[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20110512093433.GD1356@n2100.arm.linux.org.uk>
Date: Thu, 12 May 2011 10:34:34 +0100
From: Russell King - ARM Linux <linux@....linux.org.uk>
To: Josh Wu <josh.wu@...el.com>
Cc: mchehab@...hat.com, linux-media@...r.kernel.org,
lars.haring@...el.com, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, g.liakhovetski@....de
Subject: Re: [PATCH] [media] at91: add Atmel Image Sensor Interface (ISI)
support
On Thu, May 12, 2011 at 03:42:18PM +0800, Josh Wu wrote:
> This patch is to enable Atmel Image Sensor Interface (ISI) driver support.
> - Using soc-camera framework with videobuf2 dma-contig allocator
> - Supporting video streaming of YUV packed format
> - Tested on AT91SAM9M10G45-EK with OV2640
A few more points...
> +static int __init atmel_isi_probe(struct platform_device *pdev)
Should be __devinit otherwise you'll have section errors.
> +{
> + unsigned int irq;
> + struct atmel_isi *isi;
> + struct clk *pclk;
> + struct resource *regs;
> + int ret;
> + struct device *dev = &pdev->dev;
> + struct isi_platform_data *pdata;
> + struct soc_camera_host *soc_host;
> +
> + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!regs)
> + return -ENXIO;
> +
> + pclk = clk_get(&pdev->dev, "isi_clk");
> + if (IS_ERR(pclk))
> + return PTR_ERR(pclk);
> +
> + clk_enable(pclk);
Return value of clk_enable() should be checked.
> +
> + isi = kzalloc(sizeof(struct atmel_isi), GFP_KERNEL);
> + if (!isi) {
> + ret = -ENOMEM;
> + dev_err(&pdev->dev, "can't allocate interface!\n");
> + goto err_alloc_isi;
> + }
> +
> + isi->pclk = pclk;
> +
> + spin_lock_init(&isi->lock);
> + init_waitqueue_head(&isi->capture_wq);
> +
> + isi->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
> + if (IS_ERR(isi->alloc_ctx)) {
> + ret = PTR_ERR(isi->alloc_ctx);
> + goto err_alloc_isi;
> + }
> +
> + isi->regs = ioremap(regs->start, resource_size(regs));
> + if (!isi->regs) {
> + ret = -ENOMEM;
> + goto err_ioremap;
> + }
> +
> + if (dev->platform_data)
> + pdata = (struct isi_platform_data *) dev->platform_data;
> + else {
> + static struct isi_platform_data isi_default_data = {
> + .frate = 0,
> + .has_emb_sync = 0,
> + .emb_crc_sync = 0,
> + .hsync_act_low = 0,
> + .vsync_act_low = 0,
> + .pclk_act_falling = 0,
> + .isi_full_mode = 1,
> + /* to use codec and preview path simultaneously */
> + .flags = ISI_DATAWIDTH_8 |
> + ISI_DATAWIDTH_10,
> + };
> + dev_info(&pdev->dev,
> + "No config available using default values\n");
> + pdata = &isi_default_data;
> + }
> +
> + isi->pdata = pdata;
> + isi->platform_flags = pdata->flags;
> + if (isi->platform_flags == 0)
> + isi->platform_flags = ISI_DATAWIDTH_8;
> +
> + isi_writel(isi, V2_CTRL, ISI_BIT(V2_DIS));
> + /* Check if module disable */
> + while (isi_readl(isi, V2_STATUS) & ISI_BIT(V2_DIS))
> + cpu_relax();
> +
> + irq = platform_get_irq(pdev, 0);
This should also be checked.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists