| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BANLkTim_TVCq-oStBmLVVEPb5SRkA-HS7SuejXYn1kn1F+CwaA@mail.gmail.com>
Date: Fri, 1 Jul 2011 11:38:50 -0700
From: Sergiu Iordache <sergiu@...gle.com>
To: Marco Stornelli <marco.stornelli@...il.com>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
"Ahmed S. Darwish" <darwish.07@...il.com>,
Artem Bityutskiy <Artem.Bityutskiy@...ia.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/3] char drivers: ramoops debugfs entry
On Fri, Jul 1, 2011 at 11:08 AM, Marco Stornelli
<marco.stornelli@...il.com> wrote:
> Il 01/07/2011 03:28, Sergiu Iordache ha scritto:
>>
>> While ramoops writes to ram, accessing the dump requires using /dev/mem
>> and knowing the memory location (or a similar solution). This patch
>> provides a debugfs interface through which the respective memory
>> area can be easily accessed. It also adds an entry to expose the record
>> size which must be used to divide the memory area into individual dumps
>> and a dump count entry.
>>
>
> Good.
>
>> The entries added are:
>> /sys/kernel/debug/ramoops/full - memory dump of the whole reserved area.
>> /sys/kernel/debug/ramoops/count - number of dumps currently present
>> (will be 0 after a restart).
>
> Is this count really needed?
>
>>
>> Change-Id: Ifbab9af833be9ee0bc1c33bc9871f2fc0eb9d228
>> Signed-off-by: Sergiu Iordache<sergiu@...omium.org>
>> ---
>> The patch was built on the 2.6.38 kernel and is based on the following
>> patches which were applied from the mmotm tree:
>> ramoops-add-new-line-to-each-print
>> ramoops-use-module-parameters-instead-of-platform-data-if-not-available
>>
>> ramoops-use-module-parameters-instead-of-platform-data-if-not-available-checkpatch-fixes
>>
>> drivers/char/ramoops.c | 101
>> ++++++++++++++++++++++++++++++++++++++++++++++++
>> 1 files changed, 101 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/char/ramoops.c b/drivers/char/ramoops.c
>> index f34077e..9c0e30e 100644
>> --- a/drivers/char/ramoops.c
>> +++ b/drivers/char/ramoops.c
>> @@ -30,9 +30,15 @@
>> #include<linux/platform_device.h>
>> #include<linux/slab.h>
>> #include<linux/ramoops.h>
>> +#include<linux/uaccess.h>
>> +#include<linux/debugfs.h>
>>
>> #define RAMOOPS_KERNMSG_HDR "===="
>> #define MIN_MEM_SIZE 4096UL
>> +#define RAMOOPS_DIR "ramoops"
>> +#define RAMOOPS_FULL "full"
>> +#define RAMOOPS_RS "record_size"
>> +#define RAMOOPS_COUNT "count"
>>
>> static ulong record_size = 4096UL;
>> module_param(record_size, ulong, 0400);
>> @@ -67,6 +73,39 @@ static struct ramoops_context {
>>
>> static struct platform_device *dummy;
>> static struct ramoops_platform_data *dummy_data;
>> +static DEFINE_MUTEX(ramoops_mutex);
>> +
>> +/* Debugfs entries for ramoops */
>> +static struct dentry *ramoops_dir, *ramoops_full_entry,
>> *ramoops_rs_entry,
>> + *ramoops_count_entry;
>> +
>> +/* Entry to have access to the whole memory area */
>> +static ssize_t ramoops_read_full(struct file *file, char __user *buf,
>> + size_t count, loff_t *ppos)
>> +{
>> + struct ramoops_context *cxt =&oops_cxt;
>> +
>> + mutex_lock(&ramoops_mutex);
>> + if (*ppos + count> cxt->size)
>> + count = cxt->size - *ppos;
>> + if (*ppos> cxt->size) {
>> + count = 0;
>> + goto out;
>> + }
>> + if (copy_to_user(buf, cxt->virt_addr + *ppos, count)) {
>> + count = -EFAULT;
>> + goto out;
>> + }
>> + *ppos += count;
>> +
>> +out:
>> + mutex_unlock(&ramoops_mutex);
>> + return count;
>> +}
>> +
>> +static const struct file_operations ramoops_full_fops = {
>> + .read = ramoops_read_full,
>> +};
>>
>> static void ramoops_do_dump(struct kmsg_dumper *dumper,
>> enum kmsg_dump_reason reason, const char *s1, unsigned long
>> l1,
>> @@ -89,6 +128,7 @@ static void ramoops_do_dump(struct kmsg_dumper *dumper,
>> if (reason == KMSG_DUMP_OOPS&& !cxt->dump_oops)
>> return;
>>
>> + mutex_lock(&ramoops_mutex);
>> buf = cxt->virt_addr + (cxt->count * cxt->record_size);
>> buf_orig = buf;
>>
>> @@ -110,6 +150,7 @@ static void ramoops_do_dump(struct kmsg_dumper
>> *dumper,
>> memcpy(buf + l1_cpy, s2 + s2_start, l2_cpy);
>>
>> cxt->count = (cxt->count + 1) % cxt->max_count;
>> + mutex_unlock(&ramoops_mutex);
>> }
>>
>> static int __init ramoops_probe(struct platform_device *pdev)
>> @@ -168,6 +209,51 @@ static int __init ramoops_probe(struct
>> platform_device *pdev)
>> goto fail1;
>> }
>>
>> + /* Initialize debugfs entry so the memory can be easily accessed
>> */
>> + ramoops_dir = debugfs_create_dir(RAMOOPS_DIR, NULL);
>> + if (ramoops_dir == NULL) {
>> + err = -ENOMEM;
>> + pr_err("debugfs directory entry creation failed\n");
>> + goto out;
>> + }
>> +
>> + ramoops_full_entry = debugfs_create_file(RAMOOPS_FULL, 0444,
>> + ramoops_dir,
>> NULL,&ramoops_full_fops);
>> +
>> + if (ramoops_full_entry == NULL) {
>> + err = -ENOMEM;
>> + pr_err("debugfs full entry creation failed\n");
>> + goto no_ramoops_full;
>> + }
>> +
>> + /*
>> + * Since ramoops returns records of record_size it is useful to
>> + * know the record size from userspace so we can parse the result
>> + * Since the record size is usually small we don't mind converting
>> + * it to a u32 from ulong.
>> + */
>> + ramoops_rs_entry = debugfs_create_u32(RAMOOPS_RS, 0444,
>> + ramoops_dir, (u32
>> *)&cxt->record_size);
>> +
>
> Like above. The result can be parsed in an easy way due to
> RAMOOPS_KERNMSG_HDR.
I've added the count to make it easier to parse the records by getting
record_size chunks out of the file. One of the problems I see is that
you know the header (where it starts) but it's hard to find out where
the last record in a series ends.
By the way, is there any reason why the (whole) preserved ram area
doesn't get cleared in ramoops when the first dump is taken? On one
hand you could overwrite old dumps but they will get overwritten
anyway and they are probably old and of no interest.
Because right now after a dump you usually have:
Useful data record (record_size size)
Random data from ram (record_size size)
Random data from ram (record_size size)
Etc
This makes it harder to parse (even if you know the record size, as
there's a very small but possible chance that the header is in found
in the random data without it being a valid dump).
Sergiu
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists