linux-kernel - [PATCH 8/8 v3] x86, UV: correct UV2 BAU destination timeout

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <E1QXBUa-0004gn-5r@eag09.americas.sgi.com>
Date:	Thu, 16 Jun 2011 07:16:12 -0500
From:	Cliff Wickman <cpw@....com>
To:	linux-kernel@...r.kernel.org
Cc:	mingo@...e.hu
Subject: [PATCH 8/8 v3] x86, UV: correct UV2 BAU destination timeout

From: Cliff Wickman <cpw@....com>

Correct the UV2 broacast assist unit's destination timeout period.
  The period is set in 4 bits of memory-mapped register MISC_CONTROL.
  The left bit toggles base period between 10us and 80us.
  The other 3 bits are the multiplier.
Decimal 15, hex f, gives the maximum: 7 * 80us

And the activation status register in UV2 should be tested for a destination
timeout with a 4, not a 2.  The values for Active versus Timeout were reversed.

This patch is critical for TLB shootdown on an Altix UV2 system (i.e. the
follow-on to the current Altix UV).

Diffed against 3.0.0-rc3
Signed-off-by: Cliff Wickman <cpw@....com>

---
 arch/x86/include/asm/uv/uv_bau.h |   18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

Index: linux/arch/x86/include/asm/uv/uv_bau.h
===================================================================
--- linux.orig/arch/x86/include/asm/uv/uv_bau.h
+++ linux/arch/x86/include/asm/uv/uv_bau.h
@@ -67,7 +67,7 @@
  *  we're using 655us, similar to UV1: 65 units of 10us
  */
 #define UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD (9UL)
-#define UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD (65*10UL)
+#define UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD (15UL)
 
 #define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD	(is_uv1_hub() ?			\
 		UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD :			\
@@ -106,12 +106,20 @@
 #define DS_SOURCE_TIMEOUT		3
 /*
  * bits put together from HRP_LB_BAU_SB_ACTIVATION_STATUS_0/1/2
- * values 1 and 5 will not occur
+ * values 1 and 3 will not occur
+ *        Decoded meaning              ERROR  BUSY    AUX ERR
+ * -------------------------------     ----   -----   -------
+ * IDLE                                 0       0        0
+ * BUSY (active)                        0       1        0
+ * SW Ack Timeout (destination)         1       0        0
+ * SW Ack INTD rejected (strong NACK)   1       0        1
+ * Source Side Time Out Detected        1       1        0
+ * Destination Side PUT Failed          1       1        1
  */
 #define UV2H_DESC_IDLE			0
-#define UV2H_DESC_DEST_TIMEOUT		2
-#define UV2H_DESC_DEST_STRONG_NACK	3
-#define UV2H_DESC_BUSY			4
+#define UV2H_DESC_BUSY			2
+#define UV2H_DESC_DEST_TIMEOUT		4
+#define UV2H_DESC_DEST_STRONG_NACK	5
 #define UV2H_DESC_SOURCE_TIMEOUT	6
 #define UV2H_DESC_DEST_PUT_ERR		7
 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/