| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201106292259.32063.a.miskiewicz@gmail.com> Date: Wed, 29 Jun 2011 22:59:31 +0200 From: Arkadiusz Miskiewicz <a.miskiewicz@...il.com> To: Alan Stern <stern@...land.harvard.edu> Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org Subject: Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram On Wednesday 29 of June 2011, Alan Stern wrote: > On Wed, 29 Jun 2011, Arkadiusz Miskiewicz wrote: > > Hi, > > > > Something broke between rc3 and rc5. Thinkpad t400, logitech usb mouse. > > After resume from ram usb device no longer works. Somewhere around rc3 it > > was working fine. > > Obviously you can try bisection to find the problem. But if you don't > want to go through that, you could post the dmesg from a kernel that > has CONFIG_USB_DEBUG enabled. CONFIG_USB_DEBUG will be faster but I'll bisect if no one figures out what's wrong. Note that I tried to unplug & plugin usb mouse after all this dmesg but nothing new appeared in dmesg - kernel didn't notice that I did that. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-rc5-00063-g0d72c6f (arekm@...on-pld) (gcc version 4.6.1 20110627 (release) (PLD-Linux) ) #7 SMP PREEMPT Wed Jun 29 22:51:36 CEST 2011 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0 root=/dev/mapper/lrootfs ro resume=/dev/sda2 panic=60 reboot=acpi [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd4a1000 (usable) [ 0.000000] BIOS-e820: 00000000bd4a1000 - 00000000bd4a7000 (reserved) [ 0.000000] BIOS-e820: 00000000bd4a7000 - 00000000bd5b7000 (usable) [ 0.000000] BIOS-e820: 00000000bd5b7000 - 00000000bd60f000 (reserved) [ 0.000000] BIOS-e820: 00000000bd60f000 - 00000000bd6c6000 (usable) [ 0.000000] BIOS-e820: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bd6d4000 - 00000000bd6d8000 (reserved) [ 0.000000] BIOS-e820: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd6dc000 - 00000000bd6df000 (reserved) [ 0.000000] BIOS-e820: 00000000bd6df000 - 00000000bd706000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd706000 - 00000000bd708000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bd708000 - 00000000bd90f000 (reserved) [ 0.000000] BIOS-e820: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd99f000 - 00000000bd9ff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bd9ff000 - 00000000bda00000 (usable) [ 0.000000] BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: LENOVO 2764CTO/2764CTO, BIOS 7UET91WW (3.21 ) 12/06/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 13C000000 mask FFC000000 uncachable [ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FC0000000 write-back [ 0.000000] 4 base 100000000 mask FC0000000 write-back [ 0.000000] 5 base 0BDE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bde00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbda00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f6480] f6480 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bda00000 [ 0.000000] 0000000000 - 00bda00000 page 2M [ 0.000000] kernel direct mapping tables up to bda00000 @ bd6c2000-bd6c6000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000 [ 0.000000] 0100000000 - 013c000000 page 2M [ 0.000000] kernel direct mapping tables up to 13c000000 @ 13bffa000-13c000000 [ 0.000000] RAMDISK: 37eb0000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f6440 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bd949b5a 0009C (v01 LENOVO TP-7U 00003210 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bd949d00 000F4 (v03 LENOVO TP-7U 00003210 LNVO 00000001) [ 0.000000] ACPI: DSDT 00000000bd94a10e 0FAE1 (v01 LENOVO TP-7U 00003210 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bd98e000 00040 [ 0.000000] ACPI: SSDT 00000000bd949eb4 0025A (v01 LENOVO TP-7U 00003210 MSFT 03000000) [ 0.000000] ACPI: ECDT 00000000bd959bef 00052 (v01 LENOVO TP-7U 00003210 LNVO 00000001) [ 0.000000] ACPI: APIC 00000000bd959c41 00078 (v01 LENOVO TP-7U 00003210 LNVO 00000001) [ 0.000000] ACPI: MCFG 00000000bd959cb9 0003C (v01 LENOVO TP-7U 00003210 LNVO 00000001) [ 0.000000] ACPI: HPET 00000000bd959cf5 00038 (v01 LENOVO TP-7U 00003210 LNVO 00000001) [ 0.000000] ACPI: SLIC 00000000bd959dc2 00176 (v01 LENOVO TP-7U 00003210 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bd959f38 00028 (v01 LENOVO TP-7U 00003210 LTP 00000001) [ 0.000000] ACPI: ASF! 00000000bd959f60 000A0 (v16 LENOVO TP-7U 00003210 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000bd98d1fa 00568 (v01 LENOVO TP-7U 00003210 INTL 20050513) [ 0.000000] ACPI: TCPA 00000000bd707000 00032 (v00 00000000 00000000) [ 0.000000] ACPI: DMAR 00000000bd706000 00120 (v01 ? 00000001 00000000) [ 0.000000] ACPI: SSDT 00000000bd6d3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bd6d2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bd6d1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T400 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000013c000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000013c000000 [ 0.000000] NODE_DATA [000000013bffb000 - 000000013bffffff] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880137600000- ffff88013adfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bd4a1 [ 0.000000] 0: 0x000bd4a7 -> 0x000bd5b7 [ 0.000000] 0: 0x000bd60f -> 0x000bd6c6 [ 0.000000] 0: 0x000bd9ff -> 0x000bda00 [ 0.000000] 0: 0x00100000 -> 0x0013c000 [ 0.000000] On node 0 totalpages: 1021431 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 757409 pages, LIFO batch:31 [ 0.000000] Normal zone: 3360 pages used for memmap [ 0.000000] Normal zone: 242400 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] 4 Processors exceeds NR_CPUS limit of 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bd4a1000 - 00000000bd4a7000 [ 0.000000] PM: Registered nosave memory: 00000000bd5b7000 - 00000000bd60f000 [ 0.000000] PM: Registered nosave memory: 00000000bd6c6000 - 00000000bd6d1000 [ 0.000000] PM: Registered nosave memory: 00000000bd6d1000 - 00000000bd6d4000 [ 0.000000] PM: Registered nosave memory: 00000000bd6d4000 - 00000000bd6d8000 [ 0.000000] PM: Registered nosave memory: 00000000bd6d8000 - 00000000bd6dc000 [ 0.000000] PM: Registered nosave memory: 00000000bd6dc000 - 00000000bd6df000 [ 0.000000] PM: Registered nosave memory: 00000000bd6df000 - 00000000bd706000 [ 0.000000] PM: Registered nosave memory: 00000000bd706000 - 00000000bd708000 [ 0.000000] PM: Registered nosave memory: 00000000bd708000 - 00000000bd90f000 [ 0.000000] PM: Registered nosave memory: 00000000bd90f000 - 00000000bd99f000 [ 0.000000] PM: Registered nosave memory: 00000000bd99f000 - 00000000bd9ff000 [ 0.000000] PM: Registered nosave memory: 00000000bda00000 - 00000000bdc00000 [ 0.000000] PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88013bc00000 s69760 r8192 d24448 u1048576 [ 0.000000] pcpu-alloc: s69760 r8192 d24448 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003730 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0 root=/dev/mapper/lrootfs ro resume=/dev/sda2 panic=60 reboot=acpi [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3950216k/5177344k available (4134k kernel code, 1091620k absent, 135508k reserved, 4577k data, 568k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:320 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2527.349 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.69 BogoMIPS (lpj=10109396) [ 0.004118] pid_max: default: 32768 minimum: 301 [ 0.004202] Security Framework initialized [ 0.008117] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010257] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011269] Mount-cache hash table entries: 256 [ 0.011491] Initializing cgroup subsys cpuacct [ 0.011553] Initializing cgroup subsys memory [ 0.011616] Initializing cgroup subsys devices [ 0.011672] Initializing cgroup subsys freezer [ 0.011727] Initializing cgroup subsys perf_event [ 0.011811] Disabled fast string operations [ 0.011868] CPU: Physical Processor ID: 0 [ 0.011922] CPU: Processor Core ID: 0 [ 0.011976] mce: CPU supports 6 MCE banks [ 0.012015] CPU0: Thermal monitoring enabled (TM2) [ 0.012073] using mwait in idle threads. [ 0.012146] ACPI: Core revision 20110413 [ 0.020415] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062716] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 [ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.068003] ... version: 2 [ 0.068003] ... bit width: 40 [ 0.068003] ... generic registers: 2 [ 0.068003] ... value mask: 000000ffffffffff [ 0.068003] ... max period: 000000007fffffff [ 0.068003] ... fixed-purpose events: 3 [ 0.068003] ... event mask: 0000000700000003 [ 0.092019] Booting Node 0, Processors #1 Ok. [ 0.092117] smpboot cpu 1: start_ip = 99000 [ 0.008000] Disabled fast string operations [ 0.184027] Brought up 2 CPUs [ 0.184139] Total of 2 processors activated (10108.65 BogoMIPS). [ 0.185759] devtmpfs: initialized [ 0.185759] PM: Registering ACPI NVS region at bd6c6000 (45056 bytes) [ 0.185759] PM: Registering ACPI NVS region at bd6d8000 (16384 bytes) [ 0.185759] PM: Registering ACPI NVS region at bd6df000 (159744 bytes) [ 0.185759] PM: Registering ACPI NVS region at bd90f000 (589824 bytes) [ 0.185759] print_constraints: dummy: [ 0.185759] NET: Registered protocol family 16 [ 0.185759] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.185759] ACPI: bus type pci registered [ 0.185759] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.185759] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.197214] PCI: Using configuration type 1 for base access [ 0.197299] bio: create slab <bio-0> at 0 [ 0.197299] ACPI: Added _OSI(Linux) [ 0.201700] ACPI: EC: EC description table is found, configuring boot EC [ 0.207994] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.225327] ACPI: SSDT 00000000bd6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.225880] ACPI: Dynamic OEM Table Load: [ 0.226017] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.226305] ACPI: SSDT 00000000bd6d4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.226887] ACPI: Dynamic OEM Table Load: [ 0.227023] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.252260] ACPI: SSDT 00000000bd6d5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.252827] ACPI: Dynamic OEM Table Load: [ 0.252963] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.264066] ACPI: SSDT 00000000bd6d5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.264616] ACPI: Dynamic OEM Table Load: [ 0.264753] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.284148] ACPI: Interpreter enabled [ 0.284205] ACPI: (supports S0 S3 S4 S5) [ 0.284436] ACPI: Using IOAPIC for interrupt routing [ 0.296091] ACPI: Power Resource [PUBS] (on) [ 0.304158] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.308346] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.308386] HEST: Table not found. [ 0.308442] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.308735] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.308827] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.308827] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.308827] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.308827] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 0.308827] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.308827] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.308827] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] [ 0.308827] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600 [ 0.308827] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300 [ 0.308827] pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf47fffff 64bit] [ 0.308827] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.308827] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.308827] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380 [ 0.308827] pci 0000:00:02.1: reg 10: [mem 0xf4200000-0xf42fffff 64bit] [ 0.308827] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780 [ 0.308827] pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit] [ 0.308827] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.308827] pci 0000:00:03.0: PME# disabled [ 0.308827] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200 [ 0.308827] pci 0000:00:19.0: reg 10: [mem 0xfc000000-0xfc01ffff] [ 0.308832] pci 0000:00:19.0: reg 14: [mem 0xfc025000-0xfc025fff] [ 0.308843] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] [ 0.308910] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.308914] pci 0000:00:19.0: PME# disabled [ 0.308938] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.308993] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] [ 0.309049] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.309103] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] [ 0.309160] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.309215] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf] [ 0.309282] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.309306] pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff] [ 0.309393] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.309398] pci 0000:00:1a.7: PME# disabled [ 0.309428] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 0.309448] pci 0000:00:1b.0: reg 10: [mem 0xfc020000-0xfc023fff 64bit] [ 0.309523] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.309528] pci 0000:00:1b.0: PME# disabled [ 0.309556] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.309634] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.309638] pci 0000:00:1c.0: PME# disabled [ 0.309667] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604 [ 0.309745] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.309749] pci 0000:00:1c.1: PME# disabled [ 0.309779] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 [ 0.309857] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.309861] pci 0000:00:1c.3: PME# disabled [ 0.309890] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604 [ 0.309968] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.309973] pci 0000:00:1c.4: PME# disabled [ 0.310006] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.310061] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df] [ 0.310117] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.310172] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff] [ 0.310229] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.312073] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f] [ 0.312142] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.312166] pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff] [ 0.312253] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.312259] pci 0000:00:1d.7: PME# disabled [ 0.312285] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.312364] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601 [ 0.312515] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106 [ 0.312542] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f] [ 0.312553] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f] [ 0.312564] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47] [ 0.312575] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b] [ 0.312585] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] [ 0.312596] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff] [ 0.312645] pci 0000:00:1f.2: PME# supported from D3hot [ 0.312649] pci 0000:00:1f.2: PME# disabled [ 0.312672] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.312693] pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit] [ 0.312722] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] [ 0.312811] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.312872] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.312876] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.312884] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.313001] pci 0000:03:00.0: [8086:423b] type 0 class 0x000280 [ 0.313044] pci 0000:03:00.0: reg 10: [mem 0xf4300000-0xf4301fff 64bit] [ 0.313206] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.313217] pci 0000:03:00.0: PME# disabled [ 0.313280] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.313341] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.313345] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff] [ 0.313352] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.313408] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.313469] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.313473] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.313480] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.313536] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.313596] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.313601] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] [ 0.313608] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.313653] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607 [ 0.313677] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function) [ 0.313748] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller [ 0.313835] pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff] [ 0.313862] pci 0000:15:00.0: supports D1 D2 [ 0.313864] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.313870] pci 0000:15:00.0: PME# disabled [ 0.313894] pci 0000:15:00.1: [1180:0832] type 0 class 0x000c00 [ 0.313919] pci 0000:15:00.1: reg 10: [mem 0xf4801000-0xf48017ff] [ 0.314019] pci 0000:15:00.1: supports D1 D2 [ 0.314021] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314026] pci 0000:15:00.1: PME# disabled [ 0.314051] pci 0000:15:00.2: [1180:0822] type 0 class 0x000805 [ 0.314075] pci 0000:15:00.2: reg 10: [mem 0xf4801800-0xf48018ff] [ 0.314175] pci 0000:15:00.2: supports D1 D2 [ 0.314177] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314182] pci 0000:15:00.2: PME# disabled [ 0.314210] pci 0000:15:00.4: [1180:0592] type 0 class 0x000880 [ 0.314235] pci 0000:15:00.4: reg 10: [mem 0xf4802000-0xf48020ff] [ 0.314334] pci 0000:15:00.4: supports D1 D2 [ 0.314336] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314341] pci 0000:15:00.4: PME# disabled [ 0.314366] pci 0000:15:00.5: [1180:0852] type 0 class 0x000880 [ 0.314391] pci 0000:15:00.5: reg 10: [mem 0xf4802400-0xf48024ff] [ 0.314490] pci 0000:15:00.5: supports D1 D2 [ 0.314492] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.314497] pci 0000:15:00.5: PME# disabled [ 0.314568] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.314631] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff] [ 0.314636] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] [ 0.314643] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.314645] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.314648] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.314650] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.314652] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.314655] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.314657] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.314659] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.314740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.314850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.314881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.314912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.314944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.314975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.315230] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.315636] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.320095] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.320602] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.321119] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.321636] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.322154] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.322671] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.323193] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.324372] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.324863] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.324863] vgaarb: loaded [ 0.324863] vgaarb: bridge control possible 0000:00:02.0 [ 0.324863] PCI: Using ACPI for IRQ routing [ 0.326357] PCI: pci_cache_line_size set to 64 bytes [ 0.326474] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 0.326476] reserve RAM buffer: 00000000bd4a1000 - 00000000bfffffff [ 0.326480] reserve RAM buffer: 00000000bd5b7000 - 00000000bfffffff [ 0.326484] reserve RAM buffer: 00000000bd6c6000 - 00000000bfffffff [ 0.326488] reserve RAM buffer: 00000000bda00000 - 00000000bfffffff [ 0.328033] NetLabel: Initializing [ 0.328088] NetLabel: domain hash size = 128 [ 0.328144] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.328210] NetLabel: unlabeled traffic allowed by default [ 0.328273] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.328337] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.328595] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.336086] Switching to clocksource hpet [ 0.337506] pnp: PnP ACPI init [ 0.337515] ACPI: bus type pnp registered [ 0.357722] Switched to NOHz mode on CPU #1 [ 0.357723] Switched to NOHz mode on CPU #0 [ 0.357821] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.357823] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.357824] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.357826] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.357827] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.357829] pnp 00:00: [mem 0x000d0000-0x000cffff disabled] [ 0.357831] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] [ 0.357832] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] [ 0.357834] pnp 00:00: [mem 0x000dc000-0x000dffff] [ 0.357836] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.357838] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.357840] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.357842] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.357844] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.357846] pnp 00:00: [mem 0x00100000-0xbfffffff] [ 0.357848] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 0.357849] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 0.357934] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.357995] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.358056] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.358116] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.358176] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.358237] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.358297] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.358358] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.358418] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.358479] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.358539] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.358600] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.358660] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.358721] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.358782] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.358800] pnp 00:01: [bus 00-ff] [ 0.358802] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.358804] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.358806] pnp 00:01: [io 0x0d00-0xffff window] [ 0.358808] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.358810] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.358812] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.358814] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.358816] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.358818] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.358820] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.358822] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.358824] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.358826] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.358828] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.358830] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.358833] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.358835] pnp 00:01: [mem 0xc0000000-0xfebfffff window] [ 0.358837] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] [ 0.358909] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.378800] pnp 00:02: [io 0x0010-0x001f] [ 0.378802] pnp 00:02: [io 0x0090-0x009f] [ 0.378804] pnp 00:02: [io 0x0024-0x0025] [ 0.378805] pnp 00:02: [io 0x0028-0x0029] [ 0.378807] pnp 00:02: [io 0x002c-0x002d] [ 0.378809] pnp 00:02: [io 0x0030-0x0031] [ 0.378810] pnp 00:02: [io 0x0034-0x0035] [ 0.378812] pnp 00:02: [io 0x0038-0x0039] [ 0.378813] pnp 00:02: [io 0x003c-0x003d] [ 0.378815] pnp 00:02: [io 0x00a4-0x00a5] [ 0.378816] pnp 00:02: [io 0x00a8-0x00a9] [ 0.378818] pnp 00:02: [io 0x00ac-0x00ad] [ 0.378820] pnp 00:02: [io 0x00b0-0x00b5] [ 0.378821] pnp 00:02: [io 0x00b8-0x00b9] [ 0.378823] pnp 00:02: [io 0x00bc-0x00bd] [ 0.378824] pnp 00:02: [io 0x0050-0x0053] [ 0.378826] pnp 00:02: [io 0x0072-0x0077] [ 0.378827] pnp 00:02: [io 0x002e-0x002f] [ 0.378829] pnp 00:02: [io 0x1000-0x107f] [ 0.378831] pnp 00:02: [io 0x1180-0x11ff] [ 0.378832] pnp 00:02: [io 0x0800-0x080f] [ 0.378834] pnp 00:02: [io 0x15e0-0x15ef] [ 0.378835] pnp 00:02: [io 0x1600-0x167f] [ 0.378837] pnp 00:02: [io 0x1680-0x169f] [ 0.378839] pnp 00:02: [mem 0xe0000000-0xefffffff] [ 0.378841] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 0.378842] pnp 00:02: [mem 0xfed10000-0xfed13fff] [ 0.378844] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 0.378846] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 0.378848] pnp 00:02: [mem 0xfed45000-0xfed4bfff] [ 0.378944] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.379004] system 00:02: [io 0x1180-0x11ff] has been reserved [ 0.379065] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.379124] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.379183] system 00:02: [io 0x1600-0x167f] has been reserved [ 0.379242] system 00:02: [io 0x1680-0x169f] has been reserved [ 0.379302] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 0.379362] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.379422] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.379483] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.379543] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.379603] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.379663] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.379699] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.379751] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.379761] pnp 00:04: [io 0x0000-0x000f] [ 0.379763] pnp 00:04: [io 0x0080-0x008f] [ 0.379765] pnp 00:04: [io 0x00c0-0x00df] [ 0.379766] pnp 00:04: [dma 4] [ 0.379817] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.379826] pnp 00:05: [io 0x0061] [ 0.379876] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.379885] pnp 00:06: [io 0x00f0] [ 0.379892] pnp 00:06: [irq 13] [ 0.379942] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.379951] pnp 00:07: [io 0x0070-0x0071] [ 0.379959] pnp 00:07: [irq 8] [ 0.380031] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.380041] pnp 00:08: [io 0x0060] [ 0.380042] pnp 00:08: [io 0x0064] [ 0.380047] pnp 00:08: [irq 1] [ 0.380098] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.380110] pnp 00:09: [irq 12] [ 0.380162] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active) [ 0.400086] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 0.400157] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.400645] pnp: PnP ACPI: found 11 devices [ 0.400701] ACPI: ACPI bus type pnp unregistered [ 0.409092] PCI: max bus depth: 2 pci_try_num: 3 [ 0.409145] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.409218] pci 0000:00:1c.1: BAR 13: assigned [io 0x8000-0x8fff] [ 0.409279] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0200000-0xc03fffff] [ 0.409341] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.409413] pci 0000:00:1c.0: BAR 13: assigned [io 0x9000-0x9fff] [ 0.409473] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.409532] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.409595] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff] [ 0.409658] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.409734] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.409793] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] [ 0.409855] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff] [ 0.409918] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.409994] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.410053] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.410115] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.410178] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.410254] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.410313] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.410376] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] [ 0.410438] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.410515] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref] [ 0.410588] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff] [ 0.410648] pci 0000:15:00.0: BAR 13: assigned [io 0x4000-0x40ff] [ 0.410708] pci 0000:15:00.0: BAR 14: assigned [io 0x4400-0x44ff] [ 0.410767] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.410825] pci 0000:15:00.0: bridge window [io 0x4000-0x40ff] [ 0.410887] pci 0000:15:00.0: bridge window [io 0x4400-0x44ff] [ 0.410950] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] [ 0.411023] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff] [ 0.411086] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.411145] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff] [ 0.411208] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] [ 0.411271] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.411355] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.413233] pci 0000:00:1c.0: setting latency timer to 64 [ 0.413242] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.413305] pci 0000:00:1c.1: setting latency timer to 64 [ 0.413313] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.413375] pci 0000:00:1c.3: setting latency timer to 64 [ 0.413382] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.413444] pci 0000:00:1c.4: setting latency timer to 64 [ 0.413452] pci 0000:00:1e.0: setting latency timer to 64 [ 0.413461] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.413525] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.413527] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.413529] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.413532] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.413534] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.413536] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.413538] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff] [ 0.413540] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.413542] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc03fffff] [ 0.413544] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.413547] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] [ 0.413549] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff] [ 0.413551] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.413553] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 0.413555] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.413557] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.413560] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.413562] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff] [ 0.413564] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.413566] pci_bus 0000:15: resource 0 [io 0x4000-0x7fff] [ 0.413568] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff] [ 0.413570] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.413572] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7] [ 0.413574] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff] [ 0.413576] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff] [ 0.413579] pci_bus 0000:15: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.413581] pci_bus 0000:15: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.413583] pci_bus 0000:15: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.413585] pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff] [ 0.413587] pci_bus 0000:16: resource 0 [io 0x4000-0x40ff] [ 0.413589] pci_bus 0000:16: resource 1 [io 0x4400-0x44ff] [ 0.413591] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref] [ 0.413593] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff] [ 0.413627] NET: Registered protocol family 2 [ 0.413805] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.415073] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.418309] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.418833] TCP: Hash tables configured (established 524288 bind 65536) [ 0.418893] TCP reno registered [ 0.418955] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.419049] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.419266] NET: Registered protocol family 1 [ 0.419340] pci 0000:00:02.0: Boot video device [ 0.419355] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.419357] pci 0000:00:1a.0: Performing full reset [ 0.419377] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.419379] pci 0000:00:1a.1: Performing full reset [ 0.419398] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.419400] pci 0000:00:1a.2: Performing full reset [ 0.419464] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.419466] pci 0000:00:1d.0: Performing full reset [ 0.419485] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.419487] pci 0000:00:1d.1: Performing full reset [ 0.419507] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 0.419508] pci 0000:00:1d.2: Performing full reset [ 0.419578] PCI: CLS 64 bytes, default 64 [ 0.419630] Trying to unpack rootfs image as initramfs... [ 0.421827] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.423209] Freeing initrd memory: 1280k freed [ 0.423485] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.423545] Placing 64MB software IO TLB between ffff8800b94a1000 - ffff8800bd4a1000 [ 0.423616] software IO TLB at phys 0xb94a1000 - 0xbd4a1000 [ 0.423688] Simple Boot Flag at 0x35 set to 0x1 [ 0.424657] audit: initializing netlink socket (disabled) [ 0.424724] type=2000 audit(1309380898.420:1): initialized [ 0.435638] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.458418] VFS: Disk quotas dquot_6.5.2 [ 0.458570] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.458737] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.458853] msgmni has been set to 7717 [ 0.459249] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.459321] io scheduler noop registered [ 0.459377] io scheduler deadline registered (default) [ 0.459575] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.459626] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.459822] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.459870] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.460109] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.460157] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.460349] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.460397] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.460666] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.460730] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.460750] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.460811] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.460873] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.460893] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.460956] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.460976] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.461038] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 0.461162] intel_idle: MWAIT substates: 0x3122220 [ 0.461164] intel_idle: does not run on family 6 model 23 [ 0.461246] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.461495] ACPI: Lid Switch [LID] [ 0.461622] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.461696] ACPI: Sleep Button [SLPB] [ 0.461839] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.461910] ACPI: Power Button [PWRF] [ 0.462010] ERST: Table is not found! [ 0.492976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.592429] Linux agpgart interface v0.103 [ 0.592635] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.592819] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.594593] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.594859] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.595032] [drm] Initialized drm 1.1.0 20060810 [ 0.595133] [drm] radeon defaulting to userspace modesetting. [ 0.596266] i915 0000:00:02.0: power state changed by ACPI to D0 [ 0.596327] i915 0000:00:02.0: power state changed by ACPI to D0 [ 0.596390] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.596452] i915 0000:00:02.0: setting latency timer to 64 [ 0.654698] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 0.654703] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.654765] [drm] Driver supports precise vblank timestamp query. [ 0.654867] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.010422] fbcon: inteldrmfb (fb0) is primary device [ 1.060795] Console: switching to colour frame buffer device 180x56 [ 1.064470] fb0: inteldrmfb frame buffer device [ 1.064494] drm: registered panic notifier [ 1.165732] acpi device:02: registered as cooling_device0 [ 1.165881] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.165932] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.166037] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.168150] brd: module loaded [ 1.168280] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.177442] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.177496] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.177725] mousedev: PS/2 mouse device common for all mice [ 1.177820] rtc_cmos 00:07: RTC can wake from S4 [ 1.177982] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.178042] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.178120] cpuidle: using governor ladder [ 1.178144] cpuidle: using governor menu [ 1.178379] TCP cubic registered [ 1.178400] NET: Registered protocol family 17 [ 1.182844] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.189106] registered taskstats version 1 [ 1.199162] rtc_cmos 00:07: setting system clock to 2011-06-29 20:55:00 UTC (1309380900) [ 1.199366] RAMDISK: lzo image found at block 0 [ 1.214960] VFS: Mounted root (romfs filesystem) readonly on device 1:0. [ 1.220628] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@...hat.com [ 1.223237] Intel AES-NI instructions are not detected. [ 1.236585] SCSI subsystem initialized [ 1.240970] libata version 3.00 loaded. [ 1.242087] ahci 0000:00:1f.2: version 3.0 [ 1.242103] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.243578] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.243619] ahci: SSS flag set, parallel bus scan disabled [ 1.245070] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.246519] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs [ 1.247960] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.248790] scsi0 : ahci [ 1.250343] scsi1 : ahci [ 1.251858] scsi2 : ahci [ 1.253378] scsi3 : ahci [ 1.255065] ata1: SATA max UDMA/133 abar m2048@...c226000 port 0xfc226100 irq 45 [ 1.256477] ata2: SATA max UDMA/133 abar m2048@...c226000 port 0xfc226180 irq 45 [ 1.257835] ata3: DUMMY [ 1.259178] ata4: DUMMY [ 1.420017] Refined TSC clocksource calibration: 2526.999 MHz. [ 1.421384] Switching to clocksource tsc [ 1.580018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.592090] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.592093] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.593474] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.601143] ata1.00: ATA-8: OCZ-VERTEX2, 1.32, max UDMA/133 [ 1.602510] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.611142] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.611145] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.612532] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.621144] ata1.00: configured for UDMA/133 [ 1.622624] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.32 PQ: 0 ANSI: 5 [ 1.944016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.947876] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.948966] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.948970] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.951435] ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.D0, max UDMA/100 [ 1.955830] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 1.956911] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 1.956914] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.959377] ata2.00: configured for UDMA/100 [ 1.963094] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.D0 PQ: 0 ANSI: 5 [ 1.965748] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.967669] sd 0:0:0:0: [sda] Write Protect is off [ 1.969094] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.969113] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.971224] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 1.973151] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.993735] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 1.995833] SGI XFS Quota Management subsystem [ 6.460357] XFS (dm-0): Mounting Filesystem [ 6.512395] XFS (dm-0): Ending clean mount [ 6.513899] VFS: Mounted root (xfs filesystem) readonly on device 254:0. [ 6.515390] Trying to move old root to /initrd ... okay [ 6.517489] devtmpfs: mounted [ 6.519899] Freeing unused kernel memory: 568k freed [ 6.521553] Write protecting the kernel read-only data: 8192k [ 6.529276] Freeing unused kernel memory: 1988k freed [ 6.532266] Freeing unused kernel memory: 280k freed [ 6.849859] usbcore: registered new interface driver usbfs [ 6.849907] usbcore: registered new interface driver hub [ 6.855001] usbcore: registered new device driver usb [ 6.855060] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 [ 6.855062] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 6.855093] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 6.855107] e1000e 0000:00:19.0: setting latency timer to 64 [ 6.855245] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 6.857658] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.857661] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 6.861648] iTCO_vendor_support: vendor-support=0 [ 6.866049] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 6.866153] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) [ 6.866307] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.875510] ACPI: acpi_idle registered with cpuidle [ 6.880382] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 6.904369] Monitor-Mwait will be used to enter C-1 state [ 6.905914] Monitor-Mwait will be used to enter C-2 state [ 6.907374] Monitor-Mwait will be used to enter C-3 state [ 6.907442] Marking TSC unstable due to TSC halts in idle [ 6.908281] Switching to clocksource hpet [ 6.919126] cfg80211: Calling CRDA to update world regulatory domain [ 6.923014] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] [ 6.927809] thermal LNXTHERM:00: registered as thermal_zone0 [ 6.927812] ACPI: Thermal Zone [THM0] (50 C) [ 6.941581] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in- tree:d [ 6.941584] iwlagn: Copyright(c) 2003-2011 Intel Corporation [ 6.941947] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.941957] iwlagn 0000:03:00.0: setting latency timer to 64 [ 6.941988] iwlagn 0000:03:00.0: Detected Intel(R) WiMAX/WiFi Link 5350 AGN, REV=0x24 [ 6.944413] wmi: Mapper loaded [ 6.945243] thermal LNXTHERM:01: registered as thermal_zone1 [ 6.945245] ACPI: Thermal Zone [THM1] (47 C) [ 6.962046] Non-volatile memory driver v1.3 [ 6.973815] ACPI: Battery Slot [BAT0] (battery present) [ 6.974378] ACPI: AC Adapter [AC] (on-line) [ 6.979003] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.003532] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.003536] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.003651] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.027002] iwlagn 0000:03:00.0: device EEPROM VER=0x21e, CALIB=0x4 [ 7.027005] iwlagn 0000:03:00.0: Device SKU: 0Xb [ 7.027007] iwlagn 0000:03:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 [ 7.027019] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 7.027526] iwlagn 0000:03:00.0: irq 47 for MSI/MSI-X [ 7.027759] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 7.027761] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 7.027762] thinkpad_acpi: ThinkPad BIOS 7UET91WW (3.21 ), EC 7VHT16WW-1.06 [ 7.027764] thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO [ 7.048369] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 7.048572] thinkpad_acpi: radio switch found; radios are enabled [ 7.048874] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 7.048878] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 7.048884] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x7fff] [ 7.048887] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4800000-0xf7ffffff] [ 7.048890] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4800000-0xf7ffffff: excluding 0xf4800000-0xf4b7ffff [ 7.048905] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref] [ 7.048907] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff: excluding 0xf0000000-0xf3ffffff [ 7.052372] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 7.059421] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked [ 7.060067] sdhci: Secure Digital Host Controller Interface driver [ 7.060069] sdhci: Copyright(c) Pierre Ossman [ 7.061099] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.062885] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 7.063800] Registered led device: tpacpi::thinklight [ 7.063836] Registered led device: tpacpi::power [ 7.063851] Registered led device: tpacpi::standby [ 7.063867] Registered led device: tpacpi::thinkvantage [ 7.067144] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 7.067223] thinkpad_acpi: Console audio control enabled, mode: override (read/write) [ 7.069428] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 7.072163] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6) [ 7.072166] tpm_tis 00:0a: Intel iTPM workaround enabled [ 7.074678] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:21:86:a2:19:06 [ 7.074681] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 7.074703] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF [ 7.074723] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 7.074727] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 7.074735] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 7.074756] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 7.074760] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 7.074775] drivers/usb/core/inode.c: creating file 'devices' [ 7.074778] drivers/usb/core/inode.c: creating file '001' [ 7.074781] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 7.074792] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 7.074797] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 7.074825] ehci_hcd 0000:00:1a.7: debug port 1 [ 7.074830] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 7.078704] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 7.078706] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 7.078725] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00 [ 7.078729] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 7.082608] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 7.092053] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 7.092098] usb usb1: default language 0x0409 [ 7.092104] usb usb1: udev 1, busnum 1, minor = 0 [ 7.092106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.092108] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.092110] usb usb1: Product: EHCI Host Controller [ 7.092112] usb usb1: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f ehci_hcd [ 7.092114] usb usb1: SerialNumber: 0000:00:1a.7 [ 7.092218] usb usb1: usb_probe_device [ 7.092220] usb usb1: configuration #1 chosen from 1 choice [ 7.092228] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 7.092250] hub 1-0:1.0: usb_probe_interface [ 7.092251] hub 1-0:1.0: usb_probe_interface - got id [ 7.092254] hub 1-0:1.0: USB hub found [ 7.092258] hub 1-0:1.0: 6 ports detected [ 7.092259] hub 1-0:1.0: standalone hub [ 7.092261] hub 1-0:1.0: no power switching (usb 1.0) [ 7.092263] hub 1-0:1.0: individual port over-current protection [ 7.092265] hub 1-0:1.0: power on to power good time: 20ms [ 7.092268] hub 1-0:1.0: local power source is good [ 7.092270] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 7.092319] drivers/usb/core/inode.c: creating file '001' [ 7.092369] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 7.092374] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 7.092386] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 7.092412] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 7.092416] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.092421] drivers/usb/core/inode.c: creating file '002' [ 7.092424] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 7.092433] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 7.092438] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 7.092688] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.092692] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 7.096858] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 7.096860] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 7.096877] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000 [ 7.096882] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 7.100766] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 7.112019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 7.112039] usb usb2: default language 0x0409 [ 7.112045] usb usb2: udev 1, busnum 2, minor = 128 [ 7.112047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.112049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.112051] usb usb2: Product: EHCI Host Controller [ 7.112053] usb usb2: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f ehci_hcd [ 7.112055] usb usb2: SerialNumber: 0000:00:1d.7 [ 7.112136] usb usb2: usb_probe_device [ 7.112138] usb usb2: configuration #1 chosen from 1 choice [ 7.112145] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 7.112171] hub 2-0:1.0: usb_probe_interface [ 7.112172] hub 2-0:1.0: usb_probe_interface - got id [ 7.112176] hub 2-0:1.0: USB hub found [ 7.112180] hub 2-0:1.0: 6 ports detected [ 7.112182] hub 2-0:1.0: standalone hub [ 7.112183] hub 2-0:1.0: no power switching (usb 1.0) [ 7.112185] hub 2-0:1.0: individual port over-current protection [ 7.112187] hub 2-0:1.0: power on to power good time: 20ms [ 7.112190] hub 2-0:1.0: local power source is good [ 7.112192] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 7.112241] drivers/usb/core/inode.c: creating file '001' [ 7.112423] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 7.112597] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.112651] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 7.112679] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.124311] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 7.124499] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) [ 7.124514] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.125533] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 7.125552] mmc0: no vmmc regulator found [ 7.126580] Registered led device: mmc0:: [ 7.127621] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 7.139381] Monitor-Mwait will be used to enter C-3 state [ 7.189149] ALSA sound/pci/hda/hda_codec.c:3771 hda_codec: model 'laptop' is selected [ 7.189214] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 7.192042] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 7.192059] hub 1-0:1.0: port 1: status 0501 change 0001 [ 7.192073] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 7.192076] hub 1-0:1.0: port 4: status 0501 change 0001 [ 7.192086] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT [ 7.192089] hub 1-0:1.0: port 6: status 0501 change 0001 [ 7.202828] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 7.202949] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 7.203012] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 7.212034] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT [ 7.212039] hub 2-0:1.0: port 4: status 0501 change 0001 [ 7.212504] uhci_hcd: USB Universal Host Controller Interface driver [ 7.212557] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 7.212560] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 7.212568] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 7.212576] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 7.212580] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 7.212587] drivers/usb/core/inode.c: creating file '003' [ 7.212592] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 7.212603] uhci_hcd 0000:00:1a.0: detected 2 ports [ 7.212608] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 7.212610] uhci_hcd 0000:00:1a.0: Performing full reset [ 7.212624] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 7.212646] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 7.212684] usb usb3: default language 0x0409 [ 7.212690] usb usb3: udev 1, busnum 3, minor = 256 [ 7.212692] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.212694] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.212696] usb usb3: Product: UHCI Host Controller [ 7.212698] usb usb3: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd [ 7.212700] usb usb3: SerialNumber: 0000:00:1a.0 [ 7.212822] usb usb3: usb_probe_device [ 7.212824] usb usb3: configuration #1 chosen from 1 choice [ 7.212831] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 7.212853] hub 3-0:1.0: usb_probe_interface [ 7.212855] hub 3-0:1.0: usb_probe_interface - got id [ 7.212857] hub 3-0:1.0: USB hub found [ 7.212861] hub 3-0:1.0: 2 ports detected [ 7.212863] hub 3-0:1.0: standalone hub [ 7.212864] hub 3-0:1.0: no power switching (usb 1.0) [ 7.212866] hub 3-0:1.0: individual port over-current protection [ 7.212868] hub 3-0:1.0: power on to power good time: 2ms [ 7.212871] hub 3-0:1.0: local power source is good [ 7.212873] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 7.212911] drivers/usb/core/inode.c: creating file '001' [ 7.212942] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 7.212968] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 7.212974] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 7.212977] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 7.212982] drivers/usb/core/inode.c: creating file '004' [ 7.212985] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 7.212994] uhci_hcd 0000:00:1a.1: detected 2 ports [ 7.212998] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 7.213000] uhci_hcd 0000:00:1a.1: Performing full reset [ 7.213028] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 7.213066] usb usb4: default language 0x0409 [ 7.213071] usb usb4: udev 1, busnum 4, minor = 384 [ 7.213073] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.213075] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.213077] usb usb4: Product: UHCI Host Controller [ 7.213079] usb usb4: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd [ 7.213080] usb usb4: SerialNumber: 0000:00:1a.1 [ 7.213143] usb usb4: usb_probe_device [ 7.213145] usb usb4: configuration #1 chosen from 1 choice [ 7.213151] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 7.250039] hub 4-0:1.0: usb_probe_interface [ 7.250042] hub 4-0:1.0: usb_probe_interface - got id [ 7.250045] hub 4-0:1.0: USB hub found [ 7.250052] hub 4-0:1.0: 2 ports detected [ 7.250054] hub 4-0:1.0: standalone hub [ 7.250055] hub 4-0:1.0: no power switching (usb 1.0) [ 7.250057] hub 4-0:1.0: individual port over-current protection [ 7.250059] hub 4-0:1.0: power on to power good time: 2ms [ 7.250062] hub 4-0:1.0: local power source is good [ 7.250064] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 7.250110] drivers/usb/core/inode.c: creating file '001' [ 7.250147] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 7.250177] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 7.250179] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 7.250192] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 7.250201] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 7.250205] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 7.250212] drivers/usb/core/inode.c: creating file '005' [ 7.250217] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 7.250228] uhci_hcd 0000:00:1a.2: detected 2 ports [ 7.250233] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 7.250235] uhci_hcd 0000:00:1a.2: Performing full reset [ 7.250250] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 7.250271] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 [ 7.250310] usb usb5: default language 0x0409 [ 7.250316] usb usb5: udev 1, busnum 5, minor = 512 [ 7.250318] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.250320] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.250323] usb usb5: Product: UHCI Host Controller [ 7.250324] usb usb5: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd [ 7.250326] usb usb5: SerialNumber: 0000:00:1a.2 [ 7.250452] usb usb5: usb_probe_device [ 7.250455] usb usb5: configuration #1 chosen from 1 choice [ 7.250462] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 7.250482] hub 5-0:1.0: usb_probe_interface [ 7.250483] hub 5-0:1.0: usb_probe_interface - got id [ 7.250485] hub 5-0:1.0: USB hub found [ 7.250489] hub 5-0:1.0: 2 ports detected [ 7.250491] hub 5-0:1.0: standalone hub [ 7.250492] hub 5-0:1.0: no power switching (usb 1.0) [ 7.250494] hub 5-0:1.0: individual port over-current protection [ 7.250495] hub 5-0:1.0: power on to power good time: 2ms [ 7.250499] hub 5-0:1.0: local power source is good [ 7.250501] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 7.250544] drivers/usb/core/inode.c: creating file '001' [ 7.250574] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 7.250594] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 7.250596] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 7.250601] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.250608] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 7.250611] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.250616] drivers/usb/core/inode.c: creating file '006' [ 7.250620] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 7.250629] uhci_hcd 0000:00:1d.0: detected 2 ports [ 7.250633] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 7.250635] uhci_hcd 0000:00:1d.0: Performing full reset [ 7.250650] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 7.250655] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 [ 7.250689] usb usb6: default language 0x0409 [ 7.250695] usb usb6: udev 1, busnum 6, minor = 640 [ 7.250697] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.250699] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.250701] usb usb6: Product: UHCI Host Controller [ 7.250702] usb usb6: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd [ 7.250704] usb usb6: SerialNumber: 0000:00:1d.0 [ 7.250767] usb usb6: usb_probe_device [ 7.250770] usb usb6: configuration #1 chosen from 1 choice [ 7.250775] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 7.250794] hub 6-0:1.0: usb_probe_interface [ 7.250796] hub 6-0:1.0: usb_probe_interface - got id [ 7.250798] hub 6-0:1.0: USB hub found [ 7.250802] hub 6-0:1.0: 2 ports detected [ 7.250803] hub 6-0:1.0: standalone hub [ 7.250805] hub 6-0:1.0: no power switching (usb 1.0) [ 7.250806] hub 6-0:1.0: individual port over-current protection [ 7.250808] hub 6-0:1.0: power on to power good time: 2ms [ 7.255547] hub 6-0:1.0: local power source is good [ 7.255550] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 7.255599] drivers/usb/core/inode.c: creating file '001' [ 7.255640] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 7.255663] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.255672] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 7.255675] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.255680] drivers/usb/core/inode.c: creating file '007' [ 7.255687] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 7.255696] uhci_hcd 0000:00:1d.1: detected 2 ports [ 7.255700] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 7.255702] uhci_hcd 0000:00:1d.1: Performing full reset [ 7.255721] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 [ 7.255757] usb usb7: default language 0x0409 [ 7.255762] usb usb7: udev 1, busnum 7, minor = 768 [ 7.255764] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.255767] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.255769] usb usb7: Product: UHCI Host Controller [ 7.255770] usb usb7: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd [ 7.255772] usb usb7: SerialNumber: 0000:00:1d.1 [ 7.263268] usb usb7: usb_probe_device [ 7.263272] usb usb7: configuration #1 chosen from 1 choice [ 7.263283] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 7.263420] hub 7-0:1.0: usb_probe_interface [ 7.263422] hub 7-0:1.0: usb_probe_interface - got id [ 7.263425] hub 7-0:1.0: USB hub found [ 7.263430] hub 7-0:1.0: 2 ports detected [ 7.263431] hub 7-0:1.0: standalone hub [ 7.263432] hub 7-0:1.0: no power switching (usb 1.0) [ 7.263434] hub 7-0:1.0: individual port over-current protection [ 7.263436] hub 7-0:1.0: power on to power good time: 2ms [ 7.263439] hub 7-0:1.0: local power source is good [ 7.263440] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 7.263500] drivers/usb/core/inode.c: creating file '001' [ 7.263544] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 7.263570] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.263579] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 7.263582] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.263587] drivers/usb/core/inode.c: creating file '008' [ 7.263682] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 7.263691] uhci_hcd 0000:00:1d.2: detected 2 ports [ 7.263696] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 7.263698] uhci_hcd 0000:00:1d.2: Performing full reset [ 7.263722] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 [ 7.263761] usb usb8: default language 0x0409 [ 7.263767] usb usb8: udev 1, busnum 8, minor = 896 [ 7.263769] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.263771] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.263772] usb usb8: Product: UHCI Host Controller [ 7.263774] usb usb8: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd [ 7.263775] usb usb8: SerialNumber: 0000:00:1d.2 [ 7.264388] usb usb8: usb_probe_device [ 7.264390] usb usb8: configuration #1 chosen from 1 choice [ 7.264396] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 7.264442] hub 8-0:1.0: usb_probe_interface [ 7.264444] hub 8-0:1.0: usb_probe_interface - got id [ 7.264446] hub 8-0:1.0: USB hub found [ 7.264449] hub 8-0:1.0: 2 ports detected [ 7.264451] hub 8-0:1.0: standalone hub [ 7.264452] hub 8-0:1.0: no power switching (usb 1.0) [ 7.264453] hub 8-0:1.0: individual port over-current protection [ 7.264455] hub 8-0:1.0: power on to power good time: 2ms [ 7.264458] hub 8-0:1.0: local power source is good [ 7.264459] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 7.264525] drivers/usb/core/inode.c: creating file '001' [ 7.264977] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 7.302029] hub 1-0:1.0: state 7 ports 6 chg 0052 evt 0000 [ 7.302039] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 7.313470] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 7.317291] iwlagn 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 [ 7.317667] Registered led device: phy0-led [ 7.331286] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 7.348148] uhci_hcd 0000:00:1a.1: port 2 portsc 0082,00 [ 7.348170] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00 [ 7.352374] udevd[1440]: renamed network interface wlan0 to eth1 [ 7.356262] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion [ 7.356648] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 7.356674] hub 1-0:1.0: port 1 not reset yet, waiting 50ms [ 7.367725] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00 [ 7.416098] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 7.416131] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 7.472263] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion [ 7.472268] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 7.472272] hub 1-0:1.0: port 4 not reset yet, waiting 50ms [ 7.528056] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 7.528078] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 7.584259] ehci_hcd 0000:00:1a.7: port 6 high speed [ 7.584263] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 7.624176] firewire_core: created device fw0: GUID 00061b032a347baa, S400 [ 7.640056] usb 1-6: new high speed USB device number 4 using ehci_hcd [ 7.696260] ehci_hcd 0000:00:1a.7: port 6 high speed [ 7.696264] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 7.750156] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000 [ 7.750161] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 7.779796] usb 1-6: skipped 1 descriptor after configuration [ 7.779799] usb 1-6: skipped 5 descriptors after interface [ 7.779802] usb 1-6: skipped 1 descriptor after endpoint [ 7.779804] usb 1-6: skipped 9 descriptors after interface [ 7.780168] usb 1-6: default language 0x0409 [ 7.784041] usb 1-6: udev 4, busnum 1, minor = 3 [ 7.784043] usb 1-6: New USB device found, idVendor=17ef, idProduct=1004 [ 7.784045] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 7.784047] usb 1-6: Product: Integrated Camera [ 7.784049] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd. [ 7.784051] usb 1-6: SerialNumber: SN0001 [ 7.784123] usb 1-6: usb_probe_device [ 7.784126] usb 1-6: configuration #1 chosen from 1 choice [ 7.784419] usb 1-6: adding 1-6:1.0 (config #1, interface 0) [ 7.785691] usb 1-6: adding 1-6:1.1 (config #1, interface 1) [ 7.785740] drivers/usb/core/inode.c: creating file '004' [ 7.785758] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000 [ 7.785765] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 7.789822] Linux media interface: v0.10 [ 7.794152] Linux video capture interface: v2.00 [ 7.794856] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 7.797003] uvcvideo 1-6:1.0: usb_probe_interface [ 7.797006] uvcvideo 1-6:1.0: usb_probe_interface - got id [ 7.797028] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004) [ 7.833766] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12 [ 7.833831] usbcore: registered new interface driver uvcvideo [ 7.833833] USB Video Class driver (v1.1.0) [ 7.835196] usb 1-6: link qh4-0001/ffff880133fd5f00 start 1 [1/0 us] [ 7.835235] usb 1-6: unlink qh4-0001/ffff880133fd5f00 start 1 [1/0 us] [ 7.840293] ehci_hcd 0000:00:1d.7: port 4 high speed [ 7.840297] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 7.896068] usb 2-4: new high speed USB device number 2 using ehci_hcd [ 7.956293] ehci_hcd 0000:00:1d.7: port 4 high speed [ 7.956297] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 8.093838] usb 2-4: skipped 3 descriptors after interface [ 8.093842] usb 2-4: skipped 4 descriptors after interface [ 8.093845] usb 2-4: skipped 4 descriptors after interface [ 8.093847] usb 2-4: skipped 2 descriptors after interface [ 8.093850] usb 2-4: skipped 2 descriptors after interface [ 8.093852] usb 2-4: skipped 5 descriptors after interface [ 8.093855] usb 2-4: skipped 4 descriptors after interface [ 8.102586] usb 2-4: skipped 3 descriptors after interface [ 8.102588] usb 2-4: skipped 4 descriptors after interface [ 8.102590] usb 2-4: skipped 4 descriptors after interface [ 8.102593] usb 2-4: skipped 2 descriptors after interface [ 8.102595] usb 2-4: skipped 2 descriptors after interface [ 8.102598] usb 2-4: skipped 5 descriptors after interface [ 8.102701] usb 2-4: default language 0x0409 [ 8.106833] usb 2-4: udev 2, busnum 2, minor = 129 [ 8.106836] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900 [ 8.106838] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.106840] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device [ 8.106842] usb 2-4: Manufacturer: Ericsson [ 8.106844] usb 2-4: SerialNumber: 3541430228088360 [ 8.106968] usb 2-4: usb_probe_device [ 8.106971] usb 2-4: configuration #1 chosen from 2 choices [ 8.109696] usb 2-4: adding 2-4:1.0 (config #1, interface 0) [ 8.109943] usb 2-4: adding 2-4:1.1 (config #1, interface 1) [ 8.129231] usb 2-4: adding 2-4:1.2 (config #1, interface 2) [ 8.131618] usb 2-4: adding 2-4:1.3 (config #1, interface 3) [ 8.133737] usb 2-4: adding 2-4:1.4 (config #1, interface 4) [ 8.135730] usb 2-4: adding 2-4:1.5 (config #1, interface 5) [ 8.137730] usb 2-4: adding 2-4:1.6 (config #1, interface 6) [ 8.139720] usb 2-4: adding 2-4:1.7 (config #1, interface 7) [ 8.141726] usb 2-4: adding 2-4:1.8 (config #1, interface 8) [ 8.143719] usb 2-4: adding 2-4:1.9 (config #1, interface 9) [ 8.145727] usb 2-4: adding 2-4:1.10 (config #1, interface 10) [ 8.147645] drivers/usb/core/inode.c: creating file '002' [ 8.147669] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.147675] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010 [ 8.147682] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.147686] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 8.147694] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00 [ 8.147700] hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 8.153997] cdc_wdm 2-4:1.5: usb_probe_interface [ 8.154001] cdc_wdm 2-4:1.5: usb_probe_interface - got id [ 8.154026] cdc_wdm 2-4:1.5: looking for a minor, starting at 0 [ 8.154113] cdc_wdm 2-4:1.5: cdc-wdm-176: USB WDM device [ 8.154119] cdc_wdm 2-4:1.6: usb_probe_interface [ 8.154121] cdc_wdm 2-4:1.6: usb_probe_interface - got id [ 8.154125] cdc_wdm 2-4:1.6: looking for a minor, starting at 0 [ 8.154161] cdc_wdm 2-4:1.6: cdc-wdm-175: USB WDM device [ 8.154176] usbcore: registered new interface driver cdc_wdm [ 8.156474] cdc_acm 2-4:1.1: usb_probe_interface [ 8.156477] cdc_acm 2-4:1.1: usb_probe_interface - got id [ 8.156594] cdc_acm 2-4:1.1: ttyACM0: USB ACM device [ 8.158130] cdc_acm 2-4:1.3: usb_probe_interface [ 8.158134] cdc_acm 2-4:1.3: usb_probe_interface - got id [ 8.158261] cdc_acm 2-4:1.3: ttyACM1: USB ACM device [ 8.158883] cdc_acm 2-4:1.9: usb_probe_interface [ 8.158886] cdc_acm 2-4:1.9: usb_probe_interface - got id [ 8.159005] cdc_acm 2-4:1.9: ttyACM2: USB ACM device [ 8.159365] usbcore: registered new interface driver cdc_acm [ 8.159367] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 8.161865] cdc_ether 2-4:1.7: usb_probe_interface [ 8.161867] cdc_ether 2-4:1.7: usb_probe_interface - got id [ 8.165545] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00 [ 8.165566] usbcore: registered new interface driver cdc_ether [ 8.166482] usbcore: registered new interface driver zaurus [ 8.272078] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 8.336041] usb usb6: suspend_rh (auto-stop) [ 8.336068] usb usb8: suspend_rh (auto-stop) [ 8.384038] usb 3-1: new full speed USB device number 2 using uhci_hcd [ 8.516035] usb 3-1: ep0 maxpacket = 8 [ 8.548712] usb 3-1: skipped 1 descriptor after interface [ 8.548715] usb 3-1: skipped 1 descriptor after interface [ 8.548717] usb 3-1: skipped 1 descriptor after interface [ 8.552689] usb 3-1: default language 0x0409 [ 8.567688] usb 3-1: udev 2, busnum 3, minor = 257 [ 8.567690] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b [ 8.567693] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.567694] usb 3-1: Product: USB Receiver [ 8.567696] usb 3-1: Manufacturer: Logitech [ 8.567803] usb 3-1: usb_probe_device [ 8.567807] usb 3-1: configuration #1 chosen from 1 choice [ 8.572711] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 8.572749] usb 3-1: adding 3-1:1.1 (config #1, interface 1) [ 8.572779] usb 3-1: adding 3-1:1.2 (config #1, interface 2) [ 8.572835] drivers/usb/core/inode.c: creating file '002' [ 8.572863] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 8.572872] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00 [ 8.572879] hub 4-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 8.580963] usbhid 3-1:1.0: usb_probe_interface [ 8.580966] usbhid 3-1:1.0: usb_probe_interface - got id [ 8.582908] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input13 [ 8.582918] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 17 us [ 8.583044] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0 [ 8.583051] usbhid 3-1:1.1: usb_probe_interface [ 8.583053] usbhid 3-1:1.1: usb_probe_interface - got id [ 8.584053] usb usb7: suspend_rh (auto-stop) [ 8.584059] usb usb5: suspend_rh (auto-stop) [ 8.586065] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input14 [ 8.586070] uhci_hcd 0000:00:1a.0: reserve dev 2 ep82-INT, period 2, phase 1, 17 us [ 8.586154] usbhid 3-1:1.1: looking for a minor, starting at 0 [ 8.586235] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1 [ 8.586242] usbhid 3-1:1.2: usb_probe_interface [ 8.586244] usbhid 3-1:1.2: usb_probe_interface - got id [ 8.591717] usbhid 3-1:1.2: looking for a minor, starting at 0 [ 8.591791] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input2 [ 8.591804] usbcore: registered new interface driver usbhid [ 8.591806] usbhid: USB HID core driver [ 8.704084] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 8.817563] usb 4-2: new full speed USB device number 2 using uhci_hcd [ 8.972095] usb 4-2: skipped 1 descriptor after interface [ 8.975095] usb 4-2: default language 0x0409 [ 8.986091] usb 4-2: udev 2, busnum 4, minor = 385 [ 8.986093] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 [ 8.986095] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.986097] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II [ 8.986099] usb 4-2: Manufacturer: Lenovo Computer Corp [ 8.986206] usb 4-2: usb_probe_device [ 8.986210] usb 4-2: configuration #1 chosen from 1 choice [ 8.988097] usb 4-2: adding 4-2:1.0 (config #1, interface 0) [ 8.988149] usb 4-2: adding 4-2:1.1 (config #1, interface 1) [ 8.988188] usb 4-2: adding 4-2:1.2 (config #1, interface 2) [ 8.988227] usb 4-2: adding 4-2:1.3 (config #1, interface 3) [ 8.988294] drivers/usb/core/inode.c: creating file '002' [ 8.988315] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.988321] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.988325] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 9.000297] Bluetooth: Core ver 2.16 [ 9.002074] NET: Registered protocol family 31 [ 9.002076] Bluetooth: HCI device and connection manager initialized [ 9.002078] Bluetooth: HCI socket layer initialized [ 9.002080] Bluetooth: L2CAP socket layer initialized [ 9.003463] Bluetooth: SCO socket layer initialized [ 9.005897] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 9.005930] btusb 4-2:1.0: usb_probe_interface [ 9.005933] btusb 4-2:1.0: usb_probe_interface - got id [ 9.006103] btusb 4-2:1.2: usb_probe_interface [ 9.006105] btusb 4-2:1.2: usb_probe_interface - got id [ 9.006113] btusb 4-2:1.3: usb_probe_interface [ 9.006115] btusb 4-2:1.3: usb_probe_interface - got id [ 9.006127] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase 0, 23 us [ 9.006132] usbcore: registered new interface driver btusb [ 9.832049] usb 1-6: usb auto-suspend [ 10.031403] NET: Registered protocol family 10 [ 10.178541] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 10.232152] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 10.233455] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.808105] hub 6-0:1.0: hub_suspend [ 10.808123] usb usb6: bus auto-suspend [ 10.808129] usb usb6: suspend_rh [ 10.808157] hub 8-0:1.0: hub_suspend [ 10.808166] usb usb8: bus auto-suspend [ 10.808171] usb usb8: suspend_rh [ 10.988082] hub 5-0:1.0: hub_suspend [ 10.988095] usb usb5: bus auto-suspend [ 10.988101] usb usb5: suspend_rh [ 10.988126] hub 7-0:1.0: hub_suspend [ 10.988135] usb usb7: bus auto-suspend [ 10.988140] usb usb7: suspend_rh [ 11.089108] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 1, phase 0, 23 us [ 11.848039] hub 1-0:1.0: hub_suspend [ 11.848055] usb usb1: bus auto-suspend [ 11.848061] ehci_hcd 0000:00:1a.7: suspend root hub [ 13.513923] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 13.753421] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input15 [ 14.334018] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.537999] eth1: authenticate with 00:27:19:d8:98:f2 (try 1) [ 17.541158] eth1: authenticated [ 17.558218] eth1: associate with 00:27:19:d8:98:f2 (try 1) [ 17.564325] eth1: RX AssocResp from 00:27:19:d8:98:f2 (capab=0x431 status=0 aid=2) [ 17.564333] eth1: associated [ 17.582166] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 24.484769] ------------[ cut here ]------------ [ 24.484777] WARNING: at kernel/printk.c:322 do_syslog+0x89/0x438() [ 24.484779] Hardware name: 2764CTO [ 24.484780] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated). [ 24.484782] Modules linked in: sch_sfq ipv6 ext2 mbcache md_mod acpi_cpufreq mperf btusb bluetooth crc16 usbhid hid zaurus cdc_ether usbnet mii cdc_acm cdc_wdm uvcvideo joydev videodev v4l2_compat_ioctl32 media arc4 uhci_hcd snd_hda_codec_conexant sdhci_pci pcmcia firewire_ohci sdhci mmc_core firewire_core tpm_tis sg thinkpad_acpi sr_mod tpm crc_itu_t tpm_bios nvram cdrom ac battery iwlagn wmi psmouse serio_raw mac80211 evdev thermal yenta_socket pcmcia_rsrc pcmcia_core cfg80211 rfkill snd_hda_intel snd_hda_codec snd_hwdep snd_pcm pcspkr i2c_i801 processor snd_timer snd soundcore iTCO_wdt snd_page_alloc iTCO_vendor_support ehci_hcd e1000e usbcore xfs sd_mod crc_t10dif ahci libahci libata scsi_mod cbc cryptd aes_x86_64 aes_generic dm_crypt dm_mod [last unloaded: scsi_wait_scan] [ 24.484840] Pid: 2705, comm: syslog-ng Not tainted 3.0.0-rc5-00063-g0d72c6f #7 [ 24.484842] Call Trace: [ 24.484845] [<ffffffff8103aa14>] warn_slowpath_common+0x7e/0x96 [ 24.484848] [<ffffffff8103aac0>] warn_slowpath_fmt+0x41/0x43 [ 24.484851] [<ffffffff81043da1>] ? ns_capable+0x35/0x4a [ 24.484854] [<ffffffff8103b060>] do_syslog+0x89/0x438 [ 24.484857] [<ffffffff81103d9c>] ? _d_rehash+0x44/0x46 [ 24.484860] [<ffffffff81103dc4>] ? d_rehash+0x26/0x2b [ 24.484863] [<ffffffff81143c6f>] kmsg_open+0x17/0x19 [ 24.484866] [<ffffffff8113afe4>] proc_reg_open+0xab/0x148 [ 24.484869] [<ffffffff81143c58>] ? kmsg_release+0x18/0x18 [ 24.484871] [<ffffffff81143c40>] ? seq_open_net+0x76/0x76 [ 24.484874] [<ffffffff8113af39>] ? proc_alloc_inode+0x9c/0x9c [ 24.484878] [<ffffffff810f1372>] __dentry_open+0x1fb/0x312 [ 24.484881] [<ffffffff810fc9c3>] ? do_lookup+0x240/0x298 [ 24.484883] [<ffffffff810f2337>] nameidata_to_filp+0x5b/0x62 [ 24.484886] [<ffffffff810fe2d2>] do_last+0x5c4/0x725 [ 24.484889] [<ffffffff810fefa7>] path_openat+0xc3/0x368 [ 24.484892] [<ffffffff8108b7e3>] ? call_rcu+0x10/0x12 [ 24.484894] [<ffffffff810fc077>] ? putname+0x2d/0x36 [ 24.484897] [<ffffffff810ff27f>] do_filp_open+0x33/0x81 [ 24.484900] [<ffffffff811091ac>] ? alloc_fd+0x104/0x116 [ 24.484903] [<ffffffff810f243d>] do_sys_open+0xff/0x191 [ 24.484906] [<ffffffff810f24ea>] sys_open+0x1b/0x1d [ 24.484910] [<ffffffff81405d3b>] system_call_fastpath+0x16/0x1b [ 24.484912] ---[ end trace fb9b2637d8efb238 ]--- [ 24.514624] auditd (2717): /proc/2717/oom_adj is deprecated, please use /proc/2717/oom_score_adj instead. [ 24.934853] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.934856] Bluetooth: BNEP filters: protocol multicast [ 24.959369] Bluetooth: RFCOMM TTY layer initialized [ 24.959373] Bluetooth: RFCOMM socket layer initialized [ 24.959375] Bluetooth: RFCOMM ver 1.11 [ 25.713397] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase 0, 23 us [ 26.484040] iwlagn 0000:03:00.0: iwlagn_tx_agg_start on ra = 00:27:19:d8:98:f2 tid = 0 [ 27.952073] eth1: no IPv6 routers present [ 35.782932] ata1.00: configured for UDMA/133 [ 35.782935] ata1: EH complete [ 70.473024] PM: Syncing filesystems ... done. [ 71.182076] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 71.196114] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 71.212235] Suspending console(s) (use no_console_suspend to debug) [ 71.214368] usb 2-4: usb suspend [ 71.215664] uhci_hcd 0000:00:1a.0: release dev 2 ep82-INT, period 2, phase 1, 17 us [ 71.216051] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 1, phase 0, 23 us [ 71.216636] uhci_hcd 0000:00:1a.0: release dev 2 ep81-INT, period 8, phase 4, 17 us [ 71.218043] usb 4-2: usb suspend [ 71.218651] usb 3-1: usb suspend [ 71.373252] hub 4-0:1.0: hub_suspend [ 71.373263] usb usb4: bus suspend [ 71.373268] usb usb4: suspend_rh [ 71.373305] hub 3-0:1.0: hub_suspend [ 71.373313] usb usb3: bus suspend [ 71.373317] usb usb3: suspend_rh [ 71.373350] hub 2-0:1.0: hub_suspend [ 71.373357] usb usb2: bus suspend [ 71.373363] ehci_hcd 0000:00:1d.7: suspend root hub [ 71.373721] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 71.373793] sd 0:0:0:0: [sda] Stopping disk [ 71.457255] ACPI handle has no context! [ 71.457272] sdhci-pci 0000:15:00.2: PCI INT C disabled [ 71.457284] ACPI handle has no context! [ 71.457393] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 71.457405] uhci_hcd 0000:00:1d.2: uhci_pci_suspend [ 71.457424] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 71.457432] uhci_hcd 0000:00:1d.1: uhci_pci_suspend [ 71.457449] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 71.457457] uhci_hcd 0000:00:1d.0: uhci_pci_suspend [ 71.457473] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 71.457576] ehci_hcd 0000:00:1a.7: PCI INT D disabled [ 71.457584] HDA Intel 0000:00:1b.0: PCI INT B disabled [ 71.457592] uhci_hcd 0000:00:1a.2: uhci_pci_suspend [ 71.457610] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 71.457618] uhci_hcd 0000:00:1a.1: uhci_pci_suspend [ 71.457635] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 71.457642] uhci_hcd 0000:00:1a.0: uhci_pci_suspend [ 71.457659] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 71.464090] ACPI handle has no context! [ 71.472082] i915 0000:00:02.0: power state changed by ACPI to D3 [ 71.552504] e1000e 0000:00:19.0: PCI INT A disabled [ 71.552518] e1000e 0000:00:19.0: PME# enabled [ 71.552535] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 71.568091] PM: suspend of devices complete after 354.027 msecs [ 71.584201] ehci_hcd 0000:00:1d.7: wakeup: 0 [ 71.600054] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [ 71.600063] ehci_hcd 0000:00:1d.7: --> PCI D3hot [ 71.600111] uhci_hcd 0000:00:1d.2: wakeup: 0 [ 71.600118] uhci_hcd 0000:00:1d.2: --> PCI D0 [ 71.600165] uhci_hcd 0000:00:1d.1: wakeup: 0 [ 71.600172] uhci_hcd 0000:00:1d.1: --> PCI D0 [ 71.600218] uhci_hcd 0000:00:1d.0: wakeup: 0 [ 71.600236] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 71.600241] uhci_hcd 0000:00:1d.0: --> PCI D3hot [ 71.600300] ehci_hcd 0000:00:1a.7: wakeup: 0 [ 71.616050] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [ 71.616059] ehci_hcd 0000:00:1a.7: --> PCI D3hot [ 71.616106] uhci_hcd 0000:00:1a.2: wakeup: 0 [ 71.616123] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [ 71.616129] uhci_hcd 0000:00:1a.2: --> PCI D3hot [ 71.616176] uhci_hcd 0000:00:1a.1: wakeup: 0 [ 71.616182] uhci_hcd 0000:00:1a.1: --> PCI D0 [ 71.616229] uhci_hcd 0000:00:1a.0: wakeup: 0 [ 71.636057] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 71.636063] uhci_hcd 0000:00:1a.0: --> PCI D3hot [ 71.636195] PM: late suspend of devices complete after 68.095 msecs [ 71.638253] ACPI: Preparing to enter system sleep state S3 [ 71.796094] PM: Saving platform NVS memory [ 71.806249] Disabling non-boot CPUs ... [ 71.806696] Broke affinity for irq 9 [ 71.806708] Broke affinity for irq 12 [ 71.806727] Broke affinity for irq 17 [ 71.967421] CPU 1 is now offline [ 71.968148] Extended CMOS year: 2000 [ 71.968148] ACPI: Low-level resume complete [ 71.968148] PM: Restoring platform NVS memory [ 71.968148] Extended CMOS year: 2000 [ 71.968148] Enabling non-boot CPUs ... [ 71.976326] Booting Node 0 Processor 1 APIC 0x1 [ 71.976328] smpboot cpu 1: start_ip = 99000 [ 71.807837] Disabled fast string operations [ 72.068121] Switched to NOHz mode on CPU #1 [ 72.100754] CPU1 is up [ 72.102589] ACPI: Waking up from system sleep state S3 [ 72.672227] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 72.672285] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 72.672312] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 72.672338] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 72.692056] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 72.692066] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 72.692113] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 72.692137] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 72.692144] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 72.692194] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 72.692219] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 72.692226] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 72.692273] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 72.692294] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 72.692301] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 72.692360] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 72.692392] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 72.692402] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 72.692466] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 72.692530] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc051c041) [ 72.692542] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xc030c020) [ 72.692553] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x9090) [ 72.692575] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 72.692667] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc011c001) [ 72.692681] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x200000f0, writing 0x8080) [ 72.692703] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 72.692810] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 72.692917] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 72.692977] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 72.692984] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 72.693030] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 72.693052] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 72.693059] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 72.693108] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 72.693171] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 72.693244] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 72.693276] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 72.693286] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 72.693467] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 72.708059] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff]) [ 72.708113] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 72.708128] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 72.724055] sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff]) [ 72.724108] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 72.724123] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 72.725120] PM: early resume of devices complete after 53.043 msecs [ 72.725317] i915 0000:00:02.0: power state changed by ACPI to D0 [ 72.725329] i915 0000:00:02.0: power state changed by ACPI to D0 [ 72.725385] i915 0000:00:02.0: setting latency timer to 64 [ 72.725689] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 72.725700] e1000e 0000:00:19.0: PME# disabled [ 72.725820] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X [ 72.727986] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 72.727994] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 72.728035] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 72.728048] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 72.728057] uhci_hcd 0000:00:1a.0: uhci_pci_resume [ 72.728065] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00 [ 72.728071] uhci_hcd 0000:00:1a.0: Performing full reset [ 72.728103] usb usb3: root hub lost power or was reset [ 72.728129] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 72.728141] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 72.728149] uhci_hcd 0000:00:1a.1: uhci_pci_resume [ 72.728156] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 72.728162] uhci_hcd 0000:00:1a.1: Performing full reset [ 72.728192] usb usb4: root hub lost power or was reset [ 72.728211] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 72.728218] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 72.728228] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 72.728240] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 72.728248] uhci_hcd 0000:00:1a.2: uhci_pci_resume [ 72.728255] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000 [ 72.728260] uhci_hcd 0000:00:1a.2: Performing full reset [ 72.728290] usb usb5: root hub lost power or was reset [ 72.728312] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 72.728322] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 72.728335] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 72.728347] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 72.728437] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 72.728454] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 72.728518] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 72.728621] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 72.728628] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 72.728639] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 72.728651] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 72.728659] uhci_hcd 0000:00:1d.0: uhci_pci_resume [ 72.728666] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00 [ 72.728672] uhci_hcd 0000:00:1d.0: Performing full reset [ 72.728702] usb usb6: root hub lost power or was reset [ 72.728724] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 72.728736] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 72.728743] uhci_hcd 0000:00:1d.1: uhci_pci_resume [ 72.728751] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 72.728756] uhci_hcd 0000:00:1d.1: Performing full reset [ 72.728786] usb usb7: root hub lost power or was reset [ 72.728807] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 72.728820] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 72.728827] uhci_hcd 0000:00:1d.2: uhci_pci_resume [ 72.728835] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 [ 72.728840] uhci_hcd 0000:00:1d.2: Performing full reset [ 72.728870] usb usb8: root hub lost power or was reset [ 72.728891] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 72.728901] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 72.728914] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 72.728926] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 72.729008] pci 0000:00:1e.0: setting latency timer to 64 [ 72.729036] ahci 0000:00:1f.2: setting latency timer to 64 [ 72.729151] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 72.729159] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 72.730227] sd 0:0:0:0: [sda] Starting disk [ 72.730330] usb usb1: usb resume [ 72.730338] ehci_hcd 0000:00:1a.7: resume root hub [ 72.730466] usb usb2: usb resume [ 72.730472] ehci_hcd 0000:00:1d.7: resume root hub [ 72.730580] usb usb3: usb resume [ 72.730582] usb usb3: wakeup_rh [ 72.730663] usb usb4: usb resume [ 72.730664] usb usb4: wakeup_rh [ 72.730742] usb usb5: usb resume [ 72.730743] usb usb5: wakeup_rh [ 72.730825] usb usb6: usb resume [ 72.730826] usb usb6: wakeup_rh [ 72.730895] usb usb7: usb resume [ 72.730896] usb usb7: wakeup_rh [ 72.730976] usb usb8: usb resume [ 72.730978] usb usb8: wakeup_rh [ 72.744069] hub 3-0:1.0: hub_reset_resume [ 72.744077] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 72.744097] hub 4-0:1.0: hub_reset_resume [ 72.744103] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 72.744115] hub 5-0:1.0: hub_reset_resume [ 72.744120] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 72.744133] hub 6-0:1.0: hub_reset_resume [ 72.744138] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 72.744150] hub 7-0:1.0: hub_reset_resume [ 72.744155] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 72.744168] hub 8-0:1.0: hub_reset_resume [ 72.744174] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 72.744877] legacy_resume(): pnp_bus_resume+0x0/0x67 returns -19 [ 72.744879] PM: Device 00:0a failed to resume: error -19 [ 72.756043] hub 2-0:1.0: hub_resume [ 72.756057] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001002 0 ACK POWER sig=se0 CSC [ 72.756060] hub 2-0:1.0: port 4: status 0100 change 0001 [ 72.784150] firewire_core: skipped bus generations, destroying all nodes [ 72.826917] Extended CMOS year: 2000 [ 72.848107] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00 [ 72.848117] hub 3-0:1.0: port 1: status 0100 change 0003 [ 72.848160] uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00 [ 72.848167] hub 4-0:1.0: port 2: status 0100 change 0003 [ 72.860143] hub 2-0:1.0: port 4 status 0000.0100 after resume, -19 [ 72.860149] usb 2-4: can't resume, status -19 [ 72.860154] hub 2-0:1.0: logical disconnect on port 4 [ 72.860314] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion [ 72.860327] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 72.860567] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001800 0 ACK POWER sig=j [ 72.860575] ehci_hcd 0000:00:1a.7: failed handover port 1: 1800 [ 72.876091] hub 1-0:1.0: hub_resume [ 72.876106] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 72.876116] hub 1-0:1.0: port 1: status 0501 change 0001 [ 72.876142] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 72.876165] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT [ 72.876173] hub 1-0:1.0: port 6: status 0501 change 0001 [ 72.980142] usb 1-6: finish reset-resume [ 72.980176] hub 3-0:1.0: port 1 status 0000.0100 after resume, -19 [ 72.980186] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00 [ 72.980193] usb 3-1: can't resume, status -19 [ 72.980198] hub 3-0:1.0: logical disconnect on port 1 [ 72.980205] usb 4-2: finish reset-resume [ 73.036277] ehci_hcd 0000:00:1a.7: port 6 high speed [ 73.036289] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 73.048114] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 73.051002] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 73.052064] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 73.052074] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 73.052106] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 73.056601] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 73.057679] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 73.057688] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 73.058699] ata2.00: configured for UDMA/100 [ 73.092084] usb 1-6: reset high speed USB device number 4 using ehci_hcd [ 73.148333] ehci_hcd 0000:00:1a.7: port 6 high speed [ 73.148346] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 73.284116] firewire_core: rediscovered device fw0 [ 73.336109] usb 4-2: reset full speed USB device number 2 using uhci_hcd [ 73.365888] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 73.365898] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 73.365907] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 73.487102] btusb 4-2:1.0: no reset_resume for driver btusb? [ 73.487110] btusb 4-2:1.1: no reset_resume for driver btusb? [ 73.487116] btusb 4-2:1.0: forced unbind [ 73.506115] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 73.506124] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 73.506133] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 73.566128] ata1.00: configured for UDMA/133 [ 73.614324] thinkpad_acpi: restoring fan level to 0x07 [ 73.807331] PM: resume of devices complete after 1082.079 msecs [ 73.807378] btusb 4-2:1.0: usb_probe_interface [ 73.807384] btusb 4-2:1.0: usb_probe_interface - got id [ 73.808033] usb usb6: suspend_rh (auto-stop) [ 73.808067] usb usb8: suspend_rh (auto-stop) [ 73.808098] usb usb5: suspend_rh (auto-stop) [ 73.808128] usb usb7: suspend_rh (auto-stop) [ 73.808645] Restarting tasks ... [ 73.809723] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase 0, 23 us [ 73.809794] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 73.809810] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 73.809820] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 73.809830] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 73.809840] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000 [ 73.809856] hub 2-0:1.0: port 4, status 0100, change 0000, 12 Mb/s [ 73.809863] usb 2-4: USB disconnect, device number 2 [ 73.809868] usb 2-4: unregistering device [ 73.809874] usb 2-4: unregistering interface 2-4:1.0 [ 73.809956] usb 2-4: unregistering interface 2-4:1.1 [ 73.810598] usb 2-4: unregistering interface 2-4:1.2 [ 73.810692] usb 2-4: unregistering interface 2-4:1.3 [ 73.811085] usb 2-4: unregistering interface 2-4:1.4 [ 73.811180] usb 2-4: unregistering interface 2-4:1.5 [ 73.811231] drivers/usb/core/file.c: removing 0 minor [ 73.811364] usb 2-4: unregistering interface 2-4:1.6 [ 73.811412] drivers/usb/core/file.c: removing 1 minor [ 73.811538] usb 2-4: unregistering interface 2-4:1.7 [ 73.811594] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device [ 73.823457] done. [ 73.823470] video LNXVIDEO:00: Restoring backlight state [ 74.056070] usb usb3: suspend_rh (auto-stop) [ 75.808106] hub 5-0:1.0: hub_suspend [ 75.808119] usb usb5: bus auto-suspend [ 75.808122] usb usb5: suspend_rh [ 75.808415] hub 6-0:1.0: hub_suspend [ 75.808420] usb usb6: bus auto-suspend [ 75.808423] usb usb6: suspend_rh [ 75.808442] hub 7-0:1.0: hub_suspend [ 75.808446] usb usb7: bus auto-suspend [ 75.808448] usb usb7: suspend_rh [ 75.808466] hub 8-0:1.0: hub_suspend [ 75.808471] usb usb8: bus auto-suspend [ 75.808473] usb usb8: suspend_rh > > Alan Stern -- Arkadiusz Miśkiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists