[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38.4 (moose@chauncey) (gcc version 4.6.1 20110428 (prerelease) (Debian 4.6.0-6) ) #6 SMP PREEMPT Sat May 7 17:08:42 MDT 2011 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38.4 root=UUID=f0797db1-b72e-43bc-9267-1c1f7a3736b5 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077de0000 (usable) [ 0.000000] BIOS-e820: 0000000077de0000 - 0000000077de3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077de3000 - 0000000077df0000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077df0000 - 0000000077e00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F11 09/16/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x77de0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFFC0000000 write-back [ 0.000000] 1 base 000040000000 mask FFFFE0000000 write-back [ 0.000000] 2 base 000060000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 000070000000 mask FFFFF8000000 write-back [ 0.000000] 4 base 000077E00000 mask FFFFFFE00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f54e0] f54e0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-0000000077de0000 [ 0.000000] 0000000000 - 0040000000 page 1G [ 0.000000] 0040000000 - 0077c00000 page 2M [ 0.000000] 0077c00000 - 0077de0000 page 4k [ 0.000000] kernel direct mapping tables up to 77de0000 @ 1fffd000-20000000 [ 0.000000] RAMDISK: 35f94000 - 36fc2000 [ 0.000000] ACPI: RSDP 00000000000f6e40 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0000000077de3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0000000077de3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0000000077de30c0 069CD (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0000000077de0000 00040 [ 0.000000] ACPI: SSDT 0000000077de9b80 00544 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 0000000077dea100 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0000000077dea140 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 0000000077de9ac0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000077de0000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000077de0000 [ 0.000000] NODE_DATA [0000000077ddb000 - 0000000077ddffff] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880075600000-ffff8800771fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00077de0 [ 0.000000] On node 0 totalpages: 490863 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6657 pages used for memmap [ 0.000000] DMA32 zone: 480223 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 77e00000 (gap: 77e00000:68200000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880077a00000 s74880 r8192 d23424 u524288 [ 0.000000] pcpu-alloc: s74880 r8192 d23424 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 484144 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38.4 root=UUID=f0797db1-b72e-43bc-9267-1c1f7a3736b5 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c10000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1909532k/1963904k available (2847k kernel code, 452k absent, 53920k reserved, 3777k data, 544k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2209.922 MHz processor. [ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.84 BogoMIPS (lpj=2209922) [ 0.001008] pid_max: default: 32768 minimum: 301 [ 0.002015] Security Framework initialized [ 0.002208] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003101] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.003470] Mount-cache hash table entries: 256 [ 0.003602] Initializing cgroup subsys ns [ 0.003606] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.003609] Initializing cgroup subsys cpuacct [ 0.003614] Initializing cgroup subsys devices [ 0.003616] Initializing cgroup subsys freezer [ 0.003618] Initializing cgroup subsys blkio [ 0.003649] tseg: 0077e00000 [ 0.003652] CPU: Physical Processor ID: 0 [ 0.003653] CPU: Processor Core ID: 0 [ 0.003656] mce: CPU supports 6 MCE banks [ 0.003694] ACPI: Core revision 20110112 [ 0.007085] Setting APIC routing to flat [ 0.008183] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.018193] CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.018998] Performance Events: AMD PMU driver. [ 0.018998] ... version: 0 [ 0.018998] ... bit width: 48 [ 0.018998] ... generic registers: 4 [ 0.018998] ... value mask: 0000ffffffffffff [ 0.018998] ... max period: 00007fffffffffff [ 0.018998] ... fixed-purpose events: 0 [ 0.018998] ... event mask: 000000000000000f [ 0.021046] NMI watchdog enabled, takes one hw-pmu counter. [ 0.025025] Booting Node 0, Processors #1 [ 0.097007] NMI watchdog enabled, takes one hw-pmu counter. [ 0.100011] #2 [ 0.171996] NMI watchdog enabled, takes one hw-pmu counter. [ 0.174999] #3 Ok. [ 0.246984] NMI watchdog enabled, takes one hw-pmu counter. [ 0.247977] Brought up 4 CPUs [ 0.247980] Total of 4 processors activated (17680.87 BogoMIPS). [ 0.249067] devtmpfs: initialized [ 0.252380] NET: Registered protocol family 16 [ 0.252380] node 0 link 0: io port [c000, ffff] [ 0.252380] TOM: 0000000080000000 aka 2048M [ 0.252380] Fam 10h mmconf [e0000000, e00fffff] [ 0.252380] node 0 link 0: mmio [a0000, bffff] [ 0.252380] node 0 link 0: mmio [80000000, dfffffff] [ 0.252380] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.252380] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] [ 0.252380] bus: [00, 03] on node 0 link 0 [ 0.252380] bus: 00 index 0 [io 0x0000-0xffff] [ 0.252380] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.252380] bus: 00 index 2 [mem 0x80000000-0xdfffffff] [ 0.252380] bus: 00 index 3 [mem 0xe0400000-0xfcffffffff] [ 0.252380] bus: 00 index 4 [mem 0xe0100000-0xe03fffff] [ 0.252380] Extended Config Space enabled on 1 nodes [ 0.252380] ACPI: bus type pci registered [ 0.252380] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.252380] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.275935] PCI: Using configuration type 1 for base access [ 0.276310] bio: create slab at 0 [ 0.277732] ACPI: EC: Look up EC in DSDT [ 0.283289] ACPI: Interpreter enabled [ 0.283295] ACPI: (supports S0 S3 S4 S5) [ 0.283317] ACPI: Using IOAPIC for interrupt routing [ 0.308213] ACPI: No dock devices found. [ 0.308216] HEST: Table not found. [ 0.308220] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.308291] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.308441] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.308444] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.308447] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.308450] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.308452] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 0.308455] pci_root PNP0A03:00: host bridge window [mem 0x7ff00000-0xfebfffff] [ 0.308472] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600 [ 0.308485] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.308522] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604 [ 0.308567] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 [ 0.308596] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.308599] pci 0000:00:0a.0: PME# disabled [ 0.308628] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.308649] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 0.308660] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 0.308670] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 0.308681] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 0.308691] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 0.308702] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.308749] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.308763] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.308830] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.308845] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.308917] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.308938] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] [ 0.309020] pci 0000:00:12.2: supports D1 D2 [ 0.309023] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.309027] pci 0000:00:12.2: PME# disabled [ 0.309057] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.309071] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.309141] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.309155] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.309228] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.309248] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.309322] pci 0000:00:13.2: supports D1 D2 [ 0.309324] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.309328] pci 0000:00:13.2: PME# disabled [ 0.309354] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.309451] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.309469] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.309479] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.309489] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.309500] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.309510] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] [ 0.309562] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.309585] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.309646] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.309650] pci 0000:00:14.2: PME# disabled [ 0.309665] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.309743] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.309787] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.309801] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] [ 0.309872] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.309891] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.309907] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.309923] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.309942] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.309995] pci 0000:01:05.0: [1002:9610] type 0 class 0x000300 [ 0.310004] pci 0000:01:05.0: reg 10: [mem 0xd8000000-0xdfffffff pref] [ 0.310010] pci 0000:01:05.0: reg 14: [io 0xee00-0xeeff] [ 0.310015] pci 0000:01:05.0: reg 18: [mem 0xfdfe0000-0xfdfeffff] [ 0.310026] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff] [ 0.310040] pci 0000:01:05.0: supports D1 D2 [ 0.310051] pci 0000:01:05.1: [1002:960f] type 0 class 0x000403 [ 0.310060] pci 0000:01:05.1: reg 10: [mem 0xfdffc000-0xfdffffff] [ 0.310089] pci 0000:01:05.1: supports D1 D2 [ 0.310128] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.310132] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.310135] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.310140] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.310179] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.310192] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff] [ 0.310214] pci 0000:02:00.0: reg 18: [mem 0xfdbff000-0xfdbfffff 64bit pref] [ 0.310229] pci 0000:02:00.0: reg 20: [mem 0xfdbe0000-0xfdbeffff 64bit pref] [ 0.310239] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.310269] pci 0000:02:00.0: supports D1 D2 [ 0.310272] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.310276] pci 0000:02:00.0: PME# disabled [ 0.311975] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.311980] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.311983] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.311987] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.312025] pci 0000:03:06.0: [4444:0016] type 0 class 0x000400 [ 0.312049] pci 0000:03:06.0: reg 10: [mem 0xf8000000-0xfbffffff pref] [ 0.312162] pci 0000:03:07.0: [4444:0016] type 0 class 0x000400 [ 0.312186] pci 0000:03:07.0: reg 10: [mem 0xf4000000-0xf7ffffff pref] [ 0.312321] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.312326] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.312331] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.312336] pci 0000:00:14.4: bridge window [mem 0xf4000000-0xfbffffff pref] [ 0.312339] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.312342] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.312344] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.312347] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.312350] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 0.312353] pci 0000:00:14.4: bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode) [ 0.312367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.312645] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.312744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.312787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.312837] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.327569] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.327614] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.327664] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.327723] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.327776] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.327826] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.327874] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.327924] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.328043] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.328048] vgaarb: loaded [ 0.328077] PCI: Using ACPI for IRQ routing [ 0.328080] PCI: pci_cache_line_size set to 64 bytes [ 0.328089] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.328177] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.328181] reserve RAM buffer: 0000000077de0000 - 0000000077ffffff [ 0.328290] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.328295] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.330001] Switching to clocksource hpet [ 0.330557] Switched to NOHz mode on CPU #0 [ 0.330681] Switched to NOHz mode on CPU #3 [ 0.330691] Switched to NOHz mode on CPU #2 [ 0.330701] Switched to NOHz mode on CPU #1 [ 0.331331] pnp: PnP ACPI init [ 0.331355] ACPI: bus type pnp registered [ 0.331450] pnp 00:00: [bus 00-ff] [ 0.331455] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.331458] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.331460] pnp 00:00: [io 0x0d00-0xffff window] [ 0.331462] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.331465] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.331467] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.331470] pnp 00:00: [mem 0x7ff00000-0xfebfffff window] [ 0.331523] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.331536] pnp 00:01: [io 0x0010-0x001f] [ 0.331539] pnp 00:01: [io 0x0022-0x003f] [ 0.331541] pnp 00:01: [io 0x0044-0x004d] [ 0.331543] pnp 00:01: [io 0x0050-0x005f] [ 0.331550] pnp 00:01: [io 0x0062-0x0063] [ 0.331552] pnp 00:01: [io 0x0065-0x006f] [ 0.331554] pnp 00:01: [io 0x0074-0x007f] [ 0.331556] pnp 00:01: [io 0x0091-0x0093] [ 0.331558] pnp 00:01: [io 0x00a2-0x00bf] [ 0.331560] pnp 00:01: [io 0x00e0-0x00ef] [ 0.331562] pnp 00:01: [io 0x04d0-0x04d1] [ 0.331564] pnp 00:01: [io 0x0220-0x0225] [ 0.331566] pnp 00:01: [io 0x0290-0x0294] [ 0.331637] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.331640] system 00:01: [io 0x0220-0x0225] has been reserved [ 0.331643] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.331647] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.360079] pnp 00:02: [io 0x4100-0x411f] [ 0.360081] pnp 00:02: [io 0x0228-0x022f] [ 0.360084] pnp 00:02: [io 0x0238-0x023f] [ 0.360086] pnp 00:02: [io 0x040b] [ 0.360088] pnp 00:02: [io 0x04d6] [ 0.360090] pnp 00:02: [io 0x0c00-0x0c01] [ 0.360092] pnp 00:02: [io 0x0c14] [ 0.360094] pnp 00:02: [io 0x0c50-0x0c52] [ 0.360096] pnp 00:02: [io 0x0c6c-0x0c6d] [ 0.360098] pnp 00:02: [io 0x0c6f] [ 0.360100] pnp 00:02: [io 0x0cd0-0x0cd1] [ 0.360102] pnp 00:02: [io 0x0cd2-0x0cd3] [ 0.360104] pnp 00:02: [io 0x0cd4-0x0cdf] [ 0.360106] pnp 00:02: [io 0x4000-0x40fe] [ 0.360108] pnp 00:02: [io 0x4210-0x4217] [ 0.360110] pnp 00:02: [io 0x0b00-0x0b0f] [ 0.360112] pnp 00:02: [io 0x0b10-0x0b1f] [ 0.360114] pnp 00:02: [io 0x0b20-0x0b3f] [ 0.360117] pnp 00:02: [mem 0x00000000-0x00000fff window] [ 0.360119] pnp 00:02: [mem 0xfee00400-0xfee00fff window] [ 0.360125] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.360162] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.360209] system 00:02: [io 0x4100-0x411f] has been reserved [ 0.360212] system 00:02: [io 0x0228-0x022f] has been reserved [ 0.360215] system 00:02: [io 0x0238-0x023f] has been reserved [ 0.360218] system 00:02: [io 0x040b] has been reserved [ 0.360221] system 00:02: [io 0x04d6] has been reserved [ 0.360223] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.360226] system 00:02: [io 0x0c14] has been reserved [ 0.360229] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.360232] system 00:02: [io 0x0c6c-0x0c6d] has been reserved [ 0.360235] system 00:02: [io 0x0c6f] has been reserved [ 0.360237] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.360240] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.360243] system 00:02: [io 0x0cd4-0x0cdf] has been reserved [ 0.360246] system 00:02: [io 0x4000-0x40fe] has been reserved [ 0.360249] system 00:02: [io 0x4210-0x4217] has been reserved [ 0.360252] system 00:02: [io 0x0b00-0x0b0f] has been reserved [ 0.360254] system 00:02: [io 0x0b10-0x0b1f] has been reserved [ 0.360257] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.360261] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.360264] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.360387] pnp 00:03: [dma 4] [ 0.360391] pnp 00:03: [io 0x0000-0x000f] [ 0.360393] pnp 00:03: [io 0x0080-0x0090] [ 0.360396] pnp 00:03: [io 0x0094-0x009f] [ 0.360398] pnp 00:03: [io 0x00c0-0x00df] [ 0.360436] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.360499] pnp 00:04: [irq 0 disabled] [ 0.360513] pnp 00:04: [irq 8] [ 0.360515] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.360559] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.360594] pnp 00:05: [io 0x0070-0x0073] [ 0.360630] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.360644] pnp 00:06: [io 0x0061] [ 0.360685] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.360699] pnp 00:07: [io 0x00f0-0x00ff] [ 0.360707] pnp 00:07: [irq 13] [ 0.360743] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.361137] pnp 00:08: [mem 0xe0000000-0xefffffff] [ 0.361221] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.361230] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.361388] pnp 00:09: [mem 0x000d1c00-0x000d3fff] [ 0.361392] pnp 00:09: [mem 0x000f0000-0x000f7fff] [ 0.361394] pnp 00:09: [mem 0x000f8000-0x000fbfff] [ 0.361397] pnp 00:09: [mem 0x000fc000-0x000fffff] [ 0.361399] pnp 00:09: [mem 0x77de0000-0x77dfffff] [ 0.361401] pnp 00:09: [mem 0xffff0000-0xffffffff] [ 0.361403] pnp 00:09: [mem 0x00000000-0x0009ffff] [ 0.361406] pnp 00:09: [mem 0x00100000-0x77ddffff] [ 0.361408] pnp 00:09: [mem 0x77ef0000-0x7feeffff] [ 0.361410] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.361412] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.361415] pnp 00:09: [mem 0xfff80000-0xfffeffff] [ 0.361420] pnp 00:09: disabling [mem 0x000d1c00-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.361426] pnp 00:09: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.361430] pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.361434] pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.361438] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.361442] pnp 00:09: disabling [mem 0x00100000-0x77ddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.361528] system 00:09: [mem 0x77de0000-0x77dfffff] could not be reserved [ 0.361532] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved [ 0.361535] system 00:09: [mem 0x77ef0000-0x7feeffff] could not be reserved [ 0.361543] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.361546] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.361550] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.361553] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.361574] pnp: PnP ACPI: found 10 devices [ 0.361578] ACPI: ACPI bus type pnp unregistered [ 0.368589] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.368592] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.368596] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff] [ 0.368600] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.368606] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref] [ 0.368609] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.368612] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.368616] pci 0000:00:0a.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.368619] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.368624] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.368627] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.368633] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.368638] pci 0000:00:14.4: bridge window [mem 0xf4000000-0xfbffffff pref] [ 0.368663] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.368667] pci 0000:00:0a.0: setting latency timer to 64 [ 0.368675] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.368677] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.368680] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.368682] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.368685] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.368687] pci_bus 0000:00: resource 9 [mem 0x7ff00000-0xfebfffff] [ 0.368690] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.368692] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff] [ 0.368695] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.368698] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.368700] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.368703] pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.368706] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.368708] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.368711] pci_bus 0000:03: resource 2 [mem 0xf4000000-0xfbffffff pref] [ 0.368718] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.368721] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.368723] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.368726] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] [ 0.368728] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.368731] pci_bus 0000:03: resource 9 [mem 0x7ff00000-0xfebfffff] [ 0.368769] NET: Registered protocol family 2 [ 0.368905] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.369851] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.371508] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.371893] TCP: Hash tables configured (established 262144 bind 65536) [ 0.371896] TCP reno registered [ 0.371905] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.371925] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.372066] NET: Registered protocol family 1 [ 0.372079] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.488060] pci 0000:01:05.0: Boot video device [ 0.488075] PCI: CLS 4 bytes, default 64 [ 0.488138] Unpacking initramfs... [ 0.882516] Freeing initrd memory: 16568k freed [ 0.890724] audit: initializing netlink socket (disabled) [ 0.890744] type=2000 audit(1304813191.889:1): initialized [ 0.901820] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.904145] VFS: Disk quotas dquot_6.5.2 [ 0.904216] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.904317] msgmni has been set to 3761 [ 0.904552] alg: No test for stdrng (krng) [ 0.904611] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.904648] io scheduler noop registered [ 0.904651] io scheduler deadline registered [ 0.904690] io scheduler cfq registered (default) [ 0.904869] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.904906] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X [ 0.905116] ERST: Table is not found! [ 0.905202] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.969304] Linux agpgart interface v0.103 [ 0.969376] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.969844] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.969871] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.970124] mousedev: PS/2 mouse device common for all mice [ 0.970165] rtc_cmos 00:05: RTC can wake from S4 [ 0.977068] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.977102] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.977113] cpuidle: using governor ladder [ 0.977115] cpuidle: using governor menu [ 0.977440] TCP cubic registered [ 0.977590] NET: Registered protocol family 10 [ 0.978411] Mobile IPv6 [ 0.978414] NET: Registered protocol family 17 [ 0.978418] Registering the dns_resolver key type [ 0.978548] PM: Hibernation image not present or could not be loaded. [ 0.978560] registered taskstats version 1 [ 0.978967] rtc_cmos 00:05: setting system clock to 2011-05-08 00:06:32 UTC (1304813192) [ 0.978992] Initalizing network drop monitor service [ 0.980280] Freeing unused kernel memory: 544k freed [ 0.980447] Write protecting the kernel read-only data: 6144k [ 0.986223] Freeing unused kernel memory: 1232k freed [ 0.990887] Freeing unused kernel memory: 904k freed [ 1.008395] <30>udevd[89]: starting version 168 [ 1.077234] SCSI subsystem initialized [ 1.090057] [drm] Initialized drm 1.1.0 20060810 [ 1.107184] libata version 3.00 loaded. [ 1.119037] ahci 0000:00:11.0: version 3.0 [ 1.119073] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.119221] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.119225] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.120399] scsi0 : ahci [ 1.120533] scsi1 : ahci [ 1.120617] scsi2 : ahci [ 1.120698] scsi3 : ahci [ 1.120785] scsi4 : ahci [ 1.120867] scsi5 : ahci [ 1.121054] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.121058] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.121062] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.121066] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.121069] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 1.121073] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 1.154066] [drm] radeon kernel modesetting enabled. [ 1.154201] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.154206] radeon 0000:01:05.0: setting latency timer to 64 [ 1.156507] [drm] initializing kernel modesetting (RS780 0x1002:0x9610). [ 1.156531] [drm] register mmio base: 0xFDFE0000 [ 1.156533] [drm] register mmio size: 65536 [ 1.158851] ATOM BIOS: B27721 [ 1.158873] radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used) [ 1.158876] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 1.160125] [drm] Detected VRAM RAM=128M, BAR=128M [ 1.160130] [drm] RAM width 32bits DDR [ 1.160218] [TTM] Zone kernel: Available graphics memory: 964390 kiB. [ 1.160220] [TTM] Initializing pool allocator. [ 1.160244] [drm] radeon: 128M of VRAM memory ready [ 1.160246] [drm] radeon: 512M of GTT memory ready. [ 1.160276] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.160278] [drm] Driver supports precise vblank timestamp query. [ 1.160311] [drm] radeon: irq initialized. [ 1.160314] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.161216] [drm] Loading RS780 Microcode [ 1.174536] radeon 0000:01:05.0: WB enabled [ 1.205951] [drm] ring test succeeded in 1 usecs [ 1.206120] [drm] radeon: ib pool ready. [ 1.206199] [drm] ib test succeeded in 0 usecs [ 1.206202] [drm] Enabling audio support [ 1.206210] failed to evaluate ATIF got AE_BAD_PARAMETER [ 1.206490] [drm] Radeon Display Connectors [ 1.206492] [drm] Connector 0: [ 1.206494] [drm] VGA [ 1.206497] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 1.206501] [drm] Encoders: [ 1.206504] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 1.206506] [drm] Connector 1: [ 1.206508] [drm] HDMI-A [ 1.206510] [drm] HPD1 [ 1.206513] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 1.206516] [drm] Encoders: [ 1.206518] [drm] DFP1: INTERNAL_KLDSCP_LVTMA [ 1.311492] [drm] radeon: power management initialized [ 1.426048] ata5: SATA link down (SStatus 0 SControl 300) [ 1.426154] ata4: SATA link down (SStatus 0 SControl 300) [ 1.426190] ata6: SATA link down (SStatus 0 SControl 300) [ 1.438934] [drm] fb mappable at 0xD8141000 [ 1.438936] [drm] vram apper at 0xD8000000 [ 1.438938] [drm] size 8294400 [ 1.438939] [drm] fb depth is 24 [ 1.438941] [drm] pitch is 7680 [ 1.453348] Console: switching to colour frame buffer device 240x67 [ 1.463506] fb0: radeondrmfb frame buffer device [ 1.463508] drm: registered panic notifier [ 1.463514] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0 [ 1.581057] ata3: softreset failed (device not ready) [ 1.581109] ata3: applying SB600 PMP SRST workaround and retrying [ 1.581127] ata2: softreset failed (device not ready) [ 1.581178] ata2: applying SB600 PMP SRST workaround and retrying [ 1.581196] ata1: softreset failed (device not ready) [ 1.581249] ata1: applying SB600 PMP SRST workaround and retrying [ 1.736074] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.736103] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.736129] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.736253] ata1.00: HPA detected: current 62525039, native 62533296 [ 1.736295] ata1.00: ATA-7: OCZ-VERTEX v1.10, 1370, max UDMA/133 [ 1.736299] ata1.00: 62525039 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.736534] ata1.00: configured for UDMA/133 [ 1.736568] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB02, max UDMA/100 [ 1.736711] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX v1.10 1370 PQ: 0 ANSI: 5 [ 1.737309] ata2.00: configured for UDMA/100 [ 1.738182] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB02 PQ: 0 ANSI: 5 [ 1.779145] ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 [ 1.779148] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.837454] ata3.00: configured for UDMA/133 [ 1.837543] scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 1.847505] sd 0:0:0:0: [sda] 62525039 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.847531] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.847690] sd 2:0:0:0: [sdb] Write Protect is off [ 1.847696] sd 0:0:0:0: [sda] Write Protect is off [ 1.847700] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.847705] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.847742] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.847759] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.848288] sda: sda1 [ 1.848597] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.877480] sdb: sdb1 sdb2 [ 1.877833] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.892046] Refined TSC clocksource calibration: 2210.064 MHz. [ 1.892051] Switching to clocksource tsc [ 3.117735] device-mapper: uevent: version 1.0.3 [ 3.117926] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 3.138227] PM: Starting manual resume from disk [ 3.138231] PM: Hibernation image partition 8:17 present [ 3.138233] PM: Looking for hibernation image. [ 3.138425] PM: Image not found (code -22) [ 3.138429] PM: Hibernation image not present or could not be loaded. [ 3.170677] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.366770] <30>udevd[392]: starting version 168 [ 3.422124] wmi: Mapper loaded [ 3.426229] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 3.426237] ACPI: Power Button [PWRB] [ 3.426325] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.426329] ACPI: Power Button [PWRF] [ 3.439549] ACPI: acpi_idle registered with cpuidle [ 3.452642] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.466366] MCE: In-kernel MCE decoding enabled. [ 3.467762] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.467794] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.467834] r8169 0000:02:00.0: setting latency timer to 64 [ 3.467882] r8169 0000:02:00.0: irq 41 for MSI/MSI-X [ 3.468584] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000336000, 00:1f:d0:82:55:1c, XID 1c4000c0 IRQ 41 [ 3.469045] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 3.478040] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled [ 3.480831] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] [ 3.480836] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.489972] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602 [ 3.489978] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 3.490083] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.494518] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.495161] scsi6 : pata_atiixp [ 3.495418] scsi7 : pata_atiixp [ 3.496079] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 3.496082] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 3.533032] EDAC MC: Ver: 2.1.0 May 7 2011 [ 3.614070] usbcore: registered new interface driver usbfs [ 3.614107] usbcore: registered new interface driver hub [ 3.614184] usbcore: registered new device driver usb [ 3.634256] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.635261] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.635289] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 3.635321] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 3.639034] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.639053] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 3.639067] ehci_hcd 0000:00:12.2: debug port 1 [ 3.639099] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 3.645018] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 3.645047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.645050] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.645053] usb usb1: Product: EHCI Host Controller [ 3.645055] usb usb1: Manufacturer: Linux 2.6.38.4 ehci_hcd [ 3.645057] usb usb1: SerialNumber: 0000:00:12.2 [ 3.645198] hub 1-0:1.0: USB hub found [ 3.645204] hub 1-0:1.0: 6 ports detected [ 3.645386] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.645407] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 3.645418] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 3.661881] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.661898] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 3.661914] ehci_hcd 0000:00:13.2: debug port 1 [ 3.661952] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 3.667014] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 3.667046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.667049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.667052] usb usb2: Product: EHCI Host Controller [ 3.667054] usb usb2: Manufacturer: Linux 2.6.38.4 ehci_hcd [ 3.667056] usb usb2: SerialNumber: 0000:00:13.2 [ 3.667225] hub 2-0:1.0: USB hub found [ 3.667231] hub 2-0:1.0: 6 ports detected [ 3.668946] EDAC amd64_edac: v3.3.0 [ 3.669064] EDAC amd64: DRAM ECC disabled. [ 3.669073] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.669074] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 3.669076] (Note that use of the override may cause unknown side effects.) [ 3.683676] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.683682] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.683861] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.695068] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.695283] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.695308] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 3.695321] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 3.704068] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 3.705197] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.705263] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.705307] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.759064] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.759069] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.759072] usb usb3: Product: OHCI Host Controller [ 3.759074] usb usb3: Manufacturer: Linux 2.6.38.4 ohci_hcd [ 3.759077] usb usb3: SerialNumber: 0000:00:12.0 [ 3.759248] hub 3-0:1.0: USB hub found [ 3.759256] hub 3-0:1.0: 3 ports detected [ 3.759436] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.759460] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 3.759472] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 3.767076] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 3.822057] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.822061] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.822065] usb usb4: Product: OHCI Host Controller [ 3.822067] usb usb4: Manufacturer: Linux 2.6.38.4 ohci_hcd [ 3.822069] usb usb4: SerialNumber: 0000:00:12.1 [ 3.822212] hub 4-0:1.0: USB hub found [ 3.822220] hub 4-0:1.0: 3 ports detected [ 3.822402] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.822430] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.822442] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 3.831047] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 3.886053] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.886057] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.886059] usb usb5: Product: OHCI Host Controller [ 3.886061] usb usb5: Manufacturer: Linux 2.6.38.4 ohci_hcd [ 3.886063] usb usb5: SerialNumber: 0000:00:13.0 [ 3.886196] hub 5-0:1.0: USB hub found [ 3.886203] hub 5-0:1.0: 3 ports detected [ 3.886357] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.886376] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 3.886387] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 3.891032] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 3.946052] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.946055] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.946057] usb usb6: Product: OHCI Host Controller [ 3.946059] usb usb6: Manufacturer: Linux 2.6.38.4 ohci_hcd [ 3.946062] usb usb6: SerialNumber: 0000:00:13.1 [ 3.946191] hub 6-0:1.0: USB hub found [ 3.946197] hub 6-0:1.0: 3 ports detected [ 3.946339] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.946344] hda_intel: position_fix set to 1 for device 1458:a022 [ 3.976089] hda_codec: ALC889A: BIOS auto-probing. [ 3.983293] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input3 [ 3.983503] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.983522] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 3.983535] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 3.983552] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.983572] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 3.990022] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 4.045069] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.045073] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.045076] usb usb7: Product: OHCI Host Controller [ 4.045078] usb usb7: Manufacturer: Linux 2.6.38.4 ohci_hcd [ 4.045080] usb usb7: SerialNumber: 0000:00:14.5 [ 4.045239] hub 7-0:1.0: USB hub found [ 4.045248] hub 7-0:1.0: 2 ports detected [ 4.050017] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 4.166550] usb 2-2: New USB device found, idVendor=058f, idProduct=6362 [ 4.166554] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.166557] usb 2-2: Product: Mass Storage Device [ 4.166560] usb 2-2: Manufacturer: Generic [ 4.166562] usb 2-2: SerialNumber: 058F63626376 [ 4.289031] usb 4-2: new low speed USB device using ohci_hcd and address 2 [ 4.441076] usb 4-2: New USB device found, idVendor=04b3, idProduct=3025 [ 4.441079] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.441082] usb 4-2: Product: USB NetVista Full Width Keyboard. [ 4.441084] usb 4-2: Manufacturer: LITE-ON Technology [ 4.572026] usb 4-3: new low speed USB device using ohci_hcd and address 3 [ 4.722087] usb 4-3: New USB device found, idVendor=046d, idProduct=c517 [ 4.722091] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.722094] usb 4-3: Product: USB Receiver [ 4.722096] usb 4-3: Manufacturer: Logitech [ 4.733542] usbcore: registered new interface driver uas [ 4.742519] usbcore: registered new interface driver libusual [ 4.763602] Initializing USB Mass Storage driver... [ 4.763758] scsi8 : usb-storage 2-2:1.0 [ 4.763943] usbcore: registered new interface driver usb-storage [ 4.763948] USB Mass Storage support registered. [ 4.784115] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input4 [ 4.784238] generic-usb 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:12.1-2/input0 [ 4.784377] usbcore: registered new interface driver usbhid [ 4.784380] usbhid: USB HID core driver [ 4.807133] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input5 [ 4.807255] logitech 0003:046D:C517.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.1-3/input0 [ 4.814085] logitech 0003:046D:C517.0003: fixing up Logitech keyboard report descriptor [ 4.814686] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input6 [ 4.814907] logitech 0003:046D:C517.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-3/input1 [ 5.763667] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 5.764154] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 5.764653] scsi 8:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 [ 5.765159] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 5.765719] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 5.765928] sd 8:0:0:1: Attached scsi generic sg4 type 0 [ 5.766134] sd 8:0:0:2: Attached scsi generic sg5 type 0 [ 5.766338] sd 8:0:0:3: Attached scsi generic sg6 type 0 [ 5.771530] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 5.772148] sd 8:0:0:1: [sdd] Attached SCSI removable disk [ 5.773404] sd 8:0:0:3: [sdf] Attached SCSI removable disk [ 5.774045] sd 8:0:0:2: [sde] Attached SCSI removable disk [ 6.928162] Adding 7815584k swap on /dev/sdb1. Priority:-1 extents:1 across:7815584k [ 6.932471] EXT4-fs (sda1): re-mounted. Opts: (null) [ 6.957046] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 6.988593] loop: module loaded [ 7.026424] it87: Found IT8718F chip at 0x228, revision 5 [ 7.026447] it87: Beeping is supported [ 7.705368] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 7.759124] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 7.853962] r8169 0000:02:00.0: eth0: link down [ 7.853971] r8169 0000:02:00.0: eth0: link down [ 7.854271] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.992612] r8169 0000:02:00.0: eth0: link up [ 9.992887] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.764342] RPC: Registered udp transport module. [ 14.764346] RPC: Registered tcp transport module. [ 14.764348] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 14.801909] FS-Cache: Loaded [ 14.936689] FS-Cache: Netfs 'nfs' registered for caching [ 14.994055] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 15.109851] fuse init (API version 7.16) [ 15.343622] powernow-k8: Found 1 AMD Phenom(tm) 9550 Quad-Core Processor (4 cpu cores) (version 2.20.00) [ 15.343697] powernow-k8: 0 : pstate 0 (2200 MHz) [ 15.343701] powernow-k8: 1 : pstate 1 (1100 MHz) [ 19.137978] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 19.183318] EXT4-fs (dm-0): re-mounted. Opts: commit=0 [ 19.275994] EXT4-fs (dm-1): re-mounted. Opts: commit=0 [ 20.626008] eth0: no IPv6 routers present