| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 15 Jul 2011 17:35:36 +0100
From: Alan Cox <alan@...rguk.ukuu.org.uk>
To: greg@...ah.com, linux-kernel@...r.kernel.org
Subject: [PATCH 14/15] gma500: resync with Medfield progress
From: Alan Cox <alan@...ux.intel.com>
Signed-off-by: Alan Cox <alan@...ux.intel.com>
---
drivers/staging/gma500/mdfld_dsi_dbi.c | 369 ++++++++---------------
drivers/staging/gma500/mdfld_dsi_dbi.h | 21 -
drivers/staging/gma500/mdfld_dsi_dbi_dpu.h | 3
drivers/staging/gma500/mdfld_dsi_dpi.c | 319 ++++----------------
drivers/staging/gma500/mdfld_dsi_dpi.h | 6
drivers/staging/gma500/mdfld_dsi_output.c | 250 +++++++++-------
drivers/staging/gma500/mdfld_dsi_output.h | 203 -------------
drivers/staging/gma500/mdfld_dsi_pkg_sender.c | 403 +++++++++++++++++++++++++
drivers/staging/gma500/mdfld_dsi_pkg_sender.h | 26 ++
drivers/staging/gma500/mdfld_intel_display.c | 6
drivers/staging/gma500/mdfld_output.c | 8
drivers/staging/gma500/mdfld_output.h | 41 ---
drivers/staging/gma500/mdfld_pyr_cmd.c | 18 -
drivers/staging/gma500/mdfld_tmd_vid.c | 62 ++++
drivers/staging/gma500/mdfld_tpo_cmd.c | 64 +++-
drivers/staging/gma500/mrst_lvds.c | 35 ++
drivers/staging/gma500/psb_drv.h | 7
17 files changed, 917 insertions(+), 924 deletions(-)
diff --git a/drivers/staging/gma500/mdfld_dsi_dbi.c b/drivers/staging/gma500/mdfld_dsi_dbi.c
index 1421f49..06424f9 100644
--- a/drivers/staging/gma500/mdfld_dsi_dbi.c
+++ b/drivers/staging/gma500/mdfld_dsi_dbi.c
@@ -39,29 +39,10 @@ extern int gfxrtdelay;
int enter_dsr;
struct mdfld_dsi_dbi_output *gdbi_output;
extern bool gbgfxsuspended;
+extern int enable_gfx_rtpm;
extern int gfxrtdelay;
-#ifdef CONFIG_GFX_RTPM
-static void psb_runtimepm_wq_handler(struct work_struct *work);
-DECLARE_DELAYED_WORK(rtpm_work, psb_runtimepm_wq_handler);
-
-void psb_runtimepm_wq_handler(struct work_struct *work)
-{
- struct drm_psb_private *dev_priv = gpDrmDevice->dev_private;
-
- if (drm_psb_ospm && !enable_gfx_rtpm) {
- pr_info("Enable GFX runtime_pm\n");
- dev_priv->rpm_enabled = 1;
- enable_gfx_rtpm = 1;
-
- pm_runtime_enable(&gpDrmDevice->pdev->dev);
- pm_runtime_set_active(&gpDrmDevice->pdev->dev);
-
- pm_runtime_allow(&gpDrmDevice->pdev->dev);
- }
-}
-#endif
-
+#define MDFLD_DSR_MAX_IDLE_COUNT 2
/*
* set refreshing area
@@ -80,8 +61,8 @@ int mdfld_dsi_dbi_update_area(struct mdfld_dsi_dbi_output *dbi_output,
return -EINVAL;
}
- /*set column*/
- cmd = set_column_address;
+ /* Set column */
+ cmd = DCS_SET_COLUMN_ADDRESS;
param[0] = x1 >> 8;
param[1] = x1;
param[2] = x2 >> 8;
@@ -98,8 +79,8 @@ int mdfld_dsi_dbi_update_area(struct mdfld_dsi_dbi_output *dbi_output,
goto err_out;
}
- /*set page*/
- cmd = set_page_addr;
+ /* Set page */
+ cmd = DCS_SET_PAGE_ADDRESS;
param[0] = y1 >> 8;
param[1] = y1;
param[2] = y2 >> 8;
@@ -139,56 +120,46 @@ int mdfld_dsi_dbi_update_power(struct mdfld_dsi_dbi_output *dbi_output,
int mode)
{
struct drm_device *dev = dbi_output->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
struct mdfld_dsi_pkg_sender *sender =
mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base);
u8 param = 0;
u32 err = 0;
- if (!dev_priv->dispstatus && mode != DRM_MODE_DPMS_ON) {
- dev_err(dev->dev, "%s: already OFF ignoring\n", __func__);
- return 0;
- }
- if (dev_priv->dispstatus && mode == DRM_MODE_DPMS_ON) {
- dev_err(dev->dev, "%s: already ON ignoring\n", __func__);
- return 0;
- }
-
if (!sender) {
WARN_ON(1);
return -EINVAL;
}
if (mode == DRM_MODE_DPMS_ON) {
- /*exit sleep mode*/
+ /* Exit sleep mode */
err = mdfld_dsi_send_dcs(sender,
- exit_sleep_mode,
+ DCS_EXIT_SLEEP_MODE,
NULL,
0,
CMD_DATA_SRC_SYSTEM_MEM,
MDFLD_DSI_QUEUE_PACKAGE);
if (err) {
dev_err(dev->dev, "DCS 0x%x sent failed\n",
- exit_sleep_mode);
+ DCS_EXIT_SLEEP_MODE);
goto power_err;
}
- /*set display on*/
+ /* Set display on */
err = mdfld_dsi_send_dcs(sender,
- set_display_on,
+ DCS_SET_DISPLAY_ON,
NULL,
0,
CMD_DATA_SRC_SYSTEM_MEM,
MDFLD_DSI_QUEUE_PACKAGE);
if (err) {
dev_err(dev->dev, "DCS 0x%x sent failed\n",
- set_display_on);
+ DCS_SET_DISPLAY_ON);
goto power_err;
}
/* set tear effect on */
err = mdfld_dsi_send_dcs(sender,
- set_tear_on,
+ DCS_SET_TEAR_ON,
¶m,
1,
CMD_DATA_SRC_SYSTEM_MEM,
@@ -203,53 +174,53 @@ int mdfld_dsi_dbi_update_power(struct mdfld_dsi_dbi_output *dbi_output,
* FIXME: remove this later
*/
err = mdfld_dsi_send_dcs(sender,
- write_mem_start,
+ DCS_WRITE_MEM_START,
NULL,
0,
CMD_DATA_SRC_PIPE,
MDFLD_DSI_QUEUE_PACKAGE);
if (err) {
dev_err(dev->dev, "DCS 0x%x sent failed\n",
- set_display_on);
+ DCS_WRITE_MEM_START);
goto power_err;
}
} else {
- /*set tear effect off */
+ /* Set tear effect off */
err = mdfld_dsi_send_dcs(sender,
- set_tear_off,
+ DCS_SET_TEAR_OFF,
NULL,
0,
CMD_DATA_SRC_SYSTEM_MEM,
MDFLD_DSI_QUEUE_PACKAGE);
if (err) {
dev_err(dev->dev, "DCS 0x%x sent failed\n",
- set_tear_off);
+ DCS_SET_TEAR_OFF);
goto power_err;
}
- /*set display off*/
+ /* Turn display off */
err = mdfld_dsi_send_dcs(sender,
- set_display_off,
+ DCS_SET_DISPLAY_OFF,
NULL,
0,
CMD_DATA_SRC_SYSTEM_MEM,
MDFLD_DSI_QUEUE_PACKAGE);
if (err) {
dev_err(dev->dev, "DCS 0x%x sent failed\n",
- set_display_off);
+ DCS_SET_DISPLAY_OFF);
goto power_err;
}
- /*enter sleep mode*/
+ /* Now enter sleep mode */
err = mdfld_dsi_send_dcs(sender,
- enter_sleep_mode,
+ DCS_ENTER_SLEEP_MODE,
NULL,
0,
CMD_DATA_SRC_SYSTEM_MEM,
MDFLD_DSI_QUEUE_PACKAGE);
if (err) {
dev_err(dev->dev, "DCS 0x%x sent failed\n",
- enter_sleep_mode);
+ DCS_ENTER_SLEEP_MODE);
goto power_err;
}
}
@@ -283,7 +254,6 @@ int mdfld_dsi_dbi_send_dcs(struct mdfld_dsi_dbi_output *dbi_output,
return ret;
}
-
/*
* Enter DSR
*/
@@ -299,11 +269,12 @@ void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, int pipe)
u32 pipeconf_reg = PIPEACONF;
u32 dspcntr_reg = DSPACNTR;
- dev_priv->is_in_idle = true;
-
if (!dbi_output)
return;
+ /* FIXME check if can go */
+ dev_priv->is_in_idle = true;
+
gdbi_output = dbi_output;
if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) ||
(psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING))
@@ -319,16 +290,17 @@ void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, int pipe)
dev_err(dev->dev, "hw begin failed\n");
return;
}
- /*disable te interrupts. */
+ /* Disable te interrupts */
mdfld_disable_te(dev, pipe);
- /*disable plane*/
+ /* Disable plane */
reg_val = REG_READ(dspcntr_reg);
if (!(reg_val & DISPLAY_PLANE_ENABLE)) {
REG_WRITE(dspcntr_reg, reg_val & ~DISPLAY_PLANE_ENABLE);
REG_READ(dspcntr_reg);
}
- /*disable pipe*/
+
+ /* Disable pipe */
reg_val = REG_READ(pipeconf_reg);
if (!(reg_val & DISPLAY_PLANE_ENABLE)) {
reg_val &= ~DISPLAY_PLANE_ENABLE;
@@ -338,7 +310,7 @@ void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, int pipe)
mdfldWaitForPipeDisable(dev, pipe);
}
- /*disable DPLL*/
+ /* Disable DPLL */
reg_val = REG_READ(dpll_reg);
if (!(reg_val & DPLL_VCO_ENABLE)) {
reg_val &= ~DPLL_VCO_ENABLE;
@@ -357,10 +329,9 @@ void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, int pipe)
#ifndef CONFIG_MDFLD_DSI_DPU
static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output,
- int pipe, void *p_surfaceAddr, bool check_hw_on_only)
+ int pipe)
{
struct drm_device *dev = dbi_output->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dbi_output->base.base.crtc;
struct psb_intel_crtc *psb_crtc = (crtc) ?
to_psb_intel_crtc(crtc) : NULL;
@@ -368,7 +339,6 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output,
u32 dpll_reg = MRST_DPLL_A;
u32 pipeconf_reg = PIPEACONF;
u32 dspcntr_reg = DSPACNTR;
- u32 dspsurf_reg = DSPASURF;
u32 reg_offset = 0;
/*if mode setting on-going, back off*/
@@ -380,24 +350,17 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output,
dpll_reg = MRST_DPLL_A;
pipeconf_reg = PIPECCONF;
dspcntr_reg = DSPCCNTR;
- dspsurf_reg = DSPCSURF;
reg_offset = MIPIC_REG_OFFSET;
}
- if (check_hw_on_only) {
- if (0/* FIXME!ospm_power_is_hw_on(_DISPLAY_ISLAND)*/) {
- dev_err(dev->dev, "hw begin failed\n");
- return;
- }
- } else if (!gma_power_begin(dev, true)) {
+ if (!gma_power_begin(dev, true)) {
dev_err(dev->dev, "hw begin failed\n");
return;
}
- /*enable DPLL*/
+ /* Enable DPLL */
reg_val = REG_READ(dpll_reg);
if (!(reg_val & DPLL_VCO_ENABLE)) {
-
if (reg_val & MDFLD_PWR_GATE_EN) {
reg_val &= ~MDFLD_PWR_GATE_EN;
REG_WRITE(dpll_reg, reg_val);
@@ -415,7 +378,7 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output,
cpu_relax();
}
- /*enable pipe*/
+ /* Enable pipe */
reg_val = REG_READ(pipeconf_reg);
if (!(reg_val & PIPEACONF_ENABLE)) {
reg_val |= PIPEACONF_ENABLE;
@@ -425,7 +388,7 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output,
mdfldWaitForPipeEnable(dev, pipe);
}
- /*enable plane*/
+ /* Enable plane */
reg_val = REG_READ(dspcntr_reg);
if (!(reg_val & DISPLAY_PLANE_ENABLE)) {
reg_val |= DISPLAY_PLANE_ENABLE;
@@ -434,15 +397,9 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output,
udelay(500);
}
- /* update the surface base address. */
- if (p_surfaceAddr)
- REG_WRITE(dspsurf_reg, *((u32 *)p_surfaceAddr));
-
- if (!check_hw_on_only)
- gma_power_end(dev);
-
- /*enable TE interrupt on this pipe*/
+ /* Enable TE interrupt on this pipe */
mdfld_enable_te(dev, pipe);
+ gma_power_end(dev);
/*clean IN_DSR flag*/
dbi_output->mode_flags &= ~MODE_SETTING_IN_DSR;
@@ -451,33 +408,33 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output,
/*
* Exit from DSR
*/
-void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src,
- void *p_surfaceAddr, bool check_hw_on_only)
+void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info;
struct mdfld_dsi_dbi_output **dbi_output;
int i;
+ int pipe;
+ /* FIXME can go ? */
dev_priv->is_in_idle = false;
dbi_output = dsr_info->dbi_outputs;
#ifdef CONFIG_PM_RUNTIME
if (!enable_gfx_rtpm) {
/* pm_runtime_allow(&gpDrmDevice->pdev->dev); */
-/* schedule_delayed_work(&rtpm_work, 120 * 1000); */
+/* schedule_delayed_work(&rtpm_work, 30 * 1000);*/ /* FIXME: HZ ? */
}
#endif
- /*for each output, exit dsr*/
+ /* For each output, exit dsr */
for (i = 0; i < dsr_info->dbi_output_num; i++) {
- /*if panel has been turned off, skip*/
- if (!dbi_output[i]->dbi_panel_on)
+ /* If panel has been turned off, skip */
+ if (!dbi_output[i] || !dbi_output[i]->dbi_panel_on)
continue;
- if (dbi_output[i]->mode_flags & MODE_SETTING_IN_DSR) {
- enter_dsr = 0;
- mdfld_dbi_output_exit_dsr(dbi_output[i], dbi_output[i]->channel_num ? 2 : 0, p_surfaceAddr, check_hw_on_only);
- }
+ pipe = dbi_output[i]->channel_num ? 2 : 0;
+ enter_dsr = 0;
+ mdfld_dbi_output_exit_dsr(dbi_output[i], pipe);
}
dev_priv->dsr_fb_update |= update_src;
}
@@ -496,7 +453,7 @@ static bool mdfld_dbi_is_in_dsr(struct drm_device *dev)
return true;
}
-/* Perodically update dbi panel */
+/* Periodically update dbi panel */
void mdfld_dbi_update_panel(struct drm_device *dev, int pipe)
{
struct drm_psb_private *dev_priv = dev->dev_private;
@@ -504,8 +461,8 @@ void mdfld_dbi_update_panel(struct drm_device *dev, int pipe)
struct mdfld_dsi_dbi_output **dbi_outputs;
struct mdfld_dsi_dbi_output *dbi_output;
int i;
- int enter_dsr = 0;
- u32 damage_mask = 0;
+ int can_enter_dsr = 0;
+ u32 damage_mask;
dbi_outputs = dsr_info->dbi_outputs;
dbi_output = pipe ? dbi_outputs[1] : dbi_outputs[0];
@@ -514,13 +471,13 @@ void mdfld_dbi_update_panel(struct drm_device *dev, int pipe)
return;
if (pipe == 0)
- damage_mask = dev_priv->dsr_fb_update & (MDFLD_DSR_DAMAGE_MASK_0);
+ damage_mask = dev_priv->dsr_fb_update & MDFLD_DSR_DAMAGE_MASK_0;
else if (pipe == 2)
- damage_mask = dev_priv->dsr_fb_update & (MDFLD_DSR_DAMAGE_MASK_2);
+ damage_mask = dev_priv->dsr_fb_update & MDFLD_DSR_DAMAGE_MASK_2;
else
return;
- /*if FB is damaged and panel is on update on-panel FB*/
+ /* If FB is damaged and panel is on update on-panel FB */
if (damage_mask && dbi_output->dbi_panel_on) {
dbi_output->dsr_fb_update_done = false;
@@ -538,11 +495,24 @@ void mdfld_dbi_update_panel(struct drm_device *dev, int pipe)
dbi_output->dsr_idle_count++;
}
- /*try to enter DSR*/
- if (dbi_outputs[0]->dsr_idle_count > 1
- && dbi_outputs[1]->dsr_idle_count > 1) {
+ switch (dsr_info->dbi_output_num) {
+ case 1:
+ if (dbi_output->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT)
+ can_enter_dsr = 1;
+ break;
+ case 2:
+ if (dbi_outputs[0]->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT
+ && dbi_outputs[1]->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT)
+ can_enter_dsr = 1;
+ break;
+ default:
+ DRM_ERROR("Wrong DBI output number\n");
+ }
+
+ /* Try to enter DSR */
+ if (can_enter_dsr) {
for (i = 0; i < dsr_info->dbi_output_num; i++) {
- if (!mdfld_dbi_is_in_dsr(dev) &&
+ if (!mdfld_dbi_is_in_dsr(dev) && dbi_outputs[i] &&
!(dbi_outputs[i]->mode_flags & MODE_SETTING_ON_GOING)) {
mdfld_dsi_dbi_enter_dsr(dbi_outputs[i],
dbi_outputs[i]->channel_num ? 2 : 0);
@@ -565,61 +535,6 @@ void mdfld_dbi_update_panel(struct drm_device *dev, int pipe)
}
}
-/*timers for DSR*/
-static void mdfld_dsi_dbi_dsr_timer_func(unsigned long data)
-{
- struct drm_device *dev = (struct drm_device *)data;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info;
- struct timer_list *dsr_timer = &dsr_info->dsr_timer;
- unsigned long flags;
-
- mdfld_dbi_update_panel(dev, 0);
-
- if (dsr_info->dsr_idle_count > 1)
- return;
-
- spin_lock_irqsave(&dsr_info->dsr_timer_lock, flags);
- if (!timer_pending(dsr_timer)) {
- dsr_timer->expires = jiffies + MDFLD_DSR_DELAY;
- add_timer(dsr_timer);
- }
- spin_unlock_irqrestore(&dsr_info->dsr_timer_lock, flags);
-}
-
-static int mdfld_dsi_dbi_dsr_timer_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info;
- struct timer_list *dsr_timer = &dsr_info->dsr_timer;
- unsigned long flags;
-
- spin_lock_init(&dsr_info->dsr_timer_lock);
- spin_lock_irqsave(&dsr_info->dsr_timer_lock, flags);
-
- init_timer(dsr_timer);
-
- dsr_timer->data = (unsigned long)dev;
- dsr_timer->function = mdfld_dsi_dbi_dsr_timer_func;
- dsr_timer->expires = jiffies + MDFLD_DSR_DELAY;
-
- spin_unlock_irqrestore(&dsr_info->dsr_timer_lock, flags);
- return 0;
-}
-
-void mdfld_dbi_dsr_timer_start(struct mdfld_dbi_dsr_info *dsr_info)
-{
- struct timer_list *dsr_timer = &dsr_info->dsr_timer;
- unsigned long flags;
-
- spin_lock_irqsave(&dsr_info->dsr_timer_lock, flags);
- if (!timer_pending(dsr_timer)) {
- dsr_timer->expires = jiffies + MDFLD_DSR_DELAY;
- add_timer(dsr_timer);
- }
- spin_unlock_irqrestore(&dsr_info->dsr_timer_lock, flags);
-}
-
int mdfld_dbi_dsr_init(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
@@ -643,7 +558,6 @@ void mdfld_dbi_dsr_exit(struct drm_device *dev)
struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info;
if (dsr_info) {
- del_timer_sync(&dsr_info->dsr_timer);
kfree(dsr_info);
dev_priv->dbi_dsr_info = NULL;
}
@@ -660,13 +574,13 @@ void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config,
dev_dbg(dev->dev, "Init DBI interface on pipe %d...\n", pipe);
- /*un-ready device*/
+ /* Un-ready device */
REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000);
- /*init dsi adapter before kicking off*/
+ /* Init dsi adapter before kicking off */
REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018);
- /*TODO: figure out how to setup these registers*/
+ /* TODO: figure out how to setup these registers */
REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408);
REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset),
0x000a0014);
@@ -674,16 +588,16 @@ void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config,
REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000001);
REG_WRITE((MIPIA_HS_LS_DBI_ENABLE_REG + reg_offset), 0x00000000);
- /*enable all interrupts*/
+ /* Enable all interrupts */
REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff);
- /*max value: 20 clock cycles of txclkesc*/
+ /* Max value: 20 clock cycles of txclkesc */
REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x0000001f);
- /*min 21 txclkesc, max: ffffh*/
+ /* Min 21 txclkesc, max: ffffh */
REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0x0000ffff);
- /*min: 7d0 max: 4e20*/
+ /* Min: 7d0 max: 4e20 */
REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x00000fa0);
- /*set up func_prg*/
+ /* Set up func_prg */
val |= lane_count;
val |= (dsi_config->channel_num << DSI_DBI_VIRT_CHANNEL_OFFSET);
val |= DSI_DBI_COLOR_FORMAT_OPTION2;
@@ -692,7 +606,7 @@ void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config,
REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), 0x3fffff);
REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff);
- /*de-assert dbi_stall when half of DBI FIFO is empty*/
+ /* De-assert dbi_stall when half of DBI FIFO is empty */
/* REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000000); */
REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46);
@@ -718,42 +632,6 @@ static const struct drm_encoder_funcs mdfld_dsi_dbi_encoder_funcs = {
#endif
-static int mdfld_dbi_panel_reset(struct mdfld_dsi_dbi_output *output)
-{
- unsigned gpio;
- int ret;
-
- switch (output->channel_num) {
- case 0:
- gpio = 128;
- break;
- case 1:
- gpio = 34;
- break;
- default:
- pr_err("Invalid output\n");
- return -EINVAL;
- }
-
- ret = gpio_request(gpio, "gfx");
- if (ret) {
- pr_err("gpio_rqueset failed\n");
- return ret;
- }
-
- ret = gpio_direction_output(gpio, 1);
- if (ret) {
- pr_err("gpio_direction_output failed\n");
- goto gpio_error;
- }
- gpio_get_value(128);
-gpio_error:
- if (gpio_is_valid(gpio))
- gpio_free(gpio);
-
- return ret;
-}
-
/*
* Init DSI DBI encoder.
* Allocate an mdfld_dsi_encoder and attach it to given @dsi_connector
@@ -776,13 +654,44 @@ struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev,
#else
struct mdfld_dbi_dsr_info *dsr_info = dev_priv ? (dev_priv->dbi_dsr_info) : NULL;
#endif
+ u32 data = 0;
+ int pipe;
int ret;
- if (!pg || !dsi_connector) {
+ if (!pg || !dsi_connector || !p_funcs) {
WARN_ON(1);
return NULL;
}
+ dsi_config = mdfld_dsi_get_config(dsi_connector);
+ pipe = dsi_connector->pipe;
+
+ /*panel hard-reset*/
+ if (p_funcs->reset) {
+ ret = p_funcs->reset(pipe);
+ if (ret) {
+ DRM_ERROR("Panel %d hard-reset failed\n", pipe);
+ return NULL;
+ }
+ }
+ /* Panel drvIC init */
+ if (p_funcs->drv_ic_init)
+ p_funcs->drv_ic_init(dsi_config, pipe);
+
+ /* Panel power mode detect */
+ ret = mdfld_dsi_get_power_mode(dsi_config,
+ &data,
+ MDFLD_DSI_HS_TRANSMISSION);
+ if (ret) {
+ DRM_ERROR("Panel %d get power mode failed\n", pipe);
+ dsi_connector->status = connector_status_disconnected;
+ } else {
+ DRM_INFO("pipe %d power mode 0x%x\n", pipe, data);
+ dsi_connector->status = connector_status_connected;
+ }
+
+ /*TODO: get panel info from DDB*/
+
dbi_output = kzalloc(sizeof(struct mdfld_dsi_dbi_output), GFP_KERNEL);
if (!dbi_output) {
dev_err(dev->dev, "No memory\n");
@@ -802,23 +711,10 @@ struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev,
dbi_output->dev = dev;
dbi_output->p_funcs = p_funcs;
-
- /*panel reset*/
- ret = mdfld_dbi_panel_reset(dbi_output);
- if (ret) {
- dev_err(dev->dev, "reset panel error\n");
- goto out_err1;
- }
-
- /*TODO: get panel info from DDB*/
-
- /*get fixed mode*/
- dsi_config = mdfld_dsi_get_config(dsi_connector);
fixed_mode = dsi_config->fixed_mode;
-
dbi_output->panel_fixed_mode = fixed_mode;
- /*create drm encoder object*/
+ /* Create drm encoder object */
connector = &dsi_connector->base.base;
encoder = &dbi_output->base.base;
drm_encoder_init(dev,
@@ -827,10 +723,10 @@ struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev,
DRM_MODE_ENCODER_MIPI);
drm_encoder_helper_add(encoder, p_funcs->encoder_helper_funcs);
- /*attach to given connector*/
+ /* Attach to given connector */
drm_mode_connector_attach_encoder(connector, encoder);
- /*set possible crtcs and clones*/
+ /* Set possible CRTCs and clones */
if (dsi_connector->pipe) {
encoder->possible_crtcs = (1 << 2);
encoder->possible_clones = (1 << 1);
@@ -842,28 +738,31 @@ struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev,
dev_priv->dsr_fb_update = 0;
dev_priv->dsr_enable = false;
dev_priv->exit_idle = mdfld_dsi_dbi_exit_dsr;
-#if defined(CONFIG_MDFLD_DSI_DPU) || defined(CONFIG_MDFLD_DSI_DSR)
- dev_priv->dsr_enable_config = false;
-#endif /*CONFIG_MDFLD_DSI_DSR*/
dbi_output->first_boot = true;
dbi_output->mode_flags = MODE_SETTING_IN_ENCODER;
#ifdef CONFIG_MDFLD_DSI_DPU
- /*add this output to dpu_info*/
- if (dsi_connector->pipe == 0)
- dpu_info->dbi_outputs[0] = dbi_output;
- } else {
- dpu_info->dbi_outputs[1] = dbi_output;
+ /* Add this output to dpu_info */
+ if (dsi_connector->status == connector_status_connected) {
+ if (dsi_connector->pipe == 0)
+ dpu_info->dbi_outputs[0] = dbi_output;
+ else
+ dpu_info->dbi_outputs[1] = dbi_output;
+
+ dpu_info->dbi_output_num++;
}
- dpu_info->dbi_output_num++;
+
#else /*CONFIG_MDFLD_DSI_DPU*/
- /*add this output to dsr_info*/
- if (dsi_connector->pipe == 0)
- dsr_info->dbi_outputs[0] = dbi_output;
- else
- dsr_info->dbi_outputs[1] = dbi_output;
- dsr_info->dbi_output_num++;
+ if (dsi_connector->status == connector_status_connected) {
+ /* Add this output to dsr_info */
+ if (dsi_connector->pipe == 0)
+ dsr_info->dbi_outputs[0] = dbi_output;
+ else
+ dsr_info->dbi_outputs[1] = dbi_output;
+
+ dsr_info->dbi_output_num++;
+ }
#endif
return &dbi_output->base;
out_err1:
diff --git a/drivers/staging/gma500/mdfld_dsi_dbi.h b/drivers/staging/gma500/mdfld_dsi_dbi.h
index a51e2f8..a2ec6fd 100644
--- a/drivers/staging/gma500/mdfld_dsi_dbi.h
+++ b/drivers/staging/gma500/mdfld_dsi_dbi.h
@@ -59,9 +59,6 @@ struct mdfld_dsi_dbi_output {
/* Backlight operations */
/* DSR timer */
- spinlock_t dsr_timer_lock;
- struct timer_list dsr_timer;
- void(*dsi_timer_func)(unsigned long data);
u32 dsr_idle_count;
bool dsr_fb_update_done;
@@ -81,22 +78,11 @@ struct mdfld_dbi_dsr_info {
int dbi_output_num;
struct mdfld_dsi_dbi_output *dbi_outputs[2];
- spinlock_t dsr_timer_lock;
- struct timer_list dsr_timer;
u32 dsr_idle_count;
};
#define DBI_CB_TIMEOUT_COUNT 0xffff
-/* DCS commands */
-#define enter_sleep_mode 0x10
-#define exit_sleep_mode 0x11
-#define set_display_off 0x28
-#define set_dispaly_on 0x29
-#define set_column_address 0x2a
-#define set_page_addr 0x2b
-#define write_mem_start 0x2c
-
/* Offsets */
#define CMD_MEM_ADDR_OFFSET 0
@@ -132,7 +118,7 @@ static inline int mdfld_dsi_dbi_cmd_sent(struct mdfld_dsi_dbi_output *dbi_output
/* Query the command execution status */
while (retry--)
- if (!(REG_READ(MIPIA_CMD_ADD_REG + reg_offset) & (1 << 10)))
+ if (!(REG_READ(MIPIA_CMD_ADD_REG + reg_offset) & (1 << 0)))
break;
if (!retry) {
@@ -164,13 +150,11 @@ static inline int mdfld_dsi_dbi_cb_ready(struct mdfld_dsi_dbi_output *dbi_output
extern void mdfld_dsi_dbi_output_init(struct drm_device *dev,
struct psb_intel_mode_device *mode_dev, int pipe);
-extern void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src,
- void *p_surfaceAddr, bool check_hw_on_only);
+extern void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src);
extern void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output,
int pipe);
extern int mdfld_dbi_dsr_init(struct drm_device *dev);
extern void mdfld_dbi_dsr_exit(struct drm_device *dev);
-extern void mdfld_dbi_dsr_timer_start(struct mdfld_dbi_dsr_info *dsr_info);
extern struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev,
struct mdfld_dsi_connector *dsi_connector,
struct panel_funcs *p_funcs);
@@ -178,7 +162,6 @@ extern int mdfld_dsi_dbi_send_dcs(struct mdfld_dsi_dbi_output *dbi_output,
u8 dcs, u8 *param, u32 num, u8 data_src);
extern int mdfld_dsi_dbi_update_area(struct mdfld_dsi_dbi_output *dbi_output,
u16 x1, u16 y1, u16 x2, u16 y2);
-extern void mdfld_dbi_dsr_timer_start(struct mdfld_dbi_dsr_info *dsr_info);
extern int mdfld_dsi_dbi_update_power(struct mdfld_dsi_dbi_output *dbi_output,
int mode);
extern void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config,
diff --git a/drivers/staging/gma500/mdfld_dsi_dbi_dpu.h b/drivers/staging/gma500/mdfld_dsi_dbi_dpu.h
index 4ca9682..42367ed 100644
--- a/drivers/staging/gma500/mdfld_dsi_dbi_dpu.h
+++ b/drivers/staging/gma500/mdfld_dsi_dbi_dpu.h
@@ -90,9 +90,6 @@ static inline int mdfld_dpu_region_extent(struct psb_drm_dpu_rect *origin,
{
int x1, y1, x2, y2;
- /* PSB_DEBUG_ENTRY("rect (%d, %d, %d, %d)\n",
- rect->x, rect->y, rect->width, rect->height); */
-
x1 = origin->x + origin->width;
y1 = origin->y + origin->height;
diff --git a/drivers/staging/gma500/mdfld_dsi_dpi.c b/drivers/staging/gma500/mdfld_dsi_dpi.c
index fce3c20..6e03a91 100644
--- a/drivers/staging/gma500/mdfld_dsi_dpi.c
+++ b/drivers/staging/gma500/mdfld_dsi_dpi.c
@@ -69,26 +69,6 @@ static void mdfld_wait_for_HS_CTRL_FIFO(struct drm_device *dev, u32 pipe)
dev_warn(dev->dev, "MIPI: HS CMD FIFO was never cleared!\n");
}
-static void mdfld_wait_for_PIPEA_DISABLE(struct drm_device *dev, u32 pipe)
-{
- u32 pipeconf_reg = PIPEACONF;
- int timeout = 0;
-
- if (pipe == 2)
- pipeconf_reg = PIPECCONF;
-
- udelay(500);
-
- /* This will time out after approximately 2+ seconds */
- while ((timeout < 20000) && (REG_READ(pipeconf_reg) & 0x40000000)) {
- udelay(100);
- timeout++;
- }
-
- if (timeout == 20000)
- dev_warn(dev->dev, "MIPI: PIPE was not disabled!\n");
-}
-
static void mdfld_wait_for_DPI_CTRL_FIFO(struct drm_device *dev, u32 pipe)
{
u32 gen_fifo_stat_reg = MIPIA_GEN_FIFO_STAT_REG;
@@ -147,8 +127,6 @@ void mdfld_dsi_tpo_ic_init(struct mdfld_dsi_config *dsi_config, u32 pipe)
u32 gen_ctrl_reg = MIPIA_HS_GEN_CTRL_REG;
u32 gen_ctrl_val = GEN_LONG_WRITE;
- dev_warn(dev->dev, "Enter mrst init TPO MIPI display.\n");
-
if (pipe == 2) {
gen_data_reg = HS_GEN_DATA_REG + MIPIC_REG_OFFSET;
gen_ctrl_reg = HS_GEN_CTRL_REG + MIPIC_REG_OFFSET;
@@ -331,51 +309,8 @@ void mdfld_dsi_tpo_ic_init(struct mdfld_dsi_config *dsi_config, u32 pipe)
REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS));
}
-/* ************************************************************************* *\
- * FUNCTION: mdfld_init_TMD_MIPI
- *
- * DESCRIPTION: This function is called only by mrst_dsi_mode_set and
- * restore_display_registers. since this function does not
- * acquire the mutex, it is important that the calling function
- * does!
-\* ************************************************************************* */
-
-static u32 tmd_cmd_mcap_off[] = {0x000000b2};
-static u32 tmd_cmd_enable_lane_switch[] = {0x000101ef};
-static u32 tmd_cmd_set_lane_num[] = {0x006360ef};
-static u32 tmd_cmd_set_mode[] = {0x000000b3};
-static u32 tmd_cmd_set_sync_pulse_mode[] = {0x000961ef};
-static u32 tmd_cmd_set_video_mode[] = {0x00000153};
-static u32 tmd_cmd_enable_backlight[] = {0x00005ab4};//no auto_bl,need add in furtrue
-static u32 tmd_cmd_set_backlight_dimming[] = {0x00000ebd};
-
-void mdfld_dsi_tmd_drv_ic_init(struct mdfld_dsi_config *dsi_config, u32 pipe)
-{
- struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config);
-
- if(!sender) {
- WARN_ON(1);
- return;
- }
-
- if(dsi_config->dvr_ic_inited)
- return;
-
- msleep(3);
-
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_mcap_off, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_lane_switch, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_lane_num, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_mode, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_sync_pulse_mode, 1, 0);
- /*TODO: set page and column here*/
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_video_mode, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_backlight, 1, 0);
- mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_backlight_dimming,1,0);
- dsi_config->dvr_ic_inited = 1;
-}
-
-static u16 mdfld_dsi_dpi_to_byte_clock_count(int pixel_clock_count, int num_lane, int bpp)
+static u16 mdfld_dsi_dpi_to_byte_clock_count(int pixel_clock_count,
+ int num_lane, int bpp)
{
return (u16)((pixel_clock_count * bpp) / (num_lane * 8));
}
@@ -387,8 +322,8 @@ static u16 mdfld_dsi_dpi_to_byte_clock_count(int pixel_clock_count, int num_lane
* use crtc mode values later
*/
int mdfld_dsi_dpi_timing_calculation(struct drm_display_mode *mode,
- struct mdfld_dsi_dpi_timing *dpi_timing,
- int num_lane, int bpp)
+ struct mdfld_dsi_dpi_timing *dpi_timing,
+ int num_lane, int bpp)
{
int pclk_hsync, pclk_hfp, pclk_hbp, pclk_hactive;
int pclk_vsync, pclk_vfp, pclk_vbp, pclk_vactive;
@@ -408,16 +343,6 @@ int mdfld_dsi_dpi_timing_calculation(struct drm_display_mode *mode,
pclk_vsync = mode->vsync_end - mode->vsync_start;
pclk_vbp = mode->vtotal - mode->vsync_end;
-#ifdef MIPI_DEBUG_LOG
- printk(KERN_ALERT "[DISPLAY] %s: pclk_hactive = %d\n", __func__, pclk_hactive);
- printk(KERN_ALERT "[DISPLAY] %s: pclk_hfp = %d\n", __func__, pclk_hfp);
- printk(KERN_ALERT "[DISPLAY] %s: pclk_hsync = %d\n", __func__, pclk_hsync);
- printk(KERN_ALERT "[DISPLAY] %s: pclk_hbp = %d\n", __func__, pclk_hbp);
- printk(KERN_ALERT "[DISPLAY] %s: pclk_vactive = %d\n", __func__, pclk_vactive);
- printk(KERN_ALERT "[DISPLAY] %s: pclk_vfp = %d\n", __func__, pclk_vfp);
- printk(KERN_ALERT "[DISPLAY] %s: pclk_vsync = %d\n", __func__, pclk_vsync);
- printk(KERN_ALERT "[DISPLAY] %s: pclk_vbp = %d\n", __func__, pclk_vbp);
-#endif
/*
* byte clock counts were calculated by following formula
* bclock_count = pclk_count * bpp / num_lane / 8
@@ -519,7 +444,6 @@ void mdfld_dsi_dpi_controller_init(struct mdfld_dsi_config *dsi_config, int pipe
void mdfld_dsi_dpi_turn_on(struct mdfld_dsi_dpi_output *output, int pipe)
{
struct drm_device *dev = output->dev;
- /* struct drm_psb_private *dev_priv = dev->dev_private; */
u32 reg_offset = 0;
if(output->panel_on)
@@ -555,7 +479,6 @@ void mdfld_dsi_dpi_turn_on(struct mdfld_dsi_dpi_output *output, int pipe)
static void mdfld_dsi_dpi_shut_down(struct mdfld_dsi_dpi_output *output, int pipe)
{
struct drm_device *dev = output->dev;
- /* struct drm_psb_private *dev_priv = dev->dev_private; */
u32 reg_offset = 0;
/*if output is on, or mode setting didn't happen, ignore this*/
@@ -576,6 +499,7 @@ static void mdfld_dsi_dpi_shut_down(struct mdfld_dsi_dpi_output *output, int pip
}
if(REG_READ(MIPIA_DPI_CONTROL_REG + reg_offset) == DSI_DPI_CTRL_HS_SHUTDOWN) {
+ dev_warn(dev->dev, "try to send the same package again, abort!");
goto shutdown_out;
}
@@ -590,6 +514,14 @@ shutdown_out:
/* dev_priv->dpi_panel_on2 = false; */
/* else if (pipe == 0) */
/* dev_priv->dpi_panel_on = false; */
+ /* #ifdef CONFIG_PM_RUNTIME*/
+ /* if (drm_psb_ospm && !enable_gfx_rtpm) { */
+ /* pm_runtime_allow(&gpDrmDevice->pdev->dev); */
+ /* schedule_delayed_work(&dev_priv->rtpm_work, 30 * 1000); */
+ /* } */
+ /*if (enable_gfx_rtpm) */
+ /* pm_schedule_suspend(&dev->pdev->dev, gfxrtdelay); */
+ /* #endif */
}
void mdfld_dsi_dpi_set_power(struct drm_encoder *encoder, bool on)
@@ -616,7 +548,7 @@ void mdfld_dsi_dpi_set_power(struct drm_encoder *encoder, bool on)
if (mdfld_get_panel_type(dev, pipe) == TMD_VID){
mdfld_dsi_dpi_turn_on(dpi_output, pipe);
} else {
- /*enable mipi port*/
+ /* Enable mipi port */
REG_WRITE(mipi_reg, (REG_READ(mipi_reg) | (1 << 31)));
REG_READ(mipi_reg);
@@ -636,7 +568,7 @@ void mdfld_dsi_dpi_set_power(struct drm_encoder *encoder, bool on)
mdfld_dsi_dpi_shut_down(dpi_output, pipe);
} else {
mdfld_dsi_dpi_shut_down(dpi_output, pipe);
- /*disable mipi port*/
+ /* Disable mipi port */
REG_WRITE(mipi_reg, (REG_READ(mipi_reg) & ~(1<<31)));
REG_READ(mipi_reg);
}
@@ -656,8 +588,15 @@ void mdfld_dsi_dpi_dpms(struct drm_encoder *encoder, int mode)
if (mode == DRM_MODE_DPMS_ON)
mdfld_dsi_dpi_set_power(encoder, true);
- else
+ else {
mdfld_dsi_dpi_set_power(encoder, false);
+#if 0 /* FIXME */
+#ifdef CONFIG_PM_RUNTIME
+ if (enable_gfx_rtpm)
+ pm_schedule_suspend(&gpDrmDevice->pdev->dev, gfxrtdelay);
+#endif
+#endif
+ }
}
bool mdfld_dsi_dpi_mode_fixup(struct drm_encoder *encoder,
@@ -694,77 +633,6 @@ void mdfld_dsi_dpi_commit(struct drm_encoder *encoder)
mdfld_dsi_dpi_set_power(encoder, true);
}
-void dsi_debug_MIPI_reg(struct drm_device *dev)
-{
- u32 temp_val = 0;
-
- temp_val = REG_READ(MIPI);
- printk(KERN_ALERT "[DISPLAY] MIPI = %x\n", temp_val);
-
- /* set the lane speed */
- temp_val = REG_READ(MIPI_CONTROL_REG);
- printk(KERN_ALERT "[DISPLAY] MIPI_CONTROL_REG = %x\n", temp_val);
-
- /* Enable all the error interrupt */
- temp_val = REG_READ(INTR_EN_REG);
- printk(KERN_ALERT "[DISPLAY] INTR_EN_REG = %x\n", temp_val);
- temp_val = REG_READ(TURN_AROUND_TIMEOUT_REG);
- printk(KERN_ALERT "[DISPLAY] TURN_AROUND_TIMEOUT_REG = %x\n", temp_val);
- temp_val = REG_READ(DEVICE_RESET_REG);
- printk(KERN_ALERT "[DISPLAY] DEVICE_RESET_REG = %x\n", temp_val);
- temp_val = REG_READ(INIT_COUNT_REG);
- printk(KERN_ALERT "[DISPLAY] INIT_COUNT_REG = %x\n", temp_val);
-
- temp_val = REG_READ(DSI_FUNC_PRG_REG);
- printk(KERN_ALERT "[DISPLAY] DSI_FUNC_PRG_REG = %x\n", temp_val);
-
- temp_val = REG_READ(DPI_RESOLUTION_REG);
- printk(KERN_ALERT "[DISPLAY] DPI_RESOLUTION_REG = %x\n", temp_val);
-
- temp_val = REG_READ(VERT_SYNC_PAD_COUNT_REG);
- printk(KERN_ALERT "[DISPLAY] VERT_SYNC_PAD_COUNT_REG = %x\n", temp_val);
- temp_val = REG_READ(VERT_BACK_PORCH_COUNT_REG);
- printk(KERN_ALERT "[DISPLAY] VERT_BACK_PORCH_COUNT_REG = %x\n", temp_val);
- temp_val = REG_READ(VERT_FRONT_PORCH_COUNT_REG);
- printk(KERN_ALERT "[DISPLAY] VERT_FRONT_PORCH_COUNT_REG = %x\n", temp_val);
-
- temp_val = REG_READ(HORIZ_SYNC_PAD_COUNT_REG);
- printk(KERN_ALERT "[DISPLAY] HORIZ_SYNC_PAD_COUNT_REG = %x\n", temp_val);
- temp_val = REG_READ(HORIZ_BACK_PORCH_COUNT_REG);
- printk(KERN_ALERT "[DISPLAY] HORIZ_BACK_PORCH_COUNT_REG = %x\n", temp_val);
- temp_val = REG_READ(HORIZ_FRONT_PORCH_COUNT_REG);
- printk(KERN_ALERT "[DISPLAY] HORIZ_FRONT_PORCH_COUNT_REG = %x\n", temp_val);
- temp_val = REG_READ(HORIZ_ACTIVE_AREA_COUNT_REG);
- printk(KERN_ALERT "[DISPLAY] HORIZ_ACTIVE_AREA_COUNT_REG = %x\n", temp_val);
-
- temp_val = REG_READ(VIDEO_FMT_REG);
- printk(KERN_ALERT "[DISPLAY] VIDEO_FMT_REG = %x\n", temp_val);
-
- temp_val = REG_READ(HS_TX_TIMEOUT_REG);
- printk(KERN_ALERT "[DISPLAY] HS_TX_TIMEOUT_REG = %x\n", temp_val);
- temp_val = REG_READ(LP_RX_TIMEOUT_REG);
- printk(KERN_ALERT "[DISPLAY] LP_RX_TIMEOUT_REG = %x\n", temp_val);
-
- temp_val = REG_READ(HIGH_LOW_SWITCH_COUNT_REG);
- printk(KERN_ALERT "[DISPLAY] HIGH_LOW_SWITCH_COUNT_REG = %x\n", temp_val);
-
- temp_val = REG_READ(EOT_DISABLE_REG);
- printk(KERN_ALERT "[DISPLAY] EOT_DISABLE_REG = %x\n", temp_val);
-
- temp_val = REG_READ(LP_BYTECLK_REG);
- printk(KERN_ALERT "[DISPLAY] LP_BYTECLK_REG = %x\n", temp_val);
- temp_val = REG_READ(MAX_RET_PAK_REG);
- printk(KERN_ALERT "[DISPLAY] MAX_RET_PAK_REG = %x\n", temp_val);
- temp_val = REG_READ(DPI_CONTROL_REG);
- printk(KERN_ALERT "[DISPLAY] DPI_CONTROL_REG = %x\n", temp_val);
- temp_val = REG_READ(DPHY_PARAM_REG);
- printk(KERN_ALERT "[DISPLAY] DPHY_PARAM_REG = %x\n", temp_val);
-// temp_val = REG_READ(PIPEACONF);
-// printk(KERN_INFO "[DISPLAY] PIPEACONF = %x\n", temp_val);
-// temp_val = REG_READ(DSPACNTR);
-// printk(KERN_INFO "[DISPLAY] DSPACNTR = %x\n", temp_val);
-}
-
void mdfld_dsi_dpi_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
@@ -804,14 +672,11 @@ void mdfld_dsi_dpi_mode_set(struct drm_encoder *encoder,
REG_WRITE(mipi_reg, mipi);
REG_READ(mipi_reg);
- /* Set up DSI controller DPI interface*/
+ /* Set up DSI controller DPI interface */
mdfld_dsi_dpi_controller_init(dsi_config, pipe);
- if (mdfld_get_panel_type(dev, pipe) == TMD_VID) {
- /* init driver ic */
- mdfld_dsi_tmd_drv_ic_init(dsi_config, pipe);
- } else {
- /*turn on DPI interface*/
+ if (mdfld_get_panel_type(dev, pipe) != TMD_VID) {
+ /* Turn on DPI interface */
mdfld_dsi_dpi_turn_on(dpi_output, pipe);
}
@@ -829,81 +694,15 @@ void mdfld_dsi_dpi_mode_set(struct drm_encoder *encoder,
REG_READ(MIPIA_INTR_STAT_REG + reg_offset),
dpi_output->panel_on);
- if (mdfld_get_panel_type(dev, pipe) == TMD_VID) {
- //mdfld_dsi_dpi_turn_on(dpi_output, pipe);
- } else {
- /* init driver ic */
+ if (mdfld_get_panel_type(dev, pipe) != TMD_VID) {
+ /* Init driver ic */
mdfld_dsi_tpo_ic_init(dsi_config, pipe);
- /*init backlight*/
+ /* Init backlight */
mdfld_dsi_brightness_init(dsi_config, pipe);
}
-
-#ifdef MIPI_DEBUG_LOG
- dsi_debug_MIPI_reg(dev);
-#endif
gma_power_end(dev);
}
-static int mdfld_dpi_panel_reset(int pipe)
-{
- unsigned gpio;
- int ret = 0;
-
- switch(pipe) {
- case 0:
- gpio = 128;
- break;
- case 2:
- gpio = 34;
- break;
- default:
- DRM_ERROR("Invalid output\n");
- return -EINVAL;
- }
-
- ret = gpio_request(gpio, "gfx");
- if(ret) {
- DRM_ERROR("gpio_rqueset failed\n");
- return ret;
- }
- ret = gpio_direction_output(gpio, 1);
- if(ret) {
- DRM_ERROR("gpio_direction_output failed\n");
- goto gpio_error;
- }
-
- gpio_get_value(128);
-
-gpio_error:
- if(gpio_is_valid(gpio))
- gpio_free(gpio);
- return ret;
-}
-
-/**
- * Exit from DSR
- */
-void mdfld_dsi_dpi_exit_idle (struct drm_device *dev, u32 update_src, void *p_surfaceAddr, bool check_hw_on_only)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (!gma_power_begin(dev, true)) {
- DRM_ERROR("hw begin failed\n");
- return;
- }
-
- /* update the surface base address. */
- if (p_surfaceAddr) {
- REG_WRITE(DSPASURF, *((u32 *)p_surfaceAddr));
-#if defined(CONFIG_MDFD_DUAL_MIPI)
- REG_WRITE(DSPCSURF, *((u32 *)p_surfaceAddr));
-#endif
- }
- mid_enable_pipe_event(dev_priv, 0);
- psb_enable_pipestat(dev_priv, 0, PIPE_VBLANK_INTERRUPT_ENABLE);
- dev_priv->is_in_idle = false;
- dev_priv->dsr_idle_count = 0;
-}
/*
* Init DSI DPI encoder.
@@ -912,40 +711,63 @@ void mdfld_dsi_dpi_exit_idle (struct drm_device *dev, u32 update_src, void *p_su
*/
struct mdfld_dsi_encoder *mdfld_dsi_dpi_init(struct drm_device *dev,
struct mdfld_dsi_connector *dsi_connector,
- struct panel_funcs*p_funcs)
+ struct panel_funcs *p_funcs)
{
- struct drm_psb_private *dev_priv = dev->dev_private;
struct mdfld_dsi_dpi_output *dpi_output = NULL;
struct mdfld_dsi_config *dsi_config;
struct drm_connector *connector = NULL;
struct drm_encoder *encoder = NULL;
struct drm_display_mode *fixed_mode = NULL;
+ int pipe;
+ u32 data;
int ret;
- if (!dsi_connector) {
+ if (!dsi_connector || !p_funcs) {
WARN_ON(1);
return NULL;
}
+ dsi_config = mdfld_dsi_get_config(dsi_connector);
+ pipe = dsi_connector->pipe;
+
+ /* Panel hard-reset */
+ if (p_funcs->reset) {
+ ret = p_funcs->reset(pipe);
+ if (ret) {
+ DRM_ERROR("Panel %d hard-reset failed\n", pipe);
+ return NULL;
+ }
+ }
+
+ /* Panel drvIC init */
+ if (p_funcs->drv_ic_init)
+ p_funcs->drv_ic_init(dsi_config, pipe);
+
+ /* Panel power mode detect */
+ ret = mdfld_dsi_get_power_mode(dsi_config,
+ &data,
+ MDFLD_DSI_LP_TRANSMISSION);
+ if (ret) {
+ DRM_ERROR("Panel %d get power mode failed\n", pipe);
+ dsi_connector->status = connector_status_disconnected;
+ } else {
+ DRM_INFO("pipe %d power mode 0x%x\n", pipe, data);
+ dsi_connector->status = connector_status_connected;
+ }
+
dpi_output = kzalloc(sizeof(struct mdfld_dsi_dpi_output), GFP_KERNEL);
if(!dpi_output) {
dev_err(dev->dev, "No memory for dsi_dpi_output\n");
return NULL;
}
- /* Panel reset */
- ret = mdfld_dpi_panel_reset(dsi_connector->pipe);
- if(ret) {
- DRM_ERROR("reset panel error\n");
- goto out_err1;
- }
-
+
if(dsi_connector->pipe)
dpi_output->panel_on = 0;
-
+ else
dpi_output->panel_on = 0;
-
dpi_output->dev = dev;
+ dpi_output->p_funcs = p_funcs;
dpi_output->first_boot = 1;
/* Get fixed mode */
@@ -973,19 +795,6 @@ struct mdfld_dsi_encoder *mdfld_dsi_dpi_init(struct drm_device *dev,
encoder->possible_crtcs = (1 << 0);
encoder->possible_clones = (1 << 0);
}
-
- dev_priv->dsr_fb_update = 0;
- dev_priv->dsr_enable = false;
- dev_priv->exit_idle = mdfld_dsi_dpi_exit_idle;
-#if defined(CONFIG_MDFLD_DSI_DPU) || defined(CONFIG_MDFLD_DSI_DSR)
- dev_priv->dsr_enable_config = true;
-#endif /*CONFIG_MDFLD_DSI_DSR*/
-
return &dpi_output->base;
-
-out_err1:
- if(dpi_output)
- kfree(dpi_output);
- return NULL;
}
diff --git a/drivers/staging/gma500/mdfld_dsi_dpi.h b/drivers/staging/gma500/mdfld_dsi_dpi.h
index 68e65cc..ed92d45 100644
--- a/drivers/staging/gma500/mdfld_dsi_dpi.h
+++ b/drivers/staging/gma500/mdfld_dsi_dpi.h
@@ -47,6 +47,8 @@ struct mdfld_dsi_dpi_output {
int panel_on;
int first_boot;
+
+ struct panel_funcs *p_funcs;
};
#define MDFLD_DSI_DPI_OUTPUT(dsi_encoder) \
@@ -73,8 +75,4 @@ extern void mdfld_dsi_dpi_turn_on(struct mdfld_dsi_dpi_output *output,
int pipe);
extern void mdfld_dsi_dpi_controller_init(struct mdfld_dsi_config *si_config,
int pipe);
-extern void mid_enable_pipe_event(struct drm_psb_private *dev_priv, int pipe);
-extern void psb_enable_pipestat(struct drm_psb_private *dev_priv, int pipe,
- u32 mask);
-
#endif /*__MDFLD_DSI_DPI_H__*/
diff --git a/drivers/staging/gma500/mdfld_dsi_output.c b/drivers/staging/gma500/mdfld_dsi_output.c
index ff75ece..3286c3d 100644
--- a/drivers/staging/gma500/mdfld_dsi_output.c
+++ b/drivers/staging/gma500/mdfld_dsi_output.c
@@ -35,55 +35,18 @@
#define MDFLD_DSI_BRIGHTNESS_MAX_LEVEL 100
-/* get the CABC LABC from command line. */
static int CABC_control = 1;
static int LABC_control = 1;
-#ifdef MODULE
module_param (CABC_control, int, 0644);
module_param (LABC_control, int, 0644);
-#else
-static int __init parse_CABC_control(char *arg)
-{
- /* CABC control can be passed in as a cmdline parameter */
- /* to enable this feature add CABC=1 to cmdline */
- /* to disable this feature add CABC=0 to cmdline */
- if (!arg)
- return -EINVAL;
-
- if (!strcasecmp(arg, "0"))
- CABC_control = 0;
- else if (!strcasecmp (arg, "1"))
- CABC_control = 1;
-
- return 0;
-}
-early_param ("CABC", parse_CABC_control);
-
-static int __init parse_LABC_control(char *arg)
-{
- /* LABC control can be passed in as a cmdline parameter */
- /* to enable this feature add LABC=1 to cmdline */
- /* to disable this feature add LABC=0 to cmdline */
- if (!arg)
- return -EINVAL;
-
- if (!strcasecmp(arg, "0"))
- LABC_control = 0;
- else if (!strcasecmp (arg, "1"))
- LABC_control = 1;
-
- return 0;
-}
-early_param ("LABC", parse_LABC_control);
-#endif
/**
* make these MCS command global
* we don't need 'movl' everytime we send them.
* FIXME: these datas were provided by OEM, we should get them from GCT.
**/
-static u32 mdfld_dbi_mcs_hysteresis[] = {
+static const u32 mdfld_dbi_mcs_hysteresis[] = {
0x42000f57, 0x8c006400, 0xff00bf00, 0xffffffff,
0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
0x38000aff, 0x82005000, 0xff00ab00, 0xffffffff,
@@ -91,25 +54,26 @@ static u32 mdfld_dbi_mcs_hysteresis[] = {
0x000000ff,
};
-static u32 mdfld_dbi_mcs_display_profile[] = {
+static const u32 mdfld_dbi_mcs_display_profile[] = {
0x50281450, 0x0000c882, 0x00000000, 0x00000000,
0x00000000,
};
-static u32 mdfld_dbi_mcs_kbbc_profile[] = {
+static const u32 mdfld_dbi_mcs_kbbc_profile[] = {
0x00ffcc60, 0x00000000, 0x00000000, 0x00000000,
};
-static u32 mdfld_dbi_mcs_gamma_profile[] = {
+static const u32 mdfld_dbi_mcs_gamma_profile[] = {
0x81111158, 0x88888888, 0x88888888,
};
/*
* write hysteresis values.
*/
-static void mdfld_dsi_write_hysteresis (struct mdfld_dsi_config * dsi_config, int pipe)
+static void mdfld_dsi_write_hysteresis (struct mdfld_dsi_config *dsi_config,
+ int pipe)
{
- struct mdfld_dsi_pkg_sender * sender = mdfld_dsi_get_pkg_sender(dsi_config);
+ struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config);
if(!sender) {
WARN_ON(1);
@@ -124,9 +88,9 @@ static void mdfld_dsi_write_hysteresis (struct mdfld_dsi_config * dsi_config, in
/*
* write display profile values.
*/
-static void mdfld_dsi_write_display_profile (struct mdfld_dsi_config * dsi_config, int pipe)
+static void mdfld_dsi_write_display_profile(struct mdfld_dsi_config *dsi_config, int pipe)
{
- struct mdfld_dsi_pkg_sender * sender = mdfld_dsi_get_pkg_sender(dsi_config);
+ struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config);
if(!sender) {
WARN_ON(1);
@@ -143,7 +107,7 @@ static void mdfld_dsi_write_display_profile (struct mdfld_dsi_config * dsi_confi
*/
static void mdfld_dsi_write_kbbc_profile (struct mdfld_dsi_config * dsi_config, int pipe)
{
- struct mdfld_dsi_pkg_sender * sender = mdfld_dsi_get_pkg_sender(dsi_config);
+ struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config);
if(!sender) {
WARN_ON(1);
@@ -155,12 +119,12 @@ static void mdfld_dsi_write_kbbc_profile (struct mdfld_dsi_config * dsi_config,
MDFLD_DSI_SEND_PACKAGE);
}
-/**
+/*
* write gamma setting.
*/
-static void mdfld_dsi_write_gamma_setting (struct mdfld_dsi_config * dsi_config, int pipe)
+static void mdfld_dsi_write_gamma_setting (struct mdfld_dsi_config *dsi_config, int pipe)
{
- struct mdfld_dsi_pkg_sender * sender = mdfld_dsi_get_pkg_sender(dsi_config);
+ struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config);
if(!sender) {
WARN_ON(1);
@@ -172,7 +136,7 @@ static void mdfld_dsi_write_gamma_setting (struct mdfld_dsi_config * dsi_config,
MDFLD_DSI_SEND_PACKAGE);
}
-/**
+/*
* Check and see if the generic control or data buffer is empty and ready.
*/
void mdfld_dsi_gen_fifo_ready (struct drm_device *dev, u32 gen_fifo_stat_reg, u32 fifo_stat)
@@ -193,16 +157,16 @@ void mdfld_dsi_gen_fifo_ready (struct drm_device *dev, u32 gen_fifo_stat_reg, u3
gen_fifo_stat_reg);
}
-/**
+/*
* Manage the DSI MIPI keyboard and display brightness.
* FIXME: this is exported to OSPM code. should work out an specific
* display interface to OSPM.
*/
-void mdfld_dsi_brightness_init (struct mdfld_dsi_config * dsi_config, int pipe)
+void mdfld_dsi_brightness_init(struct mdfld_dsi_config *dsi_config, int pipe)
{
- struct mdfld_dsi_pkg_sender * sender = mdfld_dsi_get_pkg_sender(dsi_config);
- struct drm_device * dev = sender->dev;
- struct drm_psb_private * dev_priv = dev->dev_private;
+ struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config);
+ struct drm_device *dev = sender->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
u32 gen_ctrl_val;
if(!sender) {
@@ -223,7 +187,7 @@ void mdfld_dsi_brightness_init (struct mdfld_dsi_config * dsi_config, int pipe)
1,
MDFLD_DSI_SEND_PACKAGE);
- mdfld_dsi_write_hysteresis (dsi_config, pipe);
+ mdfld_dsi_write_hysteresis(dsi_config, pipe);
mdfld_dsi_write_display_profile (dsi_config, pipe);
mdfld_dsi_write_kbbc_profile (dsi_config, pipe);
mdfld_dsi_write_gamma_setting (dsi_config, pipe);
@@ -253,7 +217,7 @@ void mdfld_dsi_brightness_init (struct mdfld_dsi_config * dsi_config, int pipe)
MDFLD_DSI_SEND_PACKAGE);
}
-/**
+/*
* Manage the mipi display brightness.
* TODO: refine this interface later
*/
@@ -262,8 +226,8 @@ void mdfld_dsi_brightness_control(struct drm_device *dev, int pipe, int level)
struct mdfld_dsi_pkg_sender *sender;
struct drm_psb_private *dev_priv;
struct mdfld_dsi_config *dsi_config;
- u32 gen_ctrl_val = 0;
- int p_type = TMD_VID;
+ u32 gen_ctrl_val;
+ int p_type;
if (!dev || (pipe != 0 && pipe != 2)) {
dev_err(dev->dev, "Invalid parameter\n");
@@ -288,7 +252,8 @@ void mdfld_dsi_brightness_control(struct drm_device *dev, int pipe, int level)
gen_ctrl_val = ((level * 0xff) / MDFLD_DSI_BRIGHTNESS_MAX_LEVEL) & 0xff;
- dev_dbg(dev->dev, "pipe = %d, gen_ctrl_val = %d. \n", pipe, gen_ctrl_val);
+ dev_dbg(dev->dev,
+ "pipe = %d, gen_ctrl_val = %d. \n", pipe, gen_ctrl_val);
if(p_type == TMD_VID || p_type == TMD_CMD){
/* Set display backlight value */
@@ -344,7 +309,7 @@ void mdfld_dsi_controller_shutdown(struct mdfld_dsi_config * dsi_config, int pip
if(!(REG_READ(MIPIA_DEVICE_READY_REG + reg_offset) & DSI_DEVICE_READY))
goto shutdown_out;
- /*send shut down package, clean packet send bit first*/
+ /* Send shut down package, clean packet send bit first */
if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) {
REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset),
(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) | DSI_INTR_STATE_SPL_PKG_SENT));
@@ -432,6 +397,53 @@ startup_out:
gma_power_end(dev);
}
+
+static int mdfld_dsi_get_panel_status(struct mdfld_dsi_config *dsi_config,
+ u8 dcs,
+ u32 *data,
+ u8 transmission)
+{
+ struct mdfld_dsi_pkg_sender *sender
+ = mdfld_dsi_get_pkg_sender(dsi_config);
+
+ if (!sender || !data) {
+ DRM_ERROR("Invalid parameter\n");
+ return -EINVAL;
+ }
+
+ if (transmission == MDFLD_DSI_HS_TRANSMISSION)
+ return mdfld_dsi_read_mcs_hs(sender, dcs, data, 1);
+ else if (transmission == MDFLD_DSI_LP_TRANSMISSION)
+ return mdfld_dsi_read_mcs_lp(sender, dcs, data, 1);
+ else
+ return -EINVAL;
+}
+
+int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config,
+ u32 *mode,
+ u8 transmission)
+{
+ if (!dsi_config || !mode) {
+ DRM_ERROR("Invalid parameter\n");
+ return -EINVAL;
+ }
+
+ return mdfld_dsi_get_panel_status(dsi_config, 0x0a, mode, transmission);
+}
+
+int mdfld_dsi_get_diagnostic_result(struct mdfld_dsi_config *dsi_config,
+ u32 *result,
+ u8 transmission)
+{
+ if (!dsi_config || !result) {
+ DRM_ERROR("Invalid parameter\n");
+ return -EINVAL;
+ }
+
+ return mdfld_dsi_get_panel_status(dsi_config, 0x0f, result,
+ transmission);
+}
+
/*
* NOTE: this function was used by OSPM.
* TODO: will be removed later, should work out display interfaces for OSPM
@@ -459,14 +471,18 @@ static void mdfld_dsi_connector_restore(struct drm_connector * connector)
static enum drm_connector_status mdfld_dsi_connector_detect(struct drm_connector * connector, bool force)
{
- return connector_status_connected;
+ struct psb_intel_output *psb_output
+ = to_psb_intel_output(connector);
+ struct mdfld_dsi_connector *dsi_connector
+ = MDFLD_DSI_CONNECTOR(psb_output);
+ return dsi_connector->status;
}
-static int mdfld_dsi_connector_set_property(struct drm_connector * connector,
- struct drm_property * property,
- uint64_t value)
+static int mdfld_dsi_connector_set_property(struct drm_connector *connector,
+ struct drm_property *property,
+ uint64_t value)
{
- struct drm_encoder * encoder = connector->encoder;
+ struct drm_encoder *encoder = connector->encoder;
if (!strcmp(property->name, "scaling mode") && encoder) {
struct psb_intel_crtc * psb_crtc = to_psb_intel_crtc(encoder->crtc);
@@ -633,9 +649,12 @@ static void mdfld_dsi_connector_dpms(struct drm_connector *connector, int mode)
}
/* Then check all display panels + monitors status */
+ /* Make sure that the Display (B) sub-system status isn't i3 when
+ * R/W the DC register, otherwise "Fabric error" issue would occur
+ * during S0i3 state. */
if(!panel_on && !panel_on2 && !(REG_READ(HDMIB_CONTROL)
& HDMIB_PORT_EN)) {
- /*request rpm idle*/
+ /* Request rpm idle */
if(dev_priv->rpm_enabled)
pm_request_idle(&dev->pdev->dev);
}
@@ -652,8 +671,8 @@ static void mdfld_dsi_connector_dpms(struct drm_connector *connector, int mode)
#endif
}
-static struct drm_encoder * mdfld_dsi_connector_best_encoder(
- struct drm_connector * connector)
+static struct drm_encoder *mdfld_dsi_connector_best_encoder(
+ struct drm_connector *connector)
{
struct psb_intel_output * psb_output = to_psb_intel_output(connector);
struct mdfld_dsi_connector * dsi_connector = MDFLD_DSI_CONNECTOR(psb_output);
@@ -755,16 +774,6 @@ mdfld_dsi_get_configuration_mode(struct mdfld_dsi_config * dsi_config, int pipe)
mode->vtotal = mode->vdisplay + \
((ti->vblank_hi << 8) | ti->vblank_lo);
mode->clock = ti->pixel_clock * 10;
-
- dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay);
- dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay);
- dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start);
- dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end);
- dev_dbg(dev->dev, "htotal is %d\n", mode->htotal);
- dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start);
- dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end);
- dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal);
- dev_dbg(dev->dev, "clock is %d\n", mode->clock);
} else {
if(dsi_config->type == MDFLD_DSI_ENCODER_DPI) {
if (mdfld_get_panel_type(dev, pipe) == TMD_VID) {
@@ -810,6 +819,44 @@ mdfld_dsi_get_configuration_mode(struct mdfld_dsi_config * dsi_config, int pipe)
return mode;
}
+int mdfld_dsi_panel_reset(int pipe)
+{
+ unsigned gpio;
+ int ret = 0;
+
+ switch (pipe) {
+ case 0:
+ gpio = 128;
+ break;
+ case 2:
+ gpio = 34;
+ break;
+ default:
+ DRM_ERROR("Invalid output\n");
+ return -EINVAL;
+ }
+
+ ret = gpio_request(gpio, "gfx");
+ if (ret) {
+ DRM_ERROR("gpio_rqueset failed\n");
+ return ret;
+ }
+
+ ret = gpio_direction_output(gpio, 1);
+ if (ret) {
+ DRM_ERROR("gpio_direction_output failed\n");
+ goto gpio_error;
+ }
+
+ gpio_get_value(128);
+
+gpio_error:
+ if (gpio_is_valid(gpio))
+ gpio_free(gpio);
+
+ return ret;
+}
+
/*
* MIPI output init
* @dev drm device
@@ -819,9 +866,9 @@ mdfld_dsi_get_configuration_mode(struct mdfld_dsi_config * dsi_config, int pipe)
* Do the initialization of a MIPI output, including create DRM mode objects
* initialization of DSI output on @pipe
*/
-void mdfld_dsi_output_init(struct drm_device * dev,
+void mdfld_dsi_output_init(struct drm_device *dev,
int pipe,
- struct mdfld_dsi_config * config,
+ struct mdfld_dsi_config *config,
struct panel_funcs* p_cmd_funcs,
struct panel_funcs* p_vid_funcs)
{
@@ -869,7 +916,7 @@ void mdfld_dsi_output_init(struct drm_device * dev,
dsi_config->changed = 1;
dsi_config->dev = dev;
- /*init fixed mode basing on DSI config type*/
+ /* Init fixed mode basing on DSI config type */
if(dsi_config->type == MDFLD_DSI_ENCODER_DBI) {
dsi_config->fixed_mode = p_cmd_funcs->get_config_mode(dev);
if(p_cmd_funcs->get_panel_info(dev, pipe, &dsi_panel_info))
@@ -917,12 +964,18 @@ void mdfld_dsi_output_init(struct drm_device * dev,
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
- /*attach properties*/
+ /* Attach properties */
drm_connector_attach_property(connector, dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN);
drm_connector_attach_property(connector, dev_priv->backlight_property, MDFLD_DSI_BRIGHTNESS_MAX_LEVEL);
- /*init DBI & DPI encoders*/
- if(p_cmd_funcs) {
+ /* Init DSI package sender on this output */
+ if (mdfld_dsi_pkg_sender_init(dsi_connector, pipe)) {
+ DRM_ERROR("Package Sender initialization failed on pipe %d\n", pipe);
+ goto dsi_init_err0;
+ }
+
+ /* Init DBI & DPI encoders */
+ if (p_cmd_funcs) {
encoder = mdfld_dsi_dbi_init(dev, dsi_connector, p_cmd_funcs);
if(!encoder) {
dev_err(dev->dev, "Create DBI encoder failed\n");
@@ -930,12 +983,6 @@ void mdfld_dsi_output_init(struct drm_device * dev,
}
encoder->private = dsi_config;
dsi_config->encoders[MDFLD_DSI_ENCODER_DBI] = encoder;
- if(pipe == 2)
- dev_priv->encoder2 = encoder;
-
- if(pipe == 0)
- dev_priv->encoder0 = encoder;
-
}
if(p_vid_funcs) {
@@ -946,31 +993,16 @@ void mdfld_dsi_output_init(struct drm_device * dev,
}
encoder->private = dsi_config;
dsi_config->encoders[MDFLD_DSI_ENCODER_DPI] = encoder;
-
- if(pipe == 2)
- dev_priv->encoder2 = encoder;
-
- if(pipe == 0)
- dev_priv->encoder0 = encoder;
}
drm_sysfs_connector_add(connector);
-
- /*init DSI package sender on this output*/
- if(mdfld_dsi_pkg_sender_init(dsi_connector, pipe)) {
- dev_err(dev->dev,
- "Package Sender initialization failed on pipe %d\n",
- pipe);
- goto dsi_init_err2;
- }
-
- dev_dbg(dev->dev, "successfully\n");
return;
/*TODO: add code to destroy outputs on error*/
-dsi_init_err2:
- drm_sysfs_connector_remove(connector);
dsi_init_err1:
+ /*destroy sender*/
+ mdfld_dsi_pkg_sender_destroy(dsi_connector->pkg_sender);
+
drm_connector_cleanup(connector);
kfree(dsi_config->fixed_mode);
kfree(dsi_config);
diff --git a/drivers/staging/gma500/mdfld_dsi_output.h b/drivers/staging/gma500/mdfld_dsi_output.h
index 4300f10..4699267 100644
--- a/drivers/staging/gma500/mdfld_dsi_output.h
+++ b/drivers/staging/gma500/mdfld_dsi_output.h
@@ -42,202 +42,6 @@
#include <asm/mrst.h>
-#define DRM_MODE_ENCODER_MIPI 5
-
-/* Medfield DSI controller registers */
-
-#define MIPIA_DEVICE_READY_REG 0xb000
-#define MIPIA_INTR_STAT_REG 0xb004
-#define MIPIA_INTR_EN_REG 0xb008
-#define MIPIA_DSI_FUNC_PRG_REG 0xb00c
-#define MIPIA_HS_TX_TIMEOUT_REG 0xb010
-#define MIPIA_LP_RX_TIMEOUT_REG 0xb014
-#define MIPIA_TURN_AROUND_TIMEOUT_REG 0xb018
-#define MIPIA_DEVICE_RESET_TIMER_REG 0xb01c
-#define MIPIA_DPI_RESOLUTION_REG 0xb020
-#define MIPIA_DBI_FIFO_THROTTLE_REG 0xb024
-#define MIPIA_HSYNC_COUNT_REG 0xb028
-#define MIPIA_HBP_COUNT_REG 0xb02c
-#define MIPIA_HFP_COUNT_REG 0xb030
-#define MIPIA_HACTIVE_COUNT_REG 0xb034
-#define MIPIA_VSYNC_COUNT_REG 0xb038
-#define MIPIA_VBP_COUNT_REG 0xb03c
-#define MIPIA_VFP_COUNT_REG 0xb040
-#define MIPIA_HIGH_LOW_SWITCH_COUNT_REG 0xb044
-#define MIPIA_DPI_CONTROL_REG 0xb048
-#define MIPIA_DPI_DATA_REG 0xb04c
-#define MIPIA_INIT_COUNT_REG 0xb050
-#define MIPIA_MAX_RETURN_PACK_SIZE_REG 0xb054
-#define MIPIA_VIDEO_MODE_FORMAT_REG 0xb058
-#define MIPIA_EOT_DISABLE_REG 0xb05c
-#define MIPIA_LP_BYTECLK_REG 0xb060
-#define MIPIA_LP_GEN_DATA_REG 0xb064
-#define MIPIA_HS_GEN_DATA_REG 0xb068
-#define MIPIA_LP_GEN_CTRL_REG 0xb06c
-#define MIPIA_HS_GEN_CTRL_REG 0xb070
-#define MIPIA_GEN_FIFO_STAT_REG 0xb074
-#define MIPIA_HS_LS_DBI_ENABLE_REG 0xb078
-#define MIPIA_DPHY_PARAM_REG 0xb080
-#define MIPIA_DBI_BW_CTRL_REG 0xb084
-#define MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG 0xb088
-
-#define DSI_DEVICE_READY (0x1)
-#define DSI_POWER_STATE_ULPS_ENTER (0x2 << 1)
-#define DSI_POWER_STATE_ULPS_EXIT (0x1 << 1)
-#define DSI_POWER_STATE_ULPS_OFFSET (0x1)
-
-
-#define DSI_ONE_DATA_LANE (0x1)
-#define DSI_TWO_DATA_LANE (0x2)
-#define DSI_THREE_DATA_LANE (0X3)
-#define DSI_FOUR_DATA_LANE (0x4)
-#define DSI_DPI_VIRT_CHANNEL_OFFSET (0x3)
-#define DSI_DBI_VIRT_CHANNEL_OFFSET (0x5)
-#define DSI_DPI_COLOR_FORMAT_RGB565 (0x01 << 7)
-#define DSI_DPI_COLOR_FORMAT_RGB666 (0x02 << 7)
-#define DSI_DPI_COLOR_FORMAT_RGB666_UNPACK (0x03 << 7)
-#define DSI_DPI_COLOR_FORMAT_RGB888 (0x04 << 7)
-#define DSI_DBI_COLOR_FORMAT_OPTION2 (0x05 << 13)
-
-#define DSI_INTR_STATE_RXSOTERROR 1
-
-#define DSI_INTR_STATE_SPL_PKG_SENT (1 << 30)
-#define DSI_INTR_STATE_TE (1 << 31)
-
-#define DSI_HS_TX_TIMEOUT_MASK (0xffffff)
-
-#define DSI_LP_RX_TIMEOUT_MASK (0xffffff)
-
-#define DSI_TURN_AROUND_TIMEOUT_MASK (0x3f)
-
-#define DSI_RESET_TIMER_MASK (0xffff)
-
-#define DSI_DBI_FIFO_WM_HALF (0x0)
-#define DSI_DBI_FIFO_WM_QUARTER (0x1)
-#define DSI_DBI_FIFO_WM_LOW (0x2)
-
-#define DSI_DPI_TIMING_MASK (0xffff)
-
-#define DSI_INIT_TIMER_MASK (0xffff)
-
-#define DSI_DBI_RETURN_PACK_SIZE_MASK (0x3ff)
-
-#define DSI_LP_BYTECLK_MASK (0x0ffff)
-
-#define DSI_HS_CTRL_GEN_SHORT_W0 (0x03)
-#define DSI_HS_CTRL_GEN_SHORT_W1 (0x13)
-#define DSI_HS_CTRL_GEN_SHORT_W2 (0x23)
-#define DSI_HS_CTRL_GEN_R0 (0x04)
-#define DSI_HS_CTRL_GEN_R1 (0x14)
-#define DSI_HS_CTRL_GEN_R2 (0x24)
-#define DSI_HS_CTRL_GEN_LONG_W (0x29)
-#define DSI_HS_CTRL_MCS_SHORT_W0 (0x05)
-#define DSI_HS_CTRL_MCS_SHORT_W1 (0x15)
-#define DSI_HS_CTRL_MCS_R0 (0x06)
-#define DSI_HS_CTRL_MCS_LONG_W (0x39)
-#define DSI_HS_CTRL_VC_OFFSET (0x06)
-#define DSI_HS_CTRL_WC_OFFSET (0x08)
-
-#define DSI_FIFO_GEN_HS_DATA_FULL (1 << 0)
-#define DSI_FIFO_GEN_HS_DATA_HALF_EMPTY (1 << 1)
-#define DSI_FIFO_GEN_HS_DATA_EMPTY (1 << 2)
-#define DSI_FIFO_GEN_LP_DATA_FULL (1 << 8)
-#define DSI_FIFO_GEN_LP_DATA_HALF_EMPTY (1 << 9)
-#define DSI_FIFO_GEN_LP_DATA_EMPTY (1 << 10)
-#define DSI_FIFO_GEN_HS_CTRL_FULL (1 << 16)
-#define DSI_FIFO_GEN_HS_CTRL_HALF_EMPTY (1 << 17)
-#define DSI_FIFO_GEN_HS_CTRL_EMPTY (1 << 18)
-#define DSI_FIFO_GEN_LP_CTRL_FULL (1 << 24)
-#define DSI_FIFO_GEN_LP_CTRL_HALF_EMPTY (1 << 25)
-#define DSI_FIFO_GEN_LP_CTRL_EMPTY (1 << 26)
-#define DSI_FIFO_DBI_EMPTY (1 << 27)
-#define DSI_FIFO_DPI_EMPTY (1 << 28)
-
-#define DSI_DBI_HS_LP_SWITCH_MASK (0x1)
-
-#define DSI_HS_LP_SWITCH_COUNTER_OFFSET (0x0)
-#define DSI_LP_HS_SWITCH_COUNTER_OFFSET (0x16)
-
-#define DSI_DPI_CTRL_HS_SHUTDOWN (0x00000001)
-#define DSI_DPI_CTRL_HS_TURN_ON (0x00000002)
-
-/* Medfield DSI adapter registers */
-#define MIPIA_CONTROL_REG 0xb104
-#define MIPIA_DATA_ADD_REG 0xb108
-#define MIPIA_DATA_LEN_REG 0xb10c
-#define MIPIA_CMD_ADD_REG 0xb110
-#define MIPIA_CMD_LEN_REG 0xb114
-
-enum {
- MDFLD_DSI_ENCODER_DBI = 0,
- MDFLD_DSI_ENCODER_DPI,
-};
-
-enum {
- MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE = 1,
- MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_EVENTS = 2,
- MDFLD_DSI_VIDEO_BURST_MODE = 3,
-};
-
-#define DSI_DPI_COMPLETE_LAST_LINE (1 << 2)
-#define DSI_DPI_DISABLE_BTA (1 << 3)
-
-struct mdfld_dsi_connector_state {
- u32 mipi_ctrl_reg;
-};
-
-struct mdfld_dsi_encoder_state {
-
-};
-
-struct mdfld_dsi_connector {
- /*
- * This is ugly, but I have to use connector in it! :-(
- * FIXME: use drm_connector instead.
- */
- struct psb_intel_output base;
-
- int pipe;
- void *private;
- void *pkg_sender;
-};
-
-struct mdfld_dsi_encoder {
- struct drm_encoder base;
- void *private;
-};
-
-/*
- * DSI config, consists of one DSI connector, two DSI encoders.
- * DRM will pick up on DSI encoder basing on differents configs.
- */
-struct mdfld_dsi_config {
- struct drm_device *dev;
- struct drm_display_mode *fixed_mode;
- struct drm_display_mode *mode;
-
- struct mdfld_dsi_connector *connector;
- struct mdfld_dsi_encoder *encoders[DRM_CONNECTOR_MAX_ENCODER];
- struct mdfld_dsi_encoder *encoder;
-
- int changed;
-
- int bpp;
- int type;
- int lane_count;
- /*Virtual channel number for this encoder*/
- int channel_num;
- /*video mode configure*/
- int video_mode;
-
- int dvr_ic_inited;
-};
-
-#define MDFLD_DSI_CONNECTOR(psb_output) \
- (container_of(psb_output, struct mdfld_dsi_connector, base))
-
-#define MDFLD_DSI_ENCODER(encoder) \
- (container_of(encoder, struct mdfld_dsi_encoder, base))
static inline struct mdfld_dsi_config *
mdfld_dsi_get_config(struct mdfld_dsi_connector *connector)
@@ -323,5 +127,12 @@ extern void mdfld_dsi_output_init(struct drm_device *dev, int pipe,
struct panel_funcs *p_vid_funcs);
extern void mdfld_dsi_controller_init(struct mdfld_dsi_config *dsi_config,
int pipe);
+extern int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config,
+ u32 *mode,
+ u8 transmission);
+extern int mdfld_dsi_get_diagnostic_result(struct mdfld_dsi_config *dsi_config,
+ u32 *result,
+ u8 transmission);
+extern int mdfld_dsi_panel_reset(int pipe);
#endif /*__MDFLD_DSI_OUTPUT_H__*/
diff --git a/drivers/staging/gma500/mdfld_dsi_pkg_sender.c b/drivers/staging/gma500/mdfld_dsi_pkg_sender.c
index 745d4ad..9b96a5c 100644
--- a/drivers/staging/gma500/mdfld_dsi_pkg_sender.c
+++ b/drivers/staging/gma500/mdfld_dsi_pkg_sender.c
@@ -29,8 +29,11 @@
#include "mdfld_dsi_output.h"
#include "mdfld_dsi_pkg_sender.h"
#include "mdfld_dsi_dbi.h"
+#include "mdfld_dsi_dpi.h"
-#define MDFLD_DSI_DBI_FIFO_TIMEOUT 100
+#define MDFLD_DSI_DBI_FIFO_TIMEOUT 100
+#define MDFLD_DSI_MAX_RETURN_PACKET_SIZE 512
+#define MDFLD_DSI_READ_MAX_COUNT 5000
static const char * const dsi_errors[] = {
"RX SOT Error",
@@ -404,8 +407,10 @@ static int send_pkg_prepare(struct mdfld_dsi_pkg_sender *sender,
}
/* Wait for 120 milliseconds in case exit_sleep_mode just be sent */
- if (cmd == enter_sleep_mode)
+ if (cmd == DCS_ENTER_SLEEP_MODE) {
+ /*TODO: replace it with msleep later*/
mdelay(120);
+ }
return 0;
}
@@ -432,16 +437,18 @@ static int send_pkg_done(struct mdfld_dsi_pkg_sender *sender,
}
/* Update panel status */
- if (cmd == enter_sleep_mode) {
+ if (cmd == DCS_ENTER_SLEEP_MODE) {
sender->panel_mode |= MDFLD_DSI_PANEL_MODE_SLEEP;
/*TODO: replace it with msleep later*/
mdelay(120);
- } else if (cmd == exit_sleep_mode) {
+ } else if (cmd == DCS_EXIT_SLEEP_MODE) {
sender->panel_mode &= ~MDFLD_DSI_PANEL_MODE_SLEEP;
/*TODO: replace it with msleep later*/
mdelay(120);
- }
-
+ } else if (unlikely(cmd == DCS_SOFT_RESET)) {
+ /*TODO: replace it with msleep later*/
+ mdelay(5);
+ }
sender->status = MDFLD_DSI_PKG_SENDER_FREE;
return 0;
@@ -470,6 +477,9 @@ static int do_send_pkg(struct mdfld_dsi_pkg_sender *sender,
case MDFLD_DSI_PKG_GEN_SHORT_WRITE_0:
case MDFLD_DSI_PKG_GEN_SHORT_WRITE_1:
case MDFLD_DSI_PKG_GEN_SHORT_WRITE_2:
+ case MDFLD_DSI_PKG_GEN_READ_0:
+ case MDFLD_DSI_PKG_GEN_READ_1:
+ case MDFLD_DSI_PKG_GEN_READ_2:
ret = send_gen_short_pkg(sender, pkg);
break;
case MDFLD_DSI_PKG_GEN_LONG_WRITE:
@@ -477,6 +487,7 @@ static int do_send_pkg(struct mdfld_dsi_pkg_sender *sender,
break;
case MDFLD_DSI_PKG_MCS_SHORT_WRITE_0:
case MDFLD_DSI_PKG_MCS_SHORT_WRITE_1:
+ case MDFLD_DSI_PKG_MCS_READ:
ret = send_mcs_short_pkg(sender, pkg);
break;
case MDFLD_DSI_PKG_MCS_LONG_WRITE:
@@ -548,6 +559,7 @@ static int mdfld_dbi_cb_init(struct mdfld_dsi_pkg_sender *sender,
switch (pipe) {
case 0:
+ /* FIXME: Doesn't this collide with stolen space ? */
phys = pg->gtt_phys_start - 0x1000;
break;
case 2:
@@ -735,6 +747,292 @@ static int mdfld_dsi_send_gen_long(struct mdfld_dsi_pkg_sender *sender,
return 0;
}
+static int __read_panel_data(struct mdfld_dsi_pkg_sender *sender,
+ struct mdfld_dsi_pkg *pkg,
+ u32 *data,
+ u16 len)
+{
+ unsigned long flags;
+ struct drm_device *dev = sender->dev;
+ int i;
+ u32 gen_data_reg;
+ int retry = MDFLD_DSI_READ_MAX_COUNT;
+ u8 transmission = pkg->transmission_type;
+
+ /*
+ * do reading.
+ * 0) send out generic read request
+ * 1) polling read data avail interrupt
+ * 2) read data
+ */
+ spin_lock_irqsave(&sender->lock, flags);
+
+ REG_WRITE(sender->mipi_intr_stat_reg, 1 << 29);
+
+ if ((REG_READ(sender->mipi_intr_stat_reg) & (1 << 29)))
+ DRM_ERROR("Can NOT clean read data valid interrupt\n");
+
+ /*send out read request*/
+ send_pkg(sender, pkg);
+
+ pkg_sender_put_pkg_locked(sender, pkg);
+
+ /*polling read data avail interrupt*/
+ while (retry && !(REG_READ(sender->mipi_intr_stat_reg) & (1 << 29))) {
+ udelay(100);
+ retry--;
+ }
+
+ if (!retry) {
+ spin_unlock_irqrestore(&sender->lock, flags);
+ return -ETIMEDOUT;
+ }
+
+ REG_WRITE(sender->mipi_intr_stat_reg, (1 << 29));
+
+ /*read data*/
+ if (transmission == MDFLD_DSI_HS_TRANSMISSION)
+ gen_data_reg = sender->mipi_hs_gen_data_reg;
+ else if (transmission == MDFLD_DSI_LP_TRANSMISSION)
+ gen_data_reg = sender->mipi_lp_gen_data_reg;
+ else {
+ DRM_ERROR("Unknown transmission");
+ spin_unlock_irqrestore(&sender->lock, flags);
+ return -EINVAL;
+ }
+
+ for (i=0; i<len; i++)
+ *(data + i) = REG_READ(gen_data_reg);
+
+ spin_unlock_irqrestore(&sender->lock, flags);
+
+ return 0;
+}
+
+static int mdfld_dsi_read_gen(struct mdfld_dsi_pkg_sender *sender,
+ u8 param0,
+ u8 param1,
+ u8 param_num,
+ u32 *data,
+ u16 len,
+ u8 transmission)
+{
+ struct mdfld_dsi_pkg *pkg;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sender->lock, flags);
+
+ pkg = pkg_sender_get_pkg_locked(sender);
+
+ spin_unlock_irqrestore(&sender->lock,flags);
+
+ if (!pkg) {
+ dev_err(sender->dev->dev, "No pkg memory\n");
+ return -ENOMEM;
+ }
+
+ switch (param_num) {
+ case 0:
+ pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_0;
+ pkg->pkg.short_pkg.cmd = 0;
+ pkg->pkg.short_pkg.param = 0;
+ break;
+ case 1:
+ pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_1;
+ pkg->pkg.short_pkg.cmd = param0;
+ pkg->pkg.short_pkg.param = 0;
+ break;
+ case 2:
+ pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_2;
+ pkg->pkg.short_pkg.cmd = param0;
+ pkg->pkg.short_pkg.param = param1;
+ break;
+ }
+
+ pkg->transmission_type = transmission;
+
+ INIT_LIST_HEAD(&pkg->entry);
+
+ return __read_panel_data(sender, pkg, data, len);
+}
+
+static int mdfld_dsi_read_mcs(struct mdfld_dsi_pkg_sender *sender,
+ u8 cmd,
+ u32 *data,
+ u16 len,
+ u8 transmission)
+{
+ struct mdfld_dsi_pkg *pkg;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sender->lock, flags);
+
+ pkg = pkg_sender_get_pkg_locked(sender);
+
+ spin_unlock_irqrestore(&sender->lock, flags);
+
+ if (!pkg) {
+ dev_err(sender->dev->dev, "No pkg memory\n");
+ return -ENOMEM;
+ }
+
+ pkg->pkg_type = MDFLD_DSI_PKG_MCS_READ;
+ pkg->pkg.short_pkg.cmd = cmd;
+ pkg->pkg.short_pkg.param = 0;
+
+ pkg->transmission_type = transmission;
+
+ INIT_LIST_HEAD(&pkg->entry);
+
+ return __read_panel_data(sender, pkg, data, len);
+}
+
+void dsi_controller_dbi_init(struct mdfld_dsi_config * dsi_config, int pipe)
+{
+ struct drm_device * dev = dsi_config->dev;
+ u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0;
+ int lane_count = dsi_config->lane_count;
+ u32 val = 0;
+
+ /*un-ready device*/
+ REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000);
+
+ /*init dsi adapter before kicking off*/
+ REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018);
+
+ /*TODO: figure out how to setup these registers*/
+ REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408);
+ REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), 0x000a0014);
+ REG_WRITE((MIPIA_DBI_BW_CTRL_REG + reg_offset), 0x00000400);
+ REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000001);
+ REG_WRITE((MIPIA_HS_LS_DBI_ENABLE_REG + reg_offset), 0x00000000);
+
+ /*enable all interrupts*/
+ REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff);
+ /*max value: 20 clock cycles of txclkesc*/
+ REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x0000001f);
+ /*min 21 txclkesc, max: ffffh*/
+ REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0x0000ffff);
+ /*min: 7d0 max: 4e20*/
+ REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x00000fa0);
+
+ /*set up max return packet size*/
+ REG_WRITE((MIPIA_MAX_RETURN_PACK_SIZE_REG + reg_offset),
+ MDFLD_DSI_MAX_RETURN_PACKET_SIZE);
+
+ /*set up func_prg*/
+ val |= lane_count;
+ val |= (dsi_config->channel_num << DSI_DBI_VIRT_CHANNEL_OFFSET);
+ val |= DSI_DBI_COLOR_FORMAT_OPTION2;
+ REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val);
+
+ REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), 0x3fffff);
+ REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff);
+
+ REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46);
+ REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000);
+ REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004);
+ REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001);
+}
+
+void dsi_controller_dpi_init(struct mdfld_dsi_config * dsi_config, int pipe)
+{
+ struct drm_device * dev = dsi_config->dev;
+ u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0;
+ int lane_count = dsi_config->lane_count;
+ struct mdfld_dsi_dpi_timing dpi_timing;
+ struct drm_display_mode * mode = dsi_config->mode;
+ u32 val = 0;
+
+ /*un-ready device*/
+ REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000);
+
+ /*init dsi adapter before kicking off*/
+ REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018);
+
+ /*enable all interrupts*/
+ REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff);
+
+ /*set up func_prg*/
+ val |= lane_count;
+ val |= dsi_config->channel_num << DSI_DPI_VIRT_CHANNEL_OFFSET;
+
+ switch(dsi_config->bpp) {
+ case 16:
+ val |= DSI_DPI_COLOR_FORMAT_RGB565;
+ break;
+ case 18:
+ val |= DSI_DPI_COLOR_FORMAT_RGB666;
+ break;
+ case 24:
+ val |= DSI_DPI_COLOR_FORMAT_RGB888;
+ break;
+ default:
+ DRM_ERROR("unsupported color format, bpp = %d\n", dsi_config->bpp);
+ }
+
+ REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val);
+
+ REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset),
+ (mode->vtotal * mode->htotal * dsi_config->bpp / (8 * lane_count)) & DSI_HS_TX_TIMEOUT_MASK);
+ REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff & DSI_LP_RX_TIMEOUT_MASK);
+
+ /*max value: 20 clock cycles of txclkesc*/
+ REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x14 & DSI_TURN_AROUND_TIMEOUT_MASK);
+
+ /*min 21 txclkesc, max: ffffh*/
+ REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0xffff & DSI_RESET_TIMER_MASK);
+
+ REG_WRITE((MIPIA_DPI_RESOLUTION_REG + reg_offset), mode->vdisplay << 16 | mode->hdisplay);
+
+ /*set DPI timing registers*/
+ mdfld_dsi_dpi_timing_calculation(mode, &dpi_timing, dsi_config->lane_count, dsi_config->bpp);
+
+ REG_WRITE((MIPIA_HSYNC_COUNT_REG + reg_offset), dpi_timing.hsync_count & DSI_DPI_TIMING_MASK);
+ REG_WRITE((MIPIA_HBP_COUNT_REG + reg_offset), dpi_timing.hbp_count & DSI_DPI_TIMING_MASK);
+ REG_WRITE((MIPIA_HFP_COUNT_REG + reg_offset), dpi_timing.hfp_count & DSI_DPI_TIMING_MASK);
+ REG_WRITE((MIPIA_HACTIVE_COUNT_REG + reg_offset), dpi_timing.hactive_count & DSI_DPI_TIMING_MASK);
+ REG_WRITE((MIPIA_VSYNC_COUNT_REG + reg_offset), dpi_timing.vsync_count & DSI_DPI_TIMING_MASK);
+ REG_WRITE((MIPIA_VBP_COUNT_REG + reg_offset), dpi_timing.vbp_count & DSI_DPI_TIMING_MASK);
+ REG_WRITE((MIPIA_VFP_COUNT_REG + reg_offset), dpi_timing.vfp_count & DSI_DPI_TIMING_MASK);
+
+ REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46);
+
+ /*min: 7d0 max: 4e20*/
+ REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x000007d0);
+
+ /*set up video mode*/
+ val = dsi_config->video_mode | DSI_DPI_COMPLETE_LAST_LINE;
+ REG_WRITE((MIPIA_VIDEO_MODE_FORMAT_REG + reg_offset), val);
+
+ REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000);
+
+ REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004);
+
+ /*TODO: figure out how to setup these registers*/
+ REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408);
+
+ REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), (0xa << 16) | 0x14);
+
+ /*set device ready*/
+ REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001);
+}
+
+static void dsi_controller_init(struct mdfld_dsi_config * dsi_config, int pipe)
+{
+ if (!dsi_config || ((pipe != 0) && (pipe != 2))) {
+ DRM_ERROR("Invalid parameters\n");
+ return;
+ }
+
+ if (dsi_config->type == MDFLD_DSI_ENCODER_DPI)
+ dsi_controller_dpi_init(dsi_config, pipe);
+ else if (dsi_config->type == MDFLD_DSI_ENCODER_DBI)
+ dsi_controller_dbi_init(dsi_config, pipe);
+ else
+ DRM_ERROR("Bad DSI encoder type\n");
+}
+
void mdfld_dsi_cmds_kick_out(struct mdfld_dsi_pkg_sender *sender)
{
process_pkg_list(sender);
@@ -774,7 +1072,7 @@ int mdfld_dsi_send_dcs(struct mdfld_dsi_pkg_sender *sender,
* If dcs is write_mem_start, send it directly using DSI adapter
* interface
*/
- if (dcs == write_mem_start) {
+ if (dcs == DCS_WRITE_MEM_START) {
if (!spin_trylock(&sender->lock))
return -EAGAIN;
@@ -944,6 +1242,69 @@ int mdfld_dsi_send_gen_long_lp(struct mdfld_dsi_pkg_sender *sender,
MDFLD_DSI_LP_TRANSMISSION, delay);
}
+int mdfld_dsi_read_gen_hs(struct mdfld_dsi_pkg_sender *sender,
+ u8 param0,
+ u8 param1,
+ u8 param_num,
+ u32 *data,
+ u16 len)
+{
+ if (!sender || !data || param_num < 0 || param_num > 2
+ || !data || !len) {
+ DRM_ERROR("Invalid parameters\n");
+ return -EINVAL;
+ }
+
+ return mdfld_dsi_read_gen(sender, param0, param1, param_num,
+ data, len, MDFLD_DSI_HS_TRANSMISSION);
+
+}
+
+int mdfld_dsi_read_gen_lp(struct mdfld_dsi_pkg_sender *sender,
+ u8 param0,
+ u8 param1,
+ u8 param_num,
+ u32 *data,
+ u16 len)
+{
+ if (!sender || !data || param_num < 0 || param_num > 2
+ || !data || !len) {
+ DRM_ERROR("Invalid parameters\n");
+ return -EINVAL;
+ }
+
+ return mdfld_dsi_read_gen(sender, param0, param1, param_num,
+ data, len, MDFLD_DSI_LP_TRANSMISSION);
+}
+
+int mdfld_dsi_read_mcs_hs(struct mdfld_dsi_pkg_sender *sender,
+ u8 cmd,
+ u32 *data,
+ u16 len)
+{
+ if (!sender || !data || !len) {
+ DRM_ERROR("Invalid parameters\n");
+ return -EINVAL;
+ }
+
+ return mdfld_dsi_read_mcs(sender, cmd, data, len,
+ MDFLD_DSI_HS_TRANSMISSION);
+}
+
+int mdfld_dsi_read_mcs_lp(struct mdfld_dsi_pkg_sender *sender,
+ u8 cmd,
+ u32 *data,
+ u16 len)
+{
+ if (!sender || !data || !len) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ return mdfld_dsi_read_mcs(sender, cmd, data, len,
+ MDFLD_DSI_LP_TRANSMISSION);
+}
+
int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector,
int pipe)
{
@@ -956,6 +1317,7 @@ int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector,
struct psb_gtt *pg = &dev_priv->gtt;
int i;
struct mdfld_dsi_pkg *pkg, *tmp;
+ u32 mipi_val = 0;
if (!dsi_connector) {
WARN_ON(1);
@@ -1018,7 +1380,7 @@ int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector,
pkg_sender->pipeconf_reg = PIPECCONF;
pkg_sender->dsplinoff_reg = DSPCLINOFF;
pkg_sender->dspsurf_reg = DSPCSURF;
- pkg_sender->pipestat_reg = 72024;
+ pkg_sender->pipestat_reg = PIPECSTAT;
pkg_sender->mipi_intr_stat_reg =
MIPIA_INTR_STAT_REG + MIPIC_REG_OFFSET;
@@ -1059,6 +1421,31 @@ int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector,
INIT_LIST_HEAD(&pkg->entry);
list_add_tail(&pkg->entry, &pkg_sender->free_list);
}
+
+ /*
+ * For video mode, don't enable DPI timing output here,
+ * will init the DPI timing output during mode setting.
+ */
+ if (dsi_config->type == MDFLD_DSI_ENCODER_DPI)
+ mipi_val = PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX;
+ else if (dsi_config->type == MDFLD_DSI_ENCODER_DBI)
+ mipi_val = PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX
+ | TE_TRIGGER_GPIO_PIN;
+ else
+ DRM_ERROR("Bad DSI encoder type\n");
+
+ if (pipe == 0) {
+ mipi_val |= 0x2;
+ REG_WRITE(MIPI, mipi_val);
+ REG_READ(MIPI);
+ } else if (pipe == 2) {
+ REG_WRITE(MIPI_C, mipi_val);
+ REG_READ(MIPI_C);
+ }
+
+ /*do dsi controller init*/
+ dsi_controller_init(dsi_config, pipe);
+
return 0;
pkg_alloc_err:
diff --git a/drivers/staging/gma500/mdfld_dsi_pkg_sender.h b/drivers/staging/gma500/mdfld_dsi_pkg_sender.h
index 296b1ea..f24abc7 100644
--- a/drivers/staging/gma500/mdfld_dsi_pkg_sender.h
+++ b/drivers/staging/gma500/mdfld_dsi_pkg_sender.h
@@ -36,9 +36,13 @@ enum {
MDFLD_DSI_PKG_GEN_SHORT_WRITE_0 = 0x03,
MDFLD_DSI_PKG_GEN_SHORT_WRITE_1 = 0x13,
MDFLD_DSI_PKG_GEN_SHORT_WRITE_2 = 0x23,
+ MDFLD_DSI_PKG_GEN_READ_0 = 0x04,
+ MDFLD_DSI_PKG_GEN_READ_1 = 0x14,
+ MDFLD_DSI_PKG_GEN_READ_2 = 0x24,
MDFLD_DSI_PKG_GEN_LONG_WRITE = 0x29,
MDFLD_DSI_PKG_MCS_SHORT_WRITE_0 = 0x05,
MDFLD_DSI_PKG_MCS_SHORT_WRITE_1 = 0x15,
+ MDFLD_DSI_PKG_MCS_READ = 0x06,
MDFLD_DSI_PKG_MCS_LONG_WRITE = 0x39,
};
@@ -132,6 +136,18 @@ struct mdfld_dsi_pkg_sender {
u32 mipi_cmd_len_reg;
};
+/* DCS definitions */
+#define DCS_SOFT_RESET 0x01
+#define DCS_ENTER_SLEEP_MODE 0x10
+#define DCS_EXIT_SLEEP_MODE 0x11
+#define DCS_SET_DISPLAY_OFF 0x28
+#define DCS_SET_DISPLAY_ON 0x29
+#define DCS_SET_COLUMN_ADDRESS 0x2a
+#define DCS_SET_PAGE_ADDRESS 0x2b
+#define DCS_WRITE_MEM_START 0x2c
+#define DCS_SET_TEAR_OFF 0x34
+#define DCS_SET_TEAR_ON 0x35
+
extern int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector,
int pipe);
extern void mdfld_dsi_pkg_sender_destroy(struct mdfld_dsi_pkg_sender *sender);
@@ -153,6 +169,16 @@ extern int mdfld_dsi_send_gen_long_hs(struct mdfld_dsi_pkg_sender *sender,
u32 *data, u32 len, int delay);
extern int mdfld_dsi_send_gen_long_lp(struct mdfld_dsi_pkg_sender *sender,
u32 *data, u32 len, int delay);
+
+extern int mdfld_dsi_read_gen_hs(struct mdfld_dsi_pkg_sender *sender,
+ u8 param0, u8 param1, u8 param_num, u32 *data, u16 len);
+extern int mdfld_dsi_read_gen_lp(struct mdfld_dsi_pkg_sender *sender,
+ u8 param0, u8 param1, u8 param_num, u32 *data, u16 len);
+extern int mdfld_dsi_read_mcs_hs(struct mdfld_dsi_pkg_sender *sender,
+ u8 cmd, u32 *data, u16 len);
+extern int mdfld_dsi_read_mcs_lp(struct mdfld_dsi_pkg_sender *sender,
+ u8 cmd, u32 *data, u16 len);
+
extern void mdfld_dsi_cmds_kick_out(struct mdfld_dsi_pkg_sender *sender);
#endif /* __MDFLD_DSI_PKG_SENDER_H__ */
diff --git a/drivers/staging/gma500/mdfld_intel_display.c b/drivers/staging/gma500/mdfld_intel_display.c
index fa84990..ac74a8d 100644
--- a/drivers/staging/gma500/mdfld_intel_display.c
+++ b/drivers/staging/gma500/mdfld_intel_display.c
@@ -140,7 +140,6 @@ static int mdfld_intel_crtc_cursor_set(struct drm_crtc *crtc,
uint32_t width, uint32_t height)
{
struct drm_device *dev = crtc->dev;
- struct drm_psb_private * dev_priv = (struct drm_psb_private *)dev->dev_private;
struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
int pipe = psb_intel_crtc->pipe;
uint32_t control = CURACNTR;
@@ -263,7 +262,7 @@ static int mdfld_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
case 0:
#ifndef CONFIG_MDFLD_DSI_DPU
if (!(dev_priv->dsr_fb_update & MDFLD_DSR_CURSOR_0))
- mdfld_dsi_dbi_exit_dsr (dev, MDFLD_DSR_CURSOR_0, 0, 0);
+ mdfld_dsi_dbi_exit_dsr (dev, MDFLD_DSR_CURSOR_0);
#else /*CONFIG_MDFLD_DSI_DPU*/
rect.x = x;
rect.y = y;
@@ -279,7 +278,7 @@ static int mdfld_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
case 2:
#ifndef CONFIG_MDFLD_DSI_DPU
if (!(dev_priv->dsr_fb_update & MDFLD_DSR_CURSOR_2))
- mdfld_dsi_dbi_exit_dsr (dev, MDFLD_DSR_CURSOR_2, 0, 0);
+ mdfld_dsi_dbi_exit_dsr (dev, MDFLD_DSR_CURSOR_2);
#else /*CONFIG_MDFLD_DSI_DPU*/
mdfld_dbi_dpu_report_damage(dev, MDFLD_CURSORC, &rect);
mdfld_dpu_exit_dsr(dev);
@@ -354,7 +353,6 @@ int mdfld__intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_f
/* struct drm_i915_master_private *master_priv; */
struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
- struct psb_intel_mode_device *mode_dev = psb_intel_crtc->mode_dev;
int pipe = psb_intel_crtc->pipe;
unsigned long start, offset;
int dsplinoff = DSPALINOFF;
diff --git a/drivers/staging/gma500/mdfld_output.c b/drivers/staging/gma500/mdfld_output.c
index 7e11401..ffa2c1f 100644
--- a/drivers/staging/gma500/mdfld_output.c
+++ b/drivers/staging/gma500/mdfld_output.c
@@ -100,7 +100,6 @@ static int init_panel(struct drm_device *dev, int mipi_pipe, int p_type)
mdfld_dsi_output_init(dev, mipi_pipe, NULL, p_cmd_funcs, NULL);
break;
case PYR_VID:
- /*pyr_vid_init(dev, p_vid_funcs); */
mdfld_dsi_output_init(dev, mipi_pipe, NULL, NULL, p_vid_funcs);
break;
case TPO: /* TPO panel supports both cmd & vid interfaces */
@@ -135,10 +134,15 @@ int mdfld_output_init(struct drm_device *dev)
dev_info(dev->dev, "panel 1: type is %d\n", type);
init_panel(dev, 0, type);
+#ifdef CONFIG_MDFD_DUAL_MIPI
/* MIPI panel 2 */
type = mdfld_get_panel_type(dev, 2);
dev_info(dev->dev, "panel 2: type is %d\n", type);
init_panel(dev, 2, type);
-
+#endif
+#ifdef CONFIG_MDFD_HDMI
+ /* HDMI panel */
+ init_panel(dev, 0, HDMI);
+#endif
return 0;
}
diff --git a/drivers/staging/gma500/mdfld_output.h b/drivers/staging/gma500/mdfld_output.h
index 70f2302a..e747fdb 100644
--- a/drivers/staging/gma500/mdfld_output.h
+++ b/drivers/staging/gma500/mdfld_output.h
@@ -28,47 +28,6 @@
#ifndef MDFLD_OUTPUT_H
#define MDFLD_OUTPUT_H
-#include "psb_drv.h"
-
-/* Panel types */
-enum {
- TPO_CMD,
- TPO_VID,
- TMD_CMD,
- TMD_VID,
- PYR_CMD,
- PYR_VID,
- TPO,
- TMD,
- PYR,
- HDMI,
- GCT_DETECT
-};
-
-/* Junk that belongs elsewhere */
-#define TPO_PANEL_WIDTH 84
-#define TPO_PANEL_HEIGHT 46
-#define TMD_PANEL_WIDTH 39
-#define TMD_PANEL_HEIGHT 71
-#define PYR_PANEL_WIDTH 53
-#define PYR_PANEL_HEIGHT 95
-
-/* Panel interface */
-struct panel_info {
- u32 width_mm;
- u32 height_mm;
-};
-
-struct mdfld_dsi_dbi_output;
-
-struct panel_funcs {
- const struct drm_encoder_funcs *encoder_funcs;
- const struct drm_encoder_helper_funcs *encoder_helper_funcs;
- struct drm_display_mode *(*get_config_mode) (struct drm_device *);
- void (*update_fb) (struct mdfld_dsi_dbi_output *, int);
- int (*get_panel_info) (struct drm_device *, int, struct panel_info *);
-};
-
int mdfld_output_init(struct drm_device *dev);
int mdfld_panel_dpi(struct drm_device *dev);
int mdfld_get_panel_type(struct drm_device *dev, int pipe);
diff --git a/drivers/staging/gma500/mdfld_pyr_cmd.c b/drivers/staging/gma500/mdfld_pyr_cmd.c
index 0d89384..5f38e8d 100644
--- a/drivers/staging/gma500/mdfld_pyr_cmd.c
+++ b/drivers/staging/gma500/mdfld_pyr_cmd.c
@@ -188,7 +188,7 @@ static void pyr_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config,
dev_dbg(dev->dev, "Init DBI interface on pipe %d...\n", pipe);
- /* In-ready device */
+ /* Un-ready device */
REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000);
/* Init dsi adapter before kicking off */
@@ -394,25 +394,13 @@ static void pyr_dsi_dbi_dpms(struct drm_encoder *encoder, int mode)
struct mdfld_dsi_dbi_output *dbi_output =
MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
struct drm_device *dev = dbi_output->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- static bool bdispoff;
dev_dbg(dev->dev, "%s\n", (mode == DRM_MODE_DPMS_ON ? "on" : "off"));
- if (mode == DRM_MODE_DPMS_ON) {
- if (/*gbgfxsuspended && */bdispoff) {
- bdispoff = false;
- dev_priv->dispstatus = true;
- /*gbgfxsuspended = false;
- */
- mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_2D_3D, 0, 0);
- }
+ if (mode == DRM_MODE_DPMS_ON)
pyr_dsi_dbi_set_power(encoder, true);
- } else {
- bdispoff = true;
- dev_priv->dispstatus = false;
+ else
pyr_dsi_dbi_set_power(encoder, false);
- }
}
/*
diff --git a/drivers/staging/gma500/mdfld_tmd_vid.c b/drivers/staging/gma500/mdfld_tmd_vid.c
index b29c905..affdc09 100644
--- a/drivers/staging/gma500/mdfld_tmd_vid.c
+++ b/drivers/staging/gma500/mdfld_tmd_vid.c
@@ -114,6 +114,66 @@ static int tmd_vid_get_panel_info(struct drm_device *dev,
return 0;
}
+/*
+ * mdfld_init_TMD_MIPI - initialise a TMD interface
+ * @dsi_config: configuration
+ * @pipe: pipe to configure
+ *
+ * This function is called only by mrst_dsi_mode_set and
+ * restore_display_registers. since this function does not
+ * acquire the mutex, it is important that the calling function
+ * does!
+ */
+
+
+static void mdfld_dsi_tmd_drv_ic_init(struct mdfld_dsi_config *dsi_config,
+ int pipe)
+{
+ static u32 tmd_cmd_mcap_off[] = {0x000000b2};
+ static u32 tmd_cmd_enable_lane_switch[] = {0x000101ef};
+ static u32 tmd_cmd_set_lane_num[] = {0x006360ef};
+ static u32 tmd_cmd_pushing_clock0[] = {0x00cc2fef};
+ static u32 tmd_cmd_pushing_clock1[] = {0x00dd6eef};
+ static u32 tmd_cmd_set_mode[] = {0x000000b3};
+ static u32 tmd_cmd_set_sync_pulse_mode[] = {0x000961ef};
+ static u32 tmd_cmd_set_column[] = {0x0100002a, 0x000000df};
+ static u32 tmd_cmd_set_page[] = {0x0300002b, 0x00000055};
+ static u32 tmd_cmd_set_video_mode[] = {0x00000153};
+ /*no auto_bl,need add in furture*/
+ static u32 tmd_cmd_enable_backlight[] = {0x00005ab4};
+ static u32 tmd_cmd_set_backlight_dimming[] = {0x00000ebd};
+
+ struct mdfld_dsi_pkg_sender *sender
+ = mdfld_dsi_get_pkg_sender(dsi_config);
+
+ DRM_INFO("Enter mdfld init TMD MIPI display.\n");
+
+ if (!sender) {
+ DRM_ERROR("Cannot get sender\n");
+ return;
+ }
+
+ if (dsi_config->dvr_ic_inited)
+ return;
+
+ msleep(3);
+
+ mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_mcap_off, 1, 0);
+ mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_lane_switch, 1, 0);
+ mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_lane_num, 1, 0);
+ mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_pushing_clock0, 1, 0);
+ mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_pushing_clock1, 1, 0);
+ mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_mode, 1, 0);
+ mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_sync_pulse_mode, 1, 0);
+ mdfld_dsi_send_mcs_long_lp(sender, tmd_cmd_set_column, 2, 0);
+ mdfld_dsi_send_mcs_long_lp(sender, tmd_cmd_set_page, 2, 0);
+ mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_video_mode, 1, 0);
+ mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_backlight, 1, 0);
+ mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_backlight_dimming, 1, 0);
+
+ dsi_config->dvr_ic_inited = 1;
+}
+
/* TMD DPI encoder helper funcs */
static const struct drm_encoder_helper_funcs
mdfld_tpo_dpi_encoder_helper_funcs = {
@@ -141,4 +201,6 @@ void tmd_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs)
p_funcs->get_config_mode = &tmd_vid_get_config_mode;
p_funcs->update_fb = NULL;
p_funcs->get_panel_info = tmd_vid_get_panel_info;
+ p_funcs->reset = mdfld_dsi_panel_reset;
+ p_funcs->drv_ic_init = mdfld_dsi_tmd_drv_ic_init;
}
diff --git a/drivers/staging/gma500/mdfld_tpo_cmd.c b/drivers/staging/gma500/mdfld_tpo_cmd.c
index d2e1818..4cf7647 100644
--- a/drivers/staging/gma500/mdfld_tpo_cmd.c
+++ b/drivers/staging/gma500/mdfld_tpo_cmd.c
@@ -126,11 +126,15 @@ static void mdfld_dsi_dbi_set_power(struct drm_encoder *encoder, bool on)
struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
struct mdfld_dsi_dbi_output *dbi_output =
MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
- /*struct drm_device *dev = dbi_output->dev;*/
+ struct mdfld_dsi_config *dsi_config =
+ mdfld_dsi_encoder_get_config(dsi_encoder);
+ struct mdfld_dsi_pkg_sender *sender =
+ mdfld_dsi_encoder_get_pkg_sender(dsi_encoder);
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
u32 reg_offset = 0;
int pipe = (dbi_output->channel_num == 0) ? 0 : 2;
+ u32 data = 0;
dev_dbg(dev->dev, "pipe %d : %s, panel on: %s\n",
pipe, on ? "On" : "Off",
@@ -190,9 +194,33 @@ static void mdfld_dsi_dbi_set_power(struct drm_encoder *encoder, bool on)
}
}
+ /*
+ * FIXME: this is a WA for TPO panel crash on DPMS on & off around
+ * 83 times. the root cause of this issue is that Booster in
+ * drvIC crashed. Add this WA so that we can resume the driver IC
+ * once we found that booster has a fault
+ */
+ mdfld_dsi_get_power_mode(dsi_config,
+ &data,
+ MDFLD_DSI_HS_TRANSMISSION);
+
+ if (on && data && !(data & (1 << 7))) {
+ /* Soft reset */
+ mdfld_dsi_send_dcs(sender,
+ DCS_SOFT_RESET,
+ NULL,
+ 0,
+ CMD_DATA_SRC_PIPE,
+ MDFLD_DSI_SEND_PACKAGE);
+
+ /* Init drvIC */
+ if (dbi_output->p_funcs->drv_ic_init)
+ dbi_output->p_funcs->drv_ic_init(dsi_config,
+ pipe);
+ }
+
out_err:
gma_power_end(dev);
-
if (ret)
dev_err(dev->dev, "failed\n");
}
@@ -253,14 +281,6 @@ static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder,
return;
}
- /* Set up pipe related registers */
- REG_WRITE(mipi_reg, mipi_val);
- REG_READ(mipi_reg);
-
- mdfld_dsi_controller_dbi_init(dsi_config, pipe);
-
- msleep(20);
-
REG_WRITE(dspcntr_reg, dspcntr_val);
REG_READ(dspcntr_reg);
@@ -268,7 +288,7 @@ static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder,
msleep(20);
/* Send exit_sleep_mode DCS */
- ret = mdfld_dsi_dbi_send_dcs(dsi_output, exit_sleep_mode,
+ ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_EXIT_SLEEP_MODE,
NULL, 0, CMD_DATA_SRC_SYSTEM_MEM);
if (ret) {
dev_err(dev->dev, "sent exit_sleep_mode faild\n");
@@ -276,7 +296,7 @@ static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder,
}
/* Send set_tear_on DCS */
- ret = mdfld_dsi_dbi_send_dcs(dsi_output, set_tear_on,
+ ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_SET_TEAR_ON,
¶m, 1, CMD_DATA_SRC_SYSTEM_MEM);
if (ret) {
dev_err(dev->dev, "%s - sent set_tear_on faild\n", __func__);
@@ -284,11 +304,6 @@ static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder,
}
/* Do some init stuff */
- mdfld_dsi_brightness_init(dsi_config, pipe);
-
- mdfld_dsi_gen_fifo_ready(dev, (MIPIA_GEN_FIFO_STAT_REG + reg_offset),
- HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY);
-
REG_WRITE(pipeconf_reg, pipeconf_val | PIPEACONF_DSR);
REG_READ(pipeconf_reg);
@@ -375,23 +390,24 @@ static void mdfld_dsi_dbi_dpms(struct drm_encoder *encoder, int mode)
* if everything goes right, hw_begin will resume them all
* during set_power.
*/
- if (bdispoff)
- mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_2D_3D, 0, 0);
+ if (bdispoff /* FIXME && gbgfxsuspended */) {
+ mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_2D_3D);
+ bdispoff = false;
+ dev_priv->dispstatus = true;
+ }
mdfld_dsi_dbi_set_power(encoder, true);
/* FIXME if (gbgfxsuspended)
gbgfxsuspended = false; */
- bdispoff = false;
- dev_priv->dispstatus = true;
} else {
/*
* I am not sure whether this is the perfect place to
* turn rpm on since we still have a lot of CRTC turnning
* on work to do.
*/
- mdfld_dsi_dbi_set_power(encoder, false);
bdispoff = true;
dev_priv->dispstatus = false;
+ mdfld_dsi_dbi_set_power(encoder, false);
}
}
@@ -446,7 +462,7 @@ static void mdfld_dsi_dbi_update_fb(struct mdfld_dsi_dbi_output *dbi_output,
REG_READ(dspsurf_reg);
mdfld_dsi_send_dcs(sender,
- write_mem_start,
+ DCS_WRITE_MEM_START,
NULL,
0,
CMD_DATA_SRC_PIPE,
@@ -492,4 +508,6 @@ void tpo_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs)
p_funcs->get_config_mode = &tpo_cmd_get_config_mode;
p_funcs->update_fb = mdfld_dsi_dbi_update_fb;
p_funcs->get_panel_info = tpo_cmd_get_panel_info;
+ p_funcs->reset = mdfld_dsi_panel_reset;
+ p_funcs->drv_ic_init = mdfld_dsi_brightness_init;
}
diff --git a/drivers/staging/gma500/mrst_lvds.c b/drivers/staging/gma500/mrst_lvds.c
index 25fde4c..ac791c4 100644
--- a/drivers/staging/gma500/mrst_lvds.c
+++ b/drivers/staging/gma500/mrst_lvds.c
@@ -58,11 +58,11 @@ static void mrst_lvds_set_power(struct drm_device *dev,
pp_status = REG_READ(PP_STATUS);
} while ((pp_status & (PP_ON | PP_READY)) == PP_READY);
dev_priv->is_lvds_on = true;
- if (dev_priv->ops->lvds_bl_power)
- dev_priv->ops->lvds_bl_power(dev, true);
+ if (dev_priv->ops->lvds_bl_power)
+ dev_priv->ops->lvds_bl_power(dev, true);
} else {
- if (dev_priv->ops->lvds_bl_power)
- dev_priv->ops->lvds_bl_power(dev, false);
+ if (dev_priv->ops->lvds_bl_power)
+ dev_priv->ops->lvds_bl_power(dev, false);
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
~POWER_TARGET_ON);
do {
@@ -151,6 +151,7 @@ static void mrst_lvds_prepare(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+ struct psb_intel_mode_device *mode_dev = output->mode_dev;
if (!gma_power_begin(dev, true))
return;
@@ -162,23 +163,43 @@ static void mrst_lvds_prepare(struct drm_encoder *encoder)
gma_power_end(dev);
}
+static u32 mrst_lvds_get_max_backlight(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ u32 ret;
+
+ if (gma_power_begin(dev, false)) {
+ ret = ((REG_READ(BLC_PWM_CTL) &
+ BACKLIGHT_MODULATION_FREQ_MASK) >>
+ BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+ gma_power_end(dev);
+ } else
+ ret = ((dev_priv->saveBLC_PWM_CTL &
+ BACKLIGHT_MODULATION_FREQ_MASK) >>
+ BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+ return ret;
+}
+
static void mrst_lvds_commit(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+ struct psb_intel_mode_device *mode_dev = output->mode_dev;
if (mode_dev->backlight_duty_cycle == 0)
mode_dev->backlight_duty_cycle =
- psb_intel_lvds_get_max_backlight(dev);
+ mrst_lvds_get_max_backlight(dev);
mrst_lvds_set_power(dev, output, true);
}
static const struct drm_encoder_helper_funcs mrst_lvds_helper_funcs = {
.dpms = mrst_lvds_dpms,
.mode_fixup = psb_intel_lvds_mode_fixup,
- .prepare = mrst_intel_lvds_prepare,
+ .prepare = mrst_lvds_prepare,
.mode_set = mrst_lvds_mode_set,
- .commit = mrst_intel_lvds_commit,
+ .commit = mrst_lvds_commit,
};
static struct drm_display_mode lvds_configuration_modes[] = {
diff --git a/drivers/staging/gma500/psb_drv.h b/drivers/staging/gma500/psb_drv.h
index 194c64f..72f487a 100644
--- a/drivers/staging/gma500/psb_drv.h
+++ b/drivers/staging/gma500/psb_drv.h
@@ -31,6 +31,7 @@
#include "gtt.h"
#include "power.h"
#include "mrst.h"
+#include "medfield.h"
/* Append new drm mode definition here, align with libdrm definition */
#define DRM_MODE_SCALE_NO_SCALE 2
@@ -216,8 +217,8 @@ enum {
#define MDFLD_DSR_OVERLAY_0 (1 << 4)
#define MDFLD_DSR_OVERLAY_2 (1 << 5)
#define MDFLD_DSR_MIPI_CONTROL (1 << 6)
-#define MDFLD_DSR_DAMAGE_MASK_0 (1 << 0) | (1 << 2) | (1 << 4)
-#define MDFLD_DSR_DAMAGE_MASK_2 (1 << 1) | (1 << 3) | (1 << 5)
+#define MDFLD_DSR_DAMAGE_MASK_0 ((1 << 0) | (1 << 2) | (1 << 4))
+#define MDFLD_DSR_DAMAGE_MASK_2 ((1 << 1) | (1 << 3) | (1 << 5))
#define MDFLD_DSR_2D_3D (MDFLD_DSR_2D_3D_0 | MDFLD_DSR_2D_3D_2)
#define MDFLD_DSR_RR 45
@@ -605,7 +606,7 @@ struct drm_psb_private {
uint32_t dsr_idle_count;
bool is_in_idle;
bool dsr_enable;
- void (*exit_idle)(struct drm_device *dev, u32 update_src, void *p_surfaceAddr, bool check_hw_on_only);
+ void (*exit_idle)(struct drm_device *dev, u32 update_src);
/* 2D acceleration */
struct mutex mutex_2d;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists