| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201107181637.09878.arnd@arndb.de>
Date: Mon, 18 Jul 2011 16:37:09 +0000
From: Arnd Bergmann <arnd@...db.de>
To: linux-arm-kernel@...ts.infradead.org,
Grant Likely <grant.likely@...retlab.ca>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org,
Nicolas Pitre <nicolas.pitre@...aro.org>,
Russell King <rmk@....linux.org.uk>,
Thomas Gleixner <tglx@...utronix.de>,
Kukjin Kim <kgene.kim@...sung.com>,
Ben Dooks <ben-linux@...ff.org>,
David Brown <davidb@...eaurora.org>,
Daniel Walker <dwalker@...o99.com>,
Bryan Huntsman <bryanh@...eaurora.org>
Subject: Merge plans: what's im arm-soc.git for 3.1
Hi everyone,
This is an overview of the patches that have accumulated in the arm-soc
tree to date. Right now, the plan is to send it all in about 10 stages:
next/fixes -- bug fixes with no dependencies
next/cleanup -- cleanups and code consolidation
next/fixes2 -- bug fixes depending on cleanups
next/deletion -- removal of outdated board support (maybe fold into cleanup)
next/cross-platform -- consolidation towards a single zImage
next/devel -- new features for existing machines (depends on external gpio tree)
next/devicetree -- device tree conversions (depends on external devicetree tree)
next/soc -- support for new socs (prima2, zynq, omap4460)
next/board -- new board support for existing platforms
next/devel2 -- more new code for existing platforms (depends on omap_dss2 tree)
The devicetree work is not yet merged in arm-soc, I expect Grant to send it
to me soon. This will make it possible to replace board files with device tree
files in multiple subarchitectures
As usual, the contents are dominated by the omap2 platform in terms of lines
changed, which has been the case for a long time. The reason for this is mostly
a huge effort on cleanups there, but also a lot of work going into support for
the twl6040 companion chip (in drivers/mfd) and the omap4460 SOC.
Two new platforms are getting added, the Xilinx Zynq and the CSR
SirfPrima2. Both are entirely based on probing through the device tree
and are consequently much smaller than the existing platforms. As we
continue to consolidate header files across platforms, they will shrink
even further.
I haven't seen pull requests at all for Samsung and Qualcomm platforms,
and since they are not in arm/for-next I assume that these don't go through
Russell's tree either. It's not too late to send me pull requests yet, but
any new features submitted now will go into next/devel2 or a branch that
I submit later than that.
Arnd
---
The following changes since commit 8480ef63103d11a25da1cbc5f963430200e3b11c:
Merge branches 'depends/gpio' and 'depends/omap_dss2' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into tmp (2011-07-18 17:55:17 +0200)
are available in the git repository at:
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc.git for-next
Ambresh K (1):
OMAP4: DMTIMER: enable autoidle mode
Ameya Palande (1):
omap: rx51: Platform support for lp5523 led chip
Andre Silva (7):
ARM: mach-mx5/mx53_ard: Add support for i.MX53 ARD board
ARM:mach-mx5/board-mx53_loco: Add CD and WP GPIOs
ARM:mach-mx5/board-mx51_babbage: Add CD and WP GPIOs
ARM:mach-mx5/mx53_ard: Add ESDHC support
ARM:mach-mx5/mx53_ard: Add Watchdog timer support
ARM:mx53: Add I2C3 support
ARM:mach-mx5/mx53_ard: Add I2C2 and I2C3 support
Andy Green (6):
I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c
I2C: OMAP2+: increase omap_i2c_dev_attr flags from u8 to u32
I2C: OMAP2+: Introduce I2C IP versioning constants
I2C: OMAP1/OMAP2+: create omap I2C functionality flags for each cpu_... test
I2C: OMAP2+: Tag all OMAP2+ hwmod defintions with I2C IP revision
I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr
Aneesh V (2):
OMAP: ID: introduce chip detection for OMAP4460
OMAP4: ID: add omap_has_feature for max freq supported
Anton Vorontsov (1):
ARM: cns3xxx: Add support for L2 Cache Controller
Arnd Bergmann (23):
omap2+: fix build regression
ARM: Xilinx: merge board file into main platform code
Merge branch 'cleanup-part-2' of git+ssh://master.kernel.org/.../tmlind/linux-omap-2.6 into omap/cleanup
Merge branch 'fixes-part-2' of git://git.kernel.org/.../tmlind/linux-omap-2.6 into omap/fixes
Merge branch 'fixes-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 into imx/fixes
Merge branches 'at91/fixes', 'imx/fixes' and 'pxa/fixes' of git+ssh://master.kernel.org/.../arm/linux-arm-soc into next/fixes
Merge branches 'davinci/cleanup', 'imx/cleanup', 'omap/cleanup' and 'pxa/cleanup' of git+ssh://master.kernel.org/.../arm/linux-arm-soc into next/cleanup
Merge branches 'cns3xxx/devel', 'davinci/devel', 'imx/devel', 'lpc32xx/devel', 'pxa/devel', 'tegra/devel' and 'stericsson/master' of git+ssh://master.kernel.org/.../arm/linux-arm-soc into next/devel
Merge branch 'omap/board' of git+ssh://master.kernel.org/.../arm/linux-arm-soc into next/board
Merge branch 'zynq/master' of git+ssh://master.kernel.org/.../arm/linux-arm-soc into next/soc
Merge branch 'omap/4460' of git+ssh://master.kernel.org/.../arm/linux-arm-soc into next/soc
Merge branches 'omap/prcm' and 'omap/mfd' of git+ssh://master.kernel.org/.../arm/linux-arm-soc into next/devel-2
Merge branch 'next/deletion' of git+ssh://master.kernel.org/.../arm/linux-arm-soc into for-next
Merge branch 'next/cross-platform' into for-next
Avinash.H.M (1):
OMAP: hwmod: fix the i2c-reset timeout during bootup
Axel Castaneda Gonzalez (1):
ASoC: twl6040: Configure ramp step based on platform
Axel Lin (1):
ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.h
Barry Song (5):
ARM: CNS3XXX: add UL suffix to VMALLOC_END to ensure it is properly typed
ARM: LPC32XXX: add UL suffix to VMALLOC_END to ensure it is properly typed
ARM: NUC93X: add UL suffix to VMALLOC_END to ensure it is properly typed
ARM: CSR: mapping early DEBUG_LL uart
MAINTAINERS: add maintainer of CSR SiRFprimaII machine
Benoit Cousson (35):
OMAP2+: hwmod: Fix smart-standby + wakeup support
OMAP4: hwmod data: Add MSTANDBY_SMART_WKUP flag
OMAP2+: hwmod: Do not write the enawakeup bit if SYSC_HAS_ENAWAKEUP is not set
OMAP2+: hwmod: Remove _populate_mpu_rt_base warning
OMAP2+: hwmod: Fix the HW reset management
OMAP: hwmod: Add warnings if enable failed
OMAP: hwmod: Move pr_debug to improve the readability
OMAP4: hwmod data: Fix L3 interconnect data order and alignement
OMAP4: hwmod data: Remove un-needed parens
OMAP4: hwmod data: Fix bad alignement
OMAP4: hwmod data: Align interconnect format with regular modules
OMAP4: clock data: Add sddiv to USB DPLL
OMAP4: clock data: Remove usb_host_fs clkdev with NULL dev
OMAP4: clock data: Re-order some clock nodes and structure fields
OMAP4: clock data: Fix max mult and div for USB DPLL
OMAP4: prcm: Fix errors in few defines name
OMAP4: prm: Remove wrong clockdomain offsets
OMAP4: powerdomain data: Fix indentation
OMAP4: cm: Remove RESTORE macros to avoid access from SW
OMAP4: prcm_mpu: Fix indent in few macros
OMAP4: clockdomain data: Fix data order and wrong name
OMAP4: powerdomain data: Fix core mem states and missing cefuse flag
OMAP: omap_device: Create clkdev entry for hwmod main_clk
OMAP4: hwmod data: Add clock domain attribute
OMAP2+: hwmod: Init clkdm field at boot time
OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros
OMAP: hwmod: Wait the idle status to be disabled
OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros
OMAP4: prm: Replace warm reset API with the offset based version
OMAP4: prm: Remove deprecated functions
OMAP4: hwmod data: Add PRM context register offset
OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure
OMAP4: cm: Add two new APIs for modulemode control
OMAP4: hwmod: Introduce the module control in hwmod control
OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework
Binghua Duan (1):
ARM: CSR: Adding CSR SiRFprimaII board support
Charulatha V (1):
omap: ZOOM: QUART: Request reset GPIO
Christian Riesch (1):
davinci: da850: add a .set_rate method to ref_clk
Colin Cross (3):
ARM: tegra: remove mach/barriers.h
ARM: tegra: remove copy-and-pasted i2c platform data in boards
ARM: tegra: remove copy-and-pasted usb platform data from boards
Daiane Angolini (1):
ARM: mach-mx5/mx53_ard: Add gpio_keys support
Daniel Mack (1):
omap: Overo: remove duplicate call to overo_ads7846_init()
Dinh Nguyen (1):
ARM: mx51: Add support for low power suspend on MX51
Dmitry Eremin-Solenikov (1):
ARM: scoop: drop pcmcia_init callback
Dong Aisheng (1):
ARM: mxs-dma: include <linux/dmaengine.h>
Eric Miao (7):
ARM: pxa/saarb: make use of pxa3xx_map_io()
ARM: pxa: enable AUTO_ZRELADDR
ARM: pxa: add common header file for pxa3xx
ARM: pxa: avoid accessing interrupt registers directly
ARM: pxa: introduce {icip,ichp}_handle_irq() to prepare MULTI_IRQ_HANDLER
ARM: pxa: move declarations from generic.h to <soc>.h
ARM: pxa: enable MULTI_IRQ_HANDLER for all boards
Fabio Estevam (28):
mx51: Let USB Storage be built by default
ARM: mx53: Fix alternate modes for MX53_PAD_PATA_DATA6
ARM: mx53: Fix the chip select addresses
ARM: mach-imx/mx27_3ds: Use the standard i.MX macro for GPIO numbering
ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signals
mxc: iomuxv1: Do not use gpio_request when setting the pin as GPIO
ARM: mach-imx/mx27_3ds: Fix regulator support
ARM: mxc: iomux-v1: Fix build warning
ARM: mx51: Fix the address space length for SSI
ARM: mx53: Fix some interrupts marked as reserved.
ARM: mx5/mx51_babbage: Move GPIO initialization for USB PHY Reset line to common place
ARM: mx5/mx51_babbage: Use gpio_request_array for USBH1 pins
ARM: imx/mach-apf9328: Simplify UART0 registration
ARM: mach-imx/scb9328: Make the UART gpio setup simpler
ARM: mach-imx/mx27_3ds: Use the standard gpio_to_irq function
ARM: mach-imx/mx27_3ds: Do not annotate the chip select as internal
ARM: mx5/mx53_loco: Add support for LED
ARM: mx5/mx53_evk: Add support for LED
ARM: mx53: Add SDMA clock
ARM: mx53: Add SDMA support for MX53
ARM: imx2: Fix GPIO iosize
ARM: mach-imx/mx27_3ds: Add LCD support
ARM: mach-imx/mx27_3ds: Add touchscreen support
ARM: mx53: Add support for missing UARTs
ARM: mx53: Add SSI suport
ARM: mx53: Add keypad support
ARM: mach-mx5/mx53_ard: Add missing definition
ARM: mx25: Fix typo on CAN1_RX pad setting
Grazvydas Ignotas (1):
omap: cleanup NAND platform data
H Hartley Sweeten (1):
plat-mxc/pwm.c: use resource_size()
Haojian Zhuang (2):
ARM: pxa: add clk_set_rate()
ARM: mmp/dkb: enable max7312 gpio expander
Igor Grinberg (7):
arm: omap3: cm-t35: minor comments fixes
arm: omap3: cm-t35: fix slow path warning
arm: omap3: cm-t35: add support for cm-t3730
ARM: pxa/cm-x300: fix V3020 RTC functionality
ARM: pxa/cm-x300: GPIO cleanup
ARM: pxa/cm-x300: minor style cleanup
ARM: pxa/cm-x300: update cm_x300_defconfig
Imre Kaloz (1):
ARM: cns3xxx: Should select CPU_V6K
Jarkko Nikula (4):
omap: mcbsp: Drop SPI mode support
omap: mcbsp: Drop in-driver transfer support
omap: mcbsp: Remove rx_/tx_word_length variables
omap: mcbsp: Remove port number enums
Jean Pihet (1):
OMAP PM: remove OMAP_PM_NONE config option
Joel A Fernandes (1):
OMAP3: beagle: add support for beagleboard xM revision C
John Linn (1):
ARM: Xilinx: Adding Xilinx board support
Jon Hunter (3):
OMAP4: clock data: Remove McASP2, McASP3 and MMC6 clocks
OMAP4: clock data: Remove UNIPRO clock nodes
OMAP: Add debugfs node to show the summary of all clocks
Jonathan Cameron (1):
pcmcia: pxa2xx/trizeps4: remove unnecessary ifdefs
Julia Lawall (1):
arch/arm/mach-omap2/clock.c: add missing clk_put
Jürgen Lambrecht (1):
Enable RTC driver.
KOSAKI Motohiro (1):
arm,tegra: replace cpu_set() with modern api
Kalle Jokiniemi (1):
OMAP3: rx-51: Add full regulator definitions
Kevin Hilman (4):
OMAP3: PM debug: remove sleep_while_idle feature
OMAP2: PM debug: remove register dumping
OMAP3: PM debug: remove register dumping
OMAP: omap_device: replace _find_by_pdev() with to_omap_device()
Lei Wen (2):
ARM: pxa910: correct nand pmu setting
ARM: pxa168: correct nand pmu setting
Liam Girdwood (3):
ASoC: twl6040: add all ABE DAIs
ASoC: twl6040: Support other sample rates in constraints.
ASoC: twl6040: set default constraints.
Linus Walleij (10):
mach-ux500: add HREFv60 Kconfig option
mach-ux500: fix HREFv60 regression
mach-ux500: correct MMC/SDI parameters
mach-ux500: activate USB in the U8500 defconfig
mach-ux500: complete regulator constraints for MOP500 board
mach-u300: cleanup clockevent code
mach-u300: set apropriate FIFO trigger levels
mach-ux500: register a clock for the SMP TWD
mach-ux500: fix USB build error
mach-integrator: delete bits.h include file
Lothar Waßmann (2):
mach-mx5: fix the I2C clock parents
iomux-mx53: add missing 'IOMUX_CONFIG_SION' for some I2C pad definitions
Marc Dietrich (5):
ARM: tegra: paz00: whitespace cleanup
ARM: tegra: paz00: register i2c busses
ARM: tegra: paz00: enable usb ports
ARM: tegra: paz00: cleanup sdhci ports
ARM: tegra: paz00: change the machine name
Marc Kleine-Budde (1):
ARM: mx53: Fix the base addresses for the DDR memory regions
Mathieu J. Poirier (3):
mach-ux500: setting proper uart for snowball
mach-ux500: Add SDI support for snowball board
mach-ux500: Kconfig for snowball board
Mattias Wallin (1):
mach-ux500: iomap PRCMU TCDM memory
Miguel Vadillo (1):
OMAP2+: hwmod: Enable module in shutdown to access sysconfig
Mike Rapoport (3):
ARM: tegra: trimslice: register i2c busses and devices
ARM: tegra: trimslice: add audio devices and clocks
ARM: tegra: trimslice: enable USB ports
Misael Lopez Cruz (5):
mfd: twl6040: Add initial support
ASoC: twl6040: Convert into TWL6040 MFD child
input: Add initial support for TWL6040 vibrator
ASoC: twl6040: Remove pll and headset mode dependency
OMAP4: SDP4430: Add twl6040 codec platform support
Nicolas Pitre (3):
ARM: mach-s3c24a0: delete
ARM: mach-s3c2400: delete
ARM: mach-loki: delete
Nishanth Menon (4):
OMAP3+: SR: make notify independent of class
OMAP3+: SR: disable interrupt by default
OMAP3+: SR: enable/disable SR only on need
OMAP3+: SR: fix cosmetic indentation
Ohad Ben-Cohen (2):
omap: iovmm: s/sg_dma_len(sg)/sg->length/
OMAP4: iommu: fix clock name
Oleg Drokin (2):
cleanup regulator supply definitions in mach-omap2
Remove old-style supply.dev assignments common in hsmmc init
Paul Parsons (1):
ARM: pxa: fix PGSR register address calculation
Paul Walmsley (14):
OMAP: dmtimer: add missing include
omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space arrays
omap_hwmod: share identical omap_hwmod_addr_space arrays
omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arrays
omap_hwmod: share identical omap_hwmod_mpu_irqs arrays
omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays
omap_hwmod: share identical omap_hwmod_dma_info arrays
omap_hwmod: share identical omap_hwmod_class, omap_hwmod_class_sysconfig arrays
Merge branches 'dmtimer_precleanup_3.1', 'hwmod_core_cleanup_a_3.1', 'combine_common_hwmod_3.1', 'omap4_hwmod_data_cleanup_a_3.1', 'clock_cleanup_a_3.1', 'prcm_cleanup_a_3.1', 'omap_pm_cleanup_3.1' and 'omap_device_cleanup_3.1' into prcm-cleanup-3.1
Merge branches 'powerdomain_fixes_3.1', 'hardware_workarounds_3.1', 'hwmod_dss_fix_3.1' and 'i2c_fixes_3.1' into prcm-fixes-3.1
OMAP2+: clockdomain: add clkdm_in_hwsup()
OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code
Merge branches 'omap4_clockdomain_hwmod_3.1', 'clock_debugfs_a_3.1', 'omap4_clock_auxclk_3.1' and 'omap_device_a_3.1' into prcm-devel-3.1
ASoC: omap: McBSP: fix build breakage on OMAP1
Peter Ujfalusi (22):
omap: board-omap3evm: Fix compilation error
OMAP: New twl-common for common TWL configuration
OMAP4: Move common twl6030 configuration to twl-common
OMAP3: Move common twl configuration to twl-common
OMAP3: Move common regulator configuration to twl-common
MFD: twl4030-codec: Rename internals from codec to audio
MFD: twl4030-codec -> twl4030-audio: Rename the driver
MFD: twl4030-audio: Rename platform data
MFD: twl6040: Change platform data for soc codec driver
OMAP4: SDP4430: Add twl6040 vibrator platform support
MFD: twl6040: Use resource to provide irq number for slaves
input: twl6040-vibra: Do not use wrapper for irq request
ASoC: twl6040: Do not use wrapper for irq request
MFD: twl6040: Demand valid interrupt configuration
MFD: twl6040: Remove wrapper for threaded irq request
ASoC: twl6040: Use neutral name for power mode text/enum
ASoC: twl6040: Move PLL selection to codec driver
ASoC: twl6040: Simplify sample rate constraint handling
ASoC: twl6040: Configure PLL only once
MFD: twl6040: Remove enum for PLL tracking
ASoC: twl6040: No need to convert the PLL ID
ASoC: twl6040: Add back support for legacy mode
Philipp Zabel (4):
ARM: pxa/magician: fix MAGICIAN_EGPIO_BASE, align with NR_BUILTIN_GPIO
ARM: pxa/magician: use gpio arrays for backlight and global gpios
ARM: pxa/hx4700: use gpio arrays for global gpios
ARM: pxa/mioa701: use gpio arrays for global and gsm gpios
Rajendra Nayak (7):
OMAP4: PRCM: OMAP4460 specific PRM and CM register bitshifts
OMAP4: clocks: Update the clock tree with 4460 clock nodes
OMAP2+: PM: Initialise sleep_switch to a non-valid value
OMAP4: clock data: Add missing divider selection for auxclks
OMAP2+: PM: idle clkdms only if already in idle
OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming
OMAP2+: hwmod: Follow the recommended PRCM module enable sequence
Rob Herring (6):
powerpc: rename ppc_pci_*_flags to pci_*_flags
pci: move microblaze and powerpc pci flag functions into asm-generic
ARM: remove unnecessary mach/hardware.h includes
ARM: pci: make pcibios_assign_all_busses use pci_has_flag
ARM: convert PCI defines to variables
ARM: set vga memory base at run-time
Robert Marklund (4):
mach-x500: fix SECTION warnings in uib
mach-ux500: add basic support for snowball board
mach-ux500: Add pin configuration for snowball board
mach-ux500: add configs for snowball board
Robert Morell (1):
arm: tegra: remove generic disp clock divisor flag
Rongjun Ying (1):
ARM: CSR: initializing L2 cache
Russell King - ARM Linux (2):
Convert OMAPs 32kHz clocksource implementation to use the generic MMIO clocksource support. This achieves several things:
ARM: introduce handle_IRQ() not to dump exception stack
Sanjeev Premi (1):
OMAP2+: PM: fix section mismatch in pm_dbg_init()
Santosh Shilimkar (2):
OMAP4: clock data: Keep GPMC clocks always enabled and hardware managed
OMAP4: powerdomain data: Remove unsupported MPU powerdomain state
Sascha Hauer (11):
ARM i.MX dma: Fix burstsize settings
ARM i.MX: fix last user of iomux.h and remove it
ARM i.MX: define CLOCK_TICK_RATE to bogus value
ARM i.MX: remove SoC defines around header includes
ARM i.MX: dmav1: kill SoC ifdefs
ARM i.MX mxc.h: use CONFIG_SOC_* instead of CONFIG_ARCH_*
ARM i.MX tzic: do not depend on MXC_INTERNAL_IRQS
ARM i.MX avic: do not depend on MXC_INTERNAL_IRQS
ARM i.MX: get rid of wrong MXC_INTERNAL_IRQ usage
ARM i.MX debug macro: use CONFIG_SOC_* instead of CONFIG_ARCH_*
Merge remote-tracking branch 'grant/gpio/next-mx' into devel-features
Sekhar Nori (6):
davinci: psc.h: clean up indentation done using spaces
davinci: dm6467/T EVM: fix setting up of reference clock rate
davinci: pass clock flags to davinci_psc_config()
davinci: enable forced transitions on PSC
davinci: da850: add support for SATA interface
davinci: da850 evm: register SATA device
Shawn Guo (10):
ARM: mxs_defconfig: Change CONFIG_RTC_CLASS 'm' to 'y'
ARM: mxc: imx-sdma device gets 16K iosize than 4K
ARM: mxc: sdma on imx25 is a V2 block
ARM: mxc: change imx-dma default to_version to 1
ARM: mxc: imx-dma on imx25 has no other TO version but TO1
ARM: mxs_defconfig: Add mx23evk and mx28evk build
ARM: mxs/mx28evk: add leds-gpio device for heartbeat
ARM: mxc: convert tzic to use generic irq chip
ARM: mxc: clean up imx-dma device registration
dmaengine: imx-sdma: pass sdma firmware name via platform data
Shubhrajyoti Datta (1):
OMAP4: Keyboard: Mux changes in the board file
Silesh C V (2):
omap: HSMMC: Fix GPIO muxing
omap: 4430SDP: Register the card detect GPIO properly
Stephen Warren (1):
ARM: Tegra: Seaboard: Re-order sdhci device registration
Suman Anna (1):
omap: iommu: fix pte programming
Tanmay Upadhyay (3):
ARM: pxa168: Add support for UART3
ARM: pxa168: Add support for Ethernet
ARM: pxa168: Add board support for gplugD
Tomi Valkeinen (2):
OMAP4: hwmod data: Modify DSS opt clocks
OMAP4: hwmod data: Change DSS main_clk scheme
Tony Lindgren (18):
omap: Use separate init_irq functions to avoid cpu_is_omap tests early
omap: Set separate timer init functions to avoid cpu_is_omap tests
omap: Move dmtimer defines to dmtimer.h
omap: Make a subset of dmtimer functions into inline functions
omap2+: Use dmtimer macros for clockevent
omap2+: Remove gptimer_wakeup for now
omap2+: Reserve clocksource and timesource and initialize dmtimer later
omap2+: Use dmtimer macros for clocksource
omap2+: Remove omap2_gp_clockevent_set_gptimer
omap2+: Rename timer-gp.c into timer.c to combine timer init functions
Merge branch 'devel-timer' into devel-cleanup
Merge branch 'for_3.1/pm-misc' of git://git.kernel.org/.../khilman/linux-omap-pm into devel-cleanup
Merge branch 'iommu-for-tony' of git://github.com/ohadbc/omap-iommu into devel-fixes
Merge branch 'peter/topic/for-tony_mach-cleanup' of git://gitorious.org/omap-audio/linux-audio into cleanup-part-2
Merge branch 'peter/topic/for-tony' of git://gitorious.org/omap-audio/linux-audio into twl-asoc
Merge branch 'cleanup-part-2' into devel-board
Merge branch 'prcm-cleanup-3.1' of git://git.pwsan.com/linux-2.6 into cleanup-part-3
Merge branch 'prcm-fixes-3.1' of git://git.pwsan.com/linux-2.6 into fixes-part-2
Troy Kisky (5):
MXC: iomux-v3: correct NO_PAD_CTRL definition
ARM: i.MX53: Fix IOMUX type o's
ARM: i.MX53: UARTn_TXD pin should not change RXD input select
ARM: i.MX53: UARTn_CTS pin should not change RTS input select
ARM: i.MX53: consistently use MX53_UART_PAD_CTRL for uart txd/rxd/rts/cts
Uwe Kleine-König (4):
ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0
ARM: imx: convert to new leds-gpio registration helper
ARM: mx5: convert to new leds-gpio registration helper
ARM: mxs/tx28: convert to new leds-gpio registration helper
Vaibhav Bedia (1):
OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition()
Vasily Khoruzhick (1):
ARM: pxa/z2: add poweroff function
Vishal Mahaveer (1):
omap: blaze: add mmc5/wl1283 device support
Wolfram Sang (3):
arm: mxs: add mmc-device for mach-tx28
arm: lpc32xx: add tsc-device
arm: lpc32xx: add rtc-device
Documentation/arm/Samsung-S3C24XX/Overview.txt | 7 +-
Documentation/devicetree/bindings/arm/sirf.txt | 3 +
Documentation/devicetree/bindings/arm/xilinx.txt | 7 +
MAINTAINERS | 6 +
arch/arm/Kconfig | 44 +-
arch/arm/Makefile | 7 +-
arch/arm/boot/dts/prima2-cb.dts | 416 +++++++++
arch/arm/boot/dts/zynq-ep107.dts | 52 ++
arch/arm/configs/cm_x300_defconfig | 18 +-
arch/arm/configs/loki_defconfig | 120 ---
arch/arm/configs/mx51_defconfig | 3 +-
arch/arm/configs/mxs_defconfig | 4 +-
arch/arm/configs/u8500_defconfig | 32 +-
arch/arm/include/asm/hardware/scoop.h | 1 -
arch/arm/include/asm/irq.h | 1 +
arch/arm/include/asm/pci.h | 12 +-
arch/arm/include/asm/vga.h | 5 +-
arch/arm/kernel/irq.c | 19 +-
arch/arm/lib/ecard.S | 1 -
arch/arm/lib/io-readsw-armv3.S | 1 -
arch/arm/lib/io-writesw-armv3.S | 1 -
arch/arm/mach-bcmring/include/mach/hardware.h | 2 -
arch/arm/mach-cns3xxx/cns3420vb.c | 3 +-
arch/arm/mach-cns3xxx/core.c | 43 +
arch/arm/mach-cns3xxx/core.h | 6 +
arch/arm/mach-cns3xxx/include/mach/hardware.h | 22 -
arch/arm/mach-cns3xxx/include/mach/vmalloc.h | 2 +-
arch/arm/mach-cns3xxx/pcie.c | 3 +
arch/arm/mach-davinci/board-da850-evm.c | 7 +
arch/arm/mach-davinci/board-dm646x-evm.c | 17 +-
arch/arm/mach-davinci/clock.c | 46 +-
arch/arm/mach-davinci/clock.h | 3 +
arch/arm/mach-davinci/da850.c | 10 +
arch/arm/mach-davinci/devices-da8xx.c | 126 +++
arch/arm/mach-davinci/dm646x.c | 4 +-
arch/arm/mach-davinci/include/mach/da8xx.h | 2 +
arch/arm/mach-davinci/include/mach/dm646x.h | 2 -
arch/arm/mach-davinci/include/mach/psc.h | 151 ++--
arch/arm/mach-davinci/psc.c | 14 +-
arch/arm/mach-dove/include/mach/hardware.h | 7 -
arch/arm/mach-dove/pcie.c | 3 +
arch/arm/mach-ep93xx/include/mach/hardware.h | 2 -
arch/arm/mach-footbridge/dc21285.c | 3 +
arch/arm/mach-footbridge/include/mach/hardware.h | 5 -
arch/arm/mach-imx/Kconfig | 6 +
arch/arm/mach-imx/dma-v1.c | 25 +-
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 23 +-
arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 15 +-
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c | 13 +-
arch/arm/mach-imx/mach-apf9328.c | 7 +-
arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 2 +-
arch/arm/mach-imx/mach-mx27_3ds.c | 137 +++-
arch/arm/mach-imx/mach-mx31_3ds.c | 10 +-
arch/arm/mach-imx/mach-mx31moboard.c | 14 +-
arch/arm/mach-imx/mach-mx35_3ds.c | 2 +-
arch/arm/mach-imx/mach-scb9328.c | 17 +-
arch/arm/mach-imx/mm-imx21.c | 3 +
arch/arm/mach-imx/mm-imx25.c | 25 +
arch/arm/mach-imx/mm-imx27.c | 3 +
arch/arm/mach-imx/mm-imx31.c | 27 +
arch/arm/mach-imx/mm-imx35.c | 47 +
arch/arm/mach-imx/mx31lite-db.c | 15 +-
arch/arm/mach-integrator/include/mach/bits.h | 61 --
arch/arm/mach-integrator/include/mach/hardware.h | 7 -
arch/arm/mach-integrator/pci_v3.c | 5 +
arch/arm/mach-iop13xx/include/mach/hardware.h | 7 -
arch/arm/mach-iop13xx/pci.c | 5 +-
arch/arm/mach-iop32x/include/mach/hardware.h | 3 -
arch/arm/mach-iop33x/include/mach/hardware.h | 3 -
arch/arm/mach-ixp2000/include/mach/hardware.h | 8 -
arch/arm/mach-ixp2000/pci.c | 5 +
arch/arm/mach-ixp23xx/include/mach/hardware.h | 4 -
arch/arm/mach-ixp23xx/pci.c | 5 +
arch/arm/mach-ixp4xx/common-pci.c | 5 +
arch/arm/mach-ixp4xx/include/mach/hardware.h | 5 -
arch/arm/mach-kirkwood/include/mach/hardware.h | 7 -
arch/arm/mach-kirkwood/pcie.c | 3 +
arch/arm/mach-ks8695/include/mach/hardware.h | 9 -
arch/arm/mach-ks8695/pci.c | 3 +
arch/arm/mach-loki/Kconfig | 13 -
arch/arm/mach-loki/Makefile | 3 -
arch/arm/mach-loki/addr-map.c | 122 ---
arch/arm/mach-loki/common.c | 162 ----
arch/arm/mach-loki/common.h | 37 -
arch/arm/mach-loki/include/mach/bridge-regs.h | 28 -
arch/arm/mach-loki/include/mach/debug-macro.S | 19 -
arch/arm/mach-loki/include/mach/entry-macro.S | 30 -
arch/arm/mach-loki/include/mach/hardware.h | 15 -
arch/arm/mach-loki/include/mach/io.h | 26 -
arch/arm/mach-loki/include/mach/irqs.h | 58 --
arch/arm/mach-loki/include/mach/loki.h | 83 --
arch/arm/mach-loki/include/mach/memory.h | 10 -
arch/arm/mach-loki/include/mach/system.h | 36 -
arch/arm/mach-loki/include/mach/timex.h | 11 -
arch/arm/mach-loki/include/mach/uncompress.h | 47 -
arch/arm/mach-loki/include/mach/vmalloc.h | 5 -
arch/arm/mach-loki/irq.c | 22 -
arch/arm/mach-loki/lb88rc8480-setup.c | 99 --
arch/arm/mach-lpc32xx/clock.c | 2 +-
arch/arm/mach-lpc32xx/common.c | 42 +
arch/arm/mach-lpc32xx/common.h | 2 +
arch/arm/mach-lpc32xx/include/mach/vmalloc.h | 2 +-
arch/arm/mach-mmp/Kconfig | 7 +
arch/arm/mach-mmp/Makefile | 1 +
arch/arm/mach-mmp/clock.c | 15 +
arch/arm/mach-mmp/clock.h | 1 +
arch/arm/mach-mmp/gplugd.c | 189 ++++
arch/arm/mach-mmp/include/mach/mfp-gplugd.h | 52 ++
arch/arm/mach-mmp/include/mach/mfp-pxa168.h | 19 +
arch/arm/mach-mmp/include/mach/pxa168.h | 8 +
arch/arm/mach-mmp/include/mach/regs-apmu.h | 1 +
arch/arm/mach-mmp/pxa168.c | 8 +-
arch/arm/mach-mmp/pxa910.c | 2 +-
arch/arm/mach-mmp/ttc_dkb.c | 31 +-
arch/arm/mach-mv78xx0/include/mach/hardware.h | 7 -
arch/arm/mach-mv78xx0/pcie.c | 3 +
arch/arm/mach-mx5/Kconfig | 18 +
arch/arm/mach-mx5/Makefile | 2 +
arch/arm/mach-mx5/board-cpuimx51.c | 12 +-
arch/arm/mach-mx5/board-mx51_3ds.c | 3 +-
arch/arm/mach-mx5/board-mx51_babbage.c | 56 +-
arch/arm/mach-mx5/board-mx51_efikamx.c | 15 +-
arch/arm/mach-mx5/board-mx51_efikasb.c | 16 +-
arch/arm/mach-mx5/board-mx53_ard.c | 254 ++++++
arch/arm/mach-mx5/board-mx53_evk.c | 17 +
arch/arm/mach-mx5/board-mx53_loco.c | 35 +-
arch/arm/mach-mx5/clock-mx51-mx53.c | 22 +-
arch/arm/mach-mx5/crm_regs.h | 2 +
arch/arm/mach-mx5/devices-imx53.h | 8 +
arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 24 +-
arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c | 19 +-
arch/arm/mach-mx5/mm.c | 44 +
arch/arm/mach-mx5/pm-imx5.c | 73 ++
arch/arm/mach-mxs/Kconfig | 3 +
arch/arm/mach-mxs/devices/platform-mxsfb.c | 1 +
arch/arm/mach-mxs/include/mach/dma.h | 2 +
arch/arm/mach-mxs/mach-mx28evk.c | 21 +
arch/arm/mach-mxs/mach-tx28.c | 19 +-
arch/arm/mach-nuc93x/include/mach/vmalloc.h | 2 +-
arch/arm/mach-omap1/board-ams-delta.c | 4 +-
arch/arm/mach-omap1/board-fsample.c | 4 +-
arch/arm/mach-omap1/board-generic.c | 4 +-
arch/arm/mach-omap1/board-h2.c | 4 +-
arch/arm/mach-omap1/board-h3.c | 4 +-
arch/arm/mach-omap1/board-htcherald.c | 4 +-
arch/arm/mach-omap1/board-innovator.c | 4 +-
arch/arm/mach-omap1/board-nokia770.c | 4 +-
arch/arm/mach-omap1/board-osk.c | 4 +-
arch/arm/mach-omap1/board-palmte.c | 4 +-
arch/arm/mach-omap1/board-palmtt.c | 4 +-
arch/arm/mach-omap1/board-palmz71.c | 4 +-
arch/arm/mach-omap1/board-perseus2.c | 4 +-
arch/arm/mach-omap1/board-sx1.c | 4 +-
arch/arm/mach-omap1/board-voiceblue.c | 4 +-
arch/arm/mach-omap1/irq.c | 2 +-
arch/arm/mach-omap1/mcbsp.c | 4 +-
arch/arm/mach-omap1/time.c | 6 +-
arch/arm/mach-omap1/timer32k.c | 4 -
arch/arm/mach-omap2/Kconfig | 6 +-
arch/arm/mach-omap2/Makefile | 20 +-
arch/arm/mach-omap2/board-2430sdp.c | 4 +-
arch/arm/mach-omap2/board-3430sdp.c | 93 +--
arch/arm/mach-omap2/board-3630sdp.c | 4 +-
arch/arm/mach-omap2/board-4430sdp.c | 341 +++++---
arch/arm/mach-omap2/board-am3517crane.c | 4 +-
arch/arm/mach-omap2/board-am3517evm.c | 4 +-
arch/arm/mach-omap2/board-apollon.c | 4 +-
arch/arm/mach-omap2/board-cm-t35.c | 176 ++--
arch/arm/mach-omap2/board-cm-t3517.c | 5 +-
arch/arm/mach-omap2/board-devkit8000.c | 64 +-
arch/arm/mach-omap2/board-flash.c | 4 -
arch/arm/mach-omap2/board-generic.c | 4 +-
arch/arm/mach-omap2/board-h4.c | 4 +-
arch/arm/mach-omap2/board-igep0020.c | 79 +--
arch/arm/mach-omap2/board-ldp.c | 29 +-
arch/arm/mach-omap2/board-n8x0.c | 12 +-
arch/arm/mach-omap2/board-omap3beagle.c | 167 ++---
arch/arm/mach-omap2/board-omap3evm.c | 111 +--
arch/arm/mach-omap2/board-omap3logic.c | 19 +-
arch/arm/mach-omap2/board-omap3pandora.c | 119 +--
arch/arm/mach-omap2/board-omap3stalker.c | 99 +--
arch/arm/mach-omap2/board-omap3touchbook.c | 97 +--
arch/arm/mach-omap2/board-omap4panda.c | 161 +---
arch/arm/mach-omap2/board-overo.c | 84 +--
arch/arm/mach-omap2/board-rm680.c | 12 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 194 ++++-
arch/arm/mach-omap2/board-rx51.c | 4 +-
arch/arm/mach-omap2/board-ti8168evm.c | 9 +-
arch/arm/mach-omap2/board-zoom-debugboard.c | 9 +
arch/arm/mach-omap2/board-zoom-peripherals.c | 128 +---
arch/arm/mach-omap2/board-zoom.c | 8 +-
arch/arm/mach-omap2/clock.c | 28 +-
arch/arm/mach-omap2/clock.h | 3 +
arch/arm/mach-omap2/clock2420_data.c | 22 +-
arch/arm/mach-omap2/clock2430_data.c | 32 +-
arch/arm/mach-omap2/clock3xxx_data.c | 44 +-
arch/arm/mach-omap2/clock44xx.h | 7 -
arch/arm/mach-omap2/clock44xx_data.c | 482 ++++++-----
arch/arm/mach-omap2/clockdomain.c | 210 ++++-
arch/arm/mach-omap2/clockdomain.h | 11 +
arch/arm/mach-omap2/clockdomain2xxx_3xxx.c | 6 +-
arch/arm/mach-omap2/clockdomain44xx.c | 13 +-
arch/arm/mach-omap2/clockdomains44xx_data.c | 124 ++--
arch/arm/mach-omap2/cm-regbits-44xx.h | 659 ++++++--------
arch/arm/mach-omap2/cm1_44xx.h | 64 +-
arch/arm/mach-omap2/cm2_44xx.h | 73 +--
arch/arm/mach-omap2/cm44xx.h | 8 +-
arch/arm/mach-omap2/cminst44xx.c | 150 +++-
arch/arm/mach-omap2/cminst44xx.h | 10 +-
arch/arm/mach-omap2/common-board-devices.c | 27 +-
arch/arm/mach-omap2/common-board-devices.h | 26 +-
arch/arm/mach-omap2/devices.c | 3 +-
arch/arm/mach-omap2/gpmc-nand.c | 10 +-
arch/arm/mach-omap2/hsmmc.c | 7 +-
arch/arm/mach-omap2/i2c.c | 68 ++
arch/arm/mach-omap2/id.c | 53 +-
arch/arm/mach-omap2/io.c | 17 +-
arch/arm/mach-omap2/iommu2.c | 4 +-
arch/arm/mach-omap2/irq.c | 32 +-
arch/arm/mach-omap2/omap-iommu.c | 2 +-
arch/arm/mach-omap2/omap4-common.c | 10 +-
arch/arm/mach-omap2/omap_hwmod.c | 404 ++++++++--
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 841 +++---------------
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 917 +++----------------
.../omap_hwmod_2xxx_3xxx_interconnect_data.c | 173 ++++
.../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 322 +++++++
.../mach-omap2/omap_hwmod_2xxx_interconnect_data.c | 130 +++
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 150 ++++
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 672 +++-----------
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 940 +++++++++++++-------
arch/arm/mach-omap2/omap_hwmod_common_data.c | 20 -
arch/arm/mach-omap2/omap_hwmod_common_data.h | 93 ++-
arch/arm/mach-omap2/pm-debug.c | 372 +--------
arch/arm/mach-omap2/pm.c | 6 +-
arch/arm/mach-omap2/pm.h | 16 -
arch/arm/mach-omap2/pm24xx.c | 6 +-
arch/arm/mach-omap2/pm34xx.c | 6 -
arch/arm/mach-omap2/powerdomains44xx_data.c | 27 +-
arch/arm/mach-omap2/prcm.c | 2 +-
arch/arm/mach-omap2/prcm_mpu44xx.h | 69 +-
arch/arm/mach-omap2/prm-regbits-44xx.h | 8 +
arch/arm/mach-omap2/prm44xx.c | 145 +---
arch/arm/mach-omap2/prm44xx.h | 44 +-
arch/arm/mach-omap2/prminst44xx.c | 112 +++-
arch/arm/mach-omap2/prminst44xx.h | 12 +-
arch/arm/mach-omap2/smartreflex.c | 38 +-
arch/arm/mach-omap2/timer-gp.c | 266 ------
arch/arm/mach-omap2/timer-gp.h | 16 -
arch/arm/mach-omap2/timer.c | 342 +++++++
arch/arm/mach-omap2/twl-common.c | 304 +++++++
arch/arm/mach-omap2/twl-common.h | 59 ++
arch/arm/mach-orion5x/include/mach/hardware.h | 7 -
arch/arm/mach-orion5x/pci.c | 2 +
arch/arm/mach-prima2/Makefile | 7 +
arch/arm/mach-prima2/Makefile.boot | 3 +
arch/arm/mach-prima2/clock.c | 509 +++++++++++
arch/arm/mach-prima2/common.h | 26 +
arch/arm/mach-prima2/include/mach/clkdev.h | 15 +
arch/arm/mach-prima2/include/mach/debug-macro.S | 29 +
arch/arm/mach-prima2/include/mach/entry-macro.S | 29 +
arch/arm/mach-prima2/include/mach/hardware.h | 15 +
arch/arm/mach-prima2/include/mach/io.h | 16 +
arch/arm/mach-prima2/include/mach/irqs.h | 17 +
arch/arm/mach-prima2/include/mach/map.h | 16 +
arch/arm/mach-prima2/include/mach/memory.h | 21 +
arch/arm/mach-prima2/include/mach/system.h | 29 +
arch/arm/mach-prima2/include/mach/timex.h | 14 +
arch/arm/mach-prima2/include/mach/uart.h | 23 +
arch/arm/mach-prima2/include/mach/uncompress.h | 40 +
arch/arm/mach-prima2/include/mach/vmalloc.h | 16 +
arch/arm/mach-prima2/irq.c | 71 ++
arch/arm/mach-prima2/l2x0.c | 59 ++
arch/arm/mach-prima2/lluart.c | 25 +
arch/arm/mach-prima2/prima2.c | 41 +
arch/arm/mach-prima2/rstc.c | 69 ++
arch/arm/mach-prima2/timer.c | 217 +++++
arch/arm/mach-pxa/balloon3.c | 1 +
arch/arm/mach-pxa/capc7117.c | 1 +
arch/arm/mach-pxa/clock.c | 15 +
arch/arm/mach-pxa/clock.h | 1 +
arch/arm/mach-pxa/cm-x2xx-pci.c | 3 +
arch/arm/mach-pxa/cm-x2xx.c | 5 +-
arch/arm/mach-pxa/cm-x300.c | 59 +-
arch/arm/mach-pxa/colibri-pxa270.c | 2 +
arch/arm/mach-pxa/colibri-pxa300.c | 1 +
arch/arm/mach-pxa/colibri-pxa320.c | 4 +-
arch/arm/mach-pxa/corgi.c | 3 +
arch/arm/mach-pxa/csb726.c | 4 +-
arch/arm/mach-pxa/em-x270.c | 2 +
arch/arm/mach-pxa/eseries.c | 6 +
arch/arm/mach-pxa/ezx.c | 6 +
arch/arm/mach-pxa/generic.h | 13 -
arch/arm/mach-pxa/gumstix.c | 1 +
arch/arm/mach-pxa/h5000.c | 2 +
arch/arm/mach-pxa/himalaya.c | 4 +-
arch/arm/mach-pxa/hx4700.c | 71 +--
arch/arm/mach-pxa/icontrol.c | 1 +
arch/arm/mach-pxa/idp.c | 1 +
arch/arm/mach-pxa/include/mach/hardware.h | 3 -
arch/arm/mach-pxa/include/mach/irqs.h | 12 +
arch/arm/mach-pxa/include/mach/magician.h | 3 +-
arch/arm/mach-pxa/include/mach/pxa25x.h | 9 +
arch/arm/mach-pxa/include/mach/pxa27x.h | 5 +
arch/arm/mach-pxa/include/mach/pxa300.h | 3 +-
arch/arm/mach-pxa/include/mach/pxa320.h | 3 +-
arch/arm/mach-pxa/include/mach/pxa3xx.h | 14 +
arch/arm/mach-pxa/include/mach/pxa930.h | 3 +-
arch/arm/mach-pxa/include/mach/regs-intc.h | 30 -
arch/arm/mach-pxa/irq.c | 36 +-
arch/arm/mach-pxa/littleton.c | 1 +
arch/arm/mach-pxa/lpd270.c | 1 +
arch/arm/mach-pxa/lubbock.c | 1 +
arch/arm/mach-pxa/magician.c | 58 +-
arch/arm/mach-pxa/mainstone.c | 1 +
arch/arm/mach-pxa/mfp-pxa2xx.c | 4 +-
arch/arm/mach-pxa/mioa701.c | 71 +--
arch/arm/mach-pxa/mp900.c | 1 +
arch/arm/mach-pxa/palmld.c | 1 +
arch/arm/mach-pxa/palmt5.c | 1 +
arch/arm/mach-pxa/palmtc.c | 4 +-
arch/arm/mach-pxa/palmte2.c | 3 +-
arch/arm/mach-pxa/palmtreo.c | 2 +
arch/arm/mach-pxa/palmtx.c | 1 +
arch/arm/mach-pxa/palmz72.c | 1 +
arch/arm/mach-pxa/pcm027.c | 1 +
arch/arm/mach-pxa/poodle.c | 1 +
arch/arm/mach-pxa/pxa3xx.c | 5 +-
arch/arm/mach-pxa/pxa95x.c | 1 -
arch/arm/mach-pxa/raumfeld.c | 8 +-
arch/arm/mach-pxa/saar.c | 1 +
arch/arm/mach-pxa/saarb.c | 3 +-
arch/arm/mach-pxa/spitz.c | 3 +
arch/arm/mach-pxa/stargate2.c | 2 +
arch/arm/mach-pxa/tavorevb.c | 1 +
arch/arm/mach-pxa/tavorevb3.c | 1 +
arch/arm/mach-pxa/tosa.c | 1 +
arch/arm/mach-pxa/trizeps4.c | 2 +
arch/arm/mach-pxa/viper.c | 1 +
arch/arm/mach-pxa/vpac270.c | 1 +
arch/arm/mach-pxa/xcep.c | 4 +-
arch/arm/mach-pxa/z2.c | 18 +
arch/arm/mach-pxa/zeus.c | 4 +-
arch/arm/mach-pxa/zylonite.c | 3 +-
arch/arm/mach-s3c2400/Kconfig | 7 -
arch/arm/mach-s3c2400/Makefile | 15 -
arch/arm/mach-s3c2400/gpio.c | 42 -
arch/arm/mach-s3c2400/include/mach/map.h | 66 --
arch/arm/mach-s3c2410/include/mach/gpio-fns.h | 6 -
arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 241 -----
arch/arm/mach-s3c2410/include/mach/regs-mem.h | 28 -
arch/arm/mach-s3c2412/Kconfig | 2 +-
arch/arm/mach-s3c24a0/include/mach/debug-macro.S | 27 -
arch/arm/mach-s3c24a0/include/mach/io.h | 18 -
arch/arm/mach-s3c24a0/include/mach/irqs.h | 117 ---
arch/arm/mach-s3c24a0/include/mach/map.h | 86 --
arch/arm/mach-s3c24a0/include/mach/memory.h | 21 -
arch/arm/mach-s3c24a0/include/mach/regs-clock.h | 88 --
arch/arm/mach-s3c24a0/include/mach/regs-irq.h | 25 -
arch/arm/mach-s3c24a0/include/mach/system.h | 25 -
arch/arm/mach-s3c24a0/include/mach/tick.h | 15 -
arch/arm/mach-s3c24a0/include/mach/timex.h | 18 -
arch/arm/mach-s3c24a0/include/mach/vmalloc.h | 17 -
arch/arm/mach-sa1100/include/mach/hardware.h | 8 -
arch/arm/mach-sa1100/pci-nanoengine.c | 3 +
arch/arm/mach-shark/include/mach/hardware.h | 6 -
arch/arm/mach-shark/pci.c | 12 +-
arch/arm/mach-tegra/board-harmony.c | 22 -
arch/arm/mach-tegra/board-paz00-pinmux.c | 10 +-
arch/arm/mach-tegra/board-paz00.c | 31 +-
arch/arm/mach-tegra/board-paz00.h | 10 +-
arch/arm/mach-tegra/board-seaboard.c | 26 +-
arch/arm/mach-tegra/board-trimslice-pinmux.c | 7 +-
arch/arm/mach-tegra/board-trimslice.c | 56 ++
arch/arm/mach-tegra/board-trimslice.h | 3 +
arch/arm/mach-tegra/devices.c | 53 +-
arch/arm/mach-tegra/include/mach/barriers.h | 30 -
arch/arm/mach-tegra/include/mach/system.h | 1 -
arch/arm/mach-tegra/io.c | 1 -
arch/arm/mach-tegra/pcie.c | 2 +
arch/arm/mach-tegra/platsmp.c | 3 +-
arch/arm/mach-tegra/tegra2_clocks.c | 4 +-
arch/arm/mach-u300/spi.c | 4 +-
arch/arm/mach-u300/timer.c | 33 +-
arch/arm/mach-ux500/Kconfig | 15 +-
arch/arm/mach-ux500/board-mop500-pins.c | 43 +
arch/arm/mach-ux500/board-mop500-regulators.c | 9 +-
arch/arm/mach-ux500/board-mop500-sdi.c | 61 +-
arch/arm/mach-ux500/board-mop500-uib.c | 2 +-
arch/arm/mach-ux500/board-mop500.c | 154 +++-
arch/arm/mach-ux500/board-mop500.h | 5 +
arch/arm/mach-ux500/clock.c | 48 +
arch/arm/mach-ux500/cpu-db5500.c | 1 +
arch/arm/mach-ux500/include/mach/uncompress.h | 3 +-
arch/arm/mach-ux500/usb.c | 1 +
arch/arm/mach-versatile/include/mach/hardware.h | 6 -
arch/arm/mach-versatile/pci.c | 3 +
arch/arm/mach-zynq/Makefile | 6 +
arch/arm/{mach-loki => mach-zynq}/Makefile.boot | 0
arch/arm/mach-zynq/common.c | 118 +++
.../include/mach/hardware.h => mach-zynq/common.h} | 20 +-
.../hardware.h => mach-zynq/include/mach/clkdev.h} | 26 +-
arch/arm/mach-zynq/include/mach/debug-macro.S | 36 +
.../include/mach/entry-macro.S} | 26 +-
.../include/mach/hardware.h | 18 +-
.../hardware.h => mach-zynq/include/mach/io.h} | 31 +-
.../hardware.h => mach-zynq/include/mach/irqs.h} | 19 +-
.../hardware.h => mach-zynq/include/mach/memory.h} | 20 +-
.../hardware.h => mach-zynq/include/mach/system.h} | 26 +-
.../hardware.h => mach-zynq/include/mach/timex.h} | 21 +-
.../hardware.h => mach-zynq/include/mach/uart.h} | 23 +-
arch/arm/mach-zynq/include/mach/uncompress.h | 51 ++
.../include/mach/vmalloc.h} | 18 +-
arch/arm/mach-zynq/include/mach/zynq_soc.h | 48 +
arch/arm/mach-zynq/timer.c | 298 +++++++
arch/arm/mm/Kconfig | 3 +-
arch/arm/mm/iomap.c | 12 +
arch/arm/mm/proc-xsc3.S | 1 -
arch/arm/plat-iop/pci.c | 3 +
arch/arm/plat-mxc/avic.c | 12 +-
arch/arm/plat-mxc/devices.c | 16 +-
arch/arm/plat-mxc/devices/platform-imx-dma.c | 204 +----
arch/arm/plat-mxc/devices/platform-imx-i2c.c | 3 +-
arch/arm/plat-mxc/devices/platform-imx-keypad.c | 5 +
arch/arm/plat-mxc/devices/platform-imx-ssi.c | 12 +-
arch/arm/plat-mxc/devices/platform-imx-uart.c | 2 +
arch/arm/plat-mxc/include/mach/debug-macro.S | 10 +-
arch/arm/plat-mxc/include/mach/devices-common.h | 6 +
arch/arm/plat-mxc/include/mach/hardware.h | 28 +-
arch/arm/plat-mxc/include/mach/iomux-mx25.h | 2 +-
arch/arm/plat-mxc/include/mach/iomux-mx53.h | 128 ++--
arch/arm/plat-mxc/include/mach/iomux-v1.h | 4 -
arch/arm/plat-mxc/include/mach/iomux-v3.h | 2 +-
arch/arm/plat-mxc/include/mach/iomux.h | 26 -
arch/arm/plat-mxc/include/mach/mx53.h | 54 +-
arch/arm/plat-mxc/include/mach/mxc.h | 8 +-
arch/arm/plat-mxc/include/mach/sdma.h | 6 +-
arch/arm/plat-mxc/include/mach/timex.h | 13 +-
arch/arm/plat-mxc/include/mach/uncompress.h | 1 +
arch/arm/plat-mxc/iomux-v1.c | 34 +-
arch/arm/plat-mxc/irq-common.c | 13 +-
arch/arm/plat-mxc/pwm.c | 8 +-
arch/arm/plat-mxc/tzic.c | 99 +--
arch/arm/plat-omap/Kconfig | 3 -
arch/arm/plat-omap/clock.c | 39 +
arch/arm/plat-omap/counter_32k.c | 123 +--
arch/arm/plat-omap/dmtimer.c | 213 +----
arch/arm/plat-omap/include/plat/clkdev_omap.h | 1 +
arch/arm/plat-omap/include/plat/clock.h | 4 +-
arch/arm/plat-omap/include/plat/common.h | 6 +-
arch/arm/plat-omap/include/plat/cpu.h | 35 +-
arch/arm/plat-omap/include/plat/dmtimer.h | 251 +++++-
arch/arm/plat-omap/include/plat/i2c.h | 6 +-
arch/arm/plat-omap/include/plat/irqs.h | 18 +-
arch/arm/plat-omap/include/plat/mcbsp.h | 74 +--
arch/arm/plat-omap/include/plat/nand.h | 6 +-
arch/arm/plat-omap/include/plat/omap-pm.h | 8 -
arch/arm/plat-omap/include/plat/omap4-keypad.h | 3 +-
arch/arm/plat-omap/include/plat/omap_hwmod.h | 35 +-
arch/arm/plat-omap/include/plat/uncompress.h | 1 +
arch/arm/plat-omap/iovmm.c | 6 +-
arch/arm/plat-omap/mcbsp.c | 604 +------------
arch/arm/plat-omap/omap_device.c | 94 ++-
arch/arm/plat-s3c24xx/Kconfig | 2 +-
arch/arm/plat-s3c24xx/cpu.c | 15 -
arch/arm/plat-s3c24xx/include/plat/regs-iis.h | 9 -
arch/arm/plat-s3c24xx/include/plat/regs-spi.h | 1 -
arch/arm/plat-s3c24xx/include/plat/s3c2400.h | 31 -
.../plat-samsung/include/plat/gpio-cfg-helpers.h | 2 +-
arch/arm/plat-samsung/include/plat/regs-serial.h | 8 -
arch/microblaze/include/asm/pci-bridge.h | 67 +--
arch/powerpc/include/asm/pci-bridge.h | 50 +-
arch/powerpc/include/asm/pci.h | 2 +-
arch/powerpc/kernel/pci-common.c | 22 +-
arch/powerpc/kernel/pci_32.c | 2 +-
arch/powerpc/kernel/pci_64.c | 4 +-
arch/powerpc/kernel/rtas_pci.c | 2 +-
arch/powerpc/platforms/40x/ep405.c | 2 +-
arch/powerpc/platforms/40x/ppc40x_simple.c | 2 +-
arch/powerpc/platforms/40x/walnut.c | 2 +-
arch/powerpc/platforms/44x/canyonlands.c | 2 +-
arch/powerpc/platforms/44x/ebony.c | 2 +-
arch/powerpc/platforms/44x/ppc44x_simple.c | 2 +-
arch/powerpc/platforms/44x/sam440ep.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_pci.c | 2 +-
arch/powerpc/platforms/82xx/pq2.c | 2 +-
arch/powerpc/platforms/chrp/pci.c | 2 +-
arch/powerpc/platforms/powermac/pci.c | 6 +-
arch/powerpc/sysdev/fsl_pci.c | 4 +-
arch/powerpc/sysdev/grackle.c | 2 +-
arch/powerpc/sysdev/ppc4xx_pci.c | 2 +-
drivers/dma/imx-dma.c | 3 +-
drivers/dma/imx-sdma.c | 6 +-
drivers/input/misc/Kconfig | 13 +-
drivers/input/misc/Makefile | 1 +
drivers/input/misc/twl4030-vibra.c | 12 +-
drivers/input/misc/twl6040-vibra.c | 423 +++++++++
drivers/mfd/Kconfig | 8 +-
drivers/mfd/Makefile | 3 +-
drivers/mfd/twl-core.c | 13 +-
drivers/mfd/twl4030-audio.c | 277 ++++++
drivers/mfd/twl4030-codec.c | 277 ------
drivers/mfd/twl6040-core.c | 620 +++++++++++++
drivers/mfd/twl6040-irq.c | 191 ++++
drivers/mmc/host/mxcmmc.c | 8 +-
drivers/pcmcia/pxa2xx_sharpsl.c | 3 -
drivers/pcmcia/pxa2xx_trizeps4.c | 4 -
drivers/tty/serial/Kconfig | 15 -
drivers/tty/serial/Makefile | 2 -
drivers/tty/serial/s3c2400.c | 105 ---
drivers/tty/serial/s3c24a0.c | 117 ---
include/asm-generic/pci-bridge.h | 62 ++
include/linux/i2c-omap.h | 27 +
include/linux/i2c/twl.h | 25 +-
.../linux/mfd/{twl4030-codec.h => twl4030-audio.h} | 16 +-
include/linux/mfd/twl6040.h | 228 +++++
sound/soc/codecs/Kconfig | 3 +-
sound/soc/codecs/twl4030.c | 22 +-
sound/soc/codecs/twl6040.c | 733 +++++++---------
sound/soc/codecs/twl6040.h | 119 +---
sound/soc/imx/imx-pcm-dma-mx2.c | 4 +-
sound/soc/omap/sdp3430.c | 2 +-
sound/soc/omap/sdp4430.c | 52 +-
sound/soc/omap/zoom2.c | 2 +-
523 files changed, 13192 insertions(+), 11436 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/sirf.txt
create mode 100644 Documentation/devicetree/bindings/arm/xilinx.txt
create mode 100644 arch/arm/boot/dts/prima2-cb.dts
create mode 100644 arch/arm/boot/dts/zynq-ep107.dts
delete mode 100644 arch/arm/configs/loki_defconfig
delete mode 100644 arch/arm/mach-cns3xxx/include/mach/hardware.h
delete mode 100644 arch/arm/mach-integrator/include/mach/bits.h
delete mode 100644 arch/arm/mach-loki/Kconfig
delete mode 100644 arch/arm/mach-loki/Makefile
delete mode 100644 arch/arm/mach-loki/addr-map.c
delete mode 100644 arch/arm/mach-loki/common.c
delete mode 100644 arch/arm/mach-loki/common.h
delete mode 100644 arch/arm/mach-loki/include/mach/bridge-regs.h
delete mode 100644 arch/arm/mach-loki/include/mach/debug-macro.S
delete mode 100644 arch/arm/mach-loki/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-loki/include/mach/hardware.h
delete mode 100644 arch/arm/mach-loki/include/mach/io.h
delete mode 100644 arch/arm/mach-loki/include/mach/irqs.h
delete mode 100644 arch/arm/mach-loki/include/mach/loki.h
delete mode 100644 arch/arm/mach-loki/include/mach/memory.h
delete mode 100644 arch/arm/mach-loki/include/mach/system.h
delete mode 100644 arch/arm/mach-loki/include/mach/timex.h
delete mode 100644 arch/arm/mach-loki/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-loki/include/mach/vmalloc.h
delete mode 100644 arch/arm/mach-loki/irq.c
delete mode 100644 arch/arm/mach-loki/lb88rc8480-setup.c
create mode 100644 arch/arm/mach-mmp/gplugd.c
create mode 100644 arch/arm/mach-mmp/include/mach/mfp-gplugd.h
create mode 100644 arch/arm/mach-mx5/board-mx53_ard.c
create mode 100644 arch/arm/mach-mx5/pm-imx5.c
create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
delete mode 100644 arch/arm/mach-omap2/timer-gp.c
delete mode 100644 arch/arm/mach-omap2/timer-gp.h
create mode 100644 arch/arm/mach-omap2/timer.c
create mode 100644 arch/arm/mach-omap2/twl-common.c
create mode 100644 arch/arm/mach-omap2/twl-common.h
create mode 100644 arch/arm/mach-prima2/Makefile
create mode 100644 arch/arm/mach-prima2/Makefile.boot
create mode 100644 arch/arm/mach-prima2/clock.c
create mode 100644 arch/arm/mach-prima2/common.h
create mode 100644 arch/arm/mach-prima2/include/mach/clkdev.h
create mode 100644 arch/arm/mach-prima2/include/mach/debug-macro.S
create mode 100644 arch/arm/mach-prima2/include/mach/entry-macro.S
create mode 100644 arch/arm/mach-prima2/include/mach/hardware.h
create mode 100644 arch/arm/mach-prima2/include/mach/io.h
create mode 100644 arch/arm/mach-prima2/include/mach/irqs.h
create mode 100644 arch/arm/mach-prima2/include/mach/map.h
create mode 100644 arch/arm/mach-prima2/include/mach/memory.h
create mode 100644 arch/arm/mach-prima2/include/mach/system.h
create mode 100644 arch/arm/mach-prima2/include/mach/timex.h
create mode 100644 arch/arm/mach-prima2/include/mach/uart.h
create mode 100644 arch/arm/mach-prima2/include/mach/uncompress.h
create mode 100644 arch/arm/mach-prima2/include/mach/vmalloc.h
create mode 100644 arch/arm/mach-prima2/irq.c
create mode 100644 arch/arm/mach-prima2/l2x0.c
create mode 100644 arch/arm/mach-prima2/lluart.c
create mode 100644 arch/arm/mach-prima2/prima2.c
create mode 100644 arch/arm/mach-prima2/rstc.c
create mode 100644 arch/arm/mach-prima2/timer.c
create mode 100644 arch/arm/mach-pxa/include/mach/pxa3xx.h
delete mode 100644 arch/arm/mach-pxa/include/mach/regs-intc.h
delete mode 100644 arch/arm/mach-s3c2400/Kconfig
delete mode 100644 arch/arm/mach-s3c2400/Makefile
delete mode 100644 arch/arm/mach-s3c2400/gpio.c
delete mode 100644 arch/arm/mach-s3c2400/include/mach/map.h
delete mode 100644 arch/arm/mach-s3c24a0/include/mach/debug-macro.S
delete mode 100644 arch/arm/mach-s3c24a0/include/mach/io.h
delete mode 100644 arch/arm/mach-s3c24a0/include/mach/irqs.h
delete mode 100644 arch/arm/mach-s3c24a0/include/mach/map.h
delete mode 100644 arch/arm/mach-s3c24a0/include/mach/memory.h
delete mode 100644 arch/arm/mach-s3c24a0/include/mach/regs-clock.h
delete mode 100644 arch/arm/mach-s3c24a0/include/mach/regs-irq.h
delete mode 100644 arch/arm/mach-s3c24a0/include/mach/system.h
delete mode 100644 arch/arm/mach-s3c24a0/include/mach/tick.h
delete mode 100644 arch/arm/mach-s3c24a0/include/mach/timex.h
delete mode 100644 arch/arm/mach-s3c24a0/include/mach/vmalloc.h
delete mode 100644 arch/arm/mach-tegra/include/mach/barriers.h
create mode 100644 arch/arm/mach-zynq/Makefile
rename arch/arm/{mach-loki => mach-zynq}/Makefile.boot (100%)
create mode 100644 arch/arm/mach-zynq/board_dt.c
create mode 100644 arch/arm/mach-zynq/common.c
copy arch/arm/{mach-tegra/include/mach/hardware.h => mach-zynq/common.h} (58%)
copy arch/arm/{mach-tegra/include/mach/hardware.h => mach-zynq/include/mach/clkdev.h} (57%)
create mode 100644 arch/arm/mach-zynq/include/mach/debug-macro.S
copy arch/arm/{mach-tegra/include/mach/hardware.h => mach-zynq/include/mach/entry-macro.S} (51%)
copy arch/arm/{mach-tegra => mach-zynq}/include/mach/hardware.h (58%)
copy arch/arm/{mach-tegra/include/mach/hardware.h => mach-zynq/include/mach/io.h} (52%)
copy arch/arm/{mach-tegra/include/mach/hardware.h => mach-zynq/include/mach/irqs.h} (58%)
copy arch/arm/{mach-tegra/include/mach/hardware.h => mach-zynq/include/mach/memory.h} (58%)
copy arch/arm/{mach-tegra/include/mach/hardware.h => mach-zynq/include/mach/system.h} (58%)
copy arch/arm/{mach-tegra/include/mach/hardware.h => mach-zynq/include/mach/timex.h} (58%)
copy arch/arm/{mach-tegra/include/mach/hardware.h => mach-zynq/include/mach/uart.h} (53%)
create mode 100644 arch/arm/mach-zynq/include/mach/uncompress.h
rename arch/arm/{mach-tegra/include/mach/hardware.h => mach-zynq/include/mach/vmalloc.h} (58%)
create mode 100644 arch/arm/mach-zynq/include/mach/zynq_soc.h
create mode 100644 arch/arm/mach-zynq/timer.c
delete mode 100644 arch/arm/plat-mxc/include/mach/iomux.h
delete mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2400.h
create mode 100644 drivers/input/misc/twl6040-vibra.c
create mode 100644 drivers/mfd/twl4030-audio.c
delete mode 100644 drivers/mfd/twl4030-codec.c
create mode 100644 drivers/mfd/twl6040-core.c
create mode 100644 drivers/mfd/twl6040-irq.c
delete mode 100644 drivers/tty/serial/s3c2400.c
delete mode 100644 drivers/tty/serial/s3c24a0.c
create mode 100644 include/asm-generic/pci-bridge.h
rename include/linux/mfd/{twl4030-codec.h => twl4030-audio.h} (96%)
create mode 100644 include/linux/mfd/twl6040.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists