| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <47964dd140b0d36db6979f6cd945212ae566e60a.1304532833.git.nicolas.ferre@atmel.com>
Date: Wed, 4 May 2011 20:14:13 +0200
From: Nicolas Ferre <nicolas.ferre@...el.com>
To: vinod.koul@...el.com, dan.j.williams@...el.com,
linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org,
Nicolas Ferre <nicolas.ferre@...el.com>
Subject: [PATCH 2/2] dmaengine: at_hdmac: implement pause and resume in atc_control
Pause and resume controls are useful for audio devices. This also returns
correct status from atc_tx_status() in case chan is paused.
Idea from dw_dmac patch by Linus Walleij.
Signed-off-by: Nicolas Ferre <nicolas.ferre@...el.com>
---
drivers/dma/at_hdmac.c | 85 +++++++++++++++++++++++++++++--------------
drivers/dma/at_hdmac_regs.h | 1 +
2 files changed, 59 insertions(+), 27 deletions(-)
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index ba0b5ec..99ae628 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -508,7 +508,8 @@ static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
if (pending & (AT_DMA_BTC(i) | AT_DMA_ERR(i))) {
if (pending & AT_DMA_ERR(i)) {
/* Disable channel on AHB error */
- dma_writel(atdma, CHDR, atchan->mask);
+ dma_writel(atdma, CHDR,
+ AT_DMA_RES(i) | atchan->mask);
/* Give information to tasklet */
set_bit(ATC_IS_ERROR, &atchan->status);
}
@@ -952,39 +953,66 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
{
struct at_dma_chan *atchan = to_at_dma_chan(chan);
struct at_dma *atdma = to_at_dma(chan->device);
- struct at_desc *desc, *_desc;
+ int chan_id = atchan->chan_common.chan_id;
+
LIST_HEAD(list);
- /* Only supports DMA_TERMINATE_ALL */
- if (cmd != DMA_TERMINATE_ALL)
- return -ENXIO;
+ dev_vdbg(chan2dev(chan), "atc_control (%d)\n", cmd);
- /*
- * This is only called when something went wrong elsewhere, so
- * we don't really care about the data. Just disable the
- * channel. We still have to poll the channel enable bit due
- * to AHB/HSB limitations.
- */
- spin_lock_bh(&atchan->lock);
+ if (cmd == DMA_PAUSE) {
+ spin_lock_bh(&atchan->lock);
- dma_writel(atdma, CHDR, atchan->mask);
+ dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id));
- /* confirm that this channel is disabled */
- while (dma_readl(atdma, CHSR) & atchan->mask)
- cpu_relax();
+ while (!(dma_readl(atdma, CHSR) & AT_DMA_EMPT(chan_id)))
+ cpu_relax();
- /* active_list entries will end up before queued entries */
- list_splice_init(&atchan->queue, &list);
- list_splice_init(&atchan->active_list, &list);
+ set_bit(ATC_IS_PAUSED, &atchan->status);
- /* Flush all pending and queued descriptors */
- list_for_each_entry_safe(desc, _desc, &list, desc_node)
- atc_chain_complete(atchan, desc);
+ spin_unlock_bh(&atchan->lock);
+ } else if (cmd == DMA_RESUME) {
+ if (!test_bit(ATC_IS_PAUSED, &atchan->status))
+ return 0;
- /* if channel dedicated to cyclic operations, free it */
- clear_bit(ATC_IS_CYCLIC, &atchan->status);
+ spin_lock_bh(&atchan->lock);
- spin_unlock_bh(&atchan->lock);
+ dma_writel(atdma, CHDR, AT_DMA_RES(chan_id));
+ clear_bit(ATC_IS_PAUSED, &atchan->status);
+
+ spin_unlock_bh(&atchan->lock);
+ } else if (cmd == DMA_TERMINATE_ALL) {
+ struct at_desc *desc, *_desc;
+ /*
+ * This is only called when something went wrong elsewhere, so
+ * we don't really care about the data. Just disable the
+ * channel. We still have to poll the channel enable bit due
+ * to AHB/HSB limitations.
+ */
+ spin_lock_bh(&atchan->lock);
+
+ /* disabling channel: must also remove suspend state */
+ dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask);
+
+ /* confirm that this channel is disabled */
+ while (dma_readl(atdma, CHSR) & atchan->mask)
+ cpu_relax();
+
+ /* active_list entries will end up before queued entries */
+ list_splice_init(&atchan->queue, &list);
+ list_splice_init(&atchan->active_list, &list);
+
+ /* Flush all pending and queued descriptors */
+ list_for_each_entry_safe(desc, _desc, &list, desc_node)
+ atc_chain_complete(atchan, desc);
+
+ clear_bit(ATC_IS_PAUSED, &atchan->status);
+ /* if channel dedicated to cyclic operations, free it */
+ clear_bit(ATC_IS_CYCLIC, &atchan->status);
+
+ spin_unlock_bh(&atchan->lock);
+ } else {
+ return -ENXIO;
+ }
return 0;
}
@@ -1032,8 +1060,11 @@ atc_tx_status(struct dma_chan *chan,
else
dma_set_tx_state(txstate, last_complete, last_used, 0);
- dev_vdbg(chan2dev(chan), "tx_status: %d (d%d, u%d)\n",
- cookie, last_complete ? last_complete : 0,
+ if (test_bit(ATC_IS_PAUSED, &atchan->status))
+ ret = DMA_PAUSED;
+
+ dev_vdbg(chan2dev(chan), "tx_status %d: cookie = %d (d%d, u%d)\n",
+ ret, cookie, last_complete ? last_complete : 0,
last_used ? last_used : 0);
return ret;
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index ae3056d..087dbf1 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -191,6 +191,7 @@ txd_to_at_desc(struct dma_async_tx_descriptor *txd)
*/
enum atc_status {
ATC_IS_ERROR = 0,
+ ATC_IS_PAUSED = 1,
ATC_IS_CYCLIC = 24,
};
--
1.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists