| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1309427470-605-4-git-send-email-balbi@ti.com>
Date: Thu, 30 Jun 2011 12:51:06 +0300
From: Felipe Balbi <balbi@...com>
To: Linux OMAP Mailing List <linux-omap@...r.kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Tony Lindgren <tony@...mide.com>,
Thomas Gleixner <tglx@...utronix.de>,
Felipe Balbi <balbi@...com>
Subject: [PATCH 3/7] mfd: twl4030-irq: drop the kthread
... and use threaded IRQ infrastructure. Later
patches will come dropping both workqueues and
setting the nested thread flag.
Signed-off-by: Felipe Balbi <balbi@...com>
---
drivers/mfd/twl4030-irq.c | 94 ++++++++++-----------------------------------
1 files changed, 21 insertions(+), 73 deletions(-)
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 291364c..e1e0944 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -30,7 +30,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/kthread.h>
#include <linux/slab.h>
#include <linux/i2c/twl.h>
@@ -278,59 +277,6 @@ static const struct sih sih_modules_twl5031[8] = {
static unsigned twl4030_irq_base;
-static struct completion irq_event;
-
-/*
- * This thread processes interrupts reported by the Primary Interrupt Handler.
- */
-static int twl4030_irq_thread(void *data)
-{
- long irq = (long)data;
- static unsigned i2c_errors;
- static const unsigned max_i2c_errors = 100;
-
-
- current->flags |= PF_NOFREEZE;
-
- while (!kthread_should_stop()) {
- int ret;
- int module_irq;
- u8 pih_isr;
-
- /* Wait for IRQ, then read PIH irq status (also blocking) */
- wait_for_completion_interruptible(&irq_event);
-
- ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
- REG_PIH_ISR_P1);
- if (ret) {
- pr_warning("twl4030: I2C error %d reading PIH ISR\n",
- ret);
- if (++i2c_errors >= max_i2c_errors) {
- printk(KERN_ERR "Maximum I2C error count"
- " exceeded. Terminating %s.\n",
- __func__);
- break;
- }
- complete(&irq_event);
- continue;
- }
-
- /* these handlers deal with the relevant SIH irq status */
- local_irq_disable();
- for (module_irq = twl4030_irq_base;
- pih_isr;
- pih_isr >>= 1, module_irq++) {
- if (pih_isr & 0x1)
- generic_handle_irq(module_irq);
- }
- local_irq_enable();
-
- enable_irq(irq);
- }
-
- return 0;
-}
-
/*
* handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
* This is a chained interrupt, so there is no desc->action method for it.
@@ -342,9 +288,25 @@ static int twl4030_irq_thread(void *data)
*/
static irqreturn_t handle_twl4030_pih(int irq, void *devid)
{
- /* Acknowledge, clear *AND* mask the interrupt... */
- disable_irq_nosync(irq);
- complete(devid);
+ int module_irq;
+ irqreturn_t ret;
+ u8 pih_isr;
+
+ ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
+ REG_PIH_ISR_P1);
+ if (ret) {
+ pr_warning("twl4030: I2C error %d reading PIH ISR\n", ret);
+ return IRQ_NONE;
+ }
+
+ /* these handlers deal with the relevant SIH irq status */
+ for (module_irq = twl4030_irq_base;
+ pih_isr;
+ pih_isr >>= 1, module_irq++) {
+ if (pih_isr & 0x1)
+ generic_handle_irq(module_irq);
+ }
+
return IRQ_HANDLED;
}
/*----------------------------------------------------------------------*/
@@ -763,7 +725,6 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
int status;
int i;
- struct task_struct *task;
/*
* Mask and clear all TWL4030 interrupts since initially we do
@@ -806,27 +767,14 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
}
/* install an irq handler to demultiplex the TWL4030 interrupt */
-
-
- init_completion(&irq_event);
-
- status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
- "TWL4030-PIH", &irq_event);
+ status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih,
+ IRQF_DISABLED, "TWL4030-PIH", NULL);
if (status < 0) {
pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
goto fail_rqirq;
}
- task = kthread_run(twl4030_irq_thread, (void *)(long)irq_num,
- "twl4030-irq");
- if (IS_ERR(task)) {
- pr_err("twl4030: could not create irq %d thread!\n", irq_num);
- status = PTR_ERR(task);
- goto fail_kthread;
- }
return status;
-fail_kthread:
- free_irq(irq_num, &irq_event);
fail_rqirq:
/* clean up twl4030_sih_setup */
fail:
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists