[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1304986748-15809-2-git-send-email-decot@google.com>
Date: Mon, 9 May 2011 17:19:07 -0700
From: David Decotigny <decot@...gle.com>
To: Giuseppe Cavallaro <peppe.cavallaro@...com>,
"David S. Miller" <davem@...emloft.net>,
Joe Perches <joe@...ches.com>,
Stanislaw Gruszka <sgruszka@...hat.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: David Decotigny <decot@...gle.com>
Subject: [PATCH 1/2] net/stmmac: don't go through ethtool to start autonegociation
The driver used to call phy's ethtool configuration routine to start
autonegociation. This change has it call directly phy's routine to
start autonegociation.
IMPORTANT: initial version was hiding phy_start_aneg() return value,
this patch returns it (<0 upon error).
Tested: module compiles, NOT tested on real hardware.
Signed-off-by: David Decotigny <decot@...gle.com>
---
drivers/net/stmmac/stmmac_ethtool.c | 13 ++-----------
1 files changed, 2 insertions(+), 11 deletions(-)
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
index 6f5aaeb..9c05cf0 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -236,17 +236,8 @@ stmmac_set_pauseparam(struct net_device *netdev,
priv->flow_ctrl = new_pause;
if (phy->autoneg) {
- if (netif_running(netdev)) {
- struct ethtool_cmd cmd = { .cmd = ETHTOOL_SSET };
- /* auto-negotiation automatically restarted */
- cmd.supported = phy->supported;
- cmd.advertising = phy->advertising;
- cmd.autoneg = phy->autoneg;
- ethtool_cmd_speed_set(&cmd, phy->speed);
- cmd.duplex = phy->duplex;
- cmd.phy_address = phy->addr;
- ret = phy_ethtool_sset(phy, &cmd);
- }
+ if (netif_running(netdev))
+ ret = phy_start_aneg(phy);
} else
priv->hw->mac->flow_ctrl(priv->ioaddr, phy->duplex,
priv->flow_ctrl, priv->pause);
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists