| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <000e01cc3d2f$eca5d530$c5f17f90$%kim@samsung.com>
Date: Fri, 08 Jul 2011 14:28:34 +0900
From: Kukjin Kim <kgene.kim@...sung.com>
To: 'Chanwoo Choi' <cw00.choi@...sung.com>,
"'Rafael J. Wysocki'" <rjw@...k.pl>
Cc: 'Kyungmin Park' <kyungmin.park@...sung.com>,
'MyungJoo Ham' <myungjoo.ham@...sung.com>,
'Sylwester Nawrocki' <snjw23@...il.com>,
linux-pm@...ts.linux-foundation.org,
'linux-samsung-soc' <linux-samsung-soc@...r.kernel.org>,
'linux-kernel' <linux-kernel@...r.kernel.org>
Subject: RE: [PATCHv3] ARM: EXYNOS4: Support for generic I/O power domains on
EXYNOS4210
Chanwoo Choi wrote:
>
> Use the generic power domains support to implement support for
> power domain on EXYNOS4210.
>
> I refer to the following patch to implement what configure
> the clock-gating control register for block to turn off/on:
> http://git.infradead.org/users/kmpark/linux-2.6-
> samsung/commit/39a81876d034dcbdc2a4c4c4b847b3b49e38870c
>
I think, this should be moved under "---"
> This patch is based on following "pm-domains" branch.
> http://git.kernel.org/?p=linux/kernel/git/rafael/suspend-
> 2.6.git;a=shortlog;h=refs/heads/pm-domains
>
Same as above.
> Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
> Signed-off-by: Myungjoo Ham <myungjoo.ham@...sung.com>
> Signed-off-by: Kyungmin.park <kyungmin.park@...sung.com>
Kyungmin Park?
> ---
> arch/arm/mach-exynos4/Kconfig | 1 +
> arch/arm/mach-exynos4/Makefile | 1 +
> arch/arm/mach-exynos4/include/mach/pm-exynos4210.h | 53 ++++++
> arch/arm/mach-exynos4/include/mach/regs-clock.h | 8 +
> arch/arm/mach-exynos4/mach-nuri.c | 18 ++
> arch/arm/mach-exynos4/pm-exynos4210.c | 184
> ++++++++++++++++++++
> 6 files changed, 265 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-exynos4/include/mach/pm-exynos4210.h
> create mode 100644 arch/arm/mach-exynos4/pm-exynos4210.c
>
> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
> index 1435fc3..c5357b5 100644
> --- a/arch/arm/mach-exynos4/Kconfig
> +++ b/arch/arm/mach-exynos4/Kconfig
> @@ -183,6 +183,7 @@ config MACH_NURI
> select EXYNOS4_SETUP_SDHCI
> select EXYNOS4_SETUP_USB_PHY
> select SAMSUNG_DEV_PWM
> + select PM_GENERIC_DOMAINS if PM
Do you _really_ think this should be under MACH_NURI?
> help
> Machine support for Samsung Mobile NURI Board.
>
> diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
> index 60fe5ec..0e9461f 100644
> --- a/arch/arm/mach-exynos4/Makefile
> +++ b/arch/arm/mach-exynos4/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-
> eint.o dma.o
> obj-$(CONFIG_PM) += pm.o sleep.o
> obj-$(CONFIG_CPU_FREQ) += cpufreq.o
> obj-$(CONFIG_CPU_IDLE) += cpuidle.o
> +obj-$(CONFIG_CPU_EXYNOS4210) += pm-exynos4210.o
>
> obj-$(CONFIG_SMP) += platsmp.o headsmp.o
>
> diff --git a/arch/arm/mach-exynos4/include/mach/pm-exynos4210.h
> b/arch/arm/mach-exynos4/include/mach/pm-exynos4210.h
> new file mode 100644
> index 0000000..ab09034
> --- /dev/null
> +++ b/arch/arm/mach-exynos4/include/mach/pm-exynos4210.h
> @@ -0,0 +1,53 @@
> +/* linux/arch/arm/mach-exynos4/include/mach/pm-exynos4.h
According to your file name, should be linux/arch/arm/mach-exynos4/include/mach/pm-exynos4210.h ?
> + *
> + * Exynos4 Power management support
Is this for EXYNOS4 or only EXYNOS4210?
> + *
> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef PM_EXYNOS4210_H
> +#define PM_EXYNOS4210_H
> +
> +#include <linux/pm_domain.h>
> +#include <plat/pd.h>
> +
> +struct platform_device;
> +
> +struct exynos4210_pm_domain {
> + struct generic_pm_domain genpd;
> +
> + const char *name;
> + void __iomem *base;
> + u32 mask;
> + int boot_on;
> +};
> +
> +static inline struct exynos4210_pm_domain *to_exynos4210_pd(
> + struct generic_pm_domain *pd)
> +{
> + return container_of(pd, struct exynos4210_pm_domain, genpd);
> +}
> +
> +#ifdef CONFIG_PM
> +extern struct exynos4210_pm_domain exynos4210_pd_mfc;
> +extern struct exynos4210_pm_domain exynos4210_pd_g3d;
> +extern struct exynos4210_pm_domain exynos4210_pd_lcd0;
> +extern struct exynos4210_pm_domain exynos4210_pd_lcd1;
> +extern struct exynos4210_pm_domain exynos4210_pd_tv;
> +extern struct exynos4210_pm_domain exynos4210_pd_cam;
> +extern struct exynos4210_pm_domain exynos4210_pd_gps;
> +
> +extern void exynos4210_init_pm_domain(struct exynos4210_pm_domain
> *exynos4210_pd);
> +extern void exynos4210_add_device_to_domain(struct exynos4210_pm_domain
> *exynos4210_pd,
> + struct platform_device *pdev);
> +#else
> +#define exynos4210_init_pm_domain(pd) do { } while(0)
> +#define exynos4_add_device_to_domain(pd, pdev) do { } while(0)
> +#endif /* CONFIG_PM */
> +
> +#endif /* PM_EXYNOS4210_H */
> diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-
> exynos4/include/mach/regs-clock.h
> index 6e311c1..bc0fda9 100644
> --- a/arch/arm/mach-exynos4/include/mach/regs-clock.h
> +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h
> @@ -171,6 +171,14 @@
> #define S5P_CLKDIV_BUS_GPLR_SHIFT (4)
> #define S5P_CLKDIV_BUS_GPLR_MASK (0x7 <<
> S5P_CLKDIV_BUS_GPLR_SHIFT)
>
> +#define S5P_CLKGATE_BLOCK_CAM (1<<0)
The blank should be added around "<<" like (1 << 0)
> +#define S5P_CLKGATE_BLOCK_TV (1<<1)
> +#define S5P_CLKGATE_BLOCK_MFC (1<<2)
> +#define S5P_CLKGATE_BLOCK_G3D (1<<3)
> +#define S5P_CLKGATE_BLOCK_LCD0 (1<<4)
> +#define S5P_CLKGATE_BLOCK_LCD1 (1<<5)
> +#define S5P_CLKGATE_BLOCK_GPS (1<<7)
Same...
> +
> /* Compatibility defines and inclusion */
>
> #include <mach/regs-pmu.h>
Hmm...how about if this is required, just add the inclusion in c file?
Actually, you added above in pm-exynos4210.c...
> diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-
> nuri.c
> index 642702b..816c6f4 100644
> --- a/arch/arm/mach-exynos4/mach-nuri.c
> +++ b/arch/arm/mach-exynos4/mach-nuri.c
> @@ -37,6 +37,7 @@
> #include <plat/iic.h>
>
> #include <mach/map.h>
> +#include <mach/pm-exynos4210.h>
>
> /* Following are default values for UCON, ULCON and UFCON UART registers */
> #define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
> @@ -376,6 +377,21 @@ static struct platform_device *nuri_devices[] __initdata = {
> &nuri_backlight_device,
> };
>
> +static void __init nuri_power_domain_init(void)
> +{
> + /* Initialize power-domain */
> + exynos4210_init_pm_domain(&exynos4210_pd_mfc);
> + exynos4210_init_pm_domain(&exynos4210_pd_g3d);
> + exynos4210_init_pm_domain(&exynos4210_pd_lcd0);
> + exynos4210_init_pm_domain(&exynos4210_pd_lcd1);
> + exynos4210_init_pm_domain(&exynos4210_pd_tv);
> + exynos4210_init_pm_domain(&exynos4210_pd_cam);
> + exynos4210_init_pm_domain(&exynos4210_pd_gps);
Hmm, is this needed only on NURI?
> +
> + /* Add device to power-domain */
> + exynos4210_add_device_to_domain(&exynos4210_pd_lcd0,
> &nuri_lcd_device);
> +}
> +
> static void __init nuri_map_io(void)
> {
> s5p_init_io(NULL, 0, S5P_VA_CHIPID);
> @@ -398,6 +414,8 @@ static void __init nuri_machine_init(void)
>
> /* Last */
> platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
> +
> + nuri_power_domain_init();
> }
>
> MACHINE_START(NURI, "NURI")
> diff --git a/arch/arm/mach-exynos4/pm-exynos4210.c b/arch/arm/mach-
> exynos4/pm-exynos4210.c
> new file mode 100644
> index 0000000..f44dcef
> --- /dev/null
> +++ b/arch/arm/mach-exynos4/pm-exynos4210.c
> @@ -0,0 +1,184 @@
> +/* linux/arch/arm/mach-exynos4/pm-exynos4210.c
> + *
> + * Exynos4210 Power management support
> + *
> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/pm.h>
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/slab.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/io.h>
> +
> +#include <mach/regs-pmu.h>
As I said, so no need to add this inclusion in <mach/regs-clock.h>
> +#include <mach/regs-clock.h>
> +#include <mach/pm-exynos4210.h>
> +
> +#ifdef CONFIG_PM
> +static DEFINE_SPINLOCK(clkgate_block_lock);
> +
> +static int pd_power_down(struct generic_pm_domain *genpd)
> +{
> + struct exynos4210_pm_domain *exynos4210_pd =
> to_exynos4210_pd(genpd);
> + u32 timeout;
> +
> + /* Disable the power of power-domain */
> + __raw_writel(0, exynos4210_pd->base);
> +
> + /* Wait max 1ms */
> + timeout = 10;
> + while (__raw_readl(exynos4210_pd->base + 0x4) &
> S5P_INT_LOCAL_PWR_EN) {
> + if (timeout == 0) {
> + printk(KERN_ERR "Power domain %s disable failed.\n",
> + exynos4210_pd->name);
> + return -ETIMEDOUT;
> + }
> + timeout--;
> + udelay(100);
> + }
> +
> + /* Configure the clock-gating control register for block to turn off */
> + if (exynos4210_pd->mask) {
> + unsigned long flags;
> + u32 reg;
> +
> + spin_lock_irqsave(&clkgate_block_lock, flags);
> + reg = __raw_readl(S5P_CLKGATE_BLOCK);
> + reg &= ~exynos4210_pd->mask;
> + __raw_writel(reg, S5P_CLKGATE_BLOCK);
> + spin_unlock_irqrestore(&clkgate_block_lock, flags);
> + }
> +
> + return 0;
> +}
> +
> +static int pd_power_up(struct generic_pm_domain *genpd)
> +{
> + struct exynos4210_pm_domain *exynos4210_pd =
> to_exynos4210_pd(genpd);
> + u32 timeout;
> +
> + /* Enable power domain */
> + __raw_writel(S5P_INT_LOCAL_PWR_EN, exynos4210_pd->base);
> +
> + /* Wait max 1ms */
> + timeout = 10;
> + while ((__raw_readl(exynos4210_pd->base + 0x4) &
> S5P_INT_LOCAL_PWR_EN)
> + != S5P_INT_LOCAL_PWR_EN) {
> + if (timeout == 0) {
> + printk(KERN_ERR "Power domain %s enable failed.\n",
> + exynos4210_pd->name);
> + return -ETIMEDOUT;
> + }
> + timeout--;
> + udelay(100);
> + }
> +
> + /* Configure the clock-gating control register for block to turn on */
> + if (exynos4210_pd->mask) {
> + unsigned long flags;
> + u32 reg;
> +
> + spin_lock_irqsave(&clkgate_block_lock, flags);
> + reg = __raw_readl(S5P_CLKGATE_BLOCK);
> + reg |= exynos4210_pd->mask;
> + __raw_writel(reg, S5P_CLKGATE_BLOCK);
> + spin_unlock_irqrestore(&clkgate_block_lock, flags);
> + }
> +
> + return 0;
> +}
Would be better if you could add some common function for pd_power_up and _down...
I wonder why we need to add this for handling power domain not update current pd.
As you know, they are having same/similar purpose and functions...
> +
> +static bool pd_active_wakeup(struct device *dev)
> +{
> + return true;
> +}
> +
> +void exynos4210_init_pm_domain(struct exynos4210_pm_domain
> *exynos4210_pd)
> +{
> + struct generic_pm_domain *genpd;
> +
> + if (!exynos4210_pd)
> + return;
> +
> + genpd = &exynos4210_pd->genpd;
> +
> + pm_genpd_init(genpd, NULL, false);
> + genpd->stop_device = pm_clk_suspend;
> + genpd->start_device = pm_clk_resume;
> + genpd->active_wakeup = pd_active_wakeup;
> + genpd->power_off = pd_power_down;
> + genpd->power_on = pd_power_up;
> +
> + if (exynos4210_pd->boot_on)
> + pd_power_up(&exynos4210_pd->genpd);
> +}
> +
> +void exynos4210_add_device_to_domain(struct exynos4210_pm_domain
> *exynos4210_pd,
> + struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> +
> + if (exynos4210_pd && pdev)
> + pm_genpd_add_device(&exynos4210_pd->genpd, dev);
> +}
> +
> +struct exynos4210_pm_domain exynos4210_pd_mfc = {
> + .name = "PD_MFC",
> + .base = S5P_PMU_MFC_CONF,
> + .mask = S5P_CLKGATE_BLOCK_MFC,
> + .boot_on = 0,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_g3d = {
> + .name = "PD_G3D",
> + .base = S5P_PMU_G3D_CONF,
> + .mask = S5P_CLKGATE_BLOCK_G3D,
> + .boot_on = 0,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_lcd0 = {
> + .name = "PD_LCD0",
> + .base = S5P_PMU_LCD0_CONF,
> + .mask = S5P_CLKGATE_BLOCK_LCD0,
> + .boot_on = 1,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_lcd1 = {
> + .name = "PD_LCD1",
> + .base = S5P_PMU_LCD1_CONF,
> + .mask = S5P_CLKGATE_BLOCK_LCD1,
> + .boot_on = 0,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_tv = {
> + .name = "PD_TV",
> + .base = S5P_PMU_TV_CONF,
> + .mask = S5P_CLKGATE_BLOCK_TV,
> + .boot_on = 0,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_cam = {
> + .name = "PD_CAM",
> + .base = S5P_PMU_CAM_CONF,
> + .mask = S5P_CLKGATE_BLOCK_CAM,
> + .boot_on = 0,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_gps = {
> + .name = "PD_GPS",
> + .base = S5P_PMU_GPS_CONF,
> + .mask = S5P_CLKGATE_BLOCK_GPS,
> + .boot_on = 0,
> +};
> +
> +#endif /* CONFIG_PM */
> --
> 1.7.0.4
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@...sung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists