linux-kernel - 2.6.39-rc6: SATA hangs for a few seconds during boot

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20110509204801.GA2258@x61.home>
Date:	Mon, 9 May 2011 22:48:01 +0200
From:	Tino Keitel <tino.keitel@...ei.de>
To:	linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org
Subject: 2.6.39-rc6: SATA hangs for a few seconds during boot

Hi,

I get a hanging SATA port for a few seconds during boot, with these
kernel messages:

ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen
ata1.00: cmd 60/20:00:55:e1:65/00:00:00:00:00/40 tag 0 ncq 16384 in
         res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: cmd 60/02:08:c1:5c:03/00:00:00:00:00/40 tag 1 ncq 1024 in
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: both IDENTIFYs aborted, assuming NODEV
ata1.00: revalidation failed (errno=-2)
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1: EH complete

This happens with 2.6.39-rc6 with TuxOnIce patch included, but during boot
without any suspend actions. The hardware is a ThinkPad X61s:

00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller (rev 03)

Complete dmesg is attached.

Regards,
Tino

Download attachment "dmesg.xz" of type "application/octet-stream" (9732 bytes)