Linux version 3.0.0 (root@memphis) (gcc version 4.4.6 20101016 (prerelease) (GCC) ) #6 PREEMPT Fri Aug 5 09:42:59 SGT 2011 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fe70000 (usable) BIOS-e820: 000000001fe70000 - 000000001fe7c000 (ACPI data) BIOS-e820: 000000001fe7c000 - 000000001fe80000 (ACPI NVS) BIOS-e820: 000000001fe80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection missing in CPU! DMI present. DMI: Intermec Technologies CV60R2/Solano System CR Platform, BIOS 6.00 02/12/09 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x1fe70 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 base 01FE80000 mask FFFF80000 uncachable 2 base 01FF00000 mask FFFF00000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. initial memory mapped : 0 - 01800000 Base memory trampoline at [c009c000] 9c000 size 12288 init_memory_mapping: 0000000000000000-000000001fe70000 0000000000 - 0000400000 page 4k 0000400000 - 001fc00000 page 2M 001fc00000 - 001fe70000 page 4k kernel direct mapping tables up to 1fe70000 @ 17fb000-1800000 ACPI: RSDP 000f7200 00014 (v00 PTLTD ) ACPI: RSDT 1fe7947a 0002C (v01 PTLTD RSDT 06040000 LTP 00000000) ACPI: FACP 1fe7bf64 00074 (v01 INTEL OSPREY2 06040000 MRJ! 00000001) ACPI: DSDT 1fe794a6 02ABE (v01 INTEL SolanoM2 06040000 MSFT 0100000E) ACPI: FACS 1fe7cfc0 00040 ACPI: BOOT 1fe7bfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) 0MB HIGHMEM available. 510MB LOWMEM available. mapped low ram: 0 - 1fe70000 low ram: 0 - 1fe70000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0001fe70 HighMem empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0001fe70 On node 0 totalpages: 130559 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 989 pages used for memmap Normal zone: 125587 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 20000000 (gap: 20000000:df800000) pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129538 Kernel command line: BOOT_IMAGE=(hd0,14)/linux/bzc1 root=/dev/hda2 ro resume=/dev/hda3 reboot=bios mce x11 pnp.debug console= vga=0x315 testing_only=\"this is got to be good. Now I can send in a very long line just like 2.4 and need not worry about the line long line just like 2.4 and need not worry about the lin8 long line just like 2.4 and need not worry about the lin9 being too long. What a great way to start a great year!!! Cool!\" Booting kernel: `' invalid for parameter `pnp.debug' PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Initializing CPU#0 Initializing HighMem for node 0 (00000000:00000000) Memory: 512452k/522688k available (3469k kernel code, 9784k reserved, 1255k data, 308k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0670000 - 0xff7fe000 ( 497 MB) lowmem : 0xc0000000 - 0xdfe70000 ( 510 MB) .init : 0xc149e000 - 0xc14eb000 ( 308 kB) .data : 0xc13634c6 - 0xc149d200 (1255 kB) .text : 0xc1000000 - 0xc13634c6 (3469 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:16 CPU 0 irqstacks, hard=df406000 soft=df408000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 799.771 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 1599.54 BogoMIPS (lpj=7997710) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 mce: CPU supports 5 MCE banks CPU: Intel(R) Pentium(R) III CPU - S 800MHz stepping 04 ACPI: Core revision 20110413 ACPI: setting ELCR to 0200 (from 02a0) Performance Events: no APIC, boot with the "lapic" boot parameter to force-enable it. no hardware sampling interrupt available. p6 PMU driver. ... version: 0 ... bit width: 32 ... generic registers: 2 ... value mask: 00000000ffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=1 bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing ACPI: Power Resource [NICP] (on) PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci 0000:00:00.0: [8086:1130] type 0 class 0x000600 pci 0000:00:02.0: [8086:1132] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xf8000000-0xfbffffff pref] pci 0000:00:02.0: reg 14: [mem 0xf4000000-0xf407ffff] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 pci 0000:00:1f.0: [8086:2440] type 0 class 0x000601 pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO pci 0000:00:1f.1: [8086:244b] type 0 class 0x000101 pci 0000:00:1f.1: reg 20: [io 0x1800-0x180f] pci 0000:00:1f.2: [8086:2442] type 0 class 0x000c03 pci 0000:00:1f.2: reg 20: [io 0x1820-0x183f] pci 0000:00:1f.3: [8086:2443] type 0 class 0x000c05 pci 0000:00:1f.3: reg 20: [io 0x1810-0x181f] pci 0000:00:1f.4: [8086:2444] type 0 class 0x000c03 pci 0000:00:1f.4: reg 20: [io 0x1840-0x185f] pci 0000:00:1f.5: [8086:2445] type 0 class 0x000401 pci 0000:00:1f.5: reg 10: [io 0x1c00-0x1cff] pci 0000:00:1f.5: reg 14: [io 0x1880-0x18bf] pci 0000:01:01.0: [104c:ac56] type 2 class 0x000607 pci 0000:01:01.0: reg 10: [mem 0xf4102000-0xf4102fff] pci 0000:01:01.0: supports D1 D2 pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:01.0: PME# disabled pci 0000:01:02.0: [1260:3890] type 0 class 0x000280 pci 0000:01:02.0: reg 10: [mem 0xf4100000-0xf4101fff] pci 0000:01:02.0: supports D1 D2 pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:02.0: PME# disabled pci 0000:01:08.0: [8086:2449] type 0 class 0x000200 pci 0000:01:08.0: reg 10: [mem 0xf4103000-0xf4103fff] pci 0000:01:08.0: reg 14: [io 0x2800-0x283f] pci 0000:01:08.0: supports D1 D2 pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:08.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1e.0: bridge window [mem 0xf4100000-0xf44fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x20000000-0xfebfffff] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci_bus 0000:02: [bus 02-05] partially hidden behind transparent bridge 0000:01 [bus 01-01] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0e) ACPI: PCI Interrupt Link [LNKA] (IRQs 5) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs *5) ACPI: PCI Interrupt Link [LNKD] (IRQs *5) ACPI: PCI Interrupt Link [LNKE] (IRQs *5) ACPI: PCI Interrupt Link [LNKF] (IRQs 5) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 5) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *7) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 32 bytes reserve RAM buffer: 000000000009f800 - 000000000009ffff reserve RAM buffer: 000000001fe70000 - 000000001fffffff Switching to clocksource pit pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000c3fff window] pnp 00:00: [mem 0x000c4000-0x000c7fff window] pnp 00:00: [mem 0x000c8000-0x000cbfff window] pnp 00:00: [mem 0x000cc000-0x000cffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000d8000-0x000dbfff window] pnp 00:00: [mem 0x000dc000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000e3fff window] pnp 00:00: [mem 0x000e4000-0x000e7fff window] pnp 00:00: [mem 0x000e8000-0x000ebfff window] pnp 00:00: [mem 0x000ec000-0x000effff window] pnp 00:00: [mem 0x20000000-0xfebfffff window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [mem 0x1ff00000-0x1fffffff] system 00:01: [mem 0x1ff00000-0x1fffffff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0010-0x001f] pnp 00:02: [io 0x0024-0x0025] pnp 00:02: [io 0x0028-0x0029] pnp 00:02: [io 0x002c-0x002d] pnp 00:02: [io 0x002e-0x002f] pnp 00:02: [io 0x0030-0x0031] pnp 00:02: [io 0x0034-0x0035] pnp 00:02: [io 0x0038-0x0039] pnp 00:02: [io 0x003c-0x003d] pnp 00:02: [io 0x004e-0x004f] pnp 00:02: [io 0x0050-0x0053] pnp 00:02: [io 0x0072-0x0077] pnp 00:02: [io 0x0080] pnp 00:02: [io 0x0090-0x009f] pnp 00:02: [io 0x00a4-0x00a5] pnp 00:02: [io 0x00a8-0x00a9] pnp 00:02: [io 0x00ac-0x00ad] pnp 00:02: [io 0x00b0-0x00b5] pnp 00:02: [io 0x00b8-0x00b9] pnp 00:02: [io 0x00bc-0x00bd] pnp 00:02: [io 0x0200-0x0207] pnp 00:02: [io 0x0290-0x0297] pnp 00:02: [io 0x0330-0x0331] pnp 00:02: [io 0x04d0-0x04d1] pnp 00:02: [io 0x1000-0x107f] pnp 00:02: [io 0x1180-0x11bf] pnp 00:02: [mem 0xff800000-0xffffffff] system 00:02: [io 0x0200-0x0207] has been reserved system 00:02: [io 0x0290-0x0297] has been reserved system 00:02: [io 0x0330-0x0331] has been reserved system 00:02: [io 0x04d0-0x04d1] has been reserved system 00:02: [io 0x1000-0x107f] has been reserved system 00:02: [io 0x1180-0x11bf] has been reserved system 00:02: [mem 0xff800000-0xffffffff] could not be reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: [io 0x0000-0x000f] pnp 00:03: [io 0x0081-0x008f] pnp 00:03: [io 0x00c0-0x00df] pnp 00:03: [dma 4] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:04: [io 0x00f0-0x00fe] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x0070-0x0071] pnp 00:05: [irq 8] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [io 0x0061] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [io 0x03f8-0x03ff] pnp 00:08: [irq 4] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:09: [io 0x02f8-0x02ff] pnp 00:09: [irq 3] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0a: Plug and Play ACPI device, IDs PNP4972 (disabled) pnp 00:0b: [io 0x02e8-0x02ef] pnp 00:0b: [irq 12] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm PCI: max bus depth: 2 pci_try_num: 3 pci 0000:00:1e.0: BAR 9: assigned [mem 0x20000000-0x23ffffff pref] pci 0000:01:01.0: BAR 9: assigned [mem 0x20000000-0x23ffffff pref] pci 0000:01:01.0: BAR 10: assigned [mem 0x24000000-0x27ffffff] pci 0000:01:01.0: BAR 7: assigned [io 0x2000-0x20ff] pci 0000:01:01.0: BAR 8: assigned [io 0x2400-0x24ff] pci 0000:01:01.0: CardBus bridge to [bus 02-05] pci 0000:01:01.0: bridge window [io 0x2000-0x20ff] pci 0000:01:01.0: bridge window [io 0x2400-0x24ff] pci 0000:01:01.0: bridge window [mem 0x20000000-0x23ffffff pref] pci 0000:01:01.0: bridge window [mem 0x24000000-0x27ffffff] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1e.0: bridge window [mem 0xf4100000-0xf44fffff] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x23ffffff pref] pci 0000:00:1e.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered pci 0000:01:01.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff] pci_bus 0000:00: resource 9 [mem 0x20000000-0xfebfffff] pci_bus 0000:00: resource 10 [io 0x0d00-0xffff] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xf4100000-0xf44fffff] pci_bus 0000:01: resource 2 [mem 0x20000000-0x23ffffff pref] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 6 [mem 0x000d0000-0x000d3fff] pci_bus 0000:01: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:01: resource 8 [mem 0x000e0000-0x000e3fff] pci_bus 0000:01: resource 9 [mem 0x20000000-0xfebfffff] pci_bus 0000:01: resource 10 [io 0x0d00-0xffff] pci_bus 0000:02: resource 0 [io 0x2000-0x20ff] pci_bus 0000:02: resource 1 [io 0x2400-0x24ff] pci_bus 0000:02: resource 2 [mem 0x20000000-0x23ffffff pref] pci_bus 0000:02: resource 3 [mem 0x24000000-0x27ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling PCI: CLS 32 bytes, default 32 Simple Boot Flag at 0x36 set to 0x1 Switched to NOHz mode on CPU #0 NTFS driver 2.1.30 [Flags: R/W]. Btrfs loaded msgmni has been set to 1000 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 vga16fb: initializing vga16fb: mapped to 0xc00a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Marking TSC unstable due to TSC halts in idle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (46 C) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0b: ttyS3 at I/O 0x2e8 (irq = 12) is a 16550A Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel i815 Chipset agpgart-intel 0000:00:00.0: detected gtt size: 65536K total, 65536K mappable agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x244b rev 0x05) piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807 Probing IDE interface ide0... hda: FUJITSU MHW2040AT, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-gd driver 1.18 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 > Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2 Copyright (c) 2007-2011 Intel Corporation. pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:01:08.0: power state changed by ACPI to D0 e100 0000:01:08.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 e100 0000:01:08.0: PCI INT A -> Link[LNKE] -> GSI 5 (level, low) -> IRQ 5 e100 0000:01:08.0: PME# disabled e100 0000:01:08.0: eth0: addr 0xf4103000, irq 5, MAC addr 00:10:40:08:50:e8 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Fusion MPT base driver 3.04.19 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.19 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1f.2: setting latency timer to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 5, io base 0x00001820 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered uhci_hcd 0000:00:1f.4: PCI INT C -> Link[LNKH] -> GSI 7 (level, low) -> IRQ 7 uhci_hcd 0000:00:1f.4: setting latency timer to 64 uhci_hcd 0000:00:1f.4: UHCI Host Controller uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: irq 7, io base 0x00001840 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1 i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com EDAC MC: Ver: 2.1.0 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 Intel ICH 0000:00:1f.5: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 51300 usecs (2466 samples) intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801BA-ICH2 with STAC9750,51 at irq 5 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8007 buckets, 32028 max) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP bic registered TCP cubic registered TCP highspeed registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' rtc_cmos 00:05: setting system clock to 2011-08-10 22:32:20 UTC (1313015540) VFS: Mounted root (reiserfs filesystem) readonly on device 3:2. Freeing unused kernel memory: 308k freed Adding 2047996k swap on /dev/hda3. Priority:-1 extents:1 across:2047996k Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb e100 0000:01:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 mtrr: base(0xf8000000) is not aligned on a size(0x3000000) boundary