lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1311207599-2553-5-git-send-email-tomoya-linux@dsn.okisemi.com>
Date:	Thu, 21 Jul 2011 09:19:58 +0900
From:	Tomoya MORINAGA <tomoya-linux@....okisemi.com>
To:	Grant Likely <grant.likely@...retlab.ca>,
	linux-kernel@...r.kernel.org, alexander.stein@...tec-electronic.com
Cc:	qi.wang@...el.com, yong.y.wang@...el.com, joel.clark@...el.com,
	kok.howg.ewe@...el.com, toshiharu-linux@....okisemi.com,
	Tomoya MORINAGA <tomoya-linux@....okisemi.com>
Subject: [PATCH 5/6 v2] gpio-pch: Save register value in suspend()

Currently, when suspend is occurred, register im0/1 and gpio_use_sel are not
saved.
This patch modifies so that register im0/1 and gpio_use_sel are saved.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
---
 drivers/gpio/gpio-pch.c |   22 +++++++++++++++++++++-
 1 files changed, 21 insertions(+), 1 deletions(-)

diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index 4ac69bd..7f773af 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -30,7 +30,8 @@ struct pch_regs {
 	u32	pm;
 	u32	im0;
 	u32	im1;
-	u32	reserved[4];
+	u32	reserved[3];
+	u32	gpio_use_sel;
 	u32	reset;
 };
 
@@ -51,10 +52,17 @@ static int gpio_pins[] = {
  * struct pch_gpio_reg_data - The register store data.
  * @po_reg:	To store contents of PO register.
  * @pm_reg:	To store contents of PM register.
+ * @im0_reg:	To store contents of IM0 register.
+ * @im1_reg:	To store contents of IM1 register.
+ * @gpio_use_sel_reg : To store contents of GPIO_USE_SEL register.
+ *		       (Only ML7223 Bus-n)
  */
 struct pch_gpio_reg_data {
 	u32 po_reg;
 	u32 pm_reg;
+	u32 im0_reg;
+	u32 im1_reg;
+	u32 gpio_use_sel_reg;
 };
 
 /**
@@ -149,6 +157,12 @@ static void pch_gpio_save_reg_conf(struct pch_gpio *chip)
 {
 	chip->pch_gpio_reg.po_reg = ioread32(&chip->reg->po);
 	chip->pch_gpio_reg.pm_reg = ioread32(&chip->reg->pm);
+	chip->pch_gpio_reg.im0_reg = ioread32(&chip->reg->im0);
+	if (chip->ioh == INTEL_EG20T_PCH)
+		chip->pch_gpio_reg.im1_reg = ioread32(&chip->reg->im1);
+	if (chip->ioh == OKISEMI_ML7223n_IOH)
+		chip->pch_gpio_reg.gpio_use_sel_reg =\
+					    ioread32(&chip->reg->gpio_use_sel);
 }
 
 /*
@@ -160,6 +174,12 @@ static void pch_gpio_restore_reg_conf(struct pch_gpio *chip)
 	iowrite32(chip->pch_gpio_reg.po_reg, &chip->reg->po);
 	/* to store contents of PM register */
 	iowrite32(chip->pch_gpio_reg.pm_reg, &chip->reg->pm);
+	iowrite32(chip->pch_gpio_reg.im0_reg, &chip->reg->im0);
+	if (chip->ioh == INTEL_EG20T_PCH)
+		iowrite32(chip->pch_gpio_reg.im1_reg, &chip->reg->im1);
+	if (chip->ioh == OKISEMI_ML7223n_IOH)
+		iowrite32(chip->pch_gpio_reg.gpio_use_sel_reg,
+			  &chip->reg->gpio_use_sel);
 }
 
 static void pch_gpio_setup(struct pch_gpio *chip)
-- 
1.7.4.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ