lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 15 Jul 2011 17:04:27 +0200
From:	Peter Zijlstra <a.p.zijlstra@...llo.nl>
To:	paulmck@...ux.vnet.ibm.com
Cc:	Ed Tomlinson <edt@....ca>, Steven Rostedt <rostedt@...dmis.org>,
	Sergey Senozhatsky <sergey.senozhatsky@...il.com>,
	Ingo Molnar <mingo@...e.hu>,
	Thomas Gleixner <tglx@...utronix.de>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Dipankar Sarma <dipankar@...ibm.com>,
	linux-kernel@...r.kernel.org
Subject: Re: INFO: possible circular locking dependency detected

On Fri, 2011-07-15 at 07:36 -0700, Paul E. McKenney wrote:
> On Fri, Jul 15, 2011 at 03:07:39PM +0200, Peter Zijlstra wrote:
> > On Fri, 2011-07-15 at 05:42 -0700, Paul E. McKenney wrote:
> > > On Fri, Jul 15, 2011 at 01:29:22PM +0200, Peter Zijlstra wrote:
> > > > On Fri, 2011-07-15 at 07:05 -0400, Ed Tomlinson wrote:
> > > > > Jul 14 23:21:18 grover kernel: [  920.659426] -> #1 (rcu_node_level_0){..-...}:
> > > > > Jul 14 23:21:18 grover kernel: [  920.659426]        [<ffffffff8108b7e5>] lock_acquire+0x95/0x140
> > > > > Jul 14 23:21:18 grover kernel: [  920.659426]        [<ffffffff8157808b>] _raw_spin_lock+0x3b/0x50
> > > > > Jul 14 23:21:18 grover kernel: [  920.659426]        [<ffffffff810ba797>] __rcu_read_unlock+0x197/0x2d0
> 
> Yow...  Looks like rcu_read_unlock_special() is being inlined
> into __rcu_read_unlock().

Yeah, *cheer* for gcc being a smarty-pants.

> > > > > Jul 14 23:21:18 grover kernel: [  920.659426]        [<ffffffff8103f2f5>] select_task_rq_fair+0x585/0xa80
> > > > > Jul 14 23:21:18 grover kernel: [  920.659426]        [<ffffffff8104633b>] try_to_wake_up+0x17b/0x360
> > > > > Jul 14 23:21:18 grover kernel: [  920.659426]        [<ffffffff81046575>] wake_up_process+0x15/0x20
> > > > > Jul 14 23:21:18 grover kernel: [  920.659426]        [<ffffffff810528f4>] irq_exit+0xb4/0x100
> 
> OK, so all the above stuff is in the context of an irq handler, right?

yep

> In which case, why didn't the in_irq() check kick us out before we
> had a chance to attempt to acquire any locks?

Because we're in irq_exit(), after decrementing preempt_count, so
in_irq() returns false.

> > > > > Jul 14 23:21:18 grover kernel: [  920.659426]        [<ffffffff8158197e>] smp_apic_timer_interrupt+0x6e/0x99
> > > > > Jul 14 23:21:18 grover kernel: [  920.659426]        [<ffffffff81580c53>] apic_timer_interrupt+0x13/0x20
> > > > > Jul 14 23:21:18 grover kernel: [  920.659426]        [<ffffffff810ba6e9>] __rcu_read_unlock+0xe9/0x2d0 
> > > > > Jul 14 23:21:18 grover kernel: [  920.659426]        [<ffffffff814c20d4>] sock_def_readable+0x94/0xc0
> > > > 
> > > > Ed, are you perchance running with force_irqthreads?
> 
> Ah!  Would that mean that local_irq_save() gets mapped to locking?
> Now -that- could be exciting!  ;-)

Nope, it simply makes the invoke_softirq() call in irq_exit() do an
unconditional wakeup of ksoftirqd/# since there isn't an irq-tail to
speak of.

> > > > Paul, what appears to be happening here is that some rcu_read_unlock()
> > > > gets interrupted, possibly before calling rcu_read_unlock_special(),
> > > > possibly not if the interrupt is itself the timer interrupt.
> > > > 
> > > > Supposing ->rcu_read_unlock_special is set before, any wakeup happening
> > > > from an interrupt hitting __rcu_read_unlock():
> > > > 
> > > > void __rcu_read_unlock(void)
> > > > {
> > > >         struct task_struct *t = current;
> > > >                 
> > > >         barrier();  /* needed if we ever invoke rcu_read_unlock in rcutree.c */
> > > >         --t->rcu_read_lock_nesting;
> > > >         barrier();  /* decrement before load of ->rcu_read_unlock_special */
> > > >         if (t->rcu_read_lock_nesting == 0 &&
> > > >             unlikely(ACCESS_ONCE(t->rcu_read_unlock_special)))
> > > >                 rcu_read_unlock_special(t);
> > > > #ifdef CONFIG_PROVE_LOCKING
> > > >         WARN_ON_ONCE(ACCESS_ONCE(t->rcu_read_lock_nesting) < 0);
> > > > #endif /* #ifdef CONFIG_PROVE_LOCKING */
> > > > }
> > > > 
> > > > After --t->rcu_read_lock_nesting, but before calling
> > > > rcu_read_unlock_special(), will trigger this lock inversion.
> > > > 
> > > > The alternative case, ->rcu_read_unlock_special is not set yet, it can
> > > > be set if the interrupt hitting in that same spot above, is the timer
> > > > interrupt, and the wakeup happens either from the softirq ran from the
> > > > hard IRQ tail, or as I suspect here happens, the wakeup of ksoftirqd/#.
> > 
> > OK, so the latter case cannot happen (rcu_preempt_check_callbacks only
> > sets NEED_QS when rcu_read_lock_nesting), we need two interrupts for
> > this to happen.
> > 
> > rcu_read_lock()
> > 
> >  <IRQ>
> >    |= RCU_READ_UNLOCK_NEED_QS
> > 
> > rcu_read_unlock()
> >   __rcu_read_unlock()
> >    --rcu_read_lock_nesting;
> >      <IRQ>
> > 	ttwu()
> >           rcu_read_lock()
> > 	  rcu_read_unlock()
> > 	    rcu_read_unlock_special()
> > 	      *BANG*
> >    rcu_read_unlock_special()
> 
> The "*BANG*" indicating that the upper-level rcu_read_unlock_special()
> might overwrite the lower-level rcu_read_unlock_special()'s attempt
> to clear RCU_READ_UNLOCK_NEED_QS? 

No, the *BANG* being that we end up calling rcu_read_unlock_special()
while holding scheduler locks, which is BAD(tm).

>  (Which I believe, perhaps
> incorrectly, to be prevented by the fact that all modifications to
> ->rcu_read_unlock_special are carried out with irqs disabled on the
> corresponding CPU, at least given no RCU_BOOST.)  The check for in_irq()
> should prevent the from-irq rcu_read_unlock_special() from attempting
> to acquire any locks.

Right, so in_irq() simply checks a few bits in preempt_count, which we
just cleared due to being in irq_exit().

> Or am I missing the point of your example?

You were ;-)

> On the other points, to the extent that I have analyzed them so far:
> 
> 1.	If the task is preempted after the --rcu_read_lock_nesting,
> 	it won't see it as being in an RCU read-side critical section,
> 	so won't queue it.

Agreed.

> 2.	Of course, the task might have preempted earlier.  In this
> 	case, the RCU_READ_UNLOCK_BLOCKED is already set, so we will be
> 	invoking rcu_read_unlock_special() anyway.

Right, but

> 	If an interrupt happens between the decrement and the call to
> 	rcu_read_unlock_special(), then, yes, the irq handler will also
> 	call rcu_read_unlock_special() if it calls rcu_read_unlock(), but
> 	the check for in_irq() will prevent the irq handler's invocation
> 	of rcu_read_unlock_special() from acquiring any locks.

But in_irq() isn't sufficient for RCU usage after the hardirq ends, see
irq_exit(). Also there's all of softirq to consider, that too can run
and not get caught by in_irq().

> 3.	It is possible that the task is preempted after the
> 	--rcu_read_lock_nesting, in which case the task won't be queued.
> 	Of course the task might already be queued if there was an
> 	earlier preemption during this same RCU read-side critical
> 	section, in which case #2 applies.
> 
> 	In other words, a preemption in __rcu_read_unlock() after the
> 	--rcu_read_lock_nesting has no effect on RCU state: either the
> 	task was already marked RCU_READ_UNLOCK_BLOCKED, or it wasn't.
> 	Either way, rcu_note_context_switch() does not see this task as
> 	being in an RCU read-side critical section.
> 
> So what am I missing here?

 $task			IRQ		SoftIRQ

 rcu_read_lock()

 /* do stuff */

 <preempt> |= UNLOCK_BLOCKED

 rcu_read_unlock()
   --t->rcu_read_lock_nesting

			irq_enter();
			/* do stuff, don't use RCU */
			irq_exit();
			  sub_preempt_count(IRQ_EXIT_OFFSET);
			  invoke_softirq()

					ttwu();
					  spin_lock_irq(&pi->lock)
					  rcu_read_lock();
					  /* do stuff */
					  rcu_read_unlock();
					    rcu_read_unlock_special()
					      rcu_report_exp_rnp()
					        ttwu()
					          spin_lock_irq(&pi->lock) /* deadlock */
					      

   rcu_read_unlock_special(t);

Ed can simply trigger this 'easy' because invoke_softirq() immediately
does a ttwu() of ksoftirqd/# instead of doing the in-place softirq stuff
first, but even without that the above happens.

Something like the below _might_ fix it..

---
 kernel/rcutree_plugin.h |    2 +-
 kernel/softirq.c        |   12 ++++++++++--
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 14dc7dd..373c9c8 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -309,7 +309,7 @@ static void rcu_read_unlock_special(struct task_struct *t)
 	}
 
 	/* Hardware IRQ handlers cannot block. */
-	if (in_irq()) {
+	if (in_irq() || in_serving_softirq()) {
 		local_irq_restore(flags);
 		return;
 	}
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 40cf63d..fca82c3 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -315,16 +315,24 @@ static inline void invoke_softirq(void)
 {
 	if (!force_irqthreads)
 		__do_softirq();
-	else
+	else {
+		__local_bh_disable((unsigned long)__builtin_return_address(0),
+				SOFTIRQ_OFFSET);
 		wakeup_softirqd();
+		__local_bh_enable(SOFTIRQ_OFFSET);
+	}
 }
 #else
 static inline void invoke_softirq(void)
 {
 	if (!force_irqthreads)
 		do_softirq();
-	else
+	else {
+		__local_bh_disable((unsigned long)__builtin_return_address(0),
+				SOFTIRQ_OFFSET);
 		wakeup_softirqd();
+		__local_bh_enable(SOFTIRQ_OFFSET);
+	}
 }
 #endif
 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ