| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1308663556-29120-5-git-send-email-peter.ujfalusi@ti.com>
Date: Tue, 21 Jun 2011 16:39:02 +0300
From: Peter Ujfalusi <peter.ujfalusi@...com>
To: Liam Girdwood <lrg@...com>, Tony Lindgren <tony@...mide.com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>
CC: linux-input@...r.kernel.org, linux-omap@...r.kernel.org,
linux-kernel@...r.kernel.org, alsa-devel@...a-project.org,
Peter Ujfalusi <peter.ujfalusi@...com>
Subject: [PATCH v6 04/18] OMAP3: Move common regulator configuration to twl-common
Some regulator config can be moved out from board files,
since they are close to identical.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
arch/arm/mach-omap2/board-3430sdp.c | 51 ++++----------------------
arch/arm/mach-omap2/board-cm-t35.c | 41 +++------------------
arch/arm/mach-omap2/board-devkit8000.c | 21 +----------
arch/arm/mach-omap2/board-igep0020.c | 28 +++------------
arch/arm/mach-omap2/board-omap3beagle.c | 44 ++--------------------
arch/arm/mach-omap2/board-omap3evm.c | 47 +++---------------------
arch/arm/mach-omap2/board-omap3pandora.c | 44 ++++------------------
arch/arm/mach-omap2/board-omap3stalker.c | 48 +++---------------------
arch/arm/mach-omap2/board-omap3touchbook.c | 40 ++++----------------
arch/arm/mach-omap2/board-overo.c | 44 ++--------------------
arch/arm/mach-omap2/board-rx51-peripherals.c | 25 ++-----------
arch/arm/mach-omap2/board-zoom-peripherals.c | 41 ++-------------------
arch/arm/mach-omap2/twl-common.c | 42 +++++++++++++++++++++
arch/arm/mach-omap2/twl-common.h | 5 +++
14 files changed, 109 insertions(+), 412 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 4810dcc..d944a56 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -283,16 +283,6 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
};
-static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -409,36 +399,6 @@ static struct regulator_init_data sdp3430_vsim = {
.consumer_supplies = sdp3430_vsim_supplies,
};
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data sdp3430_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies),
- .consumer_supplies = sdp3430_vdda_dac_supplies,
-};
-
-static struct regulator_init_data sdp3430_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies),
- .consumer_supplies = sdp3430_vpll2_supplies,
-};
-
static struct twl4030_platform_data sdp3430_twldata = {
/* platform_data for children goes here */
.gpio = &sdp3430_gpio_data,
@@ -451,16 +411,19 @@ static struct twl4030_platform_data sdp3430_twldata = {
.vmmc1 = &sdp3430_vmmc1,
.vmmc2 = &sdp3430_vmmc2,
.vsim = &sdp3430_vsim,
- .vdac = &sdp3430_vdac,
- .vpll2 = &sdp3430_vpll2,
};
static int __init omap3430_i2c_init(void)
{
/* i2c1 for PMIC only */
omap3_pmic_get_config(&sdp3430_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
- TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+ TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+ sdp3430_twldata.vdac->constraints.apply_uV = true;
+ sdp3430_twldata.vpll2->constraints.apply_uV = true;
+ sdp3430_twldata.vpll2->constraints.name = "VDVI";
+
omap3_pmic_init("twl4030", &sdp3430_twldata);
/* i2c2 on camera connector (for sensor control) and optional isp1301 */
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e867474..2ae6afe 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -345,9 +345,6 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = {
.supply = "vmmc_aux",
};
-static struct regulator_consumer_supply cm_t35_vdac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
static struct regulator_consumer_supply cm_t35_vdvi_supply =
REGULATOR_SUPPLY("vdvi", "omapdss");
@@ -381,35 +378,6 @@ static struct regulator_init_data cm_t35_vsim = {
.consumer_supplies = &cm_t35_vsim_supply,
};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data cm_t35_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cm_t35_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data cm_t35_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cm_t35_vdvi_supply,
-};
-
static uint32_t cm_t35_keymap[] = {
KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT),
KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN),
@@ -497,13 +465,16 @@ static struct twl4030_platform_data cm_t35_twldata = {
.gpio = &cm_t35_gpio_data,
.vmmc1 = &cm_t35_vmmc1,
.vsim = &cm_t35_vsim,
- .vdac = &cm_t35_vdac,
- .vpll2 = &cm_t35_vpll2,
};
static void __init cm_t35_init_i2c(void)
{
- omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, 0);
+ omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+ cm_t35_twldata.vpll2->constraints.name = "VDVI";
+ cm_t35_twldata.vpll2->num_consumer_supplies = 1;
+ cm_t35_twldata.vpll2->consumer_supplies = &cm_t35_vdvi_supply;
+
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index aa6a173..f7bc171 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -186,9 +186,6 @@ static struct omap_dss_board_info devkit8000_dss_data = {
.default_device = &devkit8000_lcd_device,
};
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_1),
KEY(1, 0, KEY_2),
@@ -288,20 +285,6 @@ static struct regulator_init_data devkit8000_vmmc1 = {
.consumer_supplies = &devkit8000_vmmc1_supply,
};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data devkit8000_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &devkit8000_vdda_dac_supply,
-};
-
/* VPLL1 for digital video outputs */
static struct regulator_init_data devkit8000_vpll1 = {
.constraints = {
@@ -335,7 +318,6 @@ static struct twl4030_platform_data devkit8000_twldata = {
/* platform_data for children goes here */
.gpio = &devkit8000_gpio_data,
.vmmc1 = &devkit8000_vmmc1,
- .vdac = &devkit8000_vdac,
.vpll1 = &devkit8000_vpll1,
.vio = &devkit8000_vio,
.keypad = &devkit8000_kp_data,
@@ -344,7 +326,8 @@ static struct twl4030_platform_data devkit8000_twldata = {
static int __init devkit8000_i2c_init(void)
{
omap3_pmic_get_config(&devkit8000_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC);
omap3_pmic_init("tps65930", &devkit8000_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index bb3723a..48f86e1 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -476,26 +476,6 @@ static struct omap_dss_board_info igep2_dss_data = {
.default_device = &igep2_dvi_device,
};
-static struct regulator_consumer_supply igep2_vpll2_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data igep2_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies),
- .consumer_supplies = igep2_vpll2_supplies,
-};
-
static void __init igep2_display_init(void)
{
int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
@@ -576,9 +556,11 @@ static void __init igep_i2c_init(void)
pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
igep_twldata.keypad = &igep2_keypad_pdata;
- igep_twldata.vpll2 = &igep2_vpll2;
- /* Use common codec data */
- omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
+ /* Get common pmic data */
+ omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VPLL2);
+ igep_twldata.vpll2->constraints.apply_uV = true;
+ igep_twldata.vpll2->constraints.name = "VDVI";
}
omap3_pmic_init("twl4030", &igep_twldata);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 63104e8..ff991ca 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -210,14 +210,6 @@ static struct omap_dss_board_info beagle_dss_data = {
.default_device = &beagle_dvi_device,
};
-static struct regulator_consumer_supply beagle_vdac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
static void __init beagle_display_init(void)
{
int r;
@@ -355,42 +347,11 @@ static struct regulator_init_data beagle_vsim = {
.consumer_supplies = &beagle_vsim_supply,
};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data beagle_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data beagle_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies),
- .consumer_supplies = beagle_vdvi_supplies,
-};
-
static struct twl4030_platform_data beagle_twldata = {
/* platform_data for children goes here */
.gpio = &beagle_gpio_data,
.vmmc1 = &beagle_vmmc1,
.vsim = &beagle_vsim,
- .vdac = &beagle_vdac,
- .vpll2 = &beagle_vpll2,
};
static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
@@ -402,7 +363,10 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
static int __init omap3_beagle_i2c_init(void)
{
omap3_pmic_get_config(&beagle_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+ beagle_twldata.vpll2->constraints.name = "VDVI";
+
omap3_pmic_init("twl4030", &beagle_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3e7e902..e6fa723 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -434,44 +434,6 @@ static struct twl4030_keypad_data omap3evm_kp_data = {
.rep = 1,
};
-static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data omap3_evm_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3_evm_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data omap3_evm_vpll2 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies),
- .consumer_supplies = omap3_evm_vpll2_supplies,
-};
-
/* ads7846 on SPI */
static struct regulator_consumer_supply omap3evm_vio_supply =
REGULATOR_SUPPLY("vcc", "spi1.0");
@@ -536,8 +498,6 @@ static struct twl4030_platform_data omap3evm_twldata = {
/* platform_data for children goes here */
.keypad = &omap3evm_kp_data,
.gpio = &omap3evm_gpio_data,
- .vdac = &omap3_evm_vdac,
- .vpll2 = &omap3_evm_vpll2,
.vio = &omap3evm_vio,
.vmmc1 = &omap3evm_vmmc1,
.vsim = &omap3evm_vsim,
@@ -546,8 +506,11 @@ static struct twl4030_platform_data omap3evm_twldata = {
static int __init omap3_evm_i2c_init(void)
{
omap3_pmic_get_config(&omap3evm_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
- TWL_COMMON_PDATA_AUDIO, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+ TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+ omap3evm_twldata.vdac->constraints.apply_uV = true;
+ omap3evm_twldata.vpll2->constraints.apply_uV = true;
omap3_pmic_init("twl4030", &omap3evm_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7bfe109..db8b206 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -329,9 +329,6 @@ static struct regulator_consumer_supply pandora_vmmc2_supply =
static struct regulator_consumer_supply pandora_vmmc3_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2");
-static struct regulator_consumer_supply pandora_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
static struct regulator_consumer_supply pandora_vdds_supplies[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
@@ -384,36 +381,6 @@ static struct regulator_init_data pandora_vmmc2 = {
.consumer_supplies = &pandora_vmmc2_supply,
};
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data pandora_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &pandora_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data pandora_vpll2 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies),
- .consumer_supplies = pandora_vdds_supplies,
-};
-
/* VAUX1 for LCD */
static struct regulator_init_data pandora_vaux1 = {
.constraints = {
@@ -507,8 +474,6 @@ static struct twl4030_platform_data omap3pandora_twldata = {
.gpio = &omap3pandora_gpio_data,
.vmmc1 = &pandora_vmmc1,
.vmmc2 = &pandora_vmmc2,
- .vdac = &pandora_vdac,
- .vpll2 = &pandora_vpll2,
.vaux1 = &pandora_vaux1,
.vaux2 = &pandora_vaux2,
.vaux4 = &pandora_vaux4,
@@ -527,7 +492,14 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
static int __init omap3pandora_i2c_init(void)
{
omap3_pmic_get_config(&omap3pandora_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+ omap3pandora_twldata.vdac->constraints.apply_uV = true;
+ omap3pandora_twldata.vpll2->constraints.apply_uV = true;
+ omap3pandora_twldata.vpll2->num_consumer_supplies =
+ ARRAY_SIZE(pandora_vdds_supplies);
+ omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
+
omap3_pmic_init("tps65950", &omap3pandora_twldata);
/* i2c2 pins are not connected */
omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 2b52281..e40e08c 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -388,51 +388,10 @@ static struct twl4030_keypad_data omap3stalker_kp_data = {
.rep = 1,
};
-static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data omap3_stalker_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3_stalker_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data omap3_stalker_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies),
- .consumer_supplies = omap3_stalker_vpll2_supplies,
-};
-
static struct twl4030_platform_data omap3stalker_twldata = {
/* platform_data for children goes here */
.keypad = &omap3stalker_kp_data,
.gpio = &omap3stalker_gpio_data,
- .vdac = &omap3_stalker_vdac,
- .vpll2 = &omap3_stalker_vpll2,
.vmmc1 = &omap3stalker_vmmc1,
.vsim = &omap3stalker_vsim,
};
@@ -455,7 +414,12 @@ static int __init omap3_stalker_i2c_init(void)
{
omap3_pmic_get_config(&omap3stalker_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
- TWL_COMMON_PDATA_AUDIO, 0);
+ TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+ omap3stalker_twldata.vdac->constraints.apply_uV = true;
+ omap3stalker_twldata.vpll2->constraints.apply_uV = true;
+ omap3stalker_twldata.vpll2->constraints.name = "VDVI";
+
omap3_pmic_init("twl4030", &omap3stalker_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 094ea80..a0a3cf0 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -207,42 +207,11 @@ static struct regulator_init_data touchbook_vsim = {
.consumer_supplies = &touchbook_vsim_supply,
};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data touchbook_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &touchbook_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data touchbook_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &touchbook_vdvi_supply,
-};
-
static struct twl4030_platform_data touchbook_twldata = {
/* platform_data for children goes here */
.gpio = &touchbook_gpio_data,
.vmmc1 = &touchbook_vmmc1,
.vsim = &touchbook_vsim,
- .vdac = &touchbook_vdac,
- .vpll2 = &touchbook_vpll2,
};
static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
@@ -255,7 +224,14 @@ static int __init omap3_touchbook_i2c_init(void)
{
/* Standard TouchBook bus */
omap3_pmic_get_config(&touchbook_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+ touchbook_twldata.vdac->num_consumer_supplies = 1;
+ touchbook_twldata.vdac->consumer_supplies = &touchbook_vdac_supply;
+ touchbook_twldata.vpll2->constraints.name = "VDVI";
+ touchbook_twldata.vpll2->num_consumer_supplies = 1;
+ touchbook_twldata.vpll2->consumer_supplies = &touchbook_vdvi_supply;
+
omap3_pmic_init("twl4030", &touchbook_twldata);
/* Additional TouchBook bus */
omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f334829..e3fa177 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -264,14 +264,6 @@ static struct omap_dss_board_info overo_dss_data = {
.default_device = &overo_dvi_device,
};
-static struct regulator_consumer_supply overo_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
@@ -447,46 +439,18 @@ static struct regulator_init_data overo_vmmc1 = {
.consumer_supplies = &overo_vmmc1_supply,
};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data overo_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &overo_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data overo_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply),
- .consumer_supplies = overo_vdds_dsi_supply,
-};
-
static struct twl4030_platform_data overo_twldata = {
.gpio = &overo_gpio_data,
.vmmc1 = &overo_vmmc1,
- .vdac = &overo_vdac,
- .vpll2 = &overo_vpll2,
};
static int __init overo_i2c_init(void)
{
omap3_pmic_get_config(&overo_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+ overo_twldata.vpll2->constraints.name = "VDVI";
+
omap3_pmic_init("tps65950", &overo_twldata);
/* i2c2 pins are used for gpio */
omap_register_i2c_bus(3, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index dc69a7f..dfaf874 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -391,10 +391,6 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
REGULATOR_SUPPLY("vdd", "2-0063"),
};
-static struct regulator_consumer_supply rx51_vdac_supply[] = {
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
static struct regulator_init_data rx51_vaux1 = {
.constraints = {
.name = "V28",
@@ -511,21 +507,6 @@ static struct regulator_init_data rx51_vsim = {
.consumer_supplies = &rx51_vsim_supply,
};
-static struct regulator_init_data rx51_vdac = {
- .constraints = {
- .name = "VDAC",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = rx51_vdac_supply,
-};
-
static struct regulator_init_data rx51_vio = {
.constraints = {
.min_uV = 1800000,
@@ -778,7 +759,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
.vsim = &rx51_vsim,
- .vdac = &rx51_vdac,
.vio = &rx51_vio,
};
@@ -835,7 +815,10 @@ static int __init rx51_i2c_init(void)
}
rx51_twldata.vmmc2 = &rx51_vmmc2;
omap3_pmic_get_config(&rx51_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
+ TWL_COMMON_REGULATOR_VDAC);
+ rx51_twldata.vdac->constraints.apply_uV = true;
+ rx51_twldata.vdac->constraints.name = "VDAC";
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 58c0c6e..8853dc4 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -227,40 +227,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
-static struct regulator_consumer_supply zoom_vpll2_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_consumer_supply zoom_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-static struct regulator_init_data zoom_vpll2 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(zoom_vpll2_supplies),
- .consumer_supplies = zoom_vpll2_supplies,
-};
-
-static struct regulator_init_data zoom_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &zoom_vdda_dac_supply,
-};
-
static int zoom_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -306,15 +272,14 @@ static struct twl4030_platform_data zoom_twldata = {
.vmmc1 = &zoom_vmmc1,
.vmmc2 = &zoom_vmmc2,
.vsim = &zoom_vsim,
- .vpll2 = &zoom_vpll2,
- .vdac = &zoom_vdac,
};
static int __init omap_i2c_init(void)
{
omap3_pmic_get_config(&zoom_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
- TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+ TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
if (machine_is_omap_zoom2()) {
struct twl4030_codec_audio_data *audio_data;
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 2487e3c..f15f880 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -87,6 +87,41 @@ static struct twl4030_codec_data omap3_codec_pdata = {
.audio = &omap3_audio,
};
+static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {
+ REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
+
+static struct regulator_init_data omap3_vdac_idata = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(omap3_vdda_dac_supplies),
+ .consumer_supplies = omap3_vdda_dac_supplies,
+};
+
+static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
+
+static struct regulator_init_data omap3_vpll2_idata = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(omap3_vpll2_supplies),
+ .consumer_supplies = omap3_vpll2_supplies,
+};
+
static struct regulator_init_data omap4_vdac_idata = {
.constraints = {
.min_uV = 1800000,
@@ -259,4 +294,11 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->codec)
pmic_data->codec = &omap3_codec_pdata;
+
+ /* Common regulator configurations */
+ if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
+ pmic_data->vdac = &omap3_vdac_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
+ pmic_data->vpll2 = &omap3_vpll2_idata;
}
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 3b4b05d..5e83a5b 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -21,6 +21,11 @@
#define TWL_COMMON_REGULATOR_VUSB (1 << 9)
#define TWL_COMMON_REGULATOR_CLK32KG (1 << 10)
+/* TWL4030 LDO regulators */
+#define TWL_COMMON_REGULATOR_VPLL1 (1 << 4)
+#define TWL_COMMON_REGULATOR_VPLL2 (1 << 5)
+
+
struct twl4030_platform_data;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
--
1.7.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists