[<prev] [next>] [day] [month] [year] [list]
Message-ID: <CACxGe6tA8E5jC+dW0oXvZE4TCq7V7Z-SCLo7YS5q34L2cYaAEw@mail.gmail.com>
Date: Tue, 5 Jul 2011 11:44:47 -0600
From: Grant Likely <grant.likely@...retlab.ca>
To: Shawn Guo <shawn.guo@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org,
devicetree-discuss@...ts.ozlabs.org, patches@...aro.org,
Sascha Hauer <s.hauer@...gutronix.de>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/3] gpio/mxc: get rid of the uses of cpu_is_mx()
On Tue, Jul 5, 2011 at 9:19 AM, Shawn Guo <shawn.guo@...aro.org> wrote:
> The patch removes all the uses of cpu_is_mx(). Instead, it utilizes
> platform_device_id to distinguish the gpio differences among SoCs.
>
> Signed-off-by: Shawn Guo <shawn.guo@...aro.org>
> Cc: Grant Likely <grant.likely@...retlab.ca>
> Cc: Sascha Hauer <s.hauer@...gutronix.de>
Don't forget to cc linux-kernel on GPIO patches.
Acked-by: Grant Likely <grant.likely@...retlab.ca>
> ---
> arch/arm/mach-imx/mm-imx1.c | 8 +-
> arch/arm/mach-imx/mm-imx21.c | 12 +-
> arch/arm/mach-imx/mm-imx25.c | 8 +-
> arch/arm/mach-imx/mm-imx27.c | 12 +-
> arch/arm/mach-imx/mm-imx31.c | 6 +-
> arch/arm/mach-imx/mm-imx35.c | 6 +-
> arch/arm/mach-mx5/mm-mx50.c | 12 +-
> arch/arm/mach-mx5/mm.c | 22 ++--
> arch/arm/plat-mxc/devices/platform-gpio-mxc.c | 4 +-
> arch/arm/plat-mxc/include/mach/common.h | 2 +-
> drivers/gpio/gpio-mxc.c | 131 +++++++++++++++++++++----
> 11 files changed, 159 insertions(+), 64 deletions(-)
>
> diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
> index f2a6566..2bded59 100644
> --- a/arch/arm/mach-imx/mm-imx1.c
> +++ b/arch/arm/mach-imx/mm-imx1.c
> @@ -50,12 +50,12 @@ void __init mx1_init_irq(void)
>
> void __init imx1_soc_init(void)
> {
> - mxc_register_gpio(0, MX1_GPIO1_BASE_ADDR, SZ_256,
> + mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
> MX1_GPIO_INT_PORTA, 0);
> - mxc_register_gpio(1, MX1_GPIO2_BASE_ADDR, SZ_256,
> + mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,
> MX1_GPIO_INT_PORTB, 0);
> - mxc_register_gpio(2, MX1_GPIO3_BASE_ADDR, SZ_256,
> + mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256,
> MX1_GPIO_INT_PORTC, 0);
> - mxc_register_gpio(3, MX1_GPIO4_BASE_ADDR, SZ_256,
> + mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
> MX1_GPIO_INT_PORTD, 0);
> }
> diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
> index 4f32a8a..d02e20d 100644
> --- a/arch/arm/mach-imx/mm-imx21.c
> +++ b/arch/arm/mach-imx/mm-imx21.c
> @@ -77,12 +77,12 @@ void __init mx21_init_irq(void)
>
> void __init imx21_soc_init(void)
> {
> - mxc_register_gpio(0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
> - mxc_register_gpio(1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
> - mxc_register_gpio(2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
> - mxc_register_gpio(3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
> - mxc_register_gpio(4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
> - mxc_register_gpio(5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
>
> imx_add_imx_dma();
> }
> diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
> index 1e0c956..65099e6 100644
> --- a/arch/arm/mach-imx/mm-imx25.c
> +++ b/arch/arm/mach-imx/mm-imx25.c
> @@ -86,10 +86,10 @@ static struct sdma_platform_data imx25_sdma_pdata __initdata = {
>
> void __init imx25_soc_init(void)
> {
> - mxc_register_gpio(0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
> - mxc_register_gpio(1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
> - mxc_register_gpio(2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
> - mxc_register_gpio(3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
> + mxc_register_gpio("imx25-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
> + mxc_register_gpio("imx25-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
> + mxc_register_gpio("imx25-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
> + mxc_register_gpio("imx25-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
>
> imx_add_imx_sdma(MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
> }
> diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
> index 944e02d..5a62969 100644
> --- a/arch/arm/mach-imx/mm-imx27.c
> +++ b/arch/arm/mach-imx/mm-imx27.c
> @@ -77,12 +77,12 @@ void __init mx27_init_irq(void)
>
> void __init imx27_soc_init(void)
> {
> - mxc_register_gpio(0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> - mxc_register_gpio(1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> - mxc_register_gpio(2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> - mxc_register_gpio(3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> - mxc_register_gpio(4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> - mxc_register_gpio(5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
> + mxc_register_gpio("imx2-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
>
> imx_add_imx_dma();
> }
> diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
> index a1ff96f..7017c4a 100644
> --- a/arch/arm/mach-imx/mm-imx31.c
> +++ b/arch/arm/mach-imx/mm-imx31.c
> @@ -78,9 +78,9 @@ void __init imx31_soc_init(void)
> {
> int to_version = mx31_revision() >> 4;
>
> - mxc_register_gpio(0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
> - mxc_register_gpio(1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
> - mxc_register_gpio(2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
> + mxc_register_gpio("imx-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
> + mxc_register_gpio("imx-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
> + mxc_register_gpio("imx-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
>
> if (to_version == 1) {
> strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
> diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
> index da530ca..568a5c6 100644
> --- a/arch/arm/mach-imx/mm-imx35.c
> +++ b/arch/arm/mach-imx/mm-imx35.c
> @@ -95,9 +95,9 @@ void __init imx35_soc_init(void)
> {
> int to_version = mx35_revision() >> 4;
>
> - mxc_register_gpio(0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
> - mxc_register_gpio(1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
> - mxc_register_gpio(2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
> + mxc_register_gpio("imx-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
> + mxc_register_gpio("imx-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
> + mxc_register_gpio("imx-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
>
> if (to_version == 1) {
> strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
> diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
> index 28c3f60..39e4a17 100644
> --- a/arch/arm/mach-mx5/mm-mx50.c
> +++ b/arch/arm/mach-mx5/mm-mx50.c
> @@ -62,10 +62,10 @@ void __init mx50_init_irq(void)
>
> void __init imx50_soc_init(void)
> {
> - mxc_register_gpio(0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
> - mxc_register_gpio(1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
> - mxc_register_gpio(2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
> - mxc_register_gpio(3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
> - mxc_register_gpio(4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
> - mxc_register_gpio(5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
> + mxc_register_gpio("imx-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
> + mxc_register_gpio("imx-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
> + mxc_register_gpio("imx-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
> + mxc_register_gpio("imx-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
> + mxc_register_gpio("imx-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
> + mxc_register_gpio("imx-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
> }
> diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
> index 1b7059f..1444140 100644
> --- a/arch/arm/mach-mx5/mm.c
> +++ b/arch/arm/mach-mx5/mm.c
> @@ -142,23 +142,23 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = {
>
> void __init imx51_soc_init(void)
> {
> - mxc_register_gpio(0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
> - mxc_register_gpio(1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
> - mxc_register_gpio(2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
> - mxc_register_gpio(3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
> + mxc_register_gpio("imx-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
> + mxc_register_gpio("imx-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
> + mxc_register_gpio("imx-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
> + mxc_register_gpio("imx-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
>
> imx_add_imx_sdma(MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
> }
>
> void __init imx53_soc_init(void)
> {
> - mxc_register_gpio(0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
> - mxc_register_gpio(1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
> - mxc_register_gpio(2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
> - mxc_register_gpio(3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
> - mxc_register_gpio(4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
> - mxc_register_gpio(5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
> - mxc_register_gpio(6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
> + mxc_register_gpio("imx-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
> + mxc_register_gpio("imx-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
> + mxc_register_gpio("imx-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
> + mxc_register_gpio("imx-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
> + mxc_register_gpio("imx-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
> + mxc_register_gpio("imx-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
> + mxc_register_gpio("imx-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
>
> imx_add_imx_sdma(MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
> }
> diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
> index cf1b7fd..a7919a2 100644
> --- a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
> +++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
> @@ -8,7 +8,7 @@
> */
> #include <mach/devices-common.h>
>
> -struct platform_device *__init mxc_register_gpio(int id,
> +struct platform_device *__init mxc_register_gpio(char *name, int id,
> resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
> {
> struct resource res[] = {
> @@ -28,5 +28,5 @@ struct platform_device *__init mxc_register_gpio(int id,
> };
>
> return platform_device_register_resndata(&mxc_aips_bus,
> - "gpio-mxc", id, res, ARRAY_SIZE(res), NULL, 0);
> + name, id, res, ARRAY_SIZE(res), NULL, 0);
> }
> diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
> index 91fa263..4e3d978 100644
> --- a/arch/arm/plat-mxc/include/mach/common.h
> +++ b/arch/arm/plat-mxc/include/mach/common.h
> @@ -64,7 +64,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
> unsigned long ckih1, unsigned long ckih2);
> extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
> unsigned long ckih1, unsigned long ckih2);
> -extern struct platform_device *mxc_register_gpio(int id,
> +extern struct platform_device *mxc_register_gpio(char *name, int id,
> resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
> extern int mxc_register_device(struct platform_device *pdev, void *data);
> extern void mxc_set_cpu_type(unsigned int type);
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index 8241680..4875690 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -27,9 +27,29 @@
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/basic_mmio_gpio.h>
> -#include <mach/hardware.h>
> #include <asm-generic/bug.h>
>
> +enum mxc_gpio_hwtype {
> + IMX1_GPIO = 1,
> + IMX2_GPIO,
> + IMX_GPIO,
> +};
> +
> +/* device type dependent stuff */
> +struct mxc_gpio_hwdata {
> + unsigned dr_reg;
> + unsigned gdir_reg;
> + unsigned psr_reg;
> + unsigned icr1_reg;
> + unsigned icr2_reg;
> + unsigned imr_reg;
> + unsigned isr_reg;
> + unsigned low_level;
> + unsigned high_level;
> + unsigned rise_edge;
> + unsigned fall_edge;
> +};
> +
> struct mxc_gpio_port {
> struct list_head node;
> void __iomem *base;
> @@ -40,6 +60,72 @@ struct mxc_gpio_port {
> u32 both_edges;
> };
>
> +static struct mxc_gpio_hwdata imx1_imx2_gpio_hwdata = {
> + .dr_reg = 0x1c,
> + .gdir_reg = 0x00,
> + .psr_reg = 0x24,
> + .icr1_reg = 0x28,
> + .icr2_reg = 0x2c,
> + .imr_reg = 0x30,
> + .isr_reg = 0x34,
> + .low_level = 0x03,
> + .high_level = 0x02,
> + .rise_edge = 0x00,
> + .fall_edge = 0x01,
> +};
> +
> +static struct mxc_gpio_hwdata imx_gpio_hwdata = {
> + .dr_reg = 0x00,
> + .gdir_reg = 0x04,
> + .psr_reg = 0x08,
> + .icr1_reg = 0x0c,
> + .icr2_reg = 0x10,
> + .imr_reg = 0x14,
> + .isr_reg = 0x18,
> + .low_level = 0x00,
> + .high_level = 0x01,
> + .rise_edge = 0x02,
> + .fall_edge = 0x03,
> +};
> +
> +static enum mxc_gpio_hwtype mxc_gpio_hwtype;
> +static struct mxc_gpio_hwdata *mxc_gpio_hwdata;
> +
> +#define GPIO_DR (mxc_gpio_hwdata->dr_reg)
> +#define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg)
> +#define GPIO_PSR (mxc_gpio_hwdata->psr_reg)
> +#define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg)
> +#define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg)
> +#define GPIO_IMR (mxc_gpio_hwdata->imr_reg)
> +#define GPIO_ISR (mxc_gpio_hwdata->isr_reg)
> +
> +#define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level)
> +#define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level)
> +#define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge)
> +#define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge)
> +#define GPIO_INT_NONE 0x4
> +
> +static struct platform_device_id mxc_gpio_devtype[] = {
> + {
> + .name = "imx1-gpio",
> + .driver_data = IMX1_GPIO,
> + }, {
> + .name = "imx21-gpio",
> + .driver_data = IMX2_GPIO,
> + }, {
> + .name = "imx25-gpio",
> + .driver_data = IMX_GPIO,
> + }, {
> + .name = "imx27-gpio",
> + .driver_data = IMX2_GPIO,
> + }, {
> + .name = "imx-gpio",
> + .driver_data = IMX_GPIO,
> + }, {
> + /* sentinel */
> + }
> +};
> +
> /*
> * MX2 has one interrupt *for all* gpio ports. The list is used
> * to save the references to all ports, so that mx2_gpio_irq_handler
> @@ -47,22 +133,6 @@ struct mxc_gpio_port {
> */
> static LIST_HEAD(mxc_gpio_ports);
>
> -#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2())
> -
> -#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00)
> -#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04)
> -#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08)
> -#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C)
> -#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10)
> -#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14)
> -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
> -
> -#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0)
> -#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1)
> -#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2)
> -#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3)
> -#define GPIO_INT_NONE 0x4
> -
> /* Note: This driver assumes 32 GPIOs are handled in one register */
>
> static int gpio_set_irq_type(struct irq_data *d, u32 type)
> @@ -236,6 +306,28 @@ static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port)
> IRQ_NOREQUEST, 0);
> }
>
> +static void __devinit mxc_gpio_get_hw(struct platform_device *pdev)
> +{
> + enum mxc_gpio_hwtype hwtype = pdev->id_entry->driver_data;
> +
> + if (mxc_gpio_hwtype) {
> + /*
> + * The driver works with a reasonable presupposition,
> + * that is all gpio ports must be the same type when
> + * running on one soc.
> + */
> + BUG_ON(mxc_gpio_hwtype != hwtype);
> + return;
> + }
> +
> + if (hwtype == IMX1_GPIO || hwtype == IMX2_GPIO)
> + mxc_gpio_hwdata = &imx1_imx2_gpio_hwdata;
> + else
> + mxc_gpio_hwdata = &imx_gpio_hwdata;
> +
> + mxc_gpio_hwtype = hwtype;
> +}
> +
> static int __devinit mxc_gpio_probe(struct platform_device *pdev)
> {
> struct mxc_gpio_port *port;
> @@ -243,6 +335,8 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
> static int once = 0;
> int err;
>
> + mxc_gpio_get_hw(pdev);
> +
> port = kzalloc(sizeof(struct mxc_gpio_port), GFP_KERNEL);
> if (!port)
> return -ENOMEM;
> @@ -276,7 +370,7 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
> writel(0, port->base + GPIO_IMR);
> writel(~0, port->base + GPIO_ISR);
>
> - if (cpu_is_mx2()) {
> + if (mxc_gpio_hwtype == IMX2_GPIO) {
> /* setup one handler for all GPIO interrupts */
> if (!once) {
> irq_set_chained_handler(port->irq,
> @@ -334,6 +428,7 @@ static struct platform_driver mxc_gpio_driver = {
> .owner = THIS_MODULE,
> },
> .probe = mxc_gpio_probe,
> + .id_table = mxc_gpio_devtype,
> };
>
> static int __init gpio_mxc_init(void)
> --
> 1.7.4.1
>
>
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists