| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1312517062-5582-2-git-send-email-tomoya-linux@dsn.okisemi.com>
Date: Fri, 5 Aug 2011 13:04:21 +0900
From: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
To: Grant Likely <grant.likely@...retlab.ca>,
linux-kernel@...r.kernel.org, alexander.stein@...tec-electronic.com
Cc: qi.wang@...el.com, yong.y.wang@...el.com, joel.clark@...el.com,
kok.howg.ewe@...el.com, toshiharu-linux@....okisemi.com,
Tomoya MORINAGA <tomoya-linux@....okisemi.com>
Subject: [PATCH 2/3] gpio-ml-ioh: Support interrupt function
Signed-off-by: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
---
drivers/gpio/Kconfig | 1 +
drivers/gpio/gpio-ml-ioh.c | 209 +++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 207 insertions(+), 3 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 5d9ff05..7a4e72d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -387,6 +387,7 @@ config GPIO_PCH
config GPIO_ML_IOH
tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
depends on PCI
+ select GENERIC_IRQ_CHIP
help
ML7213 is companion chip for Intel Atom E6xx series.
This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index 655e55c..4fab37b 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -18,6 +18,17 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#define IOH_EDGE_FALLING 0
+#define IOH_EDGE_RISING BIT(0)
+#define IOH_LEVEL_L BIT(1)
+#define IOH_LEVEL_H (BIT(0) | BIT(1))
+#define IOH_EDGE_BOTH BIT(2)
+#define IOH_IM_MASK (BIT(0) | BIT(1) | BIT(2))
+
+#define IOH_IRQ_BASE 0
#define PCI_VENDOR_ID_ROHM 0x10DB
@@ -46,12 +57,20 @@ struct ioh_regs {
/**
* struct ioh_gpio_reg_data - The register store data.
+ * @ien_reg To store contents of interrupt enable register.
+ * @imask_reg: To store contents of interrupt mask regist
* @po_reg: To store contents of PO register.
* @pm_reg: To store contents of PM register.
+ * @im0_reg: To store contents of interrupt mode regist0
+ * @im1_reg: To store contents of interrupt mode regist1
*/
struct ioh_gpio_reg_data {
+ u32 ien_reg;
+ u32 imask_reg;
u32 po_reg;
u32 pm_reg;
+ u32 im0_reg;
+ u32 im1_reg;
};
/**
@@ -63,6 +82,9 @@ struct ioh_gpio_reg_data {
* @ioh_gpio_reg: Memory mapped Register data is saved here
* when suspend.
* @ch: Indicate GPIO channel
+ * @irq_base: Save base of IRQ number for interrupt
+ * @spinlock: Used for register access protection in
+ * interrupt context ioh_irq_type and PM;
*/
struct ioh_gpio {
void __iomem *base;
@@ -72,6 +94,8 @@ struct ioh_gpio {
struct ioh_gpio_reg_data ioh_gpio_reg;
struct mutex lock;
int ch;
+ int irq_base;
+ spinlock_t spinlock;
};
static const int num_ports[] = {6, 12, 16, 16, 15, 16, 16, 12};
@@ -147,6 +171,10 @@ static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip)
{
chip->ioh_gpio_reg.po_reg = ioread32(&chip->reg->regs[chip->ch].po);
chip->ioh_gpio_reg.pm_reg = ioread32(&chip->reg->regs[chip->ch].pm);
+ chip->ioh_gpio_reg.ien_reg = ioread32(&chip->reg->regs[chip->ch].ien);
+ chip->ioh_gpio_reg.imask_reg = ioread32(&chip->reg->regs[chip->ch].imask);
+ chip->ioh_gpio_reg.im0_reg = ioread32(&chip->reg->regs[chip->ch].im_0);
+ chip->ioh_gpio_reg.im1_reg = ioread32(&chip->reg->regs[chip->ch].im_1);
}
/*
@@ -154,13 +182,21 @@ static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip)
*/
static void ioh_gpio_restore_reg_conf(struct ioh_gpio *chip)
{
- /* to store contents of PO register */
iowrite32(chip->ioh_gpio_reg.po_reg, &chip->reg->regs[chip->ch].po);
- /* to store contents of PM register */
iowrite32(chip->ioh_gpio_reg.pm_reg, &chip->reg->regs[chip->ch].pm);
+ iowrite32(chip->ioh_gpio_reg.ien_reg, &chip->reg->regs[chip->ch].ien);
+ iowrite32(chip->ioh_gpio_reg.imask_reg, &chip->reg->regs[chip->ch].imask);
+ iowrite32(chip->ioh_gpio_reg.im0_reg, &chip->reg->regs[chip->ch].im_0);
+ iowrite32(chip->ioh_gpio_reg.im1_reg, &chip->reg->regs[chip->ch].im_1);
}
#endif
+static int ioh_gpio_to_irq(struct gpio_chip *gpio, unsigned offset)
+{
+ struct ioh_gpio *chip = container_of(gpio, struct ioh_gpio, gpio);
+ return chip->irq_base + offset;
+}
+
static void ioh_gpio_setup(struct ioh_gpio *chip, int num_port)
{
struct gpio_chip *gpio = &chip->gpio;
@@ -175,16 +211,148 @@ static void ioh_gpio_setup(struct ioh_gpio *chip, int num_port)
gpio->base = -1;
gpio->ngpio = num_port;
gpio->can_sleep = 0;
+ gpio->to_irq = ioh_gpio_to_irq;
+}
+
+static int ioh_irq_type(struct irq_data *d, unsigned int type)
+{
+ u32 im;
+ u32 *im_reg;
+ u32 ien;
+ u32 im_pos;
+ int ch;
+ unsigned long flags;
+ u32 val;
+ int irq = d->irq;
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct ioh_gpio *chip = gc->private;
+
+ ch = irq - chip->irq_base;
+ if (irq <= chip->irq_base + 7) {
+ im_reg = &chip->reg->regs[chip->ch].im_0;
+ im_pos = ch;
+ } else {
+ im_reg = &chip->reg->regs[chip->ch].im_1;
+ im_pos = ch - 8;
+ }
+ dev_dbg(chip->dev, "%s:irq=%d type=%d ch=%d pos=%d type=%d\n",
+ __func__, irq, type, ch, im_pos, type);
+
+ spin_lock_irqsave(&chip->spinlock, flags);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ val = IOH_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ val = IOH_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ val = IOH_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ val = IOH_LEVEL_H;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ val = IOH_LEVEL_L;
+ break;
+ case IRQ_TYPE_PROBE:
+ goto end;
+ default:
+ dev_warn(chip->dev, "%s: unknown type(%dd)",
+ __func__, type);
+ goto end;
+ }
+
+ /* Set interrupt mode */
+ im = ioread32(im_reg) & ~(IOH_IM_MASK << (im_pos * 4));
+ iowrite32(im | (val << (im_pos * 4)), im_reg);
+
+ /* iclr */
+ iowrite32(BIT(ch), &chip->reg->regs[chip->ch].iclr);
+
+ /* IMASKCLR */
+ iowrite32(BIT(ch), &chip->reg->regs[chip->ch].imaskclr);
+
+ /* Enable interrupt */
+ ien = ioread32(&chip->reg->regs[chip->ch].ien);
+ iowrite32(ien | BIT(ch), &chip->reg->regs[chip->ch].ien);
+end:
+ spin_unlock_irqrestore(&chip->spinlock, flags);
+
+ return 0;
+}
+
+static void ioh_irq_unmask(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct ioh_gpio *chip = gc->private;
+
+ iowrite32(1 << (d->irq - chip->irq_base),
+ &chip->reg->regs[chip->ch].imaskclr);
+}
+
+static void ioh_irq_mask(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct ioh_gpio *chip = gc->private;
+
+ iowrite32(1 << (d->irq - chip->irq_base),
+ &chip->reg->regs[chip->ch].imask);
+}
+
+static irqreturn_t ioh_gpio_handler(int irq, void *dev_id)
+{
+ struct ioh_gpio *chip = dev_id;
+ u32 reg_val;
+ int i, j;
+ int ret = IRQ_NONE;
+
+ for (i = 0; i < 8; i++) {
+ reg_val = ioread32(&chip->reg->regs[i].istatus);
+ for (j = 0; j < num_ports[i]; j++) {
+ if (reg_val & BIT(j)) {
+ dev_dbg(chip->dev,
+ "%s:[%d]:irq=%d status=0x%x\n",
+ __func__, j, irq, reg_val);
+ iowrite32(BIT(j),
+ &chip->reg->regs[chip->ch].iclr);
+ generic_handle_irq(chip->irq_base + j);
+ ret = IRQ_HANDLED;
+ }
+ }
+ }
+ return ret;
+}
+
+static __devinit void ioh_gpio_alloc_generic_chip(struct ioh_gpio *chip,
+ unsigned int irq_start, unsigned int num)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("ioh_gpio", 1, irq_start, chip->base,
+ handle_simple_irq);
+ gc->private = chip;
+ ct = gc->chip_types;
+
+ ct->chip.irq_mask = ioh_irq_mask;
+ ct->chip.irq_unmask = ioh_irq_unmask;
+ ct->chip.irq_set_type = ioh_irq_type;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
static int __devinit ioh_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int ret;
- int i;
+ int i, j;
struct ioh_gpio *chip;
void __iomem *base;
void __iomem *chip_save;
+ int irq_base;
ret = pci_enable_device(pdev);
if (ret) {
@@ -228,10 +396,41 @@ static int __devinit ioh_gpio_probe(struct pci_dev *pdev,
}
chip = chip_save;
+ for (j = 0; j < 8; j++, chip++) {
+ irq_base = irq_alloc_descs(-1, IOH_IRQ_BASE, num_ports[j],
+ GFP_KERNEL);
+ if (irq_base < 0) {
+ dev_warn(&pdev->dev,
+ "ml_ioh_gpio: Failed to get IRQ base num\n");
+ chip->irq_base = -1;
+ goto err_irq_alloc_descs;
+ }
+ chip->irq_base = irq_base;
+ ioh_gpio_alloc_generic_chip(chip, irq_base, num_ports[j]);
+ }
+
+ chip = chip_save;
+ ret = request_irq(pdev->irq, ioh_gpio_handler,
+ IRQF_SHARED, KBUILD_MODNAME, chip);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "%s request_irq failed\n", __func__);
+ goto err_request_irq;
+ }
+
pci_set_drvdata(pdev, chip);
return 0;
+err_request_irq:
+ chip = chip_save;
+err_irq_alloc_descs:
+ while (--j >= 0) {
+ chip--;
+ irq_free_descs(chip->irq_base, num_ports[j]);
+ }
+
+ chip = chip_save;
err_gpiochip_add:
while (--i >= 0) {
chip--;
@@ -264,7 +463,11 @@ static void __devexit ioh_gpio_remove(struct pci_dev *pdev)
void __iomem *chip_save;
chip_save = chip;
+
+ free_irq(pdev->irq, chip);
+
for (i = 0; i < 8; i++, chip++) {
+ irq_free_descs(chip->irq_base, num_ports[i]);
err = gpiochip_remove(&chip->gpio);
if (err)
dev_err(&pdev->dev, "Failed gpiochip_remove\n");
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists