| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <ab5842ae2ac57f4004c3e86fdb9234451b1f4ac2.1306851090.git.luto@mit.edu>
Date: Tue, 31 May 2011 10:14:06 -0400
From: Andy Lutomirski <luto@....EDU>
To: Ingo Molnar <mingo@...e.hu>, x86@...nel.org
Cc: Thomas Gleixner <tglx@...utronix.de>, linux-kernel@...r.kernel.org,
Jesper Juhl <jj@...osbits.net>, Borislav Petkov <bp@...en8.de>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Arjan van de Ven <arjan@...radead.org>,
Jan Beulich <JBeulich@...ell.com>,
richard -rw- weinberger <richard.weinberger@...il.com>,
Mikael Pettersson <mikpe@...uu.se>,
Andi Kleen <andi@...stfloor.org>,
Andy Lutomirski <luto@....edu>
Subject: [PATCH v4 08/10] x86-64: Emulate legacy vsyscalls
There's a fair amount of code in the vsyscall page. It contains a
syscall instruction (in the gettimeofday fallback) and who knows
what will happen if an exploit jumps into the middle of some other
code.
Reduce the risk by replacing the vsyscalls with short magic
incantations that cause the kernel to emulate the real vsyscalls.
These incantations are useless if entered in the middle.
This causes vsyscalls to be a little more expensive than real
syscalls. Fortunately sensible programs don't use them.
Less fortunately, current glibc uses the vsyscall for time() even in
dynamic binaries. So there's a CONFIG_UNSAFE_VSYSCALLS (default y)
option that leaves in the native code for time(). That should go
away in awhile when glibc gets fixed.
Some care is taken to make sure that tools like valgrind and
ThreadSpotter still work.
This patch is not perfect: the vread_tsc and vread_hpet functions
are still at a fixed address. Fixing that might involve making
alternative patching work in the vDSO.
Signed-off-by: Andy Lutomirski <luto@....edu>
---
arch/x86/Kconfig | 17 +++
arch/x86/include/asm/irq_vectors.h | 6 +-
arch/x86/include/asm/traps.h | 4 +
arch/x86/include/asm/vsyscall.h | 6 +
arch/x86/kernel/Makefile | 1 +
arch/x86/kernel/entry_64.S | 2 +
arch/x86/kernel/traps.c | 4 +
arch/x86/kernel/vsyscall_64.c | 253 +++++++++++++++++++++---------------
arch/x86/kernel/vsyscall_emu_64.S | 42 ++++++
9 files changed, 231 insertions(+), 104 deletions(-)
create mode 100644 arch/x86/kernel/vsyscall_emu_64.S
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index da34972..79e5d8a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1646,6 +1646,23 @@ config COMPAT_VDSO
If unsure, say Y.
+config UNSAFE_VSYSCALLS
+ def_bool y
+ prompt "Unsafe fast legacy vsyscalls"
+ depends on X86_64
+ ---help---
+ Legacy user code expects to be able to issue three syscalls
+ by calling fixed addresses in kernel space. If you say N,
+ then the kernel traps and emulates these calls. If you say
+ Y, then there is actual executable code at a fixed address
+ to implement time() efficiently.
+
+ On a system with recent enough glibc (probably 2.14 or
+ newer) and no static binaries, you can say N without a
+ performance penalty to improve security
+
+ If unsure, say Y.
+
config CMDLINE_BOOL
bool "Built-in kernel command line"
---help---
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 6e976ee..a563c50 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -17,7 +17,8 @@
* Vectors 0 ... 31 : system traps and exceptions - hardcoded events
* Vectors 32 ... 127 : device interrupts
* Vector 128 : legacy int80 syscall interface
- * Vectors 129 ... INVALIDATE_TLB_VECTOR_START-1 : device interrupts
+ * Vector 204 : legacy x86_64 vsyscall emulation
+ * Vectors 129 ... INVALIDATE_TLB_VECTOR_START-1 except 204 : device interrupts
* Vectors INVALIDATE_TLB_VECTOR_START ... 255 : special interrupts
*
* 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table.
@@ -50,6 +51,9 @@
#ifdef CONFIG_X86_32
# define SYSCALL_VECTOR 0x80
#endif
+#ifdef CONFIG_X86_64
+# define VSYSCALL_EMU_VECTOR 0xcc
+#endif
/*
* Vectors 0x30-0x3f are used for ISA interrupts.
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index 0310da6..2bae0a5 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -1,6 +1,8 @@
#ifndef _ASM_X86_TRAPS_H
#define _ASM_X86_TRAPS_H
+#include <linux/kprobes.h>
+
#include <asm/debugreg.h>
#include <asm/siginfo.h> /* TRAP_TRACE, ... */
@@ -38,6 +40,7 @@ asmlinkage void alignment_check(void);
asmlinkage void machine_check(void);
#endif /* CONFIG_X86_MCE */
asmlinkage void simd_coprocessor_error(void);
+asmlinkage void emulate_vsyscall(void);
dotraplinkage void do_divide_error(struct pt_regs *, long);
dotraplinkage void do_debug(struct pt_regs *, long);
@@ -64,6 +67,7 @@ dotraplinkage void do_alignment_check(struct pt_regs *, long);
dotraplinkage void do_machine_check(struct pt_regs *, long);
#endif
dotraplinkage void do_simd_coprocessor_error(struct pt_regs *, long);
+dotraplinkage void do_emulate_vsyscall(struct pt_regs *, long);
#ifdef CONFIG_X86_32
dotraplinkage void do_iret_error(struct pt_regs *, long);
#endif
diff --git a/arch/x86/include/asm/vsyscall.h b/arch/x86/include/asm/vsyscall.h
index d555973..293ae08 100644
--- a/arch/x86/include/asm/vsyscall.h
+++ b/arch/x86/include/asm/vsyscall.h
@@ -31,6 +31,12 @@ extern struct timezone sys_tz;
extern void map_vsyscall(void);
+/* Emulation */
+static inline bool in_vsyscall_page(unsigned long addr)
+{
+ return (addr & ~(PAGE_SIZE - 1)) == VSYSCALL_START;
+}
+
#endif /* __KERNEL__ */
#endif /* _ASM_X86_VSYSCALL_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 90b06d4..cc0469a 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -44,6 +44,7 @@ obj-y += probe_roms.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o vread_tsc_64.o
+obj-$(CONFIG_X86_64) += vsyscall_emu_64.o
obj-y += bootflag.o e820.o
obj-y += pci-dma.o quirks.o topology.o kdebugfs.o
obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 72c4a77..e949793 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1123,6 +1123,8 @@ zeroentry spurious_interrupt_bug do_spurious_interrupt_bug
zeroentry coprocessor_error do_coprocessor_error
errorentry alignment_check do_alignment_check
zeroentry simd_coprocessor_error do_simd_coprocessor_error
+zeroentry emulate_vsyscall do_emulate_vsyscall
+
/* Reload gs selector with exception handling */
/* edi: new selector */
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index b9b6716..72f0f6a 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -872,6 +872,10 @@ void __init trap_init(void)
set_bit(SYSCALL_VECTOR, used_vectors);
#endif
+ BUG_ON(test_bit(VSYSCALL_EMU_VECTOR, used_vectors));
+ set_system_intr_gate(VSYSCALL_EMU_VECTOR, &emulate_vsyscall);
+ set_bit(VSYSCALL_EMU_VECTOR, used_vectors);
+
/*
* Should be a barrier for any external CPU state:
*/
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index c7fe325..52ba392 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -32,6 +32,8 @@
#include <linux/cpu.h>
#include <linux/smp.h>
#include <linux/notifier.h>
+#include <linux/syscalls.h>
+#include <linux/ratelimit.h>
#include <asm/vsyscall.h>
#include <asm/pgtable.h>
@@ -44,10 +46,7 @@
#include <asm/desc.h>
#include <asm/topology.h>
#include <asm/vgtod.h>
-
-#define __vsyscall(nr) \
- __attribute__ ((unused, __section__(".vsyscall_" #nr))) notrace
-#define __syscall_clobber "r11","cx","memory"
+#include <asm/traps.h>
DEFINE_VVAR(int, vgetcpu_mode);
DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data) =
@@ -84,73 +83,45 @@ void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
}
-/* RED-PEN may want to readd seq locking, but then the variable should be
- * write-once.
- */
-static __always_inline void do_get_tz(struct timezone * tz)
+static void warn_bad_vsyscall(const char *level, struct pt_regs *regs,
+ const char *message)
{
- *tz = VVAR(vsyscall_gtod_data).sys_tz;
+ struct task_struct *tsk;
+ static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
+
+ if (!show_unhandled_signals || !__ratelimit(&rs))
+ return;
+
+ tsk = current;
+
+ printk("%s%s[%d] %s ip:%lx sp:%lx ax:%lx si:%lx di:%lx",
+ level, tsk->comm, task_pid_nr(tsk),
+ message,
+ regs->ip - 2, regs->sp, regs->ax, regs->si, regs->di);
+ if (!in_vsyscall_page(regs->ip - 2))
+ print_vma_addr(" in ", regs->ip - 2);
+ printk("\n");
}
-static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz)
-{
- int ret;
- asm volatile("syscall"
- : "=a" (ret)
- : "0" (__NR_gettimeofday),"D" (tv),"S" (tz)
- : __syscall_clobber );
- return ret;
-}
+/* al values for each vsyscall; see vsyscall_emu_64.S for why. */
+static u8 vsyscall_nr_to_al[] = {0xcc, 0xce, 0xf0};
-static __always_inline void do_vgettimeofday(struct timeval * tv)
+static int al_to_vsyscall_nr(u8 al)
{
- cycle_t now, base, mask, cycle_delta;
- unsigned seq;
- unsigned long mult, shift, nsec;
- cycle_t (*vread)(void);
- do {
- seq = read_seqbegin(&VVAR(vsyscall_gtod_data).lock);
-
- vread = VVAR(vsyscall_gtod_data).clock.vread;
- if (unlikely(!vread)) {
- gettimeofday(tv,NULL);
- return;
- }
-
- now = vread();
- base = VVAR(vsyscall_gtod_data).clock.cycle_last;
- mask = VVAR(vsyscall_gtod_data).clock.mask;
- mult = VVAR(vsyscall_gtod_data).clock.mult;
- shift = VVAR(vsyscall_gtod_data).clock.shift;
-
- tv->tv_sec = VVAR(vsyscall_gtod_data).wall_time_sec;
- nsec = VVAR(vsyscall_gtod_data).wall_time_nsec;
- } while (read_seqretry(&VVAR(vsyscall_gtod_data).lock, seq));
-
- /* calculate interval: */
- cycle_delta = (now - base) & mask;
- /* convert to nsecs: */
- nsec += (cycle_delta * mult) >> shift;
-
- while (nsec >= NSEC_PER_SEC) {
- tv->tv_sec += 1;
- nsec -= NSEC_PER_SEC;
- }
- tv->tv_usec = nsec / NSEC_PER_USEC;
+ int i;
+ for (i = 0; i < ARRAY_SIZE(vsyscall_nr_to_al); i++)
+ if (vsyscall_nr_to_al[i] == al)
+ return i;
+ return -1;
}
-int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz)
-{
- if (tv)
- do_vgettimeofday(tv);
- if (tz)
- do_get_tz(tz);
- return 0;
-}
+#ifdef CONFIG_UNSAFE_VSYSCALLS
/* This will break when the xtime seconds get inaccurate, but that is
* unlikely */
-time_t __vsyscall(1) vtime(time_t *t)
+time_t __attribute__ ((unused, __section__(".vsyscall_1"))) notrace
+vtime(time_t *t)
{
unsigned seq;
time_t result;
@@ -167,48 +138,127 @@ time_t __vsyscall(1) vtime(time_t *t)
return result;
}
-/* Fast way to get current CPU and node.
- This helps to do per node and per CPU caches in user space.
- The result is not guaranteed without CPU affinity, but usually
- works out because the scheduler tries to keep a thread on the same
- CPU.
+#endif /* CONFIG_UNSAFE_VSYSCALLS */
+
+/* If CONFIG_UNSAFE_VSYSCALLS=y, then this is incorrect for vsyscall_nr == 1. */
+static inline unsigned long vsyscall_intcc_addr(int vsyscall_nr)
+{
+ return VSYSCALL_START + 1024*vsyscall_nr + 2;
+}
- tcache must point to a two element sized long array.
- All arguments can be NULL. */
-long __vsyscall(2)
-vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache)
+void dotraplinkage do_emulate_vsyscall(struct pt_regs *regs, long error_code)
{
- unsigned int p;
- unsigned long j = 0;
-
- /* Fast cache - only recompute value once per jiffies and avoid
- relatively costly rdtscp/cpuid otherwise.
- This works because the scheduler usually keeps the process
- on the same CPU and this syscall doesn't guarantee its
- results anyways.
- We do this here because otherwise user space would do it on
- its own in a likely inferior way (no access to jiffies).
- If you don't like it pass NULL. */
- if (tcache && tcache->blob[0] == (j = VVAR(jiffies))) {
- p = tcache->blob[1];
- } else if (VVAR(vgetcpu_mode) == VGETCPU_RDTSCP) {
- /* Load per CPU data from RDTSCP */
- native_read_tscp(&p);
- } else {
- /* Load per CPU data from GDT */
- asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG));
+ static DEFINE_RATELIMIT_STATE(rs, 3600 * HZ, 3);
+ struct task_struct *tsk;
+ const char *vsyscall_name;
+ int vsyscall_nr;
+ long ret;
+
+ /* Kernel code must never get here. */
+ BUG_ON(!user_mode(regs));
+
+ local_irq_enable();
+
+ vsyscall_nr = al_to_vsyscall_nr(regs->ax & 0xff);
+ if (vsyscall_nr < 0) {
+ warn_bad_vsyscall(KERN_WARNING, regs, "illegal int 0xcc "
+ "(exploit attempt?)");
+ goto sigsegv;
}
- if (tcache) {
- tcache->blob[0] = j;
- tcache->blob[1] = p;
+
+ if (regs->ip - 2 != vsyscall_intcc_addr(vsyscall_nr)) {
+ if (in_vsyscall_page(regs->ip - 2)) {
+ /* This should not be possible. */
+ warn_bad_vsyscall(KERN_WARNING, regs,
+ "int 0xcc bogus magic "
+ "(exploit attempt?)");
+ goto sigsegv;
+ } else {
+ /*
+ * We allow the call because tools like ThreadSpotter
+ * might copy the int 0xcc instruction to user memory.
+ * We make it annoying, though, to try to persuade
+ * the authors to stop doing that...
+ */
+ warn_bad_vsyscall(KERN_WARNING, regs,
+ "int 0xcc in user code "
+ "(exploit attempt? legacy "
+ "instrumented code?)");
+ }
}
- if (cpu)
- *cpu = p & 0xfff;
- if (node)
- *node = p >> 12;
- return 0;
-}
+ tsk = current;
+ if (tsk->seccomp.mode) {
+ do_exit(SIGKILL);
+ goto out;
+ }
+
+ switch (vsyscall_nr) {
+ case 0:
+ vsyscall_name = "gettimeofday";
+ ret = sys_gettimeofday(
+ (struct timeval __user *)regs->di,
+ (struct timezone __user *)regs->si);
+ break;
+
+ case 1:
+#ifdef CONFIG_UNSAFE_VSYSCALLS
+ warn_bad_vsyscall(KERN_WARNING, regs, "bogus time() vsyscall "
+ "emulation (exploit attempt?)");
+ goto sigsegv;
+#else
+ vsyscall_name = "time";
+ ret = sys_time((time_t __user *)regs->di);
+ break;
+#endif
+
+ case 2:
+ vsyscall_name = "getcpu";
+ ret = sys_getcpu((unsigned __user *)regs->di,
+ (unsigned __user *)regs->si,
+ 0);
+ break;
+
+ default:
+ BUG();
+ }
+
+ if (ret == -EFAULT) {
+ /*
+ * Bad news -- userspace fed a bad pointer to a vsyscall.
+ *
+ * With a real vsyscall, that would have caused SIGSEGV.
+ * To make writing reliable exploits using the emulated
+ * vsyscalls harder, generate SIGSEGV here as well.
+ */
+ warn_bad_vsyscall(KERN_INFO, regs,
+ "vsyscall fault (exploit attempt?)");
+ goto sigsegv;
+ }
+
+ regs->ax = ret;
+
+ if (__ratelimit(&rs)) {
+ unsigned long caller;
+ if (get_user(caller, (unsigned long __user *)regs->sp))
+ caller = 0; /* no need to crash on this fault. */
+ printk(KERN_INFO "%s[%d] emulated legacy vsyscall %s(); "
+ "upgrade your code to avoid a performance hit. "
+ "ip:%lx sp:%lx caller:%lx",
+ tsk->comm, task_pid_nr(tsk), vsyscall_name,
+ regs->ip - 2, regs->sp, caller);
+ if (caller)
+ print_vma_addr(" in ", caller);
+ printk("\n");
+ }
+
+out:
+ local_irq_disable();
+ return;
+
+sigsegv:
+ regs->ip -= 2; /* The faulting instruction should be the int 0xcc. */
+ force_sig(SIGSEGV, current);
}
/* Assume __initcall executes before all user space. Hopefully kmod
@@ -264,11 +314,8 @@ void __init map_vsyscall(void)
static int __init vsyscall_init(void)
{
- BUG_ON(((unsigned long) &vgettimeofday !=
- VSYSCALL_ADDR(__NR_vgettimeofday)));
- BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime));
- BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE)));
- BUG_ON((unsigned long) &vgetcpu != VSYSCALL_ADDR(__NR_vgetcpu));
+ BUG_ON(VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE));
+
on_each_cpu(cpu_vsyscall_init, NULL, 1);
/* notifier priority > KVM */
hotcpu_notifier(cpu_vsyscall_notifier, 30);
diff --git a/arch/x86/kernel/vsyscall_emu_64.S b/arch/x86/kernel/vsyscall_emu_64.S
new file mode 100644
index 0000000..7ebde61
--- /dev/null
+++ b/arch/x86/kernel/vsyscall_emu_64.S
@@ -0,0 +1,42 @@
+/*
+ * vsyscall_emu_64.S: Vsyscall emulation page
+ * Copyright (c) 2011 Andy Lutomirski
+ * Subject to the GNU General Public License, version 2
+*/
+
+#include <linux/linkage.h>
+#include <asm/irq_vectors.h>
+
+/*
+ * These magic incantations are chosen so that they fault if entered anywhere
+ * other than an instruction boundary. The movb instruction is two bytes, and
+ * the int imm8 instruction is also two bytes, so the only misaligned places
+ * to enter are the immediate values for the two instructions. 0xcc is int3
+ * (always faults), 0xce is into (faults on x64-64, and 32-bit code can't get
+ * here), and 0xf0 is lock (lock int is invalid).
+ *
+ * The unused parts of the page are filled with 0xcc by the linker script.
+ */
+
+.section .vsyscall_0, "a"
+ENTRY(vsyscall_0)
+ movb $0xcc, %al
+ int $VSYSCALL_EMU_VECTOR
+ ret
+END(vsyscall_0)
+
+#ifndef CONFIG_UNSAFE_VSYSCALLS
+.section .vsyscall_1, "a"
+ENTRY(vsyscall_1)
+ movb $0xce, %al
+ int $VSYSCALL_EMU_VECTOR
+ ret
+END(vsyscall_1)
+#endif
+
+.section .vsyscall_2, "a"
+ENTRY(vsyscall_2)
+ movb $0xf0, %al
+ int $VSYSCALL_EMU_VECTOR
+ ret
+END(vsyscall_2)
--
1.7.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists