Message-ID: <20110613072850.GA7289@mail.fossee.in>
Date:	Mon, 13 Jun 2011 12:58:50 +0530
From:	"Prashant P. Shah" <pshah.mumbai@...il.com>
To:	devel@...uxdriverproject.org
Cc:	Greg Kroah-Hartman <gregkh@...e.de>,
	Frank Mori Hess <fmhess@...rs.sourceforge.net>,
	Ian Abbott <abbotti@....co.uk>, linux-kernel@...r.kernel.org,
	pshah.mumbai@...il.com
Subject: [PATCH 1/2] Staging: comedi: add dyna_pci10xx driver

For Dynalog PCI DAQ cards:
  PCI-1050

Signed-off-by: Prashant P. Shah <pshah.mumbai@...il.com>
---
 drivers/staging/comedi/drivers/dyna_pci10xx.c |  462 +++++++++++++++++++++++++
 1 files changed, 462 insertions(+), 0 deletions(-)
 create mode 100644 drivers/staging/comedi/drivers/dyna_pci10xx.c

diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c
new file mode 100644
index 0000000..da8a2bf
--- /dev/null
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -0,0 +1,462 @@
+/*
+ * comedi/drivers/dyna_pci10xx.c
+ * Copyright (C) 2011 Prashant Shah, pshah.mumbai@...il.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ Driver: dyna_pci10xx
+ Devices: Dynalog India PCI DAQ Cards, http://www.dynalogindia.com/
+ Author: Prashant Shah <pshah.mumbai@...il.com>
+ Developed at Automation Labs, Chemical Dept., IIT Bombay, India.
+ Prof. Kannan Moudgalya <kannan@...b.ac.in>
+ http://www.iitb.ac.in
+ Status: Stable
+ Version: 1.0
+ Device Supported :
+ - Dynalog PCI 1050
+
+ Notes :
+ - Dynalog India Pvt. Ltd. does not have a registered PCI Vendor ID and
+ they are using the PLX Technlogies Vendor ID since that is the PCI Chip used
+ in the card.
+ - Dynalog India Pvt. Ltd. has provided the internal register specification for
+ their cards in their manuals.
+*/
+
+#include "../comedidev.h"
+#include "comedi_pci.h"
+#include <linux/mutex.h>
+
+#define PCI_VENDOR_ID_DYNALOG		0x10b5
+#define DRV_NAME			"dyna_pci10xx"
+
+#define READ_TIMEOUT 50
+
+static DEFINE_MUTEX(start_stop_sem);
+
+static DEFINE_PCI_DEVICE_TABLE(dyna_pci10xx_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_DYNALOG, 0x1050) },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, dyna_pci10xx_pci_table);
+
+static int dyna_pci10xx_attach(struct comedi_device *dev,
+			  struct comedi_devconfig *it);
+static int dyna_pci10xx_detach(struct comedi_device *dev);
+
+static const struct comedi_lrange range_pci1050_ai = { 3, {
+							  BIP_RANGE(10),
+							  BIP_RANGE(5),
+							  UNI_RANGE(10)
+							  }
+};
+
+static const char range_codes_pci1050_ai[] = { 0x00, 0x10, 0x30 };
+
+static const struct comedi_lrange range_pci1050_ao = { 1, {
+							  UNI_RANGE(10)
+							  }
+};
+
+static const char range_codes_pci1050_ao[] = { 0x00 };
+
+struct boardtype {
+	const char *name;
+	int device_id;
+	int ai_chans;
+	int ai_bits;
+	int ao_chans;
+	int ao_bits;
+	int di_chans;
+	int di_bits;
+	int do_chans;
+	int do_bits;
+	const struct comedi_lrange *range_ai;
+	const char *range_codes_ai;
+	const struct comedi_lrange *range_ao;
+	const char *range_codes_ao;
+};
+
+static const struct boardtype boardtypes[] = {
+	{
+	.name = "dyna_pci1050",
+	.device_id = 0x1050,
+	.ai_chans = 16,
+	.ai_bits = 12,
+	.ao_chans = 16,
+	.ao_bits = 12,
+	.di_chans = 16,
+	.di_bits = 16,
+	.do_chans = 16,
+	.do_bits = 16,
+	.range_ai = &range_pci1050_ai,
+	.range_codes_ai = range_codes_pci1050_ai,
+	.range_ao = &range_pci1050_ao,
+	.range_codes_ao = range_codes_pci1050_ao,
+	},
+	/*  dummy entry corresponding to driver name */
+	{.name = DRV_NAME},
+};
+
+static struct comedi_driver driver_dyna_pci10xx = {
+	.driver_name = DRV_NAME,
+	.module = THIS_MODULE,
+	.attach = dyna_pci10xx_attach,
+	.detach = dyna_pci10xx_detach,
+	.board_name = &boardtypes[0].name,
+	.offset = sizeof(struct boardtype),
+	.num_names = ARRAY_SIZE(boardtypes),
+};
+
+struct dyna_pci10xx_private {
+	struct pci_dev *pci_dev;	/*  ptr to PCI device */
+	char valid;			/*  card is usable */
+	struct mutex mutex;
+
+	/* device base address registers */
+	unsigned long BADR0, BADR1, BADR2, BADR3, BADR4, BADR5;
+};
+
+#define thisboard ((const struct boardtype *)dev->board_ptr)
+#define devpriv ((struct dyna_pci10xx_private *)dev->private)
+
+/******************************************************************************/
+/************************** READ WRITE FUNCTIONS ******************************/
+/******************************************************************************/
+
+/* analog input callback */
+static int dyna_pci10xx_insn_read_ai(struct comedi_device *dev,
+			struct comedi_subdevice *s,
+			struct comedi_insn *insn, unsigned int *data)
+{
+	int n, counter;
+	u16 d = 0;
+	unsigned int chan, range;
+
+	/* get the channel number and range */
+	chan = CR_CHAN(insn->chanspec);
+	range = thisboard->range_codes_ai[CR_RANGE((insn->chanspec))];
+
+	mutex_lock(&devpriv->mutex);
+	/* convert n samples */
+	for (n = 0; n < insn->n; n++) {
+		/* trigger conversion */
+		smp_mb();
+		outw_p(0x0000 + range + chan, devpriv->BADR2 + 2);
+		udelay(10);
+		/* read data */
+		for (counter = 0; counter < READ_TIMEOUT; counter++) {
+			d = inw_p(devpriv->BADR2);
+
+			/* check if read is successfull if the EOC bit is set */
+			if (d & (1 << 15))
+				goto conv_finish;
+		}
+		data[n] = 0;
+		printk(KERN_DEBUG "comedi: dyna_pci10xx: "
+			"timeout reading analog input\n");
+		continue;
+conv_finish:
+		/* mask the first 4 bits - EOC bits */
+		d &= 0x0FFF;
+		data[n] = d;
+	}
+	mutex_unlock(&devpriv->mutex);
+
+	/* return the number of samples read/written */
+	return n;
+}
+
+/* analog output callback */
+static int dyna_pci10xx_insn_write_ao(struct comedi_device *dev,
+				 struct comedi_subdevice *s,
+				 struct comedi_insn *insn, unsigned int *data)
+{
+	int n;
+	unsigned int chan, range;
+
+	chan = CR_CHAN(insn->chanspec);
+	range = thisboard->range_codes_ai[CR_RANGE((insn->chanspec))];
+
+	mutex_lock(&devpriv->mutex);
+	for (n = 0; n < insn->n; n++) {
+		smp_mb();
+		/* trigger conversion and write data */
+		outw_p(data[n], devpriv->BADR2);
+		udelay(10);
+	}
+	mutex_unlock(&devpriv->mutex);
+	return n;
+}
+
+/* digital input bit interface */
+static int dyna_pci10xx_di_insn_bits(struct comedi_device *dev,
+			      struct comedi_subdevice *s,
+			      struct comedi_insn *insn, unsigned int *data)
+{
+	u16 d = 0;
+
+	if (insn->n != 2)
+		return -EINVAL;
+
+	mutex_lock(&devpriv->mutex);
+	smp_mb();
+	d = inw_p(devpriv->BADR3);
+	udelay(10);
+
+	/* on return the data[0] contains output and data[1] contains input */
+	data[1] = d;
+	data[0] = s->state;
+	mutex_unlock(&devpriv->mutex);
+	return 2;
+}
+
+/* digital output bit interface */
+static int dyna_pci10xx_do_insn_bits(struct comedi_device *dev,
+			      struct comedi_subdevice *s,
+			      struct comedi_insn *insn, unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;
+
+	/* The insn data is a mask in data[0] and the new data
+	 * in data[1], each channel cooresponding to a bit.
+	 * s->state contains the previous write data
+	 */
+	mutex_lock(&devpriv->mutex);
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= (data[0] & data[1]);
+		smp_mb();
+		outw_p(s->state, devpriv->BADR3);
+		udelay(10);
+	}
+
+	/*
+	 * On return, data[1] contains the value of the digital
+	 * input and output lines. We just return the software copy of the
+	 * output values if it was a purely digital output subdevice.
+	 */
+	data[1] = s->state;
+	mutex_unlock(&devpriv->mutex);
+	return 2;
+}
+
+/******************************************************************************/
+/*********************** INITIALIZATION FUNCTIONS *****************************/
+/******************************************************************************/
+
+static int dyna_pci10xx_attach(struct comedi_device *dev,
+			  struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	struct pci_dev *pcidev;
+	unsigned int opt_bus, opt_slot;
+	int board_index, i;
+
+	mutex_lock(&start_stop_sem);
+
+	if (alloc_private(dev, sizeof(struct dyna_pci10xx_private)) < 0) {
+		printk(KERN_ERR "comedi: dyna_pci10xx: "
+			"failed to allocate memory!\n");
+		mutex_unlock(&start_stop_sem);
+		return -ENOMEM;
+	}
+
+	opt_bus = it->options[0];
+	opt_slot = it->options[1];
+	dev->board_name = thisboard->name;
+	dev->irq = 0;
+
+	/*
+	 * Probe the PCI bus and located the matching device
+	 */
+	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
+		pcidev != NULL;
+		pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
+
+		board_index = -1;
+		for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) {
+			if ((pcidev->vendor == PCI_VENDOR_ID_DYNALOG) &&
+				(pcidev->device == boardtypes[i].device_id)) {
+					board_index = i;
+					break;
+				}
+		}
+		if (board_index < 0)
+			continue;
+
+		/* Found matching vendor/device. */
+		if (opt_bus || opt_slot) {
+			/* Check bus/slot. */
+			if (opt_bus != pcidev->bus->number
+			    || opt_slot != PCI_SLOT(pcidev->devfn))
+				continue;	/* no match */
+		}
+
+		goto found;
+	}
+	printk(KERN_ERR "comedi: dyna_pci10xx: no supported device found!\n");
+	mutex_unlock(&start_stop_sem);
+	return -EIO;
+
+found:
+
+	if (!pcidev) {
+		if (opt_bus || opt_slot) {
+			printk(KERN_ERR "comedi: dyna_pci10xx: "
+				"invalid PCI device at b:s %d:%d\n",
+				opt_bus, opt_slot);
+		} else {
+			printk(KERN_ERR "comedi: dyna_pci10xx: "
+				"invalid PCI device\n");
+		}
+		mutex_unlock(&start_stop_sem);
+		return -EIO;
+	}
+
+	if (comedi_pci_enable(pcidev, DRV_NAME)) {
+		printk(KERN_ERR "comedi: dyna_pci10xx: "
+			"failed to enable PCI device and request regions!");
+		mutex_unlock(&start_stop_sem);
+		return -EIO;
+	}
+
+	mutex_init(&devpriv->mutex);
+	dev->board_ptr = &boardtypes[board_index];
+	devpriv->pci_dev = pcidev;
+
+	printk(KERN_INFO "comedi: dyna_pci10xx: device found!\n");
+
+	/* initialize device base address registers */
+	devpriv->BADR0 = pci_resource_start(pcidev, 0);
+	devpriv->BADR1 = pci_resource_start(pcidev, 1);
+	devpriv->BADR2 = pci_resource_start(pcidev, 2);
+	devpriv->BADR3 = pci_resource_start(pcidev, 3);
+	devpriv->BADR4 = pci_resource_start(pcidev, 4);
+	devpriv->BADR5 = pci_resource_start(pcidev, 5);
+
+	if (alloc_subdevices(dev, 4) < 0) {
+		printk(KERN_ERR "comedi: dyna_pci10xx: "
+			"failed allocating subdevices\n");
+		mutex_unlock(&start_stop_sem);
+		return -ENOMEM;
+	}
+
+	/* analog input */
+	s = dev->subdevices + 0;
+	s->type = COMEDI_SUBD_AI;
+	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
+	s->n_chan = thisboard->ai_chans;
+	s->maxdata = 0x0FFF;
+	s->range_table = thisboard->range_ai;
+	s->len_chanlist = 16;
+	s->insn_read = dyna_pci10xx_insn_read_ai;
+
+	/* analog output */
+	s = dev->subdevices + 1;
+	s->type = COMEDI_SUBD_AO;
+	s->subdev_flags = SDF_WRITABLE;
+	s->n_chan = thisboard->ao_chans;
+	s->maxdata = 0x0FFF;
+	s->range_table = thisboard->range_ao;
+	s->len_chanlist = 16;
+	s->insn_write = dyna_pci10xx_insn_write_ao;
+
+	/* digital input */
+	s = dev->subdevices + 2;
+	s->type = COMEDI_SUBD_DI;
+	s->subdev_flags = SDF_READABLE | SDF_GROUND;
+	s->n_chan = thisboard->di_chans;
+	s->maxdata = 1;
+	s->range_table = &range_digital;
+	s->len_chanlist = thisboard->di_chans;
+	s->insn_bits = dyna_pci10xx_di_insn_bits;
+
+	/* digital output */
+	s = dev->subdevices + 3;
+	s->type = COMEDI_SUBD_DO;
+	s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
+	s->n_chan = thisboard->do_chans;
+	s->maxdata = 1;
+	s->range_table = &range_digital;
+	s->len_chanlist = thisboard->do_chans;
+	s->state = 0;
+	s->insn_bits = dyna_pci10xx_do_insn_bits;
+
+	devpriv->valid = 1;
+	mutex_unlock(&start_stop_sem);
+
+	printk(KERN_INFO "comedi: dyna_pci10xx: %s - device setup completed!\n",
+		boardtypes[board_index].name);
+
+	return 1;
+}
+
+static int dyna_pci10xx_detach(struct comedi_device *dev)
+{
+	if (devpriv && devpriv->pci_dev) {
+		comedi_pci_disable(devpriv->pci_dev);
+		mutex_destroy(&devpriv->mutex);
+	}
+
+	return 0;
+}
+
+static int __devinit driver_dyna_pci10xx_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_dyna_pci10xx.driver_name);
+}
+
+static void __devexit driver_dyna_pci10xx_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_dyna_pci10xx_pci_driver = {
+	.id_table = dyna_pci10xx_pci_table,
+	.probe = &driver_dyna_pci10xx_pci_probe,
+	.remove = __devexit_p(&driver_dyna_pci10xx_pci_remove)
+};
+
+static int __init driver_dyna_pci10xx_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_dyna_pci10xx);
+	if (retval < 0)
+		return retval;
+
+	driver_dyna_pci10xx_pci_driver.name =
+		(char *)driver_dyna_pci10xx.driver_name;
+	return pci_register_driver(&driver_dyna_pci10xx_pci_driver);
+}
+
+static void __exit driver_dyna_pci10xx_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_dyna_pci10xx_pci_driver);
+	comedi_driver_unregister(&driver_dyna_pci10xx);
+}
+
+module_init(driver_dyna_pci10xx_init_module);
+module_exit(driver_dyna_pci10xx_cleanup_module);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Prashant Shah <pshah.mumbai@...il.com>");
+MODULE_DESCRIPTION("Comedi based drivers for Dynalog PCI DAQ cards");
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists