| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20110516153900.GA31255@ericsson.com>
Date: Mon, 16 May 2011 08:39:00 -0700
From: Guenter Roeck <guenter.roeck@...csson.com>
To: "fabien.marteau@...adeus.com" <fabien.marteau@...adeus.com>
CC: "khali@...ux-fr.org" <khali@...ux-fr.org>,
"lm-sensors@...sensors.org" <lm-sensors@...sensors.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] hwmon: Driver for as1531, Austria-Microsystem Analog
to Digital Converter.
On Mon, May 16, 2011 at 09:39:14AM -0400, fabien.marteau@...adeus.com wrote:
> From: Fabien Marteau <fabien.marteau@...adeus.com>
>
>
Some description, such as "Dhis driver adds support for xxx" would be nice.
Also, I wonder if this driver belongs into hwmon in the first place. It is
a generic ADC chip with high conversion rate. iio would probably be more
appropriate and also much better in supporting high speed readings.
> Signed-off-by: Fabien Marteau <fabien.marteau@...adeus.com>
> ---
> drivers/hwmon/Kconfig | 10 ++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/as1531.c | 297 ++++++++++++++++++++++++++++++++++++++++++++++++
Documentation/hwmon/as1531 is missing.
Do you plan to add yourself into MAINTAINERS ?
> 3 files changed, 308 insertions(+), 0 deletions(-)
> create mode 100644 drivers/hwmon/as1531.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 50e40db..d2ba655 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -104,6 +104,16 @@ config SENSORS_ADCXX
> This driver can also be built as a module. If so, the module
> will be called adcxx.
>
> +config SENSORS_AS1531
> + tristate "Austria Microsystems AS1531 Analog to Digital Converter"
> + depends on SPI_MASTER
> + help
> + If you say yes here you get support for Austria Microsystems AS1531.
> + AS1531 is a 12Â bits Analog to digitals converter with 8 channels
> + provided by Austria-Microsystems company.
> + This driver can also be built as a module. If so, the module
> + will be called as1531.
> +
Should be inserted in alphabetical order. Should depend on EXPERIMENTAL.
> config SENSORS_ADM1021
> tristate "Analog Devices ADM1021 and compatibles"
> depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 967d0ea..8a304b3 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
> obj-$(CONFIG_SENSORS_AD7414) += ad7414.o
> obj-$(CONFIG_SENSORS_AD7418) += ad7418.o
> obj-$(CONFIG_SENSORS_ADCXX) += adcxx.o
> +obj-$(CONFIG_SENSORS_AS1531) += as1531.o
Insert in alphabetical order.
> obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
> obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o
> obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
> diff --git a/drivers/hwmon/as1531.c b/drivers/hwmon/as1531.c
> new file mode 100644
> index 0000000..3384663
> --- /dev/null
> +++ b/drivers/hwmon/as1531.c
> @@ -0,0 +1,297 @@
> +/*
> + * as1531.c
> + *
> + * Driver for Austria-Microsystem Analog to Digital Converter.
> + *
> + * Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@...adeus.com>
> + * Driver based on Marc Pignat <marc.pignat@...s.ch> adcxx.c driver.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/sysfs.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/mutex.h>
> +#include <linux/spi/spi.h>
> +
> +#define AS1531_SPI_SPEED 64941
> +#define AS1531_MAX_VALUE 2500
> +
> +#define AS1531_START_BIT (0x80)
> +#define AS1531_CHAN0 (0<<4)
> +#define AS1531_CHAN1 (4<<4)
> +#define AS1531_CHAN2 (1<<4)
> +#define AS1531_CHAN3 (5<<4)
> +#define AS1531_CHAN4 (2<<4)
> +#define AS1531_CHAN5 (6<<4)
> +#define AS1531_CHAN6 (3<<4)
> +#define AS1531_CHAN7 (7<<4)
> +
> +#define AS1531_RANGE_0_TO_VREF (1<<3)
> +#define AS1531_RANGE_HALFVREF_TO_HALFVREF (0<<3)
> +
> +#define AS1531_MODE_COM (1<<2)
> +#define AS1531_MODE_DIFF (0<<2)
> +
> +#define AS1531_POWER_DOWN 0x0
> +#define AS1531_POWER_REDUCED 0x1
> +#define AS1531_POWER_REDUCED_BIS 0x2
> +#define AS1531_POWER_NORMAL 0x3
> +
> +struct as1531 {
> + struct device *hwmon_dev;
> + struct mutex lock;
> +};
> +
> +static int as1531_message(struct spi_device *spi, int cmd, int *ret_value)
> +{
> + struct spi_message message;
> + struct spi_transfer x[1];
> + int status, i;
> + u8 cmd_send;
> + unsigned char buf[64];
> + unsigned char buf_read[64];
> +
Not that it matters much, but the buffer sizes seem to be a bit on the large side.
> + cmd_send = cmd;
> +
> + spi_message_init(&message);
> + memset(x, 0, sizeof x);
> + memset(buf, 0, sizeof(buf));
> + memset(buf_read, 0, sizeof(buf_read));
> +
Are those memsets really needed ?
> + for (i = 0; i < 8; i++) {
> + buf[i] = ((cmd_send & 0x80)>>7);
Missing spaces. Wonder why checkpatch doesn't complain about this anymore.
> + cmd_send = cmd_send << 1;
> + }
> +
> + x[0].tx_buf = buf;
> + x[0].len = 24;
> + x[0].rx_buf = buf_read;
> + x[0].speed_hz = AS1531_SPI_SPEED;
> + x[0].bits_per_word = 1;
> + spi_message_add_tail(&x[0], &message);
> +
> + status = spi_sync(spi, &message);
> + if (status < 0)
> + return status;
> +
> + *ret_value = buf_read[11] & 0x01;
> + for (i = 12; i < 23 ; i++) {
> + *ret_value = *ret_value << 1;
> + *ret_value = *ret_value | (buf_read[i]&0x01);
More missing spaces.
> + }
> +
> + return 0;
> +}
> +
> +static ssize_t as1531_read(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + struct as1531 *adc = dev_get_drvdata(&spi->dev);
> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
> + int status = 0;
> + int ret_value;
> + int32_t cmd;
> +
> +
Extra blank line.
> + if (mutex_lock_interruptible(&adc->lock))
> + return -ERESTARTSYS;
> +
> + switch (attr->index) {
> + case 0:
> + cmd = AS1531_START_BIT | AS1531_CHAN0 |
> + AS1531_RANGE_0_TO_VREF | AS1531_MODE_COM |
> + AS1531_POWER_NORMAL;
> + break;
> + case 1:
> + cmd = AS1531_START_BIT | AS1531_CHAN1 |
> + AS1531_RANGE_0_TO_VREF | AS1531_MODE_COM |
> + AS1531_POWER_NORMAL;
> + break;
> + case 2:
> + cmd = AS1531_START_BIT | AS1531_CHAN2 |
> + AS1531_RANGE_0_TO_VREF | AS1531_MODE_COM |
> + AS1531_POWER_NORMAL;
> + break;
> + case 3:
> + cmd = AS1531_START_BIT | AS1531_CHAN3 |
> + AS1531_RANGE_0_TO_VREF | AS1531_MODE_COM |
> + AS1531_POWER_NORMAL;
> + break;
> + case 4:
> + cmd = AS1531_START_BIT | AS1531_CHAN4 |
> + AS1531_RANGE_0_TO_VREF | AS1531_MODE_COM |
> + AS1531_POWER_NORMAL;
> + break;
> + case 5:
> + cmd = AS1531_START_BIT | AS1531_CHAN5 |
> + AS1531_RANGE_0_TO_VREF | AS1531_MODE_COM |
> + AS1531_POWER_NORMAL;
> + break;
> + case 6:
> + cmd = AS1531_START_BIT | AS1531_CHAN6 |
> + AS1531_RANGE_0_TO_VREF | AS1531_MODE_COM |
> + AS1531_POWER_NORMAL;
> + break;
> + case 7:
> + cmd = AS1531_START_BIT | AS1531_CHAN7 |
> + AS1531_RANGE_0_TO_VREF | AS1531_MODE_COM |
> + AS1531_POWER_NORMAL;
> + break;
> + default:
> + status = -EINVAL;
> + goto out;
> + }
The lock is really only needed here.
> + status = as1531_message(spi, cmd, &ret_value);
> + if (status < 0)
> + goto out;
> +
> + status = sprintf(buf, "%d\n", ret_value*2500/4096);
Missing spaces. The conversion seems to be arbitrary. You might want to return the raw value
and convert via sensors.conf.
> +out:
> + mutex_unlock(&adc->lock);
> + return status;
> +}
> +
> +
> +static ssize_t as1531_show_min(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + return sprintf(buf, "0\n");
> +}
> +
> +static ssize_t as1531_show_max(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + return sprintf(buf, "%d\n", AS1531_MAX_VALUE);
> +}
> +
Not sure if reporting constants makes much sense. Opinions, anyone ?
Besides, AS1531_MAX_VALUE is as arbitrary as the conversion function above.
> +static ssize_t as1531_show_name(struct device *dev, struct device_attribute
> + *devattr, char *buf)
> +{
> + return sprintf(buf, "as1531\n");
> +}
> +
> +static struct sensor_device_attribute as1531_input[] = {
> + SENSOR_ATTR(name, S_IRUGO, as1531_show_name, NULL, 0),
> + SENSOR_ATTR(in_min, S_IRUGO, as1531_show_min, NULL, 0),
> + SENSOR_ATTR(in_max, S_IRUGO, as1531_show_max, NULL, 0),
Non-standard attributes. Even if there is only one set of values reported per chip,
reporting it as non-standard attribute doesn't provide much value. Please define
per-sensor attributes.
> + SENSOR_ATTR(in0_input, S_IRUGO, as1531_read, NULL, 0),
> + SENSOR_ATTR(in1_input, S_IRUGO, as1531_read, NULL, 1),
> + SENSOR_ATTR(in2_input, S_IRUGO, as1531_read, NULL, 2),
> + SENSOR_ATTR(in3_input, S_IRUGO, as1531_read, NULL, 3),
> + SENSOR_ATTR(in4_input, S_IRUGO, as1531_read, NULL, 4),
> + SENSOR_ATTR(in5_input, S_IRUGO, as1531_read, NULL, 5),
> + SENSOR_ATTR(in6_input, S_IRUGO, as1531_read, NULL, 6),
> + SENSOR_ATTR(in7_input, S_IRUGO, as1531_read, NULL, 7),
> +};
> +
> +/*----------------------------------------------------------------------*/
> +
> +static int __devinit as1531_probe(struct spi_device *spi)
> +{
> + struct as1531 *adc;
> + int status;
> + int i;
> +
> + adc = kzalloc(sizeof(struct as1531), GFP_KERNEL);
> + if (adc == NULL)
> + return -ENOMEM;
> +
> + mutex_init(&adc->lock);
> + mutex_lock(&adc->lock);
Is that lock here really needed ? Should not be necessary.
> +
> + dev_set_drvdata(&spi->dev, adc);
> +
> + for (i = 0; i < 11; i++) {
> + status = device_create_file(&spi->dev,
> + &as1531_input[i].dev_attr);
> + if (status < 0) {
> + dev_err(&spi->dev, "device_create_file failed.\n");
> + goto out_err;
> + }
> + }
> +
> + adc->hwmon_dev = hwmon_device_register(&spi->dev);
> + if (IS_ERR(adc->hwmon_dev)) {
> + dev_err(&spi->dev, "hwmon_device_register failed.\n");
> + status = PTR_ERR(adc->hwmon_dev);
> + goto out_err;
> + }
> +
> + mutex_unlock(&adc->lock);
> + return 0;
> +
> +out_err:
> + for (i--; i >= 0; i--)
> + device_remove_file(&spi->dev, &as1531_input[i].dev_attr);
> + dev_set_drvdata(&spi->dev, NULL);
> + mutex_unlock(&adc->lock);
> + kfree(adc);
> + return status;
> +}
> +
> +static int __devexit as1531_remove(struct spi_device *spi)
> +{
> + struct as1531 *adc = dev_get_drvdata(&spi->dev);
> + int i;
> +
> + mutex_lock(&adc->lock);
Lock should not be needed here. If anything, it provides a false sense
of security: Anything else waiting on it will be surprised to notice that
the mutex (and memory) it is waiting on has been freed.
In other words, if this lock is really needed, you are in big trouble.
> + hwmon_device_unregister(adc->hwmon_dev);
> + for (i = 0; i < 8; i++)
> + device_remove_file(&spi->dev, &as1531_input[i].dev_attr);
> +
> + dev_set_drvdata(&spi->dev, NULL);
> + mutex_unlock(&adc->lock);
> + kfree(adc);
> +
> + return 0;
> +}
> +
> +/* SPI structures */
> +
> +static struct spi_driver as1531_driver = {
> + .driver = {
> + .name = "as1531",
> + .owner = THIS_MODULE,
> + },
> + .probe = as1531_probe,
> + .remove = __devexit_p(as1531_remove),
> +};
> +
> +/* Init module */
> +
> +static int __init init_as1531(void)
> +{
> + return spi_register_driver(&as1531_driver);
> +}
> +
> +static void __exit exit_as1531(void)
> +{
> + spi_unregister_driver(&as1531_driver);
> +}
> +
> +module_init(init_as1531);
> +module_exit(exit_as1531);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Fabien Marteau <fabien.marteau@...adeus.com>");
> +MODULE_DESCRIPTION("Driver for AS1531 ADC");
> --
> 1.7.0.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists