| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.LNX.2.00.1107211428020.30225@swampdragon.chaosbits.net> Date: Thu, 21 Jul 2011 14:31:22 +0200 (CEST) From: Jesper Juhl <jj@...osbits.net> To: Michael Krufky <mkrufky@...nellabs.com> cc: linux-media@...r.kernel.org, Mike Isely <isely@...ox.com>, Aurelien Alleaume <slts@...e.fr>, Mauro Carvalho Chehab <mchehab@...radead.org>, linux-kernel@...r.kernel.org, Michael Krufky <mkrufky@...uxtv.org> Subject: Re: Hauppauge model 73219 rev D1F5 tuner doesn't detect signal, older rev D1E9 works On Thu, 21 Jul 2011, Jesper Juhl wrote: > On Tue, 19 Jul 2011, Michael Krufky wrote: > > > On Tue, Jul 19, 2011 at 3:37 AM, Jesper Juhl <jj@...osbits.net> wrote: > > > Hi > > > > > > I have a bunch of Hauppauge HVR-1900 model 73219's, some are revision D1E9 > > > and work perfectly, but with the newer revision D1F5's the tuner fails to > > > detect a signal and consequently just gives me blank output on > > > /dev/video0. Other input sources, like composite or s-video, work just > > > fine on the new revision, it's just the tuner that does not work. > > > > ... > > > > > > If I now do 'cat /dev/video0 > test.mpg' I get a perfectly valid MPEG > > > stream, but a rather boring one - just a black display and no audio. > > > > > > With the old D1E9 revision I get > > > > > > [root@...gon ~]# cat /sys/class/pvrusb2/sn-6569758/ctl_signal_present/cur_val > > > 65535 > > > [root@...gon ~]# > > > > > > and 'cat /dev/video0 > test.mpg' gives me the stream I'd expect (as in > > > actual contents, not just a black screen). > > > > > > Any ideas on how to fix this? > > > > > > I can test any patches you may come up with and if there's any further > > > information you need from me in order to get an idea about what the > > > problem is, then just ask. > > > > > > Please CC me on replies since I'm not subscribed to the linux-media list. > > > > > Ok, so things did change a bit :-) > > I still get a 0 when I cat ctl_signal_present/cur_val , but I no longer > get just a black stream from the bideo device now I get static and very > badly tuned "images". See for example: > http://personal.chaosbits.net/hauppauge-pvr-1900-test.mpg which is the > result of > cat /dev/video1 > /tmp/hauppauge-pvr-1900-test.mpg & seq 147250280 147250310 | while read i; do echo $i > /sys/class/pvrusb2/sn-6569758/ctl_frequency/cur_val; sleep 2; done ; killall cat > > (warning - large file - ~65MB) > > Definately an improvement. > > Forgot to include dmesg output with the patch applied: [ 6409.476538] usb 2-1.1: new high speed USB device number 3 using ehci_hcd [ 6409.564990] pvrusb2: Hardware description: WinTV HVR-1900 Model 73xxx [ 6410.884764] pvrusb2: Device microcontroller firmware (re)loaded; it should now reset and reconnect. [ 6411.082496] usb 2-1.1: USB disconnect, device number 3 [ 6411.082642] pvrusb2: Device being rendered inoperable [ 6412.803437] usb 2-1.1: new high speed USB device number 4 using ehci_hcd [ 6412.897974] pvrusb2: Hardware description: WinTV HVR-1900 Model 73xxx [ 6412.929980] pvrusb2: Binding ir_rx_z8f0811_haup to i2c address 0x71. [ 6412.930004] pvrusb2: Binding ir_tx_z8f0811_haup to i2c address 0x70. [ 6412.933293] cx25840 18-0044: cx25843-24 found @ 0x88 (pvrusb2_a) [ 6412.944105] pvrusb2: Attached sub-driver cx25840 [ 6412.947852] tuner 18-0042: Tuner -1 found with type(s) Radio TV. [ 6412.947856] pvrusb2: Attached sub-driver tuner [ 6415.150802] cx25840 18-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 6415.253458] tveeprom 18-00a2: Hauppauge model 73219, rev D1F5, serial# 6569758 [ 6415.253463] tveeprom 18-00a2: MAC address is 00:0d:fe:64:3f:1e [ 6415.253467] tveeprom 18-00a2: tuner model is NXP 18271C2 (idx 155, type 54) [ 6415.253471] tveeprom 18-00a2: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) [ 6415.253475] tveeprom 18-00a2: audio processor is CX25843 (idx 37) [ 6415.253478] tveeprom 18-00a2: decoder processor is CX25843 (idx 30) [ 6415.253481] tveeprom 18-00a2: has radio, has IR receiver, has IR transmitter [ 6415.253593] pvrusb2: Supported video standard(s) reported available in hardware: PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K [ 6415.253604] pvrusb2: Mapping standards mask=0x3ff00ff (PAL-B/B1/D/D1/G/H/I/K;SECAM-B/D/G/H/K/K1/L/LC;ATSC-8VSB/16VSB) [ 6415.253612] pvrusb2: Setting up 20 unique standard(s) [ 6415.253615] pvrusb2: Set up standard idx=0 name=PAL-B/G [ 6415.253617] pvrusb2: Set up standard idx=1 name=PAL-D/K [ 6415.253620] pvrusb2: Set up standard idx=2 name=SECAM-B/G [ 6415.253622] pvrusb2: Set up standard idx=3 name=SECAM-D/K [ 6415.253625] pvrusb2: Set up standard idx=4 name=PAL-B [ 6415.253627] pvrusb2: Set up standard idx=5 name=PAL-B1 [ 6415.253629] pvrusb2: Set up standard idx=6 name=PAL-G [ 6415.253631] pvrusb2: Set up standard idx=7 name=PAL-H [ 6415.253633] pvrusb2: Set up standard idx=8 name=PAL-I [ 6415.253635] pvrusb2: Set up standard idx=9 name=PAL-D [ 6415.253638] pvrusb2: Set up standard idx=10 name=PAL-D1 [ 6415.253640] pvrusb2: Set up standard idx=11 name=PAL-K [ 6415.253642] pvrusb2: Set up standard idx=12 name=SECAM-B [ 6415.253644] pvrusb2: Set up standard idx=13 name=SECAM-D [ 6415.253647] pvrusb2: Set up standard idx=14 name=SECAM-G [ 6415.253649] pvrusb2: Set up standard idx=15 name=SECAM-H [ 6415.253651] pvrusb2: Set up standard idx=16 name=SECAM-K [ 6415.253653] pvrusb2: Set up standard idx=17 name=SECAM-K1 [ 6415.253655] pvrusb2: Set up standard idx=18 name=SECAM-L [ 6415.253658] pvrusb2: Set up standard idx=19 name=SECAM-LC [ 6415.253660] pvrusb2: Initial video standard auto-selected to PAL-B/G [ 6415.253668] pvrusb2: Device initialization completed successfully. [ 6415.253826] pvrusb2: registered device video1 [mpeg] [ 6415.253830] DVB: registering new adapter (pvrusb2-dvb) [ 6417.510870] cx25840 18-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 6417.627793] tda829x 18-0042: setting tuner address to 60 [ 6417.651036] tda18271 18-0060: creating new instance [ 6417.687778] TDA18271HD/C2 detected @ 18-0060 [ 6419.571379] tda18271: performing RF tracking filter calibration [ 6432.586119] tda18271: RF tracking filter calibration complete [ 6432.629500] tda829x 18-0042: type set to tda8295+18271 [ 6437.466724] cx25840 18-0044: 0x0000 is not a valid video input! [ 6437.498898] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)... [ 6437.500315] tda829x 18-0042: type set to tda8295 [ 6437.535451] tda18271 18-0060: attaching existing instance [ 6454.052596] cx25840 18-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 7318.909006] pvrusb2: ***WARNING*** device's encoder appears to be stuck (status=0x00000003) [ 7318.909012] pvrusb2: Encoder command: 0x81 [ 7318.909015] pvrusb2: Giving up on command. This is normally recovered via a firmware reload and re-initialization; concern is only warranted if this happens repeatedly and rapidly. [ 8413.977059] pvrusb2: ***WARNING*** device's encoder appears to be stuck (status=0x00000003) [ 8413.977065] pvrusb2: Encoder command: 0x81 [ 8413.977068] pvrusb2: Giving up on command. This is normally recovered via a firmware reload and re-initialization; concern is only warranted if this happens repeatedly and rapidly. [ 8792.114989] usb 2-1.1: USB disconnect, device number 4 [ 8792.115138] pvrusb2: Device being rendered inoperable [ 8792.115371] pvrusb2: unregistered device video1 [mpeg] [ 8792.115461] pvrusb2: unregistering DVB devices [ 8792.115926] tda18271 18-0060: destroying instance I guess I should also mention that I applied the patch to a up-to-date mainline kernel from git: $ uname -a Linux dragon 3.0.0-rc7-JJ-00176-gcf6ace1-dirty #4 SMP PREEMPT Thu Jul 21 11:06:43 CEST 2011 x86_64 Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz GenuineIntel GNU/Linux -- Jesper Juhl <jj@...osbits.net> http://www.chaosbits.net/ Don't top-post http://www.catb.org/jargon/html/T/top-post.html Plain text mails only, please. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists