| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <556924396ee34f4af94a2f03767973f1cec35e22.1306408804.git.gxt@mprc.pku.edu.cn>
Date: Thu, 26 May 2011 11:36:54 +0000
From: GuanXuetao <gxt@...c.pku.edu.cn>
To: arnd@...db.de
Cc: Guan Xuetao <gxt@...c.pku.edu.cn>, linux-kernel@...r.kernel.org,
linux-arch@...r.kernel.org, greg@...ah.com, netdev@...r.kernel.org
Subject: [PATCH 2/6] unicore32: add pkunity-v3 mac/net driver (umal)
From: Guan Xuetao <gxt@...c.pku.edu.cn>
Signed-off-by: Guan Xuetao <gxt@...c.pku.edu.cn>
---
MAINTAINERS | 1 +
arch/unicore32/configs/debug_defconfig | 2 +-
drivers/net/Kconfig | 5 +
drivers/net/Makefile | 1 +
drivers/net/mac-puv3.c | 1942 ++++++++++++++++++++++++++++++++
5 files changed, 1950 insertions(+), 1 deletions(-)
create mode 100644 drivers/net/mac-puv3.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 6ff33ec..4e0b495 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4930,6 +4930,7 @@ F: drivers/input/serio/i8042-unicore32io.h
F: drivers/i2c/busses/i2c-puv3.c
F: drivers/video/fb-puv3.c
F: drivers/rtc/rtc-puv3.c
+F: drivers/net/mac-puv3.c
PMC SIERRA MaxRAID DRIVER
M: Anil Ravindranath <anil_ravindranath@...-sierra.com>
diff --git a/arch/unicore32/configs/debug_defconfig b/arch/unicore32/configs/debug_defconfig
index 9b9c251..69b002c 100644
--- a/arch/unicore32/configs/debug_defconfig
+++ b/arch/unicore32/configs/debug_defconfig
@@ -64,7 +64,6 @@ CONFIG_I2C_BATTERY_BQ27200=n
CONFIG_I2C_EEPROM_AT24=n
CONFIG_LCD_BACKLIGHT=n
-CONFIG_PUV3_UMAL=y
CONFIG_PUV3_MUSB=n
CONFIG_PUV3_AC97=n
CONFIG_PUV3_NAND=n
@@ -101,6 +100,7 @@ CONFIG_SATA_VIA=y
# Network device support
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
+CONFIG_MAC_PUV3=y
CONFIG_NETDEV_1000=y
# Wireless LAN
CONFIG_WLAN_80211=n
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 19f04a3..8f8e82d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2023,6 +2023,11 @@ config LANTIQ_ETOP
help
Support for the MII0 inside the Lantiq SoC
+config MAC_PUV3
+ tristate "PKUnity v3 UMAL Gigabit Network Adapter support"
+ depends on UNICORE32 && ARCH_PUV3
+ select MII
+ select PHYLIB
source "drivers/net/fs_enet/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 209fbb7..4c96359 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -148,6 +148,7 @@ obj-$(CONFIG_NE_H8300) += ne-h8300.o
obj-$(CONFIG_AX88796) += ax88796.o
obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
+obj-$(CONFIG_MAC_PUV3) += mac-puv3.o
obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
diff --git a/drivers/net/mac-puv3.c b/drivers/net/mac-puv3.c
new file mode 100644
index 0000000..d5163a5
--- /dev/null
+++ b/drivers/net/mac-puv3.c
@@ -0,0 +1,1942 @@
+/*
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Maintained by GUAN Xue-tao <gxt@...c.pku.edu.cn>
+ * Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/bug.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/cache.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+MODULE_DESCRIPTION("PKUNITY-3 SoC Ethernet driver");
+MODULE_LICENSE("GPL v2");
+
+/**********************************************************************
+ * Globals
+ ********************************************************************* */
+static const char umal_string[] = "PKUnity-v3-UMAL";
+static const char umal_mdio_string[] = "umal-mdio";
+
+/**********************************************************************
+ * Simple types
+ ********************************************************************* */
+enum umal_speed {
+ umal_speed_none = 0,
+ umal_speed_10 = SPEED_10,
+ umal_speed_100 = SPEED_100,
+ umal_speed_1000 = SPEED_1000,
+};
+
+enum umal_duplex {
+ umal_duplex_none = -1,
+ umal_duplex_half = DUPLEX_HALF,
+ umal_duplex_full = DUPLEX_FULL,
+};
+
+enum umal_fc {
+ umal_fc_none,
+ umal_fc_disabled,
+ umal_fc_frame,
+ umal_fc_collision,
+ umal_fc_carrier,
+};
+
+enum umal_state {
+ umal_state_uninit,
+ umal_state_off,
+ umal_state_on,
+ umal_state_broken,
+};
+
+/**********************************************************************
+ * Macros
+ ********************************************************************* */
+#define UMALDMA_NEXTBUF(d, f) ((((d)->f+1) == (d)->umaldma_dscrtable_end) ? \
+ (d)->umaldma_dscrtable : (d)->f+1)
+
+#define DMA_RX 0
+#define DMA_TX 1
+
+#define UMAL_MAX_TXDESCR 256
+#define UMAL_MAX_RXDESCR 256
+
+#define ETHER_ADDR_LEN 6
+#define ENET_PACKET_SIZE 1518
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (2*HZ)
+
+/**********************************************************************
+ * DMA Descriptor structure
+ ********************************************************************* */
+struct umaldmadscr {
+ dma_addr_t PacketStartAddr;
+ int PacketSize;
+ dma_addr_t NextDescriptor;
+ struct umaldmadscr *NextDescriptor_Virt;
+};
+
+/**********************************************************************
+ * DMA Controller structure
+ ********************************************************************* */
+struct umaldma {
+ /*
+ * This stuff is used to identify the channel and the registers
+ * associated with it.
+ */
+ /* back pointer to associated MAC */
+ struct umal_softc *umaldma_eth;
+ /* direction (1=transmit) */
+ int umaldma_txdir;
+ /* total # of descriptors in ring */
+ int umaldma_maxdescr;
+ /*
+ * This stuff is for maintenance of the ring
+ */
+ /* base of descriptor table */
+ struct umaldmadscr *umaldma_dscrtable;
+ void *umaldma_dscrtable_unaligned;
+ /* and also the phys addr */
+ dma_addr_t umaldma_dscrtable_phys;
+ /* and also the phys addr */
+ dma_addr_t umaldma_dscrtable_phys_unaligned;
+ /* end of descriptor table */
+ struct umaldmadscr *umaldma_dscrtable_end;
+ /* context table, one per descr */
+ struct sk_buff **umaldma_ctxtable;
+ /* next dscr for sw to add */
+ struct umaldmadscr *umaldma_addptr;
+ /* next dscr for sw to remove */
+ struct umaldmadscr *umaldma_remptr;
+};
+
+/**********************************************************************
+ * Ethernet softc structure
+ ********************************************************************* */
+struct umal_softc {
+ /* Linux-specific things */
+ struct net_device *umal_dev; /* pointer to linux device */
+ int umal_idx;
+ struct phy_device *phy_dev; /* the associated PHY device */
+ struct mii_bus *mii_bus; /* the MII bus */
+ int phy_irq[PHY_MAX_ADDR];
+ spinlock_t umal_lock; /* spin lock */
+ int umal_devflags; /* current device flags */
+
+ /* Controller-specific things */
+ enum umal_state umal_state; /* current state */
+ unsigned char umal_hwaddr[ETHER_ADDR_LEN];
+
+ enum umal_speed umal_speed; /* current speed */
+ enum umal_duplex umal_duplex; /* current duplex */
+ enum umal_fc umal_fc; /* cur. flow control setting */
+ int umal_pause; /* current pause setting */
+ int umal_link; /* current link state */
+
+ struct umaldma umal_rxdma; /* rx dma channel */
+ struct umaldma umal_txdma; /* tx dma channel */
+};
+
+/**********************************************************************
+ * Prototypes
+ ********************************************************************* */
+static int umal_mii_reset(struct mii_bus *bus);
+static int umal_mii_read(struct mii_bus *bus, int phyaddr, int regidx);
+static int umal_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
+ u16 val);
+static int umal_mii_probe(struct net_device *dev);
+
+static void umaldma_initctx(struct umaldma *d, struct umal_softc *s,
+ int rxtx, int maxdescr);
+static void umaldma_uninitctx(struct umaldma *d);
+static void umaldma_channel_start(struct umaldma *d, int rxtx);
+static void umaldma_channel_stop(struct umaldma *d);
+static int umaldma_add_rcvbuffer(struct umal_softc *sc, struct umaldma *d,
+ struct sk_buff *m);
+static int umaldma_add_txbuffer(struct umaldma *d, struct sk_buff *m);
+static void umaldma_emptyring(struct umaldma *d);
+static void umaldma_fillring(struct umal_softc *sc, struct umaldma *d);
+static int umaldma_rx_process(struct umal_softc *sc, struct umaldma *d,
+ int work_to_do, int poll);
+static void umaldma_tx_process(struct umal_softc *sc, struct umaldma *d,
+ int poll);
+
+static int umal_initctx(struct umal_softc *s);
+static void umal_uninitctx(struct umal_softc *s);
+static void umal_channel_start(struct umal_softc *s);
+static void umal_channel_stop(struct umal_softc *s);
+static enum umal_state umal_set_channel_state(struct umal_softc *,
+ enum umal_state);
+
+static int umal_init(struct platform_device *pldev, long long base);
+static int umal_open(struct net_device *dev);
+static int umal_close(struct net_device *dev);
+static int umal_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static irqreturn_t umal_intr(int irq, void *dev_instance);
+static void umal_clr_intr(struct net_device *dev);
+static int umal_start_tx(struct sk_buff *skb, struct net_device *dev);
+static void umal_tx_timeout(struct net_device *dev);
+static void umal_set_rx_mode(struct net_device *dev);
+static void umal_promiscuous_mode(struct umal_softc *sc, int onoff);
+static void umal_setmulti(struct umal_softc *sc);
+static int umal_set_speed(struct umal_softc *s, enum umal_speed speed);
+static int umal_set_duplex(struct umal_softc *s, enum umal_duplex duplex,
+ enum umal_fc fc);
+static int umal_change_mtu(struct net_device *_dev, int new_mtu);
+static void umal_miipoll(struct net_device *dev);
+
+/**********************************************************************
+ * MII Bus functions for PAL (phy abstraction layer)
+ ********************************************************************* */
+
+/**********************************************************************
+ * UMAL_MII_RESET(bus)
+ *
+ * Reset MII bus.
+ *
+ * Input parameters:
+ * bus - MDIO bus handle
+ *
+ * Return value:
+ * 0 if ok
+ ********************************************************************* */
+static int umal_mii_reset(struct mii_bus *bus)
+{
+ /* reset the MII management */
+ writel(UMAL_MIICFG_RESET, UMAL_MIICFG);
+ /* enable the MII management */
+ writel(0, UMAL_MIICFG);
+ /* source clock division = 28 */
+ writel(readl(UMAL_MIICFG) | 0x7, UMAL_MIICFG);
+
+ return 0;
+}
+
+/**********************************************************************
+ * UMAL_MII_READ(bus, phyaddr, regidx)
+ * Read a PHY register.
+ *
+ * Input parameters:
+ * bus - MDIO bus handle
+ * phyaddr - PHY's address
+ * regnum - index of register to read
+ *
+ * Return value:
+ * value read, or 0xffff if an error occurred.
+ ********************************************************************* */
+static int umal_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
+{
+ int tmp = 0;
+
+ writel((phyaddr<<8) | regidx, UMAL_MIIADDR);
+ writel(UMAL_MIICMD_READ, UMAL_MIICMD);
+
+ tmp = readl(UMAL_MIIIDCT);
+ while (tmp & UMAL_MIIIDCT_BUSY)
+ tmp = readl(UMAL_MIIIDCT);
+
+ if (tmp & UMAL_MIIIDCT_NOTVALID)
+ return 0xffff;
+
+ writel(0, UMAL_MIICMD);
+
+ tmp = readl(UMAL_MIISTATUS);
+ return tmp;
+}
+
+/**********************************************************************
+ * UMAL_MII_WRITE(bus, phyaddr, regidx, regval)
+ *
+ * Write a value to a PHY register.
+ *
+ * Input parameters:
+ * bus - MDIO bus handle
+ * phyaddr - PHY to use
+ * regidx - register within the PHY
+ * regval - data to write to register
+ *
+ * Return value:
+ * 0 if ok
+ ********************************************************************* */
+static int umal_mii_write(struct mii_bus *bus, int phyaddr, int regidx, u16 val)
+{
+ int tmp = 0;
+
+ writel((phyaddr<<8) | regidx, UMAL_MIIADDR);
+ writel(val, UMAL_MIICTRL);
+
+ tmp = readl(UMAL_MIIIDCT);
+ while (tmp & UMAL_MIIIDCT_BUSY)
+ tmp = readl(UMAL_MIIIDCT);
+
+ return 0;
+}
+
+/**********************************************************************
+ * UMAL_MII_PROBE(dev)
+ *
+ * Write a value to a PHY register.
+ *
+ * Input parameters:
+ * dev - net_device structure
+ *
+ * Return value:
+ * 0 if ok
+ ********************************************************************* */
+static int umal_mii_probe(struct net_device *dev)
+{
+ struct umal_softc *sc = netdev_priv(dev);
+ struct phy_device *phy_dev;
+ int i;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ phy_dev = sc->mii_bus->phy_map[i];
+ if (phy_dev)
+ break;
+ }
+ if (!phy_dev) {
+ printk(KERN_ERR "%s: no PHY found\n", dev->name);
+ return -ENXIO;
+ }
+
+ phy_dev = phy_connect(dev, dev_name(&phy_dev->dev), &umal_miipoll, 0,
+ PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(phy_dev)) {
+ printk(KERN_ERR "%s: could not attach to PHY\n", dev->name);
+ return PTR_ERR(phy_dev);
+ }
+
+ /* Remove any features not supported by the controller */
+ phy_dev->supported &= SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_MII;
+ phy_dev->advertising = phy_dev->supported;
+
+ pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+ dev->name, phy_dev->drv->name,
+ dev_name(&phy_dev->dev), phy_dev->irq);
+
+ sc->phy_dev = phy_dev;
+
+ return 0;
+}
+
+/**********************************************************************
+ * UMAL DMA functions
+ ********************************************************************* */
+
+/**********************************************************************
+ * UMALDMA_INITCTX(d,s,txrx,maxdescr)
+ *
+ * Initialize a DMA channel context. Since there are potentially
+ * eight DMA channels per MAC, it's nice to do this in a standard
+ * way.
+ *
+ * Input parameters:
+ * d - struct umaldma (DMA channel context)
+ * s - struct umal_softc (pointer to a MAC)
+ * txrx - Identifies DMA_TX or DMA_RX for channel direction
+ * maxdescr - number of descriptors
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umaldma_initctx(struct umaldma *d, struct umal_softc *s, int rxtx,
+ int maxdescr)
+{
+ struct umaldmadscr *dscr_item;
+ int idx;
+
+ /*
+ * Save away interesting stuff in the structure
+ */
+ d->umaldma_eth = s;
+ d->umaldma_txdir = rxtx;
+ d->umaldma_maxdescr = maxdescr;
+
+ /*
+ * Allocate memory for the ring
+ */
+ d->umaldma_dscrtable_unaligned = dma_alloc_coherent(NULL,
+ sizeof(*d->umaldma_dscrtable),
+ &d->umaldma_dscrtable_phys_unaligned,
+ GFP_KERNEL | GFP_DMA);
+ dma_cache_sync(NULL, d->umaldma_dscrtable_unaligned,
+ sizeof(*d->umaldma_dscrtable), DMA_BIDIRECTIONAL);
+
+ /*
+ * The descriptor table must be aligned to at least 16 bytes or the
+ * MAC will corrupt it.
+ */
+ d->umaldma_dscrtable = (struct umaldmadscr *)
+ ALIGN((unsigned long)d->umaldma_dscrtable_unaligned,
+ sizeof(*d->umaldma_dscrtable));
+ d->umaldma_dscrtable_end = d->umaldma_dscrtable + d->umaldma_maxdescr;
+ d->umaldma_dscrtable_phys = ALIGN((unsigned long)
+ d->umaldma_dscrtable_phys_unaligned,
+ sizeof(*d->umaldma_dscrtable));
+
+ for (idx = 0; idx < d->umaldma_maxdescr; idx++) {
+ dscr_item = d->umaldma_dscrtable + idx;
+ dscr_item->PacketStartAddr = 0;
+ dscr_item->PacketSize = UMAL_DESC_PACKETSIZE_EMPTY;
+ dscr_item->NextDescriptor = (dma_addr_t)(
+ (struct umaldmadscr *)d->umaldma_dscrtable_phys
+ + (idx+1));
+ dscr_item->NextDescriptor_Virt = d->umaldma_dscrtable + (idx+1);
+ }
+ dscr_item = d->umaldma_dscrtable +
+ (d->umaldma_maxdescr - 1);
+ dscr_item->NextDescriptor = d->umaldma_dscrtable_phys;
+ dscr_item->NextDescriptor_Virt = d->umaldma_dscrtable;
+
+ d->umaldma_addptr = d->umaldma_dscrtable;
+ d->umaldma_remptr = d->umaldma_dscrtable;
+
+ /*
+ * And context table
+ */
+ d->umaldma_ctxtable = kcalloc(d->umaldma_maxdescr,
+ sizeof(*d->umaldma_ctxtable), GFP_KERNEL);
+}
+
+/**********************************************************************
+ * UMALDMA_UNINITCTX(d)
+ *
+ * Uninitialize a DMA channel context.
+ *
+ * Input parameters:
+ * d - struct umaldma (DMA channel context)
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umaldma_uninitctx(struct umaldma *d)
+{
+ if (d->umaldma_dscrtable_unaligned) {
+ dma_free_coherent(NULL, sizeof(*d->umaldma_dscrtable),
+ d->umaldma_dscrtable_unaligned,
+ d->umaldma_dscrtable_phys_unaligned);
+ d->umaldma_dscrtable_unaligned = d->umaldma_dscrtable = NULL;
+ d->umaldma_dscrtable_phys_unaligned = 0;
+ d->umaldma_dscrtable_phys = 0;
+ }
+
+ kfree(d->umaldma_ctxtable);
+ d->umaldma_ctxtable = NULL;
+}
+
+/**********************************************************************
+ * UMALDMA_CHANNEL_START(d)
+ *
+ * Open a DMA channel.
+ *
+ * Input parameters:
+ * d - DMA channel to init (context must be previously init'd)
+ * rxtx - DMA_RX or DMA_TX depending on what type of channel
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umaldma_channel_start(struct umaldma *d, int rxtx)
+{
+ /*
+ * Turn on the DMA channel
+ */
+ if (rxtx == DMA_TX) {
+ writel(d->umaldma_dscrtable_phys, UMAL_DMATxDescriptor);
+ writel(UMAL_DMA_Enable, UMAL_DMATxCtrl);
+ } else {
+ writel(d->umaldma_dscrtable_phys, UMAL_DMARxDescriptor);
+ writel(UMAL_DMA_Enable, UMAL_DMARxCtrl);
+ }
+}
+
+/**********************************************************************
+ * UMALDMA_CHANNEL_STOP(d)
+ *
+ * Close DMA channel.
+ *
+ * Input parameters:
+ * d - DMA channel to init (context must be previously init'd
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umaldma_channel_stop(struct umaldma *d)
+{
+ /*
+ * Turn off the DMA channel
+ */
+ if (d->umaldma_txdir == DMA_TX) {
+ writel(0, UMAL_DMATxCtrl);
+ writel(0, UMAL_DMATxDescriptor);
+ } else {
+ writel(0, UMAL_DMARxCtrl);
+ writel(0, UMAL_DMARxDescriptor);
+ }
+
+ /*
+ * Zero ring pointers
+ */
+ d->umaldma_addptr = d->umaldma_dscrtable;
+ d->umaldma_remptr = d->umaldma_dscrtable;
+}
+
+/**********************************************************************
+ * UMALDMA_ADD_RCVBUFFER(d,sb)
+ *
+ * Add a buffer to the specified DMA channel.
+ * For receive channels, this queues a buffer for inbound packets.
+ *
+ * Input parameters:
+ * sc - softc structure
+ * d - DMA channel descriptor
+ * sb - sk_buff to add, or NULL if we should allocate one
+ *
+ * Return value:
+ * 0 if buffer could not be added (ring is full)
+ * 1 if buffer added successfully
+ ********************************************************************* */
+static int umaldma_add_rcvbuffer(struct umal_softc *sc, struct umaldma *d,
+ struct sk_buff *sb)
+{
+ struct net_device *dev = sc->umal_dev;
+ struct umaldmadscr *dsc;
+ struct umaldmadscr *nextdsc;
+ struct sk_buff *sb_new = NULL;
+
+ /* get pointer to our current place in the ring */
+ dsc = d->umaldma_addptr;
+ nextdsc = UMALDMA_NEXTBUF(d, umaldma_addptr);
+
+ /*
+ * figure out if the ring is full - if the next descriptor
+ * is the same as the one that we're going to remove from
+ * the ring, the ring is full
+ */
+ if (nextdsc == d->umaldma_remptr)
+ return -ENOSPC;
+
+ /*
+ * Allocate a sk_buff if we don't already have one.
+ * If we do have an sk_buff, reset it so that it's empty.
+ *
+ * Note: sk_buffs don't seem to be guaranteed to have any sort
+ * of alignment when they are allocated. Therefore, allocate enough
+ * extra space to make sure that:
+ *
+ * 1. the data does not start in the middle of a cache line.
+ * 2. The data does not end in the middle of a cache line
+ * 3. The buffer can be aligned such that the IP addresses are
+ * naturally aligned.
+ *
+ * Remember, the SOCs MAC writes whole cache lines at a time,
+ * without reading the old contents first. So, if the sk_buff's
+ * data portion starts in the middle of a cache line, the SOC
+ * DMA will trash the beginning (and ending) portions.
+ */
+ if (sb == NULL) {
+ sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE +
+ SMP_CACHE_BYTES * 2 + NET_IP_ALIGN);
+ if (sb_new == NULL) {
+ pr_info("%s: sk_buff allocation failed\n",
+ d->umaldma_eth->umal_dev->name);
+ return -ENOBUFS;
+ }
+ skb_reserve(sb_new, 2);
+ } else {
+ sb_new = sb;
+ /*
+ * nothing special to reinit buffer, it's already aligned
+ * and sb->data already points to a good place.
+ */
+ }
+
+ /* fill in the descriptor */
+ dsc->PacketStartAddr = virt_to_phys(sb_new->data);
+ dsc->PacketSize = UMAL_DESC_PACKETSIZE_EMPTY;
+
+ /* fill in the context */
+ d->umaldma_ctxtable[dsc-d->umaldma_dscrtable] = sb_new;
+
+ /* point at next packet */
+ d->umaldma_addptr = nextdsc;
+
+ return 0;
+}
+
+/**********************************************************************
+ * UMALDMA_ADD_TXBUFFER(d,sb)
+ *
+ * Add a transmit buffer to the specified DMA channel, causing a
+ * transmit to start.
+ *
+ * Input parameters:
+ * d - DMA channel descriptor
+ * sb - sk_buff to add
+ *
+ * Return value:
+ * 0 transmit queued successfully
+ * otherwise error code
+ ********************************************************************* */
+static int umaldma_add_txbuffer(struct umaldma *d, struct sk_buff *sb)
+{
+ struct umaldmadscr *dsc;
+ struct umaldmadscr *nextdsc;
+
+ /* get pointer to our current place in the ring */
+ dsc = d->umaldma_addptr;
+ nextdsc = UMALDMA_NEXTBUF(d, umaldma_addptr);
+
+ /*
+ * figure out if the ring is full - if the next descriptor
+ * is the same as the one that we're going to remove from
+ * the ring, the ring is full
+ */
+ if (nextdsc == d->umaldma_remptr)
+ return -ENOSPC;
+
+ /*
+ * fill in the descriptor. Note that the number of cache
+ * blocks in the descriptor is the number of blocks
+ * *spanned*, so we need to add in the offset (if any)
+ * while doing the calculation.
+ */
+ dsc->PacketStartAddr = virt_to_phys(sb->data);
+ dsc->PacketSize = sb->len | UMAL_DESC_PACKETSIZE_NONEMPTY;
+
+ dma_map_single(NULL, sb->data, sb->len, DMA_BIDIRECTIONAL);
+ dma_cache_sync(NULL, sb->data, sb->len, DMA_BIDIRECTIONAL);
+
+ /* fill in the context */
+ d->umaldma_ctxtable[dsc-d->umaldma_dscrtable] = sb;
+
+ /* point at next packet */
+ d->umaldma_addptr = nextdsc;
+
+ return 0;
+}
+
+/**********************************************************************
+ * UMALDMA_EMPTYRING(d)
+ *
+ * Free all allocated sk_buffs on the specified DMA channel;
+ *
+ * Input parameters:
+ * d - DMA channel
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umaldma_emptyring(struct umaldma *d)
+{
+ int idx;
+ struct sk_buff *sb;
+
+ for (idx = 0; idx < d->umaldma_maxdescr; idx++) {
+ sb = d->umaldma_ctxtable[idx];
+ if (sb) {
+ dev_kfree_skb(sb);
+ d->umaldma_ctxtable[idx] = NULL;
+ }
+ }
+}
+
+/**********************************************************************
+ * UMALDMA_FILLRING(sc,d)
+ *
+ * Fill the specified DMA channel (must be receive channel) with sk_buffs
+ *
+ * Input parameters:
+ * sc - softc structure
+ * d - DMA channel
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umaldma_fillring(struct umal_softc *sc, struct umaldma *d)
+{
+ int idx;
+ for (idx = 0; idx < UMAL_MAX_RXDESCR - 1; idx++) {
+ if (umaldma_add_rcvbuffer(sc, d, NULL) != 0)
+ break;
+ }
+}
+
+/**********************************************************************
+ * UMALDMA_RX_PROCESS(sc,d,work_to_do,poll)
+ *
+ * Process "completed" receive buffers on the specified DMA channel.
+ *
+ * Input parameters:
+ * sc - softc structure
+ * d - DMA channel context
+ * work_to_do - no. of packets to process before enabling interrupt
+ * again (for NAPI)
+ * poll - 1: using polling (for NAPI)
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static int umaldma_rx_process(struct umal_softc *sc, struct umaldma *d,
+ int work_to_do, int poll)
+{
+ struct net_device *dev = sc->umal_dev;
+ int curidx;
+ int hwidx;
+ struct umaldmadscr *dsc;
+ struct sk_buff *sb;
+ int len;
+ int work_done = 0;
+ int dropped = 0;
+ unsigned int int_status;
+
+ if (!netif_device_present(dev))
+ return 0;
+
+ int_status = readl(UMAL_DMAInterrupt);
+
+ if (int_status & INT_RX_BUS_ERR) {
+ writel(CLR_RX_BUS_ERR, UMAL_DMARxStatus);
+ writel(readl(UMAL_DMARxCtrl) | UMAL_DMA_Enable, UMAL_DMARxCtrl);
+ }
+
+ if (int_status & INT_RX_OVERFLOW) {
+ writel(CLR_RX_OVERFLOW, UMAL_DMARxStatus);
+ writel(readl(UMAL_DMARxCtrl) | UMAL_DMA_Enable, UMAL_DMARxCtrl);
+ }
+
+ if (!(int_status & INT_RX_PKT))
+ return 0;
+
+ while (work_to_do-- > 0) {
+ /*
+ * figure out where we are (as an index) and where
+ * the hardware is (also as an index)
+ *
+ * This could be done faster if (for example) the
+ * descriptor table was page-aligned and contiguous in
+ * both virtual and physical memory -- you could then
+ * just compare the low-order bits of the virtual
+ * address (sbdma_remptr) and the physical address
+ * (sbdma_curdscr CSR)
+ */
+ dsc = d->umaldma_remptr;
+ curidx = dsc - d->umaldma_dscrtable;
+
+ hwidx = (struct umaldmadscr *) readl(UMAL_DMARxDescriptor) -
+ (struct umaldmadscr *)d->umaldma_dscrtable_phys;
+
+ writel(CLR_RX_PKT, UMAL_DMARxStatus);
+
+ /*
+ * If they're the same, that means we've processed all
+ * of the descriptors up to (but not including) the one
+ * that the hardware is working on right now.
+ */
+ if (curidx == hwidx)
+ goto done;
+
+ /*
+ * Otherwise, get the packet's sk_buff ptr back
+ */
+ sb = d->umaldma_ctxtable[curidx];
+ len = dsc->PacketSize & 0xfff;
+ d->umaldma_ctxtable[curidx] = NULL;
+
+ /* .. and advance to the next buffer. */
+ d->umaldma_remptr = UMALDMA_NEXTBUF(d, umaldma_remptr);
+
+ /*
+ * Check packet status. If good, process it.
+ * If not, silently drop it and put it back on the
+ * receive ring.
+ */
+ if (likely(!(dsc->PacketSize & UMAL_DESC_PACKETSIZE_EMPTY))) {
+ /*
+ * Add a new buffer to replace the old one.
+ * If we fail to allocate a buffer, we're going
+ * to drop this packet and put it right back on
+ * the receive ring.
+ */
+ if (unlikely(umaldma_add_rcvbuffer(sc, d, NULL)
+ == -ENOBUFS)) {
+ dev->stats.rx_dropped++;
+ /* Re-add old buffer */
+ umaldma_add_rcvbuffer(sc, d, sb);
+ /* No point in continuing */
+ printk(KERN_ERR "dropped packet (1)\n");
+ d->umaldma_remptr = UMALDMA_NEXTBUF(d,
+ umaldma_remptr);
+ goto done;
+ } else {
+ /* Set length into the packet */
+ skb_put(sb, len + 4);
+
+ /*
+ * Buffer has been replaced on the
+ * receive ring. Pass the buffer to
+ * the kernel
+ */
+ sb->protocol = eth_type_trans(sb,
+ d->umaldma_eth->umal_dev);
+ /*
+ * Check hw IPv4/TCP checksum
+ * if supported
+ */
+ skb_checksum_none_assert(sb);
+
+ if (poll)
+ dropped = netif_receive_skb(sb);
+ else
+ dropped = netif_rx(sb);
+
+ if (dropped == NET_RX_DROP) {
+ dev->stats.rx_dropped++;
+ d->umaldma_remptr = UMALDMA_NEXTBUF(d,
+ umaldma_remptr);
+ goto done;
+ } else {
+ dev->stats.rx_bytes += len;
+ dev->stats.rx_packets++;
+ }
+ }
+ } else {
+ /*
+ * Packet was mangled somehow. Just drop it and
+ * put it back on the receive ring.
+ */
+ dev->stats.rx_errors++;
+ umaldma_add_rcvbuffer(sc, d, sb);
+ }
+ work_done++;
+ }
+done:
+ return work_done;
+}
+
+/**********************************************************************
+ * UMALDMA_TX_PROCESS(sc,d,poll)
+ *
+ * Process "completed" transmit buffers on the specified DMA channel.
+ * This is normally called within the interrupt service routine.
+ * Note that this isn't really ideal for priority channels, since
+ * it processes all of the packets on a given channel before
+ * returning.
+ *
+ * Input parameters:
+ * sc - softc structure
+ * d - DMA channel context
+ * poll - 1: using polling (for NAPI)
+ *
+ * Return value:
+ * nothing
+ **********************************************************************/
+static void umaldma_tx_process(struct umal_softc *sc, struct umaldma *d,
+ int poll)
+{
+ struct net_device *dev = sc->umal_dev;
+ int curidx;
+ int hwidx;
+ struct umaldmadscr *dsc;
+ struct sk_buff *sb;
+ unsigned long flags;
+ int packets_handled = 0;
+ unsigned int int_status;
+
+ spin_lock_irqsave(&(sc->umal_lock), flags);
+
+ if (!netif_device_present(dev))
+ return;
+
+ int_status = readl(UMAL_DMAInterrupt);
+
+ if (int_status & INT_TX_BUS_ERR)
+ writel(CLR_TX_BUS_ERR, UMAL_DMATxStatus);
+
+ if (int_status & INT_TX_UNDERRUN)
+ writel(CLR_TX_UNDERRUN, UMAL_DMATxStatus);
+
+ if (int_status & INT_TX_PKT) {
+ hwidx = (struct umaldmadscr *)readl(UMAL_DMATxDescriptor) -
+ (struct umaldmadscr *)d->umaldma_dscrtable_phys;
+
+ if (d->umaldma_remptr == d->umaldma_addptr)
+ goto end_unlock;
+
+ for (;;) {
+ /*
+ * figure out where we are (as an index) and where
+ * the hardware is (also as an index)
+ *
+ * This could be done faster if (for example) the
+ * descriptor table was page-aligned and contiguous in
+ * both virtual and physical memory -- you could then
+ * just compare the low-order bits of the virtual
+ * address (sbdma_remptr) and the physical address
+ * (sbdma_curdscr CSR)
+ */
+ curidx = d->umaldma_remptr - d->umaldma_dscrtable;
+
+ /*
+ * If they're the same, that means we've processed all
+ * of the descriptors up to (but not including) the one
+ * that the hardware is working on right now.
+ */
+ if (curidx == hwidx)
+ break;
+
+ /* Otherwise, get the packet's sk_buff ptr back */
+ dsc = &(d->umaldma_dscrtable[curidx]);
+ sb = d->umaldma_ctxtable[curidx];
+
+ /* Stats */
+ dev->stats.tx_bytes += sb->len;
+ dev->stats.tx_packets++;
+
+ /* for transmits, we just free buffers. */
+ dev_kfree_skb_irq(sb);
+ d->umaldma_ctxtable[curidx] = NULL;
+ writel(CLR_TX_PKT, UMAL_DMATxStatus);
+
+ /* .. and advance to the next buffer. */
+ d->umaldma_remptr = UMALDMA_NEXTBUF(d, umaldma_remptr);
+ packets_handled++;
+ }
+
+ /*
+ * Decide if we should wake up the protocol or not.
+ * Other drivers seem to do this when we reach a low
+ * watermark on the transmit queue.
+ */
+ if (packets_handled)
+ netif_wake_queue(d->umaldma_eth->umal_dev);
+ }
+
+end_unlock:
+ spin_unlock_irqrestore(&(sc->umal_lock), flags);
+}
+
+/**********************************************************************
+ * UMAL Channel functions
+ ********************************************************************* */
+
+/**********************************************************************
+ * UMAL_INITCTX(s)
+ *
+ * Initialize an Ethernet context structure - this is called
+ * once per MAC. Memory is allocated here, so don't
+ * call it again from inside the ioctl routines that bring the
+ * interface up/down
+ *
+ * Input parameters:
+ * s - umal context structure
+ *
+ * Return value:
+ * 0
+ ********************************************************************* */
+static int umal_initctx(struct umal_softc *s)
+{
+ /*
+ * Initialize the DMA channels.
+ * Note: Only do this _once_, as it allocates memory from the kernel!
+ */
+ umaldma_initctx(&(s->umal_txdma), s, DMA_TX, UMAL_MAX_TXDESCR);
+ umaldma_initctx(&(s->umal_rxdma), s, DMA_RX, UMAL_MAX_RXDESCR);
+
+ /* initial state is OFF */
+ s->umal_state = umal_state_off;
+
+ return 0;
+}
+
+/**********************************************************************
+ * UMAL_UNINITCTX(s)
+ *
+ * Initialize an Ethernet context structure.
+ * Memory is allocated here, so don't call it again from inside the
+ * ioctl routines that bring the interface up/down
+ *
+ * Input parameters:
+ * s - umal context structure
+ *
+ * Return value:
+ * Nothing
+ ********************************************************************* */
+static void umal_uninitctx(struct umal_softc *s)
+{
+ umaldma_uninitctx(&(s->umal_txdma));
+ umaldma_uninitctx(&(s->umal_rxdma));
+}
+
+/**********************************************************************
+ * UMAL_CHANNEL_START(s)
+ *
+ * Start packet processing on this MAC.
+ *
+ * Input parameters:
+ * s - umal context structure
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umal_channel_start(struct umal_softc *s)
+{
+ /*
+ * Don't do this if running
+ */
+ if (s->umal_state == umal_state_on)
+ return;
+
+ /* don't accept any packets, disable all interrupts */
+ umaldma_channel_stop(&(s->umal_rxdma));
+ umaldma_channel_stop(&(s->umal_txdma));
+
+ writel(0, UMAL_DMAIntrMask);
+ umal_clr_intr(s->umal_dev);
+
+ /*
+ * Program the hardware address. It goes into the hardware-address
+ * register as well as the first filter register.
+ */
+ writel(s->umal_hwaddr[0]<<24 | s->umal_hwaddr[1]<<16 |
+ s->umal_hwaddr[2]<<8 | s->umal_hwaddr[3], UMAL_STADDR1);
+ writel(s->umal_hwaddr[4]<<24 | s->umal_hwaddr[5]<<16, UMAL_STADDR2);
+
+ /* Configure the speed, duplex, and flow control */
+ umal_set_speed(s, s->umal_speed);
+ umal_set_duplex(s, s->umal_duplex, s->umal_fc);
+
+ /* Program multicast addresses */
+ umal_setmulti(s);
+
+ /* If channel was in promiscuous mode before, turn that on */
+ if (s->umal_devflags & IFF_PROMISC)
+ umal_promiscuous_mode(s, 1);
+
+ /* Fill the receive ring */
+ umaldma_fillring(s, &(s->umal_rxdma));
+
+ umaldma_channel_start(&(s->umal_rxdma), DMA_RX);
+ umaldma_channel_start(&(s->umal_txdma), DMA_TX);
+
+ s->umal_state = umal_state_on;
+
+ /* Initialize DMA channels (rings should be ok now) */
+ writel(INT_RX_BUS_ERR | INT_RX_OVERFLOW |
+ INT_RX_PKT | INT_TX_BUS_ERR |
+ INT_TX_UNDERRUN | INT_TX_PKT |
+ UMAL_DMAIntrMask_ENABLEHALFWORD, UMAL_DMAIntrMask);
+
+ /* we're running now. */
+ writel(readl(UMAL_CFG1) | UMAL_CFG1_RXENABLE | UMAL_CFG1_TXENABLE,
+ UMAL_CFG1);
+}
+
+/**********************************************************************
+ * UMAL_CHANNEL_STOP(s)
+ *
+ * Stop packet processing on this MAC.
+ *
+ * Input parameters:
+ * s - umal context structure
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umal_channel_stop(struct umal_softc *s)
+{
+ /* don't do this if already stopped */
+ if (s->umal_state == umal_state_off)
+ return;
+
+ /* don't accept any packets, disable all interrupts */
+ writel(0, UMAL_DMAIntrMask);
+ umal_clr_intr(s->umal_dev);
+
+ /* turn off receiver and transmitter */
+ writel(UMAL_CFG1_RESET, UMAL_CFG1); /* reset MAC */
+ writel(0, UMAL_CFG1);
+
+ /* We're stopped now. */
+ s->umal_state = umal_state_off;
+
+ /* Stop DMA channels (rings should be ok now) */
+ umaldma_channel_stop(&(s->umal_rxdma));
+ umaldma_channel_stop(&(s->umal_txdma));
+
+ /* Empty the receive and transmit rings */
+ umaldma_emptyring(&(s->umal_rxdma));
+ umaldma_emptyring(&(s->umal_txdma));
+}
+
+/**********************************************************************
+ * UMAL_SET_CHANNEL_STATE(s,state)
+ *
+ * Set the channel's state ON or OFF
+ *
+ * Input parameters:
+ * s - umal context structure
+ * state - new state
+ *
+ * Return value:
+ * old state
+ ********************************************************************* */
+static enum umal_state umal_set_channel_state(struct umal_softc *s,
+ enum umal_state state)
+{
+ enum umal_state oldstate = s->umal_state;
+
+ /* If same as previous state, return */
+ if (state == oldstate)
+ return oldstate;
+
+ /* If new state is ON, turn channel on */
+ if (state == umal_state_on)
+ umal_channel_start(s);
+ else
+ umal_channel_stop(s);
+
+ /* Return previous state */
+ return oldstate;
+}
+
+/**********************************************************************
+ * UMAL functions
+ ********************************************************************* */
+static const struct net_device_ops umal_netdev_ops = {
+ .ndo_open = umal_open,
+ .ndo_stop = umal_close,
+ .ndo_start_xmit = umal_start_tx,
+ .ndo_set_multicast_list = umal_set_rx_mode,
+ .ndo_tx_timeout = umal_tx_timeout,
+ .ndo_do_ioctl = umal_mii_ioctl,
+ .ndo_change_mtu = umal_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
+/**********************************************************************
+ * UMAL_INIT(dev)
+ *
+ * Attach routine - init hardware and hook ourselves into linux
+ *
+ * Input parameters:
+ * dev - net_device structure
+ *
+ * Return value:
+ * 0 if ok
+ ********************************************************************* */
+static int umal_init(struct platform_device *pldev, long long base)
+{
+ struct net_device *dev = dev_get_drvdata(&pldev->dev);
+ int idx = pldev->id;
+ struct umal_softc *sc = netdev_priv(dev);
+ unsigned char *eaddr;
+ int i;
+ int err;
+
+ sc->umal_dev = dev;
+ sc->umal_idx = idx;
+
+ eaddr = sc->umal_hwaddr;
+
+#ifdef CONFIG_CMDLINE_FORCE
+ eaddr[0] = 0x00;
+ eaddr[1] = 0x25;
+ eaddr[2] = 0x9b;
+ eaddr[3] = 0xff;
+ eaddr[4] = 0x00;
+ eaddr[5] = 0x00;
+#endif
+
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = eaddr[i];
+
+ /* Set up Linux device callins */
+ spin_lock_init(&(sc->umal_lock));
+
+ dev->netdev_ops = &umal_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ dev->irq = IRQ_UMAL;
+
+ sc->mii_bus = mdiobus_alloc();
+ if (sc->mii_bus == NULL) {
+ err = -ENOMEM;
+ goto uninit_ctx;
+ }
+
+ sc->mii_bus->name = umal_mdio_string;
+ snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx);
+ sc->mii_bus->priv = sc;
+ sc->mii_bus->read = umal_mii_read;
+ sc->mii_bus->write = umal_mii_write;
+ sc->mii_bus->reset = umal_mii_reset;
+ sc->mii_bus->irq = sc->phy_irq;
+ for (i = 0; i < PHY_MAX_ADDR; ++i)
+ sc->mii_bus->irq[i] = PHY_POLL;
+
+ sc->mii_bus->parent = &pldev->dev;
+
+ /* Probe PHY address */
+ err = mdiobus_register(sc->mii_bus);
+ if (err) {
+ printk(KERN_ERR "%s: unable to register MDIO bus\n",
+ dev->name);
+ goto free_mdio;
+ }
+ dev_set_drvdata(&pldev->dev, sc->mii_bus);
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR "%s.%d: unable to register netdev\n",
+ umal_string, idx);
+ goto unreg_mdio;
+ }
+
+ pr_info("%s.%d: registered as %s\n", umal_string, idx, dev->name);
+
+ /*
+ * Initialize context (get pointers to registers and stuff), then
+ * allocate the memory for the descriptor tables.
+ */
+ dev->dev.coherent_dma_mask = 0xFFFFFFFF;
+ umal_initctx(sc);
+
+ /*
+ * Display Ethernet address (this is called during the config
+ * process so we need to finish off the config message that
+ * was being displayed)
+ */
+ pr_info("%s: UMAL Ethernet at 0x%08Lx, address: %pM\n",
+ dev->name, base, eaddr);
+
+ return 0;
+unreg_mdio:
+ mdiobus_unregister(sc->mii_bus);
+ dev_set_drvdata(&pldev->dev, NULL);
+free_mdio:
+ mdiobus_free(sc->mii_bus);
+uninit_ctx:
+ umal_uninitctx(sc);
+ return err;
+}
+
+/**********************************************************************
+ * UMAL_OPEN(dev)
+ *
+ * Open umal device
+ *
+ * Input parameters:
+ * dev - net_device structure
+ *
+ * Return value:
+ * 0 if ok
+ * otherwise error
+ ********************************************************************* */
+static int umal_open(struct net_device *dev)
+{
+ struct umal_softc *sc = netdev_priv(dev);
+ int err;
+
+ sc->umal_speed = umal_speed_none;
+ sc->umal_duplex = umal_duplex_none;
+ sc->umal_fc = umal_fc_none;
+ sc->umal_pause = -1;
+ sc->umal_link = 0;
+
+ /* reset mac and interface */
+ writel(UMAL_CFG1_RESET, UMAL_CFG1); /* reset MAC */
+ writel(0, UMAL_CFG1); /* clear the reset bit of MAC */
+ writel(UMAL_IFCTRL_RESET, UMAL_IFCTRL); /* reset the MAC Interface */
+ writel(0, UMAL_DMAIntrMask);
+
+ /* Attach to the PHY */
+ err = umal_mii_probe(dev);
+ if (err)
+ goto out_unregister;
+
+ /* Turn on the channel */
+ phy_start(sc->phy_dev);
+
+ /* config fifo */
+ writel(0x000000ff, UMAL_FIFOCFG0); /* reset FIFO */
+ writel(0x0fff0fff, UMAL_FIFOCFG1);
+ writel(0x0aaa0555, UMAL_FIFOCFG2);
+ writel(0x02800fff, UMAL_FIFOCFG3);
+ writel(0x00000070, UMAL_FIFOCFG4);
+ writel(0x0007ff8f, UMAL_FIFOCFG5);
+ writel(0x0000ff00, UMAL_FIFOCFG0);
+
+ writel(0x7016, UMAL_CFG2);
+
+ /*
+ * map/route interrupt (clear status first, in case something
+ * weird is pending; we haven't initialized the mac registers
+ * yet)
+ */
+ umal_clr_intr(dev);
+
+ err = request_irq(dev->irq, umal_intr, IRQF_SHARED, dev->name, dev);
+ if (err) {
+ printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name,
+ dev->irq);
+ goto out_err;
+ }
+
+ umal_set_channel_state(sc, umal_state_on);
+
+ netif_start_queue(dev);
+
+ umal_set_rx_mode(dev);
+
+ return 0;
+
+out_unregister:
+ free_irq(dev->irq, dev);
+out_err:
+ return err;
+}
+
+/**********************************************************************
+ * UMAL_CLSOE(dev)
+ *
+ * Close umal device
+ *
+ * Input parameters:
+ * dev - net_device structure
+ *
+ * Return value:
+ * 0 if ok
+ ********************************************************************* */
+static int umal_close(struct net_device *dev)
+{
+ struct umal_softc *sc = netdev_priv(dev);
+
+ phy_stop(sc->phy_dev);
+
+ umal_set_channel_state(sc, umal_state_off);
+
+ netif_stop_queue(dev);
+
+ phy_disconnect(sc->phy_dev);
+ sc->phy_dev = NULL;
+
+ free_irq(dev->irq, dev);
+
+ umaldma_emptyring(&(sc->umal_rxdma));
+ umaldma_emptyring(&(sc->umal_txdma));
+
+ return 0;
+}
+
+/**********************************************************************
+ * UMAL_MII_IOCTL(dev,rq,cmd)
+ *
+ * Umal device ioctrl routine
+ *
+ * Input parameters:
+ * dev - net_device structure
+ * rq - interface request structure
+ * cmd - ioctrl command
+ *
+ * Return value:
+ * ioctrl command result
+ ********************************************************************* */
+static int umal_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct umal_softc *sc = netdev_priv(dev);
+
+ if (!netif_running(dev) || !sc->phy_dev)
+ return -EINVAL;
+
+ return phy_mii_ioctl(sc->phy_dev, rq, cmd);
+}
+
+/**********************************************************************
+ * UMAL_INTR(irq,dev_instance)
+ *
+ * Interrupt handler for MAC interrupts
+ *
+ * Input parameters:
+ * irq - irq number
+ * dev_instance - net_device structure
+ *
+ * Return value:
+ * irq handling result
+ ********************************************************************* */
+static irqreturn_t umal_intr(int irq, void *dev_instance)
+{
+ struct net_device *dev = (struct net_device *) dev_instance;
+ struct umal_softc *sc = netdev_priv(dev);
+ uint64_t isr;
+ int handled = 0;
+
+ /*
+ * Read the ISR (this clears the bits in the real
+ * register, except for counter addr)
+ */
+ isr = readl(UMAL_DMAInterrupt);
+ if (isr == 0)
+ return IRQ_RETVAL(0);
+
+ if (sc->umal_state != umal_state_on) {
+ umal_clr_intr(dev);
+ return IRQ_RETVAL(0);
+ }
+ handled = 1;
+
+ /* Transmits on channel 0 */
+ if (isr & INT_TX_MASK)
+ umaldma_tx_process(sc, &(sc->umal_txdma), 0);
+ if (isr & INT_RX_MASK)
+ umaldma_rx_process(sc, &(sc->umal_rxdma),
+ UMAL_MAX_RXDESCR * 2, 0);
+
+ return IRQ_RETVAL(handled);
+}
+
+/**********************************************************************
+ * UMAL_CLR_INTR(dev)
+ *
+ * Clear all interrupt of umal
+ *
+ * Input parameters:
+ * dev - net_device structure
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umal_clr_intr(struct net_device *dev)
+{
+ unsigned int int_status;
+
+ if (!netif_device_present(dev))
+ return;
+ int_status = readl(UMAL_DMAInterrupt);
+ if (int_status & INT_RX_PKT)
+ writel(CLR_RX_PKT, UMAL_DMARxStatus);
+
+ if (int_status & INT_RX_BUS_ERR)
+ writel(CLR_RX_BUS_ERR, UMAL_DMARxStatus);
+
+ if (int_status & INT_RX_OVERFLOW)
+ writel(CLR_RX_OVERFLOW, UMAL_DMARxStatus);
+
+ if (int_status & INT_TX_PKT)
+ writel(CLR_TX_PKT, UMAL_DMATxStatus);
+
+ if (int_status & INT_TX_BUS_ERR)
+ writel(CLR_TX_BUS_ERR, UMAL_DMATxStatus);
+
+ if (int_status & INT_TX_UNDERRUN)
+ writel(CLR_TX_UNDERRUN, UMAL_DMATxStatus);
+}
+
+/**********************************************************************
+ * UMAL_START_TX(skb,dev)
+ *
+ * Start output on the specified interface. Basically, we
+ * queue as many buffers as we can until the ring fills up, or
+ * we run off the end of the queue, whichever comes first.
+ *
+ * Input parameters:
+ * skb - sk_buff structure
+ * dev - net_device structure
+ *
+ * Return value:
+ * 0 if ok
+ * otherwise error
+ ********************************************************************* */
+static int umal_start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct umal_softc *sc = netdev_priv(dev);
+ unsigned long flags;
+
+ /* lock eth irq */
+ spin_lock_irqsave(&sc->umal_lock, flags);
+
+ /*
+ * Put the buffer on the transmit ring. If we
+ * don't have room, stop the queue.
+ */
+ if (umaldma_add_txbuffer(&(sc->umal_txdma), skb)) {
+ /* XXX: save skb that we could not send */
+ netif_stop_queue(dev);
+ spin_unlock_irqrestore(&sc->umal_lock, flags);
+
+ return NETDEV_TX_BUSY;
+ }
+
+ writel(readl(UMAL_CFG1) | UMAL_CFG1_TXENABLE, UMAL_CFG1);
+ writel(readl(UMAL_DMATxCtrl) | UMAL_DMA_Enable, UMAL_DMATxCtrl);
+
+ spin_unlock_irqrestore(&sc->umal_lock, flags);
+
+ return 0;
+}
+
+/**********************************************************************
+ * UMAL_TX_TIMEOUT(dev)
+ *
+ * Tx timeout, update statistic structure
+ *
+ * Input parameters:
+ * dev - net_device structure
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umal_tx_timeout(struct net_device *dev)
+{
+ struct umal_softc *sc = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&sc->umal_lock, flags);
+
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ dev->stats.tx_errors++;
+
+ spin_unlock_irqrestore(&sc->umal_lock, flags);
+
+ printk(KERN_WARNING "%s: Transmit timed out\n", dev->name);
+}
+
+/**********************************************************************
+ * UMAL_SET_RX_MODE(dev)
+ *
+ * Set promiscuous mode and multicast list
+ *
+ * Input parameters:
+ * dev - net_device structure
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umal_set_rx_mode(struct net_device *dev)
+{
+ unsigned long flags;
+ struct umal_softc *sc = netdev_priv(dev);
+
+ spin_lock_irqsave(&sc->umal_lock, flags);
+ if ((dev->flags ^ sc->umal_devflags) & IFF_PROMISC) {
+ /* Promiscuous changed. */
+ if (dev->flags & IFF_PROMISC)
+ umal_promiscuous_mode(sc, 1);
+ else
+ umal_promiscuous_mode(sc, 0);
+ }
+ spin_unlock_irqrestore(&sc->umal_lock, flags);
+
+ /* Program the multicasts. Do this every time. */
+ umal_setmulti(sc);
+}
+
+/**********************************************************************
+ * UMAL_PROMISCUOUS_MODE(sc,onoff)
+ *
+ * Turn on or off promiscuous mode
+ *
+ * Input parameters:
+ * sc - softc
+ * onoff - 1 to turn on, 0 to turn off
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umal_promiscuous_mode(struct umal_softc *sc, int onoff)
+{
+ if (onoff) {
+ writel(readl(UMAL_FIFOCFG4) & ~0x40000, UMAL_FIFOCFG4);
+ writel(readl(UMAL_FIFOCFG5) | 0x40000, UMAL_FIFOCFG5);
+ } else {
+ writel(readl(UMAL_FIFOCFG4) | 0x40000, UMAL_FIFOCFG4);
+ writel(readl(UMAL_FIFOCFG5) & ~0x40000, UMAL_FIFOCFG5);
+ }
+}
+
+/**********************************************************************
+ * UMAL_SETMULTI(sc)
+ *
+ * Reprogram the multicast table into the hardware, given
+ * the list of multicasts associated with the interface
+ * structure.
+ *
+ * Input parameters:
+ * sc - softc
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umal_setmulti(struct umal_softc *sc)
+{
+}
+
+/**********************************************************************
+ * UMAL_SET_SPEED(s,speed)
+ *
+ * Configure LAN speed for the specified MAC.
+ * Warning: must be called when MAC is off!
+ *
+ * Input parameters:
+ * s - sbmac structure
+ * speed - speed to set MAC to (see enum sbmac_speed)
+ *
+ * Return value:
+ * 1 if successful
+ * 0 indicates invalid parameters
+ ********************************************************************* */
+static int umal_set_speed(struct umal_softc *s, enum umal_speed speed)
+{
+ unsigned int cfg;
+
+ /* Save new current values */
+ s->umal_speed = speed;
+
+ if (s->umal_state == umal_state_on)
+ return 0; /* save for next restart */
+
+ /* Read current register values */
+ cfg = readl(UMAL_CFG2);
+
+ /* Mask out the stuff we want to change */
+ cfg &= ~(UMAL_CFG2_MODEMASK);
+
+ /* Now add in the new bits */
+ switch (speed) {
+ case umal_speed_10:
+ case umal_speed_100:
+ cfg |= UMAL_CFG2_NIBBLEMODE;
+ break;
+
+ default:
+ return 0;
+ }
+
+ /* Send the bits back to the hardware */
+ writel(cfg, UMAL_CFG2);
+
+ return 1;
+}
+
+/**********************************************************************
+ * UMAL_SET_DUPLEX(s,duplex,fc)
+ *
+ * Set Ethernet duplex and flow control options for this MAC
+ * Warning: must be called when MAC is off!
+ *
+ * Input parameters:
+ * s - umal structure
+ * duplex - duplex setting (see enum sbmac_duplex)
+ * fc - flow control setting (see enum sbmac_fc)
+ *
+ * Return value:
+ * 1 if ok
+ * 0 if an invalid parameter combination was specified
+ ********************************************************************* */
+static int umal_set_duplex(struct umal_softc *s, enum umal_duplex duplex,
+ enum umal_fc fc)
+{
+ unsigned int cfg1, cfg2;
+ int err = 0;
+
+ /* Save new current values */
+ s->umal_duplex = duplex;
+ s->umal_fc = fc;
+
+ if (s->umal_state == umal_state_on)
+ return 0; /* save for next restart */
+
+ /* Read current register values */
+ cfg1 = readl(UMAL_CFG1);
+ cfg2 = readl(UMAL_CFG2);
+
+ /* Mask off the stuff we're about to change */
+ cfg1 &= ~(UMAL_CFG1_TXFLOWCTL | UMAL_CFG1_RXFLOWCTL);
+ cfg2 &= ~(UMAL_CFG2_FULLDUPLEX);
+
+ err = 0;
+ switch (duplex) {
+ case umal_duplex_half:
+ break;
+
+ case umal_duplex_full:
+ cfg2 |= UMAL_CFG2_FULLDUPLEX;
+ break;
+
+ default:
+ err = 1;
+ }
+ if (!err)
+ writel(cfg2, UMAL_CFG2);
+
+ err = 0;
+ switch (fc) {
+ case umal_fc_disabled:
+ break;
+
+ case umal_fc_collision:
+ break;
+
+ case umal_fc_carrier:
+ break;
+
+ case umal_fc_frame:
+ cfg1 |= UMAL_CFG1_TXFLOWCTL | UMAL_CFG1_RXFLOWCTL;
+ break;
+
+ default:
+ err = 1;
+ }
+
+ if (!err)
+ writel(cfg1, UMAL_CFG1);
+
+ /* Send the bits back to the hardware */
+ return 1;
+}
+
+/**********************************************************************
+ * UMAL_CHANGE_MTU(dev,new_mtu)
+ *
+ * Change MTU value
+ *
+ * Input parameters:
+ * dev - net_device structure
+ * new_mtu - new mtu value
+ *
+ * Return value:
+ * 1 if ok
+ ********************************************************************* */
+static int umal_change_mtu(struct net_device *dev, int new_mtu)
+{
+ if (new_mtu > ENET_PACKET_SIZE)
+ return -EINVAL;
+
+ dev->mtu = new_mtu;
+
+ pr_info("changing the mtu to %d\n", new_mtu);
+
+ return 0;
+}
+
+/**********************************************************************
+ * UMAL_MIIPOLL(dev)
+ *
+ * Phy statemachine call back routine for link change
+ *
+ * Input parameters:
+ * dev - net_device structure
+ *
+ * Return value:
+ * nothing
+ ********************************************************************* */
+static void umal_miipoll(struct net_device *dev)
+{
+ struct umal_softc *sc = netdev_priv(dev);
+ struct phy_device *phy_dev = sc->phy_dev;
+ unsigned long flags;
+ enum umal_fc fc;
+ int link_chg, speed_chg, duplex_chg, pause_chg, fc_chg;
+
+ link_chg = (sc->umal_link != phy_dev->link);
+ speed_chg = (sc->umal_speed != phy_dev->speed);
+ duplex_chg = (sc->umal_duplex != phy_dev->duplex);
+ pause_chg = (sc->umal_pause != phy_dev->pause);
+
+ if (!link_chg && !speed_chg && !duplex_chg && !pause_chg)
+ return;
+
+ if (!phy_dev->link) {
+ if (link_chg) {
+ sc->umal_link = phy_dev->link;
+ sc->umal_speed = umal_speed_none;
+ sc->umal_duplex = umal_duplex_none;
+ sc->umal_fc = umal_fc_disabled;
+ sc->umal_pause = -1;
+ pr_info("%s: link unavailable\n", dev->name);
+ }
+ return;
+ }
+
+ if (phy_dev->duplex == DUPLEX_FULL) {
+ if (phy_dev->pause)
+ fc = umal_fc_frame;
+ else
+ fc = umal_fc_disabled;
+ } else
+ fc = umal_fc_collision;
+ fc_chg = (sc->umal_fc != fc);
+
+ pr_info("%s: link available: %dbase-%cD\n", dev->name, phy_dev->speed,
+ phy_dev->duplex == DUPLEX_FULL ? 'F' : 'H');
+
+ spin_lock_irqsave(&sc->umal_lock, flags);
+
+ sc->umal_speed = phy_dev->speed;
+ sc->umal_duplex = phy_dev->duplex;
+ sc->umal_fc = fc;
+ sc->umal_pause = phy_dev->pause;
+ sc->umal_link = phy_dev->link;
+
+ if ((speed_chg || duplex_chg || fc_chg) &&
+ sc->umal_state != umal_state_off) {
+ /* something changed, restart the channel */
+ umal_channel_stop(sc);
+ umal_channel_start(sc);
+ }
+
+ spin_unlock_irqrestore(&sc->umal_lock, flags);
+}
+
+static int umal_probe(struct platform_device *pldev)
+{
+ struct net_device *dev;
+ struct umal_softc *sc;
+ struct resource *res;
+ int err;
+
+ res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
+ BUG_ON(!res);
+
+ /* Okay. Initialize this MAC. */
+ dev = alloc_etherdev(sizeof(struct umal_softc));
+ if (!dev) {
+ printk(KERN_ERR "%s: unable to allocate etherdev\n",
+ dev_name(&pldev->dev));
+ err = -ENOMEM;
+ goto out_out;
+ }
+
+ dev_set_drvdata(&pldev->dev, dev);
+ SET_NETDEV_DEV(dev, &pldev->dev);
+
+ sc = netdev_priv(dev);
+
+ err = umal_init(pldev, res->start);
+ if (err)
+ goto out_kfree;
+
+ return 0;
+
+out_kfree:
+ free_netdev(dev);
+
+out_out:
+ return err;
+}
+
+static int __exit umal_remove(struct platform_device *pldev)
+{
+ struct net_device *dev = dev_get_drvdata(&pldev->dev);
+ struct umal_softc *sc = netdev_priv(dev);
+
+ unregister_netdev(dev);
+ umal_uninitctx(sc);
+ mdiobus_unregister(sc->mii_bus);
+ free_netdev(dev);
+
+ return 0;
+}
+
+#if CONFIG_PM
+static void umal_reset(struct net_device *ndev)
+{
+ writel(UMAL_CFG1_RESET, UMAL_CFG1); /* reset MAC */
+ writel(0, UMAL_CFG1); /* clear the reset bit of MAC */
+ writel(UMAL_IFCTRL_RESET, UMAL_IFCTRL); /* reset the MAC Interface */
+ writel(1, UMAL_DMAIntrMask);
+
+ writel(0x000000ff, UMAL_FIFOCFG0); /* reset FIFO */
+ writel(0x0fff0fff, UMAL_FIFOCFG1);
+ writel(0x0aaa0555, UMAL_FIFOCFG2);
+ writel(0x02800fff, UMAL_FIFOCFG3);
+ writel(0x00000070, UMAL_FIFOCFG4);
+ writel(0x0007ff8f, UMAL_FIFOCFG5);
+ writel(0x0000ff00, UMAL_FIFOCFG0);
+
+ writel(0x7016, UMAL_CFG2);
+}
+
+static void umal_shutdown(struct net_device *ndev)
+{
+ /* XXX: something should be cleared */
+ return;
+}
+
+static int umal_suspend(struct platform_device *pldev, pm_message_t state)
+{
+ struct net_device *ndev = platform_get_drvdata(pldev);
+
+ if (netif_running(ndev)) {
+ netif_device_detach(ndev);
+ umal_shutdown(ndev);
+ }
+ return 0;
+}
+
+static int umal_resume(struct platform_device *pldev)
+{
+ struct net_device *dev = platform_get_drvdata(pldev);
+
+ if (netif_running(dev)) {
+ umal_reset(dev);
+ netif_device_attach(dev);
+ }
+ return 0;
+}
+#else
+static int umal_suspend(struct platform_device *pldev, pm_message_t state) { }
+static int umal_resume(struct platform_device *pldev) { }
+#endif
+static struct platform_driver umal_driver = {
+ .probe = umal_probe,
+ .remove = __exit_p(umal_remove),
+ .driver = {
+ .name = umal_string,
+ .owner = THIS_MODULE,
+ },
+ .suspend = umal_suspend,
+ .resume = umal_resume,
+};
+
+static int __init umal_init_module(void)
+{
+ return platform_driver_register(&umal_driver);
+}
+
+static void __exit umal_cleanup_module(void)
+{
+ platform_driver_unregister(&umal_driver);
+}
+
+module_init(umal_init_module);
+module_exit(umal_cleanup_module);
--
1.7.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists