[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1310718332-10438-2-git-send-email-jacmet@sunsite.dk>
Date: Fri, 15 Jul 2011 10:25:31 +0200
From: Peter Korsgaard <jacmet@...site.dk>
To: grant.likely@...retlab.ca, linux-kernel@...r.kernel.org
Cc: Peter Korsgaard <jacmet@...site.dk>
Subject: [PATCHv2 2/3] mcp23s08: isolate spi specific parts
Change spi member of struct mcp23s08 to be a ops-specific opaque data
pointer, and move spi specific knowledge out of mcp23s08_probe_one().
No functional change, but is needed to add i2c support.
Signed-off-by: Peter Korsgaard <jacmet@...site.dk>
---
Changes since v1:
- Adjust according to Grants feedback
- Add mcp23s08_spi_{init,exit} wrappers
drivers/gpio/gpio-mcp23s08.c | 81 +++++++++++++++++++++++++++++------------
1 files changed, 57 insertions(+), 24 deletions(-)
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index ef61234..7b78f94 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -50,7 +50,6 @@ struct mcp23s08_ops {
};
struct mcp23s08 {
- struct spi_device *spi;
u8 addr;
u16 cache[11];
@@ -60,6 +59,7 @@ struct mcp23s08 {
struct gpio_chip chip;
const struct mcp23s08_ops *ops;
+ void *data; /* ops specific data */
};
/* A given spi_device can represent up to eight mcp23sxx chips
@@ -73,6 +73,8 @@ struct mcp23s08_driver_data {
struct mcp23s08 chip[];
};
+#ifdef CONFIG_SPI_MASTER
+
static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg)
{
u8 tx[2], rx[1];
@@ -80,7 +82,7 @@ static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg)
tx[0] = mcp->addr | 0x01;
tx[1] = reg;
- status = spi_write_then_read(mcp->spi, tx, sizeof tx, rx, sizeof rx);
+ status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx);
return (status < 0) ? status : rx[0];
}
@@ -91,7 +93,7 @@ static int mcp23s08_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
tx[0] = mcp->addr;
tx[1] = reg;
tx[2] = val;
- return spi_write_then_read(mcp->spi, tx, sizeof tx, NULL, 0);
+ return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0);
}
static int
@@ -106,7 +108,7 @@ mcp23s08_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
tx[1] = reg;
tmp = (u8 *)vals;
- status = spi_write_then_read(mcp->spi, tx, sizeof tx, tmp, n);
+ status = spi_write_then_read(mcp->data, tx, sizeof tx, tmp, n);
if (status >= 0) {
while (n--)
vals[n] = tmp[n]; /* expand to 16bit */
@@ -121,7 +123,7 @@ static int mcp23s17_read(struct mcp23s08 *mcp, unsigned reg)
tx[0] = mcp->addr | 0x01;
tx[1] = reg << 1;
- status = spi_write_then_read(mcp->spi, tx, sizeof tx, rx, sizeof rx);
+ status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx);
return (status < 0) ? status : (rx[0] | (rx[1] << 8));
}
@@ -133,7 +135,7 @@ static int mcp23s17_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
tx[1] = reg << 1;
tx[2] = val;
tx[3] = val >> 8;
- return spi_write_then_read(mcp->spi, tx, sizeof tx, NULL, 0);
+ return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0);
}
static int
@@ -147,7 +149,7 @@ mcp23s17_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
tx[0] = mcp->addr | 0x01;
tx[1] = reg << 1;
- status = spi_write_then_read(mcp->spi, tx, sizeof tx,
+ status = spi_write_then_read(mcp->data, tx, sizeof tx,
(u8 *)vals, n * 2);
if (status >= 0) {
while (n--)
@@ -169,6 +171,7 @@ static const struct mcp23s08_ops mcp23s17_ops = {
.read_regs = mcp23s17_read_regs,
};
+#endif /* CONFIG_SPI_MASTER */
/*----------------------------------------------------------------------*/
@@ -296,17 +299,16 @@ done:
/*----------------------------------------------------------------------*/
-static int mcp23s08_probe_one(struct spi_device *spi, unsigned addr,
+static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
+ void *data, unsigned addr,
unsigned type, unsigned base, unsigned pullups)
{
- struct mcp23s08_driver_data *data = spi_get_drvdata(spi);
- struct mcp23s08 *mcp = data->mcp[addr];
- int status;
+ int status;
mutex_init(&mcp->lock);
- mcp->spi = spi;
- mcp->addr = 0x40 | (addr << 1);
+ mcp->data = data;
+ mcp->addr = addr;
mcp->chip.direction_input = mcp23s08_direction_input;
mcp->chip.get = mcp23s08_get;
@@ -314,18 +316,29 @@ static int mcp23s08_probe_one(struct spi_device *spi, unsigned addr,
mcp->chip.set = mcp23s08_set;
mcp->chip.dbg_show = mcp23s08_dbg_show;
- if (type == MCP_TYPE_S17) {
- mcp->ops = &mcp23s17_ops;
- mcp->chip.ngpio = 16;
- mcp->chip.label = "mcp23s17";
- } else {
+ switch (type) {
+#ifdef CONFIG_SPI_MASTER
+ case MCP_TYPE_S08:
mcp->ops = &mcp23s08_ops;
mcp->chip.ngpio = 8;
mcp->chip.label = "mcp23s08";
+ break;
+
+ case MCP_TYPE_S17:
+ mcp->ops = &mcp23s17_ops;
+ mcp->chip.ngpio = 16;
+ mcp->chip.label = "mcp23s17";
+ break;
+#endif /* CONFIG_SPI_MASTER */
+
+ default:
+ dev_err(dev, "invalid device type (%d)\n", type);
+ return -EINVAL;
}
+
mcp->chip.base = base;
mcp->chip.can_sleep = 1;
- mcp->chip.dev = &spi->dev;
+ mcp->chip.dev = dev;
mcp->chip.owner = THIS_MODULE;
/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
@@ -371,11 +384,13 @@ static int mcp23s08_probe_one(struct spi_device *spi, unsigned addr,
status = gpiochip_add(&mcp->chip);
fail:
if (status < 0)
- dev_dbg(&spi->dev, "can't setup chip %d, --> %d\n",
- addr, status);
+ dev_dbg(dev, "can't setup chip %d, --> %d\n",
+ addr, status);
return status;
}
+#ifdef CONFIG_SPI_MASTER
+
static int mcp23s08_probe(struct spi_device *spi)
{
struct mcp23s08_platform_data *pdata;
@@ -418,7 +433,8 @@ static int mcp23s08_probe(struct spi_device *spi)
continue;
chips--;
data->mcp[addr] = &data->chip[chips];
- status = mcp23s08_probe_one(spi, addr, type, base,
+ status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi,
+ 0x40 | (addr << 1), type, base,
pdata->chip[addr].pullups);
if (status < 0)
goto fail;
@@ -488,11 +504,28 @@ static struct spi_driver mcp23s08_driver = {
},
};
+static int __init mcp23s08_spi_init(void)
+{
+ return spi_register_driver(&mcp23s08_driver);
+}
+
+static void mcp23s08_spi_exit(void)
+{
+ spi_unregister_driver(&mcp23s08_driver);
+}
+
+#else
+
+static int __init mcp23s08_spi_init(void) { return 0; }
+static void mcp23s08_spi_exit(void) { }
+
+#endif /* CONFIG_SPI_MASTER */
+
/*----------------------------------------------------------------------*/
static int __init mcp23s08_init(void)
{
- return spi_register_driver(&mcp23s08_driver);
+ return mcp23s08_spi_init();
}
/* register after spi postcore initcall and before
* subsys initcalls that may rely on these GPIOs
@@ -501,7 +534,7 @@ subsys_initcall(mcp23s08_init);
static void __exit mcp23s08_exit(void)
{
- spi_unregister_driver(&mcp23s08_driver);
+ mcp23s08_spi_exit();
}
module_exit(mcp23s08_exit);
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists