| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1310945545.24642.18.camel@pc786-ubu.gnet.global.vpn>
Date: Mon, 18 Jul 2011 11:32:25 +1200
From: Austin Boyle <Austin.Boyle@...atnet.com>
To: Joakim Tjernlund <Joakim.Tjernlund@...nsmode.se>
CC: Alessandro Zummo <a.zummo@...ertech.it>,
<rtc-linux@...glegroups.com>, <linux-kernel@...r.kernel.org>,
Wolfram Sang <w.sang@...gutronix.de>,
David Brownell <dbrownell@...rs.sourceforge.net>,
Andrew Morton <akpm@...ux-foundation.org>
Subject: Re: [PATCH 2.6.39-rc7] RTC: rtc-ds1307 EEPROM support for ds1388
chip
Hi Joakim,
I see that you were responsible for adding support for the ds1388 RTC in
the ds1307 driver. Thank you for your work, I am using the driver for
this IC myself. I have been trying to submit a patch to add support for
the 512 bytes of EEPROM available on the ds1388 but have not received
any responses. Would you be willing to review my patch? I can send
through another version applied to the very latest kernel. Are the RTC
patches all submitted through Alessandro Zummo who is listed as the
maintainer or should they be sent directly to Linus?
Kind Regards,
Austin Boyle.
On Tue, 2011-06-14 at 16:15 +1200, Austin Boyle wrote:
> On Mon, 2011-05-23 at 17:18 +1200, Austin Boyle wrote:
> > This is my patch which extends the NVRAM access functions in the DS1307
> > driver to support the 512 bytes of EEPROM on the DS1388 chip. Could you
> > please review the patch? If there are any problems with the way I have
> > implemented this or suggested improvements I will gladly modify. Thanks!
>
> This is an updated version of the patch which prints the correct NVRAM
> size at init. Could someone please give me some feedback?
>
> [PATCH 3.0-rc3] RTC: rtc-ds1307: EEPROM support for ds1388 chip
>
> This patch adds support for different sized NVRAM, such as
> the 512 bytes of EEPROM on the DS1388 chip.
>
> Cc: Alessandro Zummo <a.zummo@...ertech.it>
> Signed-off-by: Austin Boyle <austin.boyle@...atnet.com>
> ---
> diff -upNr a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
> --- a/drivers/rtc/rtc-ds1307.c 2011-06-14 15:56:45.221497487 +1200
> +++ b/drivers/rtc/rtc-ds1307.c 2011-06-14 15:57:28.803510835 +1200
> @@ -95,15 +95,19 @@ enum ds_type {
> # define RX8025_BIT_VDET 0x40
> # define RX8025_BIT_XST 0x20
>
> +#define DS1307_MAX_NUM_ADDRS 3
>
> struct ds1307 {
> u8 offset; /* register's offset */
> + u16 nvram_size;
> + u16 nvram_offset;
> + u8 num_addrs;
> u8 regs[11];
> enum ds_type type;
> unsigned long flags;
> #define HAS_NVRAM 0 /* bit 0 == sysfs file active */
> #define HAS_ALARM 1 /* bit 1 == irq claimed */
> - struct i2c_client *client;
> + struct i2c_client *client[DS1307_MAX_NUM_ADDRS];
> struct rtc_device *rtc;
> struct work_struct work;
> s32 (*read_block_data)(const struct i2c_client *client, u8 command,
> @@ -113,23 +117,26 @@ struct ds1307 {
> };
>
> struct chip_desc {
> - unsigned nvram56:1;
> + unsigned nvram:1;
> unsigned alarm:1;
> };
>
> static const struct chip_desc chips[] = {
> [ds_1307] = {
> - .nvram56 = 1,
> + .nvram = 1,
> },
> [ds_1337] = {
> .alarm = 1,
> },
> [ds_1338] = {
> - .nvram56 = 1,
> + .nvram = 1,
> },
> [ds_1339] = {
> .alarm = 1,
> },
> +[ds_1388] = {
> + .nvram = 1,
> +},
> [ds_1340] = {
> },
> [ds_3231] = {
> @@ -248,7 +255,7 @@ static void ds1307_work(struct work_stru
> int stat, control;
>
> ds1307 = container_of(work, struct ds1307, work);
> - client = ds1307->client;
> + client = ds1307->client[0];
> lock = &ds1307->rtc->ops_lock;
>
> mutex_lock(lock);
> @@ -294,7 +301,7 @@ static int ds1307_get_time(struct device
> int tmp;
>
> /* read the RTC date and time registers all at once */
> - tmp = ds1307->read_block_data(ds1307->client,
> + tmp = ds1307->read_block_data(ds1307->client[0],
> ds1307->offset, 7, ds1307->regs);
> if (tmp != 7) {
> dev_err(dev, "%s error %d\n", "read", tmp);
> @@ -372,7 +379,7 @@ static int ds1307_set_time(struct device
> "write", buf[0], buf[1], buf[2], buf[3],
> buf[4], buf[5], buf[6]);
>
> - result = ds1307->write_block_data(ds1307->client,
> + result = ds1307->write_block_data(ds1307->client[0],
> ds1307->offset, 7, buf);
> if (result < 0) {
> dev_err(dev, "%s error %d\n", "write", result);
> @@ -530,8 +537,6 @@ static const struct rtc_class_ops ds13xx
>
> /*----------------------------------------------------------------------*/
>
> -#define NVRAM_SIZE 56
> -
> static ssize_t
> ds1307_nvram_read(struct file *filp, struct kobject *kobj,
> struct bin_attribute *attr,
> @@ -540,18 +545,39 @@ ds1307_nvram_read(struct file *filp, str
> struct i2c_client *client;
> struct ds1307 *ds1307;
> int result;
> + unsigned int addr = 0;
>
> client = kobj_to_i2c_client(kobj);
> ds1307 = i2c_get_clientdata(client);
>
> - if (unlikely(off >= NVRAM_SIZE))
> + if (unlikely(off >= ds1307->nvram_size))
> return 0;
> - if ((off + count) > NVRAM_SIZE)
> - count = NVRAM_SIZE - off;
> + if ((off + count) > ds1307->nvram_size)
> + count = ds1307->nvram_size - off;
> if (unlikely(!count))
> return count;
>
> - result = ds1307->read_block_data(client, 8 + off, count, buf);
> + if (ds1307->nvram_offset < 0xff) { /* ds1307, ds1338 */
> + result = ds1307->read_block_data(client, ds1307->nvram_offset + off,
> count, buf);
> + } else { /* ds1388 */
> + if ((off <= 0x00ff) && (off + count > 0x00ff)) { /* read spans two
> blocks */
> + client = ds1307->client[1]; /* first block */
> + addr = (unsigned int)off;
> + result = ds1307->read_block_data(client, addr, (0x100-addr), buf);
> + client = ds1307->client[2]; /* second block */
> + result += ds1307->read_block_data(client, 0x00, (count+addr-0x100),
> (buf+0x100-addr));
> +
> + } else { /* read spans one blocks */
> + if (off <= 0x00ff) {
> + client = ds1307->client[1];
> + addr = (unsigned int)off;
> + } else if (off <= 0x0200) {
> + client = ds1307->client[2];
> + addr = (unsigned int)off - 0x100;
> + }
> + result = ds1307->read_block_data(client, addr, count, buf);
> + }
> + }
> if (result < 0)
> dev_err(&client->dev, "%s error %d\n", "nvram read", result);
> return result;
> @@ -565,18 +591,40 @@ ds1307_nvram_write(struct file *filp, st
> struct i2c_client *client;
> struct ds1307 *ds1307;
> int result;
> + unsigned int addr = 0;
>
> client = kobj_to_i2c_client(kobj);
> ds1307 = i2c_get_clientdata(client);
>
> - if (unlikely(off >= NVRAM_SIZE))
> + if (unlikely(off >= ds1307->nvram_size))
> return -EFBIG;
> - if ((off + count) > NVRAM_SIZE)
> - count = NVRAM_SIZE - off;
> + if ((off + count) > ds1307->nvram_size)
> + count = ds1307->nvram_size - off;
> if (unlikely(!count))
> return count;
>
> - result = ds1307->write_block_data(client, 8 + off, count, buf);
> + if (ds1307->nvram_offset < 0xff) { /* ds1307, ds1338 */
> + result = ds1307->write_block_data(client, ds1307->nvram_offset + off,
> count, buf);
> + } else { /* ds1388 */
> + if ((off <= 0x00ff) && ((off + count) > 0x00ff)) { /* read spans two
> blocks */
> + client = ds1307->client[1]; /* first block */
> + addr = (unsigned int)off;
> + result = ds1307->write_block_data(client, addr, (0x100-addr), buf);
> + client = ds1307->client[2]; /* second block */
> + result = ds1307->write_block_data(client, 0x00, (addr+count-0x100),
> (buf+0x100-addr));
> +
> + } else { /* Device address/offset translation */
> + dev_dbg(&client->dev, "Write spans one block\n");
> + if (off <= 0x00ff) {
> + client = ds1307->client[1];
> + addr = (unsigned int)off;
> + } else if (off <= 0x0200) {
> + client = ds1307->client[2];
> + addr = (unsigned int)off - 0x100;
> + }
> + result = ds1307->write_block_data(client, addr, count, buf);
> + }
> + }
> if (result < 0) {
> dev_err(&client->dev, "%s error %d\n", "nvram write", result);
> return result;
> @@ -592,7 +640,6 @@ static struct bin_attribute nvram = {
>
> .read = ds1307_nvram_read,
> .write = ds1307_nvram_write,
> - .size = NVRAM_SIZE,
> };
>
> /*----------------------------------------------------------------------*/
> @@ -605,6 +652,7 @@ static int __devinit ds1307_probe(struct
> struct ds1307 *ds1307;
> int err = -ENODEV;
> int tmp;
> + int i;
> const struct chip_desc *chip = &chips[id->driver_data];
> struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
> int want_irq = false;
> @@ -624,9 +672,10 @@ static int __devinit ds1307_probe(struct
>
> i2c_set_clientdata(client, ds1307);
>
> - ds1307->client = client;
> + ds1307->client[0] = client;
> ds1307->type = id->driver_data;
> ds1307->offset = 0;
> + ds1307->num_addrs = 1;
>
> buf = ds1307->regs;
> if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
> @@ -642,12 +691,12 @@ static int __devinit ds1307_probe(struct
> case ds_1339:
> case ds_3231:
> /* has IRQ? */
> - if (ds1307->client->irq > 0 && chip->alarm) {
> + if (client->irq > 0 && chip->alarm) {
> INIT_WORK(&ds1307->work, ds1307_work);
> want_irq = true;
> }
> /* get registers that the "rtc" read below won't read... */
> - tmp = ds1307->read_block_data(ds1307->client,
> + tmp = ds1307->read_block_data(client,
> DS1337_REG_CONTROL, 2, buf);
> if (tmp != 2) {
> pr_debug("read error %d\n", tmp);
> @@ -681,7 +730,7 @@ static int __devinit ds1307_probe(struct
> break;
>
> case rx_8025:
> - tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
> + tmp = i2c_smbus_read_i2c_block_data(client,
> RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
> if (tmp != 2) {
> pr_debug("read error %d\n", tmp);
> @@ -747,6 +796,14 @@ static int __devinit ds1307_probe(struct
> break;
> case ds_1388:
> ds1307->offset = 1; /* Seconds starts at 1 */
> + ds1307->num_addrs = 3; /* uses 3 I2C addrs */
> + ds1307->nvram_size = 512; /* 512 bytes EEPROM */
> + ds1307->nvram_offset = 0xff;
> + break;
> + case ds_1307:
> + case ds_1338:
> + ds1307->nvram_size = 56; /* 56 bytes NVRAM */
> + ds1307->nvram_offset = 8;
> break;
> default:
> break;
> @@ -754,7 +811,7 @@ static int __devinit ds1307_probe(struct
>
> read_rtc:
> /* read RTC registers */
> - tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
> + tmp = ds1307->read_block_data(client, ds1307->offset, 8, buf);
> if (tmp != 8) {
> pr_debug("read error %d\n", tmp);
> err = -EIO;
> @@ -866,16 +923,35 @@ read_rtc:
> dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
> }
>
> - if (chip->nvram56) {
> + if (chip->nvram) {
> + nvram.size = ds1307->nvram_size;
> err = sysfs_create_bin_file(&client->dev.kobj, &nvram);
> if (err == 0) {
> set_bit(HAS_NVRAM, &ds1307->flags);
> - dev_info(&client->dev, "56 bytes nvram\n");
> + dev_info(&client->dev, "%d bytes nvram\n", nvram.size);
> + }
> + }
> +
> + /* use dummy devices for multiple address chips */
> + for (i = 1; i < ds1307->num_addrs; i++) {
> + ds1307->client[i] = i2c_new_dummy(client->adapter, client->addr + i);
> + if (!ds1307->client[i]) {
> + dev_err(&client->dev, "address 0x%02x unavailable\n",
> + client->addr + i);
> + err = -EADDRINUSE;
> + goto err_clients;
> }
> + i2c_set_clientdata(ds1307->client[i], ds1307);
> }
>
> return 0;
>
> +err_clients:
> + for (i = 1; i < ds1307->num_addrs; i++) {
> + if (ds1307->client[i]) {
> + i2c_unregister_device(ds1307->client[i]);
> + }
> + }
> exit_irq:
> rtc_device_unregister(ds1307->rtc);
> exit_free:
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists