Message-ID: <1306927051-8937-8-git-send-email-peter.ujfalusi@ti.com>
Date:	Wed, 1 Jun 2011 14:17:30 +0300
From:	Peter Ujfalusi <peter.ujfalusi@...com>
To:	Liam Girdwood <lrg@...com>, Tony Lindgren <tony@...mide.com>,
	Mark Brown <broonie@...nsource.wolfsonmicro.com>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>
CC:	<linux-input@...r.kernel.org>, <linux-omap@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <alsa-devel@...a-project.org>,
	Misael Lopez Cruz <misael.lopez@...com>,
	Jorge Eduardo Candelaria <jorge.candelaria@...com>,
	Peter Ujfalusi <peter.ujfalusi@...com>
Subject: [PATCH 7/8] input: Add initial support for TWL6040 vibrator

From: Misael Lopez Cruz <misael.lopez@...com>

Add twl6040_vibra as a child of MFD device twl6040_codec. This
implementation covers the PCM-to-PWM mode of TWL6040 vibrator
module.

Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@...com>
Signed-off-by: Misael Lopez Cruz <misael.lopez@...com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
 drivers/input/misc/Kconfig         |   11 +
 drivers/input/misc/Makefile        |    1 +
 drivers/input/misc/twl6040-vibra.c |  428 ++++++++++++++++++++++++++++++++++++
 include/linux/i2c/twl.h            |    8 +
 4 files changed, 448 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/misc/twl6040-vibra.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 077309a..d1bf872 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -275,6 +275,17 @@ config INPUT_TWL4030_VIBRA
 	  To compile this driver as a module, choose M here. The module will
 	  be called twl4030_vibra.
 
+config INPUT_TWL6040_VIBRA
+	tristate "Support for TWL6040 Vibrator"
+	depends on TWL4030_CORE
+	select TWL6040_CORE
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables support for TWL6040 Vibrator Driver.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called twl6040_vibra.
+
 config INPUT_UINPUT
 	tristate "User level driver support"
 	help
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 38efb2c..4da7c3a 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
+obj-$(CONFIG_INPUT_TWL6040_VIBRA)	+= twl6040-vibra.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
 obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
new file mode 100644
index 0000000..5a54515
--- /dev/null
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -0,0 +1,428 @@
+/*
+ * twl6040-vibra.c - TWL6040 Vibrator driver
+ *
+ * Author:      Jorge Eduardo Candelaria <jorge.candelaria@...com>
+ * Author:      Misael Lopez Cruz <misael.lopez@...com>
+ *
+ * Copyright:   (C) 2011 Texas Instruments, Inc.
+ *
+ * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@...ia.com>
+ *				Felipe Balbi <felipe.balbi@...ia.com>
+ *				Jari Vanhala <ext-javi.vanhala@...ia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+
+#define EFFECT_DIR_180_DEG	0x8000
+
+/* Recommended modulation index 85% */
+#define TWL6040_VIBRA_MOD	85
+
+#define TWL6040_NUM_SUPPLIES 2
+
+struct vibra_info {
+	struct device *dev;
+	struct input_dev *input_dev;
+	struct workqueue_struct *workqueue;
+	struct work_struct play_work;
+	struct mutex mutex;
+
+	bool enabled;
+	int weak_speed;
+	int strong_speed;
+	int direction;
+
+	unsigned int vibldrv_res;
+	unsigned int vibrdrv_res;
+	unsigned int viblmotor_res;
+	unsigned int vibrmotor_res;
+
+	struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES];
+
+	struct twl6040 *twl6040;
+};
+
+static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
+{
+	struct vibra_info *info = data;
+	struct twl6040 *twl6040 = info->twl6040;
+	u8 status;
+
+	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
+	if (status & TWL6040_VIBLOCDET) {
+		dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
+		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
+				   TWL6040_VIBENAL);
+	}
+	if (status & TWL6040_VIBROCDET) {
+		dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
+		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
+				   TWL6040_VIBENAR);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void twl6040_vibra_enable(struct vibra_info *info)
+{
+	struct twl6040 *twl6040 = info->twl6040;
+	int ret = 0;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies);
+	if (ret) {
+		dev_err(info->dev, "failed to enable regulators %d\n", ret);
+		return;
+	}
+
+	twl6040_power(info->twl6040, 1);
+	if (twl6040_get_rev(twl6040) <= TWL6040_REV_ES1_1) {
+		/*
+		 * ERRATA: Disable overcurrent protection for at least
+		 * 3ms when enabling vibrator drivers to avoid false
+		 * overcurrent detection
+		 */
+		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
+				  TWL6040_VIBENAL | TWL6040_VIBCTRLL);
+		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
+				  TWL6040_VIBENAR | TWL6040_VIBCTRLR);
+		usleep_range(3000, 3500);
+	}
+
+	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
+			  TWL6040_VIBENAL);
+	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
+			  TWL6040_VIBENAR);
+
+	info->enabled = true;
+}
+
+static void twl6040_vibra_disable(struct vibra_info *info)
+{
+	struct twl6040 *twl6040 = info->twl6040;
+
+	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00);
+	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00);
+	twl6040_power(info->twl6040, 0);
+
+	regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies);
+
+	info->enabled = false;
+}
+
+static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res,
+			     int speed, int direction)
+{
+	int vpk, max_code;
+	u8 vibdat;
+
+	/* output swing */
+	vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) /
+		(100 * (vibdrv_res + motor_res));
+
+	/* 50mV per VIBDAT code step */
+	max_code = vpk / 50;
+	if (max_code > TWL6040_VIBDAT_MAX)
+		max_code = TWL6040_VIBDAT_MAX;
+
+	/* scale speed to max allowed code */
+	vibdat = (u8)((speed * max_code) / USHRT_MAX);
+
+	/* 2's complement for direction > 180 degrees */
+	vibdat *= direction;
+
+	return vibdat;
+}
+
+static void twl6040_vibra_set_effect(struct vibra_info *info)
+{
+	struct twl6040 *twl6040 = info->twl6040;
+	u8 vibdatl, vibdatr;
+	int volt;
+
+	/* weak motor */
+	volt = regulator_get_voltage(info->supplies[0].consumer) / 1000;
+	vibdatl = twl6040_vibra_code(volt, info->vibldrv_res,
+				     info->viblmotor_res,
+				     info->weak_speed, info->direction);
+
+	/* strong motor */
+	volt = regulator_get_voltage(info->supplies[1].consumer) / 1000;
+	vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res,
+				     info->vibrmotor_res,
+				     info->strong_speed, info->direction);
+
+	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl);
+	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr);
+}
+
+static void vibra_play_work(struct work_struct *work)
+{
+	struct vibra_info *info = container_of(work,
+				struct vibra_info, play_work);
+
+	mutex_lock(&info->mutex);
+
+	if (info->weak_speed || info->strong_speed) {
+		if (!info->enabled)
+			twl6040_vibra_enable(info);
+
+		twl6040_vibra_set_effect(info);
+	} else if (info->enabled)
+		twl6040_vibra_disable(info);
+
+	mutex_unlock(&info->mutex);
+}
+
+static int vibra_play(struct input_dev *input, void *data,
+		      struct ff_effect *effect)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+	int ret;
+
+	info->weak_speed = effect->u.rumble.weak_magnitude;
+	info->strong_speed = effect->u.rumble.strong_magnitude;
+	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;
+
+	ret = queue_work(info->workqueue, &info->play_work);
+	if (!ret) {
+		dev_info(&input->dev, "work is already on queue\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int twl6040_vibra_open(struct input_dev *input)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	info->workqueue = create_singlethread_workqueue("vibra");
+	if (info->workqueue == NULL) {
+		dev_err(&input->dev, "couldn't create workqueue\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void twl6040_vibra_close(struct input_dev *input)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	cancel_work_sync(&info->play_work);
+	INIT_WORK(&info->play_work, vibra_play_work);
+	destroy_workqueue(info->workqueue);
+	info->workqueue = NULL;
+
+	mutex_lock(&info->mutex);
+
+	if (info->enabled)
+		twl6040_vibra_disable(info);
+
+	mutex_unlock(&info->mutex);
+}
+
+#if CONFIG_PM
+static int twl6040_vibra_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vibra_info *info = platform_get_drvdata(pdev);
+
+	mutex_lock(&info->mutex);
+
+	if (info->enabled)
+		twl6040_vibra_disable(info);
+
+	mutex_unlock(&info->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops,
+			 twl6040_vibra_suspend, NULL);
+#endif
+
+static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
+{
+	struct twl4030_vibra_data *pdata = pdev->dev.platform_data;
+	struct vibra_info *info;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "platform_data not available\n");
+		return -EINVAL;
+	}
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		dev_err(&pdev->dev, "couldn't allocate memory\n");
+		return -ENOMEM;
+	}
+
+	info->dev = &pdev->dev;
+	info->twl6040 = dev_get_drvdata(pdev->dev.parent);
+	info->vibldrv_res = pdata->vibldrv_res;
+	info->vibrdrv_res = pdata->vibrdrv_res;
+	info->viblmotor_res = pdata->viblmotor_res;
+	info->vibrmotor_res = pdata->vibrmotor_res;
+	if ((!info->vibldrv_res && !info->viblmotor_res) ||
+	    (!info->vibrdrv_res && !info->vibrmotor_res)) {
+		dev_err(info->dev, "invalid vibra driver/motor resistance\n");
+		ret = -EINVAL;
+		goto err_kzalloc;
+	}
+
+	mutex_init(&info->mutex);
+	INIT_WORK(&info->play_work, vibra_play_work);
+
+	info->input_dev = input_allocate_device();
+	if (info->input_dev == NULL) {
+		dev_err(info->dev, "couldn't allocate input device\n");
+		ret = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	input_set_drvdata(info->input_dev, info);
+
+	info->input_dev->name = "twl6040:vibrator";
+	info->input_dev->id.version = 1;
+	info->input_dev->dev.parent = pdev->dev.parent;
+	info->input_dev->open = twl6040_vibra_open;
+	info->input_dev->close = twl6040_vibra_close;
+	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
+
+	ret = input_ff_create_memless(info->input_dev, NULL, vibra_play);
+	if (ret < 0) {
+		dev_err(info->dev, "couldn't register vibrator to FF\n");
+		goto err_ialloc;
+	}
+
+	ret = input_register_device(info->input_dev);
+	if (ret < 0) {
+		dev_err(info->dev, "couldn't register input device\n");
+		goto err_iff;
+	}
+
+	platform_set_drvdata(pdev, info);
+
+	ret = twl6040_request_irq(info->twl6040, TWL6040_IRQ_VIB,
+				  twl6040_vib_irq_handler, 0,
+				  "twl6040_irq_vib", info);
+	if (ret) {
+		dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
+		goto err_irq;
+	}
+
+	info->supplies[0].supply = "vddvibl";
+	info->supplies[1].supply = "vddvibr";
+	ret = regulator_bulk_get(info->dev, ARRAY_SIZE(info->supplies),
+				 info->supplies);
+	if (ret) {
+		dev_err(info->dev, "couldn't get regulators %d\n", ret);
+		goto err_regulator;
+	}
+
+	if (pdata->vddvibl_uV) {
+		ret = regulator_set_voltage(info->supplies[0].consumer,
+					    pdata->vddvibl_uV,
+					    pdata->vddvibl_uV);
+		if (ret) {
+			dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
+				ret);
+			goto err_voltage;
+		}
+	}
+
+	if (pdata->vddvibr_uV) {
+		ret = regulator_set_voltage(info->supplies[1].consumer,
+					    pdata->vddvibr_uV,
+					    pdata->vddvibr_uV);
+		if (ret) {
+			dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
+				ret);
+			goto err_voltage;
+		}
+	}
+
+	return 0;
+
+err_voltage:
+	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
+err_regulator:
+	twl6040_free_irq(info->twl6040, TWL6040_IRQ_VIB, info);
+err_irq:
+	input_unregister_device(info->input_dev);
+	info->input_dev = NULL;
+err_iff:
+	if (info->input_dev)
+		input_ff_destroy(info->input_dev);
+err_ialloc:
+	input_free_device(info->input_dev);
+err_kzalloc:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit twl6040_vibra_remove(struct platform_device *pdev)
+{
+	struct vibra_info *info = platform_get_drvdata(pdev);
+
+	twl6040_power(info->twl6040, 0);
+	regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
+	twl6040_free_irq(info->twl6040, TWL6040_IRQ_VIB, info);
+	input_unregister_device(info->input_dev);
+	kfree(info);
+
+	return 0;
+}
+
+static struct platform_driver twl6040_vibra_driver = {
+	.probe		= twl6040_vibra_probe,
+	.remove		= __devexit_p(twl6040_vibra_remove),
+	.driver		= {
+		.name	= "twl6040-vibra",
+		.owner	= THIS_MODULE,
+#if CONFIG_PM
+		.pm	= &twl6040_vibra_pm_ops,
+#endif
+	},
+};
+
+static int __init twl6040_vibra_init(void)
+{
+	return platform_driver_register(&twl6040_vibra_driver);
+}
+module_init(twl6040_vibra_init);
+
+static void __exit twl6040_vibra_exit(void)
+{
+	platform_driver_unregister(&twl6040_vibra_driver);
+}
+module_exit(twl6040_vibra_exit);
+
+MODULE_ALIAS("platform:twl6040-vibra");
+MODULE_DESCRIPTION("TWL6040 Vibra driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@...com>");
+MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@...com>");
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index ea5baa2..685fd76 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -669,6 +669,14 @@ struct twl4030_codec_data {
 
 struct twl4030_vibra_data {
 	unsigned int	coexist;
+
+	/* twl6040 */
+	unsigned int vibldrv_res;	/* left driver resistance */
+	unsigned int vibrdrv_res;	/* right driver resistance */
+	unsigned int viblmotor_res;	/* left motor resistance */
+	unsigned int vibrmotor_res;	/* right motor resistance */
+	int vddvibl_uV;			/* VDDVIBL volt, set 0 for fixed reg */
+	int vddvibr_uV;			/* VDDVIBR volt, set 0 for fixed reg */
 };
 
 struct twl4030_audio_data {
-- 
1.7.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists