Message-ID: <20110516214608.17011.3075.stgit@ponder>
Date:	Mon, 16 May 2011 15:46:08 -0600
From:	Grant Likely <grant.likely@...retlab.ca>
To:	simon@...gewell.org, Dmitry Torokhov <dmitry.torokhov@...il.com>,
	linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
	OliverNeukumoliver@...kum.org
Subject: [PATCH] input: Add Nintendo extension controller driver

This driver adds support for Nintendo Wiimote extension controllers
directly attached to an i2c bus, such as when using an adaptor like
the Wiichuck.

Signed-off-by: Grant Likely <grant.likely@...retlab.ca>
---
 drivers/input/joystick/Kconfig    |   13 +
 drivers/input/joystick/Makefile   |    1 
 drivers/input/joystick/wiichuck.c |  441 +++++++++++++++++++++++++++++++++++++
 3 files changed, 455 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/joystick/wiichuck.c

diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 56eb471..5b7fba7 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -193,6 +193,19 @@ config JOYSTICK_TWIDJOY
 	  To compile this driver as a module, choose M here: the
 	  module will be called twidjoy.
 
+config JOYSTICK_WIICHUCK
+	tristate "Nintendo Wiimote Extension connector on i2c bus"
+	depends on I2C
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you have a Nintendo Wiimote extension connector
+	  attached directly to an i2c bus, like the Sparcfun Wiichuck adapter
+	  board.  This driver supports both the Nunchuck and the Classic
+	  Controller extensions.
+
+	  To compile this driver as a module, choose M here: the
+	  modules will be called wiichuck.
+
 config JOYSTICK_ZHENHUA
 	tristate "5-byte Zhenhua RC transmitter"
 	select SERIO
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 92dc0de..78466d6 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_JOYSTICK_TMDC)		+= tmdc.o
 obj-$(CONFIG_JOYSTICK_TURBOGRAFX)	+= turbografx.o
 obj-$(CONFIG_JOYSTICK_TWIDJOY)		+= twidjoy.o
 obj-$(CONFIG_JOYSTICK_WARRIOR)		+= warrior.o
+obj-$(CONFIG_JOYSTICK_WIICHUCK)		+= wiichuck.o
 obj-$(CONFIG_JOYSTICK_XPAD)		+= xpad.o
 obj-$(CONFIG_JOYSTICK_ZHENHUA)		+= zhenhua.o
 obj-$(CONFIG_JOYSTICK_WALKERA0701)	+= walkera0701.o
diff --git a/drivers/input/joystick/wiichuck.c b/drivers/input/joystick/wiichuck.c
new file mode 100644
index 0000000..85a194f
--- /dev/null
+++ b/drivers/input/joystick/wiichuck.c
@@ -0,0 +1,441 @@
+/*
+ * i2c Wiichuck driver (Nintendo Wiimote accessory connector)
+ *
+ * This driver supports Nintendo Wiimote accessories like the Nunchuck and
+ * the Classic Controller connected to an i2c bus.
+ *
+ * Copyright (c) 2011 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This driver uses the polled input device abstraction to implement an
+ * input driver for Nintendo expansion devices wired up to an i2c bus.
+ *
+ * A state machine implements the protocol handling.  It starts in the
+ * DISCONNECTED state initially and polls every second waiting for a
+ * device to get attached, and reading the device id when one does.
+ * If the device is recognized, then the polling period is bumped up
+ * to 50ms, and the state machine enters into a loop alternating
+ * between writing the data address (which triggers data capture) and
+ * reading the data block out of the device.  If at any time the
+ * device is disconnected, then it goes back to DISCONNECTED state and
+ * drops the polling frequency back down to 1 second.
+ *
+ * A callback is implemented for each supported devices, currently the
+ * Nunchuck and the Classic Controller.  Wii Motion Plus has yet to be
+ * added.
+ */
+
+#include <linux/cache.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+
+MODULE_AUTHOR("Grant Likely <grant.likely@...retlab.ca>");
+MODULE_DESCRIPTION("Wiichuck (i2c Nintendo Wiimote accessory) driver");
+MODULE_LICENSE("GPL");
+
+#define WIICHUCK_POLL_PERIOD	(1000)	/* 1 second */
+#ifdef DEBUG
+#define WIICHUCK_CAPTURE_PERIOD (500)	/* 1/2 second for debug */
+#else
+#define WIICHUCK_CAPTURE_PERIOD (100)	/* 100 milliseconds */
+#endif /* DEBUG */
+
+enum wiichuck_state {
+	WIICHUCK_STATE_DISCONNECTED = 0,
+	WIICHUCK_STATE_DATA,
+};
+
+struct wiichuck_device {
+	struct input_polled_dev *poll_dev;
+	struct i2c_client *i2c_client;
+	int (*process)(struct wiichuck_device *wiichuck);
+	enum wiichuck_state state;
+
+	/*
+	 * DMA buffer, with padding to give it its own cache line so that
+	 * the DMA streaming works on non-coherent architectures.
+	 * Question: Is this the proper pattern, and is this really necessary?
+	 */
+	uint8_t pad1[L1_CACHE_BYTES];
+	uint8_t buf[6];
+	uint8_t pad2[L1_CACHE_BYTES];
+};
+
+static int wiichuck_transfer(struct wiichuck_device *wiichuck,
+			     int len, bool read)
+{
+	struct i2c_client *i2c = wiichuck->i2c_client;
+	struct i2c_msg msg = {
+		.addr = i2c->addr, .len = len, .buf = wiichuck->buf };
+
+	if (read)
+		msg.flags = I2C_M_RD;
+	return i2c_transfer(i2c->adapter, &msg, 1);
+}
+
+static int wiichuck_write(struct wiichuck_device *wiichuck,
+			   uint8_t addr, uint8_t val)
+{
+	wiichuck->buf[0] = addr;
+	wiichuck->buf[1] = val;
+	return wiichuck_transfer(wiichuck, 2, false);
+}
+
+static inline int wiichuck_setaddr(struct wiichuck_device *wiichuck,
+				    uint8_t addr)
+{
+	wiichuck->buf[0] = addr;
+	return wiichuck_transfer(wiichuck, 1, false);
+}
+
+static inline int wiichuck_read(struct wiichuck_device *wiichuck, int len)
+{
+	return wiichuck_transfer(wiichuck, len, true);
+}
+
+static inline bool WIIBTN(int val, int bit)
+{
+	return (val & BIT(bit)) == 0;
+}
+
+static int wiichuck_process_unknown(struct wiichuck_device *wiichuck)
+{
+	return 0;
+}
+
+static int wiichuck_process_nunchuck(struct wiichuck_device *wiichuck)
+{
+	struct input_dev *input_dev = wiichuck->poll_dev->input;
+	uint8_t *b = wiichuck->buf;
+	int ax, ay, az, rc;
+
+	rc = wiichuck_read(wiichuck, 6);
+	if (rc < 0)
+		return rc;
+
+	ax = (b[2] << 2) | ((b[5] >> 2) & 0x3);
+	ay = (b[3] << 2) | ((b[5] >> 4) & 0x3);
+	az = (b[4] << 2) | ((b[5] >> 6) & 0x3);
+
+	input_report_abs(input_dev, ABS_X, b[0]);
+	input_report_abs(input_dev, ABS_Y, b[1]);
+	input_report_abs(input_dev, ABS_RX, ax);
+	input_report_abs(input_dev, ABS_RY, ax);
+	input_report_abs(input_dev, ABS_RZ, ay);
+	input_report_key(input_dev, BTN_C, WIIBTN(b[5], 1));
+	input_report_key(input_dev, BTN_Z, WIIBTN(b[5], 0));
+	input_sync(input_dev);
+
+	dev_dbg(&wiichuck->i2c_client->dev,
+		"nunchuck: j=%.3i,%.3i a=%.3x,%.3x,%.3x c,z=%i,%i\n",
+		b[0],b[1], ax,ay,az, WIIBTN(b[5], 1), WIIBTN(b[5], 0));
+	return 0;
+};
+
+static int wiichuck_process_classic(struct wiichuck_device *wiichuck)
+{
+	struct input_dev *input_dev = wiichuck->poll_dev->input;
+	uint8_t *b = wiichuck->buf;
+	int lx, ly, lt, rx, ry, rt, rc;
+
+	rc = wiichuck_read(wiichuck, 6);
+	if (rc < 0)
+		return rc;
+
+	/* Analog measurements; some values are split between registers */
+	rx = ((b[0] >> 3) & 0x18) | ((b[1] >> 5) & 6) | ((b[2] >> 7) & 1);
+	ry = b[2] & 0x1f;
+	rt = b[3] & 0x1f;
+	lx = b[0] & 0x3f;
+	ly = b[1] & 0x3f;
+	lt = ((b[2] >> 2) & 0x18) | ((b[3] >> 5) & 7);
+
+	input_report_abs(input_dev, ABS_HAT0X, lx); /* left joystick */
+	input_report_abs(input_dev, ABS_HAT0Y, ly);
+	input_report_abs(input_dev, ABS_BRAKE, lt); /* left trigger */
+	input_report_abs(input_dev, ABS_HAT1X, rx); /* right joystick */
+	input_report_abs(input_dev, ABS_HAT1Y, ry);
+	input_report_abs(input_dev, ABS_GAS, rt); /* right trigger */
+
+	/* D-pad */
+	input_report_abs(input_dev, ABS_HAT2X, WIIBTN(b[4],7) - WIIBTN(b[5],1));
+	input_report_abs(input_dev, ABS_HAT2Y, WIIBTN(b[4],6) - WIIBTN(b[5],0));
+
+	/* Buttons */
+	input_report_key(input_dev, BTN_TL, WIIBTN(b[4], 5)); /* left trigger */
+	input_report_key(input_dev, BTN_SELECT, WIIBTN(b[4], 4)); /* minus */
+	input_report_key(input_dev, BTN_MODE, WIIBTN(b[4], 3)); /* home */
+	input_report_key(input_dev, BTN_START, WIIBTN(b[4], 2)); /* plus */
+	input_report_key(input_dev, BTN_TR, WIIBTN(b[4], 1)); /* right trigger */
+
+	input_report_key(input_dev, BTN_TL2, WIIBTN(b[5], 7)); /* left z */
+	input_report_key(input_dev, BTN_B, WIIBTN(b[5], 6));
+	input_report_key(input_dev, BTN_Y, WIIBTN(b[5], 5));
+	input_report_key(input_dev, BTN_A, WIIBTN(b[5], 4));
+	input_report_key(input_dev, BTN_X, WIIBTN(b[5], 3));
+	input_report_key(input_dev, BTN_TR2, WIIBTN(b[5], 2)); /* right z */
+	input_sync(input_dev);
+
+	dev_dbg(&wiichuck->i2c_client->dev,
+		"classic: r=%.3i,%.3i,%.3i l=%.3x,%.3x,%.3x b=%.2x,%.2x\n",
+		lx,ly,lt, rx,ry,rt, b[4],b[5]);
+	return 0;
+};
+
+/**
+ * wiichuck_poll() - Protocol state machine implementation
+ *
+ * A state machine is used here to keep the protocol processing
+ * reentrant.  Any of the i2c transactions will indeed sleep because
+ * i2c transactions are slow, but there is a mandatory delay between
+ * triggering the data capture (set address) and reading the data
+ * back.  Using a state machine means the poll function can return and
+ * free up the worker thread while waiting for the data.
+ */
+static void wiichuck_poll(struct input_polled_dev *poll_dev)
+{
+	struct wiichuck_device *wiichuck = poll_dev->private;
+	int id;
+
+	switch (wiichuck->state) {
+	case WIICHUCK_STATE_DISCONNECTED:
+		/* Disable encryption */
+		if (wiichuck_write(wiichuck, 0xf0, 0x55) < 0)
+			return;
+		if (wiichuck_write(wiichuck, 0xfb, 0x00) < 0)
+			return;
+
+		/* Read device id */
+		if (wiichuck_setaddr(wiichuck, 0xfe) < 0)
+			return;
+		if (wiichuck_read(wiichuck, 2) < 0)
+			return;
+		id = (wiichuck->buf[0] << 8) | wiichuck->buf[1];
+
+		switch (id) {
+			case 0x0000: /* Nunchuck */
+				wiichuck->process = wiichuck_process_nunchuck;
+				dev_info(&wiichuck->i2c_client->dev,
+					 "Connected Nunchuck\n");
+				break;
+
+			case 0x0101: /* Classic Controller */
+				wiichuck->process = wiichuck_process_classic;
+				dev_info(&wiichuck->i2c_client->dev,
+					 "Connected Classic Controller\n");
+
+			default: /* No connection or unsupported device */
+				wiichuck->process = wiichuck_process_unknown;
+				dev_dbg(&wiichuck->i2c_client->dev,
+					 "Connected unknown id: %x\n", id);
+				return;
+		}
+
+		/* Setup the first data transfer */
+		if (wiichuck_setaddr(wiichuck, 0) < 0)
+			return;
+
+		wiichuck->state = WIICHUCK_STATE_DATA;
+		poll_dev->poll_interval = WIICHUCK_CAPTURE_PERIOD;
+		break;
+
+	case WIICHUCK_STATE_DATA:
+		/* Read the input report */
+		if (wiichuck->process(wiichuck) < 0)
+			goto disconnect;
+
+		/* Setup the next transfer */
+		if (wiichuck_setaddr(wiichuck, 0) < 0)
+			goto disconnect;
+		break;
+
+	default:
+		goto disconnect;
+	}
+	return;
+
+ disconnect:
+	dev_info(&wiichuck->i2c_client->dev, "disconnected\n");
+	wiichuck->state = WIICHUCK_STATE_DISCONNECTED;
+	poll_dev->poll_interval = WIICHUCK_POLL_PERIOD;
+}
+
+/**
+ * wiichuck_open() - Set up initial state machine state
+ *
+ * Called exactly once the first time the device is opened by
+ * userspace.  Will not be called again unless all users close it
+ * before reopening.  This simply clears the state to disconnected and
+ * sets the poll rate back to the slow speed
+ */
+static void wiichuck_open(struct input_polled_dev *poll_dev)
+{
+	struct wiichuck_device *wiichuck = poll_dev->private;
+
+	wiichuck->process = wiichuck_process_unknown;
+	wiichuck->state = WIICHUCK_STATE_DISCONNECTED;
+	wiichuck->poll_dev->poll_interval = WIICHUCK_POLL_PERIOD;
+}
+
+static int __devinit wiichuck_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct wiichuck_device *wiichuck;
+	struct input_polled_dev *poll_dev;
+	struct input_dev *input_dev;
+	int rc;
+
+	wiichuck = kzalloc(sizeof(*wiichuck), GFP_KERNEL);
+	if (!wiichuck)
+		return -ENOMEM;
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		rc = -ENOMEM;
+		goto err_alloc;
+	}
+
+	wiichuck->i2c_client = client;
+	wiichuck->poll_dev = poll_dev;
+
+	poll_dev->private = wiichuck;
+	poll_dev->poll = wiichuck_poll;
+	poll_dev->open = wiichuck_open;
+
+	input_dev = poll_dev->input;
+	input_dev->name = "Wiichuck expansion connector";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	/* Declare the events generated by this driver */
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	/* Nunchuck ranges */
+	__set_bit(ABS_X, input_dev->absbit); /* joystick */
+	__set_bit(ABS_Y, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_X, 30, 220, 4, 8);
+	input_set_abs_params(input_dev, ABS_Y, 40, 200, 4, 8);
+
+	__set_bit(ABS_RX, input_dev->absbit); /* accelerometer */
+	__set_bit(ABS_RY, input_dev->absbit);
+	__set_bit(ABS_RZ, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_RX, 0, 0x3ff, 4, 8);
+	input_set_abs_params(input_dev, ABS_RY, 0, 0x3ff, 4, 8);
+	input_set_abs_params(input_dev, ABS_RZ, 0, 0x3ff, 4, 8);
+
+	/* Nunchuck buttons */
+	__set_bit(BTN_C, input_dev->keybit);
+	__set_bit(BTN_Z, input_dev->keybit);
+
+	/* Classic ranges */
+	__set_bit(ABS_HAT0X, input_dev->absbit); /* Left Joystick */
+	__set_bit(ABS_HAT0Y, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_HAT0X, 0, 63, 2, 4);
+	input_set_abs_params(input_dev, ABS_HAT0Y, 0, 63, 2, 4);
+
+	__set_bit(ABS_HAT1X, input_dev->absbit); /* Right Joystick */
+	__set_bit(ABS_HAT1Y, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_HAT1X, 0, 31, 1, 2);
+	input_set_abs_params(input_dev, ABS_HAT1Y, 0, 31, 1, 2);
+
+	__set_bit(ABS_HAT2X, input_dev->absbit); /* D-pad */
+	__set_bit(ABS_HAT2Y, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_HAT2X, -1, 1, 0, 0);
+	input_set_abs_params(input_dev, ABS_HAT2Y, -1, 1, 0, 0);
+
+	__set_bit(ABS_BRAKE, input_dev->absbit); /* Left trigger */
+	input_set_abs_params(input_dev, ABS_BRAKE, 0, 31, 1, 2);
+	__set_bit(ABS_GAS, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_GAS, 0, 31, 1, 2);
+
+	/* Classic buttons */
+	__set_bit(BTN_TL, input_dev->keybit);
+	__set_bit(BTN_SELECT, input_dev->keybit);
+	__set_bit(BTN_MODE, input_dev->keybit);
+	__set_bit(BTN_START, input_dev->keybit);
+	__set_bit(BTN_TR, input_dev->keybit);
+	__set_bit(BTN_TL2, input_dev->keybit);
+	__set_bit(BTN_B, input_dev->keybit);
+	__set_bit(BTN_Y, input_dev->keybit);
+	__set_bit(BTN_A, input_dev->keybit);
+	__set_bit(BTN_X, input_dev->keybit);
+	__set_bit(BTN_TR2, input_dev->keybit);
+
+	i2c_set_clientdata(client, wiichuck);
+
+	/* Register the device; it is 'live' after this point */
+	rc = input_register_polled_device(wiichuck->poll_dev);
+	if (rc) {
+		dev_err(&client->dev, "Failed to register input device\n");
+		goto err_register;
+	}
+
+	return 0;
+
+ err_register:
+	i2c_set_clientdata(client, NULL);
+	input_free_polled_device(poll_dev);
+ err_alloc:
+	kfree(wiichuck);
+
+	return rc;
+}
+
+static int __devexit wiichuck_remove(struct i2c_client *client)
+{
+	struct wiichuck_device *wiichuck = i2c_get_clientdata(client);
+
+	i2c_set_clientdata(client, NULL);
+	input_unregister_polled_device(wiichuck->poll_dev);
+	input_free_polled_device(wiichuck->poll_dev);
+	kfree(wiichuck);
+
+	return 0;
+}
+
+static const struct i2c_device_id wiichuck_id[] = {
+	{ "wiichuck", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wiichuck_id);
+
+#ifdef CONFIG_OF
+static struct of_device_id wiichuck_match_table[] __devinitdata = {
+	{ .compatible = "nintendo,wiimote-extension", },
+	{ }
+};
+#else
+#define wiichuck_match_table NULL
+#endif
+
+static struct i2c_driver wiichuck_driver = {
+	.driver = {
+		.name = "wiichuck",
+		.owner = THIS_MODULE,
+		.of_match_table = wiichuck_match_table,
+	},
+	.probe		= wiichuck_probe,
+	.remove		= __devexit_p(wiichuck_remove),
+	.id_table	= wiichuck_id,
+};
+
+static int __init wiichuck_init(void)
+{
+	return i2c_add_driver(&wiichuck_driver);
+}
+module_init(wiichuck_init);
+
+static void __exit wiichuck_exit(void)
+{
+	i2c_del_driver(&wiichuck_driver);
+}
+module_exit(wiichuck_exit);

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists