| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1312948364-2587-3-git-send-email-lars@metafoo.de>
Date: Wed, 10 Aug 2011 05:52:43 +0200
From: Lars-Peter Clausen <lars@...afoo.de>
To: Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Liam Girdwood <lrg@...com>
Cc: alsa-devel@...a-project.org,
device-drivers-devel@...ckfin.uclinux.org,
linux-kernel@...r.kernel.org,
Mike Frysinger <vapier.adi@...il.com>,
Lars-Peter Clausen <lars@...afoo.de>
Subject: [PATCH 3/4] ASoC: Blackfin: ADAU1373 eval board support
Add a machine driver to support the EVAL-ADAU1373 board connected to a
Analog Devices BF5XX evaluation board.
Signed-off-by: Lars-Peter Clausen <lars@...afoo.de>
---
sound/soc/blackfin/Kconfig | 14 ++
sound/soc/blackfin/Makefile | 2 +
sound/soc/blackfin/bfin-eval-adau1373.c | 202 +++++++++++++++++++++++++++++++
3 files changed, 218 insertions(+), 0 deletions(-)
create mode 100644 sound/soc/blackfin/bfin-eval-adau1373.c
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig
index fe9d548..9f537b4 100644
--- a/sound/soc/blackfin/Kconfig
+++ b/sound/soc/blackfin/Kconfig
@@ -27,6 +27,20 @@ config SND_SOC_BFIN_EVAL_ADAU1701
board connected to one of the Blackfin evaluation boards like the
BF5XX-STAMP or BF5XX-EZKIT.
+config SND_SOC_BFIN_EVAL_ADAU1373
+ tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards"
+ depends on SND_BF5XX_I2S
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_ADAU1373
+ select I2C
+ help
+ Say Y if you want to add support for the Analog Devices EVAL-ADAU1373
+ board connected to one of the Blackfin evaluation boards like the
+ BF5XX-STAMP or BF5XX-EZKIT.
+
+ Note: This driver assumes that first ADAU1373 DAI is connected to the
+ first SPORT port on the BF5XX board.
+
config SND_SOC_BFIN_EVAL_ADAV80X
tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards"
depends on SND_BF5XX_I2S && (SPI_MASTER || I2C)
diff --git a/sound/soc/blackfin/Makefile b/sound/soc/blackfin/Makefile
index 6018bf5..1bf86cc 100644
--- a/sound/soc/blackfin/Makefile
+++ b/sound/soc/blackfin/Makefile
@@ -21,6 +21,7 @@ snd-ad1980-objs := bf5xx-ad1980.o
snd-ssm2602-objs := bf5xx-ssm2602.o
snd-ad73311-objs := bf5xx-ad73311.o
snd-ad193x-objs := bf5xx-ad193x.o
+snd-soc-bfin-eval-adau1373-objs := bfin-eval-adau1373.o
snd-soc-bfin-eval-adau1701-objs := bfin-eval-adau1701.o
snd-soc-bfin-eval-adav80x-objs := bfin-eval-adav80x.o
@@ -29,5 +30,6 @@ obj-$(CONFIG_SND_BF5XX_SOC_AD1980) += snd-ad1980.o
obj-$(CONFIG_SND_BF5XX_SOC_SSM2602) += snd-ssm2602.o
obj-$(CONFIG_SND_BF5XX_SOC_AD73311) += snd-ad73311.o
obj-$(CONFIG_SND_BF5XX_SOC_AD193X) += snd-ad193x.o
+obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) += snd-soc-bfin-eval-adau1373.o
obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) += snd-soc-bfin-eval-adau1701.o
obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) += snd-soc-bfin-eval-adav80x.o
diff --git a/sound/soc/blackfin/bfin-eval-adau1373.c b/sound/soc/blackfin/bfin-eval-adau1373.c
new file mode 100644
index 0000000..901b1cc
--- /dev/null
+++ b/sound/soc/blackfin/bfin-eval-adau1373.c
@@ -0,0 +1,202 @@
+/*
+ * Machine driver for EVAL-ADAU1373 on Analog Devices bfin
+ * evaluation boards.
+ *
+ * Copyright 2011 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@...afoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+
+#include "../codecs/adau1373.h"
+
+static const struct snd_soc_dapm_widget bfin_eval_adau1373_dapm_widgets[] = {
+ SND_SOC_DAPM_LINE("Line In1", NULL),
+ SND_SOC_DAPM_LINE("Line In2", NULL),
+ SND_SOC_DAPM_LINE("Line In3", NULL),
+ SND_SOC_DAPM_LINE("Line In4", NULL),
+
+ SND_SOC_DAPM_LINE("Line Out1", NULL),
+ SND_SOC_DAPM_LINE("Line Out2", NULL),
+ SND_SOC_DAPM_LINE("Stereo Out", NULL),
+ SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_HP("Earpiece", NULL),
+ SND_SOC_DAPM_SPK("Speaker", NULL),
+};
+
+static const struct snd_soc_dapm_route bfin_eval_adau1373_dapm_routes[] = {
+ { "AIN1L", NULL, "Line In1" },
+ { "AIN1R", NULL, "Line In1" },
+ { "AIN2L", NULL, "Line In2" },
+ { "AIN2R", NULL, "Line In2" },
+ { "AIN3L", NULL, "Line In3" },
+ { "AIN3R", NULL, "Line In3" },
+ { "AIN4L", NULL, "Line In4" },
+ { "AIN4R", NULL, "Line In4" },
+
+ /* MICBIAS can be connected via a jumper to the line-in jack, since w
+ don't know which one is going to be used, just power both. */
+ { "Line In1", NULL, "MICBIAS1" },
+ { "Line In2", NULL, "MICBIAS1" },
+ { "Line In3", NULL, "MICBIAS1" },
+ { "Line In4", NULL, "MICBIAS1" },
+ { "Line In1", NULL, "MICBIAS2" },
+ { "Line In2", NULL, "MICBIAS2" },
+ { "Line In3", NULL, "MICBIAS2" },
+ { "Line In4", NULL, "MICBIAS2" },
+
+ { "Line Out1", NULL, "LOUT1L" },
+ { "Line Out1", NULL, "LOUT1R" },
+ { "Line Out2", NULL, "LOUT2L" },
+ { "Line Out2", NULL, "LOUT2R" },
+ { "Headphone", NULL, "HPL" },
+ { "Headphone", NULL, "HPR" },
+ { "Earpiece", NULL, "EP" },
+ { "Speaker", NULL, "SPKL" },
+ { "Stereo Out", NULL, "SPKR" },
+};
+
+static int bfin_eval_adau1373_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ int ret;
+ int pll_rate;
+
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret)
+ return ret;
+
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret)
+ return ret;
+
+ switch (params_rate(params)) {
+ case 48000:
+ case 8000:
+ case 12000:
+ case 16000:
+ case 24000:
+ case 32000:
+ pll_rate = 48000 * 1024;
+ break;
+ case 44100:
+ case 7350:
+ case 11025:
+ case 14700:
+ case 22050:
+ case 29400:
+ pll_rate = 44100 * 1024;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = snd_soc_dai_set_pll(codec_dai, ADAU1373_PLL1,
+ ADAU1373_PLL_SRC_MCLK1, 12288000, pll_rate);
+ if (ret)
+ return ret;
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, ADAU1373_CLK_SRC_PLL1, pll_rate,
+ SND_SOC_CLOCK_IN);
+
+ return ret;
+}
+
+static int bfin_eval_adau1373_codec_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ unsigned int pll_rate = 48000 * 1024;
+ int ret;
+
+ ret = snd_soc_dai_set_pll(codec_dai, ADAU1373_PLL1,
+ ADAU1373_PLL_SRC_MCLK1, 12288000, pll_rate);
+ if (ret)
+ return ret;
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, ADAU1373_CLK_SRC_PLL1, pll_rate,
+ SND_SOC_CLOCK_IN);
+
+ return ret;
+}
+static struct snd_soc_ops bfin_eval_adau1373_ops = {
+ .hw_params = bfin_eval_adau1373_hw_params,
+};
+
+static struct snd_soc_dai_link bfin_eval_adau1373_dai = {
+ .name = "adau1373",
+ .stream_name = "adau1373",
+ .cpu_dai_name = "bfin-i2s.0",
+ .codec_dai_name = "adau1373-aif1",
+ .platform_name = "bfin-i2s-pcm-audio",
+ .codec_name = "adau1373.0-001a",
+ .ops = &bfin_eval_adau1373_ops,
+ .init = bfin_eval_adau1373_codec_init,
+};
+
+static struct snd_soc_card bfin_eval_adau1373 = {
+ .name = "bfin-eval-adau1373",
+ .dai_link = &bfin_eval_adau1373_dai,
+ .num_links = 1,
+
+ .dapm_widgets = bfin_eval_adau1373_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(bfin_eval_adau1373_dapm_widgets),
+ .dapm_routes = bfin_eval_adau1373_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(bfin_eval_adau1373_dapm_routes),
+};
+
+static int bfin_eval_adau1373_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &bfin_eval_adau1373;
+
+ card->dev = &pdev->dev;
+
+ return snd_soc_register_card(&bfin_eval_adau1373);
+}
+
+static int __devexit bfin_eval_adau1373_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_card(card);
+
+ return 0;
+}
+
+static struct platform_driver bfin_eval_adau1373_driver = {
+ .driver = {
+ .name = "bfin-eval-adau1373",
+ .owner = THIS_MODULE,
+ .pm = &snd_soc_pm_ops,
+ },
+ .probe = bfin_eval_adau1373_probe,
+ .remove = __devexit_p(bfin_eval_adau1373_remove),
+};
+
+static int __init bfin_eval_adau1373_init(void)
+{
+ return platform_driver_register(&bfin_eval_adau1373_driver);
+}
+module_init(bfin_eval_adau1373_init);
+
+static void __exit bfin_eval_adau1373_exit(void)
+{
+ platform_driver_unregister(&bfin_eval_adau1373_driver);
+}
+module_exit(bfin_eval_adau1373_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@...afoo.de>");
+MODULE_DESCRIPTION("ALSA SoC bfin adau1373 driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bfin-eval-adau1373");
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists