| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20110527015618.GC5032@ponder.secretlab.ca>
Date: Thu, 26 May 2011 19:56:18 -0600
From: Grant Likely <grant.likely@...retlab.ca>
To: David Daney <ddaney@...iumnetworks.com>
Cc: linux-mips@...ux-mips.org, ralf@...ux-mips.org,
devicetree-discuss@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH v4 3/6] MIPS: Octeon: Add device tree source files.
On Fri, May 20, 2011 at 03:25:40PM -0700, David Daney wrote:
> Signed-off-by: David Daney <ddaney@...iumnetworks.com>
> ---
> .../devicetree/bindings/mips/cavium/bootbus.txt | 37 ++
> .../devicetree/bindings/mips/cavium/ciu.txt | 26 ++
> .../devicetree/bindings/mips/cavium/gpio.txt | 48 +++
> .../devicetree/bindings/mips/cavium/mdio.txt | 27 ++
> .../devicetree/bindings/mips/cavium/mix.txt | 40 ++
> .../devicetree/bindings/mips/cavium/pip.txt | 98 +++++
> .../devicetree/bindings/mips/cavium/twsi.txt | 34 ++
> .../devicetree/bindings/mips/cavium/uart.txt | 19 +
> .../devicetree/bindings/mips/cavium/uctl.txt | 47 +++
> arch/mips/cavium-octeon/.gitignore | 2 +
> arch/mips/cavium-octeon/Makefile | 13 +
> arch/mips/cavium-octeon/octeon_3xxx.dts | 375 ++++++++++++++++++++
> 12 files changed, 766 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mips/cavium/bootbus.txt
> create mode 100644 Documentation/devicetree/bindings/mips/cavium/ciu.txt
> create mode 100644 Documentation/devicetree/bindings/mips/cavium/gpio.txt
> create mode 100644 Documentation/devicetree/bindings/mips/cavium/mdio.txt
> create mode 100644 Documentation/devicetree/bindings/mips/cavium/mix.txt
> create mode 100644 Documentation/devicetree/bindings/mips/cavium/pip.txt
> create mode 100644 Documentation/devicetree/bindings/mips/cavium/twsi.txt
> create mode 100644 Documentation/devicetree/bindings/mips/cavium/uart.txt
> create mode 100644 Documentation/devicetree/bindings/mips/cavium/uctl.txt
> create mode 100644 arch/mips/cavium-octeon/.gitignore
> create mode 100644 arch/mips/cavium-octeon/octeon_3xxx.dts
Looks pretty good to me. A few comments below, but I'm okay with this
one being picked up (Ralf, or if you prefer then I can merge it via my
tree) as long as you follow it up with a fixup patch.
g.
>
> diff --git a/Documentation/devicetree/bindings/mips/cavium/bootbus.txt b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
> new file mode 100644
> index 0000000..221c118
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
> @@ -0,0 +1,37 @@
> +* Boot Bus
> +
> +Properties:
> +- compatible: "cavium,octeon-3860-bootbus"
> +
> + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
> +
> +- reg: The base address of the CIU's register bank.
> +
> +- #address-cells: Must be <2>. The first cell is the chip select
> + within the bootbus. The second cell is the offset from the chip select.
> +
> +- #size-cells: Must be <1>.
> +
> +- ranges: There must be one one triplet of (child-bus-address,
> + parent-bus-address, length) for each active chip select.
> +
> +Example:
> + bootbus@...0000000000 {
> + compatible = "cavium,octeon-3860-bootbus";
> + reg = <0x11800 0x00000000 0x0 0x200>;
> + /* The chip select number and offset */
> + #address-cells = <2>;
> + /* The size of the chip select region */
> + #size-cells = <1>;
> + ranges = <0 0 0x0 0x1f400000 0x1000000>,
> + <1 0 0x1 0x30000000 0x10000000>,
> + <2 0 0x1 0x40000000 0x10000000>,
> + <3 0 0x1 0x50000000 0x10000000>,
> + <4 0 0x1 0x60000000 0x10000000>,
> + <5 0 0x1 0x70000000 0x10000000>,
> + <6 0 0x1 0x80000000 0x10000000>,
> + <7 0 0x1 0x90000000 0x10000000>;
> + .
> + .
> + .
> + };
> diff --git a/Documentation/devicetree/bindings/mips/cavium/ciu.txt b/Documentation/devicetree/bindings/mips/cavium/ciu.txt
> new file mode 100644
> index 0000000..c8ff212
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cavium/ciu.txt
> @@ -0,0 +1,26 @@
> +* Central Interrupt Unit
> +
> +Properties:
> +- compatible: "cavium,octeon-3860-ciu"
> +
> + Compatibility with all cn3XXX, cn5XXX and cn63XX SOCs.
> +
> +- interrupt-controller: This is an interrupt controller.
> +
> +- reg: The base address of the CIU's register bank.
> +
> +- #interrupt-cells: Must be <2>. The first cell is the bank within
> + the CIU and may have a value of 0 or 1. The second cell is the bit
> + within the bank and may have a value between 0 and 63.
> +
> +Example:
> + interrupt-controller@...0000000000 {
> + compatible = "cavium,octeon-3860-ciu";
> + interrupt-controller;
> + /* Interrupts are specified by two parts:
> + * 1) Controller register (0 or 1)
> + * 2) Bit within the register (0..63)
> + */
Are there any configuration parameters for these irq inputs? Edge vs.
Level? Active high or active low? If so, then you'll probably want to
have a flags cell.
Also, how are the irqs typically documented in the hardware reference
manual? Are they documented a irqs 0-63 in bank 1 and 0-63 in bank 2?
Or are is a flat 0-127 number range? If it is the later, then you may
want to consider just using a single cell to specify the irq number,
and handle the bank calculation in the irq driver.
> + #interrupt-cells = <2>;
> + reg = <0x10700 0x00000000 0x0 0x7000>;
> + };
> diff --git a/Documentation/devicetree/bindings/mips/cavium/gpio.txt b/Documentation/devicetree/bindings/mips/cavium/gpio.txt
> new file mode 100644
> index 0000000..72853d4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cavium/gpio.txt
> @@ -0,0 +1,48 @@
> +* General Purpose Input Output (GPIO) bus.
> +
> +Properties:
> +- compatible: "cavium,octeon-3860-gpio"
> +
> + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
> +
> +- reg: The base address of the GPIO unit's register bank.
> +
> +- gpio-controller: This is a GPIO controller.
> +
> +- #gpio-cells: Must be <2>. The first cell is the GPIO pin.
> +
> +- interrupt-controller: The GPIO controller is also an interrupt
> + controller, any of its pins may be configured as an interrupt
> + source.
> +
> +- #interrupt-cells: Must be <2>. The first cell is the GPIO pin
> + connected to the interrupt source. The second cell is the interrupt
> + triggering protocol and may have one of four values:
> + 0 - level triggered active high.
> + 1 - level triggered active low
> + 2 - edge triggered on the rising edge.
> + 3 - edge triggered on the falling edge.
Since you're choosing arbitrary values here anyway, it's convenient to
follow the lead of include/linux/irq.h and using 1->edge rising,
2->edge falling, 4->level high, 8->level low. In the past every irq
controller kind of did it's own thing, but that's not very scalable.
> +
> +- interrupts: Interrupt routing for pin 0. The remaining pins are
> + also routed, but in a manner that can be derived from the pin0
> + routing, so they are not specified.
> +
> +Example:
> +
> + gpio-controller@...0000000800 {
> + #gpio-cells = <2>;
> + compatible = "cavium,octeon-3860-gpio";
> + reg = <0x10700 0x00000800 0x0 0x100>;
> + gpio-controller;
> + /* Interrupts are specified by two parts:
> + * 1) GPIO pin number (0..15)
> + * 2) Triggering (0 - level active high
> + * 1 - level active low
> + * 2 - edge rising
> + * 3 - edge falling
> + */
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + /* The GPIO pin connect to 16 consecutive CUI bits */
> + interrupts = <0 16>;
> + };
> diff --git a/Documentation/devicetree/bindings/mips/cavium/mdio.txt b/Documentation/devicetree/bindings/mips/cavium/mdio.txt
> new file mode 100644
> index 0000000..6253c3b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cavium/mdio.txt
> @@ -0,0 +1,27 @@
> +* System Management Interface (SMI) / MDIO
> +
> +Properties:
> +- compatible: "cavium,octeon-3860-mdio"
> +
> + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
> +
> +- reg: The base address of the MDIO bus controller register bank.
> +
> +- #address-cells: Must be <1>.
> +
> +- #size-cells: Must be <0>. MDIO addresses have no size component.
> +
> +Typically an MDIO bus might have several children.
> +
> +Example:
> + mdio@...0000001800 {
> + compatible = "cavium,octeon-3860-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x11800 0x00001800 0x0 0x40>;
> +
> + ethernet-phy@0 {
> + ...
> + reg = <0>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/mips/cavium/mix.txt b/Documentation/devicetree/bindings/mips/cavium/mix.txt
> new file mode 100644
> index 0000000..2a91a33
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cavium/mix.txt
> @@ -0,0 +1,40 @@
> +* MIX Ethernet controller.
> +
> +Properties:
> +- compatible: "cavium,octeon-5750-mix"
> +
> + Compatibility with all cn5XXX and cn6XXX SOCs populated with MIX
> + devices.
> +
> +- reg: The base addresses of four seperate register banks. The first
> + bank contains the MIX registers. The second bank the corresponding
> + AGL registers. The third bank are the AGL registers shared by all
> + MIX devices present. The fourth bank is the AGL_PRT_CTL shared by
> + all MIX devices present.
> +
> +- cell-index: A single cell specifying which portion of the shared
> + register banks corresponds to this MIX device.
> +
> +- interrupts: Two interrupt specifiers. The first is the MIX
> + interrupt routing and the second the routing for the AGL interrupts.
> +
> +- mac-address: Optional, the MAC address to assign to the device.
> +
> +- local-mac-address: Optional, the MAC address to assign to the device
> + if mac-address is not specified.
> +
> +- phy-handle: Optional, a phandle for the PHY device connected to this device.
> +
> +Example:
> + ethernet@...0000100800 {
> + compatible = "cavium,octeon-5750-mix";
> + reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */
> + <0x11800 0xE0000800 0x0 0x300>, /* AGL */
> + <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
> + <0x11800 0xE0002008 0x0 0x8>; /* AGL_PRT_CTL */
> + cell-index = <1>;
> + interrupts = <1 18>, < 1 46>;
> + local-mac-address = [ 00 0f b7 10 63 54 ];
> + phy-handle = <&phy1>;
> + };
> +
> diff --git a/Documentation/devicetree/bindings/mips/cavium/pip.txt b/Documentation/devicetree/bindings/mips/cavium/pip.txt
> new file mode 100644
> index 0000000..d4c53ba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cavium/pip.txt
> @@ -0,0 +1,98 @@
> +* PIP Ethernet nexus.
> +
> +The PIP Ethernet nexus can control several data packet input/output
> +devices. The devices have a two level grouping scheme. There may be
> +several interfaces, and each interface may have several ports. These
> +ports might be an individual Ethernet PHY.
> +
> +
> +Properties for the PIP nexus:
> +- compatible: "cavium,octeon-3860-pip"
> +
> + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
> +
> +- reg: The base address of the PIP's register bank.
> +
> +- #address-cells: Must be <1>.
> +
> +- #size-cells: Must be <0>.
> +
> +Properties for PIP interfaces which is a child the PIP nexus:
> +- compatible: "cavium,octeon-3860-pip-interface"
> +
> + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
> +
> +- reg: The interface number.
> +
> +- #address-cells: Must be <1>.
> +
> +- #size-cells: Must be <0>.
> +
> +Properties for PIP port which is a child the PIP interface:
> +- compatible: "cavium,octeon-3860-pip-port"
> +
> + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
> +
> +- reg: The port number within the interface group.
> +
> +- mac-address: Optional, the MAC address to assign to the device.
> +
> +- local-mac-address: Optional, the MAC address to assign to the device
> + if mac-address is not specified.
> +
> +- phy-handle: Optional, a phandle for the PHY device connected to this device.
> +
> +Example:
> +
> + pip@...00a0000000 {
> + compatible = "cavium,octeon-3860-pip";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x11800 0xa0000000 0x0 0x2000>;
> +
> + interface@0 {
> + compatible = "cavium,octeon-3860-pip-interface";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>; /* interface */
> +
> + ethernet@0 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x0>; /* Port */
> + local-mac-address = [ 00 0f b7 10 63 60 ];
> + phy-handle = <&phy2>;
> + };
> + ethernet@1 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x1>; /* Port */
> + local-mac-address = [ 00 0f b7 10 63 61 ];
> + phy-handle = <&phy3>;
> + };
> + ethernet@2 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x2>; /* Port */
> + local-mac-address = [ 00 0f b7 10 63 62 ];
> + phy-handle = <&phy4>;
> + };
> + ethernet@3 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x3>; /* Port */
> + local-mac-address = [ 00 0f b7 10 63 63 ];
> + phy-handle = <&phy5>;
> + };
> + };
> +
> + interface@1 {
> + compatible = "cavium,octeon-3860-pip-interface";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>; /* interface */
> +
> + ethernet@0 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x0>; /* Port */
> + local-mac-address = [ 00 0f b7 10 63 64 ];
> + phy-handle = <&phy6>;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/mips/cavium/twsi.txt b/Documentation/devicetree/bindings/mips/cavium/twsi.txt
> new file mode 100644
> index 0000000..6e57155
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cavium/twsi.txt
> @@ -0,0 +1,34 @@
> +* Two Wire Serial Interface (TWSI) / I2C
> +
> +- compatible: "cavium,octeon-3860-twsi"
> +
> + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
> +
> +- reg: The base address of the TWSI/I2C bus controller register bank.
> +
> +- #address-cells: Must be <1>.
> +
> +- #size-cells: Must be <0>. I2C addresses have no size component.
> +
> +- interrupts: A single interrupt specifier.
> +
> +- clock-rate: The I2C bus clock rate in Hz.
> +
> +Example:
> + twsi0: i2c@...0000001000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "cavium,octeon-3860-twsi";
> + reg = <0x11800 0x00001000 0x0 0x200>;
> + interrupts = <0 45>;
> + clock-rate = <100000>;
> +
> + rtc@68 {
> + compatible = "dallas,ds1337";
> + reg = <0x68>;
> + };
> + tmp@4c {
> + compatible = "ti,tmp421";
> + reg = <0x4c>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/mips/cavium/uart.txt b/Documentation/devicetree/bindings/mips/cavium/uart.txt
> new file mode 100644
> index 0000000..87a6c37
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cavium/uart.txt
> @@ -0,0 +1,19 @@
> +* Universal Asynchronous Receiver/Transmitter (UART)
> +
> +- compatible: "cavium,octeon-3860-uart"
> +
> + Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
> +
> +- reg: The base address of the UART register bank.
> +
> +- interrupts: A single interrupt specifier.
> +
> +- current-speed: Optional, the current bit rate in bits per second.
> +
> +Example:
> + uart1: serial@...0000000c00 {
> + compatible = "cavium,octeon-3860-uart","ns16550";
> + reg = <0x11800 0x00000c00 0x0 0x400>;
> + current-speed = <115200>;
> + interrupts = <0 35>;
> + };
> diff --git a/Documentation/devicetree/bindings/mips/cavium/uctl.txt b/Documentation/devicetree/bindings/mips/cavium/uctl.txt
> new file mode 100644
> index 0000000..5dabe02
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cavium/uctl.txt
> @@ -0,0 +1,47 @@
> +* UCTL USB controller glue
> +
> +Properties:
> +- compatible: "cavium,octeon-6335-uctl"
> +
> + Compatibility with all cn6XXX SOCs.
> +
> +- reg: The base address of the UCTL register bank.
> +
> +- #address-cells: Must be <2>.
> +
> +- #size-cells: Must be <2>.
> +
> +- ranges: Empty to signify direct mapping of the children.
> +
> +- refclk-frequency: A single cell containing the reference clock
> + frequency in Hz.
> +
> +- refclk-type: A string describing the reference clock connection
> + either "crystal" or "external".
> +
> +Example:
> + uctl@...006f000000 {
> + compatible = "cavium,octeon-6335-uctl";
> + reg = <0x11800 0x6f000000 0x0 0x100>;
> + ranges; /* Direct mapping */
> + #address-cells = <2>;
> + #size-cells = <2>;
> + /* 12MHz, 24MHz and 48MHz allowed */
> + refclk-frequency = <24000000>;
> + /* Either "crystal" or "external" */
> + refclk-type = "crystal";
> +
> + ehci@...0000000000 {
> + compatible = "cavium,octeon-6335-ehci","usb-ehci";
> + reg = <0x16f00 0x00000000 0x0 0x100>;
> + interrupts = <0 56>;
> + big-endian-regs;
> + };
> + ohci@...0000000400 {
> + compatible = "cavium,octeon-6335-ohci","usb-ohci";
> + reg = <0x16f00 0x00000400 0x0 0x100>;
> + interrupts = <0 56>;
> + big-endian-regs;
> + };
> + };
> +
> diff --git a/arch/mips/cavium-octeon/.gitignore b/arch/mips/cavium-octeon/.gitignore
> new file mode 100644
> index 0000000..39c9686
> --- /dev/null
> +++ b/arch/mips/cavium-octeon/.gitignore
> @@ -0,0 +1,2 @@
> +*.dtb.S
> +*.dtb
> diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
> index 19eb043..b8d4f63 100644
> --- a/arch/mips/cavium-octeon/Makefile
> +++ b/arch/mips/cavium-octeon/Makefile
> @@ -15,3 +15,16 @@ obj-y += octeon-memcpy.o
> obj-y += executive/
>
> obj-$(CONFIG_SMP) += smp.o
> +
> +DTS_FILES = octeon_3xxx.dts
> +DTB_FILES = $(patsubst %.dts, %.dtb, $(DTS_FILES))
> +
> +obj-y += $(patsubst %.dts, %.dtb.o, $(DTS_FILES))
> +
> +$(obj)/%.dtb: $(src)/%.dts
> + $(call cmd,dtc)
> +
> +# Let's keep the .dtb files around in case we want to look at them.
> +.SECONDARY: $(addprefix $(obj)/, $(DTB_FILES))
> +
> +clean-files += $(DTB_FILES) $(patsubst %.dtb, %.dtb.S, $(DTB_FILES))
> diff --git a/arch/mips/cavium-octeon/octeon_3xxx.dts b/arch/mips/cavium-octeon/octeon_3xxx.dts
> new file mode 100644
> index 0000000..2b371dc
> --- /dev/null
> +++ b/arch/mips/cavium-octeon/octeon_3xxx.dts
> @@ -0,0 +1,375 @@
> +/dts-v1/;
> +/*
> + * OCTEON 3XXX, 5XXX, 63XX device tree skeleton.
> + *
> + * This device tree is pruned and patched by early boot code before
> + * use. Because of this, it contains a super-set of the available
> + * devices and properties.
> + */
> +/ {
> + compatible = "cavium,octeon-3860";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&ciu>;
> +
> + soc@0 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges; /* Direct mapping */
> +
> + ciu: interrupt-controller@...0000000000 {
> + compatible = "cavium,octeon-3860-ciu";
> + interrupt-controller;
> + /* Interrupts are specified by two parts:
> + * 1) Controller register (0 or 1)
> + * 2) Bit within the register (0..63)
> + */
> + #interrupt-cells = <2>;
> + reg = <0x10700 0x00000000 0x0 0x7000>;
> + };
> +
> + gpio: gpio-controller@...0000000800 {
> + #gpio-cells = <2>;
> + compatible = "cavium,octeon-3860-gpio";
> + reg = <0x10700 0x00000800 0x0 0x100>;
> + gpio-controller;
> + /* Interrupts are specified by two parts:
> + * 1) GPIO pin number (0..15)
> + * 2) Triggering (0 - level active high
> + * 1 - level active low
> + * 2 - edge rising
> + * 3 - edge falling
> + */
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + /* The GPIO pin connect to 16 consecutive CUI bits */
> + interrupts = <0 16>; /* <0 17> <0 18> <0 19>
> + <0 20> <0 21> <0 22> <0 23>
> + <0 24> <0 25> <0 26> <0 27>
> + <0 28> <0 29> <0 30> <0 31>; */
> + };
> +
> + smi0: mdio@...0000001800 {
> + compatible = "cavium,octeon-3860-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x11800 0x00001800 0x0 0x40>;
> +
> + phy0: ethernet-phy@0 {
> + compatible = "broadcom,bcm5241";
> + reg = <0>;
> + };
> +
> + phy1: ethernet-phy@1 {
> + compatible = "broadcom,bcm5241";
> + reg = <1>;
> + };
> +
> + phy2: ethernet-phy@2 {
> + reg = <2>;
> + compatible = "marvell,88e1149r";
> + marvell,reg-init = <3 0x10 0 0x5777>,
> + <3 0x11 0 0x00aa>,
> + <3 0x12 0 0x4105>,
> + <3 0x13 0 0x0a60>;
> + interrupt-parent = <&gpio>;
> + interrupts = <5 1>; /* Pin 5, active low */
> + };
> + phy3: ethernet-phy@3 {
> + reg = <3>;
> + compatible = "marvell,88e1149r";
> + marvell,reg-init = <3 0x10 0 0x5777>,
> + <3 0x11 0 0x00aa>,
> + <3 0x12 0 0x4105>,
> + <3 0x13 0 0x0a60>;
> + interrupt-parent = <&gpio>;
> + interrupts = <5 1>; /* Pin 5, active low */
> + };
> + phy4: ethernet-phy@4 {
> + reg = <4>;
> + compatible = "marvell,88e1149r";
> + marvell,reg-init = <3 0x10 0 0x5777>,
> + <3 0x11 0 0x00aa>,
> + <3 0x12 0 0x4105>,
> + <3 0x13 0 0x0a60>;
> + interrupt-parent = <&gpio>;
> + interrupts = <5 1>; /* Pin 5, active low */
> + };
> + phy5: ethernet-phy@5 {
> + reg = <5>;
> + compatible = "marvell,88e1149r";
> + marvell,reg-init = <3 0x10 0 0x5777>,
> + <3 0x11 0 0x00aa>,
> + <3 0x12 0 0x4105>,
> + <3 0x13 0 0x0a60>;
> + interrupt-parent = <&gpio>;
> + interrupts = <5 1>; /* Pin 5, active low */
> + };
> +
> + phy6: ethernet-phy@6 {
> + reg = <6>;
> + compatible = "marvell,88e1149r";
> + marvell,reg-init = <3 0x10 0 0x5777>,
> + <3 0x11 0 0x00aa>,
> + <3 0x12 0 0x4105>,
> + <3 0x13 0 0x0a60>;
> + };
> + phy7: ethernet-phy@7 {
> + reg = <7>;
> + compatible = "marvell,88e1149r";
> + marvell,reg-init = <3 0x10 0 0x5777>,
> + <3 0x11 0 0x00aa>,
> + <3 0x12 0 0x4105>,
> + <3 0x13 0 0x0a60>;
> + };
> + phy8: ethernet-phy@8 {
> + reg = <8>;
> + compatible = "marvell,88e1149r";
> + marvell,reg-init = <3 0x10 0 0x5777>,
> + <3 0x11 0 0x00aa>,
> + <3 0x12 0 0x4105>,
> + <3 0x13 0 0x0a60>;
> + };
> + phy9: ethernet-phy@9 {
> + reg = <9>;
> + compatible = "marvell,88e1149r";
> + marvell,reg-init = <3 0x10 0 0x5777>,
> + <3 0x11 0 0x00aa>,
> + <3 0x12 0 0x4105>,
> + <3 0x13 0 0x0a60>;
> + };
> + };
> +
> + smi1: mdio@...0000001900 {
> + compatible = "cavium,octeon-3860-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x11800 0x00001900 0x0 0x40>;
> + };
> +
> + mix0: ethernet@...0000100000 {
> + compatible = "cavium,octeon-5750-mix";
> + reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
> + <0x11800 0xE0000000 0x0 0x300>, /* AGL */
> + <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
> + <0x11800 0xE0002000 0x0 0x8>; /* AGL_PRT_CTL */
> + cell-index = <0>;
> + interrupts = <0 62>, <1 46>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + phy-handle = <&phy0>;
> + };
> +
> + mix1: ethernet@...0000100800 {
> + compatible = "cavium,octeon-5750-mix";
> + reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */
> + <0x11800 0xE0000800 0x0 0x300>, /* AGL */
> + <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
> + <0x11800 0xE0002008 0x0 0x8>; /* AGL_PRT_CTL */
> + cell-index = <1>;
> + interrupts = <1 18>, < 1 46>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + phy-handle = <&phy1>;
> + };
> +
> + pip: pip@...00a0000000 {
> + compatible = "cavium,octeon-3860-pip";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x11800 0xa0000000 0x0 0x2000>;
> +
> + interface@0 {
> + compatible = "cavium,octeon-3860-pip-interface";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>; /* interface */
> +
> + ethernet@0 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x0>; /* Port */
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + phy-handle = <&phy2>;
> + };
> + ethernet@1 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x1>; /* Port */
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + phy-handle = <&phy3>;
> + };
> + ethernet@2 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x2>; /* Port */
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + phy-handle = <&phy4>;
> + };
> + ethernet@3 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x3>; /* Port */
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + phy-handle = <&phy5>;
> + };
> + };
> +
> + interface@1 {
> + compatible = "cavium,octeon-3860-pip-interface";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>; /* interface */
> +
> + ethernet@0 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x0>; /* Port */
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + phy-handle = <&phy6>;
> + };
> + ethernet@1 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x1>; /* Port */
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + phy-handle = <&phy7>;
> + };
> + ethernet@2 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x2>; /* Port */
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + phy-handle = <&phy8>;
> + };
> + ethernet@3 {
> + compatible = "cavium,octeon-3860-pip-port";
> + reg = <0x3>; /* Port */
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + phy-handle = <&phy9>;
> + };
> + };
> + };
> +
> + twsi0: i2c@...0000001000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "cavium,octeon-3860-twsi";
> + reg = <0x11800 0x00001000 0x0 0x200>;
> + interrupts = <0 45>;
> + clock-rate = <100000>;
> +
> + rtc@68 {
> + compatible = "dallas,ds1337";
> + reg = <0x68>;
> + };
> + tmp@4c {
> + compatible = "ti,tmp421";
> + reg = <0x4c>;
> + };
> + };
> +
> + twsi1: i2c@...0000001200 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "cavium,octeon-3860-twsi";
> + reg = <0x11800 0x00001200 0x0 0x200>;
> + interrupts = <0 59>;
> + clock-rate = <100000>;
> + };
> +
> + uart0: serial@...0000000800 {
> + compatible = "cavium,octeon-3860-uart","ns16550";
> + reg = <0x11800 0x00000800 0x0 0x400>;
> + clock-frequency = <0>;
> + current-speed = <115200>;
> + reg-shift = <3>;
> + interrupts = <0 34>;
> + };
> +
> + uart1: serial@...0000000c00 {
> + compatible = "cavium,octeon-3860-uart","ns16550";
> + reg = <0x11800 0x00000c00 0x0 0x400>;
> + clock-frequency = <0>;
> + current-speed = <115200>;
> + reg-shift = <3>;
> + interrupts = <0 35>;
> + };
> +
> + uart2: serial@...0000000400 {
> + compatible = "cavium,octeon-3860-uart","ns16550";
> + reg = <0x11800 0x00000400 0x0 0x400>;
> + clock-frequency = <0>;
> + current-speed = <115200>;
> + reg-shift = <3>;
> + interrupts = <1 16>;
> + };
> +
> + bootbus: bootbus@...0000000000 {
> + compatible = "cavium,octeon-3860-bootbus";
> + reg = <0x11800 0x00000000 0x0 0x200>;
> + /* The chip select number and offset */
> + #address-cells = <2>;
> + /* The size of the chip select region */
> + #size-cells = <1>;
> + ranges = <0 0 0x0 0x1f400000 0x1000000>,
> + <1 0 0x1 0x30000000 0x10000000>,
> + <2 0 0x1 0x40000000 0x10000000>,
> + <3 0 0x1 0x50000000 0x10000000>,
> + <4 0 0x1 0x60000000 0x10000000>,
> + <5 0 0x1 0x70000000 0x10000000>,
> + <6 0 0x1 0x80000000 0x10000000>,
> + <7 0 0x1 0x90000000 0x10000000>;
> +
> + flash0: nor@0,0 {
> + compatible = "cfi-flash";
> + reg = <0 0 0x800000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "firmware";
> + reg = <0x0 0x400000>;
> + read-only;
> + };
> +
> + partition@...000 {
> + label = "data";
> + reg = <0x400000 0x400000>;
> + read-only;
> + };
> + };
> + };
> +
> + uctl: uctl@...006f000000 {
> + compatible = "cavium,octeon-6335-uctl";
> + reg = <0x11800 0x6f000000 0x0 0x100>;
> + ranges; /* Direct mapping */
> + #address-cells = <2>;
> + #size-cells = <2>;
> + /* 12MHz, 24MHz and 48MHz allowed */
> + refclk-frequency = <24000000>;
> + /* Either "crystal" or "external" */
> + refclk-type = "crystal";
> +
> + ehci@...0000000000 {
> + compatible = "cavium,octeon-6335-ehci","usb-ehci";
> + reg = <0x16f00 0x00000000 0x0 0x100>;
> + interrupts = <0 56>;
> + big-endian-regs;
> + };
> + ohci@...0000000400 {
> + compatible = "cavium,octeon-6335-ohci","usb-ohci";
> + reg = <0x16f00 0x00000400 0x0 0x100>;
> + interrupts = <0 56>;
> + big-endian-regs;
> + };
> + };
> + };
> +
> + aliases {
> + mix0 = &mix0;
> + mix1 = &mix1;
> + pip = &pip;
> + smi0 = &smi0;
> + smi1 = &smi1;
> + twsi0 = &twsi0;
> + twsi1 = &twsi1;
> + uart0 = &uart0;
> + uart1 = &uart1;
> + uart2 = &uart2;
> + flash0 = &flash0;
> + };
> + };
> --
> 1.7.2.3
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists