| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1309546474-15363-6-git-send-email-keshava_mgowda@ti.com>
Date: Sat, 2 Jul 2011 00:24:33 +0530
From: Keshava Munegowda <keshava_mgowda@...com>
To: <linux-usb@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Keshava Munegowda <keshava_mgowda@...com>, balbi@...com,
gadiyar@...com, sameo@...ux.intel.com, parthab@...ia.ti.com,
tony@...mide.com, khilman@...com, b-cousson@...com, paul@...an.com,
johnstul@...ibm.com, vishwanath.bs@...com,
Keshava Munegowda <Keshava_mgowda@...com>
Subject: [PATCH 5/6 v2] arm: omap: usb: Runtime PM support
From: Keshava Munegowda <Keshava_mgowda@...com>
The usbhs core driver does not enable/disable the intefrace and
fucntional clocks; These clocks are handled by hwmod and runtime pm,
hence insted of the clock enable/disable, the runtime pm APIS are
used. however,the port clocks and tll clocks are handled
by the usbhs core.
In this architecture, the usbhs is core driver and it is parent of
ehci and ohci drivers.The earlier APIs omap_usbhs_enable and
omap_usbhs_disable of usbhs core driver are removed;
The ehci and ohci drivers call the pm_runtime_get_sync and
pm_runtime_put_sync of parent device usbhs core.
In fact, the runtime framework takes care the get sync and
put sync of the child in turn call the get sync and put sync
of parent too; but calling get sync and put sync of parent is
by ASYNC mode; This mode queues the work item in runtime pm
work queue, which not getting scheduled in case of global suspend path.
so, here ehci and ohci runtim pm is not required, these
drivers will pass the parent usbhs dev pointer in runtime pm APIs.
Signed-off-by: Keshava Munegowda <keshava_mgowda@...com>
---
arch/arm/plat-omap/include/plat/usb.h | 3 -
drivers/mfd/omap-usb-host.c | 618 +++++++++++++++------------------
drivers/usb/host/ehci-omap.c | 14 +-
drivers/usb/host/ohci-omap3.c | 12 +-
4 files changed, 290 insertions(+), 357 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 17d3c93..2b66dc2 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -100,9 +100,6 @@ extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
-extern int omap_usbhs_enable(struct device *dev);
-extern void omap_usbhs_disable(struct device *dev);
-
extern int omap4430_phy_power(struct device *dev, int ID, int on);
extern int omap4430_phy_set_clk(struct device *dev, int on);
extern int omap4430_phy_init(struct device *dev);
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 43de12a..521ee86 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -164,7 +164,6 @@ struct usbhs_hcd_omap {
u32 usbhs_rev;
spinlock_t lock;
- int count;
};
/*-------------------------------------------------------------------------*/
@@ -314,218 +313,6 @@ err_end:
return ret;
}
-/**
- * usbhs_omap_probe - initialize TI-based HCDs
- *
- * Allocates basic resources for this USB host controller.
- */
-static int __devinit usbhs_omap_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct usbhs_omap_platform_data *pdata = dev->platform_data;
- struct usbhs_hcd_omap *omap;
- struct resource *res;
- int ret = 0;
- int i;
-
- if (!pdata) {
- dev_err(dev, "Missing platform data\n");
- ret = -ENOMEM;
- goto end_probe;
- }
-
- omap = kzalloc(sizeof(*omap), GFP_KERNEL);
- if (!omap) {
- dev_err(dev, "Memory allocation failed\n");
- ret = -ENOMEM;
- goto end_probe;
- }
-
- spin_lock_init(&omap->lock);
-
- for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
- omap->platdata.port_mode[i] = pdata->port_mode[i];
-
- omap->platdata.ehci_data = pdata->ehci_data;
- omap->platdata.ohci_data = pdata->ohci_data;
-
- pm_runtime_enable(&pdev->dev);
-
- omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
- if (IS_ERR(omap->utmi_p1_fck)) {
- ret = PTR_ERR(omap->utmi_p1_fck);
- dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
- goto err_end;
- }
-
- omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
- if (IS_ERR(omap->xclk60mhsp1_ck)) {
- ret = PTR_ERR(omap->xclk60mhsp1_ck);
- dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
- goto err_utmi_p1_fck;
- }
-
- omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
- if (IS_ERR(omap->utmi_p2_fck)) {
- ret = PTR_ERR(omap->utmi_p2_fck);
- dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
- goto err_xclk60mhsp1_ck;
- }
-
- omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
- if (IS_ERR(omap->xclk60mhsp2_ck)) {
- ret = PTR_ERR(omap->xclk60mhsp2_ck);
- dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
- goto err_utmi_p2_fck;
- }
-
- omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
- if (IS_ERR(omap->usbhost_p1_fck)) {
- ret = PTR_ERR(omap->usbhost_p1_fck);
- dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
- goto err_xclk60mhsp2_ck;
- }
-
- omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
- if (IS_ERR(omap->usbtll_p1_fck)) {
- ret = PTR_ERR(omap->usbtll_p1_fck);
- dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
- goto err_usbhost_p1_fck;
- }
-
- omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
- if (IS_ERR(omap->usbhost_p2_fck)) {
- ret = PTR_ERR(omap->usbhost_p2_fck);
- dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
- goto err_usbtll_p1_fck;
- }
-
- omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
- if (IS_ERR(omap->usbtll_p2_fck)) {
- ret = PTR_ERR(omap->usbtll_p2_fck);
- dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
- goto err_usbhost_p2_fck;
- }
-
- omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
- if (IS_ERR(omap->init_60m_fclk)) {
- ret = PTR_ERR(omap->init_60m_fclk);
- dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
- goto err_usbtll_p2_fck;
- }
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
- if (!res) {
- dev_err(dev, "UHH EHCI get resource failed\n");
- ret = -ENODEV;
- goto err_init_60m_fclk;
- }
-
- omap->uhh_base = ioremap(res->start, resource_size(res));
- if (!omap->uhh_base) {
- dev_err(dev, "UHH ioremap failed\n");
- ret = -ENOMEM;
- goto err_init_60m_fclk;
- }
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
- if (!res) {
- dev_err(dev, "UHH EHCI get resource failed\n");
- ret = -ENODEV;
- goto err_tll;
- }
-
- omap->tll_base = ioremap(res->start, resource_size(res));
- if (!omap->tll_base) {
- dev_err(dev, "TLL ioremap failed\n");
- ret = -ENOMEM;
- goto err_tll;
- }
-
- platform_set_drvdata(pdev, omap);
-
- ret = omap_usbhs_alloc_children(pdev);
- if (ret) {
- dev_err(dev, "omap_usbhs_alloc_children failed\n");
- goto err_alloc;
- }
-
- goto end_probe;
-
-err_alloc:
- iounmap(omap->tll_base);
-
-err_tll:
- iounmap(omap->uhh_base);
-
-err_init_60m_fclk:
- clk_put(omap->init_60m_fclk);
-
-err_usbtll_p2_fck:
- clk_put(omap->usbtll_p2_fck);
-
-err_usbhost_p2_fck:
- clk_put(omap->usbhost_p2_fck);
-
-err_usbtll_p1_fck:
- clk_put(omap->usbtll_p1_fck);
-
-err_usbhost_p1_fck:
- clk_put(omap->usbhost_p1_fck);
-
-err_xclk60mhsp2_ck:
- clk_put(omap->xclk60mhsp2_ck);
-
-err_utmi_p2_fck:
- clk_put(omap->utmi_p2_fck);
-
-err_xclk60mhsp1_ck:
- clk_put(omap->xclk60mhsp1_ck);
-
-err_utmi_p1_fck:
- clk_put(omap->utmi_p1_fck);
-
-err_end:
- pm_runtime_disable(&pdev->dev);
- kfree(omap);
-
-end_probe:
- return ret;
-}
-
-/**
- * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
- * @pdev: USB Host Controller being removed
- *
- * Reverses the effect of usbhs_omap_probe().
- */
-static int __devexit usbhs_omap_remove(struct platform_device *pdev)
-{
- struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
-
- if (omap->count != 0) {
- dev_err(&pdev->dev,
- "Either EHCI or OHCI is still using usbhs core\n");
- return -EBUSY;
- }
-
- iounmap(omap->tll_base);
- iounmap(omap->uhh_base);
- clk_put(omap->init_60m_fclk);
- clk_put(omap->usbtll_p2_fck);
- clk_put(omap->usbhost_p2_fck);
- clk_put(omap->usbtll_p1_fck);
- clk_put(omap->usbhost_p1_fck);
- clk_put(omap->xclk60mhsp2_ck);
- clk_put(omap->utmi_p2_fck);
- clk_put(omap->xclk60mhsp1_ck);
- clk_put(omap->utmi_p1_fck);
- pm_runtime_disable(&pdev->dev);
- kfree(omap);
-
- return 0;
-}
-
static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
{
switch (pmode) {
@@ -634,26 +421,73 @@ static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
}
}
-static int usbhs_enable(struct device *dev)
+static int usbhs_runtime_resume(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = &omap->platdata;
- unsigned long flags = 0;
- int ret = 0;
- unsigned reg;
- dev_dbg(dev, "starting TI HSUSB Controller\n");
+ dev_dbg(dev, "usbhs_runtime_resume\n");
+
if (!pdata) {
dev_dbg(dev, "missing platform_data\n");
return -ENODEV;
}
- spin_lock_irqsave(&omap->lock, flags);
- if (omap->count > 0)
- goto end_count;
+ if (is_omap_usbhs_rev2(omap)) {
+ if (is_ehci_tll_mode(pdata->port_mode[0])) {
+ clk_enable(omap->usbhost_p1_fck);
+ clk_enable(omap->usbtll_p1_fck);
+ }
+ if (is_ehci_tll_mode(pdata->port_mode[1])) {
+ clk_enable(omap->usbhost_p2_fck);
+ clk_enable(omap->usbtll_p2_fck);
+ }
+ clk_enable(omap->utmi_p1_fck);
+ clk_enable(omap->utmi_p2_fck);
+ }
+ return 0;
+}
+
+static int usbhs_runtime_suspend(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+
+ dev_dbg(dev, "usbhs_runtime_suspend\n");
+
+ if (!pdata) {
+ dev_dbg(dev, "missing platform_data\n");
+ return -ENODEV;
+ }
+
+ if (is_omap_usbhs_rev2(omap)) {
+ if (is_ehci_tll_mode(pdata->port_mode[0])) {
+ clk_disable(omap->usbhost_p1_fck);
+ clk_disable(omap->usbtll_p1_fck);
+ }
+ if (is_ehci_tll_mode(pdata->port_mode[1])) {
+ clk_disable(omap->usbhost_p2_fck);
+ clk_disable(omap->usbtll_p2_fck);
+ }
+ clk_disable(omap->utmi_p2_fck);
+ clk_disable(omap->utmi_p1_fck);
+ }
+ return 0;
+}
+
+static void omap_usbhs_init(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+ unsigned long flags = 0;
+ unsigned reg;
+
+ dev_dbg(dev, "starting TI HSUSB Controller\n");
pm_runtime_get_sync(dev);
+ spin_lock_irqsave(&omap->lock, flags);
+
if (pdata->ehci_data->phy_reset) {
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
gpio_request(pdata->ehci_data->reset_gpio_port[0],
@@ -676,6 +510,14 @@ static int usbhs_enable(struct device *dev)
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
+ /*
+ * Really enable the port clocks
+ * first call of pm_runtime_get_sync does not enable these
+ * port clocks; because omap->usbhs_rev was aviable
+ * This omap->usbhs_rev is aviable now!
+ */
+ usbhs_runtime_resume(dev);
+
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
/* setup ULPI bypass and burst configurations */
reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
@@ -721,49 +563,6 @@ static int usbhs_enable(struct device *dev)
reg &= ~OMAP4_P1_MODE_CLEAR;
reg &= ~OMAP4_P2_MODE_CLEAR;
- if (is_ehci_phy_mode(pdata->port_mode[0])) {
- ret = clk_set_parent(omap->utmi_p1_fck,
- omap->xclk60mhsp1_ck);
- if (ret != 0) {
- dev_err(dev, "xclk60mhsp1_ck set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
- ret = clk_set_parent(omap->utmi_p1_fck,
- omap->init_60m_fclk);
- if (ret != 0) {
- dev_err(dev, "init_60m_fclk set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- clk_enable(omap->usbhost_p1_fck);
- clk_enable(omap->usbtll_p1_fck);
- }
-
- if (is_ehci_phy_mode(pdata->port_mode[1])) {
- ret = clk_set_parent(omap->utmi_p2_fck,
- omap->xclk60mhsp2_ck);
- if (ret != 0) {
- dev_err(dev, "xclk60mhsp1_ck set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
- ret = clk_set_parent(omap->utmi_p2_fck,
- omap->init_60m_fclk);
- if (ret != 0) {
- dev_err(dev, "init_60m_fclk set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- clk_enable(omap->usbhost_p2_fck);
- clk_enable(omap->usbtll_p2_fck);
- }
-
- clk_enable(omap->utmi_p1_fck);
- clk_enable(omap->utmi_p2_fck);
-
if (is_ehci_tll_mode(pdata->port_mode[0]) ||
(is_ohci_port(pdata->port_mode[0])))
reg |= OMAP4_P1_MODE_TLL;
@@ -809,14 +608,17 @@ static int usbhs_enable(struct device *dev)
(pdata->ehci_data->reset_gpio_port[1], 1);
}
-end_count:
- omap->count++;
spin_unlock_irqrestore(&omap->lock, flags);
- return 0;
-
-err_tll:
pm_runtime_put_sync(dev);
- spin_unlock_irqrestore(&omap->lock, flags);
+}
+
+static void omap_usbhs_deinit(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+
+ dev_dbg(dev, "stopping TI HSUSB Controller\n");
+
if (pdata->ehci_data->phy_reset) {
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
gpio_free(pdata->ehci_data->reset_gpio_port[0]);
@@ -824,112 +626,256 @@ err_tll:
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
gpio_free(pdata->ehci_data->reset_gpio_port[1]);
}
- return ret;
}
-static void usbhs_disable(struct device *dev)
+/**
+ * usbhs_omap_probe - initialize TI-based HCDs
+ *
+ * Allocates basic resources for this USB host controller.
+ */
+static int __devinit usbhs_omap_probe(struct platform_device *pdev)
{
- struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
- struct usbhs_omap_platform_data *pdata = &omap->platdata;
- unsigned long flags = 0;
- unsigned long timeout;
+ struct device *dev = &pdev->dev;
+ struct usbhs_omap_platform_data *pdata = dev->platform_data;
+ struct usbhs_hcd_omap *omap;
+ struct resource *res;
+ int ret = 0;
+ int i;
- dev_dbg(dev, "stopping TI HSUSB Controller\n");
+ if (!pdata) {
+ dev_err(dev, "Missing platform data\n");
+ ret = -ENOMEM;
+ goto end_probe;
+ }
- spin_lock_irqsave(&omap->lock, flags);
+ omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+ if (!omap) {
+ dev_err(dev, "Memory allocation failed\n");
+ ret = -ENOMEM;
+ goto end_probe;
+ }
- if (omap->count == 0)
- goto end_disble;
+ spin_lock_init(&omap->lock);
- omap->count--;
+ for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+ omap->platdata.port_mode[i] = pdata->port_mode[i];
- if (omap->count != 0)
- goto end_disble;
+ omap->platdata.ehci_data = pdata->ehci_data;
+ omap->platdata.ohci_data = pdata->ohci_data;
- /* Reset OMAP modules for insmod/rmmod to work */
- usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
- is_omap_usbhs_rev2(omap) ?
- OMAP4_UHH_SYSCONFIG_SOFTRESET :
- OMAP_UHH_SYSCONFIG_SOFTRESET);
+ pm_runtime_enable(dev);
- timeout = jiffies + msecs_to_jiffies(100);
- while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
- & (1 << 0))) {
- cpu_relax();
+ omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
+ if (IS_ERR(omap->utmi_p1_fck)) {
+ ret = PTR_ERR(omap->utmi_p1_fck);
+ dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
+ goto err_end;
+ }
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
+ omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+ if (IS_ERR(omap->xclk60mhsp1_ck)) {
+ ret = PTR_ERR(omap->xclk60mhsp1_ck);
+ dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
+ goto err_utmi_p1_fck;
}
- while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
- & (1 << 1))) {
- cpu_relax();
+ omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
+ if (IS_ERR(omap->utmi_p2_fck)) {
+ ret = PTR_ERR(omap->utmi_p2_fck);
+ dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+ goto err_xclk60mhsp1_ck;
+ }
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
+ omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+ if (IS_ERR(omap->xclk60mhsp2_ck)) {
+ ret = PTR_ERR(omap->xclk60mhsp2_ck);
+ dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
+ goto err_utmi_p2_fck;
}
- while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
- & (1 << 2))) {
- cpu_relax();
+ omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
+ if (IS_ERR(omap->usbhost_p1_fck)) {
+ ret = PTR_ERR(omap->usbhost_p1_fck);
+ dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
+ goto err_xclk60mhsp2_ck;
+ }
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
+ omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
+ if (IS_ERR(omap->usbtll_p1_fck)) {
+ ret = PTR_ERR(omap->usbtll_p1_fck);
+ dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
+ goto err_usbhost_p1_fck;
}
- usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
+ omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
+ if (IS_ERR(omap->usbhost_p2_fck)) {
+ ret = PTR_ERR(omap->usbhost_p2_fck);
+ dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
+ goto err_usbtll_p1_fck;
+ }
- while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
- & (1 << 0))) {
- cpu_relax();
+ omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
+ if (IS_ERR(omap->usbtll_p2_fck)) {
+ ret = PTR_ERR(omap->usbtll_p2_fck);
+ dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
+ goto err_usbhost_p2_fck;
+ }
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
+ omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
+ if (IS_ERR(omap->init_60m_fclk)) {
+ ret = PTR_ERR(omap->init_60m_fclk);
+ dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
+ goto err_usbtll_p2_fck;
}
- if (is_omap_usbhs_rev2(omap)) {
- if (is_ehci_tll_mode(pdata->port_mode[0]))
- clk_enable(omap->usbtll_p1_fck);
- if (is_ehci_tll_mode(pdata->port_mode[1]))
- clk_enable(omap->usbtll_p2_fck);
- clk_disable(omap->utmi_p2_fck);
- clk_disable(omap->utmi_p1_fck);
+ if (is_ehci_phy_mode(pdata->port_mode[0])) {
+ /* for OMAP3 , the clk set paretn fails */
+ ret = clk_set_parent(omap->utmi_p1_fck,
+ omap->xclk60mhsp1_ck);
+ if (ret != 0)
+ dev_err(dev, "xclk60mhsp1_ck set parent"
+ "failed error:%d\n", ret);
+ } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
+ ret = clk_set_parent(omap->utmi_p1_fck,
+ omap->init_60m_fclk);
+ if (ret != 0)
+ dev_err(dev, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
}
- pm_runtime_put_sync(dev);
+ if (is_ehci_phy_mode(pdata->port_mode[1])) {
+ ret = clk_set_parent(omap->utmi_p2_fck,
+ omap->xclk60mhsp2_ck);
+ if (ret != 0)
+ dev_err(dev, "xclk60mhsp2_ck set parent"
+ "failed error:%d\n", ret);
+ } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
+ ret = clk_set_parent(omap->utmi_p2_fck,
+ omap->init_60m_fclk);
+ if (ret != 0)
+ dev_err(dev, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
+ }
- /* The gpio_free migh sleep; so unlock the spinlock */
- spin_unlock_irqrestore(&omap->lock, flags);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
+ if (!res) {
+ dev_err(dev, "UHH EHCI get resource failed\n");
+ ret = -ENODEV;
+ goto err_init_60m_fclk;
+ }
- if (pdata->ehci_data->phy_reset) {
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
- gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+ omap->uhh_base = ioremap(res->start, resource_size(res));
+ if (!omap->uhh_base) {
+ dev_err(dev, "UHH ioremap failed\n");
+ ret = -ENOMEM;
+ goto err_init_60m_fclk;
+ }
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
- gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
+ if (!res) {
+ dev_err(dev, "UHH EHCI get resource failed\n");
+ ret = -ENODEV;
+ goto err_tll;
}
- return;
-end_disble:
- spin_unlock_irqrestore(&omap->lock, flags);
-}
+ omap->tll_base = ioremap(res->start, resource_size(res));
+ if (!omap->tll_base) {
+ dev_err(dev, "TLL ioremap failed\n");
+ ret = -ENOMEM;
+ goto err_tll;
+ }
-int omap_usbhs_enable(struct device *dev)
-{
- return usbhs_enable(dev->parent);
+ platform_set_drvdata(pdev, omap);
+
+ ret = omap_usbhs_alloc_children(pdev);
+ if (ret) {
+ dev_err(dev, "omap_usbhs_alloc_children failed\n");
+ goto err_alloc;
+ }
+
+ omap_usbhs_init(dev);
+
+ goto end_probe;
+
+err_alloc:
+ iounmap(omap->tll_base);
+
+err_tll:
+ iounmap(omap->uhh_base);
+
+err_init_60m_fclk:
+ clk_put(omap->init_60m_fclk);
+
+err_usbtll_p2_fck:
+ clk_put(omap->usbtll_p2_fck);
+
+err_usbhost_p2_fck:
+ clk_put(omap->usbhost_p2_fck);
+
+err_usbtll_p1_fck:
+ clk_put(omap->usbtll_p1_fck);
+
+err_usbhost_p1_fck:
+ clk_put(omap->usbhost_p1_fck);
+
+err_xclk60mhsp2_ck:
+ clk_put(omap->xclk60mhsp2_ck);
+
+err_utmi_p2_fck:
+ clk_put(omap->utmi_p2_fck);
+
+err_xclk60mhsp1_ck:
+ clk_put(omap->xclk60mhsp1_ck);
+
+err_utmi_p1_fck:
+ clk_put(omap->utmi_p1_fck);
+
+err_end:
+ pm_runtime_disable(dev);
+ kfree(omap);
+
+end_probe:
+ return ret;
}
-EXPORT_SYMBOL_GPL(omap_usbhs_enable);
-void omap_usbhs_disable(struct device *dev)
+/**
+ * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usbhs_omap_probe().
+ */
+static int __devexit usbhs_omap_remove(struct platform_device *pdev)
{
- usbhs_disable(dev->parent);
+ struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+
+ omap_usbhs_deinit(&pdev->dev);
+ iounmap(omap->tll_base);
+ iounmap(omap->uhh_base);
+ clk_put(omap->init_60m_fclk);
+ clk_put(omap->usbtll_p2_fck);
+ clk_put(omap->usbhost_p2_fck);
+ clk_put(omap->usbtll_p1_fck);
+ clk_put(omap->usbhost_p1_fck);
+ clk_put(omap->xclk60mhsp2_ck);
+ clk_put(omap->utmi_p2_fck);
+ clk_put(omap->xclk60mhsp1_ck);
+ clk_put(omap->utmi_p1_fck);
+ pm_runtime_disable(&pdev->dev);
+ kfree(omap);
+
+ return 0;
}
-EXPORT_SYMBOL_GPL(omap_usbhs_disable);
+
+static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
+ .runtime_suspend = usbhs_runtime_suspend,
+ .runtime_resume = usbhs_runtime_resume,
+};
static struct platform_driver usbhs_omap_driver = {
.driver = {
.name = (char *)usbhs_driver_name,
.owner = THIS_MODULE,
+ .pm = &usbhsomap_dev_pm_ops,
},
.remove = __exit_p(usbhs_omap_remove),
};
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 55a57c2..178f63e 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -41,6 +41,7 @@
#include <linux/usb/ulpi.h>
#include <plat/usb.h>
#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
@@ -178,11 +179,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
}
- ret = omap_usbhs_enable(dev);
- if (ret) {
- dev_err(dev, "failed to start usbhs with err %d\n", ret);
- goto err_enable;
- }
+ pm_runtime_get_sync(dev->parent);
/*
* An undocumented "feature" in the OMAP3 EHCI controller,
@@ -228,10 +225,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
return 0;
err_add_hcd:
- omap_usbhs_disable(dev);
-
-err_enable:
- usb_put_hcd(hcd);
+ pm_runtime_put_sync(dev->parent);
err_io:
return ret;
@@ -252,7 +246,7 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
struct usb_hcd *hcd = dev_get_drvdata(dev);
usb_remove_hcd(hcd);
- omap_usbhs_disable(dev);
+ pm_runtime_put_sync(dev->parent);
usb_put_hcd(hcd);
return 0;
}
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 6048f2f..6ce50de 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <plat/usb.h>
+#include <linux/pm_runtime.h>
/*-------------------------------------------------------------------------*/
@@ -172,11 +173,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
hcd->rsrc_len = resource_size(res);
hcd->regs = regs;
- ret = omap_usbhs_enable(dev);
- if (ret) {
- dev_dbg(dev, "failed to start ohci\n");
- goto err_end;
- }
+ pm_runtime_get_sync(dev->parent);
ohci_hcd_init(hcd_to_ohci(hcd));
@@ -189,7 +186,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
return 0;
err_add_hcd:
- omap_usbhs_disable(dev);
+ pm_runtime_get_sync(dev->parent);
err_end:
usb_put_hcd(hcd);
@@ -220,9 +217,8 @@ static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev)
iounmap(hcd->regs);
usb_remove_hcd(hcd);
- omap_usbhs_disable(dev);
+ pm_runtime_put_sync(dev->parent);
usb_put_hcd(hcd);
-
return 0;
}
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists