linux-kernel - [PATCH 1/2] x86, ioapic: Print out irte with right ioapic index

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4E29BEEA.4020600@kernel.org>
Date:	Fri, 22 Jul 2011 11:18:18 -0700
From:	Yinghai Lu <yinghai@...nel.org>
To:	Thomas Gleixner <tglx@...utronix.de>, Ingo Molnar <mingo@...e.hu>,
	"H. Peter Anvin" <hpa@...or.com>,
	Naga Chumbalkar <nagananda.chumbalkar@...com>
CC:	Bjorn Helgaas <bhelgaas@...gle.com>,
	Suresh Siddha <suresh.b.siddha@...el.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: [PATCH 1/2] x86, ioapic: Print out irte  with right ioapic index


While checking irte dump in dmesg, the print out is confused ioapic index
and real io apic id.

IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
IOAPIC[1]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001 SID:00FF SQ:0 SVT:1)
IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
IOAPIC[1]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000001 SID:00FF SQ:0 SVT:1)

The system first ioapic id is 1.

Try to fix it with passing ioapic idx instead of phys apic id.

Signed-off-by: Yinghai Lu <yinghai@...nel.org>

---
 arch/x86/kernel/apic/io_apic.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -1255,7 +1255,7 @@ static void ioapic_register_intr(unsigne
 				      fasteoi ? "fasteoi" : "edge");
 }
 
-static int setup_ioapic_entry(int apic_id, int irq,
+static int setup_ioapic_entry(int ioapic, int irq,
 			      struct IO_APIC_route_entry *entry,
 			      unsigned int destination, int trigger,
 			      int polarity, int vector, int pin)
@@ -1266,6 +1266,7 @@ static int setup_ioapic_entry(int apic_i
 	memset(entry,0,sizeof(*entry));
 
 	if (intr_remapping_enabled) {
+		int apic_id = mpc_ioapic_id(ioapic);
 		struct intel_iommu *iommu = map_ioapic_to_ir(apic_id);
 		struct irte irte;
 		struct IR_IO_APIC_route_entry *ir_entry =
@@ -1301,7 +1302,7 @@ static int setup_ioapic_entry(int apic_i
 			"Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
 			"Avail:%X Vector:%02X Dest:%08X "
 			"SID:%04X SQ:%X SVT:%X)\n",
-			apic_id, irte.present, irte.fpd, irte.dst_mode,
+			ioapic, irte.present, irte.fpd, irte.dst_mode,
 			irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
 			irte.avail, irte.vector, irte.dest_id,
 			irte.sid, irte.sq, irte.svt);
@@ -1352,7 +1353,7 @@ static void setup_ioapic_irq(int apic_id
 		    irq, trigger, polarity, dest);
 
 
-	if (setup_ioapic_entry(mpc_ioapic_id(apic_id), irq, &entry,
+	if (setup_ioapic_entry(apic_id, irq, &entry,
 			       dest, trigger, polarity, cfg->vector, pin)) {
 		printk("Failed to setup ioapic entry for ioapic  %d, pin %d\n",
 		       mpc_ioapic_id(apic_id), pin);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/