initcall print_ipi_mode+0x0/0x2d returned 0 after 2394 usecs calling io_apic_bug_finalize+0x0/0x1a @ 1 initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 1 usecs calling check_early_ioremap_leak+0x0/0x54 @ 1 initcall check_early_ioremap_leak+0x0/0x54 returned 0 after 1 usecs calling pat_memtype_list_init+0x0/0x37 @ 1 initcall pat_memtype_list_init+0x0/0x37 returned 0 after 4 usecs calling init_oops_id+0x0/0x3f @ 1 initcall init_oops_id+0x0/0x3f returned 0 after 5 usecs calling printk_late_init+0x0/0x4d @ 1 initcall printk_late_init+0x0/0x4d returned 0 after 4 usecs calling pm_qos_power_init+0x0/0xb3 @ 1 initcall pm_qos_power_init+0x0/0xb3 returned 0 after 359 usecs calling software_resume+0x0/0x190 @ 1 async_waiting @ 1 async_continuing @ 1 after 2 usec initcall software_resume+0x0/0x190 returned -19 after 4648 usecs calling clear_boot_tracer+0x0/0x2d @ 1 initcall clear_boot_tracer+0x0/0x2d returned 0 after 1 usecs calling max_swapfiles_check+0x0/0x7 @ 1 initcall max_swapfiles_check+0x0/0x7 returned 0 after 1 usecs calling set_recommended_min_free_kbytes+0x0/0x6c @ 1 initcall set_recommended_min_free_kbytes+0x0/0x6c returned 0 after 35 usecs calling afs_init+0x0/0x16c @ 1 kAFS: Red Hat AFS client v0.1 registering. FS-Cache: Netfs 'afs' registered for caching initcall afs_init+0x0/0x16c returned 0 after 7900 usecs calling raid6_test+0x0/0xf9 @ 1 raid6test: testing the 4-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q) OK raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q) OK raid6test: testing the 5-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P) OK raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P) OK raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q) OK raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P) OK raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q) OK raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q) OK raid6test: testing the 11-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK raid6test: test_disks(0, 9): faila= 0(D) failb= 9(P) OK raid6test: test_disks(0, 10): faila= 0(D) failb= 10(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK raid6test: test_disks(1, 9): faila= 1(D) failb= 9(P) OK raid6test: test_disks(1, 10): faila= 1(D) failb= 10(Q) OK raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK raid6test: test_disks(2, 9): faila= 2(D) failb= 9(P) OK raid6test: test_disks(2, 10): faila= 2(D) failb= 10(Q) OK raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK raid6test: test_disks(3, 9): faila= 3(D) failb= 9(P) OK raid6test: test_disks(3, 10): faila= 3(D) failb= 10(Q) OK raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK raid6test: test_disks(4, 9): faila= 4(D) failb= 9(P) OK raid6test: test_disks(4, 10): faila= 4(D) failb= 10(Q) OK raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK raid6test: test_disks(5, 9): faila= 5(D) failb= 9(P) OK raid6test: test_disks(5, 10): faila= 5(D) failb= 10(Q) OK raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK raid6test: test_disks(6, 9): faila= 6(D) failb= 9(P) OK raid6test: test_disks(6, 10): faila= 6(D) failb= 10(Q) OK raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK raid6test: test_disks(7, 9): faila= 7(D) failb= 9(P) OK raid6test: test_disks(7, 10): faila= 7(D) failb= 10(Q) OK raid6test: test_disks(8, 9): faila= 8(D) failb= 9(P) OK raid6test: test_disks(8, 10): faila= 8(D) failb= 10(Q) OK raid6test: test_disks(9, 10): faila= 9(P) failb= 10(Q) OK raid6test: testing the 12-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK raid6test: test_disks(0, 10): faila= 0(D) failb= 10(P) OK raid6test: test_disks(0, 11): faila= 0(D) failb= 11(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK raid6test: test_disks(1, 10): faila= 1(D) failb= 10(P) OK raid6test: test_disks(1, 11): faila= 1(D) failb= 11(Q) OK raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK raid6test: test_disks(2, 10): faila= 2(D) failb= 10(P) OK raid6test: test_disks(2, 11): faila= 2(D) failb= 11(Q) OK raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK raid6test: test_disks(3, 10): faila= 3(D) failb= 10(P) OK raid6test: test_disks(3, 11): faila= 3(D) failb= 11(Q) OK raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK raid6test: test_disks(4, 10): faila= 4(D) failb= 10(P) OK raid6test: test_disks(4, 11): faila= 4(D) failb= 11(Q) OK raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK raid6test: test_disks(5, 10): faila= 5(D) failb= 10(P) OK raid6test: test_disks(5, 11): faila= 5(D) failb= 11(Q) OK raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK raid6test: test_disks(6, 10): faila= 6(D) failb= 10(P) OK raid6test: test_disks(6, 11): faila= 6(D) failb= 11(Q) OK raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK raid6test: test_disks(7, 10): faila= 7(D) failb= 10(P) OK raid6test: test_disks(7, 11): faila= 7(D) failb= 11(Q) OK raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK raid6test: test_disks(8, 10): faila= 8(D) failb= 10(P) OK raid6test: test_disks(8, 11): faila= 8(D) failb= 11(Q) OK raid6test: test_disks(9, 10): faila= 9(D) failb= 10(P) OK raid6test: test_disks(9, 11): faila= 9(D) failb= 11(Q) OK raid6test: test_disks(10, 11): faila= 10(P) failb= 11(Q) OK raid6test: testing the 16-disk case... raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D) OK raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D) OK raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D) OK raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D) OK raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P) OK raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q) OK raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D) OK raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D) OK raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D) OK raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D) OK raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P) OK raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q) OK raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D) OK raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D) OK raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D) OK raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D) OK raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P) OK raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q) OK raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D) OK raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D) OK raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D) OK raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D) OK raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P) OK raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q) OK raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D) OK raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D) OK raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D) OK raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D) OK raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P) OK raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q) OK raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D) OK raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D) OK raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D) OK raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D) OK raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P) OK raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q) OK raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D) OK raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D) OK raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D) OK raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D) OK raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P) OK raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q) OK raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D) OK raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D) OK raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D) OK raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D) OK raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P) OK raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q) OK raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D) OK raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D) OK raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D) OK raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D) OK raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P) OK raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q) OK raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D) OK raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D) OK raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D) OK raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D) OK raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P) OK raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q) OK raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D) OK raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D) OK raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D) OK raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P) OK raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q) OK raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D) OK raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D) OK raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P) OK raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q) OK raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D) OK raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P) OK raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q) OK raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P) OK raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q) OK raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q) OK raid6test: raid6test: complete (257 tests, 0 failures) initcall raid6_test+0x0/0xf9 returned 0 after 1401532 usecs calling random32_reseed+0x0/0x7d @ 1 initcall random32_reseed+0x0/0x7d returned 0 after 16 usecs calling pci_resource_alignment_sysfs_init+0x0/0x14 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 4 usecs calling pci_sysfs_init+0x0/0x44 @ 1 initcall pci_sysfs_init+0x0/0x44 returned 0 after 217 usecs calling regulator_init_complete+0x0/0x10d @ 1 initcall regulator_init_complete+0x0/0x10d returned 0 after 2 usecs calling seqgen_init+0x0/0xe @ 1 initcall seqgen_init+0x0/0xe returned 0 after 16 usecs calling hd_init+0x0/0x2d1 @ 1 hd: no drives specified - use hd=cyl,head,sectors on kernel command line initcall hd_init+0x0/0x2d1 returned -1 after 6315 usecs initcall hd_init+0x0/0x2d1 returned with error code -1 calling scsi_complete_async_scans+0x0/0xf6 @ 1 initcall scsi_complete_async_scans+0x0/0xf6 returned 0 after 1 usecs calling edd_init+0x0/0x2be @ 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found initcall edd_init+0x0/0x2be returned 0 after 4652 usecs calling memmap_init+0x0/0x2d @ 1 initcall memmap_init+0x0/0x2d returned 0 after 29 usecs calling pci_mmcfg_late_insert_resources+0x0/0x57 @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0x57 returned 0 after 3 usecs calling tcp_congestion_default+0x0/0xf @ 1 initcall tcp_congestion_default+0x0/0xf returned 0 after 2 usecs calling ip_auto_config+0x0/0xda4 @ 1 initcall ip_auto_config+0x0/0xda4 returned 0 after 11 usecs calling initialize_hashrnd+0x0/0x16 @ 1 initcall initialize_hashrnd+0x0/0x16 returned 0 after 5 usecs async_waiting @ 1 async_continuing @ 1 after 1 usec md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect async_waiting @ 1 async_continuing @ 1 after 1 usec md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs (sda1): recovery required on readonly filesystem EXT3-fs (sda1): write access will be enabled during recovery EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): recovery complete EXT3-fs (sda1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:1. devtmpfs: mounted async_waiting @ 1 async_continuing @ 1 after 2 usec Freeing unused kernel memory: 932k freed modprobe: FATAL: Could not load /lib/modules/2.6.39-rc5-i486-1sys+/modules.dep: No such file or directory INIT: version 2.86 booting Welcome to Fedora Core Press 'I' to enter interactive startup. Setting clock (utc): Wed May 4 22:43:12 CEST 2011 [ OK ] Loading default keymap (us): [ OK ] Setting hostname mercury: [ OK ] md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. DM multipath kernel driver version too old No devices found Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /: clean, 514801/7685440 files, 5466281/7679062 blocks [/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/sda5 /home: recovering journal /home: clean, 145081/6111232 files, 1811574/12209392 blocks [ OK ] Remounting root filesystem in reEXT3-fs (sda1): using internal journal ad-write mode: [ OK ] Mounting local filesystems: mount: mount poiEXT3-fs: barriers not enabled nt /dev/shm doeskjournald starting. Commit interval 5 seconds EXT3-fs (sda5): using internal journal EXT3-fs (sda5): mounted filesystem with ordered data mode not exist [FAILED] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Starting sshd: [ OK ] /etc/rc3.d/S99local: line 9: /proc/sys/kernel/exec-shield: No such file or directory FATAL: Could not load /lib/modules/2.6.39-rc5-i486-1sys+/modules.dep: No such file or directory Adding 3911820k swap on /dev/sda2. Priority:-1 extents:1 across:3911820k Starting Distributed Compiler daemon (distccd): distccd[3243] (dcc_setup_real_log) ERROR: failed to open /var/log/distccd.log: Permission denied [ OK ] /etc/rc3.d/S99local: line 32: /sys/kernel/uids/0/cpu_share: No such file or directory /etc/rc3.d/S99local: line 34: /sys/kernel/uids//cpu_share: No such file or directory NOT testing CPU hotplug modprobe: FATAL: Could not load /lib/modules/2.6.39-rc5-i486-1sys+/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.39-rc5-i486-1sys+/modules.dep: No such file or directory /etc/rc3.d/S99local: line 52: /home/mingo/bin/perf: cannot execute binary file Fedora Core release 6 (Zod) Kernel 2.6.39-rc5-i486-1sys+ on an i686 mercury login: ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host eth0: no IPv6 routers present ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host Fedora Core release 6 (Zod) Kernel 2.6.39-rc5-i486-1sys+ on an i686 mercury login: Fedora Core release 6 (Zod) Kernel 2.6.39-rc5-i486-1sys+ on an i686 mercury login: ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host ssh: connect to host d port 22: No route to host BUG: unable to handle kernel NULL pointer dereference at 00000008 IP: [] generic_make_request+0x86/0x3f4 *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:0a.0/net/eth0/address Modules linked in: Pid: 2969, comm: flush-8:0 Not tainted 2.6.39-rc5-i486-1sys+ #122580 System manufacturer System Product Name/A8N-E EIP: 0060:[] EFLAGS: 00010202 CPU: 1 EIP is at generic_make_request+0x86/0x3f4 EAX: 00000000 EBX: f569e280 ECX: f6a00000 EDX: f5528000 ESI: 00000008 EDI: 00000001 EBP: f5fd7c8c ESP: f5fd7c14 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process flush-8:0 (pid: 2969, ti=f5fd6000 task=f64d0ab0 task.ti=f5fd6000) Stack: f569e280 c10988af f5fd7c84 c1d74030 f6402400 f569e300 00081ddb f569e280 c10988af f5fd7c84 f64d0ab0 0000007b 0000007b 000000d8 00000008 ffffffc1 00000000 00000000 00000246 f6a06c80 055c08fe 00000000 c10988af 00000080 Call Trace: [] ? mempool_alloc_slab+0x13/0x15 [] ? common_interrupt+0x30/0x40 [] ? mempool_alloc_slab+0x13/0x15 [] ? mempool_alloc_slab+0x13/0x15 [] submit_bio+0xcb/0xe4 [] ? inc_zone_page_state+0xe/0x88 [] ? bio_init+0x9/0x2e [] ? bio_alloc_bioset+0x3c/0x9c [] submit_bh+0xc6/0xe0 [] __block_write_full_page+0x20a/0x2df [] ? bio_put+0x8/0x2c [] ? end_buffer_async_read+0xd5/0xd5 [] block_write_full_page_endio+0xc0/0xc8 [] ? end_buffer_async_read+0xd5/0xd5 [] block_write_full_page+0x17/0x19 [] ? end_buffer_async_read+0xd5/0xd5 [] ext3_ordered_writepage+0xc8/0x19c [] ? bput_one+0x10/0x10 [] __writepage+0x10/0x28 [] write_cache_pages+0x1c9/0x283 [] ? bdi_set_max_ratio+0x52/0x52 [] generic_writepages+0x36/0x49 [] do_writepages+0x28/0x2b [] writeback_single_inode+0xa6/0x18d [] writeback_sb_inodes+0xa6/0x10b [] writeback_inodes_wb+0xd9/0xee [] wb_writeback+0x1af/0x26d [] ? try_to_del_timer_sync+0x81/0x89 [] ? local_bh_disable+0x8/0x18 [] wb_do_writeback+0x71/0x181 [] ? add_timer_on+0x95/0x95 [] ? del_timer+0xc/0x86 [] bdi_writeback_thread+0x6e/0x186 [] ? wb_do_writeback+0x181/0x181 [] kthread+0x67/0x6c [] ? kthread_worker_fn+0x114/0x114 [] kernel_thread_helper+0x6/0x10 Code: 00 c7 45 c8 00 00 00 00 8d 55 c8 89 90 f4 02 00 00 89 45 b0 8b 53 20 c1 ea 09 89 55 c0 e8 e3 8c 88 00 83 7d c0 00 74 69 8b 43 0c <8b> 40 08 8b 90 84 00 00 00 f6 c2 01 74 04 f3 90 eb f1 8b 70 7c EIP: [] generic_make_request+0x86/0x3f4 SS:ESP 0068:f5fd7c14 CR2: 0000000000000008 ---[ end trace c45e837de578cd2f ]--- ------------[ cut here ]------------ WARNING: at kernel/exit.c:911 do_exit+0x6c/0x659() Hardware name: System Product Name Modules linked in: Pid: 2969, comm: flush-8:0 Tainted: G D 2.6.39-rc5-i486-1sys+ #122580 Call Trace: [] ? printk+0x1d/0x1f [] warn_slowpath_common+0x7c/0x91 [] ? do_exit+0x6c/0x659 [] ? do_exit+0x6c/0x659 [] warn_slowpath_null+0x22/0x24 [] do_exit+0x6c/0x659 [] ? kmsg_dump+0x3a/0xb7 [] ? printk+0x1d/0x1f [] oops_end+0x85/0x8a [] no_context+0x128/0x130 [] __bad_area_nosemaphore+0x12e/0x136 [] ? native_load_tls+0xa/0x3d [] ? vmalloc_sync_all+0xf0/0xf0 [] bad_area_nosemaphore+0x17/0x19 [] do_page_fault+0x162/0x35c [] ? schedule+0x643/0x6c4 [] ? bio_phys_segments+0x9/0x1c [] ? drive_stat_acct+0xc/0x104 [] ? vmalloc_sync_all+0xf0/0xf0 [] error_code+0x67/0x70 [] ? generic_make_request+0x86/0x3f4 [] ? mempool_alloc_slab+0x13/0x15 [] ? common_interrupt+0x30/0x40 [] ? mempool_alloc_slab+0x13/0x15 [] ? mempool_alloc_slab+0x13/0x15 [] submit_bio+0xcb/0xe4 [] ? inc_zone_page_state+0xe/0x88 [] ? bio_init+0x9/0x2e [] ? bio_alloc_bioset+0x3c/0x9c [] submit_bh+0xc6/0xe0 [] __block_write_full_page+0x20a/0x2df [] ? bio_put+0x8/0x2c [] ? end_buffer_async_read+0xd5/0xd5 [] block_write_full_page_endio+0xc0/0xc8 [] ? end_buffer_async_read+0xd5/0xd5 [] block_write_full_page+0x17/0x19 [] ? end_buffer_async_read+0xd5/0xd5 [] ext3_ordered_writepage+0xc8/0x19c [] ? bput_one+0x10/0x10 [] __writepage+0x10/0x28 [] write_cache_pages+0x1c9/0x283 [] ? bdi_set_max_ratio+0x52/0x52 [] generic_writepages+0x36/0x49 [] do_writepages+0x28/0x2b [] writeback_single_inode+0xa6/0x18d [] writeback_sb_inodes+0xa6/0x10b [] writeback_inodes_wb+0xd9/0xee [] wb_writeback+0x1af/0x26d [] ? try_to_del_timer_sync+0x81/0x89 [] ? local_bh_disable+0x8/0x18 [] wb_do_writeback+0x71/0x181 [] ? add_timer_on+0x95/0x95 [] ? del_timer+0xc/0x86 [] bdi_writeback_thread+0x6e/0x186 [] ? wb_do_writeback+0x181/0x181 [] kthread+0x67/0x6c [] ? kthread_worker_fn+0x114/0x114 [] kernel_thread_helper+0x6/0x10 ---[ end trace c45e837de578cd30 ]--- Fedora Core release 6 (Zod) Kernel 2.6.39-rc5-i486-1sys+ on an i686 mercury login: Fedora Core release 6 (Zod) Kernel 2.6.39-rc5-i486-1sys+ on an i686 mercury login: Fedora Core release 6 (Zod) Kernel 2.6.39-rc5-i486-1sys+ on an i686 mercury login: Fedora Core release 6 (Zod) Kernel 2.6.39-rc5-i486-1sys+ on an i686 mercury login: Fedora Core release 6 (Zod) Kernel 2.6.39-rc5-i486-1sys+ on an i686 mercury login: SysRq : Resetting