| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20110531155153.3518.72773.sendpatchset@prarit.bos.redhat.com>
Date: Tue, 31 May 2011 11:51:53 -0400
From: Prarit Bhargava <prarit@...hat.com>
To: linux-kernel@...r.kernel.org, lm-sensors@...sensors.org
Cc: Prarit Bhargava <prarit@...hat.com>
Subject: [RFC PATCH 11/35] drivers/hwmon changes for SMBIOS and System Firmware
drivers/hwmon changes for SMBIOS and System Firmware
---
drivers/hwmon/abituguru.c | 18 ++++++--
drivers/hwmon/abituguru3.c | 75 ++++++++++++++++--------------
drivers/hwmon/adcxx.c | 1 -
drivers/hwmon/applesmc.c | 73 +++++++++++++++++------------
drivers/hwmon/asus_atk0110.c | 8 ++--
drivers/hwmon/fschmd.c | 104 ++++++++++++++++++++++--------------------
drivers/hwmon/it87.c | 42 ++++++++++-------
drivers/hwmon/lm70.c | 1 -
8 files changed, 180 insertions(+), 142 deletions(-)
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 65a35cf..b9053cb 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -34,7 +34,7 @@
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
-#include <linux/dmi.h>
+#include <linux/sysfw.h>
#include <linux/io.h>
/* Banks */
@@ -1444,15 +1444,25 @@ static int __init abituguru_detect(void)
static struct platform_device *abituguru_pdev;
+static struct sysfw_id abitguru_id_table[] = {
+ {
+ .ident = "Abit Motherboards",
+ .matches = {
+ SYSFW_MATCH(SYSFW_BOARD_VENDOR,
+ "http://www.abit.com.tw/"),
+ },
+ .exactmatch = 1,
+ },
+ {},
+};
+
static int __init abituguru_init(void)
{
int address, err;
struct resource res = { .flags = IORESOURCE_IO };
- const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
/* safety check, refuse to load on non Abit motherboards */
- if (!force && (!board_vendor ||
- strcmp(board_vendor, "http://www.abit.com.tw/")))
+ if (!force && !sysfw_callback(abitguru_id_table))
return -ENODEV;
address = abituguru_detect();
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index d30855a..7d36abc 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -36,7 +36,8 @@
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
-#include <linux/dmi.h>
+#include <linux/smbios.h>
+#include <linux/sysfw.h>
#include <linux/io.h>
/* uGuru3 bank addresses */
@@ -121,11 +122,11 @@ struct abituguru3_sensor_info {
};
/* Avoid use of flexible array members */
-#define ABIT_UGURU3_MAX_DMI_NAMES 2
+#define ABIT_UGURU3_MAX_SMBIOS_NAMES 2
struct abituguru3_motherboard_info {
u16 id;
- const char *dmi_name[ABIT_UGURU3_MAX_DMI_NAMES + 1];
+ const char *smbios_name[ABIT_UGURU3_MAX_SMBIOS_NAMES + 1];
/* + 1 -> end of sensors indicated by a sensor with name == NULL */
struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1];
};
@@ -170,7 +171,7 @@ struct abituguru3_data {
/* Constants */
static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
- { 0x000C, { NULL } /* Unknown, need DMI string */, {
+ { 0x000C, { NULL } /* Unknown, need SMBIOS string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
@@ -192,7 +193,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
{ "AUX1 Fan", 35, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x000D, { NULL } /* Abit AW8, need DMI string */, {
+ { 0x000D, { NULL } /* Abit AW8, need SMBIOS string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
@@ -221,7 +222,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
{ "AUX5 Fan", 39, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x000E, { NULL } /* AL-8, need DMI string */, {
+ { 0x000E, { NULL } /* AL-8, need SMBIOS string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
@@ -242,7 +243,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
{ "SYS Fan", 34, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x000F, { NULL } /* Unknown, need DMI string */, {
+ { 0x000F, { NULL } /* Unknown, need SMBIOS string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
@@ -264,7 +265,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
{ "SYS Fan", 34, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0010, { NULL } /* Abit NI8 SLI GR, need DMI string */, {
+ { 0x0010, { NULL } /* Abit NI8 SLI GR, need SMBIOS string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
@@ -313,7 +314,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
{ "AUX3 Fan", 37, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0012, { NULL } /* Abit AN8 32X, need DMI string */, {
+ { 0x0012, { NULL } /* Abit AN8 32X, need SMBIOS string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 20, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
@@ -335,7 +336,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
{ "AUX1 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0013, { NULL } /* Abit AW8D, need DMI string */, {
+ { 0x0013, { NULL } /* Abit AW8D, need SMBIOS string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
@@ -385,7 +386,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
{ "SYS Fan", 34, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0015, { NULL } /* Unknown, need DMI string */, {
+ { 0x0015, { NULL } /* Unknown, need SMBIOS string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 20, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
@@ -437,7 +438,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
{ "OTES1 Fan", 38, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0017, { NULL } /* Unknown, need DMI string */, {
+ { 0x0017, { NULL } /* Unknown, need SMBIOS string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
@@ -544,7 +545,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
{ "AUX4 Fan", 37, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x001B, { NULL } /* Unknown, need DMI string */, {
+ { 0x001B, { NULL } /* Unknown, need SMBIOS string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR3", 1, 0, 20, 1, 0 },
{ "DDR3 VTT", 2, 0, 10, 1, 0 },
@@ -1119,23 +1120,23 @@ static struct platform_driver abituguru3_driver = {
.resume = abituguru3_resume
};
-static int __init abituguru3_dmi_detect(void)
+static int __init abituguru3_smbios_detect(void)
{
const char *board_vendor, *board_name;
int i, err = (force) ? 1 : -ENODEV;
- const char *const *dmi_name;
+ const char *const *smbios_name;
size_t sublen;
- board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ board_vendor = sysfw_lookup(SYSFW_BOARD_VENDOR);
if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
return err;
- board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ board_name = sysfw_lookup(SYSFW_BOARD_NAME);
if (!board_name)
return err;
/* At the moment, we don't care about the part of the vendor
- * DMI string contained in brackets. Truncate the string at
+ * SMBIOS string contained in brackets. Truncate the string at
* the first occurrence of a bracket. Trim any trailing space
* from the substring.
*/
@@ -1144,11 +1145,11 @@ static int __init abituguru3_dmi_detect(void)
sublen--;
for (i = 0; abituguru3_motherboards[i].id; i++) {
- dmi_name = abituguru3_motherboards[i].dmi_name;
- for ( ; *dmi_name; dmi_name++) {
- if (strlen(*dmi_name) != sublen)
+ smbios_name = abituguru3_motherboards[i].smbios_name;
+ for ( ; *smbios_name; smbios_name++) {
+ if (strlen(*smbios_name) != sublen)
continue;
- if (!strncasecmp(board_name, *dmi_name, sublen))
+ if (!strncasecmp(board_name, *smbios_name, sublen))
return 0;
}
}
@@ -1158,7 +1159,8 @@ static int __init abituguru3_dmi_detect(void)
}
/* FIXME: Manual detection should die eventually; we need to collect stable
- * DMI model names first before we can rely entirely on CONFIG_DMI.
+ * SMBIOS model names first before we can rely entirely on
+ * CONFIG_SMBIOS.
*/
static int __init abituguru3_detect(void)
@@ -1192,21 +1194,26 @@ static int __init abituguru3_init(void)
struct resource res = { .flags = IORESOURCE_IO };
int err;
- /* Attempt DMI detection first */
- err = abituguru3_dmi_detect();
- if (err < 0)
- return err;
-
- /* Fall back to manual detection if there was no exact
- * board name match, or force was specified.
- */
- if (err > 0) {
+ err = 1;
+ if (smbios_available) {
+ /* Attempts SMBIOS detection first */
+ err = abituguru3_smbios_detect();
+ if (err < 0)
+ return err;
+ }
+ if (err) {
+ /* Fall back to manual detection if there was no exact
+ * board name match, or force was specified.
+ */
err = abituguru3_detect();
if (err)
return err;
- pr_warn("this motherboard was not detected using DMI. "
- "Please send the output of \"dmidecode\" to the abituguru3 maintainer (see MAINTAINERS)\n");
+ if (smbios_available)
+ pr_warn("this motherboard was not detected using "
+ "SMBIOS. Please send the output of "
+ "\"dmidecode\" to the abituguru3 maintainer "
+ "(see MAINTAINERS)\n");
}
err = platform_driver_register(&abituguru3_driver);
diff --git a/drivers/hwmon/adcxx.c b/drivers/hwmon/adcxx.c
index b2cacbe..ff47453 100644
--- a/drivers/hwmon/adcxx.c
+++ b/drivers/hwmon/adcxx.c
@@ -44,7 +44,6 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/mutex.h>
-#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
#define DRVNAME "adcxx"
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 4c07436..a2dc0f8 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -36,7 +36,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/timer.h>
-#include <linux/dmi.h>
+#include <linux/sysfw.h>
#include <linux/mutex.h>
#include <linux/hwmon-sysfs.h>
#include <linux/io.h>
@@ -1184,46 +1184,59 @@ static void applesmc_release_key_backlight(void)
destroy_workqueue(applesmc_led_wq);
}
-static int applesmc_dmi_match(const struct dmi_system_id *id)
-{
- return 1;
-}
-
-/* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
- * So we need to put "Apple MacBook Pro" before "Apple MacBook". */
-static __initdata struct dmi_system_id applesmc_whitelist[] = {
- { applesmc_dmi_match, "Apple MacBook Air", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir") },
+static __initdata struct sysfw_id applesmc_whitelist[] = {
+ {
+ .ident = "Apple MacBook Air",
+ .matches = {
+ SYSFW_MATCH(SYSFW_BOARD_VENDOR, "Apple"),
+ SYSFW_MATCH(SYSFW_PRODUCT_NAME, "MacBookAir")
+ },
+ .exactmatch = 1,
},
- { applesmc_dmi_match, "Apple MacBook Pro", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro") },
+ {
+ .ident = "Apple MacBook Pro",
+ .matches = {
+ SYSFW_MATCH(SYSFW_BOARD_VENDOR, "Apple"),
+ SYSFW_MATCH(SYSFW_PRODUCT_NAME, "MacBookPro")
+ },
+ .exactmatch = 1,
},
- { applesmc_dmi_match, "Apple MacBook", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") },
+ {
+ .ident = "Apple MacBook",
+ .matches = {
+ SYSFW_MATCH(SYSFW_BOARD_VENDOR, "Apple"),
+ SYSFW_MATCH(SYSFW_PRODUCT_NAME, "MacBook")
+ },
},
- { applesmc_dmi_match, "Apple Macmini", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Macmini") },
+ {
+ .ident = "Apple Macmini",
+ .matches = {
+ SYSFW_MATCH(SYSFW_BOARD_VENDOR, "Apple"),
+ SYSFW_MATCH(SYSFW_PRODUCT_NAME, "Macmini")
+ },
},
- { applesmc_dmi_match, "Apple MacPro", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
+ {
+ .ident = "Apple MacPro",
+ .matches = {
+ SYSFW_MATCH(SYSFW_BOARD_VENDOR, "Apple"),
+ SYSFW_MATCH(SYSFW_PRODUCT_NAME, "MacPro")
+ },
},
- { applesmc_dmi_match, "Apple iMac", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "iMac") },
+ {
+ .ident = "Apple iMac",
+ .matches = {
+ SYSFW_MATCH(SYSFW_BOARD_VENDOR, "Apple"),
+ SYSFW_MATCH(SYSFW_PRODUCT_NAME, "iMac")
+ },
},
- { .ident = NULL }
+ {}
};
static int __init applesmc_init(void)
{
int ret;
- if (!dmi_check_system(applesmc_whitelist)) {
+ if (!sysfw_callback(applesmc_whitelist)) {
pr_warn("supported laptop not found!\n");
ret = -ENODEV;
goto out;
@@ -1329,4 +1342,4 @@ module_exit(applesmc_exit);
MODULE_AUTHOR("Nicolas Boichat");
MODULE_DESCRIPTION("Apple SMC");
MODULE_LICENSE("GPL v2");
-MODULE_DEVICE_TABLE(dmi, applesmc_whitelist);
+MODULE_DEVICE_TABLE(sysfw, applesmc_whitelist);
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index b5e8920..2247b7b 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -13,7 +13,7 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/dmi.h>
+#include <linux/sysfw.h>
#include <acpi/acpi.h>
#include <acpi/acpixf.h>
@@ -27,12 +27,12 @@ static bool new_if;
module_param(new_if, bool, 0);
MODULE_PARM_DESC(new_if, "Override detection heuristic and force the use of the new ATK0110 interface");
-static const struct dmi_system_id __initconst atk_force_new_if[] = {
+static const struct sysfw_id __initconst atk_force_new_if[] = {
{
/* Old interface has broken MCH temp monitoring */
.ident = "Asus Sabertooth X58",
.matches = {
- DMI_MATCH(DMI_BOARD_NAME, "SABERTOOTH X58")
+ SYSFW_MATCH(SYSFW_BOARD_NAME, "SABERTOOTH X58")
}
},
{ }
@@ -1438,7 +1438,7 @@ static int __init atk0110_init(void)
return -EBUSY;
}
- if (dmi_check_system(atk_force_new_if))
+ if (sysfw_callback(atk_force_new_if))
new_if = true;
ret = acpi_bus_register_driver(&atk_driver);
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index aa6d8b6..ce28caf 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -41,7 +41,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
-#include <linux/dmi.h>
+#include <linux/smbios.h>
#include <linux/fs.h>
#include <linux/watchdog.h>
#include <linux/miscdevice.h>
@@ -290,14 +290,14 @@ struct fschmd_data {
u8 fan_ripple[7]; /* divider for rps */
};
-/* Global variables to hold information read from special DMI tables, which are
- available on FSC machines with an fscher or later chip. There is no need to
- protect these with a lock as they are only modified from our attach function
- which always gets called with the i2c-core lock held and never accessed
- before the attach function is done with them. */
-static int dmi_mult[6] = { 490, 200, 100, 100, 200, 100 };
-static int dmi_offset[6] = { 0, 0, 0, 0, 0, 0 };
-static int dmi_vref = -1;
+/* Global variables to hold information read from special SMBIOS tables, which
+ are available on FSC machines with an fscher or later chip. There is no need
+ to protect these with a lock as they are only modified from our attach
+ function which always gets called with the i2c-core lock held and never
+ accessed before the attach function is done with them. */
+static int smbios_mult[6] = { 490, 200, 100, 100, 200, 100 };
+static int smbios_offset[6] = { 0, 0, 0, 0, 0, 0 };
+static int smbios_vref = -1;
/* Somewhat ugly :( global data pointer list with all fschmd devices, so that
we can find our device data as when using misc_register there is no other
@@ -326,8 +326,8 @@ static ssize_t show_in_value(struct device *dev,
struct fschmd_data *data = fschmd_update_device(dev);
if (data->kind == fscher || data->kind >= fschrc)
- return sprintf(buf, "%d\n", (data->volt[index] * dmi_vref *
- dmi_mult[index]) / 255 + dmi_offset[index]);
+ return sprintf(buf, "%d\n", (data->volt[index] * smbios_vref *
+ smbios_mult[index]) / 255 + smbios_offset[index]);
else
return sprintf(buf, "%d\n", (data->volt[index] *
max_reading[index] + 128) / 255);
@@ -930,54 +930,56 @@ static const struct file_operations watchdog_fops = {
* Detect, register, unregister and update device functions
*/
-/* DMI decode routine to read voltage scaling factors from special DMI tables,
- which are available on FSC machines with an fscher or later chip. */
-static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy)
+/* SMBIOS decode routine to read voltage scaling factors from special SMBIOS
+ tables which are available on FSC machines with an fscher or later chip. */
+static int fschmd_smbios_decode(const union smbios_struct *ss, void *dummy)
{
int i, mult[3] = { 0 }, offset[3] = { 0 }, vref = 0, found = 0;
- /* dmi code ugliness, we get passed the address of the contents of
- a complete DMI record, but in the form of a dmi_header pointer, in
- reality this address holds header->length bytes of which the header
- are the first 4 bytes */
- u8 *dmi_data = (u8 *)header;
+ /* smbios code ugliness, we get passed the address of the contents of
+ a complete SMBIOS record, but in the form of a smbios_header pointer,
+ in reality this address holds header->length bytes of which the
+ header are the first 4 bytes */
+ u8 *smbios_data = (u8 *)ss;
/* We are looking for OEM-specific type 185 */
- if (header->type != 185)
- return;
+ if (ss->header.type != 185)
+ return SMBIOS_WALK_CONTINUE;
/* we are looking for what Siemens calls "subtype" 19, the subtype
- is stored in byte 5 of the dmi block */
- if (header->length < 5 || dmi_data[4] != 19)
- return;
+ is stored in byte 5 of the smbios block */
+ if (ss->header.length < 5 || smbios_data[4] != 19)
+ return SMBIOS_WALK_CONTINUE;
/* After the subtype comes 1 unknown byte and then blocks of 5 bytes,
consisting of what Siemens calls an "Entity" number, followed by
2 16-bit words in LSB first order */
- for (i = 6; (i + 4) < header->length; i += 5) {
+ for (i = 6; (i + 4) < ss->header.length; i += 5) {
/* entity 1 - 3: voltage multiplier and offset */
- if (dmi_data[i] >= 1 && dmi_data[i] <= 3) {
- /* Our in sensors order and the DMI order differ */
+ if (smbios_data[i] >= 1 && smbios_data[i] <= 3) {
+ /* Our in sensors order and the SMBIOS order differ */
const int shuffle[3] = { 1, 0, 2 };
- int in = shuffle[dmi_data[i] - 1];
+ int in = shuffle[smbios_data[i] - 1];
/* Check for twice the same entity */
if (found & (1 << in))
- return;
+ return SMBIOS_WALK_CONTINUE;
- mult[in] = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
- offset[in] = dmi_data[i + 3] | (dmi_data[i + 4] << 8);
+ mult[in] = smbios_data[i + 1] |
+ (smbios_data[i + 2] << 8);
+ offset[in] = smbios_data[i + 3] |
+ (smbios_data[i + 4] << 8);
found |= 1 << in;
}
/* entity 7: reference voltage */
- if (dmi_data[i] == 7) {
+ if (smbios_data[i] == 7) {
/* Check for twice the same entity */
if (found & 0x08)
- return;
+ return SMBIOS_WALK_CONTINUE;
- vref = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
+ vref = smbios_data[i + 1] | (smbios_data[i + 2] << 8);
found |= 0x08;
}
@@ -985,20 +987,22 @@ static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy)
if (found == 0x0F) {
for (i = 0; i < 3; i++) {
- dmi_mult[i] = mult[i] * 10;
- dmi_offset[i] = offset[i] * 10;
+ smbios_mult[i] = mult[i] * 10;
+ smbios_offset[i] = offset[i] * 10;
}
- /* According to the docs there should be separate dmi entries
+ /* According to the docs there should be separate smbios entries
for the mult's and offsets of in3-5 of the syl, but on
my test machine these are not present */
- dmi_mult[3] = dmi_mult[2];
- dmi_mult[4] = dmi_mult[1];
- dmi_mult[5] = dmi_mult[2];
- dmi_offset[3] = dmi_offset[2];
- dmi_offset[4] = dmi_offset[1];
- dmi_offset[5] = dmi_offset[2];
- dmi_vref = vref;
+ smbios_mult[3] = smbios_mult[2];
+ smbios_mult[4] = smbios_mult[1];
+ smbios_mult[5] = smbios_mult[2];
+ smbios_offset[3] = smbios_offset[2];
+ smbios_offset[4] = smbios_offset[1];
+ smbios_offset[5] = smbios_offset[2];
+ smbios_vref = vref;
}
+
+ return SMBIOS_WALK_CONTINUE;
}
static int fschmd_detect(struct i2c_client *client,
@@ -1072,14 +1076,14 @@ static int fschmd_probe(struct i2c_client *client,
data->temp_max[2] = 50 + 128;
}
- /* Read the special DMI table for fscher and newer chips */
- if ((kind == fscher || kind >= fschrc) && dmi_vref == -1) {
- dmi_walk(fschmd_dmi_decode, NULL);
- if (dmi_vref == -1) {
+ /* Read the special SMBIOS table for fscher and newer chips */
+ if ((kind == fscher || kind >= fschrc) && smbios_vref == -1) {
+ smbios_walk(fschmd_smbios_decode, NULL);
+ if (smbios_vref == -1) {
dev_warn(&client->dev,
"Couldn't get voltage scaling factors from "
- "BIOS DMI table, using builtin defaults\n");
- dmi_vref = 33;
+ "SMBIOS table, using builtin defaults\n");
+ smbios_vref = 33;
}
}
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index bb6405b..a0c5021 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -52,7 +52,7 @@
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/string.h>
-#include <linux/dmi.h>
+#include <linux/sysfw.h>
#include <linux/acpi.h>
#include <linux/io.h>
@@ -219,7 +219,7 @@ struct it87_sio_data {
u8 vid_value;
u8 beep_pin;
u8 internal; /* Internal sensors can be labeled */
- /* Features skipped based on config or DMI */
+ /* Features skipped based on config or SMBIOS */
u8 skip_vid;
u8 skip_fan;
u8 skip_pwm;
@@ -1541,13 +1541,24 @@ static const struct attribute_group it87_group_label = {
.attrs = it87_attributes_vid,
};
+static struct sysfw_id __initdata it87_id_table[] = {
+ {
+ .ident = "nVIDIA FN68PT",
+ .matches = {
+ SYSFW_MATCH(SYSFW_BOARD_VENDOR, "nVIDIA"),
+ SYSFW_MATCH(SYSFW_BOARD_NAME, "FN68PT"),
+ },
+ .exactmatch = 1,
+ },
+ {},
+};
+
/* SuperIO detection - will change isa_address if a chip is found */
static int __init it87_find(unsigned short *address,
struct it87_sio_data *sio_data)
{
int err;
u16 chip_type;
- const char *board_vendor, *board_name;
err = superio_enter();
if (err)
@@ -1671,21 +1682,16 @@ static int __init it87_find(unsigned short *address,
if (sio_data->beep_pin)
pr_info("Beeping is supported\n");
- /* Disable specific features based on DMI strings */
- board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
- board_name = dmi_get_system_info(DMI_BOARD_NAME);
- if (board_vendor && board_name) {
- if (strcmp(board_vendor, "nVIDIA") == 0
- && strcmp(board_name, "FN68PT") == 0) {
- /* On the Shuttle SN68PT, FAN_CTL2 is apparently not
- connected to a fan, but to something else. One user
- has reported instant system power-off when changing
- the PWM2 duty cycle, so we disable it.
- I use the board name string as the trigger in case
- the same board is ever used in other systems. */
- pr_info("Disabling pwm2 due to hardware constraints\n");
- sio_data->skip_pwm = (1 << 1);
- }
+ /* Disable specific features based on system firmware strings */
+ if (sysfw_callback(it87_id_table)) {
+ /* On the Shuttle SN68PT, FAN_CTL2 is apparently not
+ connected to a fan, but to something else. One user
+ has reported instant system power-off when changing
+ the PWM2 duty cycle, so we disable it.
+ I use the board name string as the trigger in case
+ the same board is ever used in other systems. */
+ pr_info("Disabling pwm2 due to hardware constraints\n");
+ sio_data->skip_pwm = (1 << 1);
}
exit:
diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c
index c274ea2..bdb34f8 100644
--- a/drivers/hwmon/lm70.c
+++ b/drivers/hwmon/lm70.c
@@ -34,7 +34,6 @@
#include <linux/sysfs.h>
#include <linux/hwmon.h>
#include <linux/mutex.h>
-#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
--
1.7.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists