| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 11 Aug 2011 13:55:55 +1000
From: Stephen Rothwell <sfr@...b.auug.org.au>
To: Chris Ball <cjb@...top.org>
Cc: linux-next@...r.kernel.org, linux-kernel@...r.kernel.org,
Richard Zhu <richard.zhu@...aro.org>,
Shawn Guo <shawn.guo@...aro.org>
Subject: linux-next: manual merge of the mmc tree with Linus' tree
Hi Chris,
Today's linux-next merge of the mmc tree got a conflict in
drivers/mmc/host/sdhci-esdhc-imx.c between commit 913413c307c9 ("mmc:
sdhci-esdhc-imx: extend card_detect and write_protect support for mx5")
from Linus' tree and commit 612e807e4852 ("mmc: sdhci-esdhc-imx: Enable
ADMA2") from the mmc tree.
I fixed it up (I think - see below) anc can carry the fix as necessary.
--
Cheers,
Stephen Rothwell sfr@...b.auug.org.au
diff --cc drivers/mmc/host/sdhci-esdhc-imx.c
index 9ebfb4b,53b2ec1..0000000
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@@ -32,6 -31,15 +33,14 @@@
#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
/*
+ * There is INT DMA ERR mis-match between eSDHC and STD SDHC SPEC
+ * Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design,
+ * but bit28 is used as the INT DMA ERR in fsl eSDHC design.
+ * Define this macro DMA error INT for fsl eSDHC
+ */
+ #define SDHCI_INT_VENDOR_SPEC_DMA_ERR 0x10000000
+
-#define ESDHC_FLAG_GPIO_FOR_CD (1 << 0)
+ /*
* The CMDTYPE of the CMD register (offset 0xE) should be set to
* "11" when the STOP CMD12 is issued on imx53 to abort one
* open ended multi-blk IO. Otherwise the TC INT wouldn't
@@@ -140,14 -115,35 +170,36 @@@ static void esdhc_writel_le(struct sdhc
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
+ struct esdhc_platform_data *boarddata = &imx_data->boarddata;
-
- if (unlikely((reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)
- && (boarddata->cd_type == ESDHC_CD_GPIO)))
- /*
- * these interrupts won't work with a custom card_detect gpio
- */
- val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+ u32 data;
+
+ if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
- if (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD)
++ if (boarddata->cd_type == ESDHC_CD_GPIO)
+ /*
+ * these interrupts won't work with a
+ * custom card_detect gpio
+ * (only applied to mx25/35)
+ */
+ val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+
+ if (val & SDHCI_INT_CARD_INT) {
+ /*
+ * clear D3CD bit and set D3CD bit to avoid
+ * missing the card interrupt
+ * this is a eSDHC controller problem so that
+ * we need to apply the following workaround
+ * clear and set D3CD bit will make eSDHC
+ * re-sample the card interrupt, In case
+ * a card interrupt was lost, re-sample it by
+ * the following steps.
+ */
+ data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
+ data &= ~SDHCI_CTRL_D3CD;
+ writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+ data |= SDHCI_CTRL_D3CD;
+ writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
+ }
+ }
if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
&& (reg == SDHCI_INT_STATUS)
@@@ -377,29 -316,22 +439,30 @@@ static int __devinit sdhci_esdhc_imx_pr
clk_enable(clk);
pltfm_host->clk = clk;
- if (!cpu_is_mx25())
+ if (!is_imx25_esdhc(imx_data))
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
- if (cpu_is_mx25() || cpu_is_mx35()) {
+ if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
- host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+ host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
+ | SDHCI_QUIRK_BROKEN_ADMA;
- /* write_protect can't be routed to controller, use gpio */
- sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro;
- }
- if (!(cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx51()))
+ if (is_imx53_esdhc(imx_data))
imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
- boarddata = host->mmc->parent->platform_data;
- if (boarddata) {
+ boarddata = &imx_data->boarddata;
+ if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
+ if (!host->mmc->parent->platform_data) {
+ dev_err(mmc_dev(host->mmc), "no board data!\n");
+ err = -EINVAL;
+ goto no_board_data;
+ }
+ imx_data->boarddata = *((struct esdhc_platform_data *)
+ host->mmc->parent->platform_data);
+ }
+
+ /* write_protect */
+ if (boarddata->wp_type == ESDHC_WP_GPIO) {
err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
if (err) {
dev_warn(mmc_dev(host->mmc),
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists