| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20110527195008.GA5092@tuxdriver.com>
Date: Fri, 27 May 2011 15:50:08 -0400
From: "John W. Linville" <linville@...driver.com>
To: davem@...emloft.net
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: pull request: wireless-2.6 2011-05-27
Dave,
This is a quick batch of fixes intended for 2.6.40. They are all
small(-ish), and several of them fix either build breakage or some
sort of regression. At least one fixes an uninitialized variable
that could potentially cause a crash.
Please let me know if there are problems!
Thanks,
John
---
The following changes since commit c5c177b4aca83338781e72be2e6dd1601c560cb3:
net: Kill ratelimit.h dependency in linux/net.h (2011-05-27 13:41:33 -0400)
are available in the git repository at:
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git for-davem
Adrian Chadd (1):
ath9k: Fix AR9287 calibration
Eliad Peller (1):
mac80211: clear local->ps_data on disassoc
Jesper Juhl (1):
mac80211: Remove duplicate linux/slab.h include from net/mac80211/scan.c
John W. Linville (1):
Merge git://git.kernel.org/.../linville/wireless-next-2.6 into for-davem
Larry Finger (2):
rtlwifi: Fix kernel panic resulting from RX buffer allocation failure
rtlwifi: Use order 2 RX buffer allocation only if necessary
Luciano Coelho (1):
nl80211: fix check for valid SSID size in scan operations
Rafał Miłecki (1):
b43: N-PHY: initialize last var in calibration function
Rajkumar Manoharan (4):
ath9k: Reset chip on baseband hang
ath9k_hw: disable phy restart on baseband panic caused by RXSM
ath9k: set 40 Mhz rate only if hw is configured in ht40
mac80211: stop queues before rate control updation
Stanislaw Gruszka (1):
iwl4965: fix 5GHz operation
Tao Ma (1):
wireless: Default to 'n' for 2 new added devices in Kconfig.
Yogesh Ashok Powar (1):
mwifiex: correct event header length
drivers/net/wireless/ath/ath9k/Kconfig | 1 -
drivers/net/wireless/ath/ath9k/ar9002_calib.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 22 +++++++++++++++
drivers/net/wireless/ath/ath9k/hw.c | 5 +++-
drivers/net/wireless/ath/ath9k/hw.h | 2 +
drivers/net/wireless/ath/ath9k/main.c | 4 ++-
drivers/net/wireless/ath/ath9k/rc.c | 3 +-
drivers/net/wireless/b43/phy_n.c | 2 +-
drivers/net/wireless/iwlegacy/iwl-4965-lib.c | 4 +-
drivers/net/wireless/mwifiex/sdio.h | 4 +-
drivers/net/wireless/rt2x00/Kconfig | 1 -
drivers/net/wireless/rtlwifi/pci.c | 35 +++++++++++++++---------
net/mac80211/mlme.c | 7 +++++
net/mac80211/scan.c | 1 -
net/wireless/nl80211.c | 4 +-
15 files changed, 70 insertions(+), 27 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index d9ff841..d9c08c6 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -26,7 +26,6 @@ config ATH9K
config ATH9K_PCI
bool "Atheros ath9k PCI/PCIe bus support"
depends on ATH9K && PCI
- default PCI
---help---
This option enables the PCI bus support in ath9k.
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index 015d974..2d4c091 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -829,7 +829,7 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
if (AR_SREV_9271(ah)) {
if (!ar9285_hw_cl_cal(ah, chan))
return false;
- } else if (AR_SREV_9285_12_OR_LATER(ah)) {
+ } else if (AR_SREV_9285(ah) && AR_SREV_9285_12_OR_LATER(ah)) {
if (!ar9285_hw_clc(ah, chan))
return false;
} else {
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index eee23ec..892c48b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -1381,3 +1381,25 @@ void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah)
"==== BB update: done ====\n\n");
}
EXPORT_SYMBOL(ar9003_hw_bb_watchdog_dbg_info);
+
+void ar9003_hw_disable_phy_restart(struct ath_hw *ah)
+{
+ u32 val;
+
+ /* While receiving unsupported rate frame rx state machine
+ * gets into a state 0xb and if phy_restart happens in that
+ * state, BB would go hang. If RXSM is in 0xb state after
+ * first bb panic, ensure to disable the phy_restart.
+ */
+ if (!((MS(ah->bb_watchdog_last_status,
+ AR_PHY_WATCHDOG_RX_OFDM_SM) == 0xb) ||
+ ah->bb_hang_rx_ofdm))
+ return;
+
+ ah->bb_hang_rx_ofdm = true;
+ val = REG_READ(ah, AR_PHY_RESTART);
+ val &= ~AR_PHY_RESTART_ENA;
+
+ REG_WRITE(ah, AR_PHY_RESTART, val);
+}
+EXPORT_SYMBOL(ar9003_hw_disable_phy_restart);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 72543ce..1be7c8b 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1555,9 +1555,12 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
if (ah->btcoex_hw.enabled)
ath9k_hw_btcoex_enable(ah);
- if (AR_SREV_9300_20_OR_LATER(ah))
+ if (AR_SREV_9300_20_OR_LATER(ah)) {
ar9003_hw_bb_watchdog_config(ah);
+ ar9003_hw_disable_phy_restart(ah);
+ }
+
ath9k_hw_apply_gpio_override(ah);
return 0;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 57435ce..4b157c5 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -842,6 +842,7 @@ struct ath_hw {
u32 bb_watchdog_last_status;
u32 bb_watchdog_timeout_ms; /* in ms, 0 to disable */
+ u8 bb_hang_rx_ofdm; /* true if bb hang due to rx_ofdm */
unsigned int paprd_target_power;
unsigned int paprd_training_power;
@@ -990,6 +991,7 @@ void ar9002_hw_enable_wep_aggregation(struct ath_hw *ah);
void ar9003_hw_bb_watchdog_config(struct ath_hw *ah);
void ar9003_hw_bb_watchdog_read(struct ath_hw *ah);
void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah);
+void ar9003_hw_disable_phy_restart(struct ath_hw *ah);
void ar9003_paprd_enable(struct ath_hw *ah, bool val);
void ar9003_paprd_populate_single_table(struct ath_hw *ah,
struct ath9k_hw_cal_data *caldata,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index a198ee3..2ca351f 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -670,7 +670,8 @@ void ath9k_tasklet(unsigned long data)
u32 status = sc->intrstatus;
u32 rxmask;
- if (status & ATH9K_INT_FATAL) {
+ if ((status & ATH9K_INT_FATAL) ||
+ (status & ATH9K_INT_BB_WATCHDOG)) {
ath_reset(sc, true);
return;
}
@@ -737,6 +738,7 @@ irqreturn_t ath_isr(int irq, void *dev)
{
#define SCHED_INTR ( \
ATH9K_INT_FATAL | \
+ ATH9K_INT_BB_WATCHDOG | \
ATH9K_INT_RXORN | \
ATH9K_INT_RXEOL | \
ATH9K_INT_RX | \
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 1754221..ba7f36a 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -689,7 +689,8 @@ static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table,
if (WLAN_RC_PHY_HT(rate_table->info[rix].phy)) {
rate->flags |= IEEE80211_TX_RC_MCS;
- if (WLAN_RC_PHY_40(rate_table->info[rix].phy))
+ if (WLAN_RC_PHY_40(rate_table->info[rix].phy) &&
+ conf_is_ht40(&txrc->hw->conf))
rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
if (WLAN_RC_PHY_SGI(rate_table->info[rix].phy))
rate->flags |= IEEE80211_TX_RC_SHORT_GI;
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 9ed6515..05960dd 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -3093,7 +3093,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
int freq;
bool avoid = false;
u8 length;
- u16 tmp, core, type, count, max, numb, last, cmd;
+ u16 tmp, core, type, count, max, numb, last = 0, cmd;
const u16 *table;
bool phy6or5x;
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c
index 7e5e85a..a7a4739 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c
@@ -628,11 +628,11 @@ void iwl4965_rx_reply_rx(struct iwl_priv *priv,
/* rx_status carries information about the packet to mac80211 */
rx_status.mactime = le64_to_cpu(phy_res->timestamp);
+ rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
+ IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
rx_status.freq =
ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel),
rx_status.band);
- rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
- IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
rx_status.rate_idx =
iwl4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
rx_status.flag = 0;
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index a0e9bc5..4e97e90 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -167,8 +167,8 @@
/* Rx unit register */
#define CARD_RX_UNIT_REG 0x63
-/* Event header Len*/
-#define MWIFIEX_EVENT_HEADER_LEN 8
+/* Event header len w/o 4 bytes of interface header */
+#define MWIFIEX_EVENT_HEADER_LEN 4
/* Max retry number of CMD53 write */
#define MAX_WRITE_IOMEM_RETRY 2
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 9def1e5..b2f8b8f 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -166,7 +166,6 @@ config RT2800USB_RT35XX
config RT2800USB_RT53XX
bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)"
depends on EXPERIMENTAL
- default y
---help---
This adds support for rt53xx wireless chipset family to the
rt2800pci driver.
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index a409528..89100e7 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -669,11 +669,6 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
&rx_status,
(u8 *) pdesc, skb);
- pci_unmap_single(rtlpci->pdev,
- *((dma_addr_t *) skb->cb),
- rtlpci->rxbuffersize,
- PCI_DMA_FROMDEVICE);
-
skb_put(skb, rtlpriv->cfg->ops->get_desc((u8 *) pdesc,
false,
HW_DESC_RXPKT_LEN));
@@ -690,6 +685,21 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
hdr = rtl_get_hdr(skb);
fc = rtl_get_fc(skb);
+ /* try for new buffer - if allocation fails, drop
+ * frame and reuse old buffer
+ */
+ new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
+ if (unlikely(!new_skb)) {
+ RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV),
+ DBG_DMESG,
+ ("can't alloc skb for rx\n"));
+ goto done;
+ }
+ pci_unmap_single(rtlpci->pdev,
+ *((dma_addr_t *) skb->cb),
+ rtlpci->rxbuffersize,
+ PCI_DMA_FROMDEVICE);
+
if (!stats.crc || !stats.hwerror) {
memcpy(IEEE80211_SKB_RXCB(skb), &rx_status,
sizeof(rx_status));
@@ -758,15 +768,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
rtl_lps_leave(hw);
}
- new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
- if (unlikely(!new_skb)) {
- RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV),
- DBG_DMESG,
- ("can't alloc skb for rx\n"));
- goto done;
- }
skb = new_skb;
- /*skb->dev = dev; */
rtlpci->rx_ring[rx_queue_idx].rx_buf[rtlpci->
rx_ring
@@ -1113,6 +1115,13 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw)
rtlpci->rx_ring[rx_queue_idx].idx = 0;
+ /* If amsdu_8k is disabled, set buffersize to 4096. This
+ * change will reduce memory fragmentation.
+ */
+ if (rtlpci->rxbuffersize > 4096 &&
+ rtlpriv->rtlhal.disable_amsdu_8k)
+ rtlpci->rxbuffersize = 4096;
+
for (i = 0; i < rtlpci->rxringcount; i++) {
struct sk_buff *skb =
dev_alloc_skb(rtlpci->rxbuffersize);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 4f6b267..456cccf 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -232,6 +232,9 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
WARN_ON(!ieee80211_set_channel_type(local, sdata, channel_type));
}
+ ieee80211_stop_queues_by_reason(&sdata->local->hw,
+ IEEE80211_QUEUE_STOP_REASON_CSA);
+
/* channel_type change automatically detected */
ieee80211_hw_config(local, 0);
@@ -245,6 +248,9 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
rcu_read_unlock();
}
+ ieee80211_wake_queues_by_reason(&sdata->local->hw,
+ IEEE80211_QUEUE_STOP_REASON_CSA);
+
ht_opmode = le16_to_cpu(hti->operation_mode);
/* if bss configuration changed store the new one */
@@ -1089,6 +1095,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
local->hw.conf.flags &= ~IEEE80211_CONF_PS;
config_changed |= IEEE80211_CONF_CHANGE_PS;
}
+ local->ps_sdata = NULL;
ieee80211_hw_config(local, config_changed);
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 27af672..58ffa7d 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -15,7 +15,6 @@
#include <linux/if_arp.h>
#include <linux/rtnetlink.h>
#include <linux/pm_qos_params.h>
-#include <linux/slab.h>
#include <net/sch_generic.h>
#include <linux/slab.h>
#include <net/mac80211.h>
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ec83f41..88a565f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3406,12 +3406,12 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
i = 0;
if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) {
+ request->ssids[i].ssid_len = nla_len(attr);
if (request->ssids[i].ssid_len > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out_free;
}
memcpy(request->ssids[i].ssid, nla_data(attr), nla_len(attr));
- request->ssids[i].ssid_len = nla_len(attr);
i++;
}
}
@@ -3572,6 +3572,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS],
tmp) {
+ request->ssids[i].ssid_len = nla_len(attr);
if (request->ssids[i].ssid_len >
IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
@@ -3579,7 +3580,6 @@ static int nl80211_start_sched_scan(struct sk_buff *skb,
}
memcpy(request->ssids[i].ssid, nla_data(attr),
nla_len(attr));
- request->ssids[i].ssid_len = nla_len(attr);
i++;
}
}
--
John W. Linville Someday the world will need a hero, and you
linville@...driver.com might be all we have. Be ready.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists