| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1308948047-20488-1-git-send-email-bfreed@chromium.org>
Date: Fri, 24 Jun 2011 13:40:47 -0700
From: Bryan Freed <bfreed@...omium.org>
To: linux-kernel@...r.kernel.org
Cc: jic23@....ac.uk, jbrenner@...sinc.com, gregkh@...e.de,
arnd@...db.de, linux-iio@...r.kernel.org,
Bryan Freed <bfreed@...omium.org>
Subject: [PATCH v3 1/3] light sensor: Add SMBUS support to the tsl2563 driver.
This is so we can support it on x86 SMBUS adapters.
Since i2c adapters which do not provide an smbus_xfer interface fall
back to using their I2C master_xfer interface, all the i2c_master_send()
calls in this driver are changed to i2c_smbus_*() calls.
This will fail on an i2c adapter that implements a proper subset of
(SMBUS_BYTE | SMBUS_BYTE_DATA | SMBUS_WORD_DATA), but I do not see that
in any of our adapters today.
This results in a few wrapper functions that provide little additional
functionality, so remove them and call the smbus functions directly from
the general driver code.
Signed-off-by: Bryan Freed <bfreed@...omium.org>
---
drivers/staging/iio/light/tsl2563.c | 106 +++++++++++++++--------------------
1 files changed, 45 insertions(+), 61 deletions(-)
diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
index 9cffa2e..c60656f 100644
--- a/drivers/staging/iio/light/tsl2563.c
+++ b/drivers/staging/iio/light/tsl2563.c
@@ -137,37 +137,14 @@ struct tsl2563_chip {
u32 data1;
};
-static int tsl2563_write(struct i2c_client *client, u8 reg, u8 value)
-{
- int ret;
- u8 buf[2];
-
- buf[0] = TSL2563_CMD | reg;
- buf[1] = value;
-
- ret = i2c_master_send(client, buf, sizeof(buf));
- return (ret == sizeof(buf)) ? 0 : ret;
-}
-
-static int tsl2563_read(struct i2c_client *client, u8 reg, void *buf, int len)
-{
- int ret;
- u8 cmd = TSL2563_CMD | reg;
-
- ret = i2c_master_send(client, &cmd, sizeof(cmd));
- if (ret != sizeof(cmd))
- return ret;
-
- return i2c_master_recv(client, buf, len);
-}
-
static int tsl2563_set_power(struct tsl2563_chip *chip, int on)
{
struct i2c_client *client = chip->client;
u8 cmd;
cmd = on ? TSL2563_CMD_POWER_ON : TSL2563_CMD_POWER_OFF;
- return tsl2563_write(client, TSL2563_REG_CTRL, cmd);
+ return i2c_smbus_write_byte_data(client,
+ TSL2563_CMD | TSL2563_REG_CTRL, cmd);
}
/*
@@ -178,36 +155,40 @@ static int tsl2563_get_power(struct tsl2563_chip *chip)
{
struct i2c_client *client = chip->client;
int ret;
- u8 val;
- ret = tsl2563_read(client, TSL2563_REG_CTRL, &val, sizeof(val));
- if (ret != sizeof(val))
+ ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_CTRL);
+ if (ret < 0)
return ret;
- return (val & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON;
+ return (ret & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON;
}
static int tsl2563_configure(struct tsl2563_chip *chip)
{
int ret;
- ret = tsl2563_write(chip->client, TSL2563_REG_TIMING,
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_TIMING,
chip->gainlevel->gaintime);
if (ret)
goto error_ret;
- ret = tsl2563_write(chip->client, TSL2563_REG_HIGHLOW,
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_HIGHLOW,
chip->high_thres & 0xFF);
if (ret)
goto error_ret;
- ret = tsl2563_write(chip->client, TSL2563_REG_HIGHHIGH,
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_HIGHHIGH,
(chip->high_thres >> 8) & 0xFF);
if (ret)
goto error_ret;
- ret = tsl2563_write(chip->client, TSL2563_REG_LOWLOW,
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_LOWLOW,
chip->low_thres & 0xFF);
if (ret)
goto error_ret;
- ret = tsl2563_write(chip->client, TSL2563_REG_LOWHIGH,
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_LOWHIGH,
(chip->low_thres >> 8) & 0xFF);
/* Interrupt register is automatically written anyway if it is relevant
so is not here */
@@ -242,8 +223,8 @@ static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id)
struct i2c_client *client = chip->client;
int ret;
- ret = tsl2563_read(client, TSL2563_REG_ID, id, sizeof(*id));
- if (ret != sizeof(*id))
+ ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_ID);
+ if (ret < 0)
return ret;
return 0;
@@ -313,8 +294,9 @@ static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc)
(adc > chip->gainlevel->max) ?
chip->gainlevel++ : chip->gainlevel--;
- tsl2563_write(client, TSL2563_REG_TIMING,
- chip->gainlevel->gaintime);
+ i2c_smbus_write_byte_data(client,
+ TSL2563_CMD | TSL2563_REG_TIMING,
+ chip->gainlevel->gaintime);
tsl2563_wait_adc(chip);
tsl2563_wait_adc(chip);
@@ -327,7 +309,6 @@ static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc)
static int tsl2563_get_adc(struct tsl2563_chip *chip)
{
struct i2c_client *client = chip->client;
- u8 buf0[2], buf1[2];
u16 adc0, adc1;
int retry = 1;
int ret = 0;
@@ -350,19 +331,17 @@ static int tsl2563_get_adc(struct tsl2563_chip *chip)
}
while (retry) {
- ret = tsl2563_read(client,
- TSL2563_REG_DATA0LOW,
- buf0, sizeof(buf0));
- if (ret != sizeof(buf0))
+ ret = i2c_smbus_read_word_data(client,
+ TSL2563_CMD | TSL2563_REG_DATA0LOW);
+ if (ret < 0)
goto out;
+ adc0 = ret;
- ret = tsl2563_read(client, TSL2563_REG_DATA1LOW,
- buf1, sizeof(buf1));
- if (ret != sizeof(buf1))
+ ret = i2c_smbus_read_word_data(client,
+ TSL2563_CMD | TSL2563_REG_DATA1LOW);
+ if (ret < 0)
goto out;
-
- adc0 = (buf0[1] << 8) + buf0[0];
- adc1 = (buf1[1] << 8) + buf1[0];
+ adc1 = ret;
retry = tsl2563_adjust_gainlevel(chip, adc0);
}
@@ -592,11 +571,13 @@ static ssize_t tsl2563_write_thresh(struct iio_dev *indio_dev,
else
address = TSL2563_REG_LOWLOW;
mutex_lock(&chip->lock);
- ret = tsl2563_write(chip->client, address, val & 0xFF);
+ ret = i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | address,
+ val & 0xFF);
if (ret)
goto error_ret;
- ret = tsl2563_write(chip->client, address + 1,
- (val >> 8) & 0xFF);
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2563_CMD | (address + 1),
+ (val >> 8) & 0xFF);
if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_RISING)
chip->high_thres = val;
else
@@ -612,7 +593,6 @@ static irqreturn_t tsl2563_event_handler(int irq, void *private)
{
struct iio_dev *dev_info = private;
struct tsl2563_chip *chip = iio_priv(dev_info);
- u8 cmd = TSL2563_CMD | TSL2563_CLEARINT;
iio_push_event(dev_info, 0,
IIO_UNMOD_EVENT_CODE(IIO_EV_CLASS_LIGHT,
@@ -622,7 +602,7 @@ static irqreturn_t tsl2563_event_handler(int irq, void *private)
iio_get_time_ns());
/* clear the interrupt and push the event */
- i2c_master_send(chip->client, &cmd, sizeof(cmd));
+ i2c_smbus_write_byte(chip->client, TSL2563_CMD | TSL2563_CLEARINT);
return IRQ_HANDLED;
}
@@ -647,13 +627,17 @@ static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev,
if (ret)
goto out;
}
- ret = tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_INT,
+ chip->intr);
chip->int_enabled = true;
}
if (!state && (chip->intr & 0x30)) {
chip->intr |= ~0x30;
- ret = tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_INT,
+ chip->intr);
chip->int_enabled = false;
/* now the interrupt is not enabled, we can go to sleep */
schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
@@ -668,16 +652,15 @@ static int tsl2563_read_interrupt_config(struct iio_dev *indio_dev,
int event_code)
{
struct tsl2563_chip *chip = iio_priv(indio_dev);
- u8 rxbuf;
int ret;
mutex_lock(&chip->lock);
- ret = tsl2563_read(chip->client, TSL2563_REG_INT,
- &rxbuf, sizeof(rxbuf));
+ ret = i2c_smbus_read_byte_data(chip->client,
+ TSL2563_CMD | TSL2563_REG_INT);
mutex_unlock(&chip->lock);
if (ret < 0)
goto error_ret;
- ret = !!(rxbuf & 0x30);
+ ret = !!(ret & 0x30);
error_ret:
return ret;
@@ -797,7 +780,8 @@ static int tsl2563_remove(struct i2c_client *client)
cancel_delayed_work(&chip->poweroff_work);
/* Ensure that interrupts are disabled - then flush any bottom halves */
chip->intr |= ~0x30;
- tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
+ i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | TSL2563_REG_INT,
+ chip->intr);
flush_scheduled_work();
tsl2563_set_power(chip, 0);
if (client->irq)
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists