| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1307645735-24933-1-git-send-email-amurray@mpcdata.com>
Date: Thu, 9 Jun 2011 19:55:35 +0100
From: Andrew Murray <amurray@...data.com>
To: joe@...ches.com
Cc: w.sang@...gutronix.de, geert@...ux-m68k.org,
linux-embedded@...r.kernel.org, linux-kernel@...r.kernel.org,
trivial@...nel.org, rdunlap@...otime.net, udknight@...il.com,
namhyung@...il.com, Andrew Murray <amurray@...-data.co.uk>
Subject: Re: [PATCH] printk-formats.txt documentation update
From: Andrew Murray <amurray@...-data.co.uk>
This patch updates the incomplete documentation concerning the printk
extended format specifiers
Signed-off-by: Andrew Murray <amurray@...-data.co.uk>
---
Documentation/printk-formats.txt | 119 +++++++++++++++++++++++++++++++++++++-
1 files changed, 117 insertions(+), 2 deletions(-)
diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt
index 1b5a5dd..85a06aa 100644
--- a/Documentation/printk-formats.txt
+++ b/Documentation/printk-formats.txt
@@ -9,7 +9,121 @@ If variable is of Type, use printk format specifier:
size_t %zu or %zx
ssize_t %zd or %zx
-Raw pointer value SHOULD be printed with %p.
+Raw pointer value SHOULD be printed with %p. The kernel supports
+the following extended format specifiers for pointer types:
+
+Symbols/Function Pointers:
+
+ %pF versatile_init+0x0/0x110
+ %pf versatile_init
+ %pS versatile_init+0x0/0x110
+ %ps versatile_init
+ %pB prev_fn_of_versatile_init+0x88/0x88
+
+ For printing symbols and function pointers. The 'S' and 's' specifiers
+ result in the symbol name with ('S') or without ('s') offsets. Where
+ this is used on a kernel without KALLSYMS - the symbol address is
+ printed instead.
+
+ The 'B' specifier results in the symbol name with offsets and should be
+ used when printing stack backtraces. The specifier takes into
+ consideration the effect of compiler optimisations which may occur
+ when tail-call's are used and marked with the noreturn GCC attribute.
+
+ On ia64, ppc64 and parisc64 architectures function pointers are
+ actually function descriptors which must first be resolved. The 'F' and
+ 'f' specifiers perform this resolution and then provide the same
+ functionality as the 'S' and 's' specifiers.
+
+Kernel Pointers:
+
+ %pK 0x01234567 or 0x0123456789abcdef
+
+ For printing kernel pointers which should be hidden from unprivileged
+ users. The behaviour of %pK depends on the kptr_restrict sysctl - see
+ Documentation/sysctl/kernel.txt for more details.
+
+Struct Resources:
+
+ %pr [mem 0x60000000-0x6fffffff flags 0x2200] or
+ [mem 0x0000000060000000-0x000000006fffffff flags 0x2200]
+ %pR [mem 0x60000000-0x6fffffff pref] or
+ [mem 0x0000000060000000-0x000000006fffffff pref]
+
+ For printing struct resources. The 'R' and 'r' specifiers result in a
+ printed resource with ('R') or without ('r') a decoded flags member.
+
+MAC/FDDI addresses:
+
+ %pM 00:01:02:03:04:05
+ %pMF 00-01-02-03-04-05
+ %pm 000102030405
+
+ For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm'
+ specifiers result in a printed address with ('M') or without ('m') byte
+ separators. The default byte separator is the colon (':').
+
+ Where FDDI addresses are concerned the 'F' specifier can be used after
+ the 'M' specifier to use dash ('-') separators instead of the default
+ separator.
+
+IPv4 addresses:
+
+ %pI4 1.2.3.4
+ %pi4 001.002.003.004
+ %p[Ii][hnbl]
+
+ For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4'
+ specifiers result in a printed address with ('i4') or without ('I4')
+ leading zeros.
+
+ The additional 'h', 'n', 'b', and 'l' specifiers are used to specify
+ host, network, big or little endian order addresses respectively. Where
+ no specifier is provided the default network/big endian order is used.
+
+IPv6 addresses:
+
+ %pI6 0001:0002:0003:0004:0005:0006:0007:0008
+ %pi6 00010002000300040005000600070008
+ %pI6c 1:2:3:4:5:6:7:8
+
+ For printing IPv6 network-order 16 bit hex addresses. The 'I6' and 'i6'
+ specifiers result in a printed address with ('I6') or without ('i6')
+ colon-separators. Leading zeros are always used.
+
+ The additional 'c' specifier can be used with the 'I' specifier to
+ print a compressed IPv6 address as described by
+ http://tools.ietf.org/html/rfc5952
+
+UUID/GUID addresses:
+
+ %pUb 00010203-0405-0607-0809-0a0b0c0d0e0f
+ %pUB 00010203-0405-0607-0809-0A0B0C0D0E0F
+ %pUl 03020100-0504-0706-0809-0a0b0c0e0e0f
+ %pUL 03020100-0504-0706-0809-0A0B0C0E0E0F
+
+ For printing 16 byte UUID/GUIDs addresses. The additional 'l', 'L',
+ 'b' and 'B' specifiers are used to specify a little endian order in
+ lower ('l') or upper case ('L') hex characters - and big endian order
+ in lower ('b') or upper case ('B') hex characters.
+
+ Where no additional specifiers are used the default little endian
+ order with lower case hex characters will be printed.
+
+struct va_format:
+
+ %pV
+
+ For printing struct va_format structures. These contain a format string
+ and va_list as follows:
+
+ struct va_format {
+ const char *fmt;
+ va_list *va;
+ };
+
+ Do not use this feature without some mechanism to verify the
+ correctness of the format string and va_list arguments.
u64 SHOULD be printed with %llu/%llx, (unsigned long long):
@@ -32,4 +146,5 @@ Reminder: sizeof() result is of type size_t.
Thank you for your cooperation and attention.
-By Randy Dunlap <rdunlap@...otime.net>
+By Randy Dunlap <rdunlap@...otime.net> and
+Andrew Murray <amurray@...-data.co.uk>
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists