| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 24 May 2011 22:28:31 +0800
From: yxlraid@...il.com
To: James.Bottomley@...e.de
Cc: jslaby@...e.cz, linux-scsi@...r.kernel.org,
linux-kernel@...r.kernel.org, yuxiangl@...vell.com,
jfeng@...vell.com
Subject: [PATCH 2/9] [SCSI] mvsas: add support for 94xx phy tuning and multiple revisions
From: Xiangliang Yu <yuxiangl@...vell.com>
-- Add 94xx phy tuning to aid manufacturing.
-- Add support for 94xx multiple revisions: A0, B0, C0, C1, C2.
Signed-off-by: Xiangliang Yu <yuxiangl@...vell.com>
---
drivers/scsi/mvsas/mv_94xx.c | 267 +++++++++++++++++++++++++++++++++++++++---
drivers/scsi/mvsas/mv_94xx.h | 58 +++++++++
drivers/scsi/mvsas/mv_init.c | 3 +
drivers/scsi/mvsas/mv_sas.h | 68 +++++++++++
4 files changed, 382 insertions(+), 14 deletions(-)
diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
index 9d60c7c..3f2ad93 100644
--- a/drivers/scsi/mvsas/mv_94xx.c
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -48,6 +48,216 @@ static void mvs_94xx_detect_porttype(struct mvs_info *mvi, int i)
}
}
+void set_phy_tuning(struct mvs_info *mvi, int phy_id,
+ struct phy_tuning phy_tuning)
+{
+ u32 tmp, setting_0 = 0, setting_1 = 0;
+ u8 i;
+
+ /* Remap information for B0 chip:
+ *
+ * R0Ch -> R118h[15:0] (Adapted DFE F3 - F5 coefficient)
+ * R0Dh -> R118h[31:16] (Generation 1 Setting 0)
+ * R0Eh -> R11Ch[15:0] (Generation 1 Setting 1)
+ * R0Fh -> R11Ch[31:16] (Generation 2 Setting 0)
+ * R10h -> R120h[15:0] (Generation 2 Setting 1)
+ * R11h -> R120h[31:16] (Generation 3 Setting 0)
+ * R12h -> R124h[15:0] (Generation 3 Setting 1)
+ * R13h -> R124h[31:16] (Generation 4 Setting 0 (Reserved))
+ */
+
+ /* A0 has a different set of registers */
+ if (mvi->pdev->revision == VANIR_A0_REV)
+ return;
+
+ for (i = 0; i < 3; i++) {
+ /* loop 3 times, set Gen 1, Gen 2, Gen 3 */
+ switch (i) {
+ case 0:
+ setting_0 = GENERATION_1_SETTING;
+ setting_1 = GENERATION_1_2_SETTING;
+ break;
+ case 1:
+ setting_0 = GENERATION_1_2_SETTING;
+ setting_1 = GENERATION_2_3_SETTING;
+ break;
+ case 2:
+ setting_0 = GENERATION_2_3_SETTING;
+ setting_1 = GENERATION_3_4_SETTING;
+ break;
+ }
+
+ /* Set:
+ *
+ * Transmitter Emphasis Enable
+ * Transmitter Emphasis Amplitude
+ * Transmitter Amplitude
+ */
+ mvs_write_port_vsr_addr(mvi, phy_id, setting_0);
+ tmp = mvs_read_port_vsr_data(mvi, phy_id);
+ tmp &= ~(0xFBE << 16);
+ tmp |= (((phy_tuning.trans_emp_en << 11) |
+ (phy_tuning.trans_emp_amp << 7) |
+ (phy_tuning.trans_amp << 1)) << 16);
+ mvs_write_port_vsr_data(mvi, phy_id, tmp);
+
+ /* Set Transmitter Amplitude Adjust */
+ mvs_write_port_vsr_addr(mvi, phy_id, setting_1);
+ tmp = mvs_read_port_vsr_data(mvi, phy_id);
+ tmp &= ~(0xC000);
+ tmp |= (phy_tuning.trans_amp_adj << 14);
+ mvs_write_port_vsr_data(mvi, phy_id, tmp);
+ }
+}
+
+void set_phy_ffe_tuning(struct mvs_info *mvi, int phy_id,
+ struct ffe_control ffe)
+{
+ u32 tmp;
+
+ /* Don't run this if A0/B0 */
+ if ((mvi->pdev->revision == VANIR_A0_REV)
+ || (mvi->pdev->revision == VANIR_B0_REV))
+ return;
+
+ /* FFE Resistor and Capacitor */
+ /* R10Ch DFE Resolution Control/Squelch and FFE Setting
+ *
+ * FFE_FORCE [7]
+ * FFE_RES_SEL [6:4]
+ * FFE_CAP_SEL [3:0]
+ */
+ mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_FFE_CONTROL);
+ tmp = mvs_read_port_vsr_data(mvi, phy_id);
+ tmp &= ~0xFF;
+
+ /* Read from HBA_Info_Page */
+ tmp |= ((0x1 << 7) |
+ (ffe.ffe_rss_sel << 4) |
+ (ffe.ffe_cap_sel << 0));
+
+ mvs_write_port_vsr_data(mvi, phy_id, tmp);
+
+ /* R064h PHY Mode Register 1
+ *
+ * DFE_DIS 18
+ */
+ mvs_write_port_vsr_addr(mvi, phy_id, VSR_REF_CLOCK_CRTL);
+ tmp = mvs_read_port_vsr_data(mvi, phy_id);
+ tmp &= ~0x40001;
+ /* Hard coding */
+ /* No defines in HBA_Info_Page */
+ tmp |= (0 << 18);
+ mvs_write_port_vsr_data(mvi, phy_id, tmp);
+
+ /* R110h DFE F0-F1 Coefficient Control/DFE Update Control
+ *
+ * DFE_UPDATE_EN [11:6]
+ * DFE_FX_FORCE [5:0]
+ */
+ mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_DFE_UPDATE_CRTL);
+ tmp = mvs_read_port_vsr_data(mvi, phy_id);
+ tmp &= ~0xFFF;
+ /* Hard coding */
+ /* No defines in HBA_Info_Page */
+ tmp |= ((0x3F << 6) | (0x0 << 0));
+ mvs_write_port_vsr_data(mvi, phy_id, tmp);
+
+ /* R1A0h Interface and Digital Reference Clock Control/Reserved_50h
+ *
+ * FFE_TRAIN_EN 3
+ */
+ mvs_write_port_vsr_addr(mvi, phy_id, VSR_REF_CLOCK_CRTL);
+ tmp = mvs_read_port_vsr_data(mvi, phy_id);
+ tmp &= ~0x8;
+ /* Hard coding */
+ /* No defines in HBA_Info_Page */
+ tmp |= (0 << 3);
+ mvs_write_port_vsr_data(mvi, phy_id, tmp);
+}
+
+/*Notice: this function must be called when phy is disabled*/
+void set_phy_rate(struct mvs_info *mvi, int phy_id, u8 rate)
+{
+ union reg_phy_cfg phy_cfg, phy_cfg_tmp;
+ mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
+ phy_cfg_tmp.v = mvs_read_port_vsr_data(mvi, phy_id);
+ phy_cfg.v = 0;
+ phy_cfg.u.disable_phy = phy_cfg_tmp.u.disable_phy;
+ phy_cfg.u.sas_support = 1;
+ phy_cfg.u.sata_support = 1;
+ phy_cfg.u.sata_host_mode = 1;
+
+ switch (rate) {
+ case 0x0:
+ /* support 1.5 Gbps */
+ phy_cfg.u.speed_support = 1;
+ phy_cfg.u.snw_3_support = 0;
+ phy_cfg.u.tx_lnk_parity = 1;
+ phy_cfg.u.tx_spt_phs_lnk_rate = 0x30;
+ break;
+ case 0x1:
+
+ /* support 1.5, 3.0 Gbps */
+ phy_cfg.u.speed_support = 3;
+ phy_cfg.u.tx_spt_phs_lnk_rate = 0x3c;
+ phy_cfg.u.tx_lgcl_lnk_rate = 0x08;
+ break;
+ case 0x2:
+ default:
+ /* support 1.5, 3.0, 6.0 Gbps */
+ phy_cfg.u.speed_support = 7;
+ phy_cfg.u.snw_3_support = 1;
+ phy_cfg.u.tx_lnk_parity = 1;
+ phy_cfg.u.tx_spt_phs_lnk_rate = 0x3f;
+ phy_cfg.u.tx_lgcl_lnk_rate = 0x09;
+ break;
+ }
+ mvs_write_port_vsr_data(mvi, phy_id, phy_cfg.v);
+}
+
+static void __devinit
+mvs_94xx_config_reg_from_hba(struct mvs_info *mvi, int phy_id)
+{
+ u32 temp;
+ temp = (u32)(*(u32 *)&mvi->hba_info_param.phy_tuning[phy_id]);
+ if (temp == 0xFFFFFFFFL) {
+ mvi->hba_info_param.phy_tuning[phy_id].trans_emp_amp = 0x6;
+ mvi->hba_info_param.phy_tuning[phy_id].trans_amp = 0x1A;
+ mvi->hba_info_param.phy_tuning[phy_id].trans_amp_adj = 0x3;
+ }
+
+ temp = (u8)(*(u8 *)&mvi->hba_info_param.ffe_ctl[phy_id]);
+ if (temp == 0xFFL) {
+ switch (mvi->pdev->revision) {
+ case VANIR_A0_REV:
+ case VANIR_B0_REV:
+ mvi->hba_info_param.ffe_ctl[phy_id].ffe_rss_sel = 0x7;
+ mvi->hba_info_param.ffe_ctl[phy_id].ffe_cap_sel = 0x7;
+ break;
+ case VANIR_C0_REV:
+ case VANIR_C1_REV:
+ case VANIR_C2_REV:
+ default:
+ mvi->hba_info_param.ffe_ctl[phy_id].ffe_rss_sel = 0x7;
+ mvi->hba_info_param.ffe_ctl[phy_id].ffe_cap_sel = 0xC;
+ break;
+ }
+ }
+
+ temp = (u8)(*(u8 *)&mvi->hba_info_param.phy_rate[phy_id]);
+ if (temp == 0xFFL)
+ /*set default phy_rate = 6Gbps*/
+ mvi->hba_info_param.phy_rate[phy_id] = 0x2;
+
+ set_phy_tuning(mvi, phy_id,
+ mvi->hba_info_param.phy_tuning[phy_id]);
+ set_phy_ffe_tuning(mvi, phy_id,
+ mvi->hba_info_param.ffe_ctl[phy_id]);
+ set_phy_rate(mvi, phy_id,
+ mvi->hba_info_param.phy_rate[phy_id]);
+}
+
static void __devinit mvs_94xx_enable_xmt(struct mvs_info *mvi, int phy_id)
{
void __iomem *regs = mvi->regs;
@@ -90,12 +300,25 @@ static void mvs_94xx_phy_disable(struct mvs_info *mvi, u32 phy_id)
static void mvs_94xx_phy_enable(struct mvs_info *mvi, u32 phy_id)
{
- mvs_write_port_vsr_addr(mvi, phy_id, 0x1B4);
- mvs_write_port_vsr_data(mvi, phy_id, 0x8300ffc1);
- mvs_write_port_vsr_addr(mvi, phy_id, 0x104);
- mvs_write_port_vsr_data(mvi, phy_id, 0x00018080);
+ u32 tmp;
+ u8 revision = 0;
+
+ revision = mvi->pdev->revision;
+ if (revision == VANIR_A0_REV) {
+ mvs_write_port_vsr_addr(mvi, phy_id, CMD_HOST_RD_DATA);
+ mvs_write_port_vsr_data(mvi, phy_id, 0x8300ffc1);
+ }
+ if (revision == VANIR_B0_REV) {
+ mvs_write_port_vsr_addr(mvi, phy_id, CMD_APP_MEM_CTL);
+ mvs_write_port_vsr_data(mvi, phy_id, 0x08001006);
+ mvs_write_port_vsr_addr(mvi, phy_id, CMD_HOST_RD_DATA);
+ mvs_write_port_vsr_data(mvi, phy_id, 0x0000705f);
+ }
+
mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
- mvs_write_port_vsr_data(mvi, phy_id, 0x00207fff);
+ tmp = mvs_read_port_vsr_data(mvi, phy_id);
+ tmp |= bit(0);
+ mvs_write_port_vsr_data(mvi, phy_id, tmp & 0xfd7fffff);
}
static int __devinit mvs_94xx_init(struct mvs_info *mvi)
@@ -103,7 +326,9 @@ static int __devinit mvs_94xx_init(struct mvs_info *mvi)
void __iomem *regs = mvi->regs;
int i;
u32 tmp, cctl;
+ u8 revision;
+ revision = mvi->pdev->revision;
mvs_show_pcie_usage(mvi);
if (mvi->flags & MVF_FLAG_SOC) {
tmp = mr32(MVS_PHY_CTL);
@@ -133,6 +358,28 @@ static int __devinit mvs_94xx_init(struct mvs_info *mvi)
msleep(100);
}
+ /* disable Multiplexing, enable phy implemented */
+ mw32(MVS_PORTS_IMP, 0xFF);
+
+ if (revision == VANIR_A0_REV) {
+ mw32(MVS_PA_VSR_ADDR, CMD_CMWK_OOB_DET);
+ mw32(MVS_PA_VSR_PORT, 0x00018080);
+ }
+ mw32(MVS_PA_VSR_ADDR, VSR_PHY_MODE2);
+ if (revision == VANIR_A0_REV || revision == VANIR_B0_REV)
+ /* set 6G/3G/1.5G, multiplexing, without SSC */
+ mw32(MVS_PA_VSR_PORT, 0x0084d4fe);
+ else
+ /* set 6G/3G/1.5G, multiplexing, with and without SSC */
+ mw32(MVS_PA_VSR_PORT, 0x0084fffe);
+
+ if (revision == VANIR_B0_REV) {
+ mw32(MVS_PA_VSR_ADDR, CMD_APP_MEM_CTL);
+ mw32(MVS_PA_VSR_PORT, 0x08001006);
+ mw32(MVS_PA_VSR_ADDR, CMD_HOST_RD_DATA);
+ mw32(MVS_PA_VSR_PORT, 0x0000705f);
+ }
+
/* reset control */
mw32(MVS_PCS, 0); /* MVS_PCS */
mw32(MVS_STP_REG_SET_0, 0);
@@ -141,15 +388,6 @@ static int __devinit mvs_94xx_init(struct mvs_info *mvi)
/* init phys */
mvs_phy_hacks(mvi);
- /* disable Multiplexing, enable phy implemented */
- mw32(MVS_PORTS_IMP, 0xFF);
-
-
- mw32(MVS_PA_VSR_ADDR, 0x00000104);
- mw32(MVS_PA_VSR_PORT, 0x00018080);
- mw32(MVS_PA_VSR_ADDR, VSR_PHY_MODE8);
- mw32(MVS_PA_VSR_PORT, 0x0084ffff);
-
/* set LED blink when IO*/
mw32(MVS_PA_VSR_ADDR, 0x00000030);
tmp = mr32(MVS_PA_VSR_PORT);
@@ -178,6 +416,7 @@ static int __devinit mvs_94xx_init(struct mvs_info *mvi)
(mvi->phy[i].dev_sas_addr));
mvs_94xx_enable_xmt(mvi, i);
+ mvs_94xx_config_reg_from_hba(mvi, i);
mvs_94xx_phy_enable(mvi, i);
mvs_94xx_phy_reset(mvi, i, 1);
diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
index 8835bef..e71ae11 100644
--- a/drivers/scsi/mvsas/mv_94xx.h
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -30,6 +30,14 @@
#define MAX_LINK_RATE SAS_LINK_RATE_6_0_GBPS
+enum VANIR_REVISION_ID {
+ VANIR_A0_REV = 0xA0,
+ VANIR_B0_REV = 0x01,
+ VANIR_C0_REV = 0x02,
+ VANIR_C1_REV = 0x03,
+ VANIR_C2_REV = 0xC2,
+};
+
enum hw_registers {
MVS_GBL_CTL = 0x04, /* global control */
MVS_GBL_INT_STAT = 0x00, /* global irq status */
@@ -126,6 +134,10 @@ enum sas_sata_vsp_regs {
VSR_PHY_MODE11 = 0x0B * 4, /* Phy Mode */
VSR_PHY_VS0 = 0x0C * 4, /* Vednor Specific 0 */
VSR_PHY_VS1 = 0x0D * 4, /* Vednor Specific 1 */
+
+ VSR_PHY_FFE_CONTROL = 0x10C,
+ VSR_PHY_DFE_UPDATE_CRTL = 0x110,
+ VSR_REF_CLOCK_CRTL = 0x1A0,
};
enum chip_register_bits {
@@ -169,6 +181,41 @@ enum pci_interrupt_cause {
IRQ_PCIE_ERR = (1 << 31),
};
+union reg_phy_cfg{
+ u32 v;
+ struct {
+ u32 phy_reset:1;
+ u32 sas_support:1;
+ u32 sata_support:1;
+ u32 sata_host_mode:1;
+ /*
+ * bit 2: 6Gbps support
+ * bit 1: 3Gbps support
+ * bit 0: 1.5Gbps support
+ */
+ u32 speed_support:3;
+ u32 snw_3_support:1;
+ u32 tx_lnk_parity:1;
+ /*
+ * bit 5: G1 (1.5Gbps) Without SSC
+ * bit 4: G1 (1.5Gbps) with SSC
+ * bit 3: G2 (3.0Gbps) Without SSC
+ * bit 2: G2 (3.0Gbps) with SSC
+ * bit 1: G3 (6.0Gbps) without SSC
+ * bit 0: G3 (6.0Gbps) with SSC
+ */
+ u32 tx_spt_phs_lnk_rate:6;
+ /* 8h: 1.5Gbps 9h: 3Gbps Ah: 6Gbps */
+ u32 tx_lgcl_lnk_rate:4;
+ u32 tx_ssc_type:1;
+ u32 sata_spin_up_spt:1;
+ u32 sata_spin_up_en:1;
+ u32 bypass_oob:1;
+ u32 disable_phy:1;
+ u32 rsvd:8;
+ } u;
+};
+
#define MAX_SG_ENTRY 255
struct mvs_prd_imt {
@@ -185,6 +232,17 @@ struct mvs_prd {
struct mvs_prd_imt im_len;
} __attribute__ ((packed));
+/*
+ * these registers are accessed through port vendor
+ * specific address/data registers
+ */
+enum sas_sata_phy_regs {
+ GENERATION_1_SETTING = 0x118,
+ GENERATION_1_2_SETTING = 0x11C,
+ GENERATION_2_3_SETTING = 0x120,
+ GENERATION_3_4_SETTING = 0x124,
+};
+
#define SPI_CTRL_REG_94XX 0xc800
#define SPI_ADDR_REG_94XX 0xc804
#define SPI_WR_DATA_REG_94XX 0xc808
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 90b6366..9f1cccc 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -569,6 +569,9 @@ static int __devinit mvs_pci_init(struct pci_dev *pdev,
goto err_out_regions;
}
+ memset(&mvi->hba_info_param, 0xFF,
+ sizeof(struct hba_info_page));
+
mvs_init_sas_add(mvi);
mvi->instance = nhost;
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index f96100d..8740b78 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -250,6 +250,73 @@ struct mvs_device {
u16 reserved;
};
+/* Generate PHY tunning parameters */
+struct phy_tuning {
+ /* 1 bit, transmitter emphasis enable */
+ u8 trans_emp_en:1;
+ /* 4 bits, transmitter emphasis amplitude */
+ u8 trans_emp_amp:4;
+ /* 3 bits, reserved space */
+ u8 Reserved_2bit_1:3;
+ /* 5 bits, transmitter amplitude */
+ u8 trans_amp:5;
+ /* 2 bits, transmitter amplitude adjust */
+ u8 trans_amp_adj:2;
+ /* 1 bit, reserved space */
+ u8 resv_2bit_2:1;
+ /* 2 bytes, reserved space */
+ u8 reserved[2];
+};
+
+struct ffe_control {
+ /* 4 bits, FFE Capacitor Select (value range 0~F) */
+ u8 ffe_cap_sel:4;
+ /* 3 bits, FFE Resistor Select (value range 0~7) */
+ u8 ffe_rss_sel:3;
+ /* 1 bit reserve*/
+ u8 reserved:1;
+};
+
+/*
+ * HBA_Info_Page is saved in Flash/NVRAM, total 256 bytes.
+ * The data area is valid only Signature="MRVL".
+ * If any member fills with 0xFF, the member is invalid.
+ */
+struct hba_info_page{
+ /* Dword 0 */
+ /* 4 bytes, structure signature,should be "MRVL" at first initial */
+ u8 signature[4];
+
+ /* Dword 1-13 */
+ u32 reserved1[13];
+
+ /* Dword 14-29 */
+ /* 64 bytes, SAS address for each port */
+ u64 sas_addr[8];
+
+ /* Dword 30-31 */
+ /* 8 bytes for vanir 8 port PHY FFE seeting
+ * BIT 0~3 : FFE Capacitor select(value range 0~F)
+ * BIT 4~6 : FFE Resistor select(value range 0~7)
+ * BIT 7: reserve.
+ */
+
+ struct ffe_control ffe_ctl[8];
+ /* Dword 32 -43 */
+ u32 reserved2[12];
+
+ /* Dword 44-45 */
+ /* 8 bytes, 0: 1.5G, 1: 3.0G, should be 0x01 at first initial */
+ u8 phy_rate[8];
+
+ /* Dword 46-53 */
+ /* 32 bytes, PHY tuning parameters for each PHY*/
+ struct phy_tuning phy_tuning[8];
+
+ /* Dword 54-63 */
+ u32 reserved3[10];
+}; /* total 256 bytes */
+
struct mvs_slot_info {
struct list_head entry;
union {
@@ -338,6 +405,7 @@ struct mvs_info {
u32 flashsectSize;
void *addon;
+ struct hba_info_page hba_info_param;
struct mvs_device devices[MVS_MAX_DEVICES];
#ifndef DISABLE_HOTPLUG_DMA_FIX
void *bulk_buffer;
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists