| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1304547327.4379.0.camel@dcbw.foobar.com>
Date: Wed, 04 May 2011 17:15:25 -0500
From: Dan Williams <dcbw@...hat.com>
To: Joe Perches <joe@...ches.com>
Cc: "John W. Linville" <linville@...driver.com>,
libertas-dev@...ts.infradead.org, linux-wireless@...r.kernel.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] libertas: Convert lbs_pr_<level> to pr_<level>
On Mon, 2011-05-02 at 16:49 -0700, Joe Perches wrote:
> Use the standard pr_<level> functions eases grep a bit.
>
> Added a few missing terminating newlines to messages.
> Coalesced long formats.
>
> Signed-off-by: Joe Perches <joe@...ches.com>
Acked-by: Dan Williams <dcbw@...hat.com>
> ---
> drivers/net/wireless/libertas/cfg.c | 15 +++---
> drivers/net/wireless/libertas/cmd.c | 36 +++++++-------
> drivers/net/wireless/libertas/cmdresp.c | 29 +++++++-----
> drivers/net/wireless/libertas/debugfs.c | 6 ++-
> drivers/net/wireless/libertas/defs.h | 7 ---
> drivers/net/wireless/libertas/if_cs.c | 52 +++++++++++----------
> drivers/net/wireless/libertas/if_sdio.c | 38 ++++++++--------
> drivers/net/wireless/libertas/if_spi.c | 74 ++++++++++++++-----------------
> drivers/net/wireless/libertas/if_usb.c | 41 +++++++++--------
> drivers/net/wireless/libertas/main.c | 33 +++++++-------
> drivers/net/wireless/libertas/mesh.c | 8 ++-
> drivers/net/wireless/libertas/rx.c | 7 ++-
> 12 files changed, 174 insertions(+), 172 deletions(-)
>
> diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
> index 5caa2ac..d6e0656 100644
> --- a/drivers/net/wireless/libertas/cfg.c
> +++ b/drivers/net/wireless/libertas/cfg.c
> @@ -6,6 +6,8 @@
> *
> */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/sched.h>
> #include <linux/wait.h>
> #include <linux/slab.h>
> @@ -1314,8 +1316,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
> sme->ssid, sme->ssid_len,
> WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
> if (!bss) {
> - lbs_pr_err("assoc: bss %pM not in scan results\n",
> - sme->bssid);
> + pr_err("assoc: bss %pM not in scan results\n", sme->bssid);
> ret = -ENOENT;
> goto done;
> }
> @@ -1372,8 +1373,8 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
> lbs_enable_rsn(priv, sme->crypto.cipher_group != 0);
> break;
> default:
> - lbs_pr_err("unsupported cipher group 0x%x\n",
> - sme->crypto.cipher_group);
> + pr_err("unsupported cipher group 0x%x\n",
> + sme->crypto.cipher_group);
> ret = -ENOTSUPP;
> goto done;
> }
> @@ -1491,7 +1492,7 @@ static int lbs_cfg_add_key(struct wiphy *wiphy, struct net_device *netdev,
> params->key, params->key_len);
> break;
> default:
> - lbs_pr_err("unhandled cipher 0x%x\n", params->cipher);
> + pr_err("unhandled cipher 0x%x\n", params->cipher);
> ret = -ENOTSUPP;
> break;
> }
> @@ -2118,13 +2119,13 @@ int lbs_cfg_register(struct lbs_private *priv)
>
> ret = wiphy_register(wdev->wiphy);
> if (ret < 0)
> - lbs_pr_err("cannot register wiphy device\n");
> + pr_err("cannot register wiphy device\n");
>
> priv->wiphy_registered = true;
>
> ret = register_netdev(priv->dev);
> if (ret)
> - lbs_pr_err("cannot register network device\n");
> + pr_err("cannot register network device\n");
>
> INIT_DELAYED_WORK(&priv->scan_work, lbs_scan_worker);
>
> diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
> index 7e8a658..10ca485 100644
> --- a/drivers/net/wireless/libertas/cmd.c
> +++ b/drivers/net/wireless/libertas/cmd.c
> @@ -3,6 +3,8 @@
> * It prepares command and sends it to firmware when it is ready.
> */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/kfifo.h>
> #include <linux/sched.h>
> #include <linux/slab.h>
> @@ -108,7 +110,7 @@ int lbs_update_hw_spec(struct lbs_private *priv)
> * CF card firmware 5.0.16p0: cap 0x00000303
> * USB dongle firmware 5.110.17p2: cap 0x00000303
> */
> - lbs_pr_info("%pM, fw %u.%u.%up%u, cap 0x%08x\n",
> + pr_info("%pM, fw %u.%u.%up%u, cap 0x%08x\n",
> cmd.permanentaddr,
> priv->fwrelease >> 24 & 0xff,
> priv->fwrelease >> 16 & 0xff,
> @@ -139,7 +141,7 @@ int lbs_update_hw_spec(struct lbs_private *priv)
> /* if it's unidentified region code, use the default (USA) */
> if (i >= MRVDRV_MAX_REGION_CODE) {
> priv->regioncode = 0x10;
> - lbs_pr_info("unidentified region code; using the default (USA)\n");
> + pr_info("unidentified region code; using the default (USA)\n");
> }
>
> if (priv->current_addr[0] == 0xff)
> @@ -209,7 +211,7 @@ int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria,
> (uint8_t *)&cmd_config.wol_conf,
> sizeof(struct wol_config));
> } else {
> - lbs_pr_info("HOST_SLEEP_CFG failed %d\n", ret);
> + pr_info("HOST_SLEEP_CFG failed %d\n", ret);
> }
>
> return ret;
> @@ -312,7 +314,7 @@ static int lbs_wait_for_ds_awake(struct lbs_private *priv)
> if (priv->is_deep_sleep) {
> if (!wait_event_interruptible_timeout(priv->ds_awake_q,
> !priv->is_deep_sleep, (10 * HZ))) {
> - lbs_pr_err("ds_awake_q: timer expired\n");
> + pr_err("ds_awake_q: timer expired\n");
> ret = -1;
> }
> }
> @@ -337,7 +339,7 @@ int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep)
> netif_carrier_off(priv->dev);
> }
> } else {
> - lbs_pr_err("deep sleep: already enabled\n");
> + pr_err("deep sleep: already enabled\n");
> }
> } else {
> if (priv->is_deep_sleep) {
> @@ -347,8 +349,7 @@ int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep)
> if (!ret) {
> ret = lbs_wait_for_ds_awake(priv);
> if (ret)
> - lbs_pr_err("deep sleep: wakeup"
> - "failed\n");
> + pr_err("deep sleep: wakeup failed\n");
> }
> }
> }
> @@ -382,8 +383,8 @@ int lbs_set_host_sleep(struct lbs_private *priv, int host_sleep)
> ret = lbs_host_sleep_cfg(priv, priv->wol_criteria,
> (struct wol_config *)NULL);
> if (ret) {
> - lbs_pr_info("Host sleep configuration failed: "
> - "%d\n", ret);
> + pr_info("Host sleep configuration failed: %d\n",
> + ret);
> return ret;
> }
> if (priv->psstate == PS_STATE_FULL_POWER) {
> @@ -393,19 +394,19 @@ int lbs_set_host_sleep(struct lbs_private *priv, int host_sleep)
> sizeof(cmd),
> lbs_ret_host_sleep_activate, 0);
> if (ret)
> - lbs_pr_info("HOST_SLEEP_ACTIVATE "
> - "failed: %d\n", ret);
> + pr_info("HOST_SLEEP_ACTIVATE failed: %d\n",
> + ret);
> }
>
> if (!wait_event_interruptible_timeout(
> priv->host_sleep_q,
> priv->is_host_sleep_activated,
> (10 * HZ))) {
> - lbs_pr_err("host_sleep_q: timer expired\n");
> + pr_err("host_sleep_q: timer expired\n");
> ret = -1;
> }
> } else {
> - lbs_pr_err("host sleep: already enabled\n");
> + pr_err("host sleep: already enabled\n");
> }
> } else {
> if (priv->is_host_sleep_activated)
> @@ -1002,7 +1003,7 @@ static void lbs_submit_command(struct lbs_private *priv,
> ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize);
>
> if (ret) {
> - lbs_pr_info("DNLD_CMD: hw_host_to_card failed: %d\n", ret);
> + pr_info("DNLD_CMD: hw_host_to_card failed: %d\n", ret);
> /* Let the timer kick in and retry, and potentially reset
> the whole thing if the condition persists */
> timeo = HZ/4;
> @@ -1267,7 +1268,7 @@ int lbs_execute_next_command(struct lbs_private *priv)
> spin_lock_irqsave(&priv->driver_lock, flags);
>
> if (priv->cur_cmd) {
> - lbs_pr_alert( "EXEC_NEXT_CMD: already processing command!\n");
> + pr_alert( "EXEC_NEXT_CMD: already processing command!\n");
> spin_unlock_irqrestore(&priv->driver_lock, flags);
> ret = -1;
> goto done;
> @@ -1429,7 +1430,7 @@ static void lbs_send_confirmsleep(struct lbs_private *priv)
> ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) &confirm_sleep,
> sizeof(confirm_sleep));
> if (ret) {
> - lbs_pr_alert("confirm_sleep failed\n");
> + pr_alert("confirm_sleep failed\n");
> goto out;
> }
>
> @@ -1655,8 +1656,7 @@ int __lbs_cmd(struct lbs_private *priv, uint16_t command,
> spin_lock_irqsave(&priv->driver_lock, flags);
> ret = cmdnode->result;
> if (ret)
> - lbs_pr_info("PREP_CMD: command 0x%04x failed: %d\n",
> - command, ret);
> + pr_info("PREP_CMD: command 0x%04x failed: %d\n", command, ret);
>
> __lbs_cleanup_and_insert_cmd(priv, cmdnode);
> spin_unlock_irqrestore(&priv->driver_lock, flags);
> diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
> index 5e95da9..2cb6f5f 100644
> --- a/drivers/net/wireless/libertas/cmdresp.c
> +++ b/drivers/net/wireless/libertas/cmdresp.c
> @@ -2,6 +2,9 @@
> * This file contains the handling of command
> * responses as well as events generated by firmware.
> */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/slab.h>
> #include <linux/delay.h>
> #include <linux/sched.h>
> @@ -84,15 +87,17 @@ int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len)
> lbs_deb_hex(LBS_DEB_CMD, "CMD_RESP", (void *) resp, len);
>
> if (resp->seqnum != priv->cur_cmd->cmdbuf->seqnum) {
> - lbs_pr_info("Received CMD_RESP with invalid sequence %d (expected %d)\n",
> - le16_to_cpu(resp->seqnum), le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
> + pr_info("Received CMD_RESP with invalid sequence %d (expected %d)\n",
> + le16_to_cpu(resp->seqnum),
> + le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
> spin_unlock_irqrestore(&priv->driver_lock, flags);
> ret = -1;
> goto done;
> }
> if (respcmd != CMD_RET(curcmd) &&
> respcmd != CMD_RET_802_11_ASSOCIATE && curcmd != CMD_802_11_ASSOCIATE) {
> - lbs_pr_info("Invalid CMD_RESP %x to command %x!\n", respcmd, curcmd);
> + pr_info("Invalid CMD_RESP %x to command %x!\n",
> + respcmd, curcmd);
> spin_unlock_irqrestore(&priv->driver_lock, flags);
> ret = -1;
> goto done;
> @@ -101,8 +106,8 @@ int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len)
> if (resp->result == cpu_to_le16(0x0004)) {
> /* 0x0004 means -EAGAIN. Drop the response, let it time out
> and be resubmitted */
> - lbs_pr_info("Firmware returns DEFER to command %x. Will let it time out...\n",
> - le16_to_cpu(resp->command));
> + pr_info("Firmware returns DEFER to command %x. Will let it time out...\n",
> + le16_to_cpu(resp->command));
> spin_unlock_irqrestore(&priv->driver_lock, flags);
> ret = -1;
> goto done;
> @@ -313,28 +318,28 @@ int lbs_process_event(struct lbs_private *priv, u32 event)
> lbs_deb_cmd("EVENT: ADHOC beacon lost\n");
> break;
> case MACREG_INT_CODE_RSSI_LOW:
> - lbs_pr_alert("EVENT: rssi low\n");
> + pr_alert("EVENT: rssi low\n");
> break;
> case MACREG_INT_CODE_SNR_LOW:
> - lbs_pr_alert("EVENT: snr low\n");
> + pr_alert("EVENT: snr low\n");
> break;
> case MACREG_INT_CODE_MAX_FAIL:
> - lbs_pr_alert("EVENT: max fail\n");
> + pr_alert("EVENT: max fail\n");
> break;
> case MACREG_INT_CODE_RSSI_HIGH:
> - lbs_pr_alert("EVENT: rssi high\n");
> + pr_alert("EVENT: rssi high\n");
> break;
> case MACREG_INT_CODE_SNR_HIGH:
> - lbs_pr_alert("EVENT: snr high\n");
> + pr_alert("EVENT: snr high\n");
> break;
>
> case MACREG_INT_CODE_MESH_AUTO_STARTED:
> /* Ignore spurious autostart events */
> - lbs_pr_info("EVENT: MESH_AUTO_STARTED (ignoring)\n");
> + pr_info("EVENT: MESH_AUTO_STARTED (ignoring)\n");
> break;
>
> default:
> - lbs_pr_alert("EVENT: unknown event id %d\n", event);
> + pr_alert("EVENT: unknown event id %d\n", event);
> break;
> }
>
> diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
> index fbf3b033..c179094 100644
> --- a/drivers/net/wireless/libertas/debugfs.c
> +++ b/drivers/net/wireless/libertas/debugfs.c
> @@ -1,3 +1,5 @@
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/dcache.h>
> #include <linux/debugfs.h>
> #include <linux/delay.h>
> @@ -151,13 +153,13 @@ static ssize_t lbs_host_sleep_write(struct file *file,
> ret = lbs_set_host_sleep(priv, 0);
> else if (host_sleep == 1) {
> if (priv->wol_criteria == EHS_REMOVE_WAKEUP) {
> - lbs_pr_info("wake parameters not configured");
> + pr_info("wake parameters not configured\n");
> ret = -EINVAL;
> goto out_unlock;
> }
> ret = lbs_set_host_sleep(priv, 1);
> } else {
> - lbs_pr_err("invalid option\n");
> + pr_err("invalid option\n");
> ret = -EINVAL;
> }
>
> diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
> index d00c728..c9b89b0 100644
> --- a/drivers/net/wireless/libertas/defs.h
> +++ b/drivers/net/wireless/libertas/defs.h
> @@ -89,13 +89,6 @@ do { if ((lbs_debug & (grp)) == (grp)) \
> #define lbs_deb_spi(fmt, args...) LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
> #define lbs_deb_cfg80211(fmt, args...) LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
>
> -#define lbs_pr_info(format, args...) \
> - printk(KERN_INFO DRV_NAME": " format, ## args)
> -#define lbs_pr_err(format, args...) \
> - printk(KERN_ERR DRV_NAME": " format, ## args)
> -#define lbs_pr_alert(format, args...) \
> - printk(KERN_ALERT DRV_NAME": " format, ## args)
> -
> #ifdef DEBUG
> static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, int len)
> {
> diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
> index 8712cb2..eb88d9a 100644
> --- a/drivers/net/wireless/libertas/if_cs.c
> +++ b/drivers/net/wireless/libertas/if_cs.c
> @@ -21,6 +21,8 @@
>
> */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/module.h>
> #include <linux/slab.h>
> #include <linux/delay.h>
> @@ -361,7 +363,7 @@ static int if_cs_send_cmd(struct lbs_private *priv, u8 *buf, u16 nb)
> if (status & IF_CS_BIT_COMMAND)
> break;
> if (++loops > 100) {
> - lbs_pr_err("card not ready for commands\n");
> + pr_err("card not ready for commands\n");
> goto done;
> }
> mdelay(1);
> @@ -431,14 +433,14 @@ static int if_cs_receive_cmdres(struct lbs_private *priv, u8 *data, u32 *len)
> /* is hardware ready? */
> status = if_cs_read16(priv->card, IF_CS_CARD_STATUS);
> if ((status & IF_CS_BIT_RESP) == 0) {
> - lbs_pr_err("no cmd response in card\n");
> + pr_err("no cmd response in card\n");
> *len = 0;
> goto out;
> }
>
> *len = if_cs_read16(priv->card, IF_CS_RESP_LEN);
> if ((*len == 0) || (*len > LBS_CMD_BUFFER_SIZE)) {
> - lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
> + pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
> goto out;
> }
>
> @@ -472,7 +474,7 @@ static struct sk_buff *if_cs_receive_data(struct lbs_private *priv)
>
> len = if_cs_read16(priv->card, IF_CS_READ_LEN);
> if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
> - lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len);
> + pr_err("card data buffer has invalid # of bytes (%d)\n", len);
> priv->dev->stats.rx_dropped++;
> goto dat_err;
> }
> @@ -644,8 +646,8 @@ static int if_cs_prog_helper(struct if_cs_card *card, const struct firmware *fw)
> ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
> IF_CS_BIT_COMMAND);
> if (ret < 0) {
> - lbs_pr_err("can't download helper at 0x%x, ret %d\n",
> - sent, ret);
> + pr_err("can't download helper at 0x%x, ret %d\n",
> + sent, ret);
> goto done;
> }
>
> @@ -675,7 +677,7 @@ static int if_cs_prog_real(struct if_cs_card *card, const struct firmware *fw)
> ret = if_cs_poll_while_fw_download(card, IF_CS_SQ_READ_LOW,
> IF_CS_SQ_HELPER_OK);
> if (ret < 0) {
> - lbs_pr_err("helper firmware doesn't answer\n");
> + pr_err("helper firmware doesn't answer\n");
> goto done;
> }
>
> @@ -683,13 +685,13 @@ static int if_cs_prog_real(struct if_cs_card *card, const struct firmware *fw)
> len = if_cs_read16(card, IF_CS_SQ_READ_LOW);
> if (len & 1) {
> retry++;
> - lbs_pr_info("odd, need to retry this firmware block\n");
> + pr_info("odd, need to retry this firmware block\n");
> } else {
> retry = 0;
> }
>
> if (retry > 20) {
> - lbs_pr_err("could not download firmware\n");
> + pr_err("could not download firmware\n");
> ret = -ENODEV;
> goto done;
> }
> @@ -709,14 +711,14 @@ static int if_cs_prog_real(struct if_cs_card *card, const struct firmware *fw)
> ret = if_cs_poll_while_fw_download(card, IF_CS_CARD_STATUS,
> IF_CS_BIT_COMMAND);
> if (ret < 0) {
> - lbs_pr_err("can't download firmware at 0x%x\n", sent);
> + pr_err("can't download firmware at 0x%x\n", sent);
> goto done;
> }
> }
>
> ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
> if (ret < 0)
> - lbs_pr_err("firmware download failed\n");
> + pr_err("firmware download failed\n");
>
> done:
> lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
> @@ -750,7 +752,7 @@ static int if_cs_host_to_card(struct lbs_private *priv,
> ret = if_cs_send_cmd(priv, buf, nb);
> break;
> default:
> - lbs_pr_err("%s: unsupported type %d\n", __func__, type);
> + pr_err("%s: unsupported type %d\n", __func__, type);
> }
>
> lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
> @@ -779,7 +781,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
> p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
>
> if (p_dev->resource[1]->end) {
> - lbs_pr_err("wrong CIS (check number of IO windows)\n");
> + pr_err("wrong CIS (check number of IO windows)\n");
> return -ENODEV;
> }
>
> @@ -800,7 +802,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
>
> card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL);
> if (!card) {
> - lbs_pr_err("error in kzalloc\n");
> + pr_err("error in kzalloc\n");
> goto out;
> }
> card->p_dev = p_dev;
> @@ -809,7 +811,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
> p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
>
> if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
> - lbs_pr_err("error in pcmcia_loop_config\n");
> + pr_err("error in pcmcia_loop_config\n");
> goto out1;
> }
>
> @@ -825,14 +827,14 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
> card->iobase = ioport_map(p_dev->resource[0]->start,
> resource_size(p_dev->resource[0]));
> if (!card->iobase) {
> - lbs_pr_err("error in ioport_map\n");
> + pr_err("error in ioport_map\n");
> ret = -EIO;
> goto out1;
> }
>
> ret = pcmcia_enable_device(p_dev);
> if (ret) {
> - lbs_pr_err("error in pcmcia_enable_device\n");
> + pr_err("error in pcmcia_enable_device\n");
> goto out2;
> }
>
> @@ -847,8 +849,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
>
> card->model = get_model(p_dev->manf_id, p_dev->card_id);
> if (card->model == MODEL_UNKNOWN) {
> - lbs_pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n",
> - p_dev->manf_id, p_dev->card_id);
> + pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n",
> + p_dev->manf_id, p_dev->card_id);
> goto out2;
> }
>
> @@ -857,20 +859,20 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
> if (card->model == MODEL_8305) {
> card->align_regs = 1;
> if (prod_id < IF_CS_CF8305_B1_REV) {
> - lbs_pr_err("8305 rev B0 and older are not supported\n");
> + pr_err("8305 rev B0 and older are not supported\n");
> ret = -ENODEV;
> goto out2;
> }
> }
>
> if ((card->model == MODEL_8381) && prod_id < IF_CS_CF8381_B3_REV) {
> - lbs_pr_err("8381 rev B2 and older are not supported\n");
> + pr_err("8381 rev B2 and older are not supported\n");
> ret = -ENODEV;
> goto out2;
> }
>
> if ((card->model == MODEL_8385) && prod_id < IF_CS_CF8385_B1_REV) {
> - lbs_pr_err("8385 rev B0 and older are not supported\n");
> + pr_err("8385 rev B0 and older are not supported\n");
> ret = -ENODEV;
> goto out2;
> }
> @@ -878,7 +880,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
> ret = lbs_get_firmware(&p_dev->dev, NULL, NULL, card->model,
> &fw_table[0], &helper, &mainfw);
> if (ret) {
> - lbs_pr_err("failed to find firmware (%d)\n", ret);
> + pr_err("failed to find firmware (%d)\n", ret);
> goto out2;
> }
>
> @@ -909,7 +911,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
> ret = request_irq(p_dev->irq, if_cs_interrupt,
> IRQF_SHARED, DRV_NAME, card);
> if (ret) {
> - lbs_pr_err("error in request_irq\n");
> + pr_err("error in request_irq\n");
> goto out3;
> }
>
> @@ -920,7 +922,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
>
> /* And finally bring the card up */
> if (lbs_start_card(priv) != 0) {
> - lbs_pr_err("could not activate card\n");
> + pr_err("could not activate card\n");
> goto out3;
> }
>
> diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
> index b4de0ca..ab86779 100644
> --- a/drivers/net/wireless/libertas/if_sdio.c
> +++ b/drivers/net/wireless/libertas/if_sdio.c
> @@ -26,6 +26,8 @@
> * if_sdio_card_to_host() to pad the data.
> */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/kernel.h>
> #include <linux/moduleparam.h>
> #include <linux/slab.h>
> @@ -409,7 +411,7 @@ static int if_sdio_card_to_host(struct if_sdio_card *card)
>
> out:
> if (ret)
> - lbs_pr_err("problem fetching packet from firmware\n");
> + pr_err("problem fetching packet from firmware\n");
>
> lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
>
> @@ -446,7 +448,7 @@ static void if_sdio_host_to_card_worker(struct work_struct *work)
> }
>
> if (ret)
> - lbs_pr_err("error %d sending packet to firmware\n", ret);
> + pr_err("error %d sending packet to firmware\n", ret);
>
> sdio_release_host(card->func);
>
> @@ -555,7 +557,7 @@ release:
>
> out:
> if (ret)
> - lbs_pr_err("failed to load helper firmware\n");
> + pr_err("failed to load helper firmware\n");
>
> lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
> return ret;
> @@ -669,7 +671,7 @@ release:
>
> out:
> if (ret)
> - lbs_pr_err("failed to load firmware\n");
> + pr_err("failed to load firmware\n");
>
> lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
> return ret;
> @@ -723,7 +725,7 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
> ret = lbs_get_firmware(&card->func->dev, lbs_helper_name, lbs_fw_name,
> card->model, &fw_table[0], &helper, &mainfw);
> if (ret) {
> - lbs_pr_err("failed to find firmware (%d)\n", ret);
> + pr_err("failed to find firmware (%d)\n", ret);
> goto out;
> }
>
> @@ -849,7 +851,7 @@ static int if_sdio_enter_deep_sleep(struct lbs_private *priv)
> ret = __lbs_cmd(priv, CMD_802_11_DEEP_SLEEP, &cmd, sizeof(cmd),
> lbs_cmd_copyback, (unsigned long) &cmd);
> if (ret)
> - lbs_pr_err("DEEP_SLEEP cmd failed\n");
> + pr_err("DEEP_SLEEP cmd failed\n");
>
> mdelay(200);
> return ret;
> @@ -865,7 +867,7 @@ static int if_sdio_exit_deep_sleep(struct lbs_private *priv)
>
> sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
> if (ret)
> - lbs_pr_err("sdio_writeb failed!\n");
> + pr_err("sdio_writeb failed!\n");
>
> sdio_release_host(card->func);
> lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
> @@ -882,7 +884,7 @@ static int if_sdio_reset_deep_sleep_wakeup(struct lbs_private *priv)
>
> sdio_writeb(card->func, 0, CONFIGURATION_REG, &ret);
> if (ret)
> - lbs_pr_err("sdio_writeb failed!\n");
> + pr_err("sdio_writeb failed!\n");
>
> sdio_release_host(card->func);
> lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
> @@ -961,7 +963,7 @@ static int if_sdio_probe(struct sdio_func *func,
> }
>
> if (i == func->card->num_info) {
> - lbs_pr_err("unable to identify card model\n");
> + pr_err("unable to identify card model\n");
> return -ENODEV;
> }
>
> @@ -995,7 +997,7 @@ static int if_sdio_probe(struct sdio_func *func,
> break;
> }
> if (i == ARRAY_SIZE(fw_table)) {
> - lbs_pr_err("unknown card model 0x%x\n", card->model);
> + pr_err("unknown card model 0x%x\n", card->model);
> ret = -ENODEV;
> goto free;
> }
> @@ -1101,7 +1103,7 @@ static int if_sdio_probe(struct sdio_func *func,
> lbs_deb_sdio("send function INIT command\n");
> if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
> lbs_cmd_copyback, (unsigned long) &cmd))
> - lbs_pr_alert("CMD_FUNC_INIT cmd failed\n");
> + pr_alert("CMD_FUNC_INIT cmd failed\n");
> }
>
> ret = lbs_start_card(priv);
> @@ -1163,7 +1165,7 @@ static void if_sdio_remove(struct sdio_func *func)
> if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN,
> &cmd, sizeof(cmd), lbs_cmd_copyback,
> (unsigned long) &cmd))
> - lbs_pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
> + pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
> }
>
>
> @@ -1202,21 +1204,19 @@ static int if_sdio_suspend(struct device *dev)
>
> mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
>
> - lbs_pr_info("%s: suspend: PM flags = 0x%x\n",
> - sdio_func_id(func), flags);
> + pr_info("%s: suspend: PM flags = 0x%x\n", sdio_func_id(func), flags);
>
> /* If we aren't being asked to wake on anything, we should bail out
> * and let the SD stack power down the card.
> */
> if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) {
> - lbs_pr_info("Suspend without wake params -- "
> - "powering down card.");
> + pr_info("Suspend without wake params -- powering down card\n");
> return -ENOSYS;
> }
>
> if (!(flags & MMC_PM_KEEP_POWER)) {
> - lbs_pr_err("%s: cannot remain alive while host is suspended\n",
> - sdio_func_id(func));
> + pr_err("%s: cannot remain alive while host is suspended\n",
> + sdio_func_id(func));
> return -ENOSYS;
> }
>
> @@ -1237,7 +1237,7 @@ static int if_sdio_resume(struct device *dev)
> struct if_sdio_card *card = sdio_get_drvdata(func);
> int ret;
>
> - lbs_pr_info("%s: resume: we're back\n", sdio_func_id(func));
> + pr_info("%s: resume: we're back\n", sdio_func_id(func));
>
> ret = lbs_resume(card->priv);
>
> diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
> index 078ef43..bebd9f0 100644
> --- a/drivers/net/wireless/libertas/if_spi.c
> +++ b/drivers/net/wireless/libertas/if_spi.c
> @@ -17,6 +17,8 @@
> * (at your option) any later version.
> */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/moduleparam.h>
> #include <linux/firmware.h>
> #include <linux/jiffies.h>
> @@ -297,8 +299,7 @@ static int spu_wait_for_u16(struct if_spi_card *card, u16 reg,
> }
> udelay(100);
> if (time_after(jiffies, timeout)) {
> - lbs_pr_err("%s: timeout with val=%02x, "
> - "target_mask=%02x, target=%02x\n",
> + pr_err("%s: timeout with val=%02x, target_mask=%02x, target=%02x\n",
> __func__, val, target_mask, target);
> return -ETIMEDOUT;
> }
> @@ -391,7 +392,7 @@ static int spu_set_bus_mode(struct if_spi_card *card, u16 mode)
> if (err)
> return err;
> if ((rval & 0xF) != mode) {
> - lbs_pr_err("Can't read bus mode register.\n");
> + pr_err("Can't read bus mode register\n");
> return -EIO;
> }
> return 0;
> @@ -512,7 +513,7 @@ static int if_spi_prog_helper_firmware(struct if_spi_card *card,
>
> out:
> if (err)
> - lbs_pr_err("failed to load helper firmware (err=%d)\n", err);
> + pr_err("failed to load helper firmware (err=%d)\n", err);
> lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
> return err;
> }
> @@ -531,7 +532,7 @@ static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
> IF_SPI_HIST_CMD_DOWNLOAD_RDY,
> IF_SPI_HIST_CMD_DOWNLOAD_RDY);
> if (err) {
> - lbs_pr_err("timed out waiting for host_int_status\n");
> + pr_err("timed out waiting for host_int_status\n");
> return err;
> }
>
> @@ -541,9 +542,8 @@ static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
> return err;
>
> if (len > IF_SPI_CMD_BUF_SIZE) {
> - lbs_pr_err("firmware load device requested a larger "
> - "tranfer than we are prepared to "
> - "handle. (len = %d)\n", len);
> + pr_err("firmware load device requested a larger transfer than we are prepared to handle (len = %d)\n",
> + len);
> return -EIO;
> }
> if (len & 0x1) {
> @@ -572,8 +572,8 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card,
>
> err = spu_wait_for_u16(card, IF_SPI_SCRATCH_1_REG, 0, 0);
> if (err) {
> - lbs_pr_err("%s: timed out waiting for initial "
> - "scratch reg = 0\n", __func__);
> + pr_err("%s: timed out waiting for initial scratch reg = 0\n",
> + __func__);
> goto out;
> }
>
> @@ -589,15 +589,13 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card,
> if (bytes < 0) {
> /* If there are no more bytes left, we would normally
> * expect to have terminated with len = 0 */
> - lbs_pr_err("Firmware load wants more bytes "
> - "than we have to offer.\n");
> + pr_err("Firmware load wants more bytes than we have to offer\n");
> break;
> }
> if (crc_err) {
> /* Previous transfer failed. */
> if (++num_crc_errs > MAX_MAIN_FW_LOAD_CRC_ERR) {
> - lbs_pr_err("Too many CRC errors encountered "
> - "in firmware load.\n");
> + pr_err("Too many CRC errors encountered in firmware load\n");
> err = -EIO;
> goto out;
> }
> @@ -626,21 +624,20 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card,
> prev_len = len;
> }
> if (bytes > prev_len) {
> - lbs_pr_err("firmware load wants fewer bytes than "
> - "we have to offer.\n");
> + pr_err("firmware load wants fewer bytes than we have to offer\n");
> }
>
> /* Confirm firmware download */
> err = spu_wait_for_u32(card, IF_SPI_SCRATCH_4_REG,
> SUCCESSFUL_FW_DOWNLOAD_MAGIC);
> if (err) {
> - lbs_pr_err("failed to confirm the firmware download\n");
> + pr_err("failed to confirm the firmware download\n");
> goto out;
> }
>
> out:
> if (err)
> - lbs_pr_err("failed to load firmware (err=%d)\n", err);
> + pr_err("failed to load firmware (err=%d)\n", err);
> lbs_deb_leave_args(LBS_DEB_SPI, "err %d", err);
> return err;
> }
> @@ -677,14 +674,12 @@ static int if_spi_c2h_cmd(struct if_spi_card *card)
> if (err)
> goto out;
> if (!len) {
> - lbs_pr_err("%s: error: card has no data for host\n",
> - __func__);
> + pr_err("%s: error: card has no data for host\n", __func__);
> err = -EINVAL;
> goto out;
> } else if (len > IF_SPI_CMD_BUF_SIZE) {
> - lbs_pr_err("%s: error: response packet too large: "
> - "%d bytes, but maximum is %d\n",
> - __func__, len, IF_SPI_CMD_BUF_SIZE);
> + pr_err("%s: error: response packet too large: %d bytes, but maximum is %d\n",
> + __func__, len, IF_SPI_CMD_BUF_SIZE);
> err = -EINVAL;
> goto out;
> }
> @@ -705,7 +700,7 @@ static int if_spi_c2h_cmd(struct if_spi_card *card)
>
> out:
> if (err)
> - lbs_pr_err("%s: err=%d\n", __func__, err);
> + pr_err("%s: err=%d\n", __func__, err);
> lbs_deb_leave(LBS_DEB_SPI);
> return err;
> }
> @@ -725,14 +720,12 @@ static int if_spi_c2h_data(struct if_spi_card *card)
> if (err)
> goto out;
> if (!len) {
> - lbs_pr_err("%s: error: card has no data for host\n",
> - __func__);
> + pr_err("%s: error: card has no data for host\n", __func__);
> err = -EINVAL;
> goto out;
> } else if (len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
> - lbs_pr_err("%s: error: card has %d bytes of data, but "
> - "our maximum skb size is %zu\n",
> - __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
> + pr_err("%s: error: card has %d bytes of data, but our maximum skb size is %zu\n",
> + __func__, len, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
> err = -EINVAL;
> goto out;
> }
> @@ -763,7 +756,7 @@ free_skb:
> dev_kfree_skb(skb);
> out:
> if (err)
> - lbs_pr_err("%s: err=%d\n", __func__, err);
> + pr_err("%s: err=%d\n", __func__, err);
> lbs_deb_leave(LBS_DEB_SPI);
> return err;
> }
> @@ -785,7 +778,7 @@ static void if_spi_h2c(struct if_spi_card *card,
> port_reg = IF_SPI_CMD_RDWRPORT_REG;
> break;
> default:
> - lbs_pr_err("can't transfer buffer of type %d\n", type);
> + pr_err("can't transfer buffer of type %d\n", type);
> err = -EINVAL;
> goto out;
> }
> @@ -799,7 +792,7 @@ out:
> kfree(packet);
>
> if (err)
> - lbs_pr_err("%s: error %d\n", __func__, err);
> + pr_err("%s: error %d\n", __func__, err);
> }
>
> /* Inform the host about a card event */
> @@ -823,7 +816,7 @@ static void if_spi_e2h(struct if_spi_card *card)
> lbs_queue_event(priv, cause & 0xff);
> out:
> if (err)
> - lbs_pr_err("%s: error %d\n", __func__, err);
> + pr_err("%s: error %d\n", __func__, err);
> }
>
> static void if_spi_host_to_card_worker(struct work_struct *work)
> @@ -843,7 +836,7 @@ static void if_spi_host_to_card_worker(struct work_struct *work)
> err = spu_read_u16(card, IF_SPI_HOST_INT_STATUS_REG,
> &hiStatus);
> if (err) {
> - lbs_pr_err("I/O error\n");
> + pr_err("I/O error\n");
> goto err;
> }
>
> @@ -905,7 +898,7 @@ static void if_spi_host_to_card_worker(struct work_struct *work)
>
> err:
> if (err)
> - lbs_pr_err("%s: got error %d\n", __func__, err);
> + pr_err("%s: got error %d\n", __func__, err);
>
> lbs_deb_leave(LBS_DEB_SPI);
> }
> @@ -927,7 +920,7 @@ static int if_spi_host_to_card(struct lbs_private *priv,
> lbs_deb_enter_args(LBS_DEB_SPI, "type %d, bytes %d", type, nb);
>
> if (nb == 0) {
> - lbs_pr_err("%s: invalid size requested: %d\n", __func__, nb);
> + pr_err("%s: invalid size requested: %d\n", __func__, nb);
> err = -EINVAL;
> goto out;
> }
> @@ -955,7 +948,7 @@ static int if_spi_host_to_card(struct lbs_private *priv,
> spin_unlock_irqrestore(&card->buffer_lock, flags);
> break;
> default:
> - lbs_pr_err("can't transfer buffer of type %d", type);
> + pr_err("can't transfer buffer of type %d\n", type);
> err = -EINVAL;
> break;
> }
> @@ -1016,8 +1009,7 @@ static int if_spi_init_card(struct if_spi_card *card)
> break;
> }
> if (i == ARRAY_SIZE(fw_table)) {
> - lbs_pr_err("Unsupported chip_id: 0x%02x\n",
> - card->card_id);
> + pr_err("Unsupported chip_id: 0x%02x\n", card->card_id);
> err = -ENODEV;
> goto out;
> }
> @@ -1026,7 +1018,7 @@ static int if_spi_init_card(struct if_spi_card *card)
> card->card_id, &fw_table[0], &helper,
> &mainfw);
> if (err) {
> - lbs_pr_err("failed to find firmware (%d)\n", err);
> + pr_err("failed to find firmware (%d)\n", err);
> goto out;
> }
>
> @@ -1149,7 +1141,7 @@ static int __devinit if_spi_probe(struct spi_device *spi)
> err = request_irq(spi->irq, if_spi_host_interrupt,
> IRQF_TRIGGER_FALLING, "libertas_spi", card);
> if (err) {
> - lbs_pr_err("can't get host irq line-- request_irq failed\n");
> + pr_err("can't get host irq line-- request_irq failed\n");
> goto terminate_workqueue;
> }
>
> diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
> index 6524c70..7260791 100644
> --- a/drivers/net/wireless/libertas/if_usb.c
> +++ b/drivers/net/wireless/libertas/if_usb.c
> @@ -1,6 +1,9 @@
> /**
> * This file contains functions used in USB interface module.
> */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/delay.h>
> #include <linux/moduleparam.h>
> #include <linux/firmware.h>
> @@ -145,7 +148,7 @@ static void if_usb_write_bulk_callback(struct urb *urb)
> lbs_host_to_card_done(priv);
> } else {
> /* print the failure status number for debug */
> - lbs_pr_info("URB in failure status: %d\n", urb->status);
> + pr_info("URB in failure status: %d\n", urb->status);
> }
> }
>
> @@ -195,7 +198,7 @@ static void if_usb_setup_firmware(struct lbs_private *priv)
> wake_method.hdr.size = cpu_to_le16(sizeof(wake_method));
> wake_method.action = cpu_to_le16(CMD_ACT_GET);
> if (lbs_cmd_with_response(priv, CMD_802_11_FW_WAKE_METHOD, &wake_method)) {
> - lbs_pr_info("Firmware does not seem to support PS mode\n");
> + pr_info("Firmware does not seem to support PS mode\n");
> priv->fwcapinfo &= ~FW_CAPINFO_PS;
> } else {
> if (le16_to_cpu(wake_method.method) == CMD_WAKE_METHOD_COMMAND_INT) {
> @@ -204,7 +207,7 @@ static void if_usb_setup_firmware(struct lbs_private *priv)
> /* The versions which boot up this way don't seem to
> work even if we set it to the command interrupt */
> priv->fwcapinfo &= ~FW_CAPINFO_PS;
> - lbs_pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
> + pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
> }
> }
> }
> @@ -216,7 +219,7 @@ static void if_usb_fw_timeo(unsigned long priv)
> if (cardp->fwdnldover) {
> lbs_deb_usb("Download complete, no event. Assuming success\n");
> } else {
> - lbs_pr_err("Download timed out\n");
> + pr_err("Download timed out\n");
> cardp->surprise_removed = 1;
> }
> wake_up(&cardp->fw_wq);
> @@ -250,7 +253,7 @@ static int if_usb_probe(struct usb_interface *intf,
>
> cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL);
> if (!cardp) {
> - lbs_pr_err("Out of memory allocating private data.\n");
> + pr_err("Out of memory allocating private data\n");
> goto error;
> }
>
> @@ -340,10 +343,10 @@ static int if_usb_probe(struct usb_interface *intf,
> usb_set_intfdata(intf, cardp);
>
> if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw))
> - lbs_pr_err("cannot register lbs_flash_fw attribute\n");
> + pr_err("cannot register lbs_flash_fw attribute\n");
>
> if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
> - lbs_pr_err("cannot register lbs_flash_boot2 attribute\n");
> + pr_err("cannot register lbs_flash_boot2 attribute\n");
>
> /*
> * EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
> @@ -528,7 +531,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
> int ret = -1;
>
> if (!(skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE))) {
> - lbs_pr_err("No free skb\n");
> + pr_err("No free skb\n");
> goto rx_ret;
> }
>
> @@ -587,7 +590,7 @@ static void if_usb_receive_fwload(struct urb *urb)
>
> if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) &&
> tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) {
> - lbs_pr_info("Firmware ready event received\n");
> + pr_info("Firmware ready event received\n");
> wake_up(&cardp->fw_wq);
> } else {
> lbs_deb_usb("Waiting for confirmation; got %x %x\n",
> @@ -614,20 +617,20 @@ static void if_usb_receive_fwload(struct urb *urb)
> bootcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) ||
> bootcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) {
> if (!cardp->bootcmdresp)
> - lbs_pr_info("Firmware already seems alive; resetting\n");
> + pr_info("Firmware already seems alive; resetting\n");
> cardp->bootcmdresp = -1;
> } else {
> - lbs_pr_info("boot cmd response wrong magic number (0x%x)\n",
> + pr_info("boot cmd response wrong magic number (0x%x)\n",
> le32_to_cpu(bootcmdresp.magic));
> }
> } else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) &&
> (bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) &&
> (bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) {
> - lbs_pr_info("boot cmd response cmd_tag error (%d)\n",
> - bootcmdresp.cmd);
> + pr_info("boot cmd response cmd_tag error (%d)\n",
> + bootcmdresp.cmd);
> } else if (bootcmdresp.result != BOOT_CMD_RESP_OK) {
> - lbs_pr_info("boot cmd response result error (%d)\n",
> - bootcmdresp.result);
> + pr_info("boot cmd response result error (%d)\n",
> + bootcmdresp.result);
> } else {
> cardp->bootcmdresp = 1;
> lbs_deb_usbd(&cardp->udev->dev,
> @@ -892,7 +895,7 @@ static int check_fwfile_format(const uint8_t *data, uint32_t totlen)
> } while (!exit);
>
> if (ret)
> - lbs_pr_err("firmware file format check FAIL\n");
> + pr_err("firmware file format check FAIL\n");
> else
> lbs_deb_fw("firmware file format check PASS\n");
>
> @@ -989,7 +992,7 @@ static int __if_usb_prog_firmware(struct if_usb_card *cardp,
>
> ret = get_fw(cardp, fwname);
> if (ret) {
> - lbs_pr_err("failed to find firmware (%d)\n", ret);
> + pr_err("failed to find firmware (%d)\n", ret);
> goto done;
> }
>
> @@ -1064,13 +1067,13 @@ restart:
> usb_kill_urb(cardp->rx_urb);
>
> if (!cardp->fwdnldover) {
> - lbs_pr_info("failed to load fw, resetting device!\n");
> + pr_info("failed to load fw, resetting device!\n");
> if (--reset_count >= 0) {
> if_usb_reset_device(cardp);
> goto restart;
> }
>
> - lbs_pr_info("FW download failure, time = %d ms\n", i * 100);
> + pr_info("FW download failure, time = %d ms\n", i * 100);
> ret = -EIO;
> goto release_fw;
> }
> diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
> index ca8149c..639461b 100644
> --- a/drivers/net/wireless/libertas/main.c
> +++ b/drivers/net/wireless/libertas/main.c
> @@ -4,6 +4,8 @@
> * thread etc..
> */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/moduleparam.h>
> #include <linux/delay.h>
> #include <linux/etherdevice.h>
> @@ -153,7 +155,7 @@ static void lbs_tx_timeout(struct net_device *dev)
>
> lbs_deb_enter(LBS_DEB_TX);
>
> - lbs_pr_err("tx watch dog timeout\n");
> + pr_err("tx watch dog timeout\n");
>
> dev->trans_start = jiffies; /* prevent tx timeout */
>
> @@ -462,7 +464,7 @@ static int lbs_thread(void *data)
> if (priv->cmd_timed_out && priv->cur_cmd) {
> struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
>
> - lbs_pr_info("Timeout submitting command 0x%04x\n",
> + pr_info("Timeout submitting command 0x%04x\n",
> le16_to_cpu(cmdnode->cmdbuf->command));
> lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
> if (priv->reset_card)
> @@ -490,8 +492,7 @@ static int lbs_thread(void *data)
> * after firmware fixes it
> */
> priv->psstate = PS_STATE_AWAKE;
> - lbs_pr_alert("ignore PS_SleepConfirm in "
> - "non-connected state\n");
> + pr_alert("ignore PS_SleepConfirm in non-connected state\n");
> }
> }
>
> @@ -585,7 +586,7 @@ int lbs_suspend(struct lbs_private *priv)
> if (priv->is_deep_sleep) {
> ret = lbs_set_deep_sleep(priv, 0);
> if (ret) {
> - lbs_pr_err("deep sleep cancellation failed: %d\n", ret);
> + pr_err("deep sleep cancellation failed: %d\n", ret);
> return ret;
> }
> priv->deep_sleep_required = 1;
> @@ -618,7 +619,7 @@ int lbs_resume(struct lbs_private *priv)
> priv->deep_sleep_required = 0;
> ret = lbs_set_deep_sleep(priv, 1);
> if (ret)
> - lbs_pr_err("deep sleep activation failed: %d\n", ret);
> + pr_err("deep sleep activation failed: %d\n", ret);
> }
>
> if (priv->setup_fw_on_resume)
> @@ -644,7 +645,7 @@ static void lbs_cmd_timeout_handler(unsigned long data)
> if (!priv->cur_cmd)
> goto out;
>
> - lbs_pr_info("command 0x%04x timed out\n",
> + pr_info("command 0x%04x timed out\n",
> le16_to_cpu(priv->cur_cmd->cmdbuf->command));
>
> priv->cmd_timed_out = 1;
> @@ -748,7 +749,7 @@ static int lbs_init_adapter(struct lbs_private *priv)
>
> /* Allocate the command buffers */
> if (lbs_allocate_cmd_buffer(priv)) {
> - lbs_pr_err("Out of memory allocating command buffers\n");
> + pr_err("Out of memory allocating command buffers\n");
> ret = -ENOMEM;
> goto out;
> }
> @@ -758,7 +759,7 @@ static int lbs_init_adapter(struct lbs_private *priv)
> /* Create the event FIFO */
> ret = kfifo_alloc(&priv->event_fifo, sizeof(u32) * 16, GFP_KERNEL);
> if (ret) {
> - lbs_pr_err("Out of memory allocating event FIFO buffer\n");
> + pr_err("Out of memory allocating event FIFO buffer\n");
> goto out;
> }
>
> @@ -809,7 +810,7 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
> /* Allocate an Ethernet device and register it */
> wdev = lbs_cfg_alloc(dmdev);
> if (IS_ERR(wdev)) {
> - lbs_pr_err("cfg80211 init failed\n");
> + pr_err("cfg80211 init failed\n");
> goto done;
> }
>
> @@ -818,7 +819,7 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
> priv->wdev = wdev;
>
> if (lbs_init_adapter(priv)) {
> - lbs_pr_err("failed to initialize adapter structure.\n");
> + pr_err("failed to initialize adapter structure\n");
> goto err_wdev;
> }
>
> @@ -950,7 +951,7 @@ int lbs_start_card(struct lbs_private *priv)
> goto done;
>
> if (lbs_cfg_register(priv)) {
> - lbs_pr_err("cannot register device\n");
> + pr_err("cannot register device\n");
> goto done;
> }
>
> @@ -960,7 +961,7 @@ int lbs_start_card(struct lbs_private *priv)
>
> lbs_debugfs_init_one(priv, dev);
>
> - lbs_pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name);
> + pr_info("%s: Marvell WLAN 802.11 adapter\n", dev->name);
>
> ret = 0;
>
> @@ -1087,16 +1088,14 @@ int lbs_get_firmware(struct device *dev, const char *user_helper,
> if (user_helper) {
> ret = request_firmware(helper, user_helper, dev);
> if (ret) {
> - lbs_pr_err("couldn't find helper firmware %s",
> - user_helper);
> + pr_err("couldn't find helper firmware %s", user_helper);
> goto fail;
> }
> }
> if (user_mainfw) {
> ret = request_firmware(mainfw, user_mainfw, dev);
> if (ret) {
> - lbs_pr_err("couldn't find main firmware %s",
> - user_mainfw);
> + pr_err("couldn't find main firmware %s", user_mainfw);
> goto fail;
> }
> }
> diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c
> index 9d097b9..f7c51cb 100644
> --- a/drivers/net/wireless/libertas/mesh.c
> +++ b/drivers/net/wireless/libertas/mesh.c
> @@ -1,3 +1,5 @@
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/delay.h>
> #include <linux/etherdevice.h>
> #include <linux/netdevice.h>
> @@ -246,7 +248,7 @@ int lbs_init_mesh(struct lbs_private *priv)
> lbs_add_mesh(priv);
>
> if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
> - lbs_pr_err("cannot register lbs_mesh attribute\n");
> + pr_err("cannot register lbs_mesh attribute\n");
>
> ret = 1;
> }
> @@ -374,7 +376,7 @@ int lbs_add_mesh(struct lbs_private *priv)
> /* Register virtual mesh interface */
> ret = register_netdev(mesh_dev);
> if (ret) {
> - lbs_pr_err("cannot register mshX virtual interface\n");
> + pr_err("cannot register mshX virtual interface\n");
> goto err_free;
> }
>
> @@ -926,7 +928,7 @@ static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr,
> return ret;
>
> if (defs.meshie.val.mesh_id_len > IEEE80211_MAX_SSID_LEN) {
> - lbs_pr_err("inconsistent mesh ID length");
> + pr_err("inconsistent mesh ID length\n");
> defs.meshie.val.mesh_id_len = IEEE80211_MAX_SSID_LEN;
> }
>
> diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
> index a2b1df2..fd045aa 100644
> --- a/drivers/net/wireless/libertas/rx.c
> +++ b/drivers/net/wireless/libertas/rx.c
> @@ -1,6 +1,9 @@
> /**
> * This file contains the handling of RX in wlan driver.
> */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/etherdevice.h>
> #include <linux/slab.h>
> #include <linux/types.h>
> @@ -191,7 +194,7 @@ static u8 convert_mv_rate_to_radiotap(u8 rate)
> case 12: /* 54 Mbps */
> return 108;
> }
> - lbs_pr_alert("Invalid Marvell WLAN rate %i\n", rate);
> + pr_alert("Invalid Marvell WLAN rate %i\n", rate);
> return 0;
> }
>
> @@ -248,7 +251,7 @@ static int process_rxed_802_11_packet(struct lbs_private *priv,
> /* add space for the new radio header */
> if ((skb_headroom(skb) < sizeof(struct rx_radiotap_hdr)) &&
> pskb_expand_head(skb, sizeof(struct rx_radiotap_hdr), 0, GFP_ATOMIC)) {
> - lbs_pr_alert("%s: couldn't pskb_expand_head\n", __func__);
> + pr_alert("%s: couldn't pskb_expand_head\n", __func__);
> ret = -ENOMEM;
> kfree_skb(skb);
> goto done;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists