[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20110805143732.GH1928@minipsycho.orion>
Date: Fri, 5 Aug 2011 16:37:33 +0200
From: Jiri Pirko <jpirko@...hat.com>
To: Ingo Molnar <mingo@...e.hu>
Cc: David Miller <davem@...emloft.net>, torvalds@...ux-foundation.org,
akpm@...ux-foundation.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [forcedeth bug] Re: [GIT] Networking
Fri, Aug 05, 2011 at 02:31:37PM CEST, jpirko@...hat.com wrote:
>Fri, Aug 05, 2011 at 02:18:55PM CEST, mingo@...e.hu wrote:
>>
>>* Jiri Pirko <jpirko@...hat.com> wrote:
>>
>>> >> Is DEV_HAS_VLAN set in id->driver_data (L5344) ?
>>> >
>>> >How do i tell that without hacking the driver?
>>>
>>> look in dmesg for line like:
>>> "forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi
>>> desc-v3"
>>>
>>> if "vlan" is there, DEV_HAS_VLAN is set
>>
>>[ 3.534489] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
>>
>>Note, this is a pretty old system with an old nvidia chipset and
>>on-board ethernet:
>>
>>00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
>> Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>> Latency: 0 (250ns min, 5000ns max)
>> Interrupt: pin A routed to IRQ 11
>> Region 0: Memory at da100000 (32-bit, non-prefetchable) [size=4K]
>> Region 1: I/O ports at d000 [size=8]
>> Capabilities: [44] Power Management version 2
>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>> Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>
>Please do lspci -nn
>
>There are two CK804 chips:
>0x10DE, 0x0056
>0x10DE, 0x0057
>
>I have only the second one handy - Getting the machine as we speak.
I'm unable to see problems you are referring to on my machine.
Would you please try following patch if it fixes your issue? It's
in fact returning everything back to the original state (for your card).
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index e55df30..d7d43d4 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -2763,18 +2763,18 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
skb->protocol = eth_type_trans(skb, dev);
prefetch(skb->data);
- vlanflags = le32_to_cpu(np->get_rx.ex->buflow);
-
/*
* There's need to check for NETIF_F_HW_VLAN_RX here.
* Even if vlan rx accel is disabled,
* NV_RX3_VLAN_TAG_PRESENT is pseudo randomly set.
*/
- if (dev->features & NETIF_F_HW_VLAN_RX &&
- vlanflags & NV_RX3_VLAN_TAG_PRESENT) {
- u16 vid = vlanflags & NV_RX3_VLAN_TAG_MASK;
+ if (dev->features & NETIF_F_HW_VLAN_RX) {
+ vlanflags = le32_to_cpu(np->get_rx.ex->buflow);
+ if (vlanflags & NV_RX3_VLAN_TAG_PRESENT) {
+ u16 vid = vlanflags & NV_RX3_VLAN_TAG_MASK;
- __vlan_hwaccel_put_tag(skb, vid);
+ __vlan_hwaccel_put_tag(skb, vid);
+ }
}
napi_gro_receive(&np->napi, skb);
@@ -5615,7 +5615,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
goto out_error;
}
- nv_vlan_mode(dev, dev->features);
+ //nv_vlan_mode(dev, dev->features);
netif_carrier_off(dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists