| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1308640714-17961-5-git-send-email-ohad@wizery.com>
Date: Tue, 21 Jun 2011 10:18:30 +0300
From: Ohad Ben-Cohen <ohad@...ery.com>
To: <linux-omap@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Cc: <akpm@...ux-foundation.org>, Brian Swetland <swetland@...gle.com>,
Arnd Bergmann <arnd@...db.de>,
Grant Likely <grant.likely@...retlab.ca>,
davinci-linux-open-source
<davinci-linux-open-source@...ux.davincidsp.com>,
Rusty Russell <rusty@...tcorp.com.au>,
"Guzman Lugo, Fernando" <fernando.lugo@...com>,
Ohad Ben-Cohen <ohad@...ery.com>
Subject: [RFC 4/8] omap: add remoteproc devices
From: Guzman Lugo, Fernando <fernando.lugo@...com>
Add omap remoteproc devices for the ipu and dsp remote processors.
TODO:
- rework to use CMA instead of reserving memory at boot
[ohad@...ery.com: commit log, refactored and simplified, still wip]
Signed-off-by: Guzman Lugo, Fernando <fernando.lugo@...com>
Signed-off-by: Ohad Ben-Cohen <ohad@...ery.com>
---
arch/arm/mach-omap2/Makefile | 2 +
arch/arm/mach-omap2/remoteproc.c | 159 ++++++++++++++++++++++++++++++++++++++
2 files changed, 161 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap2/remoteproc.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b148077..2b04fe6 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -270,3 +270,5 @@ disp-$(CONFIG_OMAP2_DSS) := display.o
obj-y += $(disp-m) $(disp-y)
obj-y += common-board-devices.o
+
+obj-$(CONFIG_OMAP_REMOTE_PROC) += remoteproc.o
diff --git a/arch/arm/mach-omap2/remoteproc.c b/arch/arm/mach-omap2/remoteproc.c
new file mode 100644
index 0000000..4f846cb
--- /dev/null
+++ b/arch/arm/mach-omap2/remoteproc.c
@@ -0,0 +1,159 @@
+/*
+ * Remote processor machine-specific module for OMAP4
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/remoteproc.h>
+#include <linux/memblock.h>
+
+#include <plat/omap_device.h>
+#include <plat/omap_hwmod.h>
+#include <plat/remoteproc.h>
+#include <plat/dsp.h>
+#include <plat/io.h>
+
+#define L4_PERIPHERAL_L4CFG (L4_44XX_BASE)
+#define IPU_PERIPHERAL_L4CFG 0xAA000000
+
+#define IPU_MEM_TEXT 0x0
+#define IPU_MEM_DATA 0x80000000
+#define IPU_MEM_IPC 0xA0000000
+
+/*
+ * Memory mappings for the remote M3 subsystem
+ *
+ * Don't change the device addresses (first parameter), otherwise you'd have
+ * to update the firmware (BIOS image) accordingly.
+ *
+ * A 0 physical address (second parameter) means this physical region should
+ * be dynamically carved out at boot time.
+ *
+ * Sizes should be in the form of 2 ^ n * PAGE_SIZE (where n = 0, 1, 2, ...)
+ *
+ * Alignment requirement: at least page-based
+ */
+static struct rproc_mem_entry ipu_memory_maps[] = {
+ {IPU_MEM_IPC, 0, SZ_1M}, /* keep this IPC region first */
+ {IPU_MEM_TEXT, 0, SZ_4M},
+ {IPU_MEM_DATA, 0, SZ_32M},
+ {IPU_PERIPHERAL_L4CFG, L4_PERIPHERAL_L4CFG, SZ_16M},
+ { }
+};
+
+static struct omap_rproc_pdata omap4_rproc_data[] = {
+ {
+ .name = "dsp",
+ .iommu_name = "tesla",
+ .firmware = "tesla-dsp.bin",
+ .oh_name = "dsp_c0",
+ },
+ {
+ .name = "ipu",
+ .iommu_name = "ducati",
+ .firmware = "ducati-m3.bin",
+ .oh_name = "ipu_c0",
+ .oh_name_opt = "ipu_c1",
+ .memory_maps = ipu_memory_maps,
+ },
+};
+
+static struct omap_device_pm_latency omap_rproc_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ },
+};
+
+static int __init omap_rproc_init(void)
+{
+ const char *pdev_name = "omap-rproc";
+ struct omap_hwmod *oh[2];
+ struct omap_device *od;
+ int i, ret = 0, oh_count;
+ phys_addr_t paddr, size;
+
+ /* names like ipu_cx/dsp_cx might show up on other OMAPs, too */
+ if (!cpu_is_omap44xx())
+ return 0;
+
+ paddr = omap_dsp_get_mempool_base();
+ size = omap_dsp_get_mempool_size();
+ if (!paddr || !size) {
+ pr_warn("carveout memory is unavailable: 0x%x, 0x%x\n",
+ paddr, size);
+ return -ENOMEM;
+ }
+
+ /* dynamically allocate carveout memory as required by the ipu */
+ for (i = 0; i < ARRAY_SIZE(ipu_memory_maps); i++) {
+ struct rproc_mem_entry *me = &ipu_memory_maps[i];
+
+ if (!me->pa && me->size) {
+ if (me->size > size) {
+ pr_warn("out of carveout memory\n");
+ return -ENOMEM;
+ }
+
+ me->pa = paddr;
+ paddr += me->size;
+ size -= me->size;
+
+ pr_info("0x%x bytes at 0x%x %d\n", me->size, me->pa, i);
+ }
+ }
+
+ /* build the remote proc devices */
+ for (i = 0; i < ARRAY_SIZE(omap4_rproc_data); i++) {
+ const char *oh_name = omap4_rproc_data[i].oh_name;
+ const char *oh_name_opt = omap4_rproc_data[i].oh_name_opt;
+ oh_count = 0;
+
+ oh[0] = omap_hwmod_lookup(oh_name);
+ if (!oh[0]) {
+ pr_err("could not look up %s\n", oh_name);
+ continue;
+ }
+ oh_count++;
+
+ /* ipu has a secondary hwmod entry */
+ if (oh_name_opt) {
+ oh[1] = omap_hwmod_lookup(oh_name_opt);
+ if (!oh[1]) {
+ pr_err("could not look up %s\n", oh_name_opt);
+ continue;
+ }
+ oh_count++;
+ }
+
+ od = omap_device_build_ss(pdev_name, i, oh, oh_count,
+ &omap4_rproc_data[i],
+ sizeof(struct omap_rproc_pdata),
+ omap_rproc_latency,
+ ARRAY_SIZE(omap_rproc_latency),
+ false);
+ if (IS_ERR(od)) {
+ pr_err("Could not build omap_device for %s:%s\n",
+ pdev_name, oh_name);
+ ret = PTR_ERR(od);
+ }
+ }
+
+ return ret;
+}
+/* must be ready in time for device_initcall users */
+subsys_initcall(omap_rproc_init);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists