| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BANLkTi=7ghz2QuZrEcEskQkNq0Tks8GbeA@mail.gmail.com>
Date: Wed, 22 Jun 2011 09:56:06 +0100
From: Maxin B John <maxin.john@...il.com>
To: Sangbeom Kim <sbkim73@...sung.com>
Cc: sameo@...ux.intel.com, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] mfd: Add I2C control support for S5M8751
Hi,
On Wed, Jun 22, 2011 at 6:53 AM, Sangbeom Kim <sbkim73@...sung.com> wrote:
> Implement the I2C control interface for the S5M8751.
>
> Signed-off-by: Sangbeom Kim <sbkim73@...sung.com>
> ---
> drivers/mfd/Kconfig | 9 +++
> drivers/mfd/Makefile | 2 +
> drivers/mfd/s5m8751-i2c.c | 141 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 152 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mfd/s5m8751-i2c.c
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 85c91ac..4a8468c 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -388,6 +388,15 @@ config MFD_WM831X_SPI
> config MFD_S5M8751
> tristate
>
> +config MFD_S5M8751_I2C
> + tristate "Support Samsung S5M8751 PMIC/Audio DAC with I2C"
> + select MFD_S5M8751
> + select MFD_CORE
> + depends on I2C
> + help
> + S5M8751 is an advanced power management with AUDIO DAC. This option
> + enables chip support for the S5M8751 with I2C as the control interface.
> +
> config MFD_WM8350
> bool
> depends on GENERIC_HARDIRQS
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 27f99bb..b94476e 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -96,3 +96,5 @@ obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
> obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o
> s5m8751-objs += s5m8751-core.o
> obj-$(CONFIG_MFD_S5M8751) += s5m8751.o
> +obj-$(CONFIG_MFD_S5M8751_I2C) += s5m8751-i2c.o
> +
> diff --git a/drivers/mfd/s5m8751-i2c.c b/drivers/mfd/s5m8751-i2c.c
> new file mode 100644
> index 0000000..4ca680b
> --- /dev/null
> +++ b/drivers/mfd/s5m8751-i2c.c
> @@ -0,0 +1,141 @@
> +/* linux/drivers/mfd/s5m8751-i2s.c
> + *
> + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * I2C driver for S5M8751
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/i2c.h>
> +#include <linux/mfd/s5m8751.h>
> +#include <linux/slab.h>
> +
> +static int s5m8751_i2c_read_device(struct s5m8751 *s5m8751, uint8_t reg,
> + uint8_t *val)
> +{
> + int ret;
> + ret = i2c_smbus_read_byte_data(s5m8751->i2c_client, reg);
> + if (ret < 0) {
> + dev_err(s5m8751->dev, "failed reading at 0x%02x\n", reg);
> + return ret;
> + }
> + *val = (uint8_t)ret;
> + return 0;
> +}
> +
> +static int s5m8751_i2c_write_device(struct s5m8751 *s5m8751, uint8_t reg,
> + uint8_t val)
> +{
> + int ret;
> + ret = i2c_smbus_write_byte_data(s5m8751->i2c_client, reg, val);
> + if (ret < 0) {
> + dev_err(s5m8751->dev, "failed writing 0x%02x to 0x%02x\n",
> + val, reg);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int s5m8751_i2c_write_block_device(struct s5m8751 *s5m8751, uint8_t reg,
> + int len, uint8_t *val)
> +{
> + int ret;
> + ret = i2c_smbus_write_i2c_block_data(s5m8751->i2c_client, reg, len,
> + val);
> + if (ret < 0) {
> + dev_err(s5m8751->dev, "failed writings to 0x%02x\n", reg);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int s5m8751_i2c_read_block_device(struct s5m8751 *s5m8751, uint8_t reg,
> + int len, uint8_t *val)
> +{
> + int ret;
> + ret = i2c_smbus_read_i2c_block_data(s5m8751->i2c_client, reg, len, val);
> + if (ret < 0) {
> + dev_err(s5m8751->dev, "failed reading from 0x%02x\n", reg);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int s5m8751_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct s5m8751 *s5m8751;
> + int ret = 0;
> +
> + s5m8751 = kzalloc(sizeof(struct s5m8751), GFP_KERNEL);
> + if (s5m8751 == NULL)
> + goto err;
Just my 2 cents. I think we should return -ENOMEM here.
> +
> + i2c_set_clientdata(i2c, s5m8751);
> +
> + s5m8751->dev = &i2c->dev;
> + s5m8751->i2c_client = i2c;
> + s5m8751->read_dev = s5m8751_i2c_read_device;
> + s5m8751->write_dev = s5m8751_i2c_write_device;
> + s5m8751->read_block_dev = s5m8751_i2c_read_block_device;
> + s5m8751->write_block_dev = s5m8751_i2c_write_block_device;
> +
> + ret = s5m8751_device_init(s5m8751, i2c->irq, i2c->dev.platform_data);
> + if (ret < 0)
> + goto err;
> +
> + return 0;
> +
> +err:
> + return ret;
> +}
> +
> +static int s5m8751_remove(struct i2c_client *i2c)
> +{
> + struct s5m8751 *s5m8751 = i2c_get_clientdata(i2c);
> +
> + s5m8751_device_exit(s5m8751);
I think we should free the s5m8751 here to avoid memory leaks.
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id s5m8751_i2c_id[] = {
> + { "s5m8751", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, s5m8751_i2c_id);
> +
> +static struct i2c_driver s5m8751_driver = {
> + .driver = {
> + .name = "s5m8751",
> + .owner = THIS_MODULE,
> + },
> + .probe = s5m8751_probe,
> + .remove = s5m8751_remove,
> + .id_table = s5m8751_i2c_id,
> +};
> +
> +static int __init s5m8751_init(void)
> +{
> + return i2c_add_driver(&s5m8751_driver);
> +}
> +module_init(s5m8751_init);
> +
> +static void __exit s5m8751_exit(void)
> +{
> + i2c_del_driver(&s5m8751_driver);
> +}
> +module_exit(s5m8751_exit);
> +
> +MODULE_DESCRIPTION("I2C Driver for Samsung S5M8751");
> +MODULE_AUTHOR("Sangbeom Kim <sbkim73@...sung.com>");
> +MODULE_LICENSE("GPL");
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists