linux-kernel - [PATCH 14/19] mfd: Use mfd cell platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <1304901131-7104-15-git-send-email-sameo@linux.intel.com>
Date:	Mon,  9 May 2011 02:32:06 +0200
From:	Samuel Ortiz <sameo@...ux.intel.com>
To:	linux-kernel <linux-kernel@...r.kernel.org>
Cc:	Samuel Ortiz <sameo@...ux.intel.com>,
	"Ira W. Snyder" <iws@...o.caltech.edu>,
	Wolfgang Grandegger <wg@...ndegger.com>,
	Grant Likely <grant.likely@...retlab.ca>
Subject: [PATCH 14/19] mfd: Use mfd cell platform_data for janz cells platform bits

With the addition of a platform device mfd_cell pointer, MFD drivers
can go back to passing platform data back to their sub drivers.
This allows for an mfd_cell->mfd_data removal and thus keep the
sub drivers MFD agnostic. This is mostly needed for non MFD aware
sub drivers.

Cc: Ira W. Snyder <iws@...o.caltech.edu>
Cc: Wolfgang Grandegger <wg@...ndegger.com>
Cc: Grant Likely <grant.likely@...retlab.ca>
Signed-off-by: Samuel Ortiz <sameo@...ux.intel.com>
---
 drivers/gpio/janz-ttl.c      |    3 +--
 drivers/mfd/janz-cmodio.c    |    3 ++-
 drivers/net/can/janz-ican3.c |    3 +--
 3 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/janz-ttl.c b/drivers/gpio/janz-ttl.c
index 2514fb0..813ac07 100644
--- a/drivers/gpio/janz-ttl.c
+++ b/drivers/gpio/janz-ttl.c
@@ -15,7 +15,6 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/mfd/core.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
@@ -150,7 +149,7 @@ static int __devinit ttl_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret;
 
-	pdata = mfd_get_data(pdev);
+	pdata = pdev->dev.platform_data;
 	if (!pdata) {
 		dev_err(dev, "no platform data\n");
 		ret = -ENXIO;
diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c
index fc41911..5c2a06a 100644
--- a/drivers/mfd/janz-cmodio.c
+++ b/drivers/mfd/janz-cmodio.c
@@ -86,7 +86,8 @@ static int __devinit cmodio_setup_subdevice(struct cmodio_device *priv,
 
 	/* Add platform data */
 	pdata->modno = modno;
-	cell->mfd_data = pdata;
+	cell->platform_data = pdata;
+	cell->pdata_size = sizeof(*pdata);
 
 	/* MODULbus registers -- PCI BAR3 is big-endian MODULbus access */
 	res->flags = IORESOURCE_MEM;
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 587fba4..f1942ca 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -15,7 +15,6 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/mfd/core.h>
 
 #include <linux/netdevice.h>
 #include <linux/can.h>
@@ -1644,7 +1643,7 @@ static int __devinit ican3_probe(struct platform_device *pdev)
 	struct device *dev;
 	int ret;
 
-	pdata = mfd_get_data(pdev);
+	pdata = pdev->dev.platform_data;
 	if (!pdata)
 		return -ENXIO;
 
-- 
1.7.2.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/