| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 15 Jun 2011 16:59:47 -0700
From: Greg KH <gregkh@...e.de>
To: linux-kernel@...r.kernel.org, stable@...nel.org
Cc: stable-review@...nel.org, torvalds@...ux-foundation.org,
akpm@...ux-foundation.org, alan@...rguk.ukuu.org.uk,
Jussi Kivilinna <jussi.kivilinna@...et.fi>,
"John W. Linville" <linville@...driver.com>
Subject: [24/89] zd1211rw: fix to work on OHCI
2.6.39-stable review patch. If anyone has any objections, please let us know.
------------------
From: Jussi Kivilinna <jussi.kivilinna@...et.fi>
commit 59342f6a6bc35df623fb44784daa5e1077063b8f upstream.
zd1211 devices register 'EP 4 OUT' endpoint as Interrupt type on USB 2.0:
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
However on USB 1.1 endpoint becomes Bulk:
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Commit 37939810b937aba830dd751291fcdc51cae1a6cb assumed that endpoint is
always interrupt type and changed usb_bulk_msg() calls to usb_interrupt_msg().
Problem here is that usb_bulk_msg() on interrupt endpoint selfcorrects the
call and changes requested pipe to interrupt type (see usb_bulk_msg).
However with usb_interrupt_msg() on bulk endpoint does not correct the
pipe type to bulk, but instead URB is submitted with interrupt type pipe.
So pre-2.6.39 used usb_bulk_msg() and therefore worked with both endpoint
types, however in 2.6.39 usb_interrupt_msg() with bulk endpoint causes
ohci_hcd to fail submitted URB instantly with -ENOSPC and preventing zd1211rw
from working with OHCI.
Fix this by detecting endpoint type and using correct endpoint/pipe types
for URB. Also fix asynchronous zd_usb_iowrite16v_async() to use right
URB type on 'EP 4 OUT'.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@...et.fi>
Signed-off-by: John W. Linville <linville@...driver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/net/wireless/zd1211rw/zd_usb.c | 53 ++++++++++++++++++++++++++-------
1 file changed, 42 insertions(+), 11 deletions(-)
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1533,6 +1533,31 @@ static void __exit usb_exit(void)
module_init(usb_init);
module_exit(usb_exit);
+static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len,
+ int *actual_length, int timeout)
+{
+ /* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in
+ * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint
+ * descriptor.
+ */
+ struct usb_host_endpoint *ep;
+ unsigned int pipe;
+
+ pipe = usb_sndintpipe(udev, EP_REGS_OUT);
+ ep = usb_pipe_endpoint(udev, pipe);
+ if (!ep)
+ return -EINVAL;
+
+ if (usb_endpoint_xfer_int(&ep->desc)) {
+ return usb_interrupt_msg(udev, pipe, data, len,
+ actual_length, timeout);
+ } else {
+ pipe = usb_sndbulkpipe(udev, EP_REGS_OUT);
+ return usb_bulk_msg(udev, pipe, data, len, actual_length,
+ timeout);
+ }
+}
+
static int usb_int_regs_length(unsigned int count)
{
return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data);
@@ -1648,15 +1673,14 @@ int zd_usb_ioread16v(struct zd_usb *usb,
udev = zd_usb_to_usbdev(usb);
prepare_read_regs_int(usb);
- r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
- req, req_len, &actual_req_len, 50 /* ms */);
+ r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
if (r) {
dev_dbg_f(zd_usb_dev(usb),
- "error in usb_interrupt_msg(). Error number %d\n", r);
+ "error in zd_ep_regs_out_msg(). Error number %d\n", r);
goto error;
}
if (req_len != actual_req_len) {
- dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()\n"
+ dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n"
" req_len %d != actual_req_len %d\n",
req_len, actual_req_len);
r = -EIO;
@@ -1818,9 +1842,17 @@ int zd_usb_iowrite16v_async(struct zd_us
rw->value = cpu_to_le16(ioreqs[i].value);
}
- usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
- req, req_len, iowrite16v_urb_complete, usb,
- ep->desc.bInterval);
+ /* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode
+ * endpoint is bulk. Select correct type URB by endpoint descriptor.
+ */
+ if (usb_endpoint_xfer_int(&ep->desc))
+ usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
+ req, req_len, iowrite16v_urb_complete, usb,
+ ep->desc.bInterval);
+ else
+ usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT),
+ req, req_len, iowrite16v_urb_complete, usb);
+
urb->transfer_flags |= URB_FREE_BUFFER;
/* Submit previous URB */
@@ -1924,15 +1956,14 @@ int zd_usb_rfwrite(struct zd_usb *usb, u
}
udev = zd_usb_to_usbdev(usb);
- r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
- req, req_len, &actual_req_len, 50 /* ms */);
+ r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
if (r) {
dev_dbg_f(zd_usb_dev(usb),
- "error in usb_interrupt_msg(). Error number %d\n", r);
+ "error in zd_ep_regs_out_msg(). Error number %d\n", r);
goto out;
}
if (req_len != actual_req_len) {
- dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()"
+ dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()"
" req_len %d != actual_req_len %d\n",
req_len, actual_req_len);
r = -EIO;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists