| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 16 May 2011 23:39:31 -0700
From: "Nicholas A. Bellinger" <nab@...ux-iscsi.org>
To: linux-kernel <linux-kernel@...r.kernel.org>,
linux-scsi <linux-scsi@...r.kernel.org>,
James Bottomley <James.Bottomley@...senPartnership.com>
Cc: Christoph Hellwig <hch@....de>, Hannes Reinecke <hare@...e.de>,
FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>,
Andy Grover <agrover@...hat.com>,
Mike Christie <michaelc@...wisc.edu>,
Boaz Harrosh <bharrosh@...asas.com>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Martin Svec <martin.svec@...er.cz>,
Nicholas Bellinger <nab@...ux-iscsi.org>
Subject: [PATCH-v4 11/14] iscsi-target: Add iSCSI Error Recovery Hierarchy support
From: Nicholas Bellinger <nab@...ux-iscsi.org>
This patch adds support for RFC-3720 compatiable ErrorRecoveryLevel
support as defined in Section 6.1.5. Error Recovery Hierarchy.
This includes support for iSCSI session reinstatement, iSCSI within
command and within connection recovery, and explict/implict connection
recovery (CSM-E and CSM-I) from state machines in Section 7 of RFC-3720.
These functions are called from iscsi_target.c to handle processing
based on the negotiated session-wide ErrorRecoveryLevel parameter.
Signed-off-by: Nicholas A. Bellinger <nab@...ux-iscsi.org>
---
drivers/target/iscsi/iscsi_target_erl0.c | 1005 +++++++++++++++++++++++
drivers/target/iscsi/iscsi_target_erl0.h | 15 +
drivers/target/iscsi/iscsi_target_erl1.c | 1306 ++++++++++++++++++++++++++++++
drivers/target/iscsi/iscsi_target_erl1.h | 26 +
drivers/target/iscsi/iscsi_target_erl2.c | 483 +++++++++++
drivers/target/iscsi/iscsi_target_erl2.h | 18 +
6 files changed, 2853 insertions(+), 0 deletions(-)
create mode 100644 drivers/target/iscsi/iscsi_target_erl0.c
create mode 100644 drivers/target/iscsi/iscsi_target_erl0.h
create mode 100644 drivers/target/iscsi/iscsi_target_erl1.c
create mode 100644 drivers/target/iscsi/iscsi_target_erl1.h
create mode 100644 drivers/target/iscsi/iscsi_target_erl2.c
create mode 100644 drivers/target/iscsi/iscsi_target_erl2.h
diff --git a/drivers/target/iscsi/iscsi_target_erl0.c b/drivers/target/iscsi/iscsi_target_erl0.c
new file mode 100644
index 0000000..c18dad5
--- /dev/null
+++ b/drivers/target/iscsi/iscsi_target_erl0.c
@@ -0,0 +1,1005 @@
+/******************************************************************************
+ * This file contains error recovery level zero functions used by
+ * the iSCSI Target driver.
+ *
+ * © Copyright 2007-2011 RisingTide Systems LLC.
+ *
+ * Licensed to the Linux Foundation under the General Public License (GPL) version 2.
+ *
+ * Author: Nicholas A. Bellinger <nab@...ux-iscsi.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ ******************************************************************************/
+
+#include <scsi/iscsi_proto.h>
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+
+#include "iscsi_target_debug.h"
+#include "iscsi_target_core.h"
+#include "iscsi_target_seq_pdu_list.h"
+#include "iscsi_target_tq.h"
+#include "iscsi_target_erl0.h"
+#include "iscsi_target_erl1.h"
+#include "iscsi_target_erl2.h"
+#include "iscsi_target_util.h"
+#include "iscsi_target.h"
+
+/*
+ * Used to set values in struct iscsi_cmd that iscsit_dataout_check_sequence()
+ * checks against to determine a PDU's Offset+Length is within the current
+ * DataOUT Sequence. Used for DataSequenceInOrder=Yes only.
+ */
+void iscsit_set_dataout_sequence_values(
+ struct iscsi_cmd *cmd)
+{
+ struct iscsi_conn *conn = cmd->conn;
+ /*
+ * Still set seq_start_offset and seq_end_offset for Unsolicited
+ * DataOUT, even if DataSequenceInOrder=No.
+ */
+ if (cmd->unsolicited_data) {
+ cmd->seq_start_offset = cmd->write_data_done;
+ cmd->seq_end_offset = (cmd->write_data_done +
+ (cmd->data_length >
+ conn->sess->sess_ops->FirstBurstLength) ?
+ conn->sess->sess_ops->FirstBurstLength : cmd->data_length);
+ return;
+ }
+
+ if (!conn->sess->sess_ops->DataSequenceInOrder)
+ return;
+
+ if (!cmd->seq_start_offset && !cmd->seq_end_offset) {
+ cmd->seq_start_offset = cmd->write_data_done;
+ cmd->seq_end_offset = (cmd->data_length >
+ conn->sess->sess_ops->MaxBurstLength) ?
+ (cmd->write_data_done +
+ conn->sess->sess_ops->MaxBurstLength) : cmd->data_length;
+ } else {
+ cmd->seq_start_offset = cmd->seq_end_offset;
+ cmd->seq_end_offset = ((cmd->seq_end_offset +
+ conn->sess->sess_ops->MaxBurstLength) >=
+ cmd->data_length) ? cmd->data_length :
+ (cmd->seq_end_offset +
+ conn->sess->sess_ops->MaxBurstLength);
+ }
+}
+
+static int iscsit_dataout_within_command_recovery_check(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf)
+{
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_data *hdr = (struct iscsi_data *) buf;
+ u32 payload_length = ntoh24(hdr->dlength);
+
+ /*
+ * We do the within-command recovery checks here as it is
+ * the first function called in iscsi_check_pre_dataout().
+ * Basically, if we are in within-command recovery and
+ * the PDU does not contain the offset the sequence needs,
+ * dump the payload.
+ *
+ * This only applies to DataPDUInOrder=Yes, for
+ * DataPDUInOrder=No we only re-request the failed PDU
+ * and check that all PDUs in a sequence are received
+ * upon end of sequence.
+ */
+ if (conn->sess->sess_ops->DataSequenceInOrder) {
+ if ((cmd->cmd_flags & ICF_WITHIN_COMMAND_RECOVERY) &&
+ (cmd->write_data_done != hdr->offset))
+ goto dump;
+
+ cmd->cmd_flags &= ~ICF_WITHIN_COMMAND_RECOVERY;
+ } else {
+ struct iscsi_seq *seq;
+
+ seq = iscsit_get_seq_holder(cmd, hdr->offset, payload_length);
+ if (!seq)
+ return DATAOUT_CANNOT_RECOVER;
+ /*
+ * Set the struct iscsi_seq pointer to reuse later.
+ */
+ cmd->seq_ptr = seq;
+
+ if (conn->sess->sess_ops->DataPDUInOrder) {
+ if ((seq->status ==
+ DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY) &&
+ ((seq->offset != hdr->offset) ||
+ (seq->data_sn != hdr->datasn)))
+ goto dump;
+ } else {
+ if ((seq->status ==
+ DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY) &&
+ (seq->data_sn != hdr->datasn))
+ goto dump;
+ }
+
+ if (seq->status == DATAOUT_SEQUENCE_COMPLETE)
+ goto dump;
+
+ if (seq->status != DATAOUT_SEQUENCE_COMPLETE)
+ seq->status = 0;
+ }
+
+ return DATAOUT_NORMAL;
+
+dump:
+ printk(KERN_ERR "Dumping DataOUT PDU Offset: %u Length: %d DataSN:"
+ " 0x%08x\n", hdr->offset, payload_length, hdr->datasn);
+ return iscsit_dump_data_payload(conn, payload_length, 1);
+}
+
+static int iscsit_dataout_check_unsolicited_sequence(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf)
+{
+ u32 first_burst_len;
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_data *hdr = (struct iscsi_data *) buf;
+ u32 payload_length = ntoh24(hdr->dlength);
+
+
+ if ((hdr->offset < cmd->seq_start_offset) ||
+ ((hdr->offset + payload_length) > cmd->seq_end_offset)) {
+ printk(KERN_ERR "Command ITT: 0x%08x with Offset: %u,"
+ " Length: %u outside of Unsolicited Sequence %u:%u while"
+ " DataSequenceInOrder=Yes.\n", cmd->init_task_tag,
+ hdr->offset, payload_length, cmd->seq_start_offset,
+ cmd->seq_end_offset);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+
+ first_burst_len = (cmd->first_burst_len + payload_length);
+
+ if (first_burst_len > conn->sess->sess_ops->FirstBurstLength) {
+ printk(KERN_ERR "Total %u bytes exceeds FirstBurstLength: %u"
+ " for this Unsolicited DataOut Burst.\n",
+ first_burst_len, conn->sess->sess_ops->FirstBurstLength);
+ transport_send_check_condition_and_sense(SE_CMD(cmd),
+ TCM_INCORRECT_AMOUNT_OF_DATA, 0);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+
+ /*
+ * Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity
+ * checks for the current Unsolicited DataOUT Sequence.
+ */
+ if (hdr->flags & ISCSI_FLAG_CMD_FINAL) {
+ /*
+ * Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of
+ * sequence checks are handled in
+ * iscsit_dataout_datapduinorder_no_fbit().
+ */
+ if (!conn->sess->sess_ops->DataPDUInOrder)
+ goto out;
+
+ if ((first_burst_len != cmd->data_length) &&
+ (first_burst_len != conn->sess->sess_ops->FirstBurstLength)) {
+ printk(KERN_ERR "Unsolicited non-immediate data"
+ " received %u does not equal FirstBurstLength: %u, and"
+ " does not equal ExpXferLen %u.\n", first_burst_len,
+ conn->sess->sess_ops->FirstBurstLength,
+ cmd->data_length);
+ transport_send_check_condition_and_sense(SE_CMD(cmd),
+ TCM_INCORRECT_AMOUNT_OF_DATA, 0);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+ } else {
+ if (first_burst_len == conn->sess->sess_ops->FirstBurstLength) {
+ printk(KERN_ERR "Command ITT: 0x%08x reached"
+ " FirstBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol"
+ " error.\n", cmd->init_task_tag,
+ conn->sess->sess_ops->FirstBurstLength);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+ if (first_burst_len == cmd->data_length) {
+ printk(KERN_ERR "Command ITT: 0x%08x reached"
+ " ExpXferLen: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol"
+ " error.\n", cmd->init_task_tag, cmd->data_length);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+ }
+
+out:
+ return DATAOUT_NORMAL;
+}
+
+static int iscsit_dataout_check_sequence(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf)
+{
+ u32 next_burst_len;
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_seq *seq = NULL;
+ struct iscsi_data *hdr = (struct iscsi_data *) buf;
+ u32 payload_length = ntoh24(hdr->dlength);
+
+ /*
+ * For DataSequenceInOrder=Yes: Check that the offset and offset+length
+ * is within range as defined by iscsi_set_dataout_sequence_values().
+ *
+ * For DataSequenceInOrder=No: Check that an struct iscsi_seq exists for
+ * offset+length tuple.
+ */
+ if (conn->sess->sess_ops->DataSequenceInOrder) {
+ /*
+ * Due to possibility of recovery DataOUT sent by the initiator
+ * fullfilling an Recovery R2T, it's best to just dump the
+ * payload here, instead of erroring out.
+ */
+ if ((hdr->offset < cmd->seq_start_offset) ||
+ ((hdr->offset + payload_length) > cmd->seq_end_offset)) {
+ printk(KERN_ERR "Command ITT: 0x%08x with Offset: %u,"
+ " Length: %u outside of Sequence %u:%u while"
+ " DataSequenceInOrder=Yes.\n", cmd->init_task_tag,
+ hdr->offset, payload_length, cmd->seq_start_offset,
+ cmd->seq_end_offset);
+
+ if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
+ return DATAOUT_CANNOT_RECOVER;
+ return DATAOUT_WITHIN_COMMAND_RECOVERY;
+ }
+
+ next_burst_len = (cmd->next_burst_len + payload_length);
+ } else {
+ seq = iscsit_get_seq_holder(cmd, hdr->offset, payload_length);
+ if (!seq)
+ return DATAOUT_CANNOT_RECOVER;
+ /*
+ * Set the struct iscsi_seq pointer to reuse later.
+ */
+ cmd->seq_ptr = seq;
+
+ if (seq->status == DATAOUT_SEQUENCE_COMPLETE) {
+ if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
+ return DATAOUT_CANNOT_RECOVER;
+ return DATAOUT_WITHIN_COMMAND_RECOVERY;
+ }
+
+ next_burst_len = (seq->next_burst_len + payload_length);
+ }
+
+ if (next_burst_len > conn->sess->sess_ops->MaxBurstLength) {
+ printk(KERN_ERR "Command ITT: 0x%08x, NextBurstLength: %u and"
+ " Length: %u exceeds MaxBurstLength: %u. protocol"
+ " error.\n", cmd->init_task_tag,
+ (next_burst_len - payload_length),
+ payload_length, conn->sess->sess_ops->MaxBurstLength);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+
+ /*
+ * Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity
+ * checks for the current DataOUT Sequence.
+ */
+ if (hdr->flags & ISCSI_FLAG_CMD_FINAL) {
+ /*
+ * Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of
+ * sequence checks are handled in
+ * iscsit_dataout_datapduinorder_no_fbit().
+ */
+ if (!conn->sess->sess_ops->DataPDUInOrder)
+ goto out;
+
+ if (conn->sess->sess_ops->DataSequenceInOrder) {
+ if ((next_burst_len <
+ conn->sess->sess_ops->MaxBurstLength) &&
+ ((cmd->write_data_done + payload_length) <
+ cmd->data_length)) {
+ printk(KERN_ERR "Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"
+ " before end of DataOUT sequence, protocol"
+ " error.\n", cmd->init_task_tag);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+ } else {
+ if (next_burst_len < seq->xfer_len) {
+ printk(KERN_ERR "Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"
+ " before end of DataOUT sequence, protocol"
+ " error.\n", cmd->init_task_tag);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+ }
+ } else {
+ if (conn->sess->sess_ops->DataSequenceInOrder) {
+ if (next_burst_len ==
+ conn->sess->sess_ops->MaxBurstLength) {
+ printk(KERN_ERR "Command ITT: 0x%08x reached"
+ " MaxBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is"
+ " not set, protocol error.", cmd->init_task_tag,
+ conn->sess->sess_ops->MaxBurstLength);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+ if ((cmd->write_data_done + payload_length) ==
+ cmd->data_length) {
+ printk(KERN_ERR "Command ITT: 0x%08x reached"
+ " last DataOUT PDU in sequence but ISCSI_FLAG_"
+ "CMD_FINAL is not set, protocol error.\n",
+ cmd->init_task_tag);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+ } else {
+ if (next_burst_len == seq->xfer_len) {
+ printk(KERN_ERR "Command ITT: 0x%08x reached"
+ " last DataOUT PDU in sequence but ISCSI_FLAG_"
+ "CMD_FINAL is not set, protocol error.\n",
+ cmd->init_task_tag);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+ }
+ }
+
+out:
+ return DATAOUT_NORMAL;
+}
+
+static int iscsit_dataout_check_datasn(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf)
+{
+ int dump = 0, recovery = 0;
+ u32 data_sn = 0;
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_data *hdr = (struct iscsi_data *) buf;
+ u32 payload_length = ntoh24(hdr->dlength);
+
+ /*
+ * Considering the target has no method of re-requesting DataOUT
+ * by DataSN, if we receieve a greater DataSN than expected we
+ * assume the functions for DataPDUInOrder=[Yes,No] below will
+ * handle it.
+ *
+ * If the DataSN is less than expected, dump the payload.
+ */
+ if (conn->sess->sess_ops->DataSequenceInOrder)
+ data_sn = cmd->data_sn;
+ else {
+ struct iscsi_seq *seq = cmd->seq_ptr;
+ data_sn = seq->data_sn;
+ }
+
+ if (hdr->datasn > data_sn) {
+ printk(KERN_ERR "Command ITT: 0x%08x, received DataSN: 0x%08x"
+ " higher than expected 0x%08x.\n", cmd->init_task_tag,
+ hdr->datasn, data_sn);
+ recovery = 1;
+ goto recover;
+ } else if (hdr->datasn < data_sn) {
+ printk(KERN_ERR "Command ITT: 0x%08x, received DataSN: 0x%08x"
+ " lower than expected 0x%08x, discarding payload.\n",
+ cmd->init_task_tag, hdr->datasn, data_sn);
+ dump = 1;
+ goto dump;
+ }
+
+ return DATAOUT_NORMAL;
+
+recover:
+ if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
+ printk(KERN_ERR "Unable to perform within-command recovery"
+ " while ERL=0.\n");
+ return DATAOUT_CANNOT_RECOVER;
+ }
+dump:
+ if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
+ return DATAOUT_CANNOT_RECOVER;
+
+ return (recovery || dump) ? DATAOUT_WITHIN_COMMAND_RECOVERY :
+ DATAOUT_NORMAL;
+}
+
+static int iscsit_dataout_pre_datapduinorder_yes(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf)
+{
+ int dump = 0, recovery = 0;
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_data *hdr = (struct iscsi_data *) buf;
+ u32 payload_length = ntoh24(hdr->dlength);
+
+ /*
+ * For DataSequenceInOrder=Yes: If the offset is greater than the global
+ * DataPDUInOrder=Yes offset counter in struct iscsi_cmd a protcol error has
+ * occured and fail the connection.
+ *
+ * For DataSequenceInOrder=No: If the offset is greater than the per
+ * sequence DataPDUInOrder=Yes offset counter in struct iscsi_seq a protocol
+ * error has occured and fail the connection.
+ */
+ if (conn->sess->sess_ops->DataSequenceInOrder) {
+ if (hdr->offset != cmd->write_data_done) {
+ printk(KERN_ERR "Command ITT: 0x%08x, received offset"
+ " %u different than expected %u.\n", cmd->init_task_tag,
+ hdr->offset, cmd->write_data_done);
+ recovery = 1;
+ goto recover;
+ }
+ } else {
+ struct iscsi_seq *seq = cmd->seq_ptr;
+
+ if (hdr->offset > seq->offset) {
+ printk(KERN_ERR "Command ITT: 0x%08x, received offset"
+ " %u greater than expected %u.\n", cmd->init_task_tag,
+ hdr->offset, seq->offset);
+ recovery = 1;
+ goto recover;
+ } else if (hdr->offset < seq->offset) {
+ printk(KERN_ERR "Command ITT: 0x%08x, received offset"
+ " %u less than expected %u, discarding payload.\n",
+ cmd->init_task_tag, hdr->offset, seq->offset);
+ dump = 1;
+ goto dump;
+ }
+ }
+
+ return DATAOUT_NORMAL;
+
+recover:
+ if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
+ printk(KERN_ERR "Unable to perform within-command recovery"
+ " while ERL=0.\n");
+ return DATAOUT_CANNOT_RECOVER;
+ }
+dump:
+ if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
+ return DATAOUT_CANNOT_RECOVER;
+
+ return (recovery) ? iscsit_recover_dataout_sequence(cmd,
+ hdr->offset, payload_length) :
+ (dump) ? DATAOUT_WITHIN_COMMAND_RECOVERY : DATAOUT_NORMAL;
+}
+
+static int iscsit_dataout_pre_datapduinorder_no(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf)
+{
+ struct iscsi_pdu *pdu;
+ struct iscsi_data *hdr = (struct iscsi_data *) buf;
+ u32 payload_length = ntoh24(hdr->dlength);
+
+ pdu = iscsit_get_pdu_holder(cmd, hdr->offset, payload_length);
+ if (!pdu)
+ return DATAOUT_CANNOT_RECOVER;
+
+ cmd->pdu_ptr = pdu;
+
+ switch (pdu->status) {
+ case ISCSI_PDU_NOT_RECEIVED:
+ case ISCSI_PDU_CRC_FAILED:
+ case ISCSI_PDU_TIMED_OUT:
+ break;
+ case ISCSI_PDU_RECEIVED_OK:
+ printk(KERN_ERR "Command ITT: 0x%08x received already gotten"
+ " Offset: %u, Length: %u\n", cmd->init_task_tag,
+ hdr->offset, payload_length);
+ return iscsit_dump_data_payload(cmd->conn, payload_length, 1);
+ default:
+ return DATAOUT_CANNOT_RECOVER;
+ }
+
+ return DATAOUT_NORMAL;
+}
+
+static int iscsit_dataout_update_r2t(struct iscsi_cmd *cmd, u32 offset, u32 length)
+{
+ struct iscsi_r2t *r2t;
+
+ if (cmd->unsolicited_data)
+ return 0;
+
+ r2t = iscsit_get_r2t_for_eos(cmd, offset, length);
+ if (!r2t)
+ return -1;
+
+ spin_lock_bh(&cmd->r2t_lock);
+ r2t->seq_complete = 1;
+ cmd->outstanding_r2ts--;
+ spin_unlock_bh(&cmd->r2t_lock);
+
+ return 0;
+}
+
+static int iscsit_dataout_update_datapduinorder_no(
+ struct iscsi_cmd *cmd,
+ u32 data_sn,
+ int f_bit)
+{
+ int ret = 0;
+ struct iscsi_pdu *pdu = cmd->pdu_ptr;
+
+ pdu->data_sn = data_sn;
+
+ switch (pdu->status) {
+ case ISCSI_PDU_NOT_RECEIVED:
+ pdu->status = ISCSI_PDU_RECEIVED_OK;
+ break;
+ case ISCSI_PDU_CRC_FAILED:
+ pdu->status = ISCSI_PDU_RECEIVED_OK;
+ break;
+ case ISCSI_PDU_TIMED_OUT:
+ pdu->status = ISCSI_PDU_RECEIVED_OK;
+ break;
+ default:
+ return DATAOUT_CANNOT_RECOVER;
+ }
+
+ if (f_bit) {
+ ret = iscsit_dataout_datapduinorder_no_fbit(cmd, pdu);
+ if (ret == DATAOUT_CANNOT_RECOVER)
+ return ret;
+ }
+
+ return DATAOUT_NORMAL;
+}
+
+static int iscsit_dataout_post_crc_passed(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf)
+{
+ int ret, send_r2t = 0;
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_seq *seq = NULL;
+ struct iscsi_data *hdr = (struct iscsi_data *) buf;
+ u32 payload_length = ntoh24(hdr->dlength);
+
+ if (cmd->unsolicited_data) {
+ if ((cmd->first_burst_len + payload_length) ==
+ conn->sess->sess_ops->FirstBurstLength) {
+ if (iscsit_dataout_update_r2t(cmd, hdr->offset,
+ payload_length) < 0)
+ return DATAOUT_CANNOT_RECOVER;
+ send_r2t = 1;
+ }
+
+ if (!conn->sess->sess_ops->DataPDUInOrder) {
+ ret = iscsit_dataout_update_datapduinorder_no(cmd,
+ hdr->datasn, (hdr->flags & ISCSI_FLAG_CMD_FINAL));
+ if (ret == DATAOUT_CANNOT_RECOVER)
+ return ret;
+ }
+
+ cmd->first_burst_len += payload_length;
+
+ if (conn->sess->sess_ops->DataSequenceInOrder)
+ cmd->data_sn++;
+ else {
+ seq = cmd->seq_ptr;
+ seq->data_sn++;
+ seq->offset += payload_length;
+ }
+
+ if (send_r2t) {
+ if (seq)
+ seq->status = DATAOUT_SEQUENCE_COMPLETE;
+ cmd->first_burst_len = 0;
+ cmd->unsolicited_data = 0;
+ }
+ } else {
+ if (conn->sess->sess_ops->DataSequenceInOrder) {
+ if ((cmd->next_burst_len + payload_length) ==
+ conn->sess->sess_ops->MaxBurstLength) {
+ if (iscsit_dataout_update_r2t(cmd, hdr->offset,
+ payload_length) < 0)
+ return DATAOUT_CANNOT_RECOVER;
+ send_r2t = 1;
+ }
+
+ if (!conn->sess->sess_ops->DataPDUInOrder) {
+ ret = iscsit_dataout_update_datapduinorder_no(
+ cmd, hdr->datasn,
+ (hdr->flags & ISCSI_FLAG_CMD_FINAL));
+ if (ret == DATAOUT_CANNOT_RECOVER)
+ return ret;
+ }
+
+ cmd->next_burst_len += payload_length;
+ cmd->data_sn++;
+
+ if (send_r2t)
+ cmd->next_burst_len = 0;
+ } else {
+ seq = cmd->seq_ptr;
+
+ if ((seq->next_burst_len + payload_length) ==
+ seq->xfer_len) {
+ if (iscsit_dataout_update_r2t(cmd, hdr->offset,
+ payload_length) < 0)
+ return DATAOUT_CANNOT_RECOVER;
+ send_r2t = 1;
+ }
+
+ if (!conn->sess->sess_ops->DataPDUInOrder) {
+ ret = iscsit_dataout_update_datapduinorder_no(
+ cmd, hdr->datasn,
+ (hdr->flags & ISCSI_FLAG_CMD_FINAL));
+ if (ret == DATAOUT_CANNOT_RECOVER)
+ return ret;
+ }
+
+ seq->data_sn++;
+ seq->offset += payload_length;
+ seq->next_burst_len += payload_length;
+
+ if (send_r2t) {
+ seq->next_burst_len = 0;
+ seq->status = DATAOUT_SEQUENCE_COMPLETE;
+ }
+ }
+ }
+
+ if (send_r2t && conn->sess->sess_ops->DataSequenceInOrder)
+ cmd->data_sn = 0;
+
+ cmd->write_data_done += payload_length;
+
+ return (cmd->write_data_done == cmd->data_length) ?
+ DATAOUT_SEND_TO_TRANSPORT : (send_r2t) ?
+ DATAOUT_SEND_R2T : DATAOUT_NORMAL;
+}
+
+static int iscsit_dataout_post_crc_failed(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf)
+{
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_pdu *pdu;
+ struct iscsi_data *hdr = (struct iscsi_data *) buf;
+ u32 payload_length = ntoh24(hdr->dlength);
+
+ if (conn->sess->sess_ops->DataPDUInOrder)
+ goto recover;
+ /*
+ * The rest of this function is only called when DataPDUInOrder=No.
+ */
+ pdu = cmd->pdu_ptr;
+
+ switch (pdu->status) {
+ case ISCSI_PDU_NOT_RECEIVED:
+ pdu->status = ISCSI_PDU_CRC_FAILED;
+ break;
+ case ISCSI_PDU_CRC_FAILED:
+ break;
+ case ISCSI_PDU_TIMED_OUT:
+ pdu->status = ISCSI_PDU_CRC_FAILED;
+ break;
+ default:
+ return DATAOUT_CANNOT_RECOVER;
+ }
+
+recover:
+ return iscsit_recover_dataout_sequence(cmd, hdr->offset, payload_length);
+}
+
+/*
+ * Called from iscsit_handle_data_out() before DataOUT Payload is received
+ * and CRC computed.
+ */
+extern int iscsit_check_pre_dataout(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf)
+{
+ int ret;
+ struct iscsi_conn *conn = cmd->conn;
+
+ ret = iscsit_dataout_within_command_recovery_check(cmd, buf);
+ if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
+ (ret == DATAOUT_CANNOT_RECOVER))
+ return ret;
+
+ ret = iscsit_dataout_check_datasn(cmd, buf);
+ if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
+ (ret == DATAOUT_CANNOT_RECOVER))
+ return ret;
+
+ if (cmd->unsolicited_data) {
+ ret = iscsit_dataout_check_unsolicited_sequence(cmd, buf);
+ if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
+ (ret == DATAOUT_CANNOT_RECOVER))
+ return ret;
+ } else {
+ ret = iscsit_dataout_check_sequence(cmd, buf);
+ if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
+ (ret == DATAOUT_CANNOT_RECOVER))
+ return ret;
+ }
+
+ return (conn->sess->sess_ops->DataPDUInOrder) ?
+ iscsit_dataout_pre_datapduinorder_yes(cmd, buf) :
+ iscsit_dataout_pre_datapduinorder_no(cmd, buf);
+}
+
+/*
+ * Called from iscsit_handle_data_out() after DataOUT Payload is received
+ * and CRC computed.
+ */
+int iscsit_check_post_dataout(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf,
+ u8 data_crc_failed)
+{
+ struct iscsi_conn *conn = cmd->conn;
+
+ cmd->dataout_timeout_retries = 0;
+
+ if (!data_crc_failed)
+ return iscsit_dataout_post_crc_passed(cmd, buf);
+ else {
+ if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
+ printk(KERN_ERR "Unable to recover from DataOUT CRC"
+ " failure while ERL=0, closing session.\n");
+ iscsit_add_reject_from_cmd(ISCSI_REASON_DATA_DIGEST_ERROR,
+ 1, 0, buf, cmd);
+ return DATAOUT_CANNOT_RECOVER;
+ }
+
+ iscsit_add_reject_from_cmd(ISCSI_REASON_DATA_DIGEST_ERROR,
+ 0, 0, buf, cmd);
+ return iscsit_dataout_post_crc_failed(cmd, buf);
+ }
+}
+
+static void iscsit_handle_time2retain_timeout(unsigned long data)
+{
+ struct iscsi_session *sess = (struct iscsi_session *) data;
+ struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
+ struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
+
+ spin_lock_bh(&se_tpg->session_lock);
+ if (sess->time2retain_timer_flags & ISCSI_TF_STOP) {
+ spin_unlock_bh(&se_tpg->session_lock);
+ return;
+ }
+ if (atomic_read(&sess->session_reinstatement)) {
+ printk(KERN_ERR "Exiting Time2Retain handler because"
+ " session_reinstatement=1\n");
+ spin_unlock_bh(&se_tpg->session_lock);
+ return;
+ }
+ sess->time2retain_timer_flags |= ISCSI_TF_EXPIRED;
+
+ printk(KERN_ERR "Time2Retain timer expired for SID: %u, cleaning up"
+ " iSCSI session.\n", sess->sid);
+ {
+ struct iscsi_tiqn *tiqn = tpg->tpg_tiqn;
+
+ if (tiqn) {
+ spin_lock(&tiqn->sess_err_stats.lock);
+ strcpy(tiqn->sess_err_stats.last_sess_fail_rem_name,
+ (void *)sess->sess_ops->InitiatorName);
+ tiqn->sess_err_stats.last_sess_failure_type =
+ ISCSI_SESS_ERR_CXN_TIMEOUT;
+ tiqn->sess_err_stats.cxn_timeout_errors++;
+ sess->conn_timeout_errors++;
+ spin_unlock(&tiqn->sess_err_stats.lock);
+ }
+ }
+
+ spin_unlock_bh(&se_tpg->session_lock);
+ iscsit_close_session(sess);
+}
+
+extern void iscsit_start_time2retain_handler(struct iscsi_session *sess)
+{
+ int tpg_active;
+ /*
+ * Only start Time2Retain timer when the assoicated TPG is still in
+ * an ACTIVE (eg: not disabled or shutdown) state.
+ */
+ spin_lock(&ISCSI_TPG_S(sess)->tpg_state_lock);
+ tpg_active = (ISCSI_TPG_S(sess)->tpg_state == TPG_STATE_ACTIVE);
+ spin_unlock(&ISCSI_TPG_S(sess)->tpg_state_lock);
+
+ if (!tpg_active)
+ return;
+
+ if (sess->time2retain_timer_flags & ISCSI_TF_RUNNING)
+ return;
+
+ TRACE(TRACE_TIMER, "Starting Time2Retain timer for %u seconds on"
+ " SID: %u\n", sess->sess_ops->DefaultTime2Retain, sess->sid);
+
+ init_timer(&sess->time2retain_timer);
+ sess->time2retain_timer.expires =
+ (get_jiffies_64() + sess->sess_ops->DefaultTime2Retain * HZ);
+ sess->time2retain_timer.data = (unsigned long)sess;
+ sess->time2retain_timer.function = iscsit_handle_time2retain_timeout;
+ sess->time2retain_timer_flags &= ~ISCSI_TF_STOP;
+ sess->time2retain_timer_flags |= ISCSI_TF_RUNNING;
+ add_timer(&sess->time2retain_timer);
+}
+
+/*
+ * Called with spin_lock_bh(&struct se_portal_group->session_lock) held
+ */
+extern int iscsit_stop_time2retain_timer(struct iscsi_session *sess)
+{
+ struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
+ struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
+
+ if (sess->time2retain_timer_flags & ISCSI_TF_EXPIRED)
+ return -1;
+
+ if (!(sess->time2retain_timer_flags & ISCSI_TF_RUNNING))
+ return 0;
+
+ sess->time2retain_timer_flags |= ISCSI_TF_STOP;
+ spin_unlock_bh(&se_tpg->session_lock);
+
+ del_timer_sync(&sess->time2retain_timer);
+
+ spin_lock_bh(&se_tpg->session_lock);
+ sess->time2retain_timer_flags &= ~ISCSI_TF_RUNNING;
+ TRACE(TRACE_TIMER, "Stopped Time2Retain Timer for SID: %u\n",
+ sess->sid);
+ return 0;
+}
+
+void iscsit_connection_reinstatement_rcfr(struct iscsi_conn *conn)
+{
+ spin_lock_bh(&conn->state_lock);
+ if (atomic_read(&conn->connection_exit)) {
+ spin_unlock_bh(&conn->state_lock);
+ goto sleep;
+ }
+
+ if (atomic_read(&conn->transport_failed)) {
+ spin_unlock_bh(&conn->state_lock);
+ goto sleep;
+ }
+ spin_unlock_bh(&conn->state_lock);
+
+ iscsi_thread_set_force_reinstatement(conn);
+
+sleep:
+ wait_for_completion(&conn->conn_wait_rcfr_comp);
+ complete(&conn->conn_post_wait_comp);
+}
+
+void iscsit_cause_connection_reinstatement(struct iscsi_conn *conn, int sleep)
+{
+ spin_lock_bh(&conn->state_lock);
+ if (atomic_read(&conn->connection_exit)) {
+ spin_unlock_bh(&conn->state_lock);
+ return;
+ }
+
+ if (atomic_read(&conn->transport_failed)) {
+ spin_unlock_bh(&conn->state_lock);
+ return;
+ }
+
+ if (atomic_read(&conn->connection_reinstatement)) {
+ spin_unlock_bh(&conn->state_lock);
+ return;
+ }
+
+ if (iscsi_thread_set_force_reinstatement(conn) < 0) {
+ spin_unlock_bh(&conn->state_lock);
+ return;
+ }
+
+ atomic_set(&conn->connection_reinstatement, 1);
+ if (!sleep) {
+ spin_unlock_bh(&conn->state_lock);
+ return;
+ }
+
+ atomic_set(&conn->sleep_on_conn_wait_comp, 1);
+ spin_unlock_bh(&conn->state_lock);
+
+ wait_for_completion(&conn->conn_wait_comp);
+ complete(&conn->conn_post_wait_comp);
+}
+
+void iscsit_fall_back_to_erl0(struct iscsi_session *sess)
+{
+ TRACE(TRACE_ERL0, "Falling back to ErrorRecoveryLevel=0 for SID:"
+ " %u\n", sess->sid);
+
+ atomic_set(&sess->session_fall_back_to_erl0, 1);
+}
+
+static void iscsit_handle_connection_cleanup(struct iscsi_conn *conn)
+{
+ struct iscsi_session *sess = conn->sess;
+
+ if ((sess->sess_ops->ErrorRecoveryLevel == 2) &&
+ !atomic_read(&sess->session_reinstatement) &&
+ !atomic_read(&sess->session_fall_back_to_erl0))
+ iscsit_connection_recovery_transport_reset(conn);
+ else {
+ TRACE(TRACE_ERL0, "Performing cleanup for failed iSCSI"
+ " Connection ID: %hu from %s\n", conn->cid,
+ sess->sess_ops->InitiatorName);
+ iscsit_close_connection(conn);
+ }
+}
+
+extern void iscsit_take_action_for_connection_exit(struct iscsi_conn *conn)
+{
+ spin_lock_bh(&conn->state_lock);
+ if (atomic_read(&conn->connection_exit)) {
+ spin_unlock_bh(&conn->state_lock);
+ return;
+ }
+ atomic_set(&conn->connection_exit, 1);
+
+ if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT) {
+ spin_unlock_bh(&conn->state_lock);
+ iscsit_close_connection(conn);
+ return;
+ }
+
+ if (conn->conn_state == TARG_CONN_STATE_CLEANUP_WAIT) {
+ spin_unlock_bh(&conn->state_lock);
+ return;
+ }
+
+ TRACE(TRACE_STATE, "Moving to TARG_CONN_STATE_CLEANUP_WAIT.\n");
+ conn->conn_state = TARG_CONN_STATE_CLEANUP_WAIT;
+ spin_unlock_bh(&conn->state_lock);
+
+ iscsit_handle_connection_cleanup(conn);
+}
+
+/*
+ * This is the simple function that makes the magic of
+ * sync and steering happen in the follow paradoxical order:
+ *
+ * 0) Receive conn->of_marker (bytes left until next OFMarker)
+ * bytes into an offload buffer. When we pass the exact number
+ * of bytes in conn->of_marker, iscsit_dump_data_payload() and hence
+ * rx_data() will automatically receive the identical u32 marker
+ * values and store it in conn->of_marker_offset;
+ * 1) Now conn->of_marker_offset will contain the offset to the start
+ * of the next iSCSI PDU. Dump these remaining bytes into another
+ * offload buffer.
+ * 2) We are done!
+ * Next byte in the TCP stream will contain the next iSCSI PDU!
+ * Cool Huh?!
+ */
+int iscsit_recover_from_unknown_opcode(struct iscsi_conn *conn)
+{
+ /*
+ * Make sure the remaining bytes to next maker is a sane value.
+ */
+ if (conn->of_marker > (conn->conn_ops->OFMarkInt * 4)) {
+ printk(KERN_ERR "Remaining bytes to OFMarker: %u exceeds"
+ " OFMarkInt bytes: %u.\n", conn->of_marker,
+ conn->conn_ops->OFMarkInt * 4);
+ return -1;
+ }
+
+ TRACE(TRACE_ERL1, "Advancing %u bytes in TCP stream to get to the"
+ " next OFMarker.\n", conn->of_marker);
+
+ if (iscsit_dump_data_payload(conn, conn->of_marker, 0) < 0)
+ return -1;
+
+ /*
+ * Make sure the offset marker we retrived is a valid value.
+ */
+ if (conn->of_marker_offset > (ISCSI_HDR_LEN + (ISCSI_CRC_LEN * 2) +
+ conn->conn_ops->MaxRecvDataSegmentLength)) {
+ printk(KERN_ERR "OfMarker offset value: %u exceeds limit.\n",
+ conn->of_marker_offset);
+ return -1;
+ }
+
+ TRACE(TRACE_ERL1, "Discarding %u bytes of TCP stream to get to the"
+ " next iSCSI Opcode.\n", conn->of_marker_offset);
+
+ if (iscsit_dump_data_payload(conn, conn->of_marker_offset, 0) < 0)
+ return -1;
+
+ return 0;
+}
diff --git a/drivers/target/iscsi/iscsi_target_erl0.h b/drivers/target/iscsi/iscsi_target_erl0.h
new file mode 100644
index 0000000..21acc9a
--- /dev/null
+++ b/drivers/target/iscsi/iscsi_target_erl0.h
@@ -0,0 +1,15 @@
+#ifndef ISCSI_TARGET_ERL0_H
+#define ISCSI_TARGET_ERL0_H
+
+extern void iscsit_set_dataout_sequence_values(struct iscsi_cmd *);
+extern int iscsit_check_pre_dataout(struct iscsi_cmd *, unsigned char *);
+extern int iscsit_check_post_dataout(struct iscsi_cmd *, unsigned char *, u8);
+extern void iscsit_start_time2retain_handler(struct iscsi_session *);
+extern int iscsit_stop_time2retain_timer(struct iscsi_session *);
+extern void iscsit_connection_reinstatement_rcfr(struct iscsi_conn *);
+extern void iscsit_cause_connection_reinstatement(struct iscsi_conn *, int);
+extern void iscsit_fall_back_to_erl0(struct iscsi_session *);
+extern void iscsit_take_action_for_connection_exit(struct iscsi_conn *);
+extern int iscsit_recover_from_unknown_opcode(struct iscsi_conn *);
+
+#endif /*** ISCSI_TARGET_ERL0_H ***/
diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c
new file mode 100644
index 0000000..c52f457
--- /dev/null
+++ b/drivers/target/iscsi/iscsi_target_erl1.c
@@ -0,0 +1,1306 @@
+/*******************************************************************************
+ * This file contains error recovery level one used by the iSCSI Target driver.
+ *
+ * © Copyright 2007-2011 RisingTide Systems LLC.
+ *
+ * Licensed to the Linux Foundation under the General Public License (GPL) version 2.
+ *
+ * Author: Nicholas A. Bellinger <nab@...ux-iscsi.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ ******************************************************************************/
+
+#include <linux/list.h>
+#include <scsi/iscsi_proto.h>
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+
+#include "iscsi_target_debug.h"
+#include "iscsi_target_core.h"
+#include "iscsi_target_seq_pdu_list.h"
+#include "iscsi_target_datain_values.h"
+#include "iscsi_target_device.h"
+#include "iscsi_target_tpg.h"
+#include "iscsi_target_util.h"
+#include "iscsi_target_erl0.h"
+#include "iscsi_target_erl1.h"
+#include "iscsi_target_erl2.h"
+#include "iscsi_target.h"
+
+#define OFFLOAD_BUF_SIZE 32768
+
+/*
+ * Used to dump excess datain payload for certain error recovery
+ * situations. Receive in OFFLOAD_BUF_SIZE max of datain per rx_data().
+ *
+ * dump_padding_digest denotes if padding and data digests need
+ * to be dumped.
+ */
+int iscsit_dump_data_payload(
+ struct iscsi_conn *conn,
+ u32 buf_len,
+ int dump_padding_digest)
+{
+ char *buf, pad_bytes[4];
+ int ret = DATAOUT_WITHIN_COMMAND_RECOVERY, rx_got;
+ u32 length, padding, offset = 0, size;
+ struct kvec iov;
+
+ length = (buf_len > OFFLOAD_BUF_SIZE) ? OFFLOAD_BUF_SIZE : buf_len;
+
+ buf = kzalloc(length, GFP_ATOMIC);
+ if (!buf) {
+ printk(KERN_ERR "Unable to allocate %u bytes for offload"
+ " buffer.\n", length);
+ return -1;
+ }
+ memset(&iov, 0, sizeof(struct kvec));
+
+ while (offset < buf_len) {
+ size = ((offset + length) > buf_len) ?
+ (buf_len - offset) : length;
+
+ iov.iov_len = size;
+ iov.iov_base = buf;
+
+ rx_got = rx_data(conn, &iov, 1, size);
+ if (rx_got != size) {
+ ret = DATAOUT_CANNOT_RECOVER;
+ goto out;
+ }
+
+ offset += size;
+ }
+
+ if (!dump_padding_digest)
+ goto out;
+
+ padding = ((-buf_len) & 3);
+ if (padding != 0) {
+ iov.iov_len = padding;
+ iov.iov_base = pad_bytes;
+
+ rx_got = rx_data(conn, &iov, 1, padding);
+ if (rx_got != padding) {
+ ret = DATAOUT_CANNOT_RECOVER;
+ goto out;
+ }
+ }
+
+ if (conn->conn_ops->DataDigest) {
+ u32 data_crc;
+
+ iov.iov_len = ISCSI_CRC_LEN;
+ iov.iov_base = &data_crc;
+
+ rx_got = rx_data(conn, &iov, 1, ISCSI_CRC_LEN);
+ if (rx_got != ISCSI_CRC_LEN) {
+ ret = DATAOUT_CANNOT_RECOVER;
+ goto out;
+ }
+ }
+
+out:
+ kfree(buf);
+ return ret;
+}
+
+/*
+ * Used for retransmitting R2Ts from a R2T SNACK request.
+ */
+static int iscsit_send_recovery_r2t_for_snack(
+ struct iscsi_cmd *cmd,
+ struct iscsi_r2t *r2t)
+{
+ /*
+ * If the struct iscsi_r2t has not been sent yet, we can safely
+ * ignore retransmission
+ * of the R2TSN in question.
+ */
+ spin_lock_bh(&cmd->r2t_lock);
+ if (!r2t->sent_r2t) {
+ spin_unlock_bh(&cmd->r2t_lock);
+ return 0;
+ }
+ r2t->sent_r2t = 0;
+ spin_unlock_bh(&cmd->r2t_lock);
+
+ iscsit_add_cmd_to_immediate_queue(cmd, cmd->conn, ISTATE_SEND_R2T);
+
+ return 0;
+}
+
+static int iscsit_handle_r2t_snack(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf,
+ u32 begrun,
+ u32 runlength)
+{
+ u32 last_r2tsn;
+ struct iscsi_r2t *r2t;
+
+ /*
+ * Make sure the initiator is not requesting retransmission
+ * of R2TSNs already acknowledged by a TMR TASK_REASSIGN.
+ */
+ if ((cmd->cmd_flags & ICF_GOT_DATACK_SNACK) &&
+ (begrun <= cmd->acked_data_sn)) {
+ printk(KERN_ERR "ITT: 0x%08x, R2T SNACK requesting"
+ " retransmission of R2TSN: 0x%08x to 0x%08x but already"
+ " acked to R2TSN: 0x%08x by TMR TASK_REASSIGN,"
+ " protocol error.\n", cmd->init_task_tag, begrun,
+ (begrun + runlength), cmd->acked_data_sn);
+
+ return iscsit_add_reject_from_cmd(
+ ISCSI_REASON_PROTOCOL_ERROR,
+ 1, 0, buf, cmd);
+ }
+
+ if (runlength) {
+ if ((begrun + runlength) > cmd->r2t_sn) {
+ printk(KERN_ERR "Command ITT: 0x%08x received R2T SNACK"
+ " with BegRun: 0x%08x, RunLength: 0x%08x, exceeds"
+ " current R2TSN: 0x%08x, protocol error.\n",
+ cmd->init_task_tag, begrun, runlength, cmd->r2t_sn);
+ return iscsit_add_reject_from_cmd(
+ ISCSI_REASON_BOOKMARK_INVALID, 1, 0, buf, cmd);
+ }
+ last_r2tsn = (begrun + runlength);
+ } else
+ last_r2tsn = cmd->r2t_sn;
+
+ while (begrun < last_r2tsn) {
+ r2t = iscsit_get_holder_for_r2tsn(cmd, begrun);
+ if (!r2t)
+ return -1;
+ if (iscsit_send_recovery_r2t_for_snack(cmd, r2t) < 0)
+ return -1;
+
+ begrun++;
+ }
+
+ return 0;
+}
+
+/*
+ * Generates Offsets and NextBurstLength based on Begrun and Runlength
+ * carried in a Data SNACK or ExpDataSN in TMR TASK_REASSIGN.
+ *
+ * For DataSequenceInOrder=Yes and DataPDUInOrder=[Yes,No] only.
+ *
+ * FIXME: How is this handled for a RData SNACK?
+ */
+int iscsit_create_recovery_datain_values_datasequenceinorder_yes(
+ struct iscsi_cmd *cmd,
+ struct iscsi_datain_req *dr)
+{
+ u32 data_sn = 0, data_sn_count = 0;
+ u32 pdu_start = 0, seq_no = 0;
+ u32 begrun = dr->begrun;
+ struct iscsi_conn *conn = cmd->conn;
+
+ while (begrun > data_sn++) {
+ data_sn_count++;
+ if ((dr->next_burst_len +
+ conn->conn_ops->MaxRecvDataSegmentLength) <
+ conn->sess->sess_ops->MaxBurstLength) {
+ dr->read_data_done +=
+ conn->conn_ops->MaxRecvDataSegmentLength;
+ dr->next_burst_len +=
+ conn->conn_ops->MaxRecvDataSegmentLength;
+ } else {
+ dr->read_data_done +=
+ (conn->sess->sess_ops->MaxBurstLength -
+ dr->next_burst_len);
+ dr->next_burst_len = 0;
+ pdu_start += data_sn_count;
+ data_sn_count = 0;
+ seq_no++;
+ }
+ }
+
+ if (!conn->sess->sess_ops->DataPDUInOrder) {
+ cmd->seq_no = seq_no;
+ cmd->pdu_start = pdu_start;
+ cmd->pdu_send_order = data_sn_count;
+ }
+
+ return 0;
+}
+
+/*
+ * Generates Offsets and NextBurstLength based on Begrun and Runlength
+ * carried in a Data SNACK or ExpDataSN in TMR TASK_REASSIGN.
+ *
+ * For DataSequenceInOrder=No and DataPDUInOrder=[Yes,No] only.
+ *
+ * FIXME: How is this handled for a RData SNACK?
+ */
+int iscsit_create_recovery_datain_values_datasequenceinorder_no(
+ struct iscsi_cmd *cmd,
+ struct iscsi_datain_req *dr)
+{
+ int found_seq = 0, i;
+ u32 data_sn, read_data_done = 0, seq_send_order = 0;
+ u32 begrun = dr->begrun;
+ u32 runlength = dr->runlength;
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_seq *first_seq = NULL, *seq = NULL;
+
+ if (!cmd->seq_list) {
+ printk(KERN_ERR "struct iscsi_cmd->seq_list is NULL!\n");
+ return -1;
+ }
+
+ /*
+ * Calculate read_data_done for all sequences containing a
+ * first_datasn and last_datasn less than the BegRun.
+ *
+ * Locate the struct iscsi_seq the BegRun lies within and calculate
+ * NextBurstLenghth up to the DataSN based on MaxRecvDataSegmentLength.
+ *
+ * Also use struct iscsi_seq->seq_send_order to determine where to start.
+ */
+ for (i = 0; i < cmd->seq_count; i++) {
+ seq = &cmd->seq_list[i];
+
+ if (!seq->seq_send_order)
+ first_seq = seq;
+
+ /*
+ * No data has been transferred for this DataIN sequence, so the
+ * seq->first_datasn and seq->last_datasn have not been set.
+ */
+ if (!seq->sent) {
+#if 0
+ printk(KERN_ERR "Ignoring non-sent sequence 0x%08x ->"
+ " 0x%08x\n\n", seq->first_datasn,
+ seq->last_datasn);
+#endif
+ continue;
+ }
+
+ /*
+ * This DataIN sequence is precedes the received BegRun, add the
+ * total xfer_len of the sequence to read_data_done and reset
+ * seq->pdu_send_order.
+ */
+ if ((seq->first_datasn < begrun) &&
+ (seq->last_datasn < begrun)) {
+#if 0
+ printk(KERN_ERR "Pre BegRun sequence 0x%08x ->"
+ " 0x%08x\n", seq->first_datasn,
+ seq->last_datasn);
+#endif
+ read_data_done += cmd->seq_list[i].xfer_len;
+ seq->next_burst_len = seq->pdu_send_order = 0;
+ continue;
+ }
+
+ /*
+ * The BegRun lies within this DataIN sequence.
+ */
+ if ((seq->first_datasn <= begrun) &&
+ (seq->last_datasn >= begrun)) {
+#if 0
+ printk(KERN_ERR "Found sequence begrun: 0x%08x in"
+ " 0x%08x -> 0x%08x\n", begrun,
+ seq->first_datasn, seq->last_datasn);
+#endif
+ seq_send_order = seq->seq_send_order;
+ data_sn = seq->first_datasn;
+ seq->next_burst_len = seq->pdu_send_order = 0;
+ found_seq = 1;
+
+ /*
+ * For DataPDUInOrder=Yes, while the first DataSN of
+ * the sequence is less than the received BegRun, add
+ * the MaxRecvDataSegmentLength to read_data_done and
+ * to the sequence's next_burst_len;
+ *
+ * For DataPDUInOrder=No, while the first DataSN of the
+ * sequence is less than the received BegRun, find the
+ * struct iscsi_pdu of the DataSN in question and add the
+ * MaxRecvDataSegmentLength to read_data_done and to the
+ * sequence's next_burst_len;
+ */
+ if (conn->sess->sess_ops->DataPDUInOrder) {
+ while (data_sn < begrun) {
+ seq->pdu_send_order++;
+ read_data_done +=
+ conn->conn_ops->MaxRecvDataSegmentLength;
+ seq->next_burst_len +=
+ conn->conn_ops->MaxRecvDataSegmentLength;
+ data_sn++;
+ }
+ } else {
+ int j;
+ struct iscsi_pdu *pdu;
+
+ while (data_sn < begrun) {
+ seq->pdu_send_order++;
+
+ for (j = 0; j < seq->pdu_count; j++) {
+ pdu = &cmd->pdu_list[
+ seq->pdu_start + j];
+ if (pdu->data_sn == data_sn) {
+ read_data_done +=
+ pdu->length;
+ seq->next_burst_len +=
+ pdu->length;
+ }
+ }
+ data_sn++;
+ }
+ }
+ continue;
+ }
+
+ /*
+ * This DataIN sequence is larger than the received BegRun,
+ * reset seq->pdu_send_order and continue.
+ */
+ if ((seq->first_datasn > begrun) ||
+ (seq->last_datasn > begrun)) {
+#if 0
+ printk(KERN_ERR "Post BegRun sequence 0x%08x -> 0x%08x\n",
+ seq->first_datasn, seq->last_datasn);
+#endif
+ seq->next_burst_len = seq->pdu_send_order = 0;
+ continue;
+ }
+ }
+
+ if (!found_seq) {
+ if (!begrun) {
+ if (!first_seq) {
+ printk(KERN_ERR "ITT: 0x%08x, Begrun: 0x%08x"
+ " but first_seq is NULL\n",
+ cmd->init_task_tag, begrun);
+ return -1;
+ }
+ seq_send_order = first_seq->seq_send_order;
+ seq->next_burst_len = seq->pdu_send_order = 0;
+ goto done;
+ }
+
+ printk(KERN_ERR "Unable to locate struct iscsi_seq for ITT: 0x%08x,"
+ " BegRun: 0x%08x, RunLength: 0x%08x while"
+ " DataSequenceInOrder=No and DataPDUInOrder=%s.\n",
+ cmd->init_task_tag, begrun, runlength,
+ (conn->sess->sess_ops->DataPDUInOrder) ? "Yes" : "No");
+ return -1;
+ }
+
+done:
+ dr->read_data_done = read_data_done;
+ dr->seq_send_order = seq_send_order;
+
+ return 0;
+}
+
+static int iscsit_handle_recovery_datain(
+ struct iscsi_cmd *cmd,
+ unsigned char *buf,
+ u32 begrun,
+ u32 runlength)
+{
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_datain_req *dr;
+ struct se_cmd *se_cmd = &cmd->se_cmd;
+
+ if (!atomic_read(&se_cmd->t_task->t_transport_complete)) {
+ printk(KERN_ERR "Ignoring ITT: 0x%08x Data SNACK\n",
+ cmd->init_task_tag);
+ return 0;
+ }
+
+ /*
+ * Make sure the initiator is not requesting retransmission
+ * of DataSNs already acknowledged by a Data ACK SNACK.
+ */
+ if ((cmd->cmd_flags & ICF_GOT_DATACK_SNACK) &&
+ (begrun <= cmd->acked_data_sn)) {
+ printk(KERN_ERR "ITT: 0x%08x, Data SNACK requesting"
+ " retransmission of DataSN: 0x%08x to 0x%08x but"
+ " already acked to DataSN: 0x%08x by Data ACK SNACK,"
+ " protocol error.\n", cmd->init_task_tag, begrun,
+ (begrun + runlength), cmd->acked_data_sn);
+
+ return iscsit_add_reject_from_cmd(ISCSI_REASON_PROTOCOL_ERROR,
+ 1, 0, buf, cmd);
+ }
+
+ /*
+ * Make sure BegRun and RunLength in the Data SNACK are sane.
+ * Note: (cmd->data_sn - 1) will carry the maximum DataSN sent.
+ */
+ if ((begrun + runlength) > (cmd->data_sn - 1)) {
+ printk(KERN_ERR "Initiator requesting BegRun: 0x%08x, RunLength"
+ ": 0x%08x greater than maximum DataSN: 0x%08x.\n",
+ begrun, runlength, (cmd->data_sn - 1));
+ return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_INVALID,
+ 1, 0, buf, cmd);
+ }
+
+ dr = iscsit_allocate_datain_req();
+ if (!dr)
+ return iscsit_add_reject_from_cmd(ISCSI_REASON_BOOKMARK_NO_RESOURCES,
+ 1, 0, buf, cmd);
+
+ dr->data_sn = dr->begrun = begrun;
+ dr->runlength = runlength;
+ dr->generate_recovery_values = 1;
+ dr->recovery = DATAIN_WITHIN_COMMAND_RECOVERY;
+
+ iscsit_attach_datain_req(cmd, dr);
+
+ cmd->i_state = ISTATE_SEND_DATAIN;
+ iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
+
+ return 0;
+}
+
+int iscsit_handle_recovery_datain_or_r2t(
+ struct iscsi_conn *conn,
+ unsigned char *buf,
+ u32 init_task_tag,
+ u32 targ_xfer_tag,
+ u32 begrun,
+ u32 runlength)
+{
+ struct iscsi_cmd *cmd;
+
+ cmd = iscsit_find_cmd_from_itt(conn, init_task_tag);
+ if (!cmd)
+ return 0;
+
+ /*
+ * FIXME: This will not work for bidi commands.
+ */
+ switch (cmd->data_direction) {
+ case DMA_TO_DEVICE:
+ return iscsit_handle_r2t_snack(cmd, buf, begrun, runlength);
+ case DMA_FROM_DEVICE:
+ return iscsit_handle_recovery_datain(cmd, buf, begrun,
+ runlength);
+ default:
+ printk(KERN_ERR "Unknown cmd->data_direction: 0x%02x\n",
+ cmd->data_direction);
+ return -1;
+ }
+
+ return 0;
+}
+
+/* #warning FIXME: Status SNACK needs to be dependent on OPCODE!!! */
+int iscsit_handle_status_snack(
+ struct iscsi_conn *conn,
+ u32 init_task_tag,
+ u32 targ_xfer_tag,
+ u32 begrun,
+ u32 runlength)
+{
+ struct iscsi_cmd *cmd = NULL;
+ u32 last_statsn;
+ int found_cmd;
+
+ if (conn->exp_statsn > begrun) {
+ printk(KERN_ERR "Got Status SNACK Begrun: 0x%08x, RunLength:"
+ " 0x%08x but already got ExpStatSN: 0x%08x on CID:"
+ " %hu.\n", begrun, runlength, conn->exp_statsn,
+ conn->cid);
+ return 0;
+ }
+
+ last_statsn = (!runlength) ? conn->stat_sn : (begrun + runlength);
+
+ while (begrun < last_statsn) {
+ found_cmd = 0;
+
+ spin_lock_bh(&conn->cmd_lock);
+ list_for_each_entry(cmd, &conn->conn_cmd_list, i_list) {
+ if (cmd->stat_sn == begrun) {
+ found_cmd = 1;
+ break;
+ }
+ }
+ spin_unlock_bh(&conn->cmd_lock);
+
+ if (!found_cmd) {
+ printk(KERN_ERR "Unable to find StatSN: 0x%08x for"
+ " a Status SNACK, assuming this was a"
+ " protactic SNACK for an untransmitted"
+ " StatSN, ignoring.\n", begrun);
+ begrun++;
+ continue;
+ }
+
+ spin_lock_bh(&cmd->istate_lock);
+ if (cmd->i_state == ISTATE_SEND_DATAIN) {
+ spin_unlock_bh(&cmd->istate_lock);
+ printk(KERN_ERR "Ignoring Status SNACK for BegRun:"
+ " 0x%08x, RunLength: 0x%08x, assuming this was"
+ " a protactic SNACK for an untransmitted"
+ " StatSN\n", begrun, runlength);
+ begrun++;
+ continue;
+ }
+ spin_unlock_bh(&cmd->istate_lock);
+
+ cmd->i_state = ISTATE_SEND_STATUS_RECOVERY;
+ iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
+ begrun++;
+ }
+
+ return 0;
+}
+
+int iscsit_handle_data_ack(
+ struct iscsi_conn *conn,
+ u32 targ_xfer_tag,
+ u32 begrun,
+ u32 runlength)
+{
+ struct iscsi_cmd *cmd = NULL;
+
+ cmd = iscsit_find_cmd_from_ttt(conn, targ_xfer_tag);
+ if (!cmd) {
+ printk(KERN_ERR "Data ACK SNACK for TTT: 0x%08x is"
+ " invalid.\n", targ_xfer_tag);
+ return -1;
+ }
+
+ if (begrun <= cmd->acked_data_sn) {
+ printk(KERN_ERR "ITT: 0x%08x Data ACK SNACK BegRUN: 0x%08x is"
+ " less than the already acked DataSN: 0x%08x.\n",
+ cmd->init_task_tag, begrun, cmd->acked_data_sn);
+ return -1;
+ }
+
+ /*
+ * For Data ACK SNACK, BegRun is the next expected DataSN.
+ * (see iSCSI v19: 10.16.6)
+ */
+ cmd->cmd_flags |= ICF_GOT_DATACK_SNACK;
+ cmd->acked_data_sn = (begrun - 1);
+
+ TRACE(TRACE_ISCSI, "Received Data ACK SNACK for ITT: 0x%08x,"
+ " updated acked DataSN to 0x%08x.\n",
+ cmd->init_task_tag, cmd->acked_data_sn);
+
+ return 0;
+}
+
+static int iscsit_send_recovery_r2t(
+ struct iscsi_cmd *cmd,
+ u32 offset,
+ u32 xfer_len)
+{
+ int ret;
+
+ spin_lock_bh(&cmd->r2t_lock);
+ ret = iscsit_add_r2t_to_list(cmd, offset, xfer_len, 1, 0);
+ spin_unlock_bh(&cmd->r2t_lock);
+
+ return ret;
+}
+
+int iscsit_dataout_datapduinorder_no_fbit(
+ struct iscsi_cmd *cmd,
+ struct iscsi_pdu *pdu)
+{
+ int i, send_recovery_r2t = 0, recovery = 0;
+ u32 length = 0, offset = 0, pdu_count = 0, xfer_len = 0;
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_pdu *first_pdu = NULL;
+
+ /*
+ * Get an struct iscsi_pdu pointer to the first PDU, and total PDU count
+ * of the DataOUT sequence.
+ */
+ if (conn->sess->sess_ops->DataSequenceInOrder) {
+ for (i = 0; i < cmd->pdu_count; i++) {
+ if (cmd->pdu_list[i].seq_no == pdu->seq_no) {
+ if (!first_pdu)
+ first_pdu = &cmd->pdu_list[i];
+ xfer_len += cmd->pdu_list[i].length;
+ pdu_count++;
+ } else if (pdu_count)
+ break;
+ }
+ } else {
+ struct iscsi_seq *seq = cmd->seq_ptr;
+
+ first_pdu = &cmd->pdu_list[seq->pdu_start];
+ pdu_count = seq->pdu_count;
+ }
+
+ if (!first_pdu || !pdu_count)
+ return DATAOUT_CANNOT_RECOVER;
+
+ /*
+ * Loop through the ending DataOUT Sequence checking each struct iscsi_pdu.
+ * The following ugly logic does batching of not received PDUs.
+ */
+ for (i = 0; i < pdu_count; i++) {
+ if (first_pdu[i].status == ISCSI_PDU_RECEIVED_OK) {
+ if (!send_recovery_r2t)
+ continue;
+
+ if (iscsit_send_recovery_r2t(cmd, offset, length) < 0)
+ return DATAOUT_CANNOT_RECOVER;
+
+ send_recovery_r2t = length = offset = 0;
+ continue;
+ }
+ /*
+ * Set recovery = 1 for any missing, CRC failed, or timed
+ * out PDUs to let the DataOUT logic know that this sequence
+ * has not been completed yet.
+ *
+ * Also, only send a Recovery R2T for ISCSI_PDU_NOT_RECEIVED.
+ * We assume if the PDU either failed CRC or timed out
+ * that a Recovery R2T has already been sent.
+ */
+ recovery = 1;
+
+ if (first_pdu[i].status != ISCSI_PDU_NOT_RECEIVED)
+ continue;
+
+ if (!offset)
+ offset = first_pdu[i].offset;
+ length += first_pdu[i].length;
+
+ send_recovery_r2t = 1;
+ }
+
+ if (send_recovery_r2t)
+ if (iscsit_send_recovery_r2t(cmd, offset, length) < 0)
+ return DATAOUT_CANNOT_RECOVER;
+
+ return (!recovery) ? DATAOUT_NORMAL : DATAOUT_WITHIN_COMMAND_RECOVERY;
+}
+
+static int iscsit_recalculate_dataout_values(
+ struct iscsi_cmd *cmd,
+ u32 pdu_offset,
+ u32 pdu_length,
+ u32 *r2t_offset,
+ u32 *r2t_length)
+{
+ int i;
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_pdu *pdu = NULL;
+
+ if (conn->sess->sess_ops->DataSequenceInOrder) {
+ cmd->data_sn = 0;
+
+ if (conn->sess->sess_ops->DataPDUInOrder) {
+ *r2t_offset = cmd->write_data_done;
+ *r2t_length = (cmd->seq_end_offset -
+ cmd->write_data_done);
+ return 0;
+ }
+
+ *r2t_offset = cmd->seq_start_offset;
+ *r2t_length = (cmd->seq_end_offset - cmd->seq_start_offset);
+
+ for (i = 0; i < cmd->pdu_count; i++) {
+ pdu = &cmd->pdu_list[i];
+
+ if (pdu->status != ISCSI_PDU_RECEIVED_OK)
+ continue;
+
+ if ((pdu->offset >= cmd->seq_start_offset) &&
+ ((pdu->offset + pdu->length) <=
+ cmd->seq_end_offset)) {
+ if (!cmd->unsolicited_data)
+ cmd->next_burst_len -= pdu->length;
+ else
+ cmd->first_burst_len -= pdu->length;
+
+ cmd->write_data_done -= pdu->length;
+ pdu->status = ISCSI_PDU_NOT_RECEIVED;
+ }
+ }
+ } else {
+ struct iscsi_seq *seq = NULL;
+
+ seq = iscsit_get_seq_holder(cmd, pdu_offset, pdu_length);
+ if (!seq)
+ return -1;
+
+ *r2t_offset = seq->orig_offset;
+ *r2t_length = seq->xfer_len;
+
+ cmd->write_data_done -= (seq->offset - seq->orig_offset);
+ if (cmd->immediate_data)
+ cmd->first_burst_len = cmd->write_data_done;
+
+ seq->data_sn = 0;
+ seq->offset = seq->orig_offset;
+ seq->next_burst_len = 0;
+ seq->status = DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY;
+
+ if (conn->sess->sess_ops->DataPDUInOrder)
+ return 0;
+
+ for (i = 0; i < seq->pdu_count; i++) {
+ pdu = &cmd->pdu_list[i+seq->pdu_start];
+
+ if (pdu->status != ISCSI_PDU_RECEIVED_OK)
+ continue;
+
+ pdu->status = ISCSI_PDU_NOT_RECEIVED;
+ }
+ }
+
+ return 0;
+}
+
+int iscsit_recover_dataout_sequence(
+ struct iscsi_cmd *cmd,
+ u32 pdu_offset,
+ u32 pdu_length)
+{
+ u32 r2t_length = 0, r2t_offset = 0;
+
+ spin_lock_bh(&cmd->istate_lock);
+ cmd->cmd_flags |= ICF_WITHIN_COMMAND_RECOVERY;
+ spin_unlock_bh(&cmd->istate_lock);
+
+ if (iscsit_recalculate_dataout_values(cmd, pdu_offset, pdu_length,
+ &r2t_offset, &r2t_length) < 0)
+ return DATAOUT_CANNOT_RECOVER;
+
+ iscsit_send_recovery_r2t(cmd, r2t_offset, r2t_length);
+
+ return DATAOUT_WITHIN_COMMAND_RECOVERY;
+}
+
+static struct iscsi_ooo_cmdsn *iscsit_allocate_ooo_cmdsn(void)
+{
+ struct iscsi_ooo_cmdsn *ooo_cmdsn = NULL;
+
+ ooo_cmdsn = kmem_cache_zalloc(lio_ooo_cache, GFP_ATOMIC);
+ if (!ooo_cmdsn) {
+ printk(KERN_ERR "Unable to allocate memory for"
+ " struct iscsi_ooo_cmdsn.\n");
+ return NULL;
+ }
+ INIT_LIST_HEAD(&ooo_cmdsn->ooo_list);
+
+ return ooo_cmdsn;
+}
+
+/*
+ * Called with sess->cmdsn_lock held.
+ */
+static int iscsit_attach_ooo_cmdsn(
+ struct iscsi_session *sess,
+ struct iscsi_ooo_cmdsn *ooo_cmdsn)
+{
+ struct iscsi_ooo_cmdsn *ooo_tail, *ooo_tmp;
+ /*
+ * We attach the struct iscsi_ooo_cmdsn entry to the out of order
+ * list in increasing CmdSN order.
+ * This allows iscsi_execute_ooo_cmdsns() to detect any
+ * additional CmdSN holes while performing delayed execution.
+ */
+ if (list_empty(&sess->sess_ooo_cmdsn_list))
+ list_add_tail(&ooo_cmdsn->ooo_list,
+ &sess->sess_ooo_cmdsn_list);
+ else {
+ ooo_tail = list_entry(sess->sess_ooo_cmdsn_list.prev,
+ typeof(*ooo_tail), ooo_list);
+ /*
+ * CmdSN is greater than the tail of the list.
+ */
+ if (ooo_tail->cmdsn < ooo_cmdsn->cmdsn)
+ list_add_tail(&ooo_cmdsn->ooo_list,
+ &sess->sess_ooo_cmdsn_list);
+ else {
+ /*
+ * CmdSN is either lower than the head, or somewhere
+ * in the middle.
+ */
+ list_for_each_entry(ooo_tmp, &sess->sess_ooo_cmdsn_list,
+ ooo_list) {
+ while (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn)
+ continue;
+
+ list_add(&ooo_cmdsn->ooo_list,
+ &ooo_tmp->ooo_list);
+ break;
+ }
+ }
+ }
+ sess->ooo_cmdsn_count++;
+
+ TRACE(TRACE_CMDSN, "Set out of order CmdSN count for SID:"
+ " %u to %hu.\n", sess->sid, sess->ooo_cmdsn_count);
+
+ return 0;
+}
+
+/*
+ * Removes an struct iscsi_ooo_cmdsn from a session's list,
+ * called with struct iscsi_session->cmdsn_lock held.
+ */
+void iscsit_remove_ooo_cmdsn(
+ struct iscsi_session *sess,
+ struct iscsi_ooo_cmdsn *ooo_cmdsn)
+{
+ list_del(&ooo_cmdsn->ooo_list);
+ kmem_cache_free(lio_ooo_cache, ooo_cmdsn);
+}
+
+void iscsit_clear_ooo_cmdsns_for_conn(struct iscsi_conn *conn)
+{
+ struct iscsi_ooo_cmdsn *ooo_cmdsn;
+ struct iscsi_session *sess = conn->sess;
+
+ spin_lock(&sess->cmdsn_lock);
+ list_for_each_entry(ooo_cmdsn, &sess->sess_ooo_cmdsn_list, ooo_list) {
+ if (ooo_cmdsn->cid != conn->cid)
+ continue;
+
+ ooo_cmdsn->cmd = NULL;
+ }
+ spin_unlock(&sess->cmdsn_lock);
+}
+
+/*
+ * Called with sess->cmdsn_lock held.
+ */
+int iscsit_execute_ooo_cmdsns(struct iscsi_session *sess)
+{
+ int ooo_count = 0;
+ struct iscsi_cmd *cmd = NULL;
+ struct iscsi_ooo_cmdsn *ooo_cmdsn, *ooo_cmdsn_tmp;
+
+ list_for_each_entry_safe(ooo_cmdsn, ooo_cmdsn_tmp,
+ &sess->sess_ooo_cmdsn_list, ooo_list) {
+ if (ooo_cmdsn->cmdsn != sess->exp_cmd_sn)
+ continue;
+
+ if (!ooo_cmdsn->cmd) {
+ sess->exp_cmd_sn++;
+ iscsit_remove_ooo_cmdsn(sess, ooo_cmdsn);
+ continue;
+ }
+
+ cmd = ooo_cmdsn->cmd;
+ cmd->i_state = cmd->deferred_i_state;
+ ooo_count++;
+ sess->exp_cmd_sn++;
+ TRACE(TRACE_CMDSN, "Executing out of order CmdSN: 0x%08x,"
+ " incremented ExpCmdSN to 0x%08x.\n",
+ cmd->cmd_sn, sess->exp_cmd_sn);
+
+ iscsit_remove_ooo_cmdsn(sess, ooo_cmdsn);
+
+ if (iscsit_execute_cmd(cmd, 1) < 0)
+ return -1;
+
+ continue;
+ }
+
+ return ooo_count;
+}
+
+/*
+ * Called either:
+ *
+ * 1. With sess->cmdsn_lock held from iscsi_execute_ooo_cmdsns()
+ * or iscsi_check_received_cmdsn().
+ * 2. With no locks held directly from iscsi_handle_XXX_pdu() functions
+ * for immediate commands.
+ */
+int iscsit_execute_cmd(struct iscsi_cmd *cmd, int ooo)
+{
+ struct se_cmd *se_cmd = &cmd->se_cmd;
+ int lr = 0;
+
+ spin_lock_bh(&cmd->istate_lock);
+ if (ooo)
+ cmd->cmd_flags &= ~ICF_OOO_CMDSN;
+
+ switch (cmd->iscsi_opcode) {
+ case ISCSI_OP_SCSI_CMD:
+ /*
+ * Go ahead and send the CHECK_CONDITION status for
+ * any SCSI CDB exceptions that may have occurred, also
+ * handle the SCF_SCSI_RESERVATION_CONFLICT case here as well.
+ */
+ if (se_cmd->se_cmd_flags & SCF_SCSI_CDB_EXCEPTION) {
+ if (se_cmd->se_cmd_flags &
+ SCF_SCSI_RESERVATION_CONFLICT) {
+ cmd->i_state = ISTATE_SEND_STATUS;
+ spin_unlock_bh(&cmd->istate_lock);
+ iscsit_add_cmd_to_response_queue(cmd, cmd->conn,
+ cmd->i_state);
+ return 0;
+ }
+ spin_unlock_bh(&cmd->istate_lock);
+ /*
+ * Determine if delayed TASK_ABORTED status for WRITEs
+ * should be sent now if no unsolicited data out
+ * payloads are expected, or if the delayed status
+ * should be sent after unsolicited data out with
+ * ISCSI_FLAG_CMD_FINAL set in iscsi_handle_data_out()
+ */
+ if (transport_check_aborted_status(se_cmd,
+ (cmd->unsolicited_data == 0)) != 0)
+ return 0;
+ /*
+ * Otherwise send CHECK_CONDITION and sense for
+ * exception
+ */
+ return transport_send_check_condition_and_sense(se_cmd,
+ se_cmd->scsi_sense_reason, 0);
+ }
+ /*
+ * Special case for delayed CmdSN with Immediate
+ * Data and/or Unsolicited Data Out attached.
+ */
+ if (cmd->immediate_data) {
+ if (cmd->cmd_flags & ICF_GOT_LAST_DATAOUT) {
+ spin_unlock_bh(&cmd->istate_lock);
+ return transport_generic_handle_data(
+ &cmd->se_cmd);
+ }
+ spin_unlock_bh(&cmd->istate_lock);
+
+ if (!(cmd->cmd_flags &
+ ICF_NON_IMMEDIATE_UNSOLICITED_DATA)) {
+ /*
+ * Send the delayed TASK_ABORTED status for
+ * WRITEs if no more unsolicitied data is
+ * expected.
+ */
+ if (transport_check_aborted_status(se_cmd, 1)
+ != 0)
+ return 0;
+
+ iscsit_set_dataout_sequence_values(cmd);
+ iscsit_build_r2ts_for_cmd(cmd, cmd->conn, 0);
+ }
+ return 0;
+ }
+ /*
+ * The default handler.
+ */
+ spin_unlock_bh(&cmd->istate_lock);
+
+ if ((cmd->data_direction == DMA_TO_DEVICE) &&
+ !(cmd->cmd_flags & ICF_NON_IMMEDIATE_UNSOLICITED_DATA)) {
+ /*
+ * Send the delayed TASK_ABORTED status for WRITEs if
+ * no more nsolicitied data is expected.
+ */
+ if (transport_check_aborted_status(se_cmd, 1) != 0)
+ return 0;
+
+ iscsit_set_dataout_sequence_values(cmd);
+ spin_lock_bh(&cmd->dataout_timeout_lock);
+ iscsit_start_dataout_timer(cmd, cmd->conn);
+ spin_unlock_bh(&cmd->dataout_timeout_lock);
+ }
+ return transport_generic_handle_cdb(&cmd->se_cmd);
+
+ case ISCSI_OP_NOOP_OUT:
+ case ISCSI_OP_TEXT:
+ spin_unlock_bh(&cmd->istate_lock);
+ iscsit_add_cmd_to_response_queue(cmd, cmd->conn, cmd->i_state);
+ break;
+ case ISCSI_OP_SCSI_TMFUNC:
+ if (se_cmd->se_cmd_flags & SCF_SCSI_CDB_EXCEPTION) {
+ spin_unlock_bh(&cmd->istate_lock);
+ iscsit_add_cmd_to_response_queue(cmd, cmd->conn,
+ cmd->i_state);
+ return 0;
+ }
+ spin_unlock_bh(&cmd->istate_lock);
+
+ return transport_generic_handle_tmr(SE_CMD(cmd));
+ case ISCSI_OP_LOGOUT:
+ spin_unlock_bh(&cmd->istate_lock);
+ switch (cmd->logout_reason) {
+ case ISCSI_LOGOUT_REASON_CLOSE_SESSION:
+ lr = iscsit_logout_closesession(cmd, cmd->conn);
+ break;
+ case ISCSI_LOGOUT_REASON_CLOSE_CONNECTION:
+ lr = iscsit_logout_closeconnection(cmd, cmd->conn);
+ break;
+ case ISCSI_LOGOUT_REASON_RECOVERY:
+ lr = iscsit_logout_removeconnforrecovery(cmd, cmd->conn);
+ break;
+ default:
+ printk(KERN_ERR "Unknown iSCSI Logout Request Code:"
+ " 0x%02x\n", cmd->logout_reason);
+ return -1;
+ }
+
+ return lr;
+ default:
+ spin_unlock_bh(&cmd->istate_lock);
+ printk(KERN_ERR "Cannot perform out of order execution for"
+ " unknown iSCSI Opcode: 0x%02x\n", cmd->iscsi_opcode);
+ return -1;
+ }
+
+ return 0;
+}
+
+void iscsit_free_all_ooo_cmdsns(struct iscsi_session *sess)
+{
+ struct iscsi_ooo_cmdsn *ooo_cmdsn, *ooo_cmdsn_tmp;
+
+ spin_lock(&sess->cmdsn_lock);
+ list_for_each_entry_safe(ooo_cmdsn, ooo_cmdsn_tmp,
+ &sess->sess_ooo_cmdsn_list, ooo_list) {
+
+ list_del(&ooo_cmdsn->ooo_list);
+ kmem_cache_free(lio_ooo_cache, ooo_cmdsn);
+ }
+ spin_unlock(&sess->cmdsn_lock);
+}
+
+int iscsit_handle_ooo_cmdsn(
+ struct iscsi_session *sess,
+ struct iscsi_cmd *cmd,
+ u32 cmdsn)
+{
+ int batch = 0;
+ struct iscsi_ooo_cmdsn *ooo_cmdsn = NULL, *ooo_tail = NULL;
+
+ sess->cmdsn_outoforder = 1;
+
+ cmd->deferred_i_state = cmd->i_state;
+ cmd->i_state = ISTATE_DEFERRED_CMD;
+ cmd->cmd_flags |= ICF_OOO_CMDSN;
+
+ if (list_empty(&sess->sess_ooo_cmdsn_list))
+ batch = 1;
+ else {
+ ooo_tail = list_entry(sess->sess_ooo_cmdsn_list.prev,
+ typeof(*ooo_tail), ooo_list);
+ if (ooo_tail->cmdsn != (cmdsn - 1))
+ batch = 1;
+ }
+
+ ooo_cmdsn = iscsit_allocate_ooo_cmdsn();
+ if (!ooo_cmdsn)
+ return CMDSN_ERROR_CANNOT_RECOVER;
+
+ ooo_cmdsn->cmd = cmd;
+ ooo_cmdsn->batch_count = (batch) ?
+ (cmdsn - sess->exp_cmd_sn) : 1;
+ ooo_cmdsn->cid = cmd->conn->cid;
+ ooo_cmdsn->exp_cmdsn = sess->exp_cmd_sn;
+ ooo_cmdsn->cmdsn = cmdsn;
+
+ if (iscsit_attach_ooo_cmdsn(sess, ooo_cmdsn) < 0) {
+ kmem_cache_free(lio_ooo_cache, ooo_cmdsn);
+ return CMDSN_ERROR_CANNOT_RECOVER;
+ }
+
+ return CMDSN_HIGHER_THAN_EXP;
+}
+
+static int iscsit_set_dataout_timeout_values(
+ struct iscsi_cmd *cmd,
+ u32 *offset,
+ u32 *length)
+{
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_r2t *r2t;
+
+ if (cmd->unsolicited_data) {
+ *offset = 0;
+ *length = (conn->sess->sess_ops->FirstBurstLength >
+ cmd->data_length) ?
+ cmd->data_length :
+ conn->sess->sess_ops->FirstBurstLength;
+ return 0;
+ }
+
+ spin_lock_bh(&cmd->r2t_lock);
+ if (list_empty(&cmd->cmd_r2t_list)) {
+ printk(KERN_ERR "cmd->cmd_r2t_list is empty!\n");
+ spin_unlock_bh(&cmd->r2t_lock);
+ return -1;
+ }
+
+ list_for_each_entry(r2t, &cmd->cmd_r2t_list, r2t_list) {
+ if (r2t->sent_r2t && !r2t->recovery_r2t && !r2t->seq_complete) {
+ *offset = r2t->offset;
+ *length = r2t->xfer_len;
+ spin_unlock_bh(&cmd->r2t_lock);
+ return 0;
+ }
+ }
+ spin_unlock_bh(&cmd->r2t_lock);
+
+ printk(KERN_ERR "Unable to locate any incomplete DataOUT"
+ " sequences for ITT: 0x%08x.\n", cmd->init_task_tag);
+
+ return -1;
+}
+
+/*
+ * NOTE: Called from interrupt (timer) context.
+ */
+static void iscsit_handle_dataout_timeout(unsigned long data)
+{
+ u32 pdu_length = 0, pdu_offset = 0;
+ u32 r2t_length = 0, r2t_offset = 0;
+ struct iscsi_cmd *cmd = (struct iscsi_cmd *) data;
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_session *sess = NULL;
+ struct iscsi_node_attrib *na;
+
+ iscsit_inc_conn_usage_count(conn);
+
+ spin_lock_bh(&cmd->dataout_timeout_lock);
+ if (cmd->dataout_timer_flags & ISCSI_TF_STOP) {
+ spin_unlock_bh(&cmd->dataout_timeout_lock);
+ iscsit_dec_conn_usage_count(conn);
+ return;
+ }
+ cmd->dataout_timer_flags &= ~ISCSI_TF_RUNNING;
+ sess = conn->sess;
+ na = iscsit_tpg_get_node_attrib(sess);
+
+ if (!sess->sess_ops->ErrorRecoveryLevel) {
+ TRACE(TRACE_ERL0, "Unable to recover from DataOut timeout while"
+ " in ERL=0.\n");
+ goto failure;
+ }
+
+ if (++cmd->dataout_timeout_retries == na->dataout_timeout_retries) {
+ TRACE(TRACE_TIMER, "Command ITT: 0x%08x exceeded max retries"
+ " for DataOUT timeout %u, closing iSCSI connection.\n",
+ cmd->init_task_tag, na->dataout_timeout_retries);
+ goto failure;
+ }
+
+ cmd->cmd_flags |= ICF_WITHIN_COMMAND_RECOVERY;
+
+ if (conn->sess->sess_ops->DataSequenceInOrder) {
+ if (conn->sess->sess_ops->DataPDUInOrder) {
+ pdu_offset = cmd->write_data_done;
+ if ((pdu_offset + (conn->sess->sess_ops->MaxBurstLength -
+ cmd->next_burst_len)) > cmd->data_length)
+ pdu_length = (cmd->data_length -
+ cmd->write_data_done);
+ else
+ pdu_length = (conn->sess->sess_ops->MaxBurstLength -
+ cmd->next_burst_len);
+ } else {
+ pdu_offset = cmd->seq_start_offset;
+ pdu_length = (cmd->seq_end_offset -
+ cmd->seq_start_offset);
+ }
+ } else {
+ if (iscsit_set_dataout_timeout_values(cmd, &pdu_offset,
+ &pdu_length) < 0)
+ goto failure;
+ }
+
+ if (iscsit_recalculate_dataout_values(cmd, pdu_offset, pdu_length,
+ &r2t_offset, &r2t_length) < 0)
+ goto failure;
+
+ TRACE(TRACE_TIMER, "Command ITT: 0x%08x timed out waiting for"
+ " completion of %sDataOUT Sequence Offset: %u, Length: %u\n",
+ cmd->init_task_tag, (cmd->unsolicited_data) ? "Unsolicited " :
+ "", r2t_offset, r2t_length);
+
+ if (iscsit_send_recovery_r2t(cmd, r2t_offset, r2t_length) < 0)
+ goto failure;
+
+ iscsit_start_dataout_timer(cmd, conn);
+ spin_unlock_bh(&cmd->dataout_timeout_lock);
+ iscsit_dec_conn_usage_count(conn);
+
+ return;
+
+failure:
+ spin_unlock_bh(&cmd->dataout_timeout_lock);
+ iscsit_cause_connection_reinstatement(conn, 0);
+ iscsit_dec_conn_usage_count(conn);
+}
+
+void iscsit_mod_dataout_timer(struct iscsi_cmd *cmd)
+{
+ struct iscsi_conn *conn = cmd->conn;
+ struct iscsi_session *sess = conn->sess;
+ struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess);
+
+ spin_lock_bh(&cmd->dataout_timeout_lock);
+ if (!(cmd->dataout_timer_flags & ISCSI_TF_RUNNING)) {
+ spin_unlock_bh(&cmd->dataout_timeout_lock);
+ return;
+ }
+
+ mod_timer(&cmd->dataout_timer,
+ (get_jiffies_64() + na->dataout_timeout * HZ));
+ TRACE(TRACE_TIMER, "Updated DataOUT timer for ITT: 0x%08x",
+ cmd->init_task_tag);
+ spin_unlock_bh(&cmd->dataout_timeout_lock);
+}
+
+/*
+ * Called with cmd->dataout_timeout_lock held.
+ */
+void iscsit_start_dataout_timer(
+ struct iscsi_cmd *cmd,
+ struct iscsi_conn *conn)
+{
+ struct iscsi_session *sess = conn->sess;
+ struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess);
+
+ if (cmd->dataout_timer_flags & ISCSI_TF_RUNNING)
+ return;
+
+ TRACE(TRACE_TIMER, "Starting DataOUT timer for ITT: 0x%08x on"
+ " CID: %hu.\n", cmd->init_task_tag, conn->cid);
+
+ init_timer(&cmd->dataout_timer);
+ cmd->dataout_timer.expires = (get_jiffies_64() + na->dataout_timeout * HZ);
+ cmd->dataout_timer.data = (unsigned long)cmd;
+ cmd->dataout_timer.function = iscsit_handle_dataout_timeout;
+ cmd->dataout_timer_flags &= ~ISCSI_TF_STOP;
+ cmd->dataout_timer_flags |= ISCSI_TF_RUNNING;
+ add_timer(&cmd->dataout_timer);
+}
+
+void iscsit_stop_dataout_timer(struct iscsi_cmd *cmd)
+{
+ spin_lock_bh(&cmd->dataout_timeout_lock);
+ if (!(cmd->dataout_timer_flags & ISCSI_TF_RUNNING)) {
+ spin_unlock_bh(&cmd->dataout_timeout_lock);
+ return;
+ }
+ cmd->dataout_timer_flags |= ISCSI_TF_STOP;
+ spin_unlock_bh(&cmd->dataout_timeout_lock);
+
+ del_timer_sync(&cmd->dataout_timer);
+
+ spin_lock_bh(&cmd->dataout_timeout_lock);
+ cmd->dataout_timer_flags &= ~ISCSI_TF_RUNNING;
+ TRACE(TRACE_TIMER, "Stopped DataOUT Timer for ITT: 0x%08x\n",
+ cmd->init_task_tag);
+ spin_unlock_bh(&cmd->dataout_timeout_lock);
+}
diff --git a/drivers/target/iscsi/iscsi_target_erl1.h b/drivers/target/iscsi/iscsi_target_erl1.h
new file mode 100644
index 0000000..85e67e2
--- /dev/null
+++ b/drivers/target/iscsi/iscsi_target_erl1.h
@@ -0,0 +1,26 @@
+#ifndef ISCSI_TARGET_ERL1_H
+#define ISCSI_TARGET_ERL1_H
+
+extern int iscsit_dump_data_payload(struct iscsi_conn *, u32, int);
+extern int iscsit_create_recovery_datain_values_datasequenceinorder_yes(
+ struct iscsi_cmd *, struct iscsi_datain_req *);
+extern int iscsit_create_recovery_datain_values_datasequenceinorder_no(
+ struct iscsi_cmd *, struct iscsi_datain_req *);
+extern int iscsit_handle_recovery_datain_or_r2t(struct iscsi_conn *, unsigned char *,
+ u32, u32, u32, u32);
+extern int iscsit_handle_status_snack(struct iscsi_conn *, u32, u32,
+ u32, u32);
+extern int iscsit_handle_data_ack(struct iscsi_conn *, u32, u32, u32);
+extern int iscsit_dataout_datapduinorder_no_fbit(struct iscsi_cmd *, struct iscsi_pdu *);
+extern int iscsit_recover_dataout_sequence(struct iscsi_cmd *, u32, u32);
+extern void iscsit_clear_ooo_cmdsns_for_conn(struct iscsi_conn *);
+extern void iscsit_free_all_ooo_cmdsns(struct iscsi_session *);
+extern int iscsit_execute_ooo_cmdsns(struct iscsi_session *);
+extern int iscsit_execute_cmd(struct iscsi_cmd *, int);
+extern int iscsit_handle_ooo_cmdsn(struct iscsi_session *, struct iscsi_cmd *, u32);
+extern void iscsit_remove_ooo_cmdsn(struct iscsi_session *, struct iscsi_ooo_cmdsn *);
+extern void iscsit_mod_dataout_timer(struct iscsi_cmd *);
+extern void iscsit_start_dataout_timer(struct iscsi_cmd *, struct iscsi_conn *);
+extern void iscsit_stop_dataout_timer(struct iscsi_cmd *);
+
+#endif /* ISCSI_TARGET_ERL1_H */
diff --git a/drivers/target/iscsi/iscsi_target_erl2.c b/drivers/target/iscsi/iscsi_target_erl2.c
new file mode 100644
index 0000000..9c24873
--- /dev/null
+++ b/drivers/target/iscsi/iscsi_target_erl2.c
@@ -0,0 +1,483 @@
+/*******************************************************************************
+ * This file contains error recovery level two functions used by
+ * the iSCSI Target driver.
+ *
+ * © Copyright 2007-2011 RisingTide Systems LLC.
+ *
+ * Licensed to the Linux Foundation under the General Public License (GPL) version 2.
+ *
+ * Author: Nicholas A. Bellinger <nab@...ux-iscsi.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ ******************************************************************************/
+
+#include <scsi/iscsi_proto.h>
+#include <target/target_core_base.h>
+#include <target/target_core_transport.h>
+
+#include "iscsi_target_debug.h"
+#include "iscsi_target_core.h"
+#include "iscsi_target_datain_values.h"
+#include "iscsi_target_util.h"
+#include "iscsi_target_erl0.h"
+#include "iscsi_target_erl1.h"
+#include "iscsi_target_erl2.h"
+#include "iscsi_target.h"
+
+/*
+ * FIXME: Does RData SNACK apply here as well?
+ */
+void iscsit_create_conn_recovery_datain_values(
+ struct iscsi_cmd *cmd,
+ u32 exp_data_sn)
+{
+ u32 data_sn = 0;
+ struct iscsi_conn *conn = cmd->conn;
+
+ cmd->next_burst_len = 0;
+ cmd->read_data_done = 0;
+
+ while (exp_data_sn > data_sn) {
+ if ((cmd->next_burst_len +
+ conn->conn_ops->MaxRecvDataSegmentLength) <
+ conn->sess->sess_ops->MaxBurstLength) {
+ cmd->read_data_done +=
+ conn->conn_ops->MaxRecvDataSegmentLength;
+ cmd->next_burst_len +=
+ conn->conn_ops->MaxRecvDataSegmentLength;
+ } else {
+ cmd->read_data_done +=
+ (conn->sess->sess_ops->MaxBurstLength -
+ cmd->next_burst_len);
+ cmd->next_burst_len = 0;
+ }
+ data_sn++;
+ }
+}
+
+void iscsit_create_conn_recovery_dataout_values(
+ struct iscsi_cmd *cmd)
+{
+ u32 write_data_done = 0;
+ struct iscsi_conn *conn = cmd->conn;
+
+ cmd->data_sn = 0;
+ cmd->next_burst_len = 0;
+
+ while (cmd->write_data_done > write_data_done) {
+ if ((write_data_done + conn->sess->sess_ops->MaxBurstLength) <=
+ cmd->write_data_done)
+ write_data_done += conn->sess->sess_ops->MaxBurstLength;
+ else
+ break;
+ }
+
+ cmd->write_data_done = write_data_done;
+}
+
+static int iscsit_attach_active_connection_recovery_entry(
+ struct iscsi_session *sess,
+ struct iscsi_conn_recovery *cr)
+{
+ spin_lock(&sess->cr_a_lock);
+ list_add_tail(&cr->cr_list, &sess->cr_active_list);
+ spin_unlock(&sess->cr_a_lock);
+
+ return 0;
+}
+
+static int iscsit_attach_inactive_connection_recovery_entry(
+ struct iscsi_session *sess,
+ struct iscsi_conn_recovery *cr)
+{
+ spin_lock(&sess->cr_i_lock);
+ list_add_tail(&cr->cr_list, &sess->cr_inactive_list);
+
+ sess->conn_recovery_count++;
+ TRACE(TRACE_ERL2, "Incremented connection recovery count to %u for"
+ " SID: %u\n", sess->conn_recovery_count, sess->sid);
+ spin_unlock(&sess->cr_i_lock);
+
+ return 0;
+}
+
+struct iscsi_conn_recovery *iscsit_get_inactive_connection_recovery_entry(
+ struct iscsi_session *sess,
+ u16 cid)
+{
+ struct iscsi_conn_recovery *cr;
+
+ spin_lock(&sess->cr_i_lock);
+ list_for_each_entry(cr, &sess->cr_inactive_list, cr_list) {
+ if (cr->cid == cid) {
+ spin_unlock(&sess->cr_i_lock);
+ return cr;
+ }
+ }
+ spin_unlock(&sess->cr_i_lock);
+
+ return NULL;
+}
+
+void iscsit_free_connection_recovery_entires(struct iscsi_session *sess)
+{
+ struct iscsi_cmd *cmd, *cmd_tmp;
+ struct iscsi_conn_recovery *cr, *cr_tmp;
+
+ spin_lock(&sess->cr_a_lock);
+ list_for_each_entry_safe(cr, cr_tmp, &sess->cr_active_list, cr_list) {
+ list_del(&cr->cr_list);
+ spin_unlock(&sess->cr_a_lock);
+
+ spin_lock(&cr->conn_recovery_cmd_lock);
+ list_for_each_entry_safe(cmd, cmd_tmp,
+ &cr->conn_recovery_cmd_list, i_list) {
+
+ list_del(&cmd->i_list);
+ cmd->conn = NULL;
+ spin_unlock(&cr->conn_recovery_cmd_lock);
+ if (!(SE_CMD(cmd)) ||
+ !(SE_CMD(cmd)->se_cmd_flags & SCF_SE_LUN_CMD) ||
+ !(SE_CMD(cmd)->transport_wait_for_tasks))
+ iscsit_release_cmd(cmd);
+ else
+ SE_CMD(cmd)->transport_wait_for_tasks(
+ SE_CMD(cmd), 1, 1);
+ spin_lock(&cr->conn_recovery_cmd_lock);
+ }
+ spin_unlock(&cr->conn_recovery_cmd_lock);
+ spin_lock(&sess->cr_a_lock);
+
+ kfree(cr);
+ }
+ spin_unlock(&sess->cr_a_lock);
+
+ spin_lock(&sess->cr_i_lock);
+ list_for_each_entry_safe(cr, cr_tmp, &sess->cr_inactive_list, cr_list) {
+ list_del(&cr->cr_list);
+ spin_unlock(&sess->cr_i_lock);
+
+ spin_lock(&cr->conn_recovery_cmd_lock);
+ list_for_each_entry_safe(cmd, cmd_tmp,
+ &cr->conn_recovery_cmd_list, i_list) {
+
+ list_del(&cmd->i_list);
+ cmd->conn = NULL;
+ spin_unlock(&cr->conn_recovery_cmd_lock);
+ if (!(SE_CMD(cmd)) ||
+ !(SE_CMD(cmd)->se_cmd_flags & SCF_SE_LUN_CMD) ||
+ !(SE_CMD(cmd)->transport_wait_for_tasks))
+ iscsit_release_cmd(cmd);
+ else
+ SE_CMD(cmd)->transport_wait_for_tasks(
+ SE_CMD(cmd), 1, 1);
+ spin_lock(&cr->conn_recovery_cmd_lock);
+ }
+ spin_unlock(&cr->conn_recovery_cmd_lock);
+ spin_lock(&sess->cr_i_lock);
+
+ kfree(cr);
+ }
+ spin_unlock(&sess->cr_i_lock);
+}
+
+int iscsit_remove_active_connection_recovery_entry(
+ struct iscsi_conn_recovery *cr,
+ struct iscsi_session *sess)
+{
+ spin_lock(&sess->cr_a_lock);
+ list_del(&cr->cr_list);
+
+ sess->conn_recovery_count--;
+ TRACE(TRACE_ERL2, "Decremented connection recovery count to %u for"
+ " SID: %u\n", sess->conn_recovery_count, sess->sid);
+ spin_unlock(&sess->cr_a_lock);
+
+ kfree(cr);
+
+ return 0;
+}
+
+int iscsit_remove_inactive_connection_recovery_entry(
+ struct iscsi_conn_recovery *cr,
+ struct iscsi_session *sess)
+{
+ spin_lock(&sess->cr_i_lock);
+ list_del(&cr->cr_list);
+ spin_unlock(&sess->cr_i_lock);
+
+ return 0;
+}
+
+/*
+ * Called with cr->conn_recovery_cmd_lock help.
+ */
+int iscsit_remove_cmd_from_connection_recovery(
+ struct iscsi_cmd *cmd,
+ struct iscsi_session *sess)
+{
+ struct iscsi_conn_recovery *cr;
+
+ if (!cmd->cr) {
+ printk(KERN_ERR "struct iscsi_conn_recovery pointer for ITT: 0x%08x"
+ " is NULL!\n", cmd->init_task_tag);
+ BUG();
+ }
+ cr = cmd->cr;
+
+ list_del(&cmd->i_list);
+ return --cr->cmd_count;
+}
+
+void iscsit_discard_cr_cmds_by_expstatsn(
+ struct iscsi_conn_recovery *cr,
+ u32 exp_statsn)
+{
+ u32 dropped_count = 0;
+ struct iscsi_cmd *cmd, *cmd_tmp;
+ struct iscsi_session *sess = cr->sess;
+
+ spin_lock(&cr->conn_recovery_cmd_lock);
+ list_for_each_entry_safe(cmd, cmd_tmp,
+ &cr->conn_recovery_cmd_list, i_list) {
+
+ if (((cmd->deferred_i_state != ISTATE_SENT_STATUS) &&
+ (cmd->deferred_i_state != ISTATE_REMOVE)) ||
+ (cmd->stat_sn >= exp_statsn)) {
+ continue;
+ }
+
+ dropped_count++;
+ TRACE(TRACE_ERL2, "Dropping Acknowledged ITT: 0x%08x, StatSN:"
+ " 0x%08x, CID: %hu.\n", cmd->init_task_tag,
+ cmd->stat_sn, cr->cid);
+
+ iscsit_remove_cmd_from_connection_recovery(cmd, sess);
+
+ spin_unlock(&cr->conn_recovery_cmd_lock);
+ if (!(SE_CMD(cmd)) ||
+ !(SE_CMD(cmd)->se_cmd_flags & SCF_SE_LUN_CMD) ||
+ !(SE_CMD(cmd)->transport_wait_for_tasks))
+ iscsit_release_cmd(cmd);
+ else
+ SE_CMD(cmd)->transport_wait_for_tasks(
+ SE_CMD(cmd), 1, 0);
+ spin_lock(&cr->conn_recovery_cmd_lock);
+ }
+ spin_unlock(&cr->conn_recovery_cmd_lock);
+
+ TRACE(TRACE_ERL2, "Dropped %u total acknowledged commands on"
+ " CID: %hu less than old ExpStatSN: 0x%08x\n",
+ dropped_count, cr->cid, exp_statsn);
+
+ if (!cr->cmd_count) {
+ TRACE(TRACE_ERL2, "No commands to be reassigned for failed"
+ " connection CID: %hu on SID: %u\n",
+ cr->cid, sess->sid);
+ iscsit_remove_inactive_connection_recovery_entry(cr, sess);
+ iscsit_attach_active_connection_recovery_entry(sess, cr);
+ printk(KERN_INFO "iSCSI connection recovery successful for CID:"
+ " %hu on SID: %u\n", cr->cid, sess->sid);
+ iscsit_remove_active_connection_recovery_entry(cr, sess);
+ } else {
+ iscsit_remove_inactive_connection_recovery_entry(cr, sess);
+ iscsit_attach_active_connection_recovery_entry(sess, cr);
+ }
+}
+
+int iscsit_discard_unacknowledged_ooo_cmdsns_for_conn(struct iscsi_conn *conn)
+{
+ u32 dropped_count = 0;
+ struct iscsi_cmd *cmd, *cmd_tmp;
+ struct iscsi_ooo_cmdsn *ooo_cmdsn, *ooo_cmdsn_tmp;
+ struct iscsi_session *sess = conn->sess;
+
+ spin_lock(&sess->cmdsn_lock);
+ list_for_each_entry_safe(ooo_cmdsn, ooo_cmdsn_tmp,
+ &sess->sess_ooo_cmdsn_list, ooo_list) {
+
+ if (ooo_cmdsn->cid != conn->cid)
+ continue;
+
+ dropped_count++;
+ TRACE(TRACE_ERL2, "Dropping unacknowledged CmdSN:"
+ " 0x%08x during connection recovery on CID: %hu\n",
+ ooo_cmdsn->cmdsn, conn->cid);
+ iscsit_remove_ooo_cmdsn(sess, ooo_cmdsn);
+ }
+ conn->sess->ooo_cmdsn_count -= dropped_count;
+ spin_unlock(&sess->cmdsn_lock);
+
+ spin_lock_bh(&conn->cmd_lock);
+ list_for_each_entry_safe(cmd, cmd_tmp, &conn->conn_cmd_list, i_list) {
+ if (!(cmd->cmd_flags & ICF_OOO_CMDSN))
+ continue;
+
+ list_del(&cmd->i_list);
+
+ spin_unlock_bh(&conn->cmd_lock);
+ if (!(SE_CMD(cmd)) ||
+ !(SE_CMD(cmd)->se_cmd_flags & SCF_SE_LUN_CMD) ||
+ !(SE_CMD(cmd)->transport_wait_for_tasks))
+ iscsit_release_cmd(cmd);
+ else
+ SE_CMD(cmd)->transport_wait_for_tasks(
+ SE_CMD(cmd), 1, 1);
+ spin_lock_bh(&conn->cmd_lock);
+ }
+ spin_unlock_bh(&conn->cmd_lock);
+
+ TRACE(TRACE_ERL2, "Dropped %u total unacknowledged commands on CID:"
+ " %hu for ExpCmdSN: 0x%08x.\n", dropped_count, conn->cid,
+ sess->exp_cmd_sn);
+ return 0;
+}
+
+int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn)
+{
+ u32 cmd_count = 0;
+ struct iscsi_cmd *cmd, *cmd_tmp;
+ struct iscsi_conn_recovery *cr;
+
+ /*
+ * Allocate an struct iscsi_conn_recovery for this connection.
+ * Each struct iscsi_cmd contains an struct iscsi_conn_recovery pointer
+ * (struct iscsi_cmd->cr) so we need to allocate this before preparing the
+ * connection's command list for connection recovery.
+ */
+ cr = kzalloc(sizeof(struct iscsi_conn_recovery), GFP_KERNEL);
+ if (!cr) {
+ printk(KERN_ERR "Unable to allocate memory for"
+ " struct iscsi_conn_recovery.\n");
+ return -1;
+ }
+ INIT_LIST_HEAD(&cr->cr_list);
+ INIT_LIST_HEAD(&cr->conn_recovery_cmd_list);
+ spin_lock_init(&cr->conn_recovery_cmd_lock);
+ /*
+ * Only perform connection recovery on ISCSI_OP_SCSI_CMD or
+ * ISCSI_OP_NOOP_OUT opcodes. For all other opcodes call
+ * list_del(&cmd->i_list); to release the command to the
+ * session pool and remove it from the connection's list.
+ *
+ * Also stop the DataOUT timer, which will be restarted after
+ * sending the TMR response.
+ */
+ spin_lock_bh(&conn->cmd_lock);
+ list_for_each_entry_safe(cmd, cmd_tmp, &conn->conn_cmd_list, i_list) {
+
+ if ((cmd->iscsi_opcode != ISCSI_OP_SCSI_CMD) &&
+ (cmd->iscsi_opcode != ISCSI_OP_NOOP_OUT)) {
+ TRACE(TRACE_ERL2, "Not performing realligence on"
+ " Opcode: 0x%02x, ITT: 0x%08x, CmdSN: 0x%08x,"
+ " CID: %hu\n", cmd->iscsi_opcode,
+ cmd->init_task_tag, cmd->cmd_sn, conn->cid);
+
+ list_del(&cmd->i_list);
+ spin_unlock_bh(&conn->cmd_lock);
+
+ if (!(SE_CMD(cmd)) ||
+ !(SE_CMD(cmd)->se_cmd_flags & SCF_SE_LUN_CMD) ||
+ !(SE_CMD(cmd)->transport_wait_for_tasks))
+ iscsit_release_cmd(cmd);
+ else
+ SE_CMD(cmd)->transport_wait_for_tasks(
+ SE_CMD(cmd), 1, 0);
+ spin_lock_bh(&conn->cmd_lock);
+ continue;
+ }
+
+ /*
+ * Special case where commands greater than or equal to
+ * the session's ExpCmdSN are attached to the connection
+ * list but not to the out of order CmdSN list. The one
+ * obvious case is when a command with immediate data
+ * attached must only check the CmdSN against ExpCmdSN
+ * after the data is received. The special case below
+ * is when the connection fails before data is received,
+ * but also may apply to other PDUs, so it has been
+ * made generic here.
+ */
+ if (!(cmd->cmd_flags & ICF_OOO_CMDSN) && !cmd->immediate_cmd &&
+ (cmd->cmd_sn >= conn->sess->exp_cmd_sn)) {
+ list_del(&cmd->i_list);
+ spin_unlock_bh(&conn->cmd_lock);
+
+ if (!(SE_CMD(cmd)) ||
+ !(SE_CMD(cmd)->se_cmd_flags & SCF_SE_LUN_CMD) ||
+ !(SE_CMD(cmd)->transport_wait_for_tasks))
+ iscsit_release_cmd(cmd);
+ else
+ SE_CMD(cmd)->transport_wait_for_tasks(
+ SE_CMD(cmd), 1, 1);
+ spin_lock_bh(&conn->cmd_lock);
+ continue;
+ }
+
+ cmd_count++;
+ TRACE(TRACE_ERL2, "Preparing Opcode: 0x%02x, ITT: 0x%08x,"
+ " CmdSN: 0x%08x, StatSN: 0x%08x, CID: %hu for"
+ " realligence.\n", cmd->iscsi_opcode,
+ cmd->init_task_tag, cmd->cmd_sn, cmd->stat_sn,
+ conn->cid);
+
+ cmd->deferred_i_state = cmd->i_state;
+ cmd->i_state = ISTATE_IN_CONNECTION_RECOVERY;
+
+ if (cmd->data_direction == DMA_TO_DEVICE)
+ iscsit_stop_dataout_timer(cmd);
+
+ cmd->sess = conn->sess;
+
+ list_del(&cmd->i_list);
+ spin_unlock_bh(&conn->cmd_lock);
+
+ iscsit_free_all_datain_reqs(cmd);
+
+ if ((SE_CMD(cmd)) &&
+ (SE_CMD(cmd)->se_cmd_flags & SCF_SE_LUN_CMD) &&
+ SE_CMD(cmd)->transport_wait_for_tasks)
+ SE_CMD(cmd)->transport_wait_for_tasks(SE_CMD(cmd),
+ 0, 0);
+ /*
+ * Add the struct iscsi_cmd to the connection recovery cmd list
+ */
+ spin_lock(&cr->conn_recovery_cmd_lock);
+ list_add_tail(&cmd->i_list, &cr->conn_recovery_cmd_list);
+ spin_unlock(&cr->conn_recovery_cmd_lock);
+
+ spin_lock_bh(&conn->cmd_lock);
+ cmd->cr = cr;
+ cmd->conn = NULL;
+ }
+ spin_unlock_bh(&conn->cmd_lock);
+ /*
+ * Fill in the various values in the preallocated struct iscsi_conn_recovery.
+ */
+ cr->cid = conn->cid;
+ cr->cmd_count = cmd_count;
+ cr->maxrecvdatasegmentlength = conn->conn_ops->MaxRecvDataSegmentLength;
+ cr->sess = conn->sess;
+
+ iscsit_attach_inactive_connection_recovery_entry(conn->sess, cr);
+
+ return 0;
+}
+
+int iscsit_connection_recovery_transport_reset(struct iscsi_conn *conn)
+{
+ atomic_set(&conn->connection_recovery, 1);
+
+ if (iscsit_close_connection(conn) < 0)
+ return -1;
+
+ return 0;
+}
diff --git a/drivers/target/iscsi/iscsi_target_erl2.h b/drivers/target/iscsi/iscsi_target_erl2.h
new file mode 100644
index 0000000..22f8d24
--- /dev/null
+++ b/drivers/target/iscsi/iscsi_target_erl2.h
@@ -0,0 +1,18 @@
+#ifndef ISCSI_TARGET_ERL2_H
+#define ISCSI_TARGET_ERL2_H
+
+extern void iscsit_create_conn_recovery_datain_values(struct iscsi_cmd *, u32);
+extern void iscsit_create_conn_recovery_dataout_values(struct iscsi_cmd *);
+extern struct iscsi_conn_recovery *iscsit_get_inactive_connection_recovery_entry(
+ struct iscsi_session *, u16);
+extern void iscsit_free_connection_recovery_entires(struct iscsi_session *);
+extern int iscsit_remove_active_connection_recovery_entry(
+ struct iscsi_conn_recovery *, struct iscsi_session *);
+extern int iscsit_remove_cmd_from_connection_recovery(struct iscsi_cmd *,
+ struct iscsi_session *);
+extern void iscsit_discard_cr_cmds_by_expstatsn(struct iscsi_conn_recovery *, u32);
+extern int iscsit_discard_unacknowledged_ooo_cmdsns_for_conn(struct iscsi_conn *);
+extern int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *);
+extern int iscsit_connection_recovery_transport_reset(struct iscsi_conn *);
+
+#endif /*** ISCSI_TARGET_ERL2_H ***/
--
1.7.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists