| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 23 Jun 2011 11:39:20 -0700
From: Joe Perches <joe@...ches.com>
To: Jiri Kosina <trivial@...nel.org>
Cc: linux-kernel@...r.kernel.org
Subject: [Trivial next 2/2] treewide: transciever/transceiver spelling fixes
Just tyops.
Signed-off-by: Joe Perches <joe@...ches.com>
---
arch/arm/mach-pxa/include/mach/corgi.h | 2 +-
arch/arm/mach-pxa/include/mach/pxa27x-udc.h | 4 ++--
arch/arm/mach-ux500/board-mop500-regulators.c | 2 +-
drivers/i2c/busses/i2c-highlander.c | 2 +-
drivers/net/eexpress.c | 2 +-
drivers/net/irda/toim3232-sir.c | 2 +-
drivers/net/natsemi.c | 2 +-
drivers/tty/serial/8250_pci.c | 2 +-
drivers/usb/gadget/pxa27x_udc.h | 4 ++--
drivers/usb/musb/musb_core.c | 2 +-
drivers/usb/otg/isp1301_omap.c | 4 ++--
sound/pci/ice1712/ice1712.c | 2 +-
12 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 0011055..5dfd119 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -34,7 +34,7 @@
#define CORGI_GPIO_LCDCON_CS (19) /* LCD Control Chip Select */
#define CORGI_GPIO_MAX1111_CS (20) /* MAX1111 Chip Select */
#define CORGI_GPIO_ADC_TEMP_ON (21) /* Select battery voltage or temperature */
-#define CORGI_GPIO_IR_ON (22) /* Enable IR Transciever */
+#define CORGI_GPIO_IR_ON (22) /* Enable IR Transceiver */
#define CORGI_GPIO_ADS7846_CS (24) /* ADS7846 Chip Select */
#define CORGI_GPIO_SD_PWR (33) /* MMC/SD Power */
#define CORGI_GPIO_CHRG_ON (38) /* Enable battery Charging */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
index ab1443f..4cf28f6 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
@@ -56,9 +56,9 @@
#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXR (1 << 17) /* Extra Transceiver Interrupt
Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXF (1 << 16) /* Extra Transceiver Interrupt
Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
Interrupt Enable */
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index c0bc833..2735d03 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -77,7 +77,7 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
/* SoC core supply, no device */
REGULATOR_SUPPLY("v-intcore", NULL),
- /* USB Transciever */
+ /* USB Transceiver */
REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
};
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index 3df1bc8..3876a24 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -227,7 +227,7 @@ static int highlander_i2c_read(struct highlander_i2c_dev *dev)
/*
* The R0P7780LC0011RL FPGA needs a significant delay between
- * data read cycles, otherwise the transciever gets confused and
+ * data read cycles, otherwise the transceiver gets confused and
* garbage is returned when the read is subsequently aborted.
*
* It is not sufficient to wait for BBSY.
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 48ee51b..a192285 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -365,7 +365,7 @@ static int __init do_express_probe(struct net_device *dev)
dev->irq = mca_irqmap[(pos1>>4)&0x7];
/*
- * XXX: Transciever selection is done
+ * XXX: Transceiver selection is done
* differently on the MCA version.
* How to get it to select something
* other than external/AUI is currently
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
index 99e1ec0..19ad460 100644
--- a/drivers/net/irda/toim3232-sir.c
+++ b/drivers/net/irda/toim3232-sir.c
@@ -78,7 +78,7 @@
* Target hardware: IRWave IR320ST-2
*
* The IRWave IR320ST-2 is a simple dongle based on the Vishay/Temic
- * TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transciever.
+ * TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transceiver.
* It uses a hex inverter and some discrete components to buffer and
* line convert the RS232 down to 5V.
*
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index b78be08..ab28629 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -2919,7 +2919,7 @@ static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
/*
* If we're ignoring the PHY then autoneg and the internal
- * transciever are really not going to work so don't let the
+ * transceiver are really not going to work so don't let the
* user select them.
*/
if (np->ignore_phy && (ecmd->autoneg == AUTONEG_ENABLE ||
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 2b9a642..6b887d9 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -769,7 +769,7 @@ pci_ni8430_setup(struct serial_private *priv,
len = pci_resource_len(priv->dev, bar);
p = ioremap_nocache(base, len);
- /* enable the transciever */
+ /* enable the transceiver */
writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
p + offset + NI8430_PORTCON);
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index cd16231..b01696e 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -88,9 +88,9 @@
#define UDCISR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXR (1 << 17) /* Extra Transceiver Interrupt
Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
+#define UDCOTGICR_IEXF (1 << 16) /* Extra Transceiver Interrupt
Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
Interrupt Enable */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c71b037..bcbd1ab 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1955,7 +1955,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
* - initializes musb->xceiv, usually by otg_get_transceiver()
* - stops powering VBUS
*
- * There are various transciever configurations. Blackfin,
+ * There are various transceiver configurations. Blackfin,
* DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
* external/discrete ones in various flavors (twl4030 family,
* isp1504, non-OTG, etc) mostly hooking up through ULPI.
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 8c28225..ca9b690 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -660,7 +660,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
int ret = IRQ_NONE;
struct isp1301 *isp = _isp;
- /* update ISP1301 transciever from OTG controller */
+ /* update ISP1301 transceiver from OTG controller */
if (otg_irq & OPRT_CHG) {
omap_writew(OPRT_CHG, OTG_IRQ_SRC);
isp1301_defer_work(isp, WORK_UPDATE_ISP);
@@ -755,7 +755,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
- /* switch driver; the transciever code activates it,
+ /* switch driver; the transceiver code activates it,
* ungating the udc clock or resuming OHCI.
*/
} else if (otg_irq & DRIVER_SWITCH) {
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index be06fb3..0ccc0eb 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -87,7 +87,7 @@ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;/* Enable this card */
static char *model[SNDRV_CARDS];
static int omni[SNDRV_CARDS]; /* Delta44 & 66 Omni I/O support */
-static int cs8427_timeout[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 500}; /* CS8427 S/PDIF transciever reset timeout value in msec */
+static int cs8427_timeout[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 500}; /* CS8427 S/PDIF transceiver reset timeout value in msec */
static int dxr_enable[SNDRV_CARDS]; /* DXR enable for DMX6FIRE */
module_param_array(index, int, NULL, 0444);
--
1.7.6.rc1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists